Running Update Syntax At Set Time
Feb 17, 2006
Hi
Is it possible for me to run an update syntax at a certain time say midnight for example?
I'm trying to update a bit field in my table (which acts as a checkbox in my Access front end), but only if three date fields are before todays date. The dates in question are in two other tables.
If so how would I go about doing this?
Thanks
View 3 Replies
ADVERTISEMENT
Oct 3, 2015
I hope to update a DateTime column value with a Time input parameter.  Poor attempt below but it looks like the @ApptTime param is coming in as 10:45:00.0000000 and I might have an existing @SendOnDate as: 2015-10-05 07:00:00.000...I hope to end up with 2015-10-05 10:45:00.000
ALTER PROCEDURE [dbo].[SendEditUPDATE]
@QuePoolID int=null
,@ApptTime time(7)
,@SendOnDate datetime
[code]...
View 14 Replies
View Related
Aug 7, 2003
How do I write an update query to update a column in TabA with the information from other records in TabA?
View 2 Replies
View Related
Nov 11, 2013
I want to update the time in a datetime field with the current time.
Fields current value is:
2013-11-11 00:00:00.000
I want to insert this into another table and when I do I want to grab the current time and update that field.
field name: picked_dt
Table: oeordlin
or is there a way through sql to update the time when the picked_dt is updated?
View 2 Replies
View Related
Feb 18, 2006
I do realize that his could be posted in a few spots but I think the answer is in the SQL.
I have a ASP.NET page, with a SqlDataSource, Text Box and Calendar Controls. I have the textbox and calendar controls eval'ed to the same sql data source DateTime Field. The text box is formatted eval to small time and the calendars eval has no formatting.
ex:
<asp:TextBox ID="START_TIME" Text='<%# Eval("EVENT_START","{0:t}") %>' runat=server Width=200></asp:TextBox>
I want to merge the two controls; one has the date the other has the time when I update the pages data to the SqlDataSource field EVENT_START. I've tried a couple of methods, but I would like some other opinions. As Sql server only supports date and time together I am storing the two together.
I could merge the two together in the code behind on the update button's event handler or merge the two during the update query using parameters.
Not that I could get an illegal date for the calendar control, but I could get garbage from the textfield time. So I still would have to do validation on the text field before the SQL server could do the update.
There's a few ways to go about this, so I was wondering if anyone else has figured out an elegant way to handle it.
wbochar
View 1 Replies
View Related
Mar 31, 2006
Wanted to verify how I would run a replace...it's actually my first time doing a replace, but figure it's worse to screw this up than just a simple SELECT :)
The table/field is:
SOHeader.ShiptoID
I need to go through and replace only values which are equal to '9999' with the word 'DEFAULT' instead for all rows in that column.
View 9 Replies
View Related
Jun 6, 2007
Hello,
If my SSIS runs every day, how can I "know" that I'm running it for the first time?
I need an SQL Select1 statement to execute the first day that my flow starts (to get all the old data) and after that SQL Select2 statement should always execute (to get the latest data).
How is this possable?
Thank you.
View 14 Replies
View Related
Sep 7, 2005
Hi (again)
I know that it's very simple question but since I know that many gurus are here, I want to ask abt it.
Ssql = "Update Holder set PID='temp_PID',CMSN=sMSN,CSN=sMSN1 where HID= " & temp_HID
when i run that sql from VB, it gives error as INVALID COLUMN name(sMSN/sMSN1).., it is for both sMSN and sMSN1 . But both of these sMSN and sMSN1 are numeric in the table. so I think I don't need for quotes.
pls tell me what is the correct syntax for it?
View 6 Replies
View Related
Jun 5, 2001
Hi there!,
Problem: I schedule a job that calls a stored procedure which loads around 1.5 million records. The Job takes 19 hrs to complete. However, if i run that stored procedure manually in Query Analyser it takes only 45 minutes..
Did anyone faced this problem? Is this known problem..Any suggestions/recommendations?
thank you.
regards,
Nana
View 6 Replies
View Related
May 14, 2008
I am re-writing a old query that update's it's value based on values at run time. Is there anyway to accomplish the following query where column s1.AI referances the values that were updated during run-time.
I want to avoid a Loop (i.e. cursor or a CTE).
Please help!
Declare @Stage Table(StartDate datetime,BenefitInterestID INT PRIMARY KEY, Amount MONEY, InterestAmount MONEY, Interest DECIMAL(10, 4), ai DECIMAL(10, 4))
Insert Into @Stage
Select
convert(datetime,'2006-12-01 00:00:00.000',101) as StartDate,1 as BenefitInterestID,1701.00 as amount,79.605 as InterestAmount ,0.1000 as Interest,0.0000 as ai
Union all
select '2007-12-01 00:00:00.000',2,172.80,7.92,0.0500,0
Union all
select '2008-12-01 00:00:00.000',4,0.00,0.00,0.0700,0
UPDATEs1
SETs1.ai = s1.Interest * coalesce((SELECT SUM(coalesce(s2.Amount,0) + coalesce(s2.InterestAmount,0)+coalesce(s2.ai,0)) FROM @Stage AS s2 WHERE s2.StartDate < s1.StartDate ),0)
FROM@Stage AS s1
select * from @Stage
My desired Results are
2006-12-01 00:00:00.00011701.0079.6050.10000.0000
2007-12-01 00:00:00.0002172.807.920.050089.0303
2008-12-01 00:00:00.00040.000.000.0700143.5300
But I am geting
2006-12-01 00:00:00.00011701.0079.6050.10000.0000
2007-12-01 00:00:00.0002172.807.920.050089.0303
2008-12-01 00:00:00.00040.000.000.0700137.2928
Due to as you can see on row 3 that the amount does not factor in the previous Years ai column when I sum, due to the update takes place at runtime.
Please help!
View 15 Replies
View Related
Dec 19, 2007
Hi all
As you know when you run a piece of TSQL scrypt in Query Analizer
at the bottom of the page , sql-server will show you the Time of completion of your code....is there any way to capture this time
from SQL-Server environment and use it in the Front-End Application
to inform the user?
Kind regards.
View 2 Replies
View Related
Apr 19, 2015
I am having 100 of flat files need to load in respective staging table.I want to create table on run time as per filename input.suppose if input filename is ABC then table name should be Staging_ABC if file name is XYZ then it should be Staging_XYZ.Table structure is below need to create at run time
CREATE TABLE Staging_'Filename'(
[COL001] [varchar](4000) NULL,
[Id] [int] IDENTITY(1,1) NOT NULL,
[LoadDate] [datetime] NOT NULL default getdate()
)
View 2 Replies
View Related
Apr 10, 2007
Hello
I am trying to update a column containing URL's and include the "www." which had previously been omitted on many URL's in the column. But I get an error when trying to UPDATE
I have tried:
UPDATE table_nameSET URL = http://www.a2zdom.com/*WHERE URL = http://a2zdom.com/*
I have tried and left out the http: and also the /* but nothing works. Is this type of update not possible?
Thanks
View 7 Replies
View Related
Jun 12, 2007
string cmdTxt = "Update penberry_SubjectName set SubjectLeaderId IN (
SELECT userid FROM aspnet_users WHERE username = @subjectLeaderName)
where SubjectCode = @subjectCode";
SqlConnection sqlconn = new SqlConnection(sqlConnStr);
SqlCommand sqlCmd = new SqlCommand(cmdTxt, sqlconn);
sqlCmd.Parameters.AddWithValue("@subjectLeaderName", subjectLeaderName);
sqlCmd.Parameters.AddWithValue("@subjectCode", subjectCode);
sqlconn.Open();
sqlCmd.ExecuteNonQuery(); hi guys i got this error from my program.Can anyone help me out?
View 9 Replies
View Related
Feb 3, 2008
Hi here's a bit of code. What am I doing wrong here? Visual Studio isn't even accepting the Set word on line 56. It deletes it everytime. What am I doing wrong here? Why is Visual studio putting the parenthese around the table name in 55? I generated an update query for my Websitetableadapter. Here it is:
UPDATE [tblWebSite] SET [Rating] = @Rating, WHERE (([WebSiteID] = @Original_WebSiteID))
How do I use this to update the Rating column after I've done my calculation below?
1 Imports RatingsTableAdapters2 3 4 Partial Class admin_ratings5 Inherits System.Web.UI.Page6 7 Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load8 Dim I As Integer = 09 Dim J As Integer = 010 Dim Rating As Integer11 Dim Rate As Decimal12 Dim tblwebsiteAdapter As New tblWebSiteTableAdapter13 Dim tblWebsite As ratings.tblWebSiteDataTable14 tblWebsite = tblwebsiteAdapter.GetData()15 For Each tblwebsiteRow As ratings.tblWebSiteRow In tblWebsite16 Rate = 017 Dim tblLinkAdapter As New tblLinkTableAdapter18 Dim tblLink As ratings.tblLinkDataTable19 Dim tblLinkTot As ratings.tblLinkDataTable20 tblLink = tblLinkAdapter.GetSuccessfulExchanges(tblwebsiteRow.WebSiteID)21 tblLinkTot = tblLinkAdapter.GetTotalLinks(tblwebsiteRow.WebSiteID)22 For Each tbllinkRow As ratings.tblLinkRow In tblLink23 If tbllinkRow.LinkID < 1 Then24 I = 0.125 Else : I = I + 126 End If27 Next28 If I <> 0 Then29 For Each tbllinktotrow As ratings.tblLinkRow In tblLinkTot30 If tbllinktotrow.LinkID < 1 Then31 J = 0.132 Else : J = J + 133 End If34 Next35 End If36 If I <> 0 And J <> 0 Then37 38 Rate = I / J39 If Rate <= 0.3 Then40 Rate = 041 End If42 If Rate <= 0.5 Then43 Rate = 144 End If45 If Rate <= 0.65 Then46 Rate = 247 End If48 If Rate <= 0.75 Then49 Rate = 350 End If51 End If52 53 Response.Write(tblwebsiteRow.WebSiteID & " " & tblwebsiteRow.SiteURL & " Rating: " & Rate & "54 I = 055 J = 056 Update(tblWebsite)57 Rating = Rate58 where(tblwebsiteRow.WebSiteID <> 0)59 Next60 End Sub61 End Class
View 34 Replies
View Related
May 12, 2008
Hi All,The following code runs without error but does not update the database. Therefore I must be missing something.I am sure that this a simple task but as newbie to asp.net its got me stumpted. Protected Sub updatePOInfo_Updating(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.SqlDataSourceCommandEventArgs) Handles updatePOInfo.Updating Dim quantity As Integer Dim weight As Integer Dim packed As Integer quantity = CInt(bagsOnPallet.Text) weight = CInt(lbsInBags.SelectedValue) packed = weight * quantity e.Command.Parameters("@packedLbs").Value += packed e.Command.Parameters("@AvailableLbs").Value -= packed End Sub
View 4 Replies
View Related
Aug 2, 2005
Hi,I have an update statement which works fine in MS ACCESS: "update cbp_prest4 a, cbp_prest3 b set
a.tempmm_88=b.tempmm,a.tanpay_88=b.tanpay where
a.fipstate2=b.fipstate2 and a.fipscty2=b.fipscty2 and a.naiccode=b.naiccode
and b.years='88'"
But somehow when I converted my MS ACCESS database to SQL server database, the above statement is not working. I am getting an error saying that "incorrect syntax at a, line1".Can any help me in this query.Thanks,Ajith
View 1 Replies
View Related
Dec 5, 2000
hi, someone please tell me what's wrong with this update statement
It's supposed to get values for employee location from a test table, based on the first name and last name match, and update the outer table. I get this error...
Server: Msg 170, Level 15, State 1, Line 1
Line 1: Incorrect syntax near 'a'.
update abs_employee a
set a.office_location =
(select b.Location
from abs_emptest b
where b.lastname = a.last_name and
b.firstname = a.first_name)
View 2 Replies
View Related
Jul 16, 2004
Is there anything like below in SQL Server 7.0 ?
update (table1 inner join table2 on table1.sno = table2.sno1) set .....
Please advice.
Thanks,
Sam
View 7 Replies
View Related
Jul 23, 2005
Hi all,I have just written a sql statement where I want two fields updatedfrom another table. The statement like so:update kpidmatterset clientcode,clientname = (select clientcode, clientnamefrom clientconversionwhere (clientcode = kpidmatter.clintcode))where exists(select clientcode, clientnamefrom clientconversionwhere (clientcode = kpidmatter.clintcode))This refuses to work.The statement I based this on worked (below) but only updated onefield (teach me for being too ambitions!). Can anyone see anythingobvious? I know that a DDL and sample data is far more useful but inthis case I think there's a simple syntax problem.I'd be most grateful if someone could spot my error.SamWorking sample:UPDATE kpidmatterSET clientpartner = (SELECT ContactNameFROM newnamesWHERE (feeearnercode = kpidmatter.clientpartnercode))where exists(SELECT ContactNameFROM newnamesWHERE (feeearnercode = kpidmatter.clientpartnercode))
View 6 Replies
View Related
Jul 20, 2005
Field Names: NOs Code Code1a UniqueID61 10 888 1062 10 888 1163 10 888 12Logic: If Count(code >1) & Count (Code1a >1)Update the (Nos) to EQUAL the same Value.ALL the Nos for the above examble should be the same value forall three records whether it's 61 for all three records of anyof the other two numbers, it doesn't matter as long as the equal the same value.How can this be done via sql?
View 5 Replies
View Related
Jul 20, 2005
I'm new to SQL and can't figure out how to update my table(StoreItemStatus) that contains the current status for items in eachstore (STORE_KEY, ITEM_KEY, STATUS,...).I get updated status info in a table (I'll call it NewInfo) thathas similar fields. NewInfo may contain multiple records for eachStore/Item, but I will just use the latest status. I'm not sure howto update StoreItemStatus using each record of NewInfo. Any advice isgreatly appreciatedThanks,Paul
View 14 Replies
View Related
Oct 29, 2007
Team,
Our product was written against an older version of SQL and the non-ANSI standard join operators (*= and =*). Our group is now looking to move our database to SQL Server 2005.
We are now faced with updating a lot of legacy queries that use this method of joins and I was hoping for a shove in the right direction.
I have run across a query similar to the following:
SELECT <many fields go here>
FROM a, b, c, d, e, f, g, h
WHERE a.fld1 *= d.fld1
AND e.fld3 *= h.fld3
The query, as it is with the non-ANSI join operators, returns a single record. For the life of me, I cannot figure out how to format the FROM statement to create the LEFT OUTER JOIN statement(s) to get the query to work.
The SQL Server 2005 books online seems to be lacking in the area of examples where you have multiple joins using different tables; they focus on one table joining against multiple tables instead.
Anyone have any reading suggestions or other ideas on how to get this to work?
Thanks.
Richard
View 13 Replies
View Related
Dec 18, 2007
I€™ve developed a trigger for SQL 2000 that works great in my test environment, but is a bit inconsistent in my production environment. The goal of this trigger is to find and update the row that was just entered in the OCNTACT2 table. It takes the highest integer value from CONTACT2.UPRONUM (yes, it€™s an nvarchar field), increments it by one, then updates the CONTACT2.UPRONUM field for the newly inserted row.
Does anyone see anything wrong with this trigger? Thank you for reading.
CREATE TRIGGER Update_UPRONUM_For_Webgrabber
ON CONTACT2
AFTER INSERT
AS
BEGIN
SET ROWCOUNT 1
UPDATE CONTACT2
SET CONTACT2.UPRONUM = CAST(C.tempColumn AS int) + 1
FROM CONTACT2 CROSS JOIN
(Select top 1 cast(upronum as int) as tempColumn from CONTACT2 AS CONTACT2_1 WHERE
(UPRONUM NOT LIKE '%[,]%') AND (UPRONUM NOT LIKE '%[a-z]%') AND (UPRONUM NOT LIKE '%[A-Z]%')
order by cast(upronum as int) desc) AS C
WHERE (CONTACT2.UPRONUM IS NULL OR CONTACT2.UPRONUM = '') AND (CONTACT2.UCOMPBY = 'WEB')
AND (CONTACT2.UWEBDATE > '12/13/2007')
SET ROWCOUNT 0
END
View 9 Replies
View Related
Feb 8, 2007
I have a date/time field with a sql format of "datetime" The actualdate/time data format is MM/DD/YYYY^hh:mm:ss:pm or "1/25/200712:00:16 AM" Both the date and time are combined on the same fieldwith a space seperating the two.I need to run a query on this date/time field using the criteria oftoday's date so if I want to search all records with todays date, Ineed to query on this field. I don't need the time, but just today'sdate (MM/DD/YYYY) portion of the field.Thanks,Brian
View 7 Replies
View Related
Jan 26, 2006
I have several sequence containers in one package that fire off execute package tasks. I would like each of the sequence containers to start at the same time when the job starts running. However when I set them up to do that, i get an error that the variable cannot be read because it is locked. I have the variables setup as readonly so not sure why they are being locked. When I run the package and have each sequence container fire off after the previous one ends it runs fine.
Any ideas on how to get around this?
Thanks!
View 1 Replies
View Related
Oct 26, 2007
I have tried the following, the update part i snot working. Any idea why? alter PROCEDURE dbo.SP_FeaturedClassifieds
@PageIndex INT,
@NumRows INT,
@FeaturedClassifiedsCount INT OUTPUT
AS
BEGIN
select @FeaturedClassifiedsCount = (Select Count(*) From classifieds_Ads Where AdStatus=100 And Adlevel=50 )
Declare @startRowIndex INT;
Set @startRowIndex = (@PageIndex * @NumRows) + 1;
With FeaturedClassifieds as (Select ROW_NUMBER() OVER (Order By FeaturedDisplayedCount * (1-(Weight-1)/100) ASC) as
Row, Id, PreviewImageId, Title, DateCreated, FeaturedDisplayedCountFrom
classifieds_Ads
WhereAdStatus=100 And AdLevel=50
)
SelectId, PreviewImageId, Title, DateCreated, FeaturedDisplayedCount
From
FeaturedClassifieds
Where
Row between@startRowIndex And @startRowIndex+@NumRows-1
Update FeaturedClassifiedsSET FeaturedDisplayedCount = FeaturedDisplayedCount+1
Where
Row between
@startRowIndex And @startRowIndex+@NumRows-1
END
I have tried function too for this, but function can not update table I guess.... Can I call stored procedure for each column? How?
I thought the code above would work? What am I missing?
View 3 Replies
View Related
Mar 24, 2008
Hello all,
Iv been making a lot of progress on my first functional webapp, but I cannot get this bit of code to work correctly. I think my UPDATE SQL statement is where the problem is. It works fine the first time through when there is no Session("estimateid") set, but after that is set it gives me error this on line 40:
Incorrect syntax near '('.
1 Dim CustID As Integer
2
3 Dim DbConnection As SqlConnection
4 DbConnection = New SqlConnection(ConfigurationManager.ConnectionStrings("harringtonairdb").ConnectionString)
5 DbConnection.Open()
6 Dim DbCommand As SqlCommand
7
8 If Session("estimateid") = 0 Then
9 Dim DbSqlInsert As String
10 DbSqlInsert = "INSERT INTO tblcustomers (strname, strAddress1, strAddress2, strCity, strState, strZip, strPhone, strEmail, strContact) VALUES (@name, @address1, @address2, @city, @state, @zip, @phone, @email, @contact)" & "SELECT @@IDENTITY AS CustID"
11 DbCommand = New SqlCommand(DbSqlInsert, DbConnection)
12 Else
13 Dim DbSqlUpdate As String
14 DbSqlUpdate = "UPDATE tblcustomers SET (strcustname=@name, straddress1=@address1, straddress2=@address2, strcity=@city, strstate=@state, strzip=@zip, strphone=@phone, stremail=@email, strcontact=@contact) JOIN tblestimates ON pkcustomerid WHERE pkestimateid=@estimateid"
15 DbCommand = New SqlCommand(DbSqlUpdate, DbConnection)
16 DbCommand.Parameters.AddWithValue("@estimateid", Session("estimateid"))
17
18 End If
19
20 DbCommand.Parameters.AddWithValue("@name", txtCustName.Text)
21 DbCommand.Parameters.AddWithValue("@address1", txtCustAddress1.Text)
22 DbCommand.Parameters.AddWithValue("@address2", txtCustAddress2.Text)
23 DbCommand.Parameters.AddWithValue("@city", txtCustCity.Text)
24 DbCommand.Parameters.AddWithValue("@state", txtCustState.Text)
25 DbCommand.Parameters.AddWithValue("@zip", txtCustZip.Text)
26 DbCommand.Parameters.AddWithValue("@phone", txtCustPhone.Text)
27 DbCommand.Parameters.AddWithValue("@email", txtCustEmail.Text)
28 DbCommand.Parameters.AddWithValue("@contact", txtCustTimes.Text)
29
30
31 If Session("estimateid") = 0 Then
32 CustID = Convert.ToInt32(DbCommand.ExecuteScalar())
33 DbCommand.Dispose()
34 Dim DbSqlInsert As String
35 DbSqlInsert = "INSERT INTO tblestimates (fkcustomerid) VALUES (@customerid)" & "SELECT @@IDENTITY AS EstimateID"
36 DbCommand = New SqlCommand(DbSqlInsert, DbConnection)
37 DbCommand.Parameters.AddWithValue("@customerid", CustID)
38 Session.Add("estimateid", Convert.ToInt32(DbCommand.ExecuteScalar()))
39 Else
40 DbCommand.ExecuteNonQuery()
41 End If
42
43 DbConnection.Close()
44 DbCommand.Dispose()
View 3 Replies
View Related
May 2, 2008
Hi forum, im converting some code and have an issue with th following code!!! many thanks for good advice, Paul
Line 55: SQLa = "UPDATE counted SET " & y & " = " & intClick & ", total = " & intTotal & " WHERE ID = " & RSpc.Fields("pc").ValueLine 56: Conn.Execute(SQLa)
System.Runtime.InteropServices.COMException: Syntax error in UPDATE statement.
Dim SQLa As String
View 8 Replies
View Related
Apr 13, 2004
I have place a lblmessage.text = ex.Message to trace what happen and it show me a syntax error in update happen. I don't know whats wrong with my syntax. Can someone help me on this?
<%@ Page Language = "vb" Debug="true" %>
<%@ import namespace= "system.data" %>
<%@ import namespace= "system.data.oledb" %>
<script runat="server">
'set up connection
dim conn as new oledbconnection _
("provider = microsoft.jet.oledb.4.0;" & _
"data source = c:aspnetdataanking.mdb")
sub page_load(sender as object, e as eventargs)
if not page.ispostback then
filldatagrid()
end if
end sub
sub submit (sender as object, e as eventargs)
'insert new data
dim i,j as integer
dim params(7) as string
dim strtext as string
dim blngo as boolean = true
j = 0
for i = 0 to addpanel.controls.count -1
if addpanel.controls(i).gettype is _
gettype (textbox) then
strtext = ctype(addpanel.controls(i), _
textbox).text
if strtext <> "" then
params(j) = strtext
else
blngo = false
lblmessage.text = lblmessage.text & _
"you forgot to enter a value for " & _
addpanel.controls (i).id & "<p>"
lblmessage.style ("forecolor")= "red"
end if
j=j+1
end if
next
if not blngo then
exit sub
end if
dim strsql as string = "INSERT INTO tblusers " & _
"(firstname, lastname, address, city, state, " & _
"zip, phone) values (" & _
"'" & params(0) & "'," & _
"'" & params(1) & "'," & _
"'" & params(2) & "'," & _
"'" & params(3) & "'," & _
"'" & params(4) & "'," & _
"'" & params(5) & "'," & _
"'" & params(6) & "')"
executestatement(strsql)
filldatagrid()
end sub
sub dgdata_edit (sender as object, e as datagridcommandeventargs)
filldatagrid(e.item.itemindex)
end sub
sub dgdata_delete (sender as object, e as datagridcommandeventargs)
dim strsql as string = "DELETE FROM tblusers " & _
"WHERE userid = " & e.item.itemindex + 1
executestatement(strsql)
filldatagrid()
end sub
sub dgdata_update (sender as object, e as datagridcommandeventargs)
if updatedatastore(e) then
filldatagrid(-1)
end if
end sub
sub dgdata_cancel (sender as object, e as datagridcommandeventargs)
filldatagrid(-1)
end sub
sub dgdata_pageindexchanged (sender as object, e as datagridpagechangedeventargs)
dgdata.databind()
end sub
function updatedatastore (e as datagridcommandeventargs) as boolean
dim i,j as integer
dim params(7) as string
dim strtext as string
dim blngo as boolean = true
j = 0
for i =1 to e.item.cells.count - 3
strtext = ctype(e.item.cells(i).controls(0), _
textbox).text
if strtext <> "" then
params(j) = strtext
blngo = true
j= j+1
else
blngo = false
lblmessage.text = lblmessage.text & _
"you forgot to enter a value<p>"
end if
next
if not blngo then
return false
exit function
end if
dim strsql as string = "update tblusers SET " & _
"Firstname.value = '" & params(0) & "'," & _
"lastname.value = '" & params(1) & "'," & _
"address.value = '" & params(2) & "'," & _
"city.value = '" & params(3) & "'," & _
"state.value = '" & params(4) & "'," & _
"zip.value = '" & params(5) & "'," & _
"phone.value = '" & params(6) & "'," & _
" WHERE Userid = " & ctype(e.item.cells(0). _
controls(1), label).text
executestatement (strsql)
return blngo
end function
sub filldatagrid (optional editindex as integer = -1)
' open connection
dim objcmd as new oledbcommand _
("select * from tblusers", conn)
dim objreader as oledbdatareader
try
objcmd.connection.open ()
objreader = objcmd.executereader()
catch ex as exception
lblmessage.text = "error retrieving from the " & _
"database."
end try
dgdata.datasource = objreader
if not editindex.equals(nothing) then
dgdata.edititemindex = editindex
end if
dgdata.databind()
objreader.close
objcmd.connection.close()
end sub
function executestatement (strsql)
dim objcmd as new oledbcommand(strsql, conn)
try
objcmd.connection.open()
objcmd.executenonquery()
catch ex as exception
lblmessage.text = ex.message
end try
objcmd.connection.close()
end function
</script>
<html><body>
<asp:label id= "lblmessage" runat ="server" />
<form runat= "server">
<asp:datagrid id = "dgdata" runat ="server"
bordercolor = "black"
gridlines="vertical"
cellpadding ="4"
cellspacing="0"
width = "100%"
autogeneratecolumns = "False"
ondeletecommand = "dgdata_delete"
oneditcommand = "dgdata_edit"
oncancelcommand = "dgdata_cancel"
onupdatecommand = "dgdata_update"
onpageindexchanged= "dgdata_pageindexchanged"
font-names = "arial"
font-size="8pt"
showfooter = "true"
headerstyle-backcolor= "#cccc99"
footerstyle-backcolor= "#cccc99"
itemstyle-backcolor= "#ffffff"
alternatingitemstyle-backcolor="#cccccc">
<columns>
<asp:templatecolumn headertext="id">
<itemtemplate>
<asp:label id = "name" runat = "server"
text = '<%# container.dataitem("userid")%>' />
</itemtemplate>
</asp:templatecolumn>
<asp:boundcolumn headertext = "firstname"
datafield = "firstname" />
<asp:boundcolumn headertext = "lastname"
datafield = "lastname" />
<asp:boundcolumn headertext = "address"
datafield = "address" />
<asp:boundcolumn headertext = "city"
datafield = "city" />
<asp:boundcolumn headertext = "state"
datafield = "state" />
<asp:boundcolumn headertext ="zip"
datafield = "zip" />
<asp:boundcolumn headertext ="phone"
datafield = "phone" />
<asp:editcommandcolumn
edittext="Edit"
canceltext="cancel"
updatetext="update"
headertext = "edit"/>
<asp:buttoncolumn headertext = "delete?" text = "X"
commandname = "delete"
buttontype = "pushbutton" />
</columns>
</asp:datagrid><p>
<asp:panel id= "addpanel" runat = "server">
<table>
<tr>
<td width ="100" valign = "top">
first and last name:
</td>
<td width ="300" valign = "top">
<asp:textbox id= "tbfname" runat = "server"/>
<asp:textbox id= "tblname" runat = "server"/>
</td>
</tr>
<tr>
<td valign = "top">address:</td>
<td valign= "top">
<asp:textbox id= "tbaddress" runat = "server"/>
</td>
</tr>
<tr>
<td valign = "top">city, state, zip:</td>
<td valign= "top">
<asp:textbox id= "tbcity" runat = "server"/>
<asp:textbox id= "tbstate" runat = "server"/>
<asp:textbox id= "tbzip" runat = "server"
size=5 />
</td>
</tr>
<tr>
<td valign= "top">phone:</td>
<td valign= "top">
<asp:textbox id= "tbphone" runat = "server"
size = 11/><p>
</td>
</tr>
<tr>
<td colspan = "2" valign = "top" allign = "right">
<asp:button id = "btsubmit" runat ="server" text ="add"
onclick = "submit" />
</td>
</tr>
</table>
</asp:panel>
</form>
</body></html>
View 14 Replies
View Related
Apr 25, 2007
Hi AllI am updating a local table based on inner join between local tableand remote table.Update LocalTableSET Field1 = B.Field1FROM LinkedServer.dbname.dbo.RemoteTable BINNER JOIN LocalTable AON B.Field2 = A.Field2AND B.Field3 = A.Field3This query takes 18 minutes to run.I am hoping to speed up the process by writing in OPENQUERY syntax.ThanksRS
View 1 Replies
View Related
Dec 26, 2002
Hi Guys,
We have a database with 20 gig and with huge transactions. The transaction log backup is scheduled every one hour
from 3.00 AM to 9.00 PM.
We take a full backup in the disk at 9.00 PM and again a full backup in the tape at 2.00 AM
It works fine in the day from 6.00 AM and complete within seconds and the size is approx. 50 to 200 MB.
But the very first transaction log backup at 3.00 AM is running like 3 hrs and the size is approx. 11 gig whick is almost equivalent to the Full backup size. There are some dts packages that are running in the night and as usual reindex, intergrity checks are running and there no large user traffic during night. But I have no idea which the very first transaction log backup in the morning takes longer time and has this bug size. Is there any work around to fix this proble.
Please advise.
Thanks,
Anu
View 7 Replies
View Related
Apr 14, 2015
Is there anywhere in the SSMS to see the start time of a currently running job, currently running it's first step, without needing to run a query?
If not, why would Microsoft decide to not show it in the job activity monitor?
SSMS = Sql Server Management Studio
View 1 Replies
View Related