SAP - SQL SERVER Import && Export Wizard Error

Nov 12, 2007

I am trying to import data from SAP through SQL SERVER Import & Export Wizard.... but its throughing following Error:
Copying to [LATPRO].[dbo].[RESB] (Error)

I went through couple of sites, as well as SQL help file and as asked increased my virtual memory still i am getting same error, does anyone know anything regarding aforesaid problem??





MessagesInformation 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Error 0xc02090f5: Data Flow Task: The component "Source - Query" (1) was unable to process the data.
(SQL Server Import and Export Wizard)


Error 0xc0047038: Data Flow Task: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Source - Query" (1) returned error code 0xC02090F5. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)


Error 0xc0047021: Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
(SQL Server Import and Export Wizard)


Error 0xc0047039: Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
(SQL Server Import and Export Wizard)


Error 0xc0047021: Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
(SQL Server Import and Export Wizard)

View 6 Replies


ADVERTISEMENT

Error Trying To Import MS Access 2003 Database Via SQL Server Import And Export Wizard - Too Many Sessions Already Active

Nov 29, 2006

I am trying to simplify a query given to me by one of my collegues written using the query designer of Access. Looking at the query there seem to be some syntax differences, so to see if this was the case I thought I would import the database to my SQL Server Developer edition.

I tried to start the wizard from within SQL Server Management Studio Express as shown in one of the articles on MSDN which did not work, but the manual method also suggested did work.

Trouble is that it gets most of the way through the import until it spews forth the following error messages:

- Prepare for Execute (Error)
Messages
Error 0xc0202009: {332B4EB1-AF51-4FFF-A3C9-3AEE594FCB11}: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Could not start session. Too many sessions already active.".
(SQL Server Import and Export Wizard)

Error 0xc020801c: Data Flow Task: The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0202009.
(SQL Server Import and Export Wizard)

Error 0xc004701a: Data Flow Task: component "Source 33 - ATable" (2065) failed the pre-execute phase and returned error code 0xC020801C.
(SQL Server Import and Export Wizard).

There does not seem to be any method of specifying a number of sessions, so I don't see how to get round the problem.

Does anyone know how I can get the import to work?

View 2 Replies View Related

Error When Attempting To Use SQL Server Import And Export Wizard

Sep 18, 2006

I'm unable to use SSIS packages after installing SQL Server 2005. Specifically when I first loaded a new Integration Services project in SQL Server Business Intelligence Development Studio the default SSIS package could not load, I get Package.dtsx in my tabbed document view but in the body of this window is a error message: "Microsoft Visual Studio is unable to load this document. QI for IEnumVARIANT failed on the unmanaged server."

If I try to use the SQL Server Import and Export Wizard shortly after the window to select your data source I get a pop-up error message:



This wizard will close because it encountered the following error:

For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.42&EvtSrc=Microsoft.SqlServer.Management.UI.WizardFrameworkErrorSR&EvtID=UncaughtException&LinkId=20476

------------------------------
ADDITIONAL INFORMATION:

QI for IEnumVARIANT failed on the unmanaged server. (CustomMarshalers)



Anyone have any ideas on how I can resolve this?

View 1 Replies View Related

SQL Server Compact Edition Sdf As Data Source In SSIS Import And Export Wizard - Error

Jul 31, 2007



Should I be able to use a SQL Server Compact Edition sdf file as the data source for the SSIS Import and Export Wizard?

When I select the .net Framework Provider for compact Edition from the data source drop down, I get a message box with "An error occured which the SSIS Wizard was not prepared to handle. Exception has been thrown by the target of an invocation. (mscorlib) Specified method is not supported. (System.Data.SqlServerCe)"

We have a user with a sdf file that will no longer sync, so we wanted to get her data from sdf file tables into SQL Server tables quickly and easily. Since the SSIS wizard wouldn't work with the sdf data source, we copied SQL Server Mgmt Studio query results into an Excel spreadsheet via the Clipboard, them imported those records with SSIS. But we need a repeatable process in case this happens in the future.

We tried to reinitialize her merge replication subscription with SQL Server Mgmt studio, and with C# code, but none of that would work.

How many MS data provider options are available for SQL Server compact edition? I see ".Net Framework Data Provider for Microsoft SQL Server Compact Edition" in the SSIS data source drop down, but shouldn't I also see an OLE-DB Provider for SQL Server Compact Edition?

This is all on my XP workstation where I can successfully write C# code for SQL Server Compact data access with Assembly = System.Data.SqlServerCe = C:Program FilesMicrosoft Visual Studio 8Common7IDEPublicAssembliesSystem.Data.SqlServerCe.dll. So I think I have the proper tools installed.

Thanks.

View 1 Replies View Related

Importing Data From Oracle 8i/9i To SQL Server 2005 Using SQL Server Import And Export Wizard (AKA DTS Wizard)

Oct 20, 2006

Hi All,

I have become frustrated and I am not finding the answers I expect.

Here's the gist, we support both Oracle and SQL for our product and we would like to migrate our Clients who are willing/requesting to go from Oracle to SQL. Seems easy enough.

So, I create a Database in SQL 2005, right click and select "Import Data", Source is Microsoft OLE DB Provider for Oracle and I setup my connection. so far so good.

I create my Destination for SQL Native Client to the Database that I plan on importing into. Still good

Next, I select "Copy data from one or more tables or views". I move on to the next screen and select all of the Objects from a Schema. These are Tables that only relate to our application or in other words, nothing Oracle System wise.

When I get to the end it progresses to about 20% and then throws this error about 300 or so times:

Could not connect source component.
Warning 0x80202066: Source - AM_ALERTS [1]: Cannot retrieve the column code page info from the OLE DB provider. If the component supports the "DefaultCodePage" property, the code page from that property will be used. Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale ID will be used.

So, I'm thinking "Alright, we can search on this error and I'm sure there's an easy fix." I do some checking and indeed find out that there is a property setting called "AlwaysUseDefaultCodePage" in the OLEDB Data Source Properties. Great! I go back and look at the connection in the Import and .... there's nothing with that property!

Back to the drawing board. I Create a new SSIS package and figure out quickly that the AlwaysUseDefaultCodePage is in there. I can transfter information from the Oracle Source Table to the SQL Server 2005 Destination Table, but it appears to be a one to one thing. Programming this, if I get it to work at all, will take me about 150 hours or so.

This make perfect sense if all you are doing is copying a few columns or maybe one or two objects, but I am talking about 600 + objects with upwards of 2 million rows of data in each!!

This generates 2 questions:
1. If the Import Data Wizard cannot handle this operation on the fly, then why can't the AlwaysUseDefaultCodePage property be shown as part of the connection
2. How do I create and SSIS Package that will copy all of the data from Oracle to SQL Server? The source tables have been created and have the same Schema and Object Names as the Source. I don't want to create a Data Flow Task 600 times.

Help!!!

View 8 Replies View Related

Error When Using SQL Import / Export Wizard

Jul 5, 2006

I am attempting to import data from an access db using the wizard and I get the following error when the wizard attempts to save.


- Initializing Data Flow Task (Success)
- Initializing Connections (Success)
- Setting SQL Command (Success)
- Setting Source Connection (Success)
- Setting Destination Connection (Success)
- Validating (Success)
- Saving (Error)
Messages
* Error 0xc0208220: Data Flow Task: Unable to save to XML.
(SQL Server Import and Export Wizard)


Does anyone have any ideas about how to correct this?

View 1 Replies View Related

SQL Server Import And Export Wizard Fails To Import Data From A View To A Table

Feb 25, 2008

A view named "Viw_Labour_Cost_By_Service_Order_No" has been created and can be run successfully on the server.
I want to import the data which draws from the view to a table using SQL Server Import and Export Wizard.
However, when I run the wizard on the server, it gives me the following error message and stop on the step Setting Source Connection


Operation stopped...

- Initializing Data Flow Task (Success)

- Initializing Connections (Success)

- Setting SQL Command (Success)
- Setting Source Connection (Error)
Messages
Error 0xc020801c: Source - Viw_Labour_Cost_By_Service_Order_No [1]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0014019. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
(SQL Server Import and Export Wizard)

Exception from HRESULT: 0xC020801C (Microsoft.SqlServer.DTSPipelineWrap)


- Setting Destination Connection (Stopped)

- Validating (Stopped)

- Prepare for Execute (Stopped)

- Pre-execute (Stopped)

- Executing (Stopped)

- Copying to [NAV_CSG].[dbo].[Report_Labour_Cost_By_Service_Order_No] (Stopped)

- Post-execute (Stopped)

Does anyone encounter this problem before and know what is happening?

Thanks for kindly reply.

Best regards,
Calvin Lam

View 6 Replies View Related

Import Export Wizard - Syntax Error In Preview && Execution

Jan 3, 2008

Source: MS SQL Server 6.5
Destination: MS SQL Server 2005 (SP2 installed)
Suppl Ver Info: Microsoft.SqlServer.MaintenancePlanTasks.dll (ver 9.0.3043.0)


Desc:
When copying one table from source to destination (using import export wizard), the following error shows. However, when using query select * from tbl_1 can shows preview correctly. (but still need to save as SSIS, and change codepage property before it works)


===================================

The preview data could not be retrieved. (SQL Server Import and Export Wizard)

===================================

Line 1: Incorrect syntax near '['. (Microsoft OLE DB Provider for SQL Server)

------------------------------
Program Location:

at System.Data.OleDb.OleDbDataReader.ProcessResults(OleDbHResult hr)
at System.Data.OleDb.OleDbDataReader.NextResult()
at System.Data.OleDb.OleDbCommand.ExecuteReaderInternal(CommandBehavior behavior, String method)
at System.Data.OleDb.OleDbCommand.ExecuteReader(CommandBehavior behavior)
at System.Data.OleDb.OleDbCommand.System.Data.IDbCommand.ExecuteReader()
at Microsoft.SqlServer.Dts.DtsWizard.Preview.LoadPreview()

When executing the wizard, the following error shows (the table exists, of course)


===================================

Could not connect source component.

Error 0xc0202009: Source - tbl_1[1]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E37.


Error 0xc02020e8: Source - tbl_1[1]: Opening a rowset for "[db_1].[sch_1].[tbl_1]" failed. Check that the object exists in the database.
(SQL Server Import and Export Wizard)

===================================

Exception from HRESULT: 0xC02020E8 (Microsoft.SqlServer.DTSPipelineWrap)

------------------------------
Program Location:

at Microsoft.SqlServer.Dts.Pipeline.Wrapper.CManagedComponentWrapperClass.ReinitializeMetaData()
at Microsoft.SqlServer.Dts.DtsWizard.Execute.SetSourceConnection(Exception& ex, TransformInfo ti)




Exception from HRESULT: 0xC02020E8 (Microsoft.SqlServer.DTSPipelineWrap)


Could anybody please kindly help me on that?

View 2 Replies View Related

Import/Export Wizard In SQL Server 7.0

Aug 10, 2000

SQL Server 7.0 has an Import/Export Wizard for insert/outputs to delimitefd files.
I was wondering if someone could point me to an undelying SP or fuction which is being run and if it can be modified/customised, or any other alternative within SQL-Server.
TIA,
Mustafa

View 1 Replies View Related

MS SQL Server Import/export Wizard

Sep 22, 2005

Hi everyone,
Plese help me out. I import one database from one server to another. This process able to copy all the tables and functions but it copied only few stored procedures.

so tell me how to copy or import remaining stored procedures?

View 2 Replies View Related

What Is DTS Export/Import Wizard In SQL Server?

Apr 24, 2008

Can any one say,what is DTS Package?

DTS Export/Import wizard --What it does??

Help me!

View 3 Replies View Related

SQL Server Import And Export Wizard

Feb 13, 2008

I have imported spreadsheet and text files into SQL 2000 and I have never had this much trouble. Everything is just fine when I have a table that is all varchar(50). I have a table that has money, datetime, etc. Everytime I try to import this information it says that it cannot import because the column will be truncated. The column that first errors out is completely blank. The table column allows nulls. What is the issue? It is a money column and there isn't anything in there. Next the error message says that it is a datetime field ever after it has already run bast 5 datetime fields without a problem. The format is exactly the same. Is there a patch for this or am I doing something completely wrong? PLEASE HELP!

View 8 Replies View Related

SQL Tools :: Import Export Wizard Default Data Source Causing Error / Crash

Sep 1, 2015

I have several versions of SQL Server and have been using SQL 2008 on a regular basis due to this issue. Our SQL 2014 when I do the Import Data process, it opens up the dialog window, hit next, and the data source is currently defaulting to ".NET Framework Data Provider for IBM i" - when it does this it immediately errors out with:

"An error occurred which the SQL Server Integration Services Wizard was not prepared to handle.

Additional Information:
> Exception has been thrown by the target of an invocation (mscrolib)
>> Failed to find or load the registered .NET Framework Data Provider (System.Data)"

It immediately crashes/closes the Import/Export wizard with me unable to change the data source to what I need it to be.

My 2008 defaults to SQL Server Native Client 10.0 and does allow me to change to that same option (at which point it errors) but it does not close the wizard.

I need a way to either:

> Default the starting Data Source to be something else
> Fix whatever error is causing it to crash - I am at a loss as to what the error is looking for
> Not have the wizard crash whenever it defaults to this source.

Any of the above solutions would work fine - but at the moment I am unable to use the Import/Export wizard at all in SQL 2014.

View 3 Replies View Related

SQL Server Express Import And Export Wizard

Oct 21, 2007

Hi all,
Does any one can help me in finding SQL server express Import and Export wizard. I just installed sqlserver express, I went to tasks, right click and import/export is not there. How can I see it or loaded. Easy instruction please, I'm very new
Thanks

View 4 Replies View Related

Help Import Export Wizard SQL Server 2005

Jul 13, 2007

Hi! I have XP sp2, with SQL server 2005 Developer Edition 9.00.3054.00 and also have Microsoft SQL Server Express Edition 9.00.3042.00, well my problem alway I want import data into any server from any data source I recive this message:



TITLE: SQL Server Import and Export Wizard
------------------------------

The operation could not be completed.

------------------------------
ADDITIONAL INFORMATION:

Could not load file or assembly 'System.EnterpriseServices.Wrapper.dll' or one of its dependencies. The system cannot find the file specified. (System.EnterpriseServices)

------------------------------

Could not load file or assembly 'System.EnterpriseServices.Wrapper.dll' or one of its dependencies. The system cannot find the file specified.

------------------------------

The system cannot find the file specified. (Exception from HRESULT: 0x80070002)

------------------------------
BUTTONS:

OK
------------------------------




I have this name space but, I try for many ways and I can't import data in my server, What can I do???



Thanks a lot.

View 6 Replies View Related

SQL Server Managment Studio Express 2005 Import/Export Wizard

Nov 29, 2006

I've created a new database and restored the database from a backup. I'm wanting to import raw data from an excel spreadsheet into the tables of the new database.

When I right click on the database, and hover over tasks the import/ export data menu options are not in the menu.The menu items ends at 'Generate Scripts'.

I'm connected on a local instance to a registered server.

Can anyone advise?

View 9 Replies View Related

SQL Server 2008 :: Review Data Type Mapping (Import And Export Wizard)

Jun 5, 2015

Not seeing the Review Data Type Mapping Screen in SQL Server Import and Export Wizard?

Is there only a certain version where that screen shows up?

I am trying to import data from an MS Access application to SQL Server and all of the connections are good, but some of the data isn't and if I let it migrate using this tool it crashes on the bad data and there is no data that migrates. The Review Data Type Mapping screen will allow me to bypass the records in error and load the rest. however, I can;t do that if I cannot see the screen.

View 9 Replies View Related

Flat File Source Option Missing In The Sql Server Import && Export Wizard.

Jun 21, 2007

Hi All,

I want to import a txt file data to a sql server database table, to do this i used sql server import and export wizard. In this when we choose a Data Source, the option Flat file source is not coming up in the combo box in the wizard.



I am using sql server 2005, Management Studio to do this.



steps 1. right click on the database --> all tasks --> import data --> sql server import export wizard --> choose data source dialog box....



please help me.



thanks in advance.

View 1 Replies View Related

Import And Export Data Wizard Missing In SQL Server 2005 Express Edition

Feb 9, 2007

After some weeks evaluating tools and platforms for developing an application, I decided to move to SQL Server 2005 Express Edition. Everything was fine till last night, when after creating my tables, I needed to populate them. I tried to find the Import and Export Data Wizard that SQL Server 7.0 and 2000 used to have, but great was my surprise when I found -  in this forum - a post that said that it's not available in the Express Edition.

I'll have to move back in time (what I hate) to remember the way BCP worked. Can somebody post some examples to not start from zero ?  Does anybody know a third party visual tool that can import/export data from text files to a SQL Server DB via ODBC ?

What's the reason it was not included in the EE ?

THanks !

View 14 Replies View Related

Import And Export Wizard: Transferring Multiple Tables From SQL Server 2005 To SQL Server 2000

Jun 15, 2007

Hi!



I just used the SSIS Import and Export Wizard to copy 50+ tables from SS05 to SS2K.



I found that the wizard created a package that I could not figure out how to edit, e.g., to change whether or not it had to CREATE a table, or just use an existing one. (I created some problems by manually editing the receiving table names to be ones that already existed -- but the original names it had did not exist, so it knew it had to create them. What I should have done, and eventually ended up doing, was scroll through my list of tables in the "receiving" box; I just figured editing the name would be faster, not realizing what problems I would create for myself.)



Anyhow, now that I see the complex package that the wizard creates, with a LOOP over the 50+ tables, I would like to know how/where in the package it is storing the information about the tables to copy.



Basically the wizard creates the following Control Flow tab entries (in processing sequence order):

an Execute SQL Task: NonTransactableSql
an Execute SQL Task: START TRANSACTION
a Sequence Container: Transaction Scoping Sequence, which contains
an Execute SQL Task: AllowedToFailPrologueSql
an Execute SQL Task: PrologueSql
a Foreach Loop Container, which contains
a Transfer Task with an icon I did not notice in the Toolbox
an Execute Package Task: Execute Inner Package
an Execute SQL Task: EpilogueSql
an "on success" arrow to
an Execute SQL Task: COMMIT TRANSACTION
an Execute SQL Task: PostTransaction Sql
an "on failure" arrow to
an Execute SQL Task: ROLLBACK TRANSACTION
an Execute SQL Task: CompensatingSql

Where, and how, can I look within this package to see the details about the tables I am transferring? I see that one of the Connection Managers is "TableSchema.XML" -- but it points to a temporary file on my hard drive, that I presume is populated by the package. Where does it get its information?



This is certainly much more complex than the package I would have written, based on my limited knowledge of SSIS. I would have been inclined to create 50+ Data Flow tasks, one for each table.



So now I'm trying to understand why the Wizard created this more-complex package.



Any help will be appreciated, including references to non-Microsoft books/websites/etc.



Thanks in advance.



Dan

View 17 Replies View Related

SQL Server Import && Export Wizard(sql Server 2005)

May 27, 2008

table objects' indexes cant copy from source sql server db to target sql server.

pls advise how to enable indexes copying in SQL server Import & Export Wizard(sql server 2005).


regards
ym ho

View 7 Replies View Related

DTS-import/export Wizard

Oct 10, 2000

Can anyone tell me how I can use the DTS Wizard to import over 100 excel files from my hard drive, over to my server called(MARKETING_DB)and loop back through to grab the next excel file until all the files have been imported?

Thanks,

Mark

View 1 Replies View Related

DTS Import/Export Wizard

Oct 14, 2003

Hi guys

I'm trying to export a table from one ms sql database to another ms sql database. Unfortunately the following error occurs:

Error at Destination for Row number 2400. Errors encountered so far in this task: 1

Can somebody help me to solve this problem? Would be very nice!!

Best regards,
Lorenz

View 3 Replies View Related

DTS Import/Export Wizard

Jul 11, 2006

Hi,

I'm using the DTS Import/Export Wizard for the first time. Does anyone have a "canned" script I can run instead of going through the step by step wizard process. I have a number of tables I have to copy from a prod to test environment.

Thanks,
Jeff

View 2 Replies View Related

DTS Import/Export Wizard

Apr 19, 2007

What happens if my DTS fails half way through? (For example due to a network error).

I guess what I'm really asking is: does DTS Wizard operate within a transaction which upon failure is rolled back, and on success is committed?

Thanks,
Richard.

View 2 Replies View Related

Import Export Wizard

Dec 20, 2007



Import Export Wizard creates a new SSIS package to the file system. With the help of that wizard can I add the data flow task to an existing package.

Thanks

Sai

View 1 Replies View Related

Import Export Wizard

Jan 11, 2007

Hello,

I am having alot of problems with the import export wizard. I am trying to copy over around 315 tables to a new database. When the tables are copied over to the new database they are copied without any of the original constraints. Does anyone know why this could be happening? What I am trying to accomplish is a simple database transfer with the exception of about 10 to 15 tables from the original database. I do not understand why this is such a problem. I did not create a package, as this is going to be a one time shot.



Any help would be appreciated.

Thanks,

David

View 1 Replies View Related

Import Export Wizard

Jun 27, 2006

In sql2k i can select bunch of tables in EM and export to a different db also I can schedule this activity.

How to do the same in SQL2K5?

View 1 Replies View Related

Import/Export Export Wizard

Oct 5, 2007

I'm trying to export data from a SQL Server 2005 database to a DB2 database through SSIS. However, I keep getting an error that says "Could not retrieve table list" with Invalid Conversion. SQLSTATE=07006. Does anybody have any ideas or what the problem could be?
-Kyle

View 7 Replies View Related

SSIS Import/Export Wizard

Aug 7, 2007

I have Sql Server 2005 Developer Edition and Sql Server Management Studio.I'm trying to import data but there are no options available under "Projects" in SSMS.Do I need to download an update or anything to use this functionality?
Thanks

View 2 Replies View Related

Problem With Import/Export Wizard

Jan 18, 2007

I have read your articles and I got one question about the SQL Server Import and Export Wizard in MS SQL 2005.

It seems that in some cases, the Wizard do not copy ID’s even if I select the “Enable identity insert”

One of these cases is when I have already run a script to create the database schema before I start the wizard.



If I don’t run a script to create database schema before I start the wizard, then I will not get the keys transferred to the new database.



Do you know why this can happen and if this is meant to be a feature in the MS SQL 2005 or is Microsoft using another way to copy databases with identities and keys in this version?

View 3 Replies View Related

Import/Export Wizard Problems

Nov 15, 2007

I'm trying to export data from a SQL Server 2005 database to a DB2 database through SSIS. However, I keep getting an error that says "Could not retrieve table list" with Invalid Conversion. SQLSTATE=07006. Does anybody have any ideas or what the problem could be? The replies so far that I have gotten have been...
-Kyle

-------------------------------


Where exactly do you get this error?

Thanks,
Bob

--------------------------------

I am getting the error on the SELECT source tables and views screen.
-Kyle

--------------------------------


What type of provider are you using for your sql sql server connection manager?
Does a 'test connection' succeed?

--------------------------------



It loks like fetching of table metadata does not work for your provider. Is there a way you could try to see that metadata in some other tool after setting the same connection parameters (DSV wizard in BIDS perhaps). Try to double-check your schema related connection settings.

HTH,
Bob

--------------------------------


The test connection does succeed. The provider I am using is the IBM OLE DB Provider for DB2


--------------------------------


Can you try using MS OLE DB for DB2 to see if you get the same error? Also, is there a blob column in the source/destination table? If there is, try to move the data without the blob column and see if you get this error.


-------------------------------- (Does anybody know what this is? I can't seem to find the MS OLE DB for DB2)

There are no blobs

View 8 Replies View Related

Import Export Wizard - ODBC To SQL

Jan 25, 2006

Hi all,

we have recently purchased a server with sql 2005. One of the things we are looking to do is pull our entire informix database over onto the sql box. I have tried using the import/export wizard however when it comes to the copying I the option to copy all tables is greyed out. I have been able to do this sql to sql but not when i select the source as odbc and destination as sql.

I need to try and resolve this quite quickly and any advice/help would be appreciated. Please bear in mind that im relatively new to this stuff. I have had a look at other posts, and am getting the impression that this cannot be done simply. My initial understanding was that this could be done using the DTS in sql 2000 quite simply, but was also told that it should be even easier in 2005..

Well appreciate any help

Ian

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved