SCOPE_IDENTITY() Returning The ID Value Of An Inserted Record.
Jul 29, 2006
There are loads of postings on the net about this problem but none I have found explain the cause.
Whenever returning a value from a TableAdapter.Insert method followed by a SELECT SCOPE_IDENTITY() , the value returned is always 1. I have run the same select in SQL management studion and the correct value is returned but with a 1 showing in the column selector (just to the left of the first column. The column selector column is not data column. This must be the reason that issuing a SELECT after an INSERT does not work when using a TableAdapter isert method.
Has anyone come across the solution for this issue?
Thanks
View 6 Replies
ADVERTISEMENT
Oct 5, 2006
i recently found a little error in a stored procedure that was included in a project handed over to me....
the sp was rather simple. it just inserted a record into a table and returned the identity and the timestamp as follows
IF @@ERROR>0
BEGIN
SELECT @int_InterventionID = 0
RETURN @@ERROR
END
ELSE
BEGIN
SELECT @int_InterventionIDReturned = MAX(InterventionID) FROM tblIntervention
SELECT @ts_TimestampReturned = [Timestamp] FROM tblIntervention WHERE InterventionID = @int_InterventionIDReturned
SELECT @int_InterventionID = @int_InterventionIDReturned, @ts_Timestamp = @ts_TimestampReturned
RETURN 0
END
i figured that it should be using @@Identity for the interventionIdentity rather than max(InterventionID)
so i changed to...
IF @@ERROR>0
BEGIN
SELECT @int_InterventionID = 0
RETURN @@ERROR
END
ELSE
BEGIN
SELECT @int_InterventionIDReturned = @@IDENTITY
SELECT @ts_TimestampReturned = [Timestamp] FROM tblIntervention WHERE InterventionID = @int_InterventionIDReturned
SELECT @int_InterventionID = @int_InterventionIDReturned, @ts_Timestamp = @ts_TimestampReturned
RETURN 0
END
it returns the @int_InterventionIDReturned but the timestamp now comes back as null??? why??
how can i ensure that i always get the timestamp of the record it has just inserted
any help greatly appreciated,
Cheers,
Craig
View 3 Replies
View Related
Feb 25, 2006
Hi:
I've seen a lot of posts about returning the identity after an insert but for every variation, the return value or output parameter is null. Below is the sp, SQLDataSource and vb code for the return value attempt.
Here is the stored procedure:
ALTER PROCEDURE dbo.sp_InsertPlayer
(
@UserName varchar(64),
@Email varchar(128)
)
AS
INSERT INTO tblPlayer ([UserName], )
VALUES (@UserName, @Email)
RETURN SCOPE_IDENTITY()
If the sp is executed in the SQL Express that is included in VS 2005, the return value is the last autogenerated PlayerId.
SqlDataSource:
<asp:SqlDataSource ID="SqlDataPlayer" runat="server"
ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
SelectCommand ...
InsertCommand="sp_InsertPlayer"
InsertCommandType="StoredProcedure"
>
...
<InsertParameters>
<asp:Parameter Name="RETURN_VALUE" Direction="ReturnValue" Type="Int32" />
<asp:Parameter Name="UserName" Type="String" />
<asp:Parameter Name="Email" Type="String" />
</InsertParameters>
</asp:SqlDataSource>
code behind vb:
SqlDataPlayer.InsertParameters("UserName").DefaultValue = CreateUserWizard1.UserName
SqlDataPlayer.InsertParameters("Email").DefaultValue = CreateUserWizard1.Email
SqlDataPlayer.Insert()
Profile.PlayerId = SqlDataPlayer.InsertParameters("RETURN_VALUE").DefaultValue
The DefaultValue is Nothing.
Thanks for your help again.
arora
View 4 Replies
View Related
Jun 5, 2006
is there any way of getting the identity without using the "@@idemtity" in sql??? I'm trying to use the inserted event of ObjectDataSource, with Outputparameters, can anybody help me???
View 1 Replies
View Related
Oct 17, 2004
I am inserting a record by calling a stored procedure in my asp.net code. I need to return the identity field from the insert to use elsewhere in my code. I have found many things regarding this but nothing has worked.
Here is my code that works for the insert....
conClasf.Open()
strSQLInsert = "Exec spInsNewCAR '" _
& calDateInitiatedPopup.SelectedDate _
& "', '" & calResponseDatePopup.SelectedDate _
& "', '" & elbPartName.Selectedtext _
& "', '" & elbPartName.Item(elbPartName.SelectedValue).Text2 _
& "', '" & calSupplyDatePopup.SelectedDate _
& "', '" & elbMRBApproval3.Selectedtext _
& "'"
cmdAd = New OleDbCommand(strSQLInsert, conClasf)
cmdAd.ExecuteNonQuery( )
conClasf.Close
Here is the last part of my stored procedure. BTW, I have added Scope_Identity to the end of my sp and when I open my sp up, it is not there...not sure what that is about. I guess my main problem is what command do I use in ASP.net to execute the sp AND hold my returned value...
Thanks,
JOE
View 7 Replies
View Related
Dec 22, 2007
I've seen a lot of info on how to do this with @@IDENTITY and SCOPE_IDENTITY(), but can't get this to work in my situation.
I am inserting a record into a table. The first field is a GUID (UNIQUEIDENTIFIER) that uses newid() to generate a unique GUID. Since I am not using an int, I can't set the IsIdentity property of the field. Without IsIdentity set, @@IDENTITY and SCOPE_IDENTITY() do not work.
How can I get the ID (or whole record) of the last record that I inserted into a SQL database? Note that I am doing this in C#.
As a last resort, I could generatate the GUID myself before the insert, but I can't find C# code on how to to this.
View 10 Replies
View Related
Jul 20, 2005
Hello,I would like do an insert into a table. The table has an autoincrimenting unique int id. After I do the insert how do i get theunique int id of the record that I just inserted? Is there a straightforward way of accomplishing this?Thanks,Billy
View 6 Replies
View Related
Oct 1, 2007
Ok I know this might not be the most accurate place to post this but I know someone here has an answer for me on it.I need to get the product_ID of the new record that is created by this insert statement INSERTINTO products ( class_ID,category_ID,product_name,product_desc,product_image,product_dimension,product_o1,product_o2,product_o3,product_ac,product_ph,product_photo ) SELECT class_ID,category_ID,product_name,product_desc,product_image,product_dimension,product_o1,product_o2,product_o3,product_ac,product_ph,product_photo FROM productsWHERE product_ID = @productID
View 2 Replies
View Related
Nov 14, 2007
Hi EverybodyThis Code duplicate the record in the database, can somebody help me understand why that happen. Thanks a LOT CompanyName: <asp:textbox id="txtCompanyName" runat="server" /><br />Phone:<asp:textbox id="txtPhone" runat="server" /><br /><br /><asp:button id="btnSubmit" runat="server" text="Submit" onclick="btnSubmit_Click" /><asp:sqldatasource id="SqlDataSource1" runat="server" connectionstring="<%$ ConnectionStrings:dsn %>" insertcommand="INSERT INTO [items] ([smId], [iTitleSP]) VALUES (@CompanyName, @Phone)" selectcommand="SELECT * FROM [items]"> <insertparameters> <asp:controlparameter controlid="txtCompanyName" name="CompanyName" /> <asp:controlparameter controlid="txtPhone" name="Phone" /> </insertparameters></asp:sqldatasource> VBPartial Class Default2 Inherits System.Web.UI.Page Protected Sub btnSubmit_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnSubmit.Click SqlDataSource1.Insert() End SubEnd Class ----------------------------------------------Yes is an Identity the Primary Key of the Table items
View 2 Replies
View Related
Jan 18, 2005
I am using VS.net (2003) SQLcommand TEXT. with input params.
SQL server 2000
Can anyone tell me how to get the Identity value (field value, Idenity col) when you do an insert? I want to get the Identity value, then redirect the user to another page and use this identity value so they can update more (other) fields that are on that page.
My code so far that works... but Where do I put @@IDENTITY ?
How do I call or assign the @@IDENTITY value to a value in my aspx.vb code page?
Question: how do I get the Identity value from the ID column.
Question: How do I assign that value to some variable in code, say, assign it to (Session("App_ID")) = IdentityValueOrSomething?Help...
---------------------
INSERT INTO App
(AppName, Acronym, Description,bla bla bla bla........)
VALUES (@AppName, @Acronym, @Description, bla bla bla bla........)
-----------------------------
Private Sub btnAddApp_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnAddApp.Click
With cmdAddApp
'.Parameters("@app_id").Value = Session("App_ID")
.Parameters("@AppName").Value = txtAppName.Text
.Parameters( bla bla bla.............
.Parameters( bla bla bla.............
.Parameters( bla bla bla.............
End With
Try
cnAppKBdata.Open()
cmdAddApp.ExecuteNonQuery()
cnAppKBdata.Close()
''''''''''''''Session("App_ID") = whatever the @@IDENTITY is....'''''''''''''''''''''''''''??
Response.Redirect("AppUpdate.asp")
Catch ex As Exception
End Try
End Sub
Anyone have the lines of code that does this?
Any advise or examples :) thanks you.
View 1 Replies
View Related
Feb 21, 2006
I have a table named invoice that contains the following columns-invoiceno - Primary key and is set to autonumber-customerno-incoicedateand on my VB code i did the following InsertCommandSqlDataSource1.InsertCommand = "INSERT INTO invoice(customerno, invoicedate) VALUES('" & Session("UID") & "', GetDate()) "SqlDataSource1.Insert()My Question is how do i get the Primary Key Value it generated during the insert operation(invoice['incoiceno'])? Besides the creationg a stored procedere like the one in the MSDN Library
View 1 Replies
View Related
Apr 23, 2006
I would appreciate help with retriving the ID of the last record inserted. Have spent considerable time in forums and google but can't find anything that works for me.
Here is my VB Code
Dim queryString As String = "INSERT INTO [DUALML] ([UseriD], [Company]) VALUES (@UseriD, @Company)" Dim dbCommand As System.Data.IDbCommand = New System.Data.SqlClient.SqlCommand dbCommand.CommandText = queryString dbCommand.Connection = dbConnection
Dim dbParam_useriD As System.Data.IDataParameter = New System.Data.SqlClient.SqlParameter dbParam_useriD.ParameterName = "@UseriD" dbParam_useriD.Value = useriD dbParam_useriD.DbType = System.Data.DbType.Int32 dbCommand.Parameters.Add(dbParam_useriD) Dim dbParam_company As System.Data.IDataParameter = New System.Data.SqlClient.SqlParameter dbParam_company.ParameterName = "@Company" dbParam_company.Value = company dbParam_company.DbType = System.Data.DbType.[String] dbCommand.Parameters.Add(dbParam_company)
Dim rowsAffected As Integer = 0 dbConnection.Open Try rowsAffected = dbCommand.ExecuteNonQuery Finally dbConnection.Close End Try
Return rowsAffected End Function
View 4 Replies
View Related
Mar 5, 2001
Is it possible to retrieve the user name or host name of the user that inserted or updated a particular record? Is this information stored in the database's log file, in hidden fields, or anywhere else? I know I can easily add a user_name field and use triggers to add this information for new records, but I need this information for records already existing in the table. Thanks.
Jason
View 5 Replies
View Related
Dec 1, 2005
Hi All,
i have a database, and every time when any row enter , it capture the date and time of insertation,
then does any function or query available, which help to investigate me, today inserted record,yesterday inserted record,last 7 days inserted record,last 30 days inserted record and last year inserted record..
i am using asp.net and MS Access...
Any idea
thanx in advance...
sajjad
View 2 Replies
View Related
Feb 9, 2007
hi,i need to select last inserted record in my table,can any one show some example query for that please
View 6 Replies
View Related
Oct 29, 2006
Hi, I have 2 tables in my database PrescriptionHeader and PrescriptionDetails.My PrescriptionHeader table has the following fields:PrescriptionID -identity fieldPatientID PatientfNamePatientlname PrescriptionDetails table has the following fields:PrescriptionDetailID -identityPrescriptionID -from PrescriptionHeader table MedicineDosage The function InsertPrescription inserts values into the table PrescriptionHeader. I want the same function to then insert the value of MedicineDosage into PrescriptionDetails with the same PrescriptionID inserted into PrescriptionHeader. How do I tell the function to insert the PrescriptionID that was automatically inserted into PrescriptionHeader also into table PrescriptionDetails . How do I return the identity before proceeding to insert into PrescriptionDetails table?ThanksFunction InsertPrescription(ByVal PatientID As String, _ByVal PatientFname As String, _ByVal Patientlname As String, ByVal MedicineDosage as String)Dim DBAdapter As SqlDataAdapterDim DBDataSet As DataSetDim SQLString As StringDim DBCommandBuilder As SqlCommandBuilderSQLString = "SELECT * FROM PrescriptionHeader WHERE PrescriptionId = ''"DBAdapter = New SqlDataAdapter(SQLString, DBConnection)DBDataSet = New DataSetDBAdapter.Fill(DBDataSet)Dim AddedRow As DataRow = DBDataSet.Tables(0).NewRow()AddedRow("PatientID") = PatientIDAddedRow("PatientfName") = PatientFnameAddedRow("Patientlname") = PatientlnameDBDataSet.Tables(0).Rows.Add(AddedRow)DBCommandBuilder = New SqlCommandBuilder(DBAdapter)DBAdapter.Update(DBDataSet) End Function
View 1 Replies
View Related
May 22, 2007
Hiwhen inserting records into a table one of the fields is a date field. I am using the GETDATE() function to insert the date as the record is being inserted.when i retrieve an entire record from the table i want to be able to select this date, but also to get the number of days it has been since that record was inserted.eg: 3 daysif the record was inserted less than one day ago (<24 hrs ago) i would like it to return the number of hours. e.g. 22 hrsi dont want hours to be displayed if the days is >= 1.please can anyone guide me with this?thanks!
View 7 Replies
View Related
Jul 5, 2007
1 Protected Sub btnSubmit_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnSubmit.Click
2 Dim sqlStr As String
3 Dim sqlStr2 As String
4 Dim myConnection As MySqlConnection = Nothing
5 Dim myCommand As MySqlCommand = Nothing
6 Dim myConnection2 As MySqlConnection = Nothing
7 Dim myCommand2 As MySqlCommand = Nothing
8 Dim myReader As MySqlDataReader = Nothing
9 Dim IC As String
10
11 IC = txtIC1.Text + "-" + txtIC2.Text + "-" + txtIC3.Text
12
13
14 Try
15 sqlStr2 = "SELECT * FROM User WHERE uLogin='" & txtUserName.Text.Trim() & "'"
16
17 ' Connection
18 myConnection2 = New MySqlConnection(ConfigurationManager.ConnectionStrings("dbConnection").ToString())
19 myConnection2.Open()
20 ' Command
21 myCommand2 = New MySqlCommand(sqlStr2, myConnection2)
22 ' Reader
23 myReader = myCommand2.ExecuteReader()
24 Catch ex As Exception
25 ' Exception Error Here
26 Response.Write(Err.Number & " - " & Err.Description)
27
28 End Try
29 ' Checking
30 If myReader.Read() Then
31
32
33 Label2.Text = "Username already exist. Please choose another username"
34 Label3.Text = "*"
35
36 Else
37
38 Try
39
40
41 sqlStr = "INSERT INTO userapplication(uaName,uaIC,) VALUE (?uName,?uIC )"
42
43
44
45 ' Connection
46 myConnection = New MySqlConnection(ConfigurationManager.ConnectionStrings("dbConnection").ToString())
47 myConnection.Open()
48 'Command
49 myCommand = New MySqlCommand(sqlStr, myConnection)
50
51 myCommand.Parameters.AddWithValue("?uName", txtName.Text)
52 myCommand.Parameters.AddWithValue("?uIC", IC)
53
54
55 myCommand.ExecuteNonQuery()
56 myConnection.Close()
57 Response.Redirect("Register.aspx", False)
58
59 Catch ex As Exception
60 ' Exception Error Here
61 Response.Write(Err.Number & " - " & Err.Description)
62 Finally
63 ' Clean Up
64 If Not IsNothing(myCommand) Then
65 myCommand.Dispose()
66 End If
67 '
68 If Not IsNothing(myConnection) Then
69 If myConnection.State = Data.ConnectionState.Open Then myConnection.Close()
70 myConnection.Dispose()
71 End If
72 End Try
73
74
75 End If
76
77 End Sub
78
79
above is my code for the user registration page.the code that i bold,which with number 55,56 and 57,are where the problem occur.
when it run,it run 55, then 57,then back to 55, then 57 again
means that my db hav duplicate record being insert
anyone know how to solve this problem?
View 2 Replies
View Related
Nov 22, 2007
Hi
I have an application which get any change from database using sql dependency. When a record is inserted or updated it will fire an event and my application get that event and perform required operation.
On the event handler I am usin select ID,Name from my [table];
this will return all record from database.
I just want to get the record which is inserted or updated.
Can u help me in that.
Take care
Bye
View 4 Replies
View Related
Jan 30, 2008
Ok I've been researching this for a day now and I'm not coming up with much. I want to store the auto-incrementing ID of the last inserted record in a session variable, so that I may put it in a foreign key column in another table, if the user wishes to fill out a form on another page. I think my stored procedure is correct. But don't know what code to add to my aspx page. Any help will be greatly appreciated.
Here is my VB ScriptProtected Sub submitButton_Click(ByVal sender As Object, ByVal e As System.EventArgs)
Dim personalContactDataSource As New SqlDataSource()personalContactDataSource.ConnectionString = ConfigurationManager.ConnectionStrings("DataConnectionString1").ToString()
personalContactDataSource.InsertCommandType = SqlDataSourceCommandType.StoredProcedure
personalContactDataSource.InsertCommand = "PersonalContactInsert"
personalContactDataSource.InsertParameters.Add("FirstName", FirstName.Text)
personalContactDataSource.InsertParameters.Add("LastName", LastName.Text)personalContactDataSource.InsertParameters.Add("KeyPerson", KeyPerson.Checked)
personalContactDataSource.InsertParameters.Add("DayPhone", DayPhone.Text)personalContactDataSource.InsertParameters.Add("EveningPhone", EveningPhone.Text)
personalContactDataSource.InsertParameters.Add("Fax", Fax.Text)personalContactDataSource.InsertParameters.Add("Email", Email.Text)
personalContactDataSource.InsertParameters.Add("HomeAddress", HomeAddress.Text)personalContactDataSource.InsertParameters.Add("City", City.Text)
personalContactDataSource.InsertParameters.Add("State", State.Text)personalContactDataSource.InsertParameters.Add("Zip", Zip.Text)
personalContactDataSource.InsertParameters.Add("ReqEffectDate", ReqEffectDate.Text)personalContactDataSource.InsertParameters.Add("MRID", MRID.Text)
personalContactDataSource.InsertParameters.Add("CurrentPremium", CurrentPremium.Text)personalContactDataSource.InsertParameters.Add("CurrentCarrier", CurrentCarrier.Text)
personalContactDataSource.InsertParameters.Add("CurrentDeductible", CurrentDeductible.Text)personalContactDataSource.InsertParameters.Add("CurrentCoins", CurrentCoins.Text)personalContactDataSource.InsertParameters.Add("ReasonForQuote", ReasonForQuote.Text)
End Sub
And here is my Stored ProcALTER PROCEDURE dbo.PersonalContactInsert
@FirstName varchar(30),@LastName varchar(30),
@DayPhone varchar(14),@EveningPhone varchar(14),
@Fax varchar(14),@Email varchar(60),
@HomeAddress varchar(80),@City varchar(30),
@State char(2),@Zip char(5),
@KeyPerson bit,@ReqEffectDate smalldatetime,
@CurrentCarrier varchar(30),@CurrentPremium smallmoney,
@CurrentDeductible smallmoney,@CurrentCoins smallmoney,
@ReasonForQuote varchar(150),@MRID int,
@ClientNumber int OUT
AS
INSERT INTO PersonalContact(FirstName, LastName, DayPhone, EveningPhone, Fax, Email, HomeAddress, City, State, Zip, KeyPerson, ReqEffectDate, CurrentCarrier, CurrentPremium, CurrentDeductible, CurrentCoins, ReasonForQuote, MRID, DateTimeStamp)
VALUES(@FirstName,@LastName,@DayPhone,@EveningPhone,@Fax,@Email,@HomeAddress,@City,@State,@Zip,@KeyPerson,@ReqEffectDate,@CurrentCarrier,@CurrentPremium,@CurrentDeductible,@CurrentCoins,@ReasonForQuote,@MRID, GetDate())
SET @ClientNumber = SCOPE_IDENTITY()
RETURN
View 8 Replies
View Related
May 2, 2006
I am using this code to insert a record in my table where i have assigned a guid datatype field to generate an automatic guid for each record. but now i need to retrieve the guid to use it to send a confirmation email to the user.
SqlConnection sql_connection = new SqlConnection("Server=xxx.xxx.xx.xxx;uid=xxxxxxxx;password=xxxxxxx;database=xxxxxxx;");SqlCommand sql_command = new SqlCommand("INSERT INTO members (member_sex, member_cpr, member_nationality, member_block, member_gov, member_daaera, member_email, member_mobile, member_created_ip) Values (@member_sex, @member_cpr, @member_nationality, @member_block, @member_gov, @member_daaera, @member_email, @member_mobile, @member_created_ip)", sql_connection);
sql_command.Parameters.Add(new SqlParameter("@member_sex", Session["member_sex"].ToString()));sql_command.Parameters.Add(new SqlParameter("@member_cpr", Session["member_cpr"]));sql_command.Parameters.Add(new SqlParameter("@member_nationality", Session["member_nationality"].ToString()));sql_command.Parameters.Add(new SqlParameter("@member_block", Session["member_block"].ToString()));sql_command.Parameters.Add(new SqlParameter("@member_gov", "GOV"));sql_command.Parameters.Add(new SqlParameter("@member_daaera", 6));sql_command.Parameters.Add(new SqlParameter("@member_email", Session["member_email"].ToString().ToLower()));sql_command.Parameters.Add(new SqlParameter("@member_mobile", Session["member_mobile"].ToString()));sql_command.Parameters.Add(new SqlParameter("@member_created_ip", Request.UserHostAddress.ToString()));
sql_connection.Open();sql_command.ExecuteNonQuery();sql_connection.Close();
View 1 Replies
View Related
Aug 21, 2014
Best way to retrieve the identity key of the record just inserted?This question is for discussion purposes; the business process that spurred the question is currently working.Using SQL Server 2008 R2, a record is inserted from a stored procedure. Let's say the sp has something like this:
Code:
BEGIN
BEGIN TRANSACTION
INSERT INTO tblTools
([Desc],CreateDate,Model,CreatedBy,Notes)
[code]....
In Access, when you add a new record to the recordset, the identity field comes "pre-populated" making it east to get the actual, correct identity value assigned to the record you are inserting. In SQL Server, I know options include:
Code:
IDENT_CURRENT('tblX')
SCOPE_IDENTITY
@@IDENTITY
among other methods.
Each has pros and cons, such as user privileges (IDENT_CURRENT requires the user to have Select privileges on the table, and catches records created by other things, such as users and triggers), and the other two give you the last key inserted and don't allow specifying the object (which is a problem if the insert added records to multiple tables, or you have multiple inserts).
View 2 Replies
View Related
Jan 28, 2008
I am using ASP.NET 3.5 with SQLDataSource, when a record is inserted is there a way to retreive the newly created GUID value in a field?
I am currently using SELECT @NewID = SCOPE_IDENTITY() to retreive the newly created record unique ID field, but I need the secondary field GUID field's value instead in this case.
Thank you.
View 7 Replies
View Related
Feb 4, 2008
I'm calling the stored procedure below to insert a record but every record is inserted into my table twice. I can't figure out why. I'm using Sql Server 2000. Thanks.CREATE PROCEDURE sp_AddUserLog(@Username varchar(100),@IP varchar(50))AS SET NOCOUNT ONINSERT INTO TUserLogs (Username, IP) VALUES (@Username, @IP)GO Sub AddUserLog(ByVal Username As String)
Dim SqlText As String
Dim cmd As SqlCommand
Dim strIPAddress As String
'Get the users IP address
strIPAddress = Request.UserHostAddress
Dim con As New SqlConnection(ConfigurationManager.ConnectionStrings("MyConnectionString").ConnectionString)
SqlText = "sp_AddUserLog"
cmd = New SqlCommand(SqlText)
cmd.CommandType = CommandType.StoredProcedure
cmd.Connection = con
cmd.Parameters.Add("@Username", SqlDbType.VarChar, 100).Value = Username
cmd.Parameters.Add("@IP", SqlDbType.VarChar, 100).Value = strIPAddress
Try
con.Open()
cmd.ExecuteNonQuery()
Finally
con.Close()
End Try
End Sub
View 7 Replies
View Related
Mar 21, 2008
Hi,
I was wondering if anyone could offer me some advice. I am currently using a stored procedure to insert records into a database. I want to be able to retrieve the ID (primar key) from the item that has just been inserted using the stored procedure. The ID I want to get back is Meter_ID
This is my stored procedure:ALTER PROCEDURE dbo.quote
(@Business_Name nvarchar(50),
@Business_Type nvarchar(50),@Contact_Title nchar(10),
@Contact_First_Name nvarchar(50),@Contact_Last_Name nvarchar(50),
@Address_Line_1 nvarchar(MAX),@Address_Line_2 nvarchar(MAX),
@City nvarchar(MAX),@Postcode nchar(7),
@Tel_No nchar(11),@E_mail_Address nvarchar(50),
@Distributor_ID int,@Profile_Class int,
@Meter_Time_Code int,@Line_Loss_Factor int,
@Unique_Identifier1 int,@Unique_Identifier2 int,
@Check_Digit int,@Tariff nchar(20),
@UnitRate1AnnualUsage nchar(10),@UnitRate2AnnualUsage nchar(10),
@UnitRate1SubTotal money,@UnitRate2SubTotal money,
@QuoteTotal money
)
ASINSERT INTO client_details (Business_Name, Business_Type, Contact_Title, Contact_First_Name, Contact_Last_Name, Address_Line_1, Address_Line_2, City, Postcode, Tel_No, email_Address)VALUES (@Business_Name, @Business_Type,@Contact_Title, @Contact_First_Name, @Contact_Last_Name, @Address_Line_1, @Address_Line_2, @City, @Postcode, @Tel_No, @E_mail_Address)
DECLARE @Client_ID INTSET @Client_ID = scope_identity()
INSERT INTO meter_quote (Client_ID, Tariff, Meter_Distributor_ID, Meter_Profile_Class, Meter_Time_Code, Meter_Line_Loss_Factor, Unique_Identifier1, Unique_Identifier2, Check_Digit, UnitRate1AnnualUsage, UnitRate2AnnualUsage, UnitRate1SubTotal, UnitRate2SubTotal, QuoteTotal)VALUES (@Client_ID, @Tariff, @Distributor_ID, @Profile_Class, @Meter_Time_Code, @Line_Loss_Factor, @Unique_Identifier1, @Unique_Identifier2, @Check_Digit, @UnitRate1AnnualUsage, @UnitRate2AnnualUsage, @UnitRate1SubTotal, @UnitRate2SubTotal, @QuoteTotal)
RETURN
And this is the code I have in my asp page:<asp:SqlDataSource ID="SqlDataSource3" runat="server"
ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
InsertCommand="quote" InsertCommandType="StoredProcedure">
<InsertParameters><asp:ControlParameter ControlID="TextBoxBusinessName" DefaultValue=""
Name="Business_Name" PropertyName="Text" Type="String" /><asp:ControlParameter ControlID="DropDownBusinessType" Name="Business_Type"
PropertyName="SelectedValue" Type="String" /><asp:ControlParameter ControlID="DropDownListTitle" Name="Contact_Title"
PropertyName="SelectedValue" Type="String" /><asp:ControlParameter ControlID="TextBoxFirstName" Name="Contact_First_Name"
PropertyName="Text" Type="String" /><asp:ControlParameter ControlID="TextBoxLastName" Name="Contact_Last_Name"
PropertyName="Text" Type="String" /><asp:ControlParameter ControlID="TextBoxAddressLine1" Name="Address_Line_1"
PropertyName="Text" Type="String" /><asp:ControlParameter ControlID="TextBoxAddressLine2" Name="Address_Line_2"
PropertyName="Text" Type="String" /><asp:ControlParameter ControlID="TextBoxAddressLine3" Name="City"
PropertyName="Text" Type="String" /><asp:ControlParameter ControlID="TextBoxPostcode" Name="Postcode"
PropertyName="Text" Type="String" /><asp:ControlParameter ControlID="TextBoxTelNo" Name="Tel_No"
PropertyName="Text" Type="String" /><asp:ControlParameter ControlID="TextBoxEmail" Name="E_mail_Address"
PropertyName="Text" Type="String" /><asp:ControlParameter ControlID="TextBoxDistributorID" Name="Distributor_ID"
PropertyName="Text" Type="String" /><asp:ControlParameter ControlID="TextBoxProfileClass" Name="Profile_Class"
PropertyName="Text" Type="String" /><asp:ControlParameter ControlID="TextBoxMeterTimeCode" Name="Meter_Time_Code"
PropertyName="Text" Type="String" /><asp:ControlParameter ControlID="TextBoxLineLossFactor" Name="Line_Loss_Factor"
PropertyName="Text" Type="String" /><asp:ControlParameter ControlID="TextBoxUniqueIdentifier1" Name="Unique_Identifier1"
PropertyName="Text" Type="String" /> <asp:ControlParameter ControlID="TextBoxUniqueIdentifier2" Name="Unique_Identifier2"
PropertyName="Text" Type="String" /><asp:ControlParameter ControlID="TextBoxCheckDigit" Name="Check_Digit"
PropertyName="Text" Type="String" /> <asp:ControlParameter ControlID="LabelTariff2" Name="Tariff"
PropertyName="Text" Type="String" /> <asp:ControlParameter ControlID="TextBoxUnitRate1Usage" Name="UnitRate1AnnualUsage"
PropertyName="Text" Type="String" /><asp:ControlParameter ControlID="LabelUnitRate2Usage" Name="UnitRate2AnnualUsage"
PropertyName="Text" Type="String" /><asp:ControlParameter ControlID="LabelUnitRate1Total" Name="UnitRate1SubTotal"
PropertyName="Text" Type="Decimal" /><asp:ControlParameter ControlID="LabelUnitRate2Total" Name="UnitRate2SubTotal"
PropertyName="Text" Type="Decimal" /><asp:ControlParameter ControlID="LabelQuoteTotal" Name="QuoteTotal"
PropertyName="Text" Type="Decimal" />
</InsertParameters>
</asp:SqlDataSource>
And the following in the C# code:
try
{
SqlDataSource3.Insert();//Insert quote details into the database using a stored procedure
}catch (Exception ex)
{LabelInsertException.Text = "Failed" + ex.Message;
}
Any help would be much appreciated
Thanks, Hayley
View 6 Replies
View Related
Apr 24, 2015
We are getting data feed from Oracle database in our project. Everyday we will need to track if any rows got inserted/updated/deleted in the source and get that update right into our data warehouse.
Currently we are taking a dump of the required table (as it is) to our staging DB and comparing it with previous day data to track the changes (column by column comparison). This approach is working currently but has performance bottleneck. There is no tracking column (eg. last modified date or time) in source that will give us any idea of what got changed. Also there is no identity key or primary key in the source data.
Is there a way in SQL Server to get that inserted/updated records only instead of comparing column by column to track the changes?
View 1 Replies
View Related
Jul 11, 2013
I want to check a record in my table which has time ins and time outs feilds. I want to check on insertionof any new record that a new record should not be inserted on same timings and before 45 mins of timein and after 45 mins of timeout. How do i do it sql query ?
View 1 Replies
View Related
Apr 24, 2015
How to generate insert script of last inserted record in SQL SERVER Table???.. I want use this code for log entry purpose..
View 1 Replies
View Related
Apr 22, 2008
Greetings all,
I am tring to capture the ID of a newly inserted record from a form to a label that I will reference in a reciept page. I intend to pass the rowid to retrieve record information on other pages.
The insert suceeds... I just need to capture the auto generated ID for the new row to a label on the page post onclick. Any thoughts?
Dim MySQL As String = "Insert into dropkick (name, status, payroll, unit, contactnumber, email, equipment, issue, timein) values (@name, @status, @payroll, @unit, @contactnumber, @email, @equipment, @issue, @timein)"Dim myConn As SqlConnection = New SqlConnection(SqlDataSource1.ConnectionString)
Dim Cmd As New SqlCommand(MySQL, myConn)Cmd.Parameters.Add(New SqlParameter("@payroll", txt_payroll.Text))
Cmd.Parameters.Add(New SqlParameter("@name", txt_name.Text))Cmd.Parameters.Add(New SqlParameter("@status", "W"))
Cmd.Parameters.Add(New SqlParameter("@unit", txt_dept.Text))Cmd.Parameters.Add(New SqlParameter("@contactnumber", txt_cell.Text))
Cmd.Parameters.Add(New SqlParameter("@email", txt_email.Text))Cmd.Parameters.Add(New SqlParameter("@equipment", txt_equipment.Text))
Cmd.Parameters.Add(New SqlParameter("@issue", txt_issue.Text))Cmd.Parameters.Add(New SqlParameter("@timein", lbl_datetime.Text))
myConn.Open()
Cmd.ExecuteNonQuery()
Label1.Visible = "true"
Page.DataBind()
myConn.Close()
Label1.Text = "Your data has been received!"
''LABEL TO BE POPULATED WITH ID OF NEW RECORD
lbl_id.Text = ID
View 8 Replies
View Related
Jan 17, 2006
I am using SQL Express database and where can I set the default value to my Data field to auto insert the current date-time value? I tried to find the setting but can't seem to find it. Any help is much appriciated. Thanks in advance.
View 5 Replies
View Related
Jul 18, 2007
Dear all,
I am using C# , asp.net and sql server 2005.
Let me explain the situation.
I have written procedure to insert data into the table and return last inserted value by @@identity variable. Now my question is how do I execute this process so that I can
Get last inserted variable values
Please help
thanks
View 3 Replies
View Related
Jan 14, 2015
My goal is to update the "PriorInsert" field with the "DateInserted" from the previously inserted record where the WorkOrder, MachineNo, and Operator are all in the same group.
While trying to get to the correct previous record, I wrote the query below.
P.S. The attached .txt file includes a create and insert tbl_tmp sampling.
select top 1
a.ID,
a.WorkOrder,
a.MachineNo,
a.Operator,
a.PriorInsert,
[code]...
View 2 Replies
View Related
Feb 11, 2004
Hi ,
Is there a way in SQL Server stored procedure to return multiple records/ more than one records....?
Thanks in Advance...
-Mohit.
View 1 Replies
View Related
