SELECT EXEC Statements In SQL
Jun 6, 2008
I am writing a stored procedure to select some information from two tables and I would also like to Execute a function using the userid information from the processing in the where clause of the Select statement. Is the syntax below possible?? If yes, could you please help me understand exactly what I may be doing wrong here.. If no, can you please help with better syntax. Thanks in advance
SELECT M.UserID, M.FullName, (EXEC calcPoints M.UserID) as 'UserPoints'
FROM MissionUsers M LEFT OUTER JOIN MissionUserInfo MU ON M.UserID = MU.UserID
WHERE M.EMAIL = @UserEmail
View 5 Replies
ADVERTISEMENT
Sep 17, 2004
Is the following T-SQL correct, in which I am trying to make sure that th effect of 3 stored procedures gets reversed in case of an error ? I know if in place of stored procedures I had action queries like 'ActionQry1', 'ActionQry2' and 'ActionQry3' then the transaction logic would work. But will it work even if exec(....) statements are there in the transaction ? Each stored procedure is made up of an action query.
begin tran
exec("storeprocedure1('2')")
if @@error=0
begin
exec("storeprocedure2")
if @@error=0
begin
exec("storeprocedure3(122)")
if @error=0
commit tran
else
rollback tran
end
else
rollback tran
end
else
rollback tran
View 1 Replies
View Related
Oct 31, 2007
I have two SQL Server 2000 (one is localhost, one is remote with VPN IP 192.168.5.4).
I can select * from [192.168.5.4].db.dbo.test but I can't exec [192.168.5.4].db..spAdd in localhost.
These select and sp is OK for 1 or 2 week without any problem,but it didn't work one day.
Can some one explain why?
View 5 Replies
View Related
Aug 5, 2004
Hi All...
if i had the following sp...
*******************************************************
create procedure my_insert (param1 int, param2 int, paramx int)
as
...
complicated insert routine
...
return
*******************************************************
and then i wanted to exec this sp in another procedure i would have
exec my_insert( 1_value, 2_value, 3_value )
My question is how could i exec this will the result set of a select.... something like this
exec my_insert (select 1_value, 2_value, 3_value from another_table).
I know i could have this in an insert result type statement ie...
insert into dest_table (select 1_value, 2_value, 3_value from another_table)
but my insert routine is quite complicated and carries out some other functions so I would like to call (exec) a sp rather than repeating the complication in the select statement
Many Thanks
Gary T
View 4 Replies
View Related
Jan 2, 2007
hi,
can somebody tell me how to call SP in another SP select statement..? i've seen ppl doing it something like this..
Select column1, coulumn2, (select EXEC SP_NAme), blabla
thanks in advance... :)
View 6 Replies
View Related
Jul 20, 2005
HiI have a dynamically constructed sql query that I want to execute, e.g.exec('select * from ' + @tablename)(1) Can I suppress the output somehow if this returns no values?(2) Can I use the result of this query in another query somehow? e.g.select(3) Can I control the size of the columns in the output somehowThanksF
View 3 Replies
View Related
Mar 11, 2008
Code:
exec('select RIGHT(00000 + CAST(dh.zipcode AS varchar(5)), 5) as zip, '+@fieldname +' as distance into #distance from sumplicity.dbo.t_distancetohospital dh')
This runs normally and returns the number of rows created. Yet when I do a 'select * from #distance' query, I get a message that #distance doesn't exist.
Where is it storing all of this and how do I access it?
View 1 Replies
View Related
Aug 17, 2006
I'd *like* to execute a sProc within another sProc, because this other one (let's call it dataProc) will provide me with results I need that are calculated based off execing other procs within that proc itself.
I'd like to use this data in a new sProc (we'll call it newProc), but I don't need NEARly all of the columns. The dataProc returns 1 row with 42 columns. I need about 4-5 of those for my newProc.
The dataProc does not have any output variables, and I do not want to change the signature, because several pages/apps use this existing dataProc.
My question:
Is there a way to INSERT INTO table EXEC dataProc
*Without* making a temp table that takes in every single column the dataProc puts out?
Any help is much appreciated.. thanks!
View 8 Replies
View Related
Jan 16, 2007
Hello, how can i merge together several select statements?
I have something like this:
CREATE PROCEDURE Forum_GetThreads @ID int,@AscDesc bitASBEGINSET NOCOUNT ON;SELECT * FROM forum_ansageSELECT * FROM forum_topics WHERE (status = 0) ORDER BY (created) DESCIF (@AscDesc = 0)BEGIN SELECT * FROM forum_topics WHERE (status > 0) ORDER BY (created) DESCENDELSEBEGIN SELECT * FROM forum_topics WHERE (status > 0) ORDER BY (created) ASCENDHere i want to merge them all together and return only one SELECT statement with all the data
View 5 Replies
View Related
May 12, 2008
Both of these work fine separately; How do I join these two Select Statements?
SELECT MPI.CREATE_DT,MPI.MPI_NBR, MPI.LAST_NM,MPI.FIRST_NM,
MPI_CURRENT_ADDR.ADDR_NBR, MPI_CURRENT_ADDR.ADDRESS_1, MPI_CURRENT_ADDR.ADDRESS_2,
MPI_CURRENT_ADDR.CITY,MPI_CURRENT_ADDR.STATE_CD,MPI_CURRENT_ADDR.ZIP_CD,MPI_CURRENT_ADDR.PHN_NBR,
MPI_PERSON.BIRTHDAY,MPI_PERSON.SEX
FROM MPI,MPI_CURRENT_ADDR,MPI_PERSON
WHERE (MPI.MPI_NBR=MPI_PERSON.MPI_NBR) AND (MPI.ADDR_NBR=MPI_CURRENT_ADDR.ADDR_NBR)
AND
MPI.CREATE_DT>=20070101
ORDER BY MPI.CREATE_DT
SELECT PATIENT.PAT_NBR,PATIENT.PHYS_NBR, PHYSICIAN.FIRST_NM,PHYSICIAN.LAST_NM,PHYSICIAN.DE_NBR, PHYSICIAN.SALUTATION_CD
FROM PATIENT, PHYSICIAN
WHERE PATIENT.PHYS_NBR=PHYSICIAN.PHYS_NBR
Thanks!
Lisa
View 1 Replies
View Related
Sep 13, 2007
I have a table that list Canadian provinces and American States it looks something like this:
ID | ProvState
Under ID 1-13 lists the Canadian provinces and everything over 13 lists the American states. I want to create 1 query that will list the Canadian provinces first in alphabetical order then the States in alphabetical order.
I have tried using UNION but it's not returning what I want and it does not allow me to use order by for the first statement.
SELECT * FROM SPProvince WHERE ID < 14 ORDER BY ProvState
UNION
SELECT * FROM SPProvince WHERE ID > 13 ORDER BY ProvState
Anyone have any suggestions to this problem?
View 4 Replies
View Related
May 13, 2008
Arnie and All others. Thanks for your help.
The previous case became lenghty and then just mixed up a lot.
To make it easy I have created two temp tables and wrote to test select statement .
You will notice that I tired two select statement but they are giving different set of result however the 2nd Select statement not giving the result as should be looking at the following requirement.
--Selected record must RaType='b'
-- PlanID='H321'
-- Gender='0'
--
--And not to include in select if any one of these meets:
-- Hosp='1' in other words it has to be 0
-- ESRD='1' or Rafctor Type in ('g','f') in other words ESRD should be 0 and rafctorType in ('h','i')
-- Dod is not null in other words Dod has to be null
--
--copy from here
GO
Create table #MyTable
( RowID int IDENTITY,
RD varchar(10),
RAType varchar(5),
History varchar(15)
)
INSERT INTO #MyTable VALUES ( '1', 'A', '1111' )
INSERT INTO #MyTable VALUES ( '2', 'S','2222' )
INSERT INTO #MyTable VALUES ( '3', 'D', '2345')
INSERT INTO #MyTable VALUES ( '4', 'I2','1234' )
INSERT INTO #MyTable VALUES ( '5', 'C','3333' )
INSERT INTO #MyTable VALUES ( '1', 'B','4444' )
INSERT INTO #MyTable VALUES ( '2', 'X','5555' )
INSERT INTO #MyTable VALUES ( '1', 'D' ,'66666')
GO
Go
Create Table #MYTable2
(
RowID int IDentity,
RD varchar(10),
RaType varchar(5),
History varchar(15),
PlanID varchar(6),
Hosp varchar(2),
ESRD varchar(2),
RafctorType varchar(3),
gender varchar(5),
dod varchar (5) NULL
)
INSERT INTO #MyTable2 VALUES ( '1', 'A', '1111', 'H321', '0','0', 'g', '0' ,NULL)
INSERT INTO #MyTable2 VALUES ( '2', 'b', '2222', 'H321', '0','0', 'e', '0',NULL )
INSERT INTO #MyTable2 VALUES ( '2', 'b', '3333', 'H321', '0','0', 'f', '0',NULL )
INSERT INTO #MyTable2 VALUES ( '2', 'b', '4444', 'H321', '0', '0','d', '0',NULL )
Go
Select #MYtable2.History from #MYTable2
INNER JOIN #mytable on #myTable2.History=#mytable.history
Where #MyTable2.RaType='b' And PlanID='H321' And Gender='0' And Hosp<>'1' And ESRD<>'1' AND RafctorType Not in ('g','f') AND Dod is NULL
Select #Mytable2.History from #MyTable2
INNER JOIN #mytable on #mytable2.History=#mytable.history
where #mytable2.Ratype='b' AND PlanID='H321' AND Gender='0' AND(Hosp<>'1') or ((ESRD<>'1') or (RafctorType Not in ('g','f')) OR DOD is NULL)
Go
drop table #Mytable2
Drop table #MYtable
View 5 Replies
View Related
Mar 27, 2004
DECLARE @X VARCHAR(10)
DECLARE @NUM_MEMBERS SMALLINT
SELECT @X = 'other_db'
@NUM_MEMBERS = EXEC ('USE ' +@X + '; SELECT COUNT(Member_Name) FROM Logins')
I get an error when I try to store the result in @NUM_MEMBERS. :/ I've been looking all over for the correct syntax. Can anyone help?
ERROR:
Server: Msg 170, Level 15, State 1, Line 6
Line 6: Incorrect syntax near '@NUM_MEMBERS'.
thx n adv
View 2 Replies
View Related
Aug 7, 2007
some one can tell if i can make a "where" clause inside the BCP , when i say : select * FROM tbl where flag=N , usually the where flag='N' works with the ' ' , but it gives no error when save the store procedure without it ' ' saves nicely the SP,
but
like this it saves well "SELECT * FROM tbl where flag=N" and
when i execute it, give a sql statement error "Error = [Microsoft][SQL Native Client][SQL Server]Invalid column name N."
i dont now , any help
PS: perhaps at the end of the BCP ---> -c -T , must have some more or less
View 5 Replies
View Related
Jul 26, 2006
Hi Everyone,
Can you please let me know what is wrong with the following code? I run the following code using path: http://localhost/jimmy/may_30th_2006/vcalendar_cs/sb_PAYMENTS_page.aspx?LoginID=admin
public void searchResultsWithClinic() { SqlConnection myConnection; string conString; conString = ConfigurationManager.AppSettings["calendarString"]; myConnection = new SqlConnection(conString);
String cmdStr1, cmdStr2, cmdStr3; cmdStr1 = "SELECT sb_clinic_name FROM sb_client_and_clinic WHERE sb_client_id = '" + Request.Params.Get("LoginID") + "'";
cmdStr2 = "SELECT sb_client_id FROM sb_client_and_clinic WHERE sb_clinic_name = '" + cmdStr1 + "'"; SqlDataAdapter myCommand = new SqlDataAdapter(cmdStr2, myConnection); DataSet DS = new DataSet(); myCommand.Fill(DS, "SearchPaymentResults");
repeaterSearchPaymentResults.DataSource = DS; repeaterSearchPaymentResults.DataBind(); myConnection.Close();
}
Incorrect syntax near 'admin'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near 'admin'.Source Error:
Line 90: SqlDataAdapter myCommand = new SqlDataAdapter(cmdStr2, myConnection);
Line 91: DataSet DS = new DataSet();
Line 92: myCommand.Fill(DS, "SearchPaymentResults");
Line 93:
Line 94: repeaterSearchPaymentResults.DataSource = DS;Source File: d:Inetpubwwwrootjimmymay_30th_2006vcalendar_cssb_SearchPaymentResults.ascx.cs Line: 92 ---------------------------------------------------------------------------------
Please note that the 'admin' in the error message comes from http://localhost/jimmy/may_30th_2006/vcalendar_cs/sb_PAYMENTS_page.aspx?LoginID=admin
thanks,May
View 7 Replies
View Related
Apr 2, 2007
I have a SP returning the following result The select statement for this is
Code:
SELECT dbo.TEST1.[OFFICE NAME], COUNT(dbo.TEST1.[ACCOUNT ID]) AS AccountCount
FROM dbo.Test2 INNER JOIN
dbo.test3 INNER JOIN
dbo.Test4 ON dbo.test3.[Accounting Code] = dbo.Test4.[Accounting Code] INNER JOIN
dbo.TEST1 ON dbo.Test4.[Office ID] = dbo.TEST1.[ACCOUNT ID] ON dbo.Test2.[Model ID] = dbo.test3.ID INNER JOIN
dbo.[Inquiry Details] ON dbo.Test2.InquiryID = dbo.[Inquiry Details].InquiryID
WHERE (dbo.Test2.InquiryDate BETWEEN CONVERT(DATETIME, @startDate, 102) AND CONVERT(DATETIME, @endDate, 102)) AND dbo.Test1.[Account ID] IN(SELECT [account id] FROM test5 WHERE [Contact ID] = @contactId)
GROUP BY dbo.TEST1.[OFFICE NAME]
ORDER BY COUNT(dbo.TEST1.[ACCOUNT ID]) DESC name id count case1 226 320 case2 219 288 case3 203 163 case4 223 90 case5 224 73 i have another select stnat which returns like this The select statement is
Code:
Select test1.[office name], count(test1.[office name]) From test1 inner join test4 on test1.[account id]=test4.[office id] inner join test3 on test4.[accounting Code]=test3.[accounting Code] Group by test1.[Office Name] order by count(test1.[office name]) DESCname count case6 10 case2 56 case4 66 case1 74 case3 88 case7 100 case5 177 How can i combine this select stament with the SP, so that, i get a fourth column with case1 226 320 74 case2 219 288 56 .......................... ........................... Hope i am not confusing you all Please help me, if someone knows how to combine this? Thanks
View 2 Replies
View Related
Feb 4, 2008
I only want to count the titleids that are on loan can I join these two statements or write the stored procedure a different way? I hope this makes sense.
select count(libraryrequest.titleid) as [Presently on Loan], libraryrequest.titleid, media.[description]as Media
from libraryrequestjoin titles on titles.titleid = libraryrequest.titleidjoin resources on resources.titleid = titles.titleidjoin media on media.mediaid = resources.mediaidgroup by libraryrequest.titleid , media.[description]
select distinct requestors.Requestorid, titles.title, resources.quantityowned,requestors.requestorEmail,Requestors.requestdate, fname, lname, phonenum,StreetAddress1, City, State, Zip, libraryrequest.shipdate,libraryrequest.duedate, libraryrequest.returndate
from Requestorsjoin Titles on titles.Titleid = requestors.Titleidjoin libraryRequest on LibraryRequest.requestorid = Requestors.requestoridjoin resources on resources.titleid = titles.titleid
View 5 Replies
View Related
Apr 23, 2008
how can take codes below and put them into one store procedure to supplie a gridview. also i will like to define the row name on the left like i did to the column on the top using the 'AS'
Code1....
SELECT
SUM(CASE WHEN Month = 'January' THEN 1 ELSE 0 END) AS January, SUM(CASE WHEN Month = 'February' THEN 1 ELSE 0 END) AS February,
SUM(CASE WHEN Month = 'March' THEN 1 ELSE 0 END) AS March, SUM(CASE WHEN Month = 'April' THEN 1 ELSE 0 END) AS April,
SUM(CASE WHEN Month = 'May' THEN 1 ELSE 0 END) AS May, SUM(CASE WHEN Month = 'June' THEN 1 ELSE 0 END) AS June,
SUM(CASE WHEN Month = 'July' THEN 1 ELSE 0 END) AS July, SUM(CASE WHEN Month = 'August' THEN 1 ELSE 0 END) AS August,
SUM(CASE WHEN Month = 'September' THEN 1 ELSE 0 END) AS September, SUM(CASE WHEN Month = 'October' THEN 1 ELSE 0 END) AS October,
SUM(CASE WHEN Month = 'November' THEN 1 ELSE 0 END) AS November, SUM(CASE WHEN Month = 'December' THEN 1 ELSE 0 END) AS December,
SUM(CASE WHEN site_descr = 'SITE1' THEN 1 ELSE 0 END) AS AllTotal
FROM dbo.V_results
WHERE (site_descr = 'SITE1')
Code2.....
SELECT
SUM(CASE WHEN Month = 'January' THEN 1 ELSE 0 END) AS January, SUM(CASE WHEN Month = 'February' THEN 1 ELSE 0 END) AS February,
SUM(CASE WHEN Month = 'March' THEN 1 ELSE 0 END) AS March, SUM(CASE WHEN Month = 'April' THEN 1 ELSE 0 END) AS April,
SUM(CASE WHEN Month = 'May' THEN 1 ELSE 0 END) AS May, SUM(CASE WHEN Month = 'June' THEN 1 ELSE 0 END) AS June,
SUM(CASE WHEN Month = 'July' THEN 1 ELSE 0 END) AS July, SUM(CASE WHEN Month = 'August' THEN 1 ELSE 0 END) AS August,
SUM(CASE WHEN Month = 'September' THEN 1 ELSE 0 END) AS September, SUM(CASE WHEN Month = 'October' THEN 1 ELSE 0 END) AS October,
SUM(CASE WHEN Month = 'November' THEN 1 ELSE 0 END) AS November, SUM(CASE WHEN Month = 'December' THEN 1 ELSE 0 END) AS December,
SUM(CASE WHEN site_descr = 'SITE2' THEN 1 ELSE 0 END) AS AllTotal
FROM dbo.V_results
WHERE (site_descr = 'SITE2')
thanks in advance
View 10 Replies
View Related
Apr 1, 2004
Hi,
newbie here.
Im trying to perform the following two select statements on the one table. I have been trying innerjoins etc but keep getting errors. The basis of what im trying to do is this.
SELECT column1
FROM table1
WHERE column2 = (select column2 from table1 where column3 = 14)
Any ideas greatly appreciated.
View 1 Replies
View Related
Dec 22, 2005
Hi guys and gals,
I am trying to create a select statement that will return an INT that I will later have to use in another select statement. I have the following code, however, I keep getting an error that says:
'Error116: Only one expression can be specified in the select list when the subquery is not introduced with EXISTS.'
My Code is below:
//Start of sql
CREATE PROCEDURE ADMIN_GetSingleUsers( @userID int) AS
DECLARE @userSQL intSET @userSQL = (SELECT User_ID, TITLE.TITLE AS TITLE, Cast(Users.Active as varchar(50)) as Active, Cast(Users.Approved as varchar(50)) as Approved, Users.Unit_ID As usersUnitID, * From TITLE, Users WHERE User_ID = @userID AND TITLE.TITLE_ID = Users.Title_ID )
Select Unit_ID, Parent_ID, Unit_Name from UNITS WHERE Unit_ID = @userSQL
//End of sql
Can you point to what I am doing wrong? Thanks in advance!
View 4 Replies
View Related
Mar 31, 2003
I am having problems using IF statements. In fact, I don't even know if it is possible to use "IF" in a SELECT statement. Here's my dilemma:
For each employee in my database, I have a numeric rating. I want to assign the rating to a category (green, yellow, red), based on the range the rating falls into.
My data currently looks like this:
EmpName Rating
employeeX 100
EmployeeY 85
EmployeeZ 25
After the magic of SQL, I want the data to end up looking like this (actually, my boss wants it like this):
EmpName Green Yellow Red
employeeX 100
EmployeeY 85
EmployeeZ 25
The numeric rating would be inserted into the appropriate column, based on these ranges:
95 to 100 = green
80 to 94 = yellow
< 80 = red
I thought I could use a CASE statement, but I just learned that I can't do comparisons (I'm obviously a beginner). And I can't figure out how to use an If statement (or IIF).
Can anyone help?
Thanks!
Colleen
View 2 Replies
View Related
Sep 5, 2006
Hi !
I have to divide and analyse a bigger table to get a smaller one. My target is to make this division in only one SQL-Statement.
My table looks like this:
Code:
ArtNo Code
16637 C
38827 A
16637 D
44883 C
44883 C
63853 H
24564 D
24564 A
(ArtNo is not the Primary Key)
My SQL-Statement should now find out how often every "code" belongs to a "ArtNo".
The result should be:
Code:
ArtNr A C D H
16637 1 1
38827 1
34343 1
44883 2
63853 1
24564 1 1
Does anyone have ANY Idea how I could realize this as easy as possible (without View etc.) ??
Regards
Gawan
View 1 Replies
View Related
Jan 28, 2005
I am not sure if this is possible, but I was wondering if I can combine 2 SELECT statements so as to aquire a percentage..
I could be overthinking this....I am fairly new to SQL writing.
Here is an example of the 2 SELECT statements that I am using:
Code:
SELECT COUNT([Overall Rating]) FROM S526960.HDPIMaster WHERE Location = 'HBUS' AND [Overall Rating] = 'Good'
Code:
SELECT COUNT([Overall Rating]) FROM S526960.HDPIMaster WHERE Location = 'HBUS'
Within my output I am than taking the the data from the 1st query and dividing it by the 2nd query to get a percentage.
I was hoping that I could accomplish the same action within one SQL statement.
Thank you for your consideration!
View 4 Replies
View Related
Jan 26, 2005
I need help nesting select statements. Here's what I'm trying to do:
select (select e.emp_name_lf as employee, e.emp_id
from employee e, install_payroll_detail ipd
where e.emp_id = ipd.emplno)
e.emp_name_lf as username
from employee e, install_payroll_master ipm
where e.emp_id = ipm.entered_by
I just want one row with both the employee and username, however I cannot get the syntax. Any help is greatly appreciated.
Thanks!
View 3 Replies
View Related
Aug 19, 2004
Hi All,
I want to find difference of two Select statement in SQL Server 2000. As in Oracle we have "MINUS". Do we have the same thing in SQL Server also.
Thanks with Regards.
-Mohit.
View 2 Replies
View Related
Apr 23, 2008
Hi ,
If any one could help me in Joining these two select statements:
How Can I have Order by and Having Clauses in my final select list ?
***********
SELECTMIN(DISTINCT x.ProductionDate) as ProductionDay,COUNT(DISTINCT v.Number) as Timelost
FROMmaster..spt_values AS v
INNER JOIN
(
SELECTDATEDIFF(MINUTE, '00:00:00', Convert(varchar(10),StartDate,108)) AS StartMinute,
DATEDIFF(MINUTE, '00:00:00', Convert(varchar(10),EndDate,108)) AS EndMinute,
Convert(varchar(10),StartDate,102) as ProductionDate
--,COUNT(AlarmMessage) As Occurances
FROM RPMS.dbo.List_PaintShopAlarms
WHERE --Convert(varchar(10),StartDate,102) = @vcProductionDay and
Convert(varchar(10),StartDate,102) = Convert(varchar(10),EndDate,102)
AND (AlarmMessage LIKE '7FM%' OR AlarmMessage LIKE 'CONV%' OR AlarmMessage LIKE 'EMG%' )
)
AS x ON x.StartMinute <= v.Number
AND x.EndMinute > v.Number
WHEREv.Type = 'p' AND Number < 1440
and (x.ProductionDate BETWEEN Convert(varchar(10),@dtProductionDayStart,102) AND Convert(varchar(10),@dtProductionDayEnd,102))
group by x.ProductionDate
order by x.ProductionDate asc
***********
and
***********
SELECT Convert(varchar(25),[StartDate],102)as ProductionDay
,COUNT(AlarmMessage) As Occurances
FROM [RPMS].[dbo].[List_PaintShopAlarms]
WHERE
([AlarmMessage] LIKE '7fm%' or [AlarmMessage] LIKE 'Conve%') AND
Convert(varchar(25),[StartDate],102) BETWEEN Convert(varchar(25),@dtStartDate,102) AND Convert(varchar(25),@dtEndDate,102)
and DATEPART(dw, [ProductionDay]) <> 1
GROUP BY Convert(varchar(25),[StartDate],102)
HAVING SUM([Duration]) < 86400
ORDER BY Convert(varchar(25),[StartDate],102) asc
*************
View 2 Replies
View Related
Dec 22, 2014
how can i join these 2 queries to produce 1 result
Query 1:
select R.Name, T.Branchid, t.TradingDate,t. TransactionDate,
convert(varchar,T.Tillid)+'-'+convert(varchar,t.Saleid) as DocketNumber,
t.SubTotal, t.SalesRepPercent, t.SalesRepComAmount as CommissionAmt
from TransactionHeader T
join SalesRep R on
R.SalesRepid = T.SalesRepid
where T.SalesRepid is not null
Query 2 :
select C.TradingName,C.AccountNo
From Sale S
Join ClMast c on
C.Clientid = s.CustomerAccountID
The result should be R.Name,T.Branchid, t.TradingDate,t. TransactionDate,DocketNumber,t.SubTotal, t.SalesRepPercent, t.SalesRepComAmount, TradingName,Accountno..Field Saleid is present in Transactionheader Table and Sale table
View 5 Replies
View Related
Aug 29, 2007
different Users are running select statements under their own login. they have readonly permission to the database. My goal is to track all those queries and send notification which tables were opened and which columns were displayed...Looks like I need trigger on select statement for the table...( Unfortunetely it doesn't exists)
I collect all those statements in trace file and in the night time I stop trace, move file data to table and then step by step try to massage sql queries using VB.net... Most of those queries are so complicated, have derived tables inside and it is really hard to parse these sql statements...
1.If anybody has an idea how to say: User B opened table tbl_A col_B twice per today...using different methodology rather then go through SQL.(Other words how to create an event on a table which will be fired in a case of request select any column of that table?)
2.If somebody know where we can take good parser which will help with this job?
Thanks
View 14 Replies
View Related
Jul 20, 2005
I tried this:IF Exists (Select 1 from TESTA..POP10100 where PONumber=@PONumber) and(Select 1 from TESTA..POP30300 where POPType<>2 andPOPRCTNM=@ReceiptNo)BEGINENDIt says Incorrect Syntax error? I tried to cover the whole thing withan extra parantheses. It wont work eitherWhat am i doing wrongThanks, Girish
View 2 Replies
View Related
Mar 5, 2008
Hi
I have a question.
I have to write a stored procedure.I have a search page having four fields.Giving any of the field should fetch the whole record and display in the gridview. My trouble starts here I have a button field in gridview1 . when i click on the button there should be another gridview which displays refunds of particular customer i.e from another table.There is only one common colum in the two tables. based on that colum value we have to fetch from second table.
now my question is :
how to capture the colum value of first select statement and give it as input to second select staement.
my code is here :
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[search]
(@val1 varchar(225),
@val2 varchar(50),
@val3 varchar(50),
@val4 varchar(50))
AS
BEGIN
Select*From customer where
((@val1 IS NULL) or (CNo = @val1)) AND
((@val2 IS NULL) or(LastName = @val2)) AND
((@val3 IS NULL) or(FirstName = @val3)) AND
((@val4 IS NULL) or(PhoneNumber = @val4))
Select * From refunds where CNo = @val1
END
here if i fill CNo text box in my search page its giving the value
but all the time user may not give CNo.He may search customers based firstname ,lastname etc.
so what should i do to capture CNo from first select statement and give it as input to second select statements
anyone help is appreciated.
ramya.
View 10 Replies
View Related
Sep 3, 2007
Hi,
I have a SP having three differnet select statements like,
IF @reporttype ='A'
SELECT Column1, column2
FROM table1
IF @reporttype = 'B'
SELECT Column3, column4
FROM table2
IF @reporttype = 'C'
SELECT column5, Column6
FROM table3
Now I need three different reports for all three reporttypes.
If i creating first report for @reporttype A, it is executing fine and giving me the Columns which i need.
But while creating reprots for reporttype B and C, I m getting columns column1 and column2 . Its not displaying Column3, Column4, Column5, Column6.
Can anybody help me with this?
View 1 Replies
View Related
Mar 26, 2008
I have two select statements on a single table as follows:
SELECT * FROM DOCUMENTS
WHERE FILEDATE LIKE '%1987'
SELECT DOCNUM, COUNT(*) AS TOTALS FROM DOCUMENTS
GROUP BY DOCNUM
HAVING (COUNT(*)>1)
I want to combine the them to provide a list of rows in the table that have duplicate "DocNum" but only within the subset of rows LIKE %1987. When I first looked into how this is done I was sure that you would use a subquery. I tried to combine them using the first one as the outer query and the COUNT as the subquery. However, this gave an error that the subquery was returning a value that did not match what the outer query was expecting. So my questions are: Do I really need a subquery in the first place since this is all within one table? And, if not, how can this be done?
Thanks!
DeBug
View 12 Replies
View Related
Sep 11, 2006
Hello everyone
I need to have a transaction with a select statement like so
trans = cn.beginTransaction
Insert into order table an order record
select unique order Id from order table
insert record 1 into orderdetails using the orderid
insert record 2 into orderdetails using the orderid
commit trans
I am of course experiencing record locking after my first insert. I cannot select records from the order table even though I need the inserted OrderId in order to insert into the orderitemst table.
I have tried switching the isolation level to readuncomitted on my transaction but sp_who2 still shows a block even with the readUncomitted Isolation level.
A foreign key on the orderitems table prevents me from inserting orderitems without a parent order id to prevent orphans. Is this a common transactional issue?
Any help is greatly appreciated.
View 1 Replies
View Related
