SELECT Statement Beyond My Control!
Aug 11, 2005
I have been struggling with a query for sometime now, so I though I would see if anyone could help me out.Here is what I am trying to accomplish: I have a reservation page that has a dropdown list control on it. I am trying to populate the dropdown list with the available areas that have not already been reserved for the day. I have two tables, one of them contains the list of all of the areas that can be reserved. The second table contains the current reservations.Please let me know if I have not explained myself well enough and i will try to do expound better.Here is what I have so far, but it seems to give me results for the entire table, not just that day in particular. SELECT tbl_Hunting_Area.Area, tbl_Hunting_Area.Area_ID, tbl_Blinds.Area_ID, tbl_Blinds._DateFROM tbl_Hunting_Area CROSS JOIN tbl_BlindsWHERE (tbl_Hunting_Area.Area_ID <> tbl_Blinds.Area_ID) AND tbl_Hunting_Area.Area_ID NOT IN (SELECT tbl_Blinds.Area_ID FROM tbl_Blinds AS tbl_Blinds_1 WHERE (tbl_Blinds._DATE = '8-11-2005'))Here are the results that I receive from this query:Goose Field #2 2 1 2005-08-09 00:00:00.000Goose Field #3 3 1 2005-08-09 00:00:00.000Goose Field #4 4 1 2005-08-09 00:00:00.000Pond #1 - Pit Blind 5 1 2005-08-09 00:00:00.000Pond #1 - Shore Blind 6 1 2005-08-09 00:00:00.000Pond #2 7 1 2005-08-09 00:00:00.000Goose Field #1 1 6 2005-08-09 00:00:00.000Goose Field #2 2 6 2005-08-09 00:00:00.000Goose Field #3 3 6 2005-08-09 00:00:00.000Goose Field #4 4 6 2005-08-09 00:00:00.000Pond #1 - Pit Blind 5 6 2005-08-09 00:00:00.000Pond #2 7 6 2005-08-09 00:00:00.000Goose Field #1 1 7 2005-08-11 00:00:00.000Goose Field #2 2 7 2005-08-11 00:00:00.000Goose Field #3 3 7 2005-08-11 00:00:00.000Goose Field #4 4 7 2005-08-11 00:00:00.000Pond #1 - Pit Blind 5 7 2005-08-11 00:00:00.000Pond #1 - Shore Blind 6 7 2005-08-11 00:00:00.000Goose Field #1 1 5 2005-08-11 00:00:00.000Goose Field #2 2 5 2005-08-11 00:00:00.000Goose Field #3 3 5 2005-08-11 00:00:00.000Goose Field #4 4 5 2005-08-11 00:00:00.000Pond #1 - Shore Blind 6 5 2005-08-11 00:00:00.000Pond #2 7 5 2005-08-11 00:00:00.000
View 8 Replies
ADVERTISEMENT
Sep 3, 2007
Hello... im having a problem with my query optimization....
I have a query that looks like this:
SELECT * FROM table1
WHERE location_id IN (SELECT location_id from location_table WHERE account_id = 998)
it produces my desired data but it takes 3 minutes to run the query... is there any way to make this faster?... thank you so much...
View 3 Replies
View Related
Apr 18, 2008
I've got an IF Statement with a mind of it's own.
Code associated with IF statement ALWAYS RUNS???
ALWAYS passing PostParentID = 0 into SP.
ALWAYS SKIPS Print Statement #2 in Messages Window.
Don€™t know if this is helpful€¦
--************* Insert Comment Summary Table Record ****************************
PRINT 'PRINT STATEMENT #1'
PRINT @PostParentID
IF (@PostParentID > 0) --AND (@CommentSummaryID = 0 OR LEN(@CommentSummaryID) = 0 OR @CommentSummaryID IS NULL)
PRINT 'PRINT STATEMENT #2'
PRINT @PostParentID
DECLARE @CommentCount int
SET @CommentCount = 1
DECLARE @LastUpdate DATETIME
SET @LastUpdate = GETDATE()
INSERT INTO [syl_CommentSummaries]
VALUES(
@PostID,
@CommentCount,
@LastUpdate)
SET @CommentSummaryID = (SELECT CommentSummaryID
FROM syl_CommentSummaries
WHERE PostID = @PostID)
SELECT @CommentSummaryID
UPDATE syl_Posts
SET CommentSummaryID = @CommentSummaryID
WHERE PostID = @PostID
Message Window Output:
PRINT STATEMENT #1
0
0
(1 row(s) affected)
(1 row(s) affected)
View 6 Replies
View Related
Apr 9, 2008
Greetings,
I have run into a problem while creating a simple UDF on SQL Server 2000.
Code Snippet
CREATE FUNCTION [dbo].[GetSectionNum] (@section varchar(4))
RETURNS varchar(2)
AS
BEGIN
DECLARE @sTemp varchar(2),@s char
DECLARE @count int
DECLARE @length int
set @length = LEN(@section)
set @count = 1
WHILE (@count <= @length)
BEGIN
SET @s = SUBSTRING(@section,@count,1)
IF(ISNUMERIC(@s))
BEGIN
SET @sTemp = @sTemp + @s
END
SET @count = @count + 1
END
IF(LEN(@sTemp) = 1)
BEGIN
SET @sTemp = '0' + @sTemp
END
RETURN @sTemp
ENDWhen I perform a syntax check I receive and error about "Error 156: incorrect syntax near keyword 'BEGIN'. I have narrowed the problem to the IF statement inside the While block. If I remove the IF statement the syntax check is successful. This is the first UDF I have written so I'm swimming in uncharted water. Thanks ahead of time for your help.
View 3 Replies
View Related
May 3, 2007
Hi,
I need to UPDATE the IP Address of a newly created user into a table (the value is currently set to default - " Not Available"), and I really dont know the syntax required to do this. So far I've derived all the variables needed using the following code:
protected void ContinueButton_Click(object sender, EventArgs e)
{
//Get the ip address and put it into the customer table - (the instance of this user now exists)
MembershipUser _membershipUser = Membership.GetUser();
Guid UserId = (Guid)_membershipUser.ProviderUserKey;<--------------------------------------------------------------I can see the UserId here if I pause the prog
SqlDataSource customerDataSource = new SqlDataSource();
customerDataSource.ConnectionString = ConfigurationManager.ConnectionStrings["ConnectionString"].ToString();
customerDataSource.UpdateParameters.Add("IPAddress", Request.UserHostAddress.ToString());<---------------------------------------I can see the IPAddress here
customerDataSource.UpdateCommandType = SqlDataSourceCommandType.Text;
what next
I've not got a clue as to what to write next. There is a try / catch statement after this using :
rowsAffected = customerDataSource.Update();
which remains at 0 no matter what I try.
Any help greatly appreciated.
View 15 Replies
View Related
Jul 28, 2007
Hi,
I really need some help trying to figure out why my gridview is not working when I create a custom sql statement. It "executes" the query, but gives me an error message when I "test the query". Here is the error message: "There was an error executing the query. Please check the syntax of the command and if present, the types and values of the parameters and ensure they are correct. Syntax error: Expecting '.', identifier or quoted identifier."
Here is my sql statement:
SELECT TBLPROJECTS.NAME, TBLPROJECTTYPES.NAME AS PROJECTTYPE, TBLPROJECTS.DESCRIPTION, TBLUSERS_1.LOGIN AS OWNERNAME, TBLUSERS.LOGIN AS MANAGERNAME, TBLPROJECTS.START_DATE, TBLPROJECTS.END_DATE, TBLAOI.NAME AS AREAOFINTEREST, TBLPROJECTS.MANPOWER, TBLUNITS.NAME AS MANPOWERUNITFROM TBLPROJECTS INNER JOIN TBLAOI ON TBLPROJECTS.AOI_ID = TBLAOI.ID INNER JOIN TBLPROJECTTYPES ON TBLPROJECTS.PROJECTTYPE_ID = TBLPROJECTTYPES.ID INNER JOIN TBLUNITS ON TBLPROJECTS.MANPOWERUNITS_ID = TBLUNITS.ID INNER JOIN TBLUSERS ON TBLPROJECTS.MANAGER_ID = TBLUSERS.ID INNER JOIN TBLUSERS TBLUSERS_1 ON TBLPROJECTS.OWNER_ID = TBLUSERS_1.ID
I have tested it on a new project and still it does not work, I cannot find any problem, please help!!!!!!!!!!!!!!!!!!!!!!!!
View 5 Replies
View Related
May 12, 2008
SelectCommand="SELECT [id], [ref_id], [ref_name] FROM [ref] where [delete_flag] = 'N' AND [flag_transmit] = 'N' AND [ref_name] = @ref_name ">
<asp:ControlParameter Name="ref_name" ControlId="SrchRefName" PropertyName="Text" ConvertEmptyStringToNull="false"/>
The gridview of all the records is displayed on the page by default. There is a lookup of SSN and Name and putting values in those fields should filter the records and display only the row containing entered Name.I have trouble with the SelectCommand. No gridview is displayed with the above command even if value is entered in the Lookup textBox (SrchRefName).But when I change the selectcommand to- (using OR) SelectCommand="SELECT [id], [ref_id], [ref_name] FROM [ref] where [delete_flag] = 'N' AND [flag_transmit] = 'N' OR [ref_name] = @ref_name "> <asp:ControlParameter Name="ref_name" ControlId="SrchRefName" PropertyName="Text" ConvertEmptyStringToNull="false"/> the default gridview is displayed with all the records even though a value is entered in the lookup text box. Please help.
View 2 Replies
View Related
Jul 20, 2005
Hi All !Is it possible to get rid of these dash symbols which are underliningthe column name when recordset is returned after query execution ?For example, using isql.exe:SELECT 'blah'goproduces the following results:----blahWhat I want to achieve is justblahI know that SET NOCOUNT ON switches the "X row affected" thing. Buthow about column headers ?Thanks for your time,Seeker
View 5 Replies
View Related
Aug 29, 2006
I am currently having this problem with gridview and detailview. When I drag either onto the page and set my select statement to pick from one table and then update that data through the gridview (lets say), the update works perfectly. My problem is that the table I am pulling data from is mainly foreign keys. So in order to hide the number values of the foreign keys, I select the string value columns from the tables that contain the primary keys. I then use INNER JOIN in my SELECT so that I only get the data that pertains to the user I am looking to list and edit. I run the "test query" and everything I need shows up as I want it. I then go back to the gridview and change the fields which are foreign keys to templates. When I edit the templates I bind the field that contains the string value of the given foreign key to the template. This works great, because now the user will see string representation instead of the ID numbers that coinside with the string value. So I run my webpage and everything show up as I want it to, all the data is correct and I get no errors. I then click edit (as I have checked the "enable editing" box) and the gridview changes to edit mode. I make my changes and then select "update." When the page refreshes, and the gridview returns, the data is not updated and the original data is shown. I am sorry for so much typing, but I want to be as clear as possible with what I am doing. The only thing I can see being the issue is that when I setup my SELECT and FROM to contain fields from multiple tables, the UPDATE then does not work. When I remove all of my JOIN's and go back to foreign keys and one table the update works again. Below is what I have for my SQL statements:------------------------------------------------------------------------------------------------------------------------------------- SELECT:SELECT People.FirstName, People.LastName, People.FullName, People.PropertyID, People.InviteTypeID, People.RSVP, People.Wheelchair, Property.[House/Day Hab], InviteType.InviteTypeName FROM (InviteType INNER JOIN (Property INNER JOIN People ON Property.PropertyID = People.PropertyID) ON InviteType.InviteTypeID = People.InviteTypeID) WHERE (People.PersonID = ?)UPDATE:UPDATE [People] SET [FirstName] = ?, [LastName] = ?, [FullName] = ?, [PropertyID] = ?, [InviteTypeID] = ?, [RSVP] = ?, [Wheelchair] = ? WHERE [PersonID] = ? ---------------------------------------------------------------------------------------------------------------------------------------The only fields I want to update are in [People]. My WHERE is based on a control that I use to select a person from a drop down list. If I run the test query for the update while setting up my data source the query will update the record in the database. It is when I try to make the update from the gridview that the data is not changed. If anything is not clear please let me know and I will clarify as much as I can. This is my first project using ASP and working with databases so I am completely learning as I go. I took some database courses in college but I have never interacted with them with a web based front end. Any help will be greatly appreciated.Thank you in advance for any time, help, and/or advice you can give.Brian
View 5 Replies
View Related
Jan 9, 2015
Ok I have a query "SELECT ColumnNames FROM tbl1" let's say the values returned are "age,sex,race".
Now I want to be able to create an "update" statement like "UPATE tbl2 SET Col2 = age + sex + race" dynamically and execute this UPDATE statement. So, if the next select statement returns "age, sex, race, gender" then the script should create "UPDATE tbl2 SET Col2 = age + sex + race + gender" and execute it.
View 4 Replies
View Related
Jul 20, 2005
hiI need to write a stored procedure that takes input parameters,andaccording to these parameters the retrieved fields in a selectstatement are chosen.what i need to know is how to make the fields of the select statementconditional,taking in consideration that it is more than one fieldaddedfor exampleSQLStmt="select"if param1 thenSQLStmt=SQLStmt+ field1end ifif param2 thenSQLStmt=SQLStmt+ field2end if
View 2 Replies
View Related
Oct 29, 2007
Hi guys,
I have the query below (running okay):
Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
FROM myTables
WHERE Conditions are true
ORDER BY Field01
The results are just as I need:
Field01 Field02
------------- ----------------------
192473 8461760
192474 22810
Because other reasons. I need to modify that query to:
Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
INTO AuxiliaryTable
FROM myTables
WHERE Conditions are true
ORDER BY Field01
SELECT DISTINCT [Field02] FROM AuxTable
The the results are:
Field02
----------------------
22810
8461760
And what I need is (without showing any other field):
Field02
----------------------
8461760
22810
Is there any good suggestion?
Thanks in advance for any help,
Aldo.
View 3 Replies
View Related
Jul 4, 2006
Hello friends,
I want to use select statement in a CASE inside procedure.
can I do it? of yes then how can i do it ?
following part of the procedure clears my requirement.
SELECT E.EmployeeID,
CASE E.EmployeeType
WHEN 1 THEN
select * from Tbl1
WHEN 2 THEN
select * from Tbl2
WHEN 3 THEN
select * from Tbl3
END
FROM EMPLOYEE E
can any one help me in this?
please give me a sample query.
Thanks and Regards,
Kiran Suthar
View 7 Replies
View Related
May 5, 2015
I am attempting to run update statements within a SELECT CASE statement.
Select case x.field
WHEN 'XXX' THEN
 UPDATE TABLE1
  SET TABLE1.FIELD2 = 1
 ELSE
  UPDATE TABLE2
  SET TABLE2.FIELD1 = 2
END
FROM OuterTable x
I get incorrect syntax near the keyword 'update'.
View 7 Replies
View Related
Feb 13, 2007
Hi All
I have a report which has a multi-value parameter. Problem is, it can contain up to 100 options.Is there a way to limit the number of options that is passed to the SQL statement?. EG list has 100 options, user selects 10 but only the first 4 selected options are passed to the SQL statement.
Many Thanks
Delli
View 4 Replies
View Related
May 18, 2008
SSIS Newbie Question:
I have a simple Control Flow setup that checks to see if a particular table exists. If the table does not exists, the table is created in an alternate path, if it does exist, the table is truncated before moving to a file import Data Flow that uses an OLE DB Destination to output the imported data.
My problem is, that I get OLE DB package errors if the table the OLE DB Destination Container references does not exist when I load the package.
How can I over come this issue? I need to be able to dynamically create the table in an earlier step, then use that table to import data into in a later step in the workflow.
Is there a switch I can use to turn off checking in the OLE DB Destination Container so that it will allow me to hook up the table creation step?
Seems like this would be a common task...
Steps:
1. Execute SQL Task to see if the required table exists
2. Use expresions to test a variable to check the results of step 1
3. If table exists, truncate the table and reload it from file in Data Flow using OLE DB Destination
4. If table does not exist, 1st create it, then follow the normal Data Flow
Can someone help me with this?
Signed: Clueless with a deadline approaching...
View 3 Replies
View Related
Oct 20, 2014
In the below code i want to use select statement for getting customer
address1,customeraddress2,customerphone,customercity,customerstate,customercountry,customerfirstname,customerlastname
from customer table.Rest of the things will be as it is in the following code.How do i do this?
INSERT INTO EMImportListing ("
sql += " CustId,Title,Description,JobCity,JobState,JobPostalCode,JobCountry,URL,Requirements, "
sql += " IsDraft,IsFeatured,IsApproved,"
sql += " Email,OrgName,customerAddress1,customerAddress2,customerCity,customerState,customerPostalCode,
[code]....
View 1 Replies
View Related
Aug 10, 2006
I have 3 tables, with this relation:
tblChats.WebsiteID = tblWebsite.ID
tblWebsite.AccountID = tblAccount.ID
I need to delete rows within tblChats where tblChats.StartTime - GETDATE() < 180 and where they are apart of @AccountID. I have this select statement that works fine, but I am having trouble converting it to a delete statement:
SELECT * FROM tblChats c
LEFT JOIN tblWebsites sites ON sites.ID = c.WebsiteID
LEFT JOIN tblAccounts accounts on accounts.ID = sites.AccountID
WHERE accounts.ID = 16 AND GETDATE() - c.StartTime > 180
View 1 Replies
View Related
Sep 17, 2007
Hey guys i have a stock table and a stock type table and what i would like to do is say for every different piece of stock find out how many are available The two tables are like thisstockIDconsumableIDstockAvailableconsumableIDconsumableName So i want to,Select every consumableName in my table and then group all the stock by the consumable ID with some form of total where stockavailable = 1I should then end up with a table like thisEpson T001 - Available 6Epson T002 - Available 0Epson T003 - Available 4If anyone can help me i would be very appreciative. If you want excact table names etc then i can put that here but for now i thought i would ask how you would do it and then give it a go myself.ThanksMatt
View 2 Replies
View Related
Aug 6, 2007
SELECT Top 10 Name, Contact AS DCC, DateAdded AS DateTimeFROM NameTaORDER BY DateAdded DESC
I'm trying to right a sql statement for a gridview, I want to see the last ten records added to the to the database. As you know each day someone could add one or two records, how can I write it show the last 10 records entered.
View 2 Replies
View Related
Jul 11, 2007
Hello
How can i say this I would like my if statement to say: if what the client types in Form1.Cust is = to the Select Statement which should be running off form1.Cust then show the Cust otherwise INVALID CUSTOMER NUMBER .here is my if statement.
<% If Request.Form("Form1.Cust") = Request.QueryString("RsCustNo") Then%> <%=Request.Params("Cust") %> <% Else %> <p>INVALID CUSTOMER NUMBER</p> <% End If%>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:RsCustNo %>"
ProviderName="<%$ ConnectionStrings:RsCustNo.ProviderName %>" SelectCommand="SELECT [CU_CUST_NUM] FROM [CUSTOMER] WHERE ([CU_CUST_NUM] = ?)">
<SelectParameters>
<asp:FormParameter FormField="Cust" Name="CU_CUST_NUM" Type="String" />
</SelectParameters>
</asp:SqlDataSource>any help would be appreciated
View 2 Replies
View Related
May 15, 2008
Hi,
I am a newbie to this site and hope someone can help....
I have a select statement which I would like to create an extra column and put an if statement in it.... Current syntax is:
if(TL_flag= '1', "yes") as [Trial Leave]
it is coming up with an error.... I can use Select case but I should not need to as this should work?
Any ideas?
View 2 Replies
View Related
Jan 27, 2008
Hi All,
I am placing a Matrix inside the table control for grouping requirements,but when we export the report to the Excel, the contents inside the table cell are ignored. Is there any way to get the full report exported, as per the Requirement.Please help me with this issue.
With Thanks
M.Mahendra
View 5 Replies
View Related
Jan 12, 2006
I'm currently setting variables at the package level with an ExecuteSQL task. This works fine. However, I'm now starting to think about restartability midway through a package. It would be nice to have the variable(s) needed in a data flow set within the data flow so that I only have to restart that task.
Is there a way to do that using an SQL statement as the source of the value in a data flow?
OR, when using checkpoints will it save variable settings so that they are available when the package is restarted? This would make my issue a moot point.
View 2 Replies
View Related
Apr 21, 1999
I would like to exec a select statement in VB/C++ to return first 100 records? What is the SQL statement should be?
Thanks,
Sam
View 1 Replies
View Related
Aug 23, 2013
I am using three tables in this query, one is events_detail, one is events_summary, the third if gifts. The original select statement counted the number of ids (event_details.id_number) that appear per event_name (event_summary.event_name).
Now, I would like to add in another column that counts the number of IDs that gave a gift who attended an event that were also listed in the event_ details table. So far I have come up with the following. My main issue is linking the subquery properly back to the main query. how to count in the sub-query and have the result placed within the groups results in the main query.
SELECT es.event_name, es.event_id, COUNT(ed.id_number) Number_Attendees,
(
SELECT COUNT(gifts.donor_id) AS Count2
FROM gifts
WHERE gifts.donor_id = ed.id_number
) subquery2
[code]....
View 1 Replies
View Related
Oct 25, 2007
does any one have and example of how to embedd a flash swf file onto a report.??? Is it possable? any examples would be helpful.
View 1 Replies
View Related
Jul 31, 2014
I need to write a select statement that take the upper table and select the lower table.
View 3 Replies
View Related
Sep 7, 2006
Hi All,
Can some one point me in the right direction in how to construct my SQL query within my cursor?
I Have got a cursor which i am using to iterate through a table, What i am trying to do is in my statement(used to open the cursor) is compare 2 tables (the one which my cursor is iterating) to see if there is a matching row in the other table (using both tables ID's Like So:
SELECT column_List
FROM Table1
WHERE Table1_id = Table2_id
so for each row my cursor checks if there is a corresponding match in table2... but i would like to write to an error log
and do other statements if there is no match
how do i add this condition to my statement either using an if...else statement proceeding to the next row?
here is the statment i attempted to write:
SELECT column_List
FROM table1
WHERE
Table1_id = Table2.id
now i want to incoporate the statements below into the statement above as a condition when table1.id <> table2.id
IF table1.id <> table2.id
BEGIN
SET @DebugMessage = 'data not live.'
RAISERROR (@DebugMessage, 16, 1) WITH LOG
END
essentially what i am trying to sayin my statement is:
go to the first row
check if it has a match in table 2,
if there is no match execute a number of statements such as error loging e.t.c
go to the next row
repeat the previous statements
...i also looked through some Case...When statements am just not sure how to put in the condition
thanks in advance
View 1 Replies
View Related
Jul 5, 2006
I am a newbie to SQL. I have a table (AenComponent) with three columns (State1, State2, State3). Each column has a set of numeric values. I would like to get a number count from all of the rows that contain the value of 1, no matter which column they are in.
I have tried
SELECT COUNT(*) AS Expr1FROM AenComponentWHERE (State1 = 1) OR (State2 = 1) OR (State3 = 1)
but it does not give me an accurate count. Any help would be appreciated.
thanks
rusty
View 4 Replies
View Related
Dec 29, 2006
I'm trying to get a list of clients and their sum of total pmts, their pmt level, and pmt level description by date range.
Here is what I’ve tried and it will not work. I need to do this without using temp tables.
SELECT C.ClientID, SUM(P.AmountPaid) AS SumOfpmts, tblpmtLevels.pmtLevel, tblpmtLevels.DescriptionFROM tblPmts AS PL INNER JOIN tblPmtReceipts AS P ON PL.PmtID = P.PmtID INNER JOIN tblClients AS C ON PL.ClientID = C.ClientID INNER JOIN tblPmtLevels ON SUM(P.AmountPaid) >= tblPmtLevels.PmtLevelLow AND SUM(P.AmountPaid) <= tblPmtLevels.PmtLevelHighWHERE (P.PaymentDate BETWEEN @Start AND @End)GROUP BY C.ClientID
Please provide any help you can,
View 4 Replies
View Related
Mar 13, 2007
Hello, Is there a SQL SELECT Statement that can remove the time part in my DataTable. see example below
This is what I have in the first column 0 - MM/dd/yyyy 12:00:00 AM
This is what I want - MM/dd/yyyy
I would rather do it in the SELECT statement instead of doing it in my DataTable using the FORMAT function.
Thanks
Steve
View 5 Replies
View Related
Apr 18, 2007
I have a stored procedure that works like this
getCountryByIPAddress @ipaddr='1.2.3.4'
returns a single 2 char column.
I want to use it in a select statement similar to:
select customername, @country=(exec getCountry @ipaddr=customer.customeripaddress) from customer
I'm intend to receive a list of customer names and the 2 char result of GetCountry based on the customeripaddress field of the customer table. What I get is a syntax error near Exec and then another one near '.'
Is there another way to accomplish this that I am not seeing?
Ryan
View 6 Replies
View Related
