have a table with students details in it, i want to select all the students who joined a class on a particular day and then i need another query to select all students who joined classes over the course of date range eg 03/12/2003 to 12/12/2003.
i have tried with the following query, i need help putting my queries together select * from tblstudents where classID='1' and studentstartdate between ('03/12/2004') and ('03/12/2004')
when i run this query i get this message
Server: Msg 242, Level 16, State 3, Line 1 The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
the studentstartdate field is set as datetime 8 and the date looks like this in the table 03/12/2004 03:12:15
I have a sqlDataSource control that has its select command and parameters set dynamically. One of the parameters is a date, which should be in smalldatetime format (ie, 12/22/2006). Obviously, using SQL Server, the data is stored with both date and time. The problem is, I cannot get any data selected. I initially thought that I needed to tell it to only look at the date and not the time, but from what I have seen this should work. Here is the pertinent code. dim seldate as datetime selDate = Session("ChosenDate") Dim SelCmd As String = "SELECT [PatientName], [AssignedTo], [CPT], [CPT2], [HospitalID], [RoomNbr], [ACType], [TxDx1], [TxDx2], [MRNbr], [Notes], [PatientID], [PCPID], [ResidentID], [Status], [CaseID], [AdmitDate], [crtd_datetime] FROM [DailyBilling] WHERE ([crtd_datetime] = @crtd_datetime) and ([AssignedTo] = @AssignedTo) and ([HospitalID] = @HospitalID) ORDER BY [PatientName]" SqlDataSource1.SelectCommand = SelCmd SqlDataSource1.SelectParameters.Clear()
Dim parFilterProvider As New ControlParameter() parFilterProvider.ControlID = "ddlProvider" parFilterProvider.Name = "AssignedTo" parFilterProvider.Type = TypeCode.String SqlDataSource1.SelectParameters.Add(parFilterProvider)
Dim parFilterHospital As New ControlParameter() parFilterHospital.ControlID = "ddlHospitals" parFilterHospital.Name = "HospitalID" parFilterHospital.Type = TypeCode.String SqlDataSource1.SelectParameters.Add(parFilterHospital)
Dim parFilterStatus As New Parameter() parFilterStatus.Name = "crtd_datetime" parFilterStatus.DefaultValue = selDate.ToShortDateString parFilterStatus.Type = TypeCode.DateTime SqlDataSource1.SelectParameters.Add(parFilterStatus)
I am trying to select all records added between 2 dates that the user inputs into a form and am having problems. I had this working no problems with asp but can't seem to get it working with .net. BTW I am using SQL Server and Visual Studio.
The asp.net code I am trying to use is:
Me.SqlSelectCommand1.CommandText = "SELECT news_title, news_date, news_type, news_link FROM news WHERE (news_type = 'news') AND (news_date BETWEEN CONVERT(DATETIME, '"" & startdate & ""', 102) AND CONVERT(DATETIME, '"" & enddate & ""', 102))"
....
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim startdate As DateTime startdate = Request.Form("date_from")
Dim enddate As DateTime enddate = Request.Form("date_to")
right now I am able to retrieve the month and year from a field by month(TS_Date), Year(TS_Date), my question is can I put both results as one so output can say Date 2 2008 instead of two columns with month 2 year 2008. any help would be appreciated
I have a form that's filtering search results and porting to a gridview. The drop down is selecting from the date column of SQL, but i want it the default value to show all dates in the gridview. In a normal string field, you can just use "%", but a datetime field won't take this. What can i use to show all dates?
Hi all,Right now I have this SELECT statement:SELECT MUSIC_PK, MUSIC_TITLE, MUSIC_TITLE2, MUSIC_ORIGINAL_SINGER Now I want to add a second SELECT statement (same as above, but with an additional column) if the record was added within the 10 days (while still select other records, I just need to select an additional column). How would I do that? The additional column that I want to select is called MUSIC_NEW (so I can display if the record is new within 10 days.) I have a column in my table named DATE_ADDED, how do I go to calculate if it's within the 10 days since the day it was added to the current time?Thank you very much,Kenny.
I'm using the designer to create/modify strongly typed datasets. I have one select statement that I'm having considerable trouble with. The user selects search parameters from a form. These search parameters are used to filter the data sent to a gridview control. Three of these parameters are almost enough to make me abandon the dataset in this case.The first two are minimum and maximum age. I have a birth date field, but not an age field - ages have a habit of changing without user intervention <grin> and can be calculated. In ASP I'd do something like this:strSQL = "SELECT [DATE OF BIRTH], [FIRST NAME], [LAST NAME], [STATE], [MALE OR FEMALE] FROM members WHERE (DateDiff(yyyy, [DATE OF BIRTH], '" & date & "') >= " & strLowerAge & ") AND (DateDiff(yyyy, [DATE OF BIRTH], '" & date & "') <= " & strUpperAge & ")" I can't figure out how to get datediff working in the designer much less testing against upper and lower age limits.The third parameter is astrological sign. Again, I calculate it based on the birth date. I don't have a field for it. I could, but I would have to modify all the pages that add or edit records to the database to insure all the records that have birth dates also have the right sign. I'm leaning in that direction, but is it possible to accept a sign as a parameter and calculate, based on the birth date, which records qualify? I need to get the age issue fixed. The sign is a nice to have, since I can do it another way if I have to. BTW: I did decide to abandon the dataset in favor of a SqlDataSource control. This allowed me to build my select string in the code behind the way I would have in ASP. This resulted in paging and sorting not working properly. Sorting would be nice, paging is necessary. I'm pretty sure going back to the dataset or using a stored procedure would fix the paging problem, and I've yet to work with stored procedures (it's on my list of things to learn). Any comments or feedback on this would be avidly read and appreciated.Diane
ID PID From To Code 1 1 14/02/07 17/02/07 X 2 1 17/02/07 19/02/07 X 3 1. 19/02/07 23/02/07 E 4 1 26/02/07 28/02/07 X 5 1 1/4/07 1/5/07 E 6 2 01/03/07 03/03/07 X 7 2 04/03/07 10/03/07 X 8 2 10/03/07 14/03/07 E
Result
ID PID Date 4 1 26/02/07 7 2 04/03/07
I want to be able to create a select query on the above table. The table will show ID, PersonID (PID), From and to date, and code. If the code is X then the next €˜from record€™ should be the same date as the €˜to date€™. If the code is E then the next €˜to€™ date can be anytime after the previous €˜to€™ date. I want to be able to report on all record where there is a day difference between the previous €˜to€™ date. I.e. ID 4 and 7 €“ the previous records both have an X and there is at least a days difference between the dates.
I have a table with addresses and activity dates. I need to be able to retrieve the past 3 activity dates and see if the first and last occurred within 15 days. If so, I need to flag them.
Using max date gets me the last date but not the previous two. I was trying to use top 3 in desc order and that didnt seem to work either.
Hello. I'm having troubles with a query that (should) return all therecords between two dates. The date field is a datetime type. The db isSQL Server 2000. When I try thisSELECT RESERVES.RES_ID, PAYMENTS_RECEIVED.PYR_ID,PAYMENTS_RECEIVED.PYR_VALUE, PAYMENTS_RECEIVED.PYR_DATE,CUSTOMERS.CUS_NAMEFROM RESERVES LEFT OUTER JOINPAYMENTS_RECEIVED ON RESERVES.RES_ID =PAYMENTS_RECEIVED.RES_ID LEFT OUTER JOINCUSTOMERS ON RESERVES.CUS_ID = CUSTOMERS.CUS_IDWHERE (PAYMENTS_RECEIVED.PYR_DATE >= '2006-03-20 00:00:00') AND(PAYMENTS_RECEIVED.PYR_DATE < '2006-03-27 00:00:00')on a "query builder" in visual studio, I get the results that I want.But when I use exactly the same query on an asp 3 vbscript script, Iget no results (an empty selection).I've done everything imaginable. I wrote the date as iso, ansi, britishformat using convert(,103) (that's how users will enter the dates),i've used cast('20060327' as datetime), etc. But I can't still get itto work. Other querys from the asp pages work ok. Any ideas?thanks a lot in advance
I have a report that uses several filters including a from and to date filter, I have a field named TimeLastMod which is a Timestamp. I am extracting the From and To dates from this field using Select format(TimeLastMod,'MMM') as FromMonth,format(TimeLastMod,'MMM') as ToMonth From Eventlogs syntax.
These I pass on to a parameter and eventually to a tablix filter in an between opeartion. When I run the report, the records returned by the report is not what is expected as it sometimes returns an extra months data e.g., using between Aug and Sept will return october data as well.
How can I do this with Parameters? I can get a single parameter to filter for a single date (or even a combo list of the dates in DB). But I want my parameters to interact so that they specify a range. Is this possible?
Today I have got one scenario to calculate the (sum of days difference minus(-) the dates if the same date is appearing both in assgn_dtm and complet_dtm)/* Here goes the table schema and sample data */
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[temp_tbl]') AND type in (N'U')) DROP TABLE [dbo].[temp_tbl] GO CREATE TABLE [dbo].[temp_tbl]( [tbl_id] [bigint] NULL, [cs_id] [int] NOT NULL, [USERID] [int] NOT NULL,
I have a table that has hotel guests and their start stay date and end stay date, i would like to insert into a new table the original information + add all days in between.
I want to know if there is a way to compare dates in the sql statement with dates that I input into a database and todays date. the datatype that I'm using is smalldatetime.The statement I used is:Select Date from Table where Date > 'Today.now'I get an errorCould this be done or is there another approach?
I have a table which records employees'time-off records. There are 6 columns in this TimeOff table. They are RequestID, EmpName, StartDate, EndDate, Type, NumofDays. I have another table which has all the dates from 01/01/1950 to 01/01/2056.
I am trying write a query which lists all the dates between the timeoff startdate and enddate, including the the start and end dates, but my query so far only lists the start and end date in a timeoff record:
SELECT D.[Date], Datename(dw,D.[Date]) AS Weekday FROM Dates D LEFT JOIN TimeOff T ON D.[Date] = T.OffStartDate OR D.[Date] = T.OffEndDate WHERE (OffType = 'Sick Day' AND EmpName = 'Cat White') AND (D.[Date] BETWEEN T.StartDate AND T.EndDate)
Has anyone ever written a function to retrieve all individual dates between two given dates? Using DATEDIFF I can get the number of days between two dates. However I need to iterate through the days to identify weekend and holiday dates. Has anyone ever written a function to do this?
So, if select datediff(d,'07/01/2007','07/15/2007') as NumOfDays returns 14, I'd need to iterate through the 14 days and get the weekends and holidays. Would I have to use a cursor to iterate through the days?
I'm trying to generate this query, that displays Budget Current Year , Actual Current Year and Prior Year Revenue. When It comes to the Budget and Actual everything works fine, however when I try to add the query for the Prior Year I get an error, and I realized that the leap date is causing the error
Here is what I'm trying to generate
InnCodeID Quarterly Monthly Days Period Year BARmRev AARmRev PYRmRev
ADDIS Q1 Jan 1 1 2008 NULL NULL
ADDIS Q1 Jan 1 1 2008 3462.14 5107.65
ADDIS Q1 Jan 1 1 2008 NULL NULL
ADDIS Q1 Jan 1 1 2008 NULL NULL
Here is the error that I'm getting:
Code Snippet
Msg 242, Level 16, State 3, Line 1
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
(4834 row(s) affected)
Here is my Transact-SQL Syntax (summarized because I Couldn't post it):
SELECT
(CASE WHEN (CASE WHEN dbo.Trans.Tr_Dept = '10' AND dbo.Trans.TR_Main = '5120' AND dbo.Trans.tR_sub = '01'
AND Year(dbo.Trans.TR_Date) = Year(dbo.CurrentDate.CurrDate) AND dbo.trans.Datatype = '1'
THEN dbo.trans.Tr_Amount ELSE NULL END) IS NOT NULL THEN
(SELECT Trans1.TR_Amount
FROM dbo.Trans Trans1
WHERE Trans1.TR_Dept = '10' AND TR_Main = '5120' AND TR_Sub = '01' AND trans1.TR_Date = CAST((CAST(Month(dbo.Trans.TR_Date)
AS varchar(2)) + '/' + CAST(Day(dbo.Trans.TR_Date) AS varchar(2)) + '/' + CAST(Year(dbo.CurrentDate.CurrDate) AS varchar(4))) AS datetime)
AND Trans1.TR_Entity = dbo.Trans.TR_Entity AND trans1.datatype = dbo.Trans.DataType) ELSE NULL END) * - 1 AS BARmRev,
--AA Script Here AS AARmRev,
(CASE WHEN (CASE WHEN dbo.Trans.Tr_Dept = '10' AND dbo.Trans.TR_Main = '5120' AND dbo.Trans.tR_sub = '01' AND Year(dbo.Trans.TR_Date)
= Year(dbo.CurrentDate.CurrDate) AND dbo.trans.Datatype = '1' THEN dbo.trans.Tr_Amount ELSE NULL END) IS NOT NULL THEN
(SELECT SUM(Trans1.TR_Amount)
FROM dbo.Trans Trans1
WHERE RIGHT(RTRIM(Trans1.TR_Dept), 2) = '10' AND Trans1.TR_Main = '5120' AND Trans1.TR_Sub NOT BETWEEN '04' AND '05' AND
trans1.TR_Date = CAST((CAST(Month(dbo.Trans.TR_Date) AS varchar(2)) + '/' + CAST(Day(dbo.Trans.TR_Date) AS varchar(2))
+ '/' + CAST(Year(dbo.CurrentDate.CurrDate)-1 AS varchar(4))) AS datetime) AND Trans1.TR_Entity = dbo.Trans.TR_Entity AND
Hello All, I am trying to Add certain number of days to a particular date. and my requirement is that it need to exclude all saturdays and sundays and then give me the resultant date in Sqlserver. Please can anyone help me in achieving it. thanks Shiva Kumar
Hi can anyone help me , or am I on the wrong track.
Is there any easy way to create a stored procedure that inserts into a table the relevant months dates into a table based on the month and year as parameters. I.e say the parameters passed are 01/2001 hence based on this all of the month of January 2001 dates are inserted into a table in this format : 'Jan 01 2001 12:00:00'
We are deploying a system in the UK in SQL Server 6.5. They want the date to default to dd/mm/yy. Is there a way to set this on a permanent basis? Is there a way to set the server so any time a date is display, including getdate(), the result is dd/mm/yy?
I have a table which contains apart from other fields, 2 dates. i.e. startdate and enddate.
The startdate is always less than / equal to enddate.
I want to write a stored proc where I will give a date as a parameter and it should give me all the records there my date is between the startdate and the enddate.
Also I want to create a temp table in the procedure and the table gets populated with all the dates that comes between startdate and enddate, both dates inclusive.
I know this might be a tall order, but I am new to writing stored procedure, so I will be obliged if somebody can help me out
