SELECT Failed Because The Following SET Options Have Incorrect Settin
Aug 23, 2006
I am getting the following error message:
[-E-19:42] Message: SELECT failed because the following SET options have incorrect settings: 'CONCAT_NULL_YIELDS_NULL, ANSI_WARNINGS, ANSI_PADDING'. Verify that SET options are correct for use with indexed views and/or indexes on computed columns and/or query notifications and/or xml data type methods.
I am using the following set options before the sp is created:
SET ARITHABORT ON
SET CONCAT_NULL_YIELDS_NULL ON
SET QUOTED_IDENTIFIER ON
SET ANSI_NULLS ON
SET ANSI_PADDING ON
SET ANSI_WARNINGS ON
SET NUMERIC_ROUNDABORT OFF
I looked on the internet and most of solutions were related to indexed views or computed columns. But I am neither using any indexed views nor computed columns. Also the same sp is working fine in one environment but giving the above error in another SQL server. I am using SQL Server 2005 with SP1.
Please help me in finding the cause & the resolution for this issue.
View 9 Replies
ADVERTISEMENT
Jul 23, 2005
I am trying to insert a row into a table using a stored procedure and Iget the following error if I try this from QA:INSERT failed because the following SET options have incorrectsettings: 'ANSI_NULLS., QUOTED_IDENTIFIER'.If I try to run this from Microsoft Access, I get a slightly differenterror:INSERT failed because the following SET options have incorrectsettings: 'ANSI_NULLS., QUOTED_IDENTIFIER, ARITHABORT'.This is what I'm trying to run in QA:declare @P1 intset @P1=NULLexec stpAddNewDistributionMaster 142, 2, 'INTRODUCTION OF FILTERASSEMBLY', 0, 1, @P1 outputselect @P1===========================Here are the relevant definitions:TABLE:CREATE TABLE [dbo].[tblDistributionMaster] ([fldDistributionID] [int] IDENTITY (1, 1) NOT NULL ,[fldDocumentID] [int] NULL ,[fldDocumentType] [int] NULL ,[fldDocumentTitle] [varchar] (255) COLLATESQL_Latin1_General_CP1_CI_AS NULL ,[fldDocumentSiteID] [int] NULL ,[fldActive] [bit] NOT NULL) ON [PRIMARY]GOALTER TABLE [dbo].[tblDistributionMaster] WITH NOCHECK ADDCONSTRAINT [DF__Temporary__fldDo__2739D489] DEFAULT (0) FOR[fldDocumentID],CONSTRAINT [DF__Temporary__fldDo__282DF8C2] DEFAULT (0) FOR[fldDocumentType],CONSTRAINT [DF__Temporary__fldDo__29221CFB] DEFAULT (0) FOR[fldDocumentSiteID],CONSTRAINT [DF__Temporary__fldAc__2A164134] DEFAULT (1) FOR[fldActive],CONSTRAINT [aaaaatblDistributionMaster_PK] PRIMARY KEY NONCLUSTERED([fldDistributionID]) WITH FILLFACTOR = 90 ON [PRIMARY]GOCREATE INDEX [fldDistributionID] ON[dbo].[tblDistributionMaster]([fldDistributionID]) WITH FILLFACTOR =90 ON [PRIMARY]GOCREATE INDEX [fldDocumentID] ON[dbo].[tblDistributionMaster]([fldDocumentID]) WITH FILLFACTOR = 90 ON[PRIMARY]GOCREATE INDEX [fldDocumentSiteID] ON[dbo].[tblDistributionMaster]([fldDocumentSiteID]) WITH FILLFACTOR =90 ON [PRIMARY]GOCREATE INDEX [fldDocumentType] ON[dbo].[tblDistributionMaster]([fldDocumentType]) WITH FILLFACTOR = 90ON [PRIMARY]GO/****** The index created by the following statement is for internaluse only. ******//****** It is not a real index but exists as statistics only. ******/if (@@microsoftversion > 0x07000000 )EXEC ('CREATE STATISTICS [hind_37575172_1A_3A] ON[dbo].[tblDistributionMaster] ([fldDistributionID], [fldDocumentType])')GO/****** The index created by the following statement is for internaluse only. ******//****** It is not a real index but exists as statistics only. ******/if (@@microsoftversion > 0x07000000 )EXEC ('CREATE STATISTICS [hind_37575172_3A_1A] ON[dbo].[tblDistributionMaster] ([fldDocumentType], [fldDistributionID])')GO/****** The index created by the following statement is for internaluse only. ******//****** It is not a real index but exists as statistics only. ******/if (@@microsoftversion > 0x07000000 )EXEC ('CREATE STATISTICS [hind_37575172_2A_1A] ON[dbo].[tblDistributionMaster] ([fldDocumentID], [fldDistributionID]) ')GO/****** The index created by the following statement is for internaluse only. ******//****** It is not a real index but exists as statistics only. ******/if (@@microsoftversion > 0x07000000 )EXEC ('CREATE STATISTICS [hind_37575172_3A_2A] ON[dbo].[tblDistributionMaster] ([fldDocumentType], [fldDocumentID]) ')GO/****** The index created by the following statement is for internaluse only. ******//****** It is not a real index but exists as statistics only. ******/if (@@microsoftversion > 0x07000000 )EXEC ('CREATE STATISTICS [hind_37575172_2A_3A] ON[dbo].[tblDistributionMaster] ([fldDocumentID], [fldDocumentType]) ')GO/****** The index created by the following statement is for internaluse only. ******//****** It is not a real index but exists as statistics only. ******/if (@@microsoftversion > 0x07000000 )EXEC ('CREATE STATISTICS [hind_37575172_1A_2A_3A] ON[dbo].[tblDistributionMaster] ([fldDistributionID], [fldDocumentID],[fldDocumentType]) ')GOSET QUOTED_IDENTIFIER ONGOSET ANSI_NULLS ONGOCREATE TRIGGER "tblDistributionMaster_UTrig" ONdbo.tblDistributionMaster FOR UPDATE ASSET NOCOUNT ON/* * PREVENT UPDATES IF DEPENDENT RECORDS IN 'tblJobs' */IF UPDATE(fldDistributionID)BEGINIF (SELECT COUNT(*) FROM deleted, tblJobs WHERE(deleted.fldDistributionID = tblJobs.fldDistributionID)) > 0BEGINRAISERROR 44446 'The record can''t be deleted orchanged. Since related records exist in table ''tblJobs'', referentialintegrity rules would be violated.'ROLLBACK TRANSACTIONENDENDGOSET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS ONGOSET QUOTED_IDENTIFIER ONGOSET ANSI_NULLS ONGOCREATE TRIGGER "tblDistributionMaster_DTrig" ONdbo.tblDistributionMaster FOR DELETE ASSET NOCOUNT ON/* * CASCADE DELETES TO 'tblJobs' */DELETE tblJobs FROM deleted, tblJobs WHERE deleted.fldDistributionID =tblJobs.fldDistributionIDGOSET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS ONGO===========================SPROC:CREATE PROCEDURE stpAddNewDistributionMaster@DocumentID int,@DocumentType int,@Title varchar(255),@SiteID int,@Active bit,@DistributionID int OUTPUTASINSERT INTO tblDistributionMaster(fldDocumentID,fldDocumentType,fldDocumentTitle,fldActive,fldDocumentSiteID)VALUES(@DocumentID,@DocumentType,@Title,@Active,@SiteID)SET @DistributionID = IDENT_CURRENT('tblDistributionMaster')GO==============================Thanks in advanceEdward
View 4 Replies
View Related
Jul 20, 2005
I have tried many variations (after reviewing other posts) and can notresolve the following issue:RUNNING SQL MAINTENANCE----------------------------SET ARITHABORT ONSET CONCAT_NULL_YIELDS_NULL ONSET QUOTED_IDENTIFIER ONSET ANSI_NULLS ONSET ANSI_PADDING ONSET ANSI_WARNINGS ONSET NUMERIC_ROUNDABORT OFFexec master..xp_sqlmaint '-D SBC -UpdOptiStats 10 -RebldIdx 10'--tried UpdOptiStats and RebldIdx separately with same resultsRECEIVE THE FOLLOWING MESSAGE------------------------------[Microsoft SQL-DMO (ODBC SQLState: 42000)]Error 1934: [Microsoft][ODBC SQL Server Driver][SQL Server]UPDATE STATISTICS failed because the following SET options haveincorrect settings: 'QUOTED_IDENTIFIER, ARITHABORTSERVER SETUP-------------------------------Windows 2000, Service Pack 4SQL Server 2000 Standard Edition, Service Pack 3Any help is greatly appreciated.
View 1 Replies
View Related
Sep 20, 2006
When I want to delete a data from a table that this tabl has a triggerand this trigger reached another tables to delete the data in cursor Ihave this messeage:DELETE failed because the following SET options have incorrectsettings: 'QUOTED_IDENTIFIER'.My trigger :CREATE TRIGGER [TOPBASICIKISSILME] ON [dbo].[TBLDEPOBKTOPBASICIKIS]FOR DELETEASBEGINDECLARE @rows_affected int, @inc bigint , @dblid bigint ,@DEPOBKINCbigintSELECT @rows_affected = @@ROWCOUNTIF @rows_affected = 0RETURN -- No rows changed, exit triggerBEGINDECLARE Miktar CURSOR FORSELECT deleted.DBLID,deleted.TOPBASICIKISINC , deleted.DEPOBKINCFROM deletedOPEN MiktarFETCH NEXT FROM Miktar INTO @dblid,@inc,@DEPOBKINCWHILE @@fetch_status = 0BEGINSET QUOTED_IDENTIFIER ONDELETE FROM TBLDEPOBKMIKTAR WHERE DEPOBKINC=@DEPOBKINCAND OWNERINC = @inc AND ISLEMID=2 AND HAREKETID=19 AND BIRIM=1SET QUOTED_IDENTIFIER OFFPRINT @DEPOBKINCFETCH NEXT FROM Miktar INTO @dblid,@inc,@DEPOBKINCENDCLOSE MiktarDEALLOCATE MiktarENDEND
View 6 Replies
View Related
Oct 1, 2007
Hi, i have problem as subject says.
Db has table with 3 columns, ID, Key and Val. ID is primary key, Key has unique index and Val simple holds value in text format.
I have created DAL layer using .netTiers and CodeSmith. Generated procedures.sql has before every procedure set ANSI_NULLS to OFF.
When i read rows from table i print them on screen. When user changes value, that should also be updated in database.
When i select entity, its value is changed.
Here is code snipper.
Code Blockentity.Key = key;
entity.Value = value;
TransactionManager transactionManager = DataRepository.Provider.CreateTransaction();
try
{
transactionManager.BeginTransaction();
retVal = DataRepository.TestTableProvider.Update(entity);
transactionManager.Commit();
}
catch
{
transactionManager.Rollback();
throw;
}
I got an exception with message below:
UPDATE failed because the following SET options have incorrect settings: 'ANSI_NULLS'. Verify that SET options are correct for use with indexed views and/or indexes on computed columns and/or query notifications and/or xml data type methods.
Also, class which hold previous code snipper supports caching, by using some kind of SqlCacheManager, which is above SqlCacheDependecy class. Database service broker is started by
Code Block
ALTER DATABASE <DB_NAME> SET ENABLE_BROKER
Server is SqlExpress 2005.
Application is in ASP.NET 2.0.
I also noticed next.
On first run, previous code passes without errors. On second run, update error appears.
This is log from sql server.
Code BlockQuery notification delivery could not send message on dialog '{822C7891-736E-DC11-836B-005056C00008}.'. Delivery failed for notification '<qn:QueryNotification xmlns:qn="http://schemas.microsoft.com/SQL/Notifications/QueryNotificationhttp://schemas.microsoft.com/SQL/Notifications/QueryNotification">http://schemas.microsoft.com/SQL/Notifications/QueryNotification</A< A>>" id="1" type="change" source="database" info="restart" database_id="13" sid="0xE7C0751C9F7F6C4D9423096BBCC7FB69"><qn:Message>edd3e2dd-11ed-4d92-a0f4-5c674a90aecf;8b2095663cc6a9c297120e4c94d488555e97e54d</qn:Message></qn:QueryNotification>' because of the following error in service broker: 'The conversation handle "822C7891-736E-DC11-836B-005056C00008" is not found.'
Need fast answer.
Thanks in advance.
View 5 Replies
View Related
Oct 23, 2007
Hi
I am currently running the following query from Query Analyser, I am connected to Server_A and inserting records into
Server_B.Database_B.dbo.MyTable from Server_A .Database_A.dbo.TableRef
Insert into Server_B.Database_B.dbo.MyTable(Field1,Field2,Field3)
Select Field1_Ref,
Field2_Ref,
Field3_Ref
from Server_A .Database_A.dbo.TableRef
However Server_B.Database_B.dbo.MyTable is referenced within an Indexed View and whenever I run this query I get the following error:
Msg 1934, Level 16, State 1, Line 1
INSERT failed because the following SET options have incorrect settings: 'ARITHABORT'. Verify that SET options are correct for use with indexed views and/or indexes on computed columns and/or query notifications and/or xml data type methods.
I have tried setting ARITHABORT to ON & OFF within the Query and within the database properties but still recieve the same error.
Does anyone have any ideas on why this would not work?
Thanks
View 19 Replies
View Related
Jul 20, 2005
Hi,I am getting the following error when I run a stored procedure inwhich I am inserting/deleting data from a view that selects from aremote table.INSERT failed because the following SET options have incorrectsettings: 'ARITHABORT'The first statement in the stored procedure is 'set arithabort on'. Ialso ran 'set arithabort on' before creating the view.I read many articles ragarding the setting of arithabort. I set it forthe connection, for the database (alter database) and above all forthe server (sp_configure) but could not get around the above error.However, when I had made the setting using "sp_configure 'useroptions', 64" I was able to run the stored procedure successfully acouple of times. But, later when I had resest 'user options' to 0 andthen back to 64 just to reproduce the earlier error and confirm thatthe error does not come with the 'user options' to 64 setting I wasgetting the same error.Is there any way by which I can overcome the problem?Thanks,Iqbal
View 3 Replies
View Related
Jun 8, 2007
Hi All
I am using SQL Server 2005 with SP2. I have multi select parameter in the report. In SP2 reporting services gives Select All option in the drop down.
Is there any way I can remove that option from the list?
Thanks
View 4 Replies
View Related
Feb 29, 2008
Hi, I am new to this forum.
I have a question regarding select queries.
I need to to a select on a distinct field but need to output more that that field.
so if I have
select name, company, address, location_number from table abc
the location_number is the only field that has to be one per on output.
table abc will have
Alan Andrews abc company 1 Main st 00001
John Andrews abc company 1 Main st 00001
bob Smith ZZX Inc 3 broadway 00001
eric Roberts SSS, LLC 123 Elm ST 00002
Rick Roberts SSS, LLC 123 Elm ST 00002
Jay Smith JJJ Inc 524 5th ave 00002
shold result to
Alan Andrews abc company 1 Main st 00001
eric Roberts SSS, LLC 123 Elm ST 00002
Is there a way to do this?
when I say:
select distinct name, company, address, location_number from table abc
I still get all the records back because its doing a distinct across all the fields I am selecting.
Thanks!
Alan
View 6 Replies
View Related
May 14, 2015
I have a multivalue parameter that has X options. Is it possible to implement a solution that when I go into the report through an action, to have one option (in this case is the first) not selected all all the others are checked?
View 4 Replies
View Related
Sep 3, 2007
Hi
I get the following error when running a report in report builder using the Adventureworks sample model:
Semantic query execution failed. Incorrect syntax near 'NULLAND'.----------------------------Query execution failed for data set 'dataSet'.----------------------------An error has occurred during report processing.
Here is how to replicate the error:
Create a table report using the Adventure Works model.
Select Product entity, add Product Category and #Products to the table.
Edit formula for #Products to "COUNT(Products)" and add a filter on Products for "Discontinued Date is empty". (I want a count of products that have not been discontinued).
If you run the report now, it willl work as expected.
Add a report filter for "Product.Color is empty" (I only want to see products that don't have a color)
Run the report to get the above error.
While the above is a contrived example, I am getting the same error on a data model that I am developing for a customer.
Am I missing something, or is this a bug in Report Builder?
Thanks
View 2 Replies
View Related
Feb 13, 2007
Hi All
I have a report which has a multi-value parameter. Problem is, it can contain up to 100 options.Is there a way to limit the number of options that is passed to the SQL statement?. EG list has 100 options, user selects 10 but only the first 4 selected options are passed to the SQL statement.
Many Thanks
Delli
View 4 Replies
View Related
Sep 19, 2007
Hello, I have the following query. When I run the query I get the following error message: "Incorrect syntax near keyword SELECT"--------------------------------------------------- SELECT * FROM (SELECT ROW_NUMBER() OVER(ORDER BY DateAdded) AS rownum, * FROM SELECT TOP (100) PERCENT Videos.VideoId, Videos.UserId, Videos.UserName, Videos.Title, Videos.Description, Videos.Tags, Videos.VideoLength, Videos.TimesHeard, Videos.ImageURL, Videos.RecType, Videos.Language, Videos.Category, Videos.DateAdded, Videos.RewardProgram, Videos.EditorChoice, TB2.hitsFROM Videos LEFT OUTER JOIN (SELECT TOP (100) PERCENT VideoId, COUNT(*) AS hits FROM (SELECT TOP (100) PERCENT UserId, VideoId, COUNT(*) AS cnt1 FROM Hits GROUP BY VideoId, UserId) AS TB1 GROUP BY VideoId) AS TB2 ON Videos.VideoId = TB2.VideoIdORDER BY TB2.hits DESC) AS T1WHERE rownum <= 5----------------------------------------- If I run the query that is in BOLD as: SELECT *
FROM (SELECT ROW_NUMBER() OVER(ORDER BY DateAdded) AS rownum, * FROM Videos) AS T1 WHERE rownum <=5the query runs just fine. Also if I run the query that is NOT bold (above), it also runs fine. What can I do to run them both together as seen above? Thank in advance,Louis
View 4 Replies
View Related
Jul 20, 2005
I have a function that is designed to return a variable that containsconcatenated values from a partinular field in the returned rows:DECLARE @output varchar(8000)SELECT@output =CASEWHEN @output IS NULL THEN CAST(TSD.ScheduledTime ASvarchar(4))ELSE @output+ ', '+ ISNULL(CAST(TSD.ScheduledTime ASvarchar(4)),'')ENDFROM TSDWHERE ClientGUID = 2000001447020001 ANDParentGUID = 6000006684068001Select @outputThe variable returned with this code contains:"1200, 1400, 1200, 1400"I want to only get the unique values so that the variable returns "1200,1400". Seems simple enough just to add DISTINCT to the SELECT statement.However, what is returned is simply "1400".I cannot figure out why that is the case. Is there any explanation to thisresult?Side note: I can work around this by using a cursor but I would like toknow why DISTINCT does not work.Many thanks in advance for any help that can be provided!Pat
View 5 Replies
View Related
Apr 30, 2015
I am getting error "Incorrect syntax near the keyword 'Select'." while running the below query.
DECLARE @DATEPROCESS DATETIME;
SET @DATEPROCESS = CAST(DATEADD(D, -((DATEPART(WEEKDAY, GETDATE()) + 1 + @@DATEFIRST) % 7), GETDATE()) AS DATE)
insert into tempjoin([PART], [SPLRNAME], [SHIPDAYS], [SPRICE]) values
(Select distinct
RC. CAT_PART AS PART,
RC. CAT_SUPPLIER AS SUPPLIER,
FFC.[Ships Within Days] AS SHIPDAYS,
ffc.[Sell Price] AS SPRICE
[code]....
View 4 Replies
View Related
Mar 8, 2004
Hi,
Im fairly new to writing stored procudures so I thought you lot might be able to help with this problem.
I have a stored procudure which looks like this:
CREATE PROCEDURE usrCienet.spAdminAgencyActivate_Select
(
@strAgencyId CHAR(6)
)
AS
DECLARE @idAgency INT
SELECT @idAgency = idAgency FROM tblAgencies WHERE strAgencyId = @strAgencyId;
SELECT strName, strAddress1, strAddress2, strCounty, strCountry, strPostcode, strTelephone, strFax, bitActive, bitHeadOffice, bitFinanceBranch
FROM tblBranches
WHERE fk_idAgency = @idAgency
SELECT strFirstName, strSurname, strUsername, bitActive
FROM tblUsers
WHERE fk_idAgency = @idAgency
GO
It basically first declare's and sets @idAgency using the first small select statment, then uses that parameter to run two more selects queries which I want sending to a dataset. Now within the Query Analyzer this works fine. But in my asp.net page it trows up this error:
Exception Details: System.Data.SqlClient.SqlException: Line 1: Incorrect syntax near 'spAdminAgencyActivate_Select'
Now the code im using in the asp.net page is as follows:
Dim objSqlConnection as New SqlConnection(ConfigurationSettings.AppSettings("strCon"))
Dim objSqlCommand_Select as New SqlCommand("spAdminAgencyActivate_Select", objSqlConnection)
objSqlCommand_Select.Parameters.Add(New SqlParameter("@strAgencyId", SqlDbType.Char, 6))
objSqlCommand_Select.Parameters("@strAgencyId").Value = "tes001"
Dim objSqlDataAdapter as New SqlDataAdapter(objSqlCommand_Select)
Dim dsActivateAgency as New DataSet()
objSqlConnection.Open()
objSqlDataAdapter.TableMappings.Add("Table", "tblBranches")
objSqlDataAdapter.TableMappings.Add("Table1", "tblUsers")
objSqlDataAdapter.Fill(dsActivateAgency)
objSqlConnection.Close()
Can anyone help? I believe the error is in the stored procedure somewhere, because if I change the stored procedure so no parameters are being passed to it then it starts working. This is what I comment out and change for it to to get it working, but obviously this is not satisfactory as a final result because the parameter is hard coded in the stored procedure. Im just showing this to see if it gives anyone a clue!!
CREATE PROCEDURE usrCienet.spAdminAgencyActivate_Select
--(
--@strAgencyId CHAR(6)
--)
AS
--DECLARE @idAgency INT
--SELECT @idAgency = idAgency FROM tblAgencies WHERE strAgencyId = @strAgencyId;
SELECT strName, strAddress1, strAddress2, strCounty, strCountry, strPostcode, strTelephone, strFax, bitActive, bitHeadOffice, bitFinanceBranch
FROM tblBranches
WHERE fk_idAgency = 1
SELECT strFirstName, strSurname, strUsername, bitActive
FROM tblUsers
WHERE fk_idAgency = 1
GO
Thanks in advance for any help!!
- Carl S
View 1 Replies
View Related
Oct 7, 2015
Naming convention and what am I doing wrong here:
,(Select Count(C2.AppID) From Channels c left join Applications a on c.ChannelID = a.SourceID left join Contracts2 c2 on a.AppID = c2.AppID Where Channels.ChannelID = c.ChannelID and c2.DateContractFunded > (Select dateadd(yy,-1,DATEADD(yy, DATEDIFF(yy,0,getdate() ), 0))) and c2.DateContractFunded < (Select dateadd(ms,-3,DATEADD(yy, DATEDIFF(yy,0,getdate() ), 0))) ) As FundedLastYear
FROM Channels AS C
INNER JOIN ChannelContacts AS CC ON C.ChannelID = CC.ChannelID
INNER JOIN ChannelProductPlan AS CPP ON C.ChannelID = CPP.ChannelID
INNER JOIN tblLuMktReps AS MR ON C.MarketRepID = MR.MarketRepID
INNER JOIN tblLuHoldingCo AS HC ON C.HoldingCoID = HC.HoldingCoIDError message:
Msg 107, Level 16, State 3, Line 1
The column prefix 'Channels' does not match with a table name or alias name used in the query.
View 9 Replies
View Related
May 22, 2008
What I am trying to create a query to check, If recDT is not value or null, then will use value from SELECT top 1 recDtim FROM Serv. Otherwise, will use the value from recDT. I have tried the below query but it doesn't work. The error says, Incorrect syntax near the keyword 'SELECT'.Incorrect syntax near the keyword 'else'.1 SELECT
2 case when recDT='' then SELECT top 1 recDtim FROM Serv else recDT end
3 FROM abc
4
Anyone can help? Thanks a lot.
View 5 Replies
View Related
Sep 4, 2015
I'm trying to select only July from show_held but I keep on getting the error message saying:
Conversion failed when converting date and/or time from character string.
I get error message after I write this code:
ANDshow.show_held = '&July&'
As you can see from the below code, How do I select July from times_held_in_July?
SELECTevent_name,
DATENAME (MONTH, show_held) AS times_held_in_July
FROMevent,
show
WHEREevent.show_id = show.show_id
Result:
event_name times_held_in_July
DressageJuly
Jumping July
Led in July
Led in September
Led in May
DressageApril
DressageJuly
Flag and PoleJuly
SELECTevent_name,
DATENAME (MONTH, show_held) AS times_held_in_July
FROMevent,
show
WHEREevent.show_id = show.show_id
ANDshow.show_held = '&July&'
Result:
Msg 241, Level 16, State 1, Line 24
Conversion failed when converting date and/or time from character string.
View 6 Replies
View Related
Apr 30, 2008
Good day all.
Let's see if I can stump you with this one.....
Code Snippet
SELECT Account.New_DistributorAccountNumber, Account.New_NameonBill, ActivityPointer.Subject, ActivityPointer.CreatedOn AS ExprX
FROM Account INNER JOIN
ActivityPointer ON Account.AccountId = ActivityPointer.RegardingObjectId
UNION
SELECT Account_1.New_DistributorAccountNumber AS Expr1, Account_1.New_NameonBill AS Expr2, ActivityPointer_1.CreatedOn AS Expr19,
ActivityPointer_1.Subject AS Expr20
FROM Account AS Account_1 INNER JOIN
Contact AS Contact_1 ON Account_1.AccountId = Contact_1.AccountId INNER JOIN
ActivityPointer AS ActivityPointer_1 ON Contact_1.ContactId = ActivityPointer_1.RegardingObjectId
gives the error mentioned above. Each select statement, when run separately, works fine. Any clues?
Thank you in advance
View 4 Replies
View Related
May 27, 2008
This is the error it gives me for my code and then it calls out line 102. Line 102 is my buildDD(sql, ddlPernames) When I comment out this line the error goes away, but what I don't get is this is the same way I build all of my dropdown boxes and they all work but this one. Could it not like something in my sql select statement. thanksPrivate Sub DDLUIC_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles DDLUIC.SelectedIndexChanged
Dim taskforceID As Byte = ddlTaskForce.SelectedValueDim uic As String = DDLUIC.SelectedValue
sql = "select sidstrNAME_IND from CMS.dbo.tblSIDPERS where sidstrSSN_SM in (Select Case u.strSSN from tblAssignedPersonnel as u " _
& "where u.bitPresent = 1 and u.intUICID in (select intUICID from tblUIC where intTaskForceID = " & taskforceID & " and strUIC = '" & uic & "'))"ddlPerNames.Items.Add(New ListItem("", "0"))
buildDD(sql, ddlPerNames)
End Sub
View 2 Replies
View Related
Jul 16, 2003
Very often, when I generate SQL scripts for a table, I forget to go to Option tab to click the pk, default, index boxes. Is there a way to permernatly set the whole sql server generate sql scripts options ONCE?
thanks
David
View 2 Replies
View Related
Mar 10, 2006
HiI have created a Sql Script through Enterprise Manager for Drop acolumn. By default its creating lot of 'SET' commands. I doubt allthese SET options are required or not. Pls comment on this issueBEGIN TRANSACTIONSET QUOTED_IDENTIFIER ONSET TRANSACTION ISOLATION LEVEL SERIALIZABLESET ARITHABORT ONSET NUMERIC_ROUNDABORT OFFSET CONCAT_NULL_YIELDS_NULL ONSET ANSI_NULLS ONSET ANSI_PADDING ONSET ANSI_WARNINGS ONCOMMITBEGIN TRANSACTIONALTER TABLE EmployeeDROP COLUMN OrderDetails_IDGOCOMMITDil
View 2 Replies
View Related
Jan 18, 2008
Hi ,
I could do with a couple of pointers to the best options to acheive my goal, I'm pretty close with the way I've done it, but I feel there is a more elegant solution out their so your help would be most appreciated.
The problem is finding the best way of moving some SQL Server 2000 changed data into sql server 2005. We are only interested in some tables in 2000 (and sometimes just subsets of those). Because there are quite a few tables and the we want to set up a schedule to run periodically, we chose SSIS. The main reason for this is to utilise a for each loop that pulls each tables name from a one column staging table of table names. (that way we can do more or less comparisons by simply adding and removing from the staging table) Also in this loop, using the table name as a variable, we run an exec sql task along the lines of 'SELECT * from varTable EXCEPT SELECT * from varTable_tracker' which gives us the difference beteween the two tables (where the tracker table is a copy of the data table which is sychronised at the end of the job run). So far so good. Now the tricky bit, EXCEPT only works under 2005, the tables are in 2000 so we ended up having a linked server in 2005 back to the 2000 table. Is there a way of acheiving the same result without involving the linked server - or is there a task (script?) we can run to verify the linked server is up before we excecute the job -we already run checks on Connection Managers to see if they are up but never tried linked servers? Lastly, will performance be an issue
Thanks
View 5 Replies
View Related
May 4, 2002
anyone know about the undocument options of DBCC?
which options are undomented?
i.e.
log
There are only a few options which are documented in SQL Online Books
thank in advance
View 1 Replies
View Related
Dec 13, 1999
Is it necessary to reinstall SqlSvr 6.5 in order to chance
from 'per server' to 'per seat' licensing ?
View 1 Replies
View Related
Aug 2, 2001
SQL 6.5
What are the most critical "dbcc" options that should be run to insure the sanity of database and DBA alike? Do these have to be run in single user mode or can they be run while users are on the system?
Thank You.
View 1 Replies
View Related
Apr 29, 2007
An automatic monthly delete has recently grown from 15 to 20 million rows. It is now filling my 70GB T-Log completly. I don't have any space to expand the T-Log. Do I have any options other than reducing the number of rows in the delete?
View 2 Replies
View Related
Jan 21, 2004
hey guys, i need your help please.
here is the scenario:
1. I need to return a data back to client (result set varies 20-10,000)
2. I only want to show 20 records at a time
3. To get info i need to display i need to join 10 tables
When there are small #s of records it works but when i get over 8000 then it becomes a problem:
1. The first version was:
Get all data using big query and return everything back to client and display only 20 at a time (not very proficient).
Takes around 15 seconds to view 20 records.
2. Inspired by 4GuysFromRolla (http://www.4guysfromrolla.com/webtech/062899-1.shtml)
Use Stored Procedure w/ server side paging logic to get 20 records at the time. I had to pass every filter parameter and stuff. SP had to sort resultset and return only 20 records i need to display.
Takes around 5 seconds to view 20 records.
I still think it's slow, i know this is a very broad question but is there any other way to do it, logically?
Any help is appreciated.
Wojo.
View 14 Replies
View Related
Apr 10, 2004
Hi folks, Recently i've installed a fresh Installation of Opertaing Sys and SQL.
Win 2000 server, sp4
SQl 2000 Enterprise, sp3.
I am using Domain user service startup for sql and is member of domain admin. I've manually added the user in Local-Admin group of the system. Obviously it's also has Sys-Admin server roles.
The problem is; when i use enterprise manager and change any of the server settings; Priority Boost or Fix Memory Allocation for the Sql server, nothing happens, the options dialog box closes and doesn't ask for restarting the server neither does the settings take effect when i restart SQL.
However if i change the settings using sp_configure using the same user; it works. i've assigned a fixed memory to SQL but the option "Reserver Physical Memory For SQL" won't work. Couldn't find this option in SP_Configure.
Any ideas, what has gone wrong.
View 6 Replies
View Related
Aug 14, 2007
Hi all,
This follows on from a query I had a few days back (and for which I was promptly flamed! However, I've got skin like a rhinoseros, so here goes...)
I have a table - ProjectSite - that is pulling information from a two tables (Project and Site). This table contains data regarding which sites are part of which project.
I now want a means of reporting dates against this. The problem is that each project has bespoke milestone dates, so I can't just create columns in ProjectSite. The only solution I can see is to pull each project (and there's quite a few and its corresponding sites into a new table) and then I can create my bespoke columns.
Does this sound like the best viable option, or can anyone suggest another means of doing this?
TIA,
SamuelT
View 1 Replies
View Related
Aug 7, 2006
Hello all,
I am considering the different options for package deployment on the server.
Until now, I have found several different ways to deploy packages to the server (File System):
Using the Import option from the Management Studio (only one by one)
Using the Deployment Utility (Needs building the whole project. Opens all the packages in debugging mode, cannot deploy to different folders)
Using the dtutil by constructing a command line for each package deployment. (complicated)
Simply copying the files from the local project folder to the "Program FilesMicrosoft SQL Server90DTSPackages" folder on the server.
Does anyone have any other suggestions for deployment?
The 4th seems to be the easiest one, but I seen anybody suggesting such an action. What's the downside of such an action?
Thanks,
Liran
View 1 Replies
View Related
Oct 4, 2007
I hoipe someone can point me in the right direction here.
I have an application with the following requirements (using SQL CE 2 alas)
A set of tables on the server that need to be imported to the handheld. Using rda, I need to get the modifications to these tables from the server (add/edit/delete) but the handheld will never update these tables.
A set of tables on the server that need to be imported to the handheld. The handheld needs to add/edit existing records, and it needs to get any changes from the server.
A set of tables on the server where the handheld needs to import a subset of the records. It needs to add (but not edit) new records, upload the new records to the server, and download any changed (add/edit/delete) records to the handheld.
What tracking options should I use in these 3 cases?
The problem comes in that I need to have some foreign key relationships in the database on the handheld. Since rda munges the names of primary keys (and indexes), I do not know of a good way to add these foreign key constraints. Any suggestions?
Thanks
View 2 Replies
View Related
