SELECT Highest Value Of Duplicate Field
Mar 25, 2008
I have a table like
TradeID ActionID
58096 3663
58096 3664
78901 2235
78901 2236
I want to select the only the TradeID with the highest ActionID
I tried using
select distinct tradeid,actionid
From
cct
Where ActionID = (SELECT MAX(ActionID)
FROM cct1
WHERE cct1.TradeID = cct.TradeID)
group by tradeid,actionid
but the result is not correct
please help
In god we trust,everything else we test.
View 4 Replies
ADVERTISEMENT
Aug 20, 2007
Hi,
I have several row records in which
name email
--------- ---------
name1 abc@abc.com
name2 abc@abc.com
name3 abc@abc.com
name4 123@123.com
name6 123@123.com
How should I write the query which can return records with unique email address with any name attached?
The expected record set will be
name email
--------- ---------
<any> abc@abc.com
<any> 123@123.com
I was thinking to select the distinct of email and just stuck at here. I encountered this problem few times and still cannot solve it. Any help will great appreciated. Thanks in advance.
View 7 Replies
View Related
Mar 15, 2004
I am looking for some help in pulling certain people out of a table
This is the basic setup of my table
PK ID NAME MEETING
1 11111 Joe CLASS98
2 22222 Jane CLASS98
3 33333 Bob CLASS98
4 11111 Joe CLASS04
5 22222 Jane CLASS04
6 44444 Sally CLASS04
What I am wanting to do is Select only the people who attended CLASS98 but didn't attend CLASS04
I could just remove the CLASS04 people by sorting if I could just return the rows that do not duplicate the ID and meeting is either CLASS04 or CLASS98
Either way would get me to my goal.
Any help is GREATLY appreciated.
Thanks
Jimmyjoe
View 11 Replies
View Related
Jan 22, 2012
I have recently decided to dedupe my data but i am having a problem after running fuzzy grouping with the query on updating which duplicate to keep
_key_in is unique, _key_out is the duplicates so for example:
_key_in , _key_out , name , score , dedupe
1 , 1 , ron , 10 , purge
2 , 1 , ronn , 15 , keep
3 , 3 , john , 5 , keep
4 , 4 , matt , 15 , keep
5 , 4 , mat , 10 , purge
6 , 4 , matt , 15 , purge
I want to keep the _key_out with the higher score by setting the field de_dupe to 'keep' and the remainder to 'purge'. The score can also be the same within a duplicate so in the case it is the same i just need to keep one it doesnt matter which one. The query i have below nearly works but it marks duplicates with the same score as keep.
Code:
UPDATE b
SET b.dedupe_result = 'keep'
FROM
[BusinessListings].[dbo].[MongoOrganisationACTM1Destination] b
INNER JOIN
[Code] ....
View 2 Replies
View Related
Apr 12, 2008
Hello all,
Here is an SQL Server 2005 table that lists player scores:
Code Snippet
+--------+--------+----------+
| NAME | POINTS | DATE |
+--------+--------+----------+
| Liz | 7 | 01/04/08 |
| Mark | 20 | 15/03/08 |
| John | 9 | 04/01/08 |
| Liz | 25 | 25/12/07 |
| Liz | 11 | 10/04/08 |
| Mark | 11 | 22/03/08 |
| Patty | 20 | 08/04/08 |
+--------+--------+----------+
I'd like to get, for each player, his/her best performance, including the date. Concretely, my SELECT query should return:
Code Snippet
+--------+--------+----------+
| NAME | POINTS | DATE |
+--------+--------+----------+
| Liz | 25 | 25/12/07 |
| Mark | 20 | 15/03/08 |
| John | 9 | 04/01/08 |
| Patty | 20 | 08/04/08 |
+--------+--------+----------+
does someone have any idea ?
Thx
View 3 Replies
View Related
Oct 2, 2007
Hello Everyone:
I am using the Import/Export wizard to import data from an ODBC data source. This can only be done from a query to specify the data to transfer.
When I try to create the tables, for the query, I am getting the following error:
Msg 2714, Level 16, State 4, Line 12
There is already an object named 'UserID' in the database.
Msg 1750, Level 16, State 0, Line 12
Could not create constraint. See previous errors.
I have duplicated this error with the following script:
USE [testing]
IF OBJECT_ID ('[testing].[dbo].[users1]', 'U') IS NOT NULL
DROP TABLE [testing].[dbo].[users1]
CREATE TABLE [testing].[dbo].[users1] (
[UserID] bigint NOT NULL,
[Name] nvarchar(25) NULL,
CONSTRAINT [UserID] PRIMARY KEY (UserID)
)
IF OBJECT_ID ('[testing].[dbo].[users2]', 'U') IS NOT NULL
DROP TABLE [testing].[dbo].[users2]
CREATE TABLE [testing].[dbo].[users2] (
[UserID] bigint NOT NULL,
[Name] nvarchar(25) NULL,
CONSTRAINT [UserID] PRIMARY KEY (UserID)
)
IF OBJECT_ID ('[testing].[dbo].[users3]', 'U') IS NOT NULL
DROP TABLE [testing].[dbo].[users3]
CREATE TABLE [testing].[dbo].[users3] (
[UserID] bigint NOT NULL,
[Name] nvarchar(25) NULL,
CONSTRAINT [UserID] PRIMARY KEY (UserID)
)
I have searched the "2714 duplicate error msg," but have found references to duplicate table names, rather than multiple field names or column name duplicate errors, within a database.
I think that the schema is only allowing a single UserID primary key.
How do I fix this?
TIA
View 4 Replies
View Related
Jun 19, 2007
Hai frendz,
I am having a table named Employee(int EID, float Salary)...
Now I want to select the highest salary in the table and the query is-
"select top 1 EID, Salary from Employee ORDER BY Salary DESC"
Now I need to write a query which selects the second highest salary.
So how to achieve this?..
thanx
View 6 Replies
View Related
Sep 21, 2004
Hello,
I have the following problem.
I have three Columns
name / version / package
I want to create a select query, that shows me all names and their actuall package. The actual Package is the record with the highest version number.
For Example my Database has the following entries :
name / version / package
name1 / 1 / package1
name2 / 1 / package1
name2 / 2 / package3
name3 / 1 / package2
The output should look like this :
name1 / 1 / package1
name2 / 2 / package3
name3 / 1 / package2
Has anyone a idea and can help me ?
Thanks in Advance
Mirco
View 4 Replies
View Related
Aug 26, 2004
Hi all,
Hopefully you can assist this pleb (me) with some (hopefully) basic scripting.
I have a table which has bucket loads of rows in it (funnily enough)
Field1 & Field2
Field1 is repeated numerous times (but also has differing values) through the table
Field2 is a numeric value which is assigned to the Field1
What I need to do is pull back all the unique Field1's but only those with the highest value in Field2
Example:
Field1 Field2
blah 100
blah 400
blah1 12
blah1 9
blah1 2
blah 350
I need the return to be basically:
Field1 Field2
blah 400
blah1 12
I am sure that this has to be straight forward - however my brain just isn't connected the right way at the moment....
Thanks in advance for any assistance on this.
Troy
View 2 Replies
View Related
Mar 25, 2008
Hi,
I need help on this one. Let's say I have a table like this:
Table_ID Value SomeOtherTable_ID
1 2 1
2 4 1
3 1 2
4 5 3
5 3 2
6 0 1
How can I get only two rows of each SomeOtherTable_ID? The result that I want is this:
SomeOtherTable_ID Value
1 4
1 2
2 3
2 1
3 5
Thanks in advance
View 2 Replies
View Related
May 15, 2015
I have a stored proc which evaluates a table of 'tasks' to return the task with the highest priority for a given user - at the same time, once that task has been found - I want to allocate that user to the task.
I have created a stored proc that works...however I'm sure this requirement /pattern is common & I would like some best practice for this pattern of update and select within a transaction.
Here is some sample data:
use tempdb;
go
if OBJECT_ID('Tasks', 'U') is not null
drop table tasks;
go
create table tasks (
TaskId int identity primary key,
[Code] ....
And here's what my current stored proc looks like;
if OBJECT_ID('pGetNextTask', 'P') is not null
drop proc pGetNextTask;
go
create proc pGetNextTask (
@UserID char(10),
@TaskID int output
)
[Code] ....
View 3 Replies
View Related
Apr 21, 2007
Hi,
in table aspnet_membership of ASPNETDB.mdb file, i saw a kind of duplicate field like "LoweredEmail" containing the same value as field "Email" (also in table users field "LoweredUsername" ..).
I guess it's for containing email in lowercase, but why those fields?
Thanks
Tartuffe
View 2 Replies
View Related
Feb 29, 2000
I have a field called RegId. RegId is of datatype NVARCHAR (20).
RegId
-----
12322
2122111
23423
etc
etc
I want to run a query to find out if there are duplicate entries in this field.
Any ideas on how I can achieve this?
Thanks in advance,
Anthony
View 1 Replies
View Related
Jan 9, 2004
I deliberately intend to add some duplicates to one of my tables. For eg
Job User IsAdmin
JobID 235User ID 1
JobID 235User ID 5
JobID 235User ID 9
JobID 235User ID 5
JobID 235User ID 2
JobID 235User ID 9
JobID 235User ID 10
JobID 235User ID 1
I know its bad practice to do such a thing but there is a genuine reason. What I need to do is to be able to have a SQL statement that appends true to the IsAdmin field whenever it encounters the next UserID thats happens to be a duplicate. Hence the above would look like:
Job User IsAdmin
JobID 235User ID 1
JobID 235User ID 5
JobID 235User ID 9
JobID 235User ID 5 True
JobID 235User ID 2
JobID 235User ID 9 True
JobID 235User ID 10
JobID 235User ID 1 True
Thanks
View 1 Replies
View Related
Jul 10, 2007
Hi everybody couldn't get through with saving my data on the table with two primary keys...
my table structure is this
pubidintUnchecked (primary key)
pubchar(1)Unchecked
publchar(1)Unchecked
pubcodechar(2)Unchecked (primary key)
a sample data is here
pubid pub publ pubcode
1 a b ab
1 b b bb
2 a b ab
2 b b bb
when i save this table modifying the pubid and pubcode as primary keys the following error displays...
Unable to create index 'PK_PUBS3'.
CREATE UNIQUE INDEX terminated because a duplicate key was found for index ID 1. Most significant primary key is '51'.
Could not create constraint. See previous errors.
The statement has been terminated.
what i understand is that on the primary key duplicates are not allowed how could i allow it?
thanks
View 7 Replies
View Related
Oct 17, 2005
Obviously, I'm a complete n00b at SQL.
I have a table in Access 2003 with about 6,000 records and there are about 20 records that have duplicate data in the first field (CompID).
I'm trying to make the first field my primary key, so I need to fix these duplicate entry.
I could export to Excel and fix the problem that way, but in the interest of learning SQL I want to figure out how to do it properly.
Thanks in advance for what is hopefully a simple answer.
View 1 Replies
View Related
Jan 3, 2007
Hi All !
Below is a snippet of MS SQL inside ASP that retieves
Commodity info such as product names and related information and returns the results in an ASP Page. My problem is that with certain searches, elements returned in the synonym field repeat. For instance, on a correct search I get back green, red, blue, and yellow which is correct. On another similar search different commodity say for material, I get Plastic, Glass,Sand - Plastic, Glass,Sand - Plastic Glass Sand. I want to remove the repeating elements returned in this field. I hope this makes sense.
PS I tried to use distinct but with no luck I want just one of each in the example below.
Thanks in Advance!
Scott
==============================
SQL = ""
SQL = "SELECT B.CIMS_MSDS_NUM," & _
"A.COMMODITY_NUMBER, " & _
"B.CIMS_TRADE_NME," & _
"B.CIMS_MFR_NME," & _
"B.CIMS_MSDS_PREP_DTE," & _
"B.APVL_CDE," & _
"COALESCE(C.REGDMATLCD,'?') AS DOTREGD," & _
"COALESCE( D.CIMS_TRADE_SYNM,'NO SYNONYMS') AS SYNONYM, " & _
"A.MSDS_CMDTY_VERIF, " & _
"A.CATALOG_ID " & _
"FROM ( MATEQUIP.VMSDS_CMDTY A " & _
" RIGHT OUTER JOIN MATEQUIP.VCIMS_TRD_PROD_INF B " & _
" ON A.CIMS_MSDS_NUM = B.CIMS_MSDS_NUM " & _
" LEFT OUTER JOIN MATEQUIP.VDOT_TRADE_PROD C " & _
" ON A.CIMS_MSDS_NUM = C.MSDSNUM " & _
" LEFT OUTER JOIN MATEQUIP.VCIMS_TRD_PROD_SYN D " & _
" ON B.CIMS_MSDS_NUM = D.CIMS_MSDS_NUM) "
SQL1 = ""
SQL1 = SQL
SQL = SQL & "WHERE " & Where & " "
==================================
Here is a piece of the problem field, note repeating colors etc.
CCM-PAINTS & COATINGS (1/26/98)F65E36 ORANGE F65W1 GLOSS WHITEF65B50 WR. IRON FLAT BLACK F65R2 TARTAR RED DARKF65B4 SEMI-GLOSS BLACK F65R1 VERMILIONF65B1 GLOSS BLACK F65N11 RICH BROWNF65A49 ASA #49 GRAY F65M1 MAROONF65A4 MACHINE TOOL GRAY F65L10 BRIGHT BLUEF65A2 LIGHT GRAY F65L7 PALE BLUEF65A1 WARM GRAY F65L6 TURQUOISEF65L4 DARK BLUEF65L3 LIGHT BLUE V65V100 MIXING CLEARF65H1 IVORY F65Y48 LIGHT YELLOWF65G41 FOREST GREEN F65Y44 LEMON YELLOWF65G40 MEDIUM GREEN F65W100 MIXING WHITEF65G39 LIGHT GREEN F65W4 TINTING WHITEF65G16 SEMI-GLOSS MACHINERY GRE F65W3 CUSTOM WHITEF65E37 INTERNATIONAL ORANGE F65W2 SEMI-GLOSS WHITEF65B50 WR. IRON FLAT BLACK F65R2 TARTAR RED DARKF65B4 SEMI-GLOSS BLACK F65R1 VERMILIONF65B1 GLOSS BLACK F65N11 RICH BROWNF65A49 ASA #49 GRAY F65M1 MAROONF65A4 MACHINE TOOL GRAY F65L10 BRIGHT BLUEF65A2 LIGHT GRAY F65L7 PALE BLUEF65A1 WARM GRAY F65L6 TURQUOISEDISAPPROVED BY CCM-PAINTS & COATINGS (1/26/98)F65L4 DARK BLUEF65L3 LIGHT BLUE V65V100 MIXING CLEARF65H1 IVORY F65Y48 LIGHT YELLOWF65G41 FOREST GREEN F65Y44 LEMON YELLOWF65G40 MEDIUM GREEN F65W100 MIXING WHITEF65G39 LIGHT GREEN F65W4 TINTING WHITEF65G16 SEMI-GLOSS MACHINERY GRE F65W3 CUSTOM WHITEF65E37 INTERNATIONAL ORANGE F65W2 SEMI-GLOSS WHITEF65E36 ORANGE F65W1 GLOSS WHITEDISAPPROVED BY CCM-PAINTS & COATINGS (1/26/98)F65A2 LIGHT GRAY F65L7 PALE BLUEF65A1 WARM GRAY F65L6 TURQUOISEF65B4 SEMI-GLOSS BLACK F65R1 VERMILIONF65B1 GLOSS BLACK F65N11 RICH BROWNF65A49 ASA #49 GRAY F65M1 MAROONF65A4 MACHINE TOOL GRAY F65L10 BRIGHT BLUEF65L4 DARK BLUEF65L3 LIGHT BLUE V65V100 MIXING CLEARF65H1 IVORY F65Y48 LIGHT YELLOWF65G41 FOREST GREEN F65Y44 LEMON YELLOWF65G40 MEDIUM GREEN F65W100 MIXING WHITEF65G39 LIGHT GREEN F65W4 TINTING WHITEF65G16 SEMI-GLOSS MACHINERY GRE F65W3 CUSTOM WHITEF65E37 INTERNATIONAL ORANGE F65W2 SEMI-GLOSS WHITEF65E36 ORANGE F65W1 GLOSS WHITEF65B50 WR. IRON FLAT BLACK F65R2 TARTAR RED DARKF65A1 WARM GRAY F65L6 TURQUOISEDISAPPROVED BY CCM-PAINTS
View 2 Replies
View Related
Oct 22, 2007
my table structure is
id field1
1 i am from india
2 i am from usa
3 i am from delhi
So i want to remove common data from field1 , means after run the query table should be like
id field1
1 india
2 usa
3 delhi
thanks in advance
saumitra tamrakar
View 8 Replies
View Related
Jan 3, 2007
Hi All,
Below is a snippet of MS SQL inside some VB that retieves
Commodity info such as product names and related information and returns the results in an ASP Page. My problem is that with certain searches, elements returned in the synonym field repeat. For instance, on a correct search I get green, red, blue, and yellow which is correct. On another similar search with different commodity say for material, I get Plastic, Glass,Sand - Plastic, Glass,Sand - Plastic, Glass, Sand. I want to remove the repeating elements returned in this field. IOW, I just need one set of Plastic, Glass and Sand. I hope this makes sense.
Below is the SQL and the results from the returned page.
PS I tried to use distinct but with no luck I want just one of each in the example below.
Thanks in Advance!
Scott
==============================
SQL = ""
SQL = "SELECT B.CIMS_MSDS_NUM," & _
"A.COMMODITY_NUMBER, " & _
"B.CIMS_TRADE_NME," & _
"B.CIMS_MFR_NME," & _
"B.CIMS_MSDS_PREP_DTE," & _
"B.APVL_CDE," & _
"COALESCE(C.REGDMATLCD,'?') AS DOTREGD," & _
"COALESCE( D.CIMS_TRADE_SYNM,'NO SYNONYMS') AS SYNONYM, " & _
"A.MSDS_CMDTY_VERIF, " & _
"A.CATALOG_ID " & _
"FROM ( MATEQUIP.VMSDS_CMDTY A " & _
" RIGHT OUTER JOIN MATEQUIP.VCIMS_TRD_PROD_INF B " & _
" ON A.CIMS_MSDS_NUM = B.CIMS_MSDS_NUM " & _
" LEFT OUTER JOIN MATEQUIP.VDOT_TRADE_PROD C " & _
" ON A.CIMS_MSDS_NUM = C.MSDSNUM " & _
" LEFT OUTER JOIN MATEQUIP.VCIMS_TRD_PROD_SYN D " & _
" ON B.CIMS_MSDS_NUM = D.CIMS_MSDS_NUM) "
SQL1 = ""
SQL1 = SQL
SQL = SQL & "WHERE " & Where & " "
==================================
Here is a piece of the problem field, note repeating colors etc.
CCM-PAINTS & COATINGS (1/26/98)F65E36 ORANGE F65W1 GLOSS WHITEF65B50 WR. IRON FLAT BLACK F65R2 TARTAR RED DARKF65B4 SEMI-GLOSS BLACK F65R1 VERMILIONF65B1 GLOSS BLACK F65N11 RICH BROWNF65A49 ASA #49 GRAY F65M1 MAROONF65A4 MACHINE TOOL GRAY F65L10 BRIGHT BLUEF65A2 LIGHT GRAY F65L7 PALE BLUEF65A1 WARM GRAY F65L6 TURQUOISEF65L4 DARK BLUEF65L3 LIGHT BLUE V65V100 MIXING CLEARF65H1 IVORY F65Y48 LIGHT YELLOWF65G41 FOREST GREEN F65Y44 LEMON YELLOWF65G40 MEDIUM GREEN F65W100 MIXING WHITEF65G39 LIGHT GREEN F65W4 TINTING WHITEF65G16 SEMI-GLOSS MACHINERY GRE F65W3 CUSTOM WHITEF65E37 INTERNATIONAL ORANGE F65W2 SEMI-GLOSS WHITEF65B50 WR. IRON FLAT BLACK F65R2 TARTAR RED DARKF65B4 SEMI-GLOSS BLACK F65R1 VERMILIONF65B1 GLOSS BLACK F65N11 RICH BROWNF65A49 ASA #49 GRAY F65M1 MAROONF65A4 MACHINE TOOL GRAY F65L10 BRIGHT BLUEF65A2 LIGHT GRAY F65L7 PALE BLUEF65A1 WARM GRAY F65L6 TURQUOISEDISAPPROVED BY CCM-PAINTS & COATINGS (1/26/98)F65L4 DARK BLUEF65L3 LIGHT BLUE V65V100 MIXING CLEARF65H1 IVORY F65Y48 LIGHT YELLOWF65G41 FOREST GREEN F65Y44 LEMON YELLOWF65G40 MEDIUM GREEN F65W100 MIXING WHITEF65G39 LIGHT GREEN F65W4 TINTING WHITEF65G16 SEMI-GLOSS MACHINERY GRE F65W3 CUSTOM WHITEF65E37 INTERNATIONAL ORANGE F65W2 SEMI-GLOSS WHITEF65E36 ORANGE F65W1 GLOSS WHITEDISAPPROVED BY CCM-PAINTS & COATINGS (1/26/98)F65A2 LIGHT GRAY F65L7 PALE BLUEF65A1 WARM GRAY F65L6 TURQUOISEF65B4 SEMI-GLOSS BLACK F65R1 VERMILIONF65B1 GLOSS BLACK F65N11 RICH BROWNF65A49 ASA #49 GRAY F65M1 MAROONF65A4 MACHINE TOOL GRAY F65L10 BRIGHT BLUEF65L4 DARK BLUEF65L3 LIGHT BLUE V65V100 MIXING CLEARF65H1 IVORY F65Y48 LIGHT YELLOWF65G41 FOREST GREEN F65Y44 LEMON YELLOWF65G40 MEDIUM GREEN F65W100 MIXING WHITEF65G39 LIGHT GREEN F65W4 TINTING WHITEF65G16 SEMI-GLOSS MACHINERY GRE F65W3 CUSTOM WHITEF65E37 INTERNATIONAL ORANGE F65W2 SEMI-GLOSS WHITEF65E36 ORANGE F65W1 GLOSS WHITEF65B50 WR. IRON FLAT BLACK F65R2 TARTAR RED DARKF65A1 WARM GRAY F65L6 TURQUOISEDISAPPROVED BY CCM-PAINTS & COATINGS (1/26/98)F65B1 GLOSS BLACK F65N11
View 1 Replies
View Related
Jul 23, 2001
Hello,
Not sure how to do this. I think I need to use a Group By query. I have a "Products" table with the following fields:
Program#
Number
UPC
Item
Item#
Size
Dept
Everything is specific to the Program#. In other words, for every instance of a Program# there can be more than one Product, which is specified by the "Number" field. So: SELECT * FROM Product WHERE [Program#] = '12345' should return this:
12345 | 1 | 000012345678 | Cookies | 98765 | 12ct | Retail |
12345 | 2 | 000012345678 | Cake | 98765 | 12ct | Retail |
12345 | 3 | 000012345678 | Ice Cream | 98765 | 12ct | Retail |
However, some recordsets are returning like this:
12345 | 1 | 000012345678 | Cookies | 98765 | 12ct | Retail
12345 | 1 | 000012345678 | Cake | 98765 | 12ct | Retail
12345 | 2 | 000012345678 | Ice Cream | 98765 | 12ct | Retail
In which case I have to fix them (the "Number" field) with an update query sp they are numbered sequentially. Luckily, this doesn't happen very often.
Can someone help me with a query that will return only those records with duplicate values in the "Number" field? I am not sure how to construct this query which I will use as a stored procedure.
TIA,
Bruce Wexler
Programmer/Analyst
View 1 Replies
View Related
Jul 20, 2005
I have a .NET program that can connect to either an Access 97 database or anSQL Server 7 database. In the database I have two tables which have a fieldcalled ID. When I run a query like "SELECT A.*, B.* FROM A, B", the queryreturns those fields as "A.ID" and "B.ID" when connected to Access 97, butas "ID" and "ID" in SQL Server 7. Is there anyway to get SQL Server toprepend the table name to the field name in a case like this and not returnduplicate field names like that without having to specify aliases for thefields?- Don
View 1 Replies
View Related
Mar 27, 2006
I am importing a file creating by an application which exports the file into .dbf format. Very unfortunately, this .dbf file can have fields with IDENTICAL column_names. Utilizing ActiveX, I create an ado connection to the .dbf file using a visual foxpro drver. However, and not unexpectantly, I can not do the 'select *' from the file if there are duplicate names.
Can anyone make recommendations here that might help?
Oh, this is SQL200 in case that impacts what you might advise!!!!
View 2 Replies
View Related
May 28, 2015
In my SSIS package, i have a field test_method_number coming from OLE DB Source. I used Derived transformation to trim test_method_number: TRIM(test_method_number)
Now in the next Derived Transformation, i see duplicate test_method_number. How to get rid of this duplicate?
View 6 Replies
View Related
Aug 26, 2015
I've inherited a table of members that has the following structure:
CREATE TABLE [dbo].[dimMember](
[dimMemberId] [int] IDENTITY(1,1) NOT NULL,
[dimSourceSystemId] [int] NOT NULL CONSTRAINT [DF_dimMember_dimSourceSystemId] DEFAULT ((-1)),
[MemberCode] [nvarchar](50) NOT NULL,
[FirstName] [nvarchar](250) NOT NULL,
[LastName] [nvarchar](250) NOT NULL,
[Code] ....
Based on the way the data loads into the table there's a possibility of some records being near duplicates of each other. For example, we can have a member that has records that have the same first name, last name, SSN, but different addresses, membercodes, subscribercode etc... This can happen in pretty much any variation thereof.
What I want to do, is add a new column and use that to group the similar records under based on comparing on several columns. By this I mean, if a member matches 4 of the 7 values below with another member, we would group these:
First Name (1st 3 characters)
Last Name
DOB
CurrentAddress1
MemberCode
SSN
SubscriberCode
I'm at a loss of how to structure the SQL to update the new column in the table.
View 9 Replies
View Related
Oct 3, 2013
here's my code (it has view so bear with me)
SELECT
ROW_NUMBER() OVER(ORDER BY SIGN_ON_DATE DESC) AS Row,
a.crew_no,
a.VESS_NAME,
a.VETY_DESCRIPTION,
a.POSI_ABBREVIATION,
CONVERT(VARCHAR, a.SIGN_ON_DATE, 103) AS SIGN_ON_DATE,
[code]....
So after that it will look like this
129361ATLANTA EXPRESS (ex Ludwigshafen Express)CONTAINERCHIEF COOK25/11/201209/06/20132012-11-25 00:00:00.000
229361KIEL EXPRESSCONTAINERCHIEF COOK01/02/201226/10/20122012-02-01 00:00:00.000
329361BONN EXPRESSCONTAINERCHIEF COOK04/04/201126/10/20112011-04-04 00:00:00.000
So what i want it is to select the last row and duplicate it to have 6 rows. So if it only has 2 output the last row will be duplicated 4 times and 3 times if the result is 3 times.
View 6 Replies
View Related
Jul 13, 2004
I want in my query to select a different field in case another one is null. in mysql i'd do it like this:
select
a
,if(b is null, c, b)
,d
from
alphabet
how can this be done in sql server?
thanks
View 2 Replies
View Related
Aug 4, 2015
I have a report that uses different datasets based on the year selected by a user.
I have a year_id parameter that sets a report variable named dataset_chosen. I have varified that these are working correctly together.
I have attempted populating table cell data to display from the chosen dataset. As yet to no avail.
How could I display data from the dataset a user selects via the year_id options?
View 4 Replies
View Related
Feb 11, 2004
I get a tabseparated textfile with data every friday. Faulty rows are to be returned to the source.
Double rows are considered a fault. How do I select all double rows?
I join the data later on with four columns so if these columns are alike the rows are considered identical even if other columns are not. Ie:
A, B, C, D, 12, 34, 48, 76
A, B, C, D, 23, 45, 56, 99
These two rows are considered alike since I join on A+B+C+D.
I'd like to select ALL double rows and insert them into a separate table that I can return to the source. Does anyone have an idea how to do this?
View 10 Replies
View Related
Mar 30, 2007
Can someone look at this and tell me where I went wrong? I'm trying to return all duplicate rows that have the same lastName and Address. It returns rows but they don't look like dups.SELECT TOP (100) PERCENT dbo.tblClient.LastName, dbo.tblClientAddresses.Address
FROM dbo.tblClient INNER JOIN
dbo.tblClientAddresses ON dbo.tblClient.Client_ID = dbo.tblClientAddresses.Client_ID
GROUP BY dbo.tblClient.LastName, dbo.tblClientAddresses.Address
HAVING (COUNT(dbo.tblClientAddresses.Address) > 1)
ORDER BY dbo.tblClientAddresses.Address
View 4 Replies
View Related
Mar 25, 2008
I have a table with four columns: id, value1, value2, and name. I need to select all duplicate rows with the same name in the name field. Once selected I need to average the value1 and value2 rows with each other. Then I would like to delete the duplicate rows and replace with the new averaged values. Should I first move the duplicate rows to a temp table and then average? Any help would be appreciated.
View 1 Replies
View Related
Aug 22, 2007
I have a requirement to mark duplicate records when I pull them from the database.
However, I only want to mark the 2nd, 3rd, 4th etc record - not the first one.
The code I have below creates a column called Dupes but marks all the duplicates - including the first one.
Is there a way to only mark the 2nd, 3rd, 4th etc record ?
SELECT *, cs.CallStatusDescription as CSRStatusDesc, cs2.CallStatusDescription as CustomerStatusDesc, (Select MAX(CallAttemptNumber)From CallResults cr Where cl.Id = cr.CallLogId) as CallAttemptNumber,
Dupes = (select count(id) from CallLogswhere (CustomerHomePhone != '' AND cl.CustomerHomePhone = CustomerHomePhone)OR (CustomerBusinessPhone != '' AND cl.CustomerBusinessPhone = CustomerBusinessPhone)AND DealerId= 'hdsh' AND CSRStatus IS NULLand datediff(d, logdate, getdate()) <= 21),
FROM CallLogs cl left Join CallStatus cs on cs.Id = cl.CSRstatusleft Join CallStatus cs2 on cs2.Id = cl.Customerstatus Where SaleStage IN ('1', '2', '3', '4', '5', '6') And (LogProcessFlag = 1 Or LogProcessFlag = 0)And DealerId='hdsh'And Logdate Between '08/01/2007' And '08/31/2007'
View 2 Replies
View Related
Sep 13, 1999
Hi..,
There r plenty of duplicate rows in the legacy system(Unix /Cobol) from which the data has to be migrated to SQL Server 7.0 Using DTS.Could u please help me in finding out all the repeating rows so that my people could go through it manually and make it unique rows. I expect a query that can be executed to select the repeating rows in a staging/temp table that contain all the rows from legacy system. If u could sujest any other alternative u r most welcome...
Thanks in advance..
View 2 Replies
View Related
Dec 19, 2007
Hi All,
Here is my story, how to change a column called Flag_Status based on the maximum Updated date. i.e. i want to make Flag_Status be 1 for the records which have maximum Updated_date (current record) and the rest to make it 0. for example accountID 1 has three records updated, but only one is current the rest are historical, thus i want the history record to be Falg_status 0 and the current record be 1. Note that Inserted_Date and Updated_Date are created using SSIS Derived column During loading the source table, it helps me when each record is inserted into the Data warehouse.
Here is My source table Name: Source_table,
CREATE TABLE dbo.Source_table
(
AccountID INT PRIMARY KEY,
Price int,
Address varchar(30),
added DATETIME DEFAULT GETDATE(),
edited DATETIME DEFAULT GETDATE(),
Flag_Status Int Default 1
)
GO
Here is the Fact_table
CREATE TABLE dbo.Fact_table
(
Fact_table_Key Int Identity (1, 1) NOT NULL,
AccountID INT,
Price INT,
Address varchar(30),
added DATETIME DEFAULT GETDATE(),
edited DATETIME DEFAULT GETDATE(),
editor VARCHAR(64),
Flag_Status Int Default 1,
Inserted_Date DATETIME DEFAULT GETDATE(),
Updated_Date DATETIME DEFAULT GETDATE()
)
GO
Source_table:
AccountID Price Address added edited Flag_Status
---------------- --------- ------------- ----------- ------------- ------------------
1 10 xyz 01-2006 01-2006 1
2 14 abc 02-2006 02-2006 1
3 13 mno 03-2006 03-2006 1
Here is the fact table, table name= Fact_table
Fact_table_Key AccountID Price Address added edited Flag_Status Inserted_Date Updated_Date
-------------------- ------------- --------- ------------ ------- --------- ---------------- ------------------ -------------------
1 1 10 xyz 01-2006 01-2006 1 05-2006 NULL
2 2 14 abc 02-2006 02-2006 1 05-2006 NULL
3 3 13 mno 03-2006 03-2006 1 05-2006 NULL
4 1 17 ght 01-2006 06-2006 1 NULL 08-2006
5 2 18 dmc 02-2006 07-2006 1 NULL 08-2006
6 3 20 kmc 03-2006 09-2006 1 NULL 10-2006
7 1 19 xyz 01-2006 11-2006 1 NULL 12-2006
8 2 19 klm 02-2006 01-2007 1 NULL 02-2007
9 3 21 pqr 03-2006 03-2007 1 NULL 04-2007
Here is what i am thinking: But it gives me Wrong Flag_Status.
UPDATE Fact_table
SET Flag_Status =
CASE
WHEN (SELECT Max(Updated_Date) From Fact_table
WHERE AccountID IN (SELECT AccountID FROM Fact_table
Group By AccountID Having Count(AccountID)>1)) >
(SELECT Max(edited) From Source_table
WHERE Flag_Status = 1)
THEN 1
WHEN (SELECT AccountID From Source_table
Group By AccountID
Having Count(AccountID) =1) =
(SELECT AccountID From Fact_table
WHERE Updated_Date IS NULL)
THEN 1
ELSE 0
END
View 12 Replies
View Related