Hi
Trying to figure out a fairly simple SQL query.
Basically i have two tables which have both a matching ID column. How ever, i need to find out which ID's are NOT present in BOTH the tables.
for example
table a -
id
12
13
14
15
table b -
id
12
14
15
Table 'a' has an id of 13 which is not in present in table 'b' and this is the value i need to select!
thanks in advance
I have a temp table like this
CREATE TABLE #Temp
(
ID int,
Source varchar(50),
Date datetime,
CID varchar(50),
Segments int,
Air_Date datetime,
[code]....
Getting Error
Msg 102, Level 15, State 1, Procedure PublishToDestination, Line 34 Incorrect syntax near 'd'.
For reasons that are not relevant (though I explain them below *), Iwant, for all my users whatever privelige level, an SP which createsand inserts into a temporary table and then another SP which reads anddrops the same temporary table.My users are not able to create dbo tables (eg dbo.tblTest), but arepermitted to create tables under their own user (eg MyUser.tblTest). Ihave found that I can achieve my aim by using code like this . . .SET @SQL = 'CREATE TABLE ' + @MyUserName + '.' + 'tblTest(tstIDDATETIME)'EXEC (@SQL)SET @SQL = 'INSERT INTO ' + @MyUserName + '.' + 'tblTest(tstID) VALUES(GETDATE())'EXEC (@SQL)This becomes exceptionally cumbersome for the complex INSERT & SELECTcode. I'm looking for a simpler way.Simplified down, I am looking for something like this . . .CREATE PROCEDURE dbo.TestInsert ASCREATE TABLE tblTest(tstID DATETIME)INSERT INTO tblTest(tstID) VALUES(GETDATE())GOCREATE PROCEDURE dbo.TestSelect ASSELECT * FROM tblTestDROP TABLE tblTestIn the above example, if the SPs are owned by dbo (as above), CREATETABLE & DROP TABLE use MyUser.tblTest while INSERT & SELECT usedbo.tblTest.If the SPs are owned by the user (eg MyUser.TestInsert), it workscorrectly (MyUser.tblTest is used throughout) but I would have to havea pair of SPs for each user.* I have MS Access ADP front end linked to a SQL Server database. Forreports with complex datasets, it times out. Therefore it suit mypurposes to create a temporary table first and then to open the reportbased on that temporary table.
View 6 Replies View RelatedIs there a method to convert "Select * From Table" to "Select field1,field2,...fieldn From Table" ?
Thanks
I need to write a select statement that take the upper table and select the lower table.
View 3 Replies View RelatedHello,
I hope someone can answer this, I'm not even sure where to start looking for documentation on this. The SQL query I'm referencing is included at the bottom of this post.
I have a query with 3 select statements joined together like tables. It works great, except for the fact that I need to declare a variable and make it a table within two of those 3. The example is below. You'll see that I have three select statements made into tables A, B, and C, and that table A has a variable @years, which is a table.
This works when I just run table A by itself, but when I execute the entire query, I get an error about the "declare" keyword, and then some other errors near the word "as" and the ")" character. These are some of those errors that I find pretty meaningless that just mean I've really thrown something off.
So, am I not allowed to declare a variable within these SELECT tables that I'm creating and joining?
Thanks in advance,
Andy
Select * from
(
declare @years table (years int);
insert into @years
select
CASE
WHEN month(getdate()) in (1) THEN year(getdate())-1
WHEN month(getdate()) in (2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12) THEN year(getdate())
END
select
u.fullname
, sum(tx.Dm_Time) LastMonthBillhours
, sum(tx.Dm_Time)/((select dm_billabledays from dm_billabledays where Dm_Month = Month(GetDate()))*8) lasmosbillingpercentage
from
Dm_TimeEntry tx
join
systemuserbase u
on
(tx.owninguser = u.systemuserid)
where
Month(tx.Dm_Date) = Month(getdate())-1
and
year(dm_date) = (select years from @years)
and tx.dm_billable = 1
group by u.fullname
) as A
left outer join
(select
u.FullName
, sum(tx.Dm_Time) Billhours
, ((sum(tx.Dm_Time))
/
((day(getdate()) * ((5.0)/(7.0))) * 8)) perc
from
Dm_TimeEntry tx
join
systemuserbase u
on
(tx.owninguser = u.systemuserid)
where
tx.Dm_Billable = '1'
and
month(tx.Dm_Date) = month(GetDate())
and
year(tx.Dm_Date) = year(GetDate())
group by u.fullname) as B
on
A.Fullname = B.Fullname
Left Outer Join
(
select
u.fullname
, sum(tx.Dm_Time) TwomosagoBillhours
, sum(tx.Dm_Time)/((select dm_billabledays from dm_billabledays where Dm_Month = Month(GetDate()))*8) twomosagobillingpercentage
from
Dm_TimeEntry tx
join
systemuserbase u
on
(tx.owninguser = u.systemuserid)
where
Month(tx.Dm_Date) = Month(getdate())-2
group by u.fullname
) as C
on
A.Fullname = C.Fullname
Hi,
i am facing a scenario is that, iam matching table one table form oracle and another table form sql
what is want is that using this two tables i want to display unmatched record from the orcale table
very urgent help me please send the code for this scenario
example
in sql table i have
fldinvoiceno
00000001
00000002
in oracle table i have
fldinvoiceno
00000001
00000002
00000003
so matching the two table i need to get 00000003
Hi,
I'm trying to create a resultset with the top 100 customers for the year (based on this year's sales) and for each of these customers, to return 5 top items and their corresponding sales dollars, as well as percentage of total sales achieved by each item. What I'm struggling with is how to return specifically 5 sales items per customer. If I use a temp table or a correlated subquery, what is the exact syntax to use? Any advice will be appreciated. Thanks all :)
I have tables in my database, tblNames1, tblNames2, tblNames3 for ex, and for addresses tblAddresses, can I match the address IDs in the names tables to the address table based on the values of a field? In this case CompanyName. Can they be matched automatically? My issue is that I have a huge CSV file with all the address information that needs to be assigned a foreign key based on the company name field which is also present in all the names tables, all the names are normalized.
View 1 Replies View RelatedI need to write a statement that returns the name, city, and state of each vendor that’s located in a unique city and state. In other words, I can not include vendors that have a city and state in common with another vendor.
Any help?
Thanks.
I have 4 rows below in file tblTEST, and I want to be able to transfer the CODE from the MAIN location to the INT location (replacing all existing "A" codes), preceeded by an "I".
ID LOC CODE
-- ----- ------
11 MAIN B
11 INT A
22 MAIN C
22 INT A
I want the result to be:
ID LOC CODE
-- ----- ------
11 MAIN B
11 INT IB
22 MAIN C
22 INT IC
I am stumped as to how to do this - any help or advice would be appreciated.
The only thing I've come up with is:
UPDATE S
SET s.code = B.code
FROM tbltest B
LEFT OUTER JOIN tbltest S ON B.id = S.id
WHERE (S.loc = 'INT')
But when I run it, it says "0 rows affected".
Hello All,
I have one table that contains information about invoices.
However I need to find out if invoice numbers have been used more than once.
I've tried to join the table to itself and find matching numbers, however I can't seem to get it to work properly.
Any help will be appreciated.
Thanks,
I need a script which will tell me Table name and column name where a given text is matching.
Example: search string = "I want to search something"
Output: Table T1 , Column C3.
DB: Microsoft SQL Server 2005 / 2008
Hello I am new to SSIS and learning as I go. Any guidance to my questions would be appreciated.
I wrote a script that takes the current date and subtracts a number of days/months from this date. I then attempted to use an SQL Task as a select with a parameter using the calculated date from the script. I was not successful in doing this. While performing searches on the WEB with the hopes of finding a solution I came upon the following text in the Microsoft forum under EXECUTE SQL TASK.
When you use an OLE DB Connection Manager, you cannot use parameterized subqueries because the Execute SQL task cannot derive parameter information through the OLE DB provider. However, you can use an expression to concatenate the parameter values into the query string and to set the SqlStatementSource property of the task.
Having come upon this statement I moved on to putting together an OLE DB SOURCE with a Flat File Destination. The SQL that I wrote is:
SELECT BP_ID, INVC_NBR, INVC_DT, BUS_ADD_DT
FROM DW.CUST_SALE_ADDR
WHERE (BUS_ADD_DT = ?)
The flat file destination was mainly used to confirm the select.
Having confirmed my select, I changed the select in the OLE DB SOURCE as follows:
DELETE FROM DW.CUST_SALE_ADDR
WHERE (BUS_ADD_DT = ?)
I also removed the Flat File Destination. Needless to say when I tried to run the package I did not get very far as a package validation error was encountered since there were no output columns.
Can you share how I should go about peforming the delete as described from the table based on a calculated date? And am I not understanding the comment regarding the SQL Statement and the use of parameters?
Thank you and God Bless.
I have a query that has the following structure
Select *
From Table
Where Condition And ... (some 'Exists' conditions)
When I run the query using field names the query gets much slower, and I cannot understand Why!
Select MyField
From Table
Where Condition And ... (some 'Exists' conditions)
I'm talking about three times slower using the Select MyField sintax.
Any ideas???
Let's say I have a list of IDs called EntryID and each EntryID can belong to ONE table out of a group of six, what is the best way to get a listing of these?
For example:
select r.*
from #Reminders r
left join mytable1 mt1 on (r.EntryID = mt1.EntryID)
left join mytable2 mt2 on (r.EntryID = mt2.EntryID)
left join mytable3 mt3 on (r.EntryID = mt3.EntryID)
left join mytable4 mt4 on (r.EntryID = mt4.EntryID)
As you can see, #Reminders has one field called EntryID (and many rows).
In my example above, only ONE of those tables will actually be able to join but I have no idea which one has the matching EntryID.
What is the best way for me to do this? I want to grab "ReportStatus" from the corresponding "mytable"... (each "mytable" has a ReportStatus column)
I have 3 table
table_A
table_B
table_C
TABLE_A
SNO NAME ID
1 RAJU 070491
2 VAMSHI 089767
3 ARUNA 068908
TABLE_B
SNO NAME ID
2 RAJU 070491
4 JKLKJ 098766
I WANT COMPARE TWO TABLES(TABLE_A & TABLE_B) SELECT TABLE_A MATCHING VALUES COPY IN TABLE_C
EX-
SNO NAME ID
1 RAJU 070491
Two tables:
table #1 = timestamp, servername1(never changes), value(int)
Table #2 = timestamp, servername2(never changes), value(int)
What I need to do is merge the two tables into a single table based on the matching timestamp:
timestamp, servername1, servername2 as headers then values under
"1/1/1-1:10:1" , "10" , "10" - as an example
"1/1/1-1:20:1" , "20" , "21" - as an example
"1/1/1-1:30:1" , "1" , "5" - as an example
Powershell or MSSQL 2008 queries work.
I have a powershell script atm that can create the table and then throw it back into the database but its very slow because of the amount of records.
The table is for some performance stat collection app.
Table #1 records a timestamp, the servername (which is the same over and over in the table) and the value of the performance object.
Table #2 is the same collection but for a different server.
The layout in the database is terrible but this is what I get to work with.
I have tables and a function as representated by the code below. The names for objects here are just for representation and not the actual names of objects. Table RDTEST may have one or multiple values for RD for each PID. So the function GIVERD will return one or multiple values of RD for each value of PID passed to it.
When I run the following query, I get the required result except the rows for CID 500 for which PID is NULL in table T1. I want the rows for CID 500 as well with PID values as NULL.
SELECT A.CID,
A.ANI,
A.PID,
B.RD
FROM T1 AS A CROSS APPLY GIVERD(A.PID) B
CREATE TABLE [DBO].[RDTEST](
[PID] [INT] NULL,
[RD] [INT] NULL
)
[Code] ....
I have set up a 'Parameters' table that solely stores all pre-assigned selection values for a webform. I customized a stored query to Select the values from the Parameters table. I set up the webform. The result is that the form1.apsx automatically populates each DropDownList task with the pre-assigned values from the 'Parameters' table (for example, the stored values in the 'Parameters' table 'Home', 'Business', and 'Other' populate the drop down list for 'Type').
The programming to move the selected data from form1.aspx to a new table in the SQL database perplexes me. If possible, I would like to use the form1.aspx to Postback (or Insert) the "selected" data to a *new* column in a *new* table (such as writing the data to the 'CustomerType' column in the 'Customers' table; I clearly do not want to write back to the 'Parameters' table). Any help to get over this hurdle would be deeply appreciated.
I have the following data
MASTER
id
name
DETAIL
id
master_id
name
I want a perform a query where i can get all the rows of the master table which have no relationed rows in detail table.
How can I do that???
I have two table with some identical fields and I am trying to populate one of the tables with a row that has been selected from the other table.Is there some standard code that I can use to take the selected row and input the data into the appropriate fields in the other table?
View 3 Replies View RelatedI have two tables with the common column-name/ The first one include such columns as the name of football team, its country and budget. The second one include the team name, victories (quantity of it), lost games, and season. So I have the task to select such column as name, victories, lost games in 2nd table but only that ones that has budget over 1 mln? How to build select statement SELECT name, victories, lost g/ from TABLE2 WHERE budget >1000000 from TABLE1? Or should I equates the table1.name=table2.name??
View 6 Replies View RelatedI am trying to pull a min value of a date column from table 1, if table 1 does not have any record I need pull a date column from table 2. Table 2 will always have a unique record ID (No duplicate ID's).
Table 1
ID date
1 1/1/2014
1 1/5/2014
Table 2
ID date
1 1/5/2014
2 10/15/2014
Here is the desired result when running for ID = 1 (select Min(date) where ID = 1, I should be getting 1/1/2014 from Table 1.
If I am running the same query where ID=2 then I should be getting 10/15/2014 from Table 2. So basically I need to check if a value exists on Table 1 first, if there is no value on Table 1 and then to grab the value from Table 2.
I've been scratching my head over this one.
It should be pretty easy to do, but I keep going over the same problem.
I have 3 tables (Suppliers, Categories & Suppliers_To_Categories).
Suppliers_To_Categories contains which suppliers are related to which categories.
The set-up is so (simplified):
Suppliers
id
1 Supplier 1
2 Supplier 2
3 Supplier 3
4 Supplier 4
Categories
id
1 Category A
2 Category B
3 Category C
4 Category D
Suppliers_To_Categories
id supplierId categoryId
1 1 1
1 1 2
1 1 3
2 2 3
3 3 1
3 3 3
What I am after is an SQL statement which tells me for a particular category, which suppliers ARE NOT related to it, so they can be assigned.
E.g.
Category D has Suppliers 1-4 unassigned
Category C has Supplier 4 unassigned
Category B has 2, 3, 4 unassigned
Category A has Supplier 2, 4 unassigned etc...
I've got the other side of the SQL statement which tells me which suppliers are assigned to a category (see below):
SELECT Suppliers.*
FROM CatToSupplier INNER JOIN
Suppliers ON CatToSupplier.supplierId = Suppliers.supplierId
WHERE (CatToSupplier.CatId = @CatId)
This is probably really easy, but I've become unstuck!
I'm trying to clean up a database design and I'm in a situation to where two tables need a FK but since it didn't exist before there are orphaned records.
Tables are:
Brokers and it's PK is BID
The 2nd table is Broker_Rates which also has a BID table.
I'm trying to figure out a t-sql statement that will parse through all the recrods in the Broker_Rates table and delete the record if there isn't a match for the BID record in the brokers table.
I know this isn't correct syntax but should hopefully clear up what I'm asking
DELETE FROM Broker_Rates
WHERE (Broker_Rates.BID <> Broker.BID)
Thanks
Hello,Using SQL Server 2000, I'm trying to put together a query that willtell me the following information about a view:The View NameThe names of the View's columnsThe names of the source tables used in the viewThe names of the columns that are used from the source tablesBorrowing code from the VIEW_COLUMN_USAGE view, I've got the codebelow, which gives me the View Name, Source Table Name, and SourceColumn Name. And I can easily enough get the View columns from thesyscolumns table. The problem is that I haven't figured out how tolink a source column name to a view column name. Any help would beappreciated.Garyselectv_obj.name as ViewName,t_obj.name as SourceTable,t_col.name as SourceColumnfromsysobjects t_obj,sysobjects v_obj,sysdepends dep,syscolumns t_colwherev_obj.xtype = 'V'and dep.id = v_obj.idand dep.depid = t_obj.idand t_obj.id = t_col.idand dep.depnumber = t_col.colidorder byv_obj.name,t_obj.name,t_col.name
View 2 Replies View RelatedI have an automatic data collection system. The large majority of the time, all data is electronically gathered. On occasion, the need arises to substitute a manually entered value into the data when a valuable piece of information cannot be electronically secured. When a piece of data is open to substitution, it arrives with a value of -9999 (a value not naturally occuring) in Table A. I want to be able to use a trigger on table A to get its substitution value from a corresponding column (Same name) in Table B. Tables A & B will have an identical schema. A is raw data, B is the manually updated table. Any value in the raw table with the content of -9999 gets its replacement from Table B.
I'm open to any ideas!!
RC =:((
I have two tables with a 1-many relationship. I want to write aselect statement that looks in the table w/many records and comparesit to the records in the primary table to see if there are any recordsthat do not match based on a certain field.Here is how my tables are setup:Task Code TableTCode,TCodeFName,ActiveTracking Table(multiple records)ID,User,ProjectCode,TCode,Hours,DateI want to look at the tracking table and see if there are any TCodelisted here that are not listed in the Task Code table.How do I write a SQL statement to do this?
View 6 Replies View Related I have the following script below which checks my employee table for duplicate employees based on surname, forename, dateofbirth and NINumber and inserts the duplicates into a temp table i.e. @temptable. I now want to change how NINumber is matched. For example i want to now say:
match on the 1st 8 characters of NI Number where the NI Number does not start with TN.
For NI Numbers that start with TN match on all 9 chars.
Can anyone help with the syntax?
code is as follows:
DECLARE @temptable table(f_id int primary key identity(1,1), NhssNumber int, Surname varchar(18), Forename varchar(11), DateOfBirth datetime, NINumber varchar(9), MaxNhssNumber int)
INSERT INTO @temptable
SELECT
a.NhssNumber,
CAST(a.Surname as varchar(18)) as Surname,
CAST(a.Forename as varchar(11)) as Forename,
CONVERT(char(8),a.DateOfBirth,112) as DateOfBirth,
CAST(a.NINumber as varchar(9)) as NINumber, NULL
FROM dbo.t_Employee a
JOIN
(SELECT Surname, Forename,DateOfBirth,NINumber
FROM dbo.t_Employee
GROUP BY Surname, Forename,DateOfBirth,NiNumber
HAVING COUNT(*) > 1) b
ON a.Surname = b.Surname
AND a.Forename = b.Forename
AND a.DateOfBirth = b.DateOfBirth
AND a.NiNumber = b.NiNumber
ORDER BY a.Surname, a.Forename,a.DateOfBirth,a.NiNumber
select * from @temptable
The LIKE keyword in SELECT WHERE can use wildcard
%
Any string of zero or more characters.
_
Any single character.
but how to Pattern Matching for "zero or single character"?
I am unable to the access on table even after providing the SELECT permission on table.
Used Query by me :
Here Test is schema ; Card is table ; User is Satish
To grant select on Table
GRANT SELECT ON TEST.Card TO satish
Even after this it is not working, So provided select on schema also.
used query : GRANT SELECT ON SCHEMA::TEST TO Satish.
For example,I have a table "authors" with a column "author_name",and it has three value "Anne Ringer,Ann Dull,Johnson White".Here I want to create a new table by using a select sentence,its columns come from the values of the column "author_name".
can you tell me how can I complete this with the SQL?