I have one table with primary key index, when i want to select the result from this particular table, i wish the result arrange by record inserted squence and not by the primary key i had been set.
View 4 RepliesIn select query, how can i limit sequence upto 5 and get result like below?
Rec_ID CompanySequence#
123ABC11
124ABC22
125ABC33
126ABC44
127ABC55
[Code] .....
Can an INSERT statement also return all columns inserted as a result set? If so what clause of the INSERT statement does this?
View 3 Replies View RelatedI want to make a query with the result like this, where Seqno is the result query which has repeating sequence number for same Field1
Field1Field2SeqNo
BVFUSBVFUS011
BVFUSBVFUS021
BVFUSBVFUS031
BVFRPBVFRP012
BVFRPBVFRP022
[Code] ....
I want the result also no ordered by Field1. it just as the natural order of the table..
Can an INSERT statement also return all columns inserted as a result set? If so what clause of the INSERT statement does this?
View 2 Replies View Related
I have an Execute SQL Task that executes "select count(*) as Row_Count from xyztable" from an Oracle Server. I'm trying to assign the result to a variable. However when I try to execute I get an error:
[Execute SQL Task] Error: An error occurred while assigning a value to variable "RowCount": "Unsupported data type on result set binding Row_Count.".
Which data type should I use for the variable, RowCount? I've tried Int16, Int32, Int64.
Thanks!
I was thinking that this question probably comes up a lot...but my forum searches didn't turn anything up, so here goes:
I have an id field that auto increments (identity) for each record.
I insert a record.
How can I safely extract the id field of the record for use in another query, avoiding the possiblity that another record is inserted before I can get at it?
Thanks,
G
When I run query in excel it gives result with different column sequence. The same query gives result with different column sequence when used in query analyzer or VBA Macro. E.g., Select * from ABC.
result in Excel 2003 SQL OLE DB query
col-A col-B col-C
values...
Result with Query Analyzer and VBA Macro
col-c col-B col-A
values...
Hi,
Check this SQL
SELECT DISTINCT
TblOrder.CustomerUID,
TblOrder.OrderHiddenID,
TblPayment.PaymentAmount,
TblPayment.Result,
TblOrder.OrderID
FROM TblOrder
CROSS JOIN TblPayment
WHERE (TblOrder.CustomerUID = @IsCustomerID)
AND (TblOrder.OrderHiddenID = @IsHiddenID)
AND (TblPayment.Result = 'Pending')
AND (TblOrder.OrderID IN (SELECT MAX(TblOrder2.OrderID) FROM TblOrder TblOrder2))
one customer can have more than one orders.
So i need to select customer last inserted order details from database.So when i use above sql i returns null.what might be the reason for this
<g class="gr_ gr_54 gr-alert gr_gramm Grammar multiReplace" data-gr-id="54" id="54">I want</g> to get row number of last inserted into employee table?
How can i get it @@identity function returns null.
is there any way to do it?
When I run simple select against my view in Query Analyzer, I get result set in one sort order. The sort order differs, when I BCP the same view. Using third technique i.e. Select Into, I have observed the sort order is again different in the resulting table. My question is what is the difference in mechanisim of query analyzer, bcp, and select into.
Thanks
I have the following table:
Policy Sequence LossDate Description Amt
123 1 9-1-2012 property 100
123 2 10-1-2012 property 200
345 1 9-1-2012 property 100
345 2 10-1-2012 property 100
678 1 9-1-2012 property 100
I want to select the data as follows:
Policy LossDate1 Description1 Amt1 LossDate2 Description2 Amt2
123 9-1-2012 property 100 10-1-2012 property 200
345 9-1-2012 property 100 10-1-2012 property 100
678 9-1-2012 property 100 NULL NULL NULL
Is there a way to do this using T-SQL?
The max sequence number can vary, so far the max has been 12, but may be higher in the future.
hi
I want to do a "bulk" insert and then get the id (primary key) of the inseret rows:
insert into table1 select * from table2
If I get the value of the @@identity, I always get the last inserted record.
Any idea how to get the ids of all inserted values?
Thx
Olivier
Hi all!In a insert-trigger I have two joins on the table named inserted.Obviously this construction gives a name collition beetween the twojoins (since both joins starts from the same table)Ofcourse I thougt the usingbla JOIN bla ON bla bla bla AS a_different_name would work, but itdoes not. Is there a nice solution to this problem?Any help appriciated
View 1 Replies View Relatedis there any way of getting the identity without using the "@@idemtity" in sql??? I'm trying to use the inserted event of ObjectDataSource, with Outputparameters, can anybody help me???
View 1 Replies View RelatedIn the database i have a table with this information:key_id =1key_desc =43+34+22+12I want sum the values in key_desc. Something like:SELECT key_desc FROM tableBut the result of the select was "111" and not "43+34+22+12".Is this posible?
View 6 Replies View RelatedHi there,
Problem:
Having an old webapplication with dynamic build sql queries. Now the database changed completly because of new db model. Queries are getting much more complex now, so i put them into stored procedures.
Now i want to work with the data in an application for sorting an filtering. All the 'WHERE' conditions are build dynamic within the code. For not modifying the whole application i would like to do something like:
SELECT * FROM (EXECUTE sp_someprocedure) WHERE X = 1
Is there a way to realize this ?
Thx for helping
hey there
I have parameters in my report set up
CallStatus = string
Available Values are non-queried and values are listed in the value list
closed, open, pending, select all
If I choose each one separately I get a result - if I choose select all I get no result.
This worked fine attaching to another datasource - I have now attached it to a new source.
Tried altering the relationship to properties to a left outer join but this made no difference.
Can someone tell me what else I should check?
thanks
Hi,
I ran a sql somedays ago it gave me result, I ran the same sql today it gave different result. The only difference is that the particular table in the sql is frequently used table with lots of new insert. But the sql I ran is not selecting the new rows, it only deals with already inserted records.
Any idea what will make the sql to give different result from same set of records in different time.
Thanks
John Jayaseelan
Let's say I have a simple query to return the results of my "Status" table. The query reads as follows:
Code:
Select statusID, statusName
From Status
Here is the result set that I am returned:
Code:
22 Associate Member
23 Is Not Paying
24 Exempt
25 Fair Share
26 Member
29 Retiree
30 Staff
32 Fair Share - Self Pay
34 Member - Self Pay
Now, I am using this query for reporting purposes and would like to inject some additional sql that will append one additional row to my result set -- this is what I am calling the 'static' row in the thread title.
In other words, without modifying my database I would like to return the above set of data but with one additional row that has an arbitrary ID with the name "Unknown" or something similar.
again, I want to avoid adding an "Unknown" field directly to my database -- is their any way to "hard code" the selection of this row in my sequal?
Thanks,
Zoop
Eliko writes "i would like to add a coloumn to a select result, so there will be another coloumn with indexed running numbers for each record.
how can i do it?
thank you
eliko"
Hi, I execute a select statement
SELECT COUNT(*) FROM TABLEA WHERE DTRECORD < '1-MARCH-2008'
every times I execute it I get different result.
1st result : 17036986
2nd result : 17037903
3rd result : 17038309
Any idea??? There is no any inserting on TABLEA, so it should not has changes. Is that because of statistic is still updating?? I don't have much knowledge on this so I cannot sure the cause of the problem. Please advise.
Can we select "last 10 rows" from the result set. (sql server 2000)
Something of an opposite of "top" functionality
Hi,I have this code following my signature to SELECT a number.I don't know what am I missing, because it always return the number which the variable banID was initialized (32 in this case).The strangest thing is that if I run the statement inside MS SQL SERVER, I get the right result.Any help would be appreciated.Warm Regards,Mário Gamito--// Get inserted user IDint banID = 32 ;SqlConnection myConn = new SqlConnection("Data Source=192.168.1.6; Initial Catalog=db1; User=sa; Password=secret");try{myConn.Open()}catch (Exception e){Console.WriteLine(e.ToString());}try{SqlCommand myCommand = new SqlCommand("SELECT MAX(PublisherID) FROM table1", myConn);banID = Convert.ToInt32(myCommand.ExecuteScalar);}catch (Exception e){ Console.WriteLine(e.ToString());}Response.Write(banID);
View 3 Replies View RelatedHi AllI hope some1 with more experience of Sql Server 2000 Stored proc's can help me or point me to somewhere I can find the info cos at the moment it's doing my head in, I have spent 2 day,s so far trying to solve the following query, the problem is I do not understand the errors I am getting or why so here is the code that won't work
ALTER PROCEDURE dbo.UpdateStock
@OrderID intASSELECT (dbo.Products.Stock - dbo.OrderDetails.Quantity) AS NewStockFROM dbo.OrderDetails INNER JOIN dbo.Products ON dbo.OrderDetails.ProductID = dbo.Products.ProductIDWHERE (dbo.OrderDetails.OrderID = @OrderID) UPDATE dbo.Products SET dbo.Products.Stock = NewStockWhat I am trying to do is get the OrderDetails.Quantity form the OrderDetails table the UPDATE the Stock feild in the Products Table by deducting the OrderDetails.Quantity From the Products.Stock to give me the new stock levelWell it works to an extent in that if I do this to SET dbo.Products.Stock = 10 it will put 10 in the Stock feild but I am unabke to get the value of NewStock , which caluculates the correct value into the set statment I keep getting invalid colum name, I have tried any combination I can think of but I still get error of 1 sort or another.So if any1 could help as I am pulling my hair out with this 1So perhaps some1 could cast there eye over it pleaseThanks
I want to export the data from a database and place it on a csv file to be imported to another database. However, I want some columns from the selected data (result of select statement) to be encrypted. What should I do? Is this possible? How do you decrypt the data during import?
The original data is from an MS SQL database to be transferred to a PostgreSQL database.
MS SQL ----- CSV (some columns are encrypted) ---- PostgreSQL (all columns decrypted)
I posted the same question on the mysql category. I wanted to delete it since I just realized today that I posted it on the wrong category but seems like there is no way I can delete.
I want to SELECT the result from table, but i want the result return in record entry order, instead of sort by index or ORDER BY certain field.
View 14 Replies View RelatedI have the select statement below - where I use some external functions - and I would like the result to be saved to another table.After executing the statement I end up with a table containing the following columns:
accountno
d.date_start
d.date_end
TWRR_Month
TWRR_Cum
Normally I would use the command 'INTO TableName' but since the statement is so long I don´t know where to place it.The select statement is as follows:
IF OBJECT_ID('tempdb..#trn') IS NOT NULL
DROP TABLE #trn
IF OBJECT_ID('tempdb..#mv') IS NOT NULL
DROP TABLE #mv
SELECT PTR_sequence as trno, PTR_CLIENTACCOUNTNUMBER as accountno, PTR_DATE as date_trn,
CASE PTR_TAC
WHEN 'BUY' THEN 0
ELSE PTR_LOCALAMT
END as amt_trn
[code]...
Hi this is probably a very stupid question, but I still need to know.
How do I set the result of a 'SELECT' statement to a variable? I know I can use CURSOR, but I am certain the SELECT statement will return either 1 record or NULL. Can I use something else apart from CURSOR?
I have a function that is designed to return a variable that containsconcatenated values from a partinular field in the returned rows:DECLARE @output varchar(8000)SELECT@output =CASEWHEN @output IS NULL THEN CAST(TSD.ScheduledTime ASvarchar(4))ELSE @output+ ', '+ ISNULL(CAST(TSD.ScheduledTime ASvarchar(4)),'')ENDFROM TSDWHERE ClientGUID = 2000001447020001 ANDParentGUID = 6000006684068001Select @outputThe variable returned with this code contains:"1200, 1400, 1200, 1400"I want to only get the unique values so that the variable returns "1200,1400". Seems simple enough just to add DISTINCT to the SELECT statement.However, what is returned is simply "1400".I cannot figure out why that is the case. Is there any explanation to thisresult?Side note: I can work around this by using a cursor but I would like toknow why DISTINCT does not work.Many thanks in advance for any help that can be provided!Pat
View 5 Replies View RelatedHI, I'm a simple store procedure that returns a result such as this one:
AM
AM-1
AM-2
AM-n
and in other store procedure I need to filter result from this list.
I think that some query like this is impossibile
select fields from table where id in (execute sp)
how can I make this?
Thanks a lot.
hello
Does anybody know how to store the result of a select top 1 into a variable??
I have this code:
Select @status = Select top 1 status from venta where Origin ='Pedido Autos nuevos' order by fdate desc
And also this:
Select @status = top 1 status from venta where Origin ='Pedido Autos nuevos' order by fdate desc
But none of them work
Any ideas??
Thanks
Hi
I have a table as follows
Table Cats
{
catergory varchar(20)
Update datetime
}
And the data in the table is as follows
Category Update
------------- --------------
cat1 d1
cat2 d2
cat3 d3
I would like to get only 'Category' in result set and work on it ( similar to foreach in C# )
select Category from Cats will return the required result , but how can i iterate thru then in T-Sql
Can any one please throw some light
Thank you
~Mohan Babu