SELECT Statement With Two Retrieved Columns Originating From The Same Dbase Fields
Jul 20, 2006
Hello,
I've been busy all night searching and reading trying to figure out how I can do the following.
I have a table that tracks user IDs in multiple fields. When I select
records from this table I need a way to resolve those ID fields back
into user names by referencing the users table. SQL statement thus
far...
SELECT A.Username as NameA, B.Username As NameB, FROM theTable, Users As A, Users As B WHERE theTable.UserIDA ???
How do I resolve theTable.UserIDA and theTable.UserIDB back to
Users.Username so that the records returned fill the fields NameA and
NameB?
Your help is greatly appreciated.
Thanks,
-Mike
View 5 Replies
ADVERTISEMENT
Jul 19, 2006
Hello,
I've been busy all night searching and reading trying to figure out how I can do the following.
I have a table that tracks user IDs in multiple fields. When I select records from this table I need a way to resolve those ID fields back into user names by referencing the users table. SQL statement thus far...
SELECT A.Username as NameA, B.Username As NameB, FROM theTable, Users As A, Users As B WHERE theTable.UserIDA ???
How do I resolve theTable.UserIDA and theTable.UserIDB back to Users.Username so that the records returned fill the fields NameA and NameB?
Your help is greatly appreciated.
Thanks,
-Mike
Ontario, Canada
View 5 Replies
View Related
Mar 15, 2004
I am trying to do this in MS Access actually but it is an SQL question.
This query:
SELECT LoanNo, COUNT(LoanNo) AS 'Count'
FROM DedupTest031504
GROUP BY LoanNo
HAVING COUNT(LoanNo) > 1;
returns:
LoanNo Count
46690128 2
46861821 2
47762138 3
47762154 3
48257239 2
48257663 2
48257719 2
48258143 2
48258167 2
which is correct but how do you SUM the COUNT field? In other words, I want the total number of duplicate records in the table. Is there another way alltogether?
I tried:
SELECT LoanNo, SUM(COUNT(LoanNo))
FROM DedupTest031504
GROUP BY LoanNo
HAVING COUNT(LoanNo) > 1;
but I get a "CANNOT HAVE AGGREGATE FUNCTION IN 'SUM(COUNT(LoanNo))' error.
Thanks.
ddave
View 12 Replies
View Related
Jul 14, 1999
An ADODB error spawn everytime I query more than 15 fields in a specific SQL Table. My sql statement is something like this:
set rs=server.createobject("ADODB.Recordset")
rs.open "select * from mytbl",application("mycon"),1,3
And the error is something like this:
"you can't query more than the maximum field "
View 1 Replies
View Related
Oct 31, 2006
The data I have has a 1 in for each Yes answer and a 2 for each no answer. I just want the select statement to show the word yes when there's a 1 and the word no when there's a 2. I don't need to update or change the database. Could anyone lead me in the right direction here? Thanks
View 4 Replies
View Related
Oct 23, 2005
Hi,Is there a way to exclude fields in a query other than just includingthe ones you want. If there are 20 fields and you want to see all but3, it would be a lot easier to exclude the 3.Thanks
View 8 Replies
View Related
Jan 9, 2008
I thought this was working, but apparently it was not. I was wondering how I would create a SELECT Statement for values that are blank (Equal to ""). I really could have swore that this was working, but I guess it wasn't.
Here is my code:
Code Block
try
{
string conString = @"Provider=Microsoft.ACE.OLEDB.12.0;Data Source=" + Environment.CurrentDirectory + @"MyDB.accdb;Jet OLEDB:Database Password=MyPassword;";
// create an open the connection
OleDbConnection conn = new OleDbConnection(conString);
OleDbCommand command = new OleDbCommand();
command = conn.CreateCommand();
// create the DataSet
DataSet ds = new DataSet();
// run the query
command.CommandText = "SELECT ID AS [#], Company AS [Company], FName AS [First Name], LName AS [Last Name], Type AS [Type] FROM Table1 WHERE Tags = @P0;";
OleDbDataAdapter adapter = new OleDbDataAdapter();
adapter = new OleDbDataAdapter(command);
command.Parameters.Add("@P0", OleDbType.VarChar).Value = "";
adapter.Fill(ds);
// close the connection
conn.Close();
bindingSource1.DataSource = ds.Tables[0];
DataGridView.DataSource = bindingSource1;
// set the size of the dataGridView Columns
this.DataGridView.Columns[0].Visible = false;
this.DataGridView.Columns[1].Width = 234;
this.DataGridView.Columns[2].Width = 50;
this.DataGridView.Columns[3].Width = 50;
this.DataGridView.Columns[4].Width = 75;
//Sort on the Title Column
DataGridViewColumn sortColumn = DataGridView.Columns[1];
ListSortDirection direction;
direction = ListSortDirection.Ascending;
DataGridView.Sort(sortColumn, direction);
//Set the Selected Property of the First Row to False
DataGridView.Rows[0].Selected = false;
}
catch
{
}
Thank you again for your help.
View 8 Replies
View Related
Jan 1, 2007
Is it possible to combine fields and text in a select statement?
In a dropDownList I want to show a combination of two different fields, and have the value of the selected item come from a third field. So, I thought I could maybe do something like this:
SELECT DISTINCT GRP AS GroupName, "Year: " + YEAR + "Grade: " + GRD AS ShowMe
FROM GE_Data
WHERE (DIST = @DIST)
I hoped that would take the values in YEAR and GRD and concatenate them with the other text. Then my dropDownList could show the ShowMe value and have the GroupName as the value it passes on. However, when I test this in the VS Query Builder, it says that Year and Grade are unknown column names and changes the double-quotes to square brackets.
If this is possible, or there's a better way to do it, I'd love some more info.
Thanks!
-Mathminded
View 7 Replies
View Related
Oct 17, 2004
Dear All
I am trying to populate an OledbDatareader for binding to a ASP datagrid.
For this I use select statement to display combined fields in a datagrid cell.
Eg. Select (Field1+ '<br/>' + Field2 + '<br/>' + Field 3) As Address .. and so on.
But the problem is if any of the three field is null the combined field 'Address' returns as Null.
Please help me to overcome this problem.
Regards
kalanad ( beginner)
View 12 Replies
View Related
Sep 29, 2005
Hi to allI wish to be able to have a standard select statement which hasadditional fields added to it at run-time based on suppliedparameter(s).iedeclare @theTest1 nvarchar(10)set @theTest1='TRUE'declare @theTest2 nvarchar(10)set @theTest2='TRUE'selectp_full_nameif @theTest1='TRUE'BEGINother field1,ENDif @theTest2='TRUE'BEGINother field2ENDfrom dbo.tbl_GIS_personwhere record_id < 20I do not wish to use an IF statement to test the parameter for acondition and then repeat the entire select statement particularly asit is a UNIONed query for three different statementiedeclare @theTest1 nvarchar(10)set @theTest1='TRUE'declare @theTest2 nvarchar(10)set @theTest2='TRUE'if @theTest1='TRUE' AND @theTest2='TRUE'BEGINselectp_full_name,other field1,other field2from dbo.tbl_GIS_personwhere record_id < 20ENDif @theTest1='TRUE' AND @theTest2='FALSE'BEGINselectp_full_name,other field1from dbo.tbl_GIS_personwhere record_id < 20END......if @theTest<>'TRUE'BEGINselectp_full_namefrom dbo.tbl_GIS_personwhere record_id < 20ENDMake sense? So the select is standard in the most part but with smallvariations depending on the user's choice. I want to avoid risk ofbreakage by having only one spot that the FROM, JOIN and WHEREstatements need to be defined.The query will end up being used in an XML template query.Any help would be much appreciatedRegardsGIS Analyst
View 2 Replies
View Related
Jan 21, 2008
Hi,
I have a report with 5 filters which can be applied to it. The records are grouped by the Rotation programme there are on, with a subtotal for each unique programme name.
The report seems to work fine, but upon closer inspection - we noticed that 2 of the records are not being displayed. As a result, the total count is out by 2.
We tracked down the missing records so I ran the SQL query with a Where clause, and it was able to find the two records.
What could possibly cause this behaviour? Please see included SQL statement :
Code Block
SELECT Posts.PostNumber,COUNT(Posts.PostNumber) AS RPCount, Incumbents.Name AS IncumbentName, Grades.GradeTitle, Specialties.SpecialtyTitle,
Hospitals.Name AS Hospital, Genders.Gender, [Incumbent History].YearGraduated, COUNT([University Origins].Origin) AS OriginCount,
Incumbents.Nationality AS NationalityID, Countries.[Country Name] AS Nationality, [Rotation Programmes].[Programme Name],
Posts.[Post Approved for Training], [University Origins].Origin, Posts.OldPostNumber, [Rotation Programmes].[Programme ID]
FROM Posts INNER JOIN
Incumbents ON Posts.PostNumber = Incumbents.PostNumber INNER JOIN
[Incumbent History] ON Incumbents.[Incumbent ID] = [Incumbent History].IncumbentID INNER JOIN
Grades ON Incumbents.[Official Grade] = Grades.GradeID INNER JOIN
Specialties ON Posts.Specialty = Specialties.SpecialtyID INNER JOIN
Hospitals ON Posts.HospitalID = Hospitals.[Hospital ID] INNER JOIN
Genders ON Incumbents.GenderID = Genders.GenderID INNER JOIN
Countries ON Incumbents.[Country Of Birth] = Countries.[Country ID] INNER JOIN
[Rotation Programmes] ON Posts.[Rotation Programme] = [Rotation Programmes].[Programme ID] INNER JOIN
[University Origins] ON [University Origins].[Uni Origin ID] = Incumbents.[University Origin]
GROUP BY [Rotation Programmes].[Programme Name], Posts.PostNumber, Incumbents.Name, Grades.GradeTitle, Hospitals.Name, Genders.Gender,
[Incumbent History].YearGraduated, [University Origins].Origin, Incumbents.Nationality, Countries.[Country Name], [University Origins].Origin,
Posts.[Post Approved for Training], Posts.OldPostNumber, Specialties.SpecialtyTitle, [Rotation Programmes].[Programme ID]
View 12 Replies
View Related
Apr 28, 2004
Afer I am getting a DataSet from SELECT* statement I would like to know the value of each field
How do I do that?
View 1 Replies
View Related
Oct 7, 2004
Can you please tell me, is it possible to Trim the columns in a select statement:
select eventid,referenceno,EventDesciption,modulename,moduleid,created_by,CONVERT(varchar(10),eventdate,101) as eventdate from MYTable
Thank you very much.
View 1 Replies
View Related
Feb 18, 2005
Maybe its a friday, but I can't figure out how to total the returned results so I just get a sum of the 'Items' and 'Total'. I thought it was Compute but that did not work!
I'm pulling data from 2 tables, Order and Order_Item and what Im trying to achieve is to total up how many items were sold and the total. Each one of the rows below are for each order.
I must be doing something wrong, can anyone help?
SELECTsum(Order_Item.Quantity) as Items,
sum(Order_Item.Price*Order_Item.Quantity)-[Order].Discount as Total
FROM[Order]
JOINOrder_Item ON Order_Item.[OrderID] = [Order].[ID]
GROUP BY[Order].[ID],
[Order].OrderRef,
[Order].CustomerID,
[Order].ReceivedDate,
[Order].Postage,
[Order].Discount
ORDER BY [Order].ReceivedDate DESC
Items Total
==== =====
114.9900
113.5920
333.6750
227.1840
567.9600
View 3 Replies
View Related
Jan 23, 2015
I am retrieving some data from Invoices, Customers and Companies tables as follows, but would like to make the customerName and the Companies.Name as single column such Name and similarly for customerID/companyID and customerCode/companyCode.
Code:
with cte
as
(
selectdistinct i.invoiceNumber, itemID, customers.customerID, Companies.companyID
,SUM(net_weight) as totalWeight, rate
,(select SUM(net_weight) * rate) as amount
[code]....
View 6 Replies
View Related
Jan 30, 2008
Hi!
I have a select question that look like this:
DECLARE @ID uniqueidentifier;
SET @ID = '40bd3052-60f4-414a-99df-ca882c128493';
SELECT
rp.ID AS ReportPackId
,rp.SupplierPartyIdentifier AS SupplierPartyIdentifier
,rpap.AdditionalPartyIdentifier AS AdditionalPartyIdentifier
FROM
ReportPack rp
INNER JOIN ReportPackAdditionalParty rpap
ON rpap.fk_ReportPack = rp.ID
WHERE rp.ID = @ID
The result a get when running the select question is:
ReportPackId
SupplierPartyIdentifier
AdditionalPartyIdentifier
40BD3052-60F4-414A-99DF-CA882C128493
String
addPartyId1
40BD3052-60F4-414A-99DF-CA882C128493
String
addPartyId2
My problem is that the result I want is the following:
ReportPackId
SupplierPartyIdentifier
AdditionalPartyIdentifier
AdditionalPartyIdentifier
40BD3052-60F4-414A-99DF-CA882C128493
String
addPartyId1
addPartyId2
I always know that the ReportPackId and SupplierPartyIdentifier will be identical for all rows because of the Where condition, and therefore I want all AdditionalPartyIdentifiers to be in columns instead of a new row. Is this possible?
View 5 Replies
View Related
Nov 12, 2007
Does tsql allow sth like
Select col1*col2 as ComputedColumn, ComputedColumn + 2 as NewColumn
From T_Table
THis is possible in Access.
View 5 Replies
View Related
Oct 9, 2007
I'm wondering if there is a single statement I can write to pull my data. Let's say my Order table has one field for userId and one field for supervisorId (among other fields) both of which are foreign keys into the Users table where their name, address, etc. are stored. What I'd like to do is to pull all the rows from Order and have a join that pulls the user name and supervisor name from the User table all in one go. Right now I pull all the Orders with just user name joined, and then go back over the objects to add the supervisor name as a separate query.
The reason I'd like to do this is to simplify the objects I'm passing to the GridView by doing a single fetch instead of multiples. I'm using SQL Server, .NET 2.0 and VS.NET 2005.
Thanks
View 1 Replies
View Related
Feb 8, 2006
Hi all,Is this at all possible? In the following query I have mutiple columns in my SELECT statement that each have their own alias. Is it possible that I can use just one Alias for all these columns (such as Address), and if so how is it done?SELECT RTRIM(ISNULL(ta.house_no_flat, '')) as [Target - Flat No.], LOWER(RTRIM(ISNULL(ta.building, ''))) as [Target - Building], LOWER(RTRIM(ISNULL(ta.road_street, ''))) as [Target - Street], LOWER(RTRIM(ISNULL(ta.district, ''))) as [Target - District], LOWER(RTRIM(ISNULL(ta.town, ''))) as [Target - Town], LOWER(RTRIM(ISNULL(ta.county, ''))) as [Target - County], RTRIM(ISNULL(ta.postcode, '')) as [Target - PostCode]ThanksTryst
View 2 Replies
View Related
Feb 8, 2006
Hi all,
Is this at all possible? In the following query I have mutiple columns in my SELECT statement that each have their own alias. Is it possible that I can use just one Alias for all these columns (such as Address), and if so how is it done?
Code:
SELECTRTRIM(ISNULL(ta.house_no_flat, '')) as [Target - Flat No.],
LOWER(RTRIM(ISNULL(ta.building, ''))) as [Target - Building],
LOWER(RTRIM(ISNULL(ta.road_street, ''))) as [Target - Street],
LOWER(RTRIM(ISNULL(ta.district, ''))) as [Target - District],
LOWER(RTRIM(ISNULL(ta.town, ''))) as [Target - Town],
LOWER(RTRIM(ISNULL(ta.county, ''))) as [Target - County],
RTRIM(ISNULL(ta.postcode, '')) as [Target - PostCode]
Thanks
Tryst
View 2 Replies
View Related
Sep 10, 2015
Created a new scheduled job using Transact-SQL.
Running a basic script SELECT FROM WHERE
As of now, it places it into one column, for all the fields.
I need the fields to be placed in their respective columns. Tried saving it as .xls and .csv. Same issue. Running SQL Server 2008R2.
View 2 Replies
View Related
Apr 23, 2008
I have built an Advanced Search page which allows users to select which columns to return (via checkbox) and to enter search criteria for any of the selected columns (into textboxes). I build the SQL statement from the properties of the controls. Works great.
My problem is getting my gridview control to play nicely. At first I used a SqlDataReader and bound the gridview to it, thus giving me the ability to run new SQL statements through it (with different columns each time). Worked nicely. But, per Microsoft, sorting can only be done if the gridview is bound to a datasource control like the SqlDataSource. So I wrote the code to handle sorting. No big deal; worked nicely. But I could not adjust the column widths programmatically unless bound to a datasource control like the SqlDataSource. And could not figure out a work around.
So, I decided to use the SqlDataSource. Works great. Except, I cannot figure out how to run a new SELECT statement through the SQLDataSource and have the gridview respond accordingly. If I try to return anything other than the exact same columns defined declaratively in the html, it pukes. But I need to be able to return a new selection of columns each time. For example, first time through the user selects columns 1,2,3,4 – the gridview should show those 4 columns. The second time the user selects columns 2,5,7 – the gridview should those 3 columns (and ONLY those 3 columns). Plus support selection and sorting.
I am desperate on this. I've burned 2.5 days researching and testing. Does anyone have any suggestions?
Thanks,
Brad
View 9 Replies
View Related
Feb 5, 2015
I have this update statement I am trying to use, to update a table. My problem is if there is no data in the select statement, it still adds number to the columns. How can I have this update statement work to put blank value in if there are no counts?
UPDATE T_AXA_BreakDown_Claims
SET [Claim Count Conm] = t2.[Claim Count Conm]
FROM T_AXA_BreakDown_Claims t1
INNER JOIN
(select
[code]....
View 2 Replies
View Related
Aug 20, 2014
I am currently trying to write a query that pulls a summation of item specific data from sales orders. For simplicity's sake, the column structure can be something like the following...
Item#,
PoundsDuringWeekNumber (this would be the current week number out of the 52 weeks in a year and the pounds of the item during that week)
However, those are not going to be the only 2 columns. The idea of the query is that the user would be able to provide the query a date range (say 2 months) and the columns would then morph into the following...
Item#,
PoundsDuringWeekNumber (current),
PoundsDuringWeekNumber(current - 1),
PoundsDuringWeekNumber (current - 2),
etc. etc.
PoundsDuringWeekNumber(current - 8)
Initial ideas where to create a function to execute the summation of the pounds during the date range of the week in question and execute it across the columns, but with the indeterminable number of columns, the query would not know how many times to execute the function.
View 1 Replies
View Related
Jul 14, 2014
I have a table that holds notes for item's. I'm want to do a select statement where one of my columns assigns a sequential value to each row based on the item number. Would like data to look like this where doc_no would be my row_number function:
item_no seq_no note doc_no
ABC 1 blah 1
ABC 2 blahh 1
ABC 3 bla3 1
XYZ 1 more n 2
XYZ 2 another 2
EFG 1 blahhh 3
View 2 Replies
View Related
Aug 31, 2015
Below. I have also pasted the current result of this query and the desired result.
Query can be updated to get the desired result as given below?
Query:
Select c.OTH_PAYER_ID, c.PAID_DATE, f.GROUP_CODE, f.REASON_CODE, f.ADJUSTMENT_AMOUNT
From MMIT_CLAIM_ITEM b, mmit_tpl c , mmit_attachment_link d, MMIT_TPL_GROUP_RSN_ADJ f
where b.CLAIM_ICN_NU = d.CLAIM_ICN and b.CLAIM_ITEM_LINE_NU = d.CLAIM_LINE_NUM and c.TPL_TS = d.TPL_TS and f.TPL_TS = c.TPL_TS and b.CLAIM_ICN_NU = '123456788444'
Current Result which I am getting with this query
OTH_PAYER_ID PAID_DATE GROUP_CODE REASON_CODE ADJUSTMENT_AMOUNT
5501 07/13/2015 CO 11 23.87
5501 07/13/2015 PR 12 3.76
5501 07/13/2015 OT 32 33.45
2032 07/14/2015 CO 12 23.87
2032 07/14/2015 OT 14 43.01
Desired/Expected Result for which I need updated query
OTH_PAYER_ID PAID_DATE GROUP_CODE_1 REASON_CODE_1 ADJUSTMENT_AMOUNT_1 GROUP_CODE_2
REASON_CODE_2 ADJUSTMENT_AMOUNT_2 GROUP_CODE_3 REASON_CODE_3 ADJUSTMENT_AMOUNT_3
5501 07/13/2015 CO 11 23.87 PR 12 3.76 OT 32 33.45 2032 07/14/2015 CO 12 23.87 OT 14 43.01
Using DB2.
View 2 Replies
View Related
Sep 3, 2007
Hello... im having a problem with my query optimization....
I have a query that looks like this:
SELECT * FROM table1
WHERE location_id IN (SELECT location_id from location_table WHERE account_id = 998)
it produces my desired data but it takes 3 minutes to run the query... is there any way to make this faster?... thank you so much...
View 3 Replies
View Related
Apr 29, 2015
I have a business need to create a report by query data from a MS SQL 2008 database and display the result to the users on a web page. The report initially has 6 columns of data and 2 out of 6 have JSON data so the users request to have those 2 JSON columns parse into 15 additional columns (first JSON column has 8 key/value pairs and the second JSON column has 7 key/value pairs). Here what I have done so far:
I found a table value function (fnSplitJson2) from this link [URL]. Using this function I can parse a column of JSON data into a table. So when I use the function above against the first column (with JSON data) in my query (with CROSS APPLY) I got the right data back the but I got 8 additional rows of each of the row in my table. The reason for this side effect is because the function returned a table of 8 row (8 key/value pairs) for each json string data that it parsed.
1. First question: How do I modify my current query (see below) so that for each row in my table i got back one row with 19 columns.
SELECT A.ITEM1,A.ITEM2,A.ITEM3,A.ITEM4, B.*
FROM PRODUCT A
CROSS APPLY fnSplitJson2(A.ITEM5,NULL) B
If updated my query (see below) and call the function twice within the CROSS APPLY clause I got this error: "The multi-part identifier "A.ITEM6" could be be bound.
2. My second question: How to i get around this error?
SELECT A.ITEM1,A.ITEM2,A.ITEM3,A.ITEM4, B.*, C.*
FROM PRODUCT A
CROSS APPLY fnSplitJson2(A.ITEM5,NULL) B, fnSplitJson2(A.ITEM6,NULL) C
I am using Microsoft SQL Server 2008 R2 version. Windows 7 desktop.
View 14 Replies
View Related
Aug 27, 2014
I'd like to first figure out the count of how many rows are not the Current Edition have the following:
Second I'd like to be able to select the primary key of all the rows involved
Third I'd like to select all the primary keys of just the rows not in the current edition
Not really sure how to describe this without making a dataset
CREATE TABLE [Project].[TestTable1](
[TestTable1_pk] [int] IDENTITY(1,1) NOT NULL,
[Source_ID] [int] NOT NULL,
[Edition_fk] [int] NOT NULL,
[Key1_fk] [int] NOT NULL,
[Key2_fk] [int] NOT NULL,
[Code] .....
Group by fails me because I only want the groups where the Edition_fk don't match...
View 4 Replies
View Related
Sep 10, 2007
I am working on a Statistical Reporting system where:
Data Repository: SQL Server 2005
Business Logic Tier: Views, User Defined Functions, Stored Procedures
Data Access Tier: Stored Procedures
Presentation Tier: Reporting ServicesThe end user will be able to slice & dice the data for the report by
different organizational hierarchies
different number of layers within a hierarchy
select a organization or select All of the organizations with the organizational hierarchy
combinations of selection criteria, where this selection criteria is independent of each other, and also differeBelow is an example of 2 Organizational Hierarchies:
Hierarchy 1
Country -> Work Group -> Project Team (Project Team within Work Group within Country)
Hierarchy 2
Client -> Contract -> Project (Project within Contract within Client)Based on 2 different Hierarchies from above - here are a couple of use cases:
Country = "USA", Work Group = "Network Infrastructure", Project Team = all teams
Country = "USA", Work Group = all work groups
Client = "Client A", Contract = "2007-2008 Maint", Project = "Accounts Payable Maintenance"
Client = "Client A", Contract = "2007-2008 Maint", Project = all
Client = "Client A", Contract = allI am totally stuck on:
How to implement the data interface (Stored Procs) to the Reports
Implement the business logic to handle the different hierarchies & different number of levelsI did get help earlier in this forum for how to handle a parameter having a specific value or NULL value (to select "all")
(WorkGroup = @argWorkGroup OR @argWorkGrop is NULL)
Any Ideas? Should I be doing this in SQL Statements or should I be looking to use Analysis Services.
Thanks for all your help!
View 1 Replies
View Related
Apr 20, 2014
I have one table namely consumer with approx 50 columns.
I have created one same table with audit prefix including 2 more column for action n timestamp fields.
My question is that if user change only 10 column data at a time: i want to add only that particular column data rather to add entire row. Currently I am adding entire row in audit table but now scenario is change to update only updated column data.
View 7 Replies
View Related
Apr 9, 2008
hi need help from the wonderful people here
i am working on project and convert a OLD DOS program to SQL server on the web
this is the resalt i need to show
napipot
Fname
new_unit
day1
day11
day111
day2
day22
day222
day3
day33
day333
day4
day44
day444
1
aaaa
1_1
A
C
Q
D
E
y
2
bbbb
2_2
-
E
A
d
3
cccc
3_3
B
F
B
z
f
4
dddd
1_1
-
*
5
eeee
4_4
C
A
C
--------------------------------------------------------add space row-------------------------
result row
Ok
OK
OK
ok
B
ok
ok
ok
ok
A
B
C
i need check only the
A
B
C
if not show the missing A B C
like this
A on the left
B on middleC on right
View 1 Replies
View Related
Mar 31, 2006
I've called a resultset from SQL Server
using an SQL Selection. I need to iterate over that entire result set
(200+ columns/fields) and all I need are the random numbers contained
in any of the rows/columns. I don't want to have to name each
field/column and then use an if > 0 statement.Isn't there
some way to generically loop through the column's by index or something
instead of their field name so I can just use an integer loop to walk
the dataset? I know there is I've done it about 5 years ago. The
question is how do you do it in C#?SqlConnection thisConn = new SqlConnection(ConfigurationManager.ConnectionStrings["SQLQuery"].ConnectionString); SqlCommand thisCmd = new SqlCommand("Command String", thisConn); thisCmd.CommandText = "Select * from SelectionsByCountry where [" + DropDownList1.SelectedItem.ToString() + "] > '0'"; thisConn.Open(); SqlDataReader thisReader = null; thisReader = thisCmd.ExecuteReader(CommandBehavior.CloseConnection); while (thisReader.Read()) { DropDownList2.Items.Add(thisReader["System"].ToString().Trim());/*** There are 200+ columns left I want to walk over using a loop structure of some sort. How do I do that?*/ }- Rex
View 2 Replies
View Related
