SELECT Stored Procedure Results Into Variable
Aug 21, 2007Is there a way to select the results of an SP into a variable.
For example:
DECLARE @X varchar(1000)
SELECT @X= sp_who2
How do I do this?
ADVERTISEMENT
Using Select Results In A Stored Procedure
Jul 23, 2005I'm sure this is an obvious question but much of SQL is new to me.I have a stored procedure and I want to use the results of a selectstatement elsewhere in the stored prcedure. The select statement willreturn at most one record and only one column, here's an example :select top 1 Sequence from MyTablewhere ParentId=4 and Sequence > 200 order by sequenceCan I put this result in a variable? Do I have to use SELECT INTOTempTable and refer to TempTable and then drop the table at the end ofthe stored procedure? I have read a little about cursors, are thesethe way to go?I'm confused as to what my options are, any help or links to help willbe appreciated.Thanks for reading.
View 1 Replies View RelatedHow To Put A Select Statement And Get Results In A Stored Procedure
Feb 2, 2008Hello,I have written a stored procedure where I prompt the user for the Year and the Month (see below)How do I take the variable @TheMonth and find out how many days is in the month and then loop to display a total for every day in the selected month.Can someone please point me in the right direction.
CREATE PROCEDURE crm_contact_frequency_report
@TheYear varchar(4),@TheMonth varchar(2)
AS
SELECT
/* EMAILS (B) */(SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN Email B ON A.subject = B.subject WHERE (YEAR(B.CreatedOn) = @TheYear) AND (MONTH(B.CreatedOn) = @TheMonth) AND (B.directioncode = 1)) AS Total_EmailOutgoing,
(SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN Email B ON A.subject = B.subject WHERE (YEAR(B.CreatedOn) = @TheYear) AND (MONTH(B.CreatedOn) = @TheMonth) AND (B.directioncode = 0)) AS Total_EmailImconing,
(SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN Email B ON A.subject = B.subject WHERE (YEAR(B.CreatedOn) = @TheYear) AND (MONTH(B.CreatedOn) = @TheMonth) AND (B.directioncode IS NULL)) AS Total_EmailNotListed,
(SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN Email B ON A.subject = B.subject WHERE (YEAR(B.CreatedOn) = @TheYear) AND (MONTH(B.CreatedOn) = @TheMonth)) AS Total_All_Emails,
/* PHONE CALLS (C) */(SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN PhoneCall C ON A.subject = C.subject WHERE (YEAR(C.CreatedOn) = @TheYear) AND (MONTH(C.CreatedOn) = @TheMonth) AND (C.directioncode = 1)) AS Total_CallOutgoing,
(SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN PhoneCall C ON A.subject = C.subject WHERE (YEAR(C.CreatedOn) = @TheYear) AND (MONTH(C.CreatedOn) = @TheMonth) AND (C.directioncode = 0)) AS Total_CallIncoming,
(SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN PhoneCall C ON A.subject = C.subject WHERE (YEAR(C.CreatedOn) = @TheYear) AND (MONTH(C.CreatedOn) = @TheMonth) AND (C.directioncode IS NULL)) AS Total_CallNotListed,
(SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN PhoneCall C ON A.subject = C.subject WHERE (YEAR(C.CreatedOn) = @TheYear) AND (MONTH(C.CreatedOn) = @TheMonth)) AS Total_All_Calls,
/* FAXES (D) */(SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN Fax D ON A.subject = D.subject WHERE (YEAR(D.CreatedOn) = @TheYear) AND (MONTH(D.CreatedOn) = @TheMonth) AND (D.directioncode = 1)) AS Total_FaxOutgoing,
(SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN Fax D ON A.subject = D.subject WHERE (YEAR(D.CreatedOn) = @TheYear) AND (MONTH(D.CreatedOn) = @TheMonth) AND (D.directioncode = 0)) AS Total_FaxIncoming,
(SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN Fax D ON A.subject = D.subject WHERE (YEAR(D.CreatedOn) = @TheYear) AND (MONTH(D.CreatedOn) = @TheMonth) AND (D.directioncode IS NULL)) AS Total_FaxNotListed,
(SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN Fax D ON A.subject = D.subject WHERE (YEAR(D.CreatedOn) = @TheYear) AND (MONTH(D.CreatedOn) = @TheMonth)) AS Total_All_Faxes
FROM CampaignResponse AGO
Accessing SELECT Results Within A Stored Procedure
May 18, 2004Hi,
Can anyone tell me how to access the results from a select statement within the stored procedure?
This is to implement auditting functionality, before updating a record i want select the original record and compare the contents of each field with the varibles that are passed in, if the fields contents has changed i want to write an audit entry.
So i'd like to store the results of the select statement in a variable and access it like a dataset. e.g
declare selectResult
set selectResult = Select field1,field2,field3 from table1
if selectResult.field1 <> @field1
begin
exec writeAudit @var1,@var2,var3
end
Many thanks.
SELECT And Stored Procedure Producing Different Results?!?!?
Aug 29, 2005I ran my SP in QA and it brought back some data from my live database but I had my test DB selected from the DDL at the top of the screen. So i ran a Select statement on the whole table in a different query window (with the same parameters)and it gave me the correct info. Any idea y? They both should be bringing back information from the same table not one from my live DB and one from my TEST DB. Please help me--I'm so lost!min max rate <----This is what my stored procedure brought back(data from my live DB) ---it has parameters 90 100 .4080 89 .3070 79 .2559 69 .1549 58 .10The stored procedure is as follows: CREATE PROCEDURE dbo.sp_WageMatrix_GetRate( @CompanyID nvarchar(2), @FacilityID nvarchar(2))AS SET NOCOUNT ON;SELECT [Min], [Max], Rate FROM Performance.dbo.WageMatrix WHERE (CompanyID = @CompanyID) AND (FacilityID = @FacilityID) AND PeriodID = dbo.fn_GetCurrentPeriod(CompanyID, FacilityID)ORDER BY RangeIDmy select statement brought back the following:min max rate 90 100 .4080 89 .3070 79 .2560 69 .15and I ran the following select statement: SELECT [Min], [Max], [Rate] FROM [PerformanceDEV].[dbo].[WageMatrix] where companyid = '21' and facilityid = '01' and periodid = 2order by rangeid
View 2 Replies View RelatedUse Select Staement Results In A Stored Procedure
Jan 10, 2006Hi.
I am new to SQl server. I would like to write a query with the follwing logic:
---------
Select department from table1;
then insert each result row into a table with in the same query.
---------
Results Of SQL SELECT Statement Into Stored Procedure
Jul 23, 2005I need to run a stored procedure on all the results of a select query.For a simplified example, I'd like to be able to do something likethis:SELECT JobID, QtyToAddFROM JobsWHERE QtyToAdd > 0Then for the results of the above:EXEC sp_stockadd @JobID, @QtyToAddWhere the above line ran for every result from the above select query.Anyone able to shed some light on how to do this?Many thanks,James
View 2 Replies View RelatedSelect Script Returning Different Results When Used In A Stored Procedure.
Nov 20, 2007
I have a script with a number of different Left Joins. When I run it in Query Analyzer the Left Join works as a normal join and suppresses some rows. However when the same code is used in a stored procedure the correct results are produced when the stored procedure is executed.
Can anyone tell me what is causing this?
SELECT USR.ROLEUSER
,PER.NAME
,EMP.PAYGROUP
,USR.ROLENAME
,OPR.EMPLID
,OPR.OPRDEFNDESC
,OPR.ACCTLOCK
,OPR.ROWSECCLASS
,EMP.JOBCODE
,JCD.DESCR
,EMP.DEPTID
,EMP.DEPTNAME
FROM PSROLEUSER USR
JOIN
PSOPRDEFN OPR
ON
USR.ROLEUSER = OPR.OPRID
LEFT OUTER JOIN
PS_PERSONAL_DATA PER
ON
OPR.EMPLID = PER.EMPLID
LEFT OUTER JOIN
PS_EMPLOYEES EMP
ON
OPR.EMPLID = EMP.EMPLID
LEFT OUTER JOIN
PS_JOBCODE_TBL JCD
ON
JCD.SETID = 'RBLTT'
AND EMP.JOBCODE = JCD.JOBCODE
AND JCD.EFFDT =
(SELECT MAX(EFFDT)
FROM PS_JOBCODE_TBL
WHERE JCD.SETID = SETID
AND JCD.JOBCODE = JOBCODE
AND EFFDT <= GETDATE())
WHERE OPR.ACCTLOCK = 0
AND USR.ROLENAME = 'RBL MANAGER'
AND EMP.PAYGROUP NOT IN ('RBA', 'RMA')
Stored Procedure Select Top &<@Variable&>
Feb 3, 2006when passing a value to a stored procedure
How can you use that value within a Select Top <@Variable>
?
Below is the basic idea ..
CREATE Procedure SelectTop
(
@Number int
)
AS
SELECT TOP @Number *
FROM TableName
GO
Stored Procedure W/Variable In Select
Jan 19, 2004Hello again folks, I've come crying for some more help :(
I have an sql query that runs fairly well and I'd like to make it a stored procedure.
The only hickup here is that I need to be able to send a field name in the select statement as a variable.
SQL Server does not allow this and I'm at a loss for the best way to handle it.
Thx for any help :)
CREATE PROCEDURE spReturnandScoring (@varKeyField as varchar(100),@varRegionID as varchar(10))
AS
Select
@varKeyField,count(*) 'SurveysSent',Sum(SD.return_status) 'SurveysReturned',avg(alScoring.Score) 'SurveyScore'
From
tblSurveyData SD
left join (Select Return_Key,cast(sum(response) as numeric)/cast(count(*) as numeric) as 'Score' from tblResponses RE group by return_key) alScoring on SD.objid = alScoring.Return_Key
Where
Region_ID=@varRegionID
Group By
@varKeyField
Order By
@varKeyField
GO
T-SQL (SS2K8) :: Stored Procedure And SELECT Statement Return Different Results
Dec 4, 2014I have a stored procedure on a SQL Server 2008 database. The stored procedure is very simple, just a SELECT statement. When I run it, it returns 422 rows. However, when I run the SELECT statement from the stored procedure, it returns 467 rows. I've tried this by running both the stored procedure and the SELECT statement in the same SSMS window at the same time, and the behavior is the same. The stored procedure is:
USE [REMS]
GO
/****** Object: StoredProcedure [mobile].[GetAllMobileDeviceUsers] Script Date: 12/04/2014 */
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
[Code] ....
When I do this in the same SSMS window:
exec mobile.GetAllMobileDeviceUsers
SELECT
ee.EmployeeID,
EmployeeName = LastName + ', ' + FirstName
FROM EmployeeInvData ee
--UNION
[Code] ....
I get two result sets. The first is 422 rows; the second is 467 rows. Why?
Stored Procedure - SELECT COLUMN FROM A VARIABLE
Jan 3, 2008I have a table that has a number of columns and rows and I need to run a stored procedure to extract data based on the column name and row name. Can anyone help me?
Many thanks
Select Statement As Input Variable In Stored Procedure?
May 6, 2015Is it possible to have an entire sql select statement as the input variable to a stored procedure? I want the stored procedure to execute the select statement.
ie.
exec sp_SomeFunc 'select * from table1 where id=1'
It may sound weird, but I have my reason for wanting to do it this way. Is this possible? if so, how do I implement this inside the stored procedure?
Storing Results Of Select Statement In @variable
Feb 11, 2008
I'm new to sql stored procedures but I would like to store the results
of an sql statement in a variable such as:
SET @value = select max(price) from product
but this does not work, can someone tell me how I would go
about in storing the results in a variable.
@value is declared as int
Thanks in advance,
Sharp_At_C
Getting A Variable That Has A SELECT Statement To Return Results
May 21, 2006I have concatenated a long Select Statement and assigned it to a variable. (i.e.)
@a = Select * from foo ---Obviously mine is much more robust
How do I execute @a to actually Select * from foo?
Invalid Results For Order By On Select Query Against Table Variable
Jan 21, 2008I am attempting to sort the results of a query executed against a table variable in descending order. The data is being inserted into the table variable as expected, however when I attempt to order the results in descending order, the results are incorrect. I have included the code as well as the result set.
DECLARE @tblCustomRange AS TABLE
(
RecordID INTEGER IDENTITY(1,1),
RangeMonth INTEGER,
RangeDay INTEGER
)
DECLARE @Month INTEGER
DECLARE @Day INTEGER
-- Initialize month and day variables.
SET @Month = 8
SET @Day = 11
-- Insert records into the table variable.
INSERT INTO @tblCustomRange
(RangeMonth, RangeDay) VALUES (1,2)
INSERT INTO @tblCustomRange
(RangeMonth, RangeDay) VALUES (1,27)
INSERT INTO @tblCustomRange
(RangeMonth, RangeDay) VALUES (6,10)
INSERT INTO @tblCustomRange
(RangeMonth, RangeDay) VALUES (9,22)
INSERT INTO @tblCustomRange
(RangeMonth, RangeDay) VALUES (12,16)
-- Select everything from the table variable ordering the results by month, day in
-- descending order
SELECT * FROM @tblCustomRange
WHERE (RangeMonth < @Month) OR
(RangeMonth = @Month AND RangeDay <= @Day)
ORDER BY RangeMonth, RangeDay DESC
I am getting the following resultset:
RecordID RangeMonth RangeDay
----------- ----------- -----------
2 1 27
1 1 2
3 6 10
I am expecting the following resultset:
RecordID RangeMonth RangeDay
----------- ----------- -----------
3 6 10
2 1 27
1 1 2
SSIS: Problem Mapping Global Variables To Stored Procedure. Can't Pass One Variable To Sp And Return Another Variable From Sp.
Feb 27, 2008I'm new to SSIS, but have been programming in SQL and ASP.Net for several years. In Visual Studio 2005 Team Edition I've created an SSIS that imports data from a flat file into the database. The original process worked, but did not check the creation date of the import file. I've been asked to add logic that will check that date and verify that it's more recent than a value stored in the database before the import process executes.
Here are the task steps.
[Execute SQL Task] - Run a stored procedure that checks to see if the import is running. If so, stop execution. Otherwise, proceed to the next step.
[Execute SQL Task] - Log an entry to a table indicating that the import has started.
[Script Task] - Get the create date for the current flat file via the reference provided in the file connection manager. Assign that date to a global value (FileCreateDate) and pass it to the next step. This works.
[Execute SQL Task] - Compare this file date with the last file create date in the database. This is where the process breaks. This step depends on 2 variables defined at a global level. The first is FileCreateDate, which gets set in step 3. The second is a global variable named IsNewFile. That variable needs to be set in this step based on what the stored procedure this step calls finds out on the database. Precedence constraints direct behavior to the next proper node according to the TRUE/FALSE setting of IsNewFile.
If IsNewFile is FALSE, direct the process to a step that enters a log entry to a table and conclude execution of the SSIS.
If IsNewFile is TRUE, proceed with the import. There are 5 other subsequent steps that follow this decision, but since those work they are not relevant to this post.
Here is the stored procedure that Step 4 is calling. You can see that I experimented with using and not using the OUTPUT option. I really don't care if it returns the value as an OUTPUT or as a field in a recordset. All I care about is getting that value back from the stored procedure so this node in the decision tree can point the flow in the correct direction.
CREATE PROCEDURE [dbo].[p_CheckImportFileCreateDate]
/*
The SSIS package passes the FileCreateDate parameter to this procedure, which then compares that parameter with the date saved in tbl_ImportFileCreateDate.
If the date is newer (or if there is no date), it updates the field in that table and returns a TRUE IsNewFile bit value in a recordset.
Otherwise it returns a FALSE value in the IsNewFile column.
Example:
exec p_CheckImportFileCreateDate 'GL Account Import', '2/27/2008 9:24 AM', 0
*/
@ProcessName varchar(50)
, @FileCreateDate datetime
, @IsNewFile bit OUTPUT
AS
SET NOCOUNT ON
--DECLARE @IsNewFile bit
DECLARE @CreateDateInTable datetime
SELECT @CreateDateInTable = FileCreateDate FROM tbl_ImportFileCreateDate WHERE ProcessName = @ProcessName
IF EXISTS (SELECT ProcessName FROM tbl_ImportFileCreateDate WHERE ProcessName = @ProcessName)
BEGIN
-- The process exists in tbl_ImportFileCreateDate. Compare the create dates.
IF (@FileCreateDate > @CreateDateInTable)
BEGIN
-- This is a newer file date. Update the table and set @IsNewFile to TRUE.
UPDATE tbl_ImportFileCreateDate
SET FileCreateDate = @FileCreateDate
WHERE ProcessName = @ProcessName
SET @IsNewFile = 1
END
ELSE
BEGIN
-- The file date is the same or older.
SET @IsNewFile = 0
END
END
ELSE
BEGIN
-- This is a new process for tbl_ImportFileCreateDate. Add a record to that table and set @IsNewFile to TRUE.
INSERT INTO tbl_ImportFileCreateDate (ProcessName, FileCreateDate)
VALUES (@ProcessName, @FileCreateDate)
SET @IsNewFile = 1
END
SELECT @IsNewFile
The relevant Global Variables in the package are defined as follows:
Name : Scope : Date Type : Value
FileCreateDate : (Package Name) : DateType : 1/1/2000
IsNewFile : (Package Name) : Boolean : False
Setting the properties in the "Execute SQL Task Editor" has been the difficult part of this. Here are the settings.
General
Name = Compare Last File Create Date
Description = Compares the create date of the current file with a value in tbl_ImportFileCreateDate.
TimeOut = 0
CodePage = 1252
ResultSet = None
ConnectionType = OLE DB
Connection = MyServerDataBase
SQLSourceType = Direct input
IsQueryStoredProcedure = False
BypassPrepare = True
I tried several SQL statements, suspecting it's a syntax issue. All of these failed, but with different error messages. These are the 2 most recent attempts based on posts I was able to locate.
SQLStatement = exec ? = dbo.p_CheckImportFileCreateDate 'GL Account Import', ?, ? output
SQLStatement = exec p_CheckImportFileCreateDate 'GL Account Import', ?, ? output
Parameter Mapping
Variable Name = User::FileCreateDate, Direction = Input, DataType = DATE, Parameter Name = 0, Parameter Size = -1
Variable Name = User::IsNewFile, Direction = Output, DataType = BYTE, Parameter Name = 1, Parameter Size = -1
Result Set is empty.
Expressions is empty.
When I run this in debug mode with this SQL statement ...
exec ? = dbo.p_CheckImportFileCreateDate 'GL Account Import', ?, ? output
... the following error message appears.
SSIS package "MyPackage.dtsx" starting.
Information: 0x4004300A at Import data from flat file to tbl_GLImport, DTS.Pipeline: Validation phase is beginning.
Error: 0xC002F210 at Compare Last File Create Date, Execute SQL Task: Executing the query "exec ? = dbo.p_CheckImportFileCreateDate 'GL Account Import', ?, ? output" failed with the following error: "No value given for one or more required parameters.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Compare Last File Create Date
Warning: 0x80019002 at GLImport: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "MyPackage.dtsx" finished: Failure.
When the above is run tbl_ImportFileCreateDate does not get updated, so it's failing at some point when calling the procedure.
When I run this in debug mode with this SQL statement ...
exec p_CheckImportFileCreateDate 'GL Account Import', ?, ? output
... the tbl_ImportFileCreateDate table gets updated. So I know that data piece is working, but then it fails with the following message.
SSIS package "MyPackage.dtsx" starting.
Information: 0x4004300A at Import data from flat file to tbl_GLImport, DTS.Pipeline: Validation phase is beginning.
Error: 0xC001F009 at GLImport: The type of the value being assigned to variable "User::IsNewFile" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
Error: 0xC002F210 at Compare Last File Create Date, Execute SQL Task: Executing the query "exec p_CheckImportFileCreateDate 'GL Account Import', ?, ? output" failed with the following error: "The type of the value being assigned to variable "User::IsNewFile" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Compare Last File Create Date
Warning: 0x80019002 at GLImport: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "MyPackage.dtsx" finished: Failure.
The IsNewFile global variable is scoped at the package level and has a Boolean data type, and the Output parameter in the stored procedure is defined as a Bit. So what gives?
The "Possible Failure Reasons" message is so generic that it's been useless to me. And I've been unable to find any examples online that explain how to do what I'm attempting. This would seem to be a very common task. My suspicion is that one or more of the settings in that Execute SQL Task node is bad. Or that there is some cryptic, undocumented reason that this is failing.
Thanks for your help.
Calling A Stored Procedure From ADO.NET 2.0-VB 2005 Express: Working With SELECT Statements In The Stored Procedure-4 Errors?
Mar 3, 2008Hi all,
I have 2 sets of sql code in my SQL Server Management Stidio Express (SSMSE):
(1) /////--spTopSixAnalytes.sql--///
USE ssmsExpressDB
GO
CREATE Procedure [dbo].[spTopSixAnalytes]
AS
SET ROWCOUNT 6
SELECT Labtests.Result AS TopSixAnalytes, LabTests.Unit, LabTests.AnalyteName
FROM LabTests
ORDER BY LabTests.Result DESC
GO
(2) /////--spTopSixAnalytesEXEC.sql--//////////////
USE ssmsExpressDB
GO
EXEC spTopSixAnalytes
GO
I executed them and got the following results in SSMSE:
TopSixAnalytes Unit AnalyteName
1 222.10 ug/Kg Acetone
2 220.30 ug/Kg Acetone
3 211.90 ug/Kg Acetone
4 140.30 ug/L Acetone
5 120.70 ug/L Acetone
6 90.70 ug/L Acetone
/////////////////////////////////////////////////////////////////////////////////////////////
Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming:
//////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
sqlDataAdapter.SelectCommand.Command.Type = CommandType.StoredProcedure
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class
///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors:
Error #1: Type 'SqlConnection' is not defined (in Form1.vb)
Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb)
Error #3: Array bounds cannot appear in type specifiers (in Form1.vb)
Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance,
Scott Chang
More Information for you to know:
I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly.
I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
Using A Stored Procedure To Query Other Stored Procedures And Then Return The Results
Jun 13, 2007Seems like I'm stealing all the threads here, : But I need to learn :) I have a StoredProcedure that needs to return values that other StoredProcedures return.Rather than have my DataAccess layer access the DB multiple times, I would like to call One stored Procedure, and have that stored procedure call the others to get the information I need. I think this way would be more efficient than accessing the DB multiple times. One of my SP is:SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, S.Name AS 'StatusName', S.ItemDetailStatusID, S.InProgress as 'StatusInProgress', S.Color AS 'StatusColor',T.[Name] AS 'TypeName', T.Prefix, T.Name AS 'ItemDetailTypeName', T.ItemDetailTypeID FROM [Item].ItemDetails I INNER JOIN Item.ItemDetailStatus S ON I.ItemDetailStatusID = S.ItemDetailStatusID INNER JOIN [Item].ItemDetailTypes T ON I.ItemDetailTypeID = T.ItemDetailTypeID However, I already have StoredProcedures that return the exact same data from the ItemDetailStatus table and ItemDetailTypes table.Would it be better to do it above, and have more code to change when a new column/field is added, or more checks, or do something like:(This is not propper SQL) SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, EXEC [Item].ItemDetailStatusInfo I.ItemDetailStatusID, EXEC [Item].ItemDetailTypeInfo I.ItemDetailTypeID FROM [Item].ItemDetails IOr something like that... Any thoughts?
View 3 Replies View RelatedT-SQL (SS2K8) :: One Stored Procedure Return Data (select Statement) Into Another Stored Procedure
Nov 14, 2014I am new to work on Sql server,
I have One Stored procedure Sp_Process1, it's returns no of columns dynamically.
Now the Question is i wanted to get the "Sp_Process1" procedure return data into Temporary table in another procedure or some thing.
Stored Procedures (SELECT Then Use Results)
Jun 17, 2004Hi,
I need to keep track of the number of hits on a particular page. Im using a stored Procedure
What I want to do is get the number of hits and increment it by one :)
ie: Sub Procedure should be like below
SELECT noOfHits WHERE pageName = 'bla bla'
noOfHits = noOfHits + 1 etc.
Also, some of the pages will be added and deleted all the time, so before I increment the noOfHits variable I need to check that the pageName 'bla bla' exists. AND if it doesnt I need to create a pageName called 'bla bla'
What I need to do in essence is:
1. Check that a particular row exists. if it doesnt create it.
2. Increment a value (by one) to a column in this particular row.
Phew. Hope you got that. Any ideas much appreciated,
Thanks,
Pete
How To Stored A Stored Procedure's Results Into A Table
Jul 23, 2005Hi, How can I store a stored procedure's results(returning dataset) intoa table?Bob*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedUsing Table Name Stored In A Scalar Variable In Stored Procedure Problem
Mar 27, 2006Hello to all!
I have a table name stored in a scalar variable (input parameter of my stored procedure). I need to run SQL statement: SELECT COUNT (*) FROM MyTable and store the result of my query in a scalar variable:
For example:
declare @countRows int
set @countRows = (select count(*) from MyTable)
The problem is that the name of MyTable is stored in the input variable of my stored procedure and of corse this does not work:
declare @countRows int
set @countRows = (select count(*) from @myTableName)
I also tried this:
declare @sqlQuery varchar(100)
set @sqlQuery = 'select count(*) from ' + @myTableName
set @countRows = exec(@sqlQuery)
But it looks like function exec() does not return any value...
Any idea how to solve this problem?
Thanx,
Ziga
Need To Know How To Get Stored Procedure Results Into VB
Jun 18, 2004datagrid. Sorry, I'm new to it. For the few times I've done datagrids in the past, I've built
my own selects and filled the grid. This time I need to use someone elses stored procedure.
I simply don't know how to get the results back into my VB datagrid. Can someone point
me in the right direction? Thanks.
Results Of A Stored Procedure
Feb 1, 2007How do I filter the results of a stored procedure?
View 2 Replies View RelatedT-Sql Help - BCP Results Of Stored Procedure
Feb 25, 2008Hi
I am trying to execute a stored procedure (which returns multiple tables) and use these results to populate an Excel file. I am totally lost on how to capture the results and use it. Any help will be appreciated.
Thanks
Processing Results Of SELECT Statements In Stored Procedures
May 7, 2008In my SPs, I commonly have a situation, where a SELECT statement gets a single scalar value (e.g. SELECT Name FROM Employee WHERE id=@id) from a table.
Because the result is still a relation, I cannot process it directly or assign the result to a variable
(like set @name = SELECT Name FROM Employee WHERE id=@id)
So, how can I process the results of the statement in this case.
In some other cases, the result is actually a relation. And I want to iterate over all rows, processing each row's columns.
(I know this smells of ADO.NET, but how can I help it if I am coming from that background)...
The point is I want to do all this in T-Sql on server side!!!
Stored Procedure Not Returning Results
May 15, 2007Hi,I'm creating a stored procedure that pulls information from 4 tables based on 1 parameter. This should be very straightforward, but for some reason it doesn't work.Given below are the relevant tables: SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[tbl_Project](
[ProjID] [varchar](300) NOT NULL,
[ProjType] [varchar](20) NULL,
[ProjectTitle] [varchar](max) NULL,
[ProjectDetails] [varchar](max) NULL,
[ProjectManagerID] [int] NULL,
[RequestedBy] [varchar](max) NULL,
[DateRequested] [datetime] NULL,
[DueDate] [datetime] NULL,
[ProjectStatusID] [int] NULL,
CONSTRAINT [PK__tbl_Project__0B91BA14] PRIMARY KEY CLUSTERED
(
[ProjID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
ALTER TABLE [dbo].[tbl_Project] WITH CHECK ADD CONSTRAINT [FK_tbl_Project_tbl_ProjectManager] FOREIGN KEY([ProjectManagerID])
REFERENCES [dbo].[tbl_ProjectManager] ([ProjectManagerID])
GO
ALTER TABLE [dbo].[tbl_Project] CHECK CONSTRAINT [FK_tbl_Project_tbl_ProjectManager]
GO
ALTER TABLE [dbo].[tbl_Project] WITH CHECK ADD CONSTRAINT [FK_tbl_Project_tbl_ProjectStatus] FOREIGN KEY([ProjectStatusID])
REFERENCES [dbo].[tbl_ProjectStatus] ([ProjectStatusID])
GO
ALTER TABLE [dbo].[tbl_Project] CHECK CONSTRAINT [FK_tbl_Project_tbl_ProjectStatus]
-----------------------------------------------------------------
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[tbl_Report](
[ReportName] [varchar](50) NOT NULL,
[ProjID] [varchar](300) NULL,
[DeptCode] [varchar](50) NULL,
[ProjType] [varchar](50) NULL,
[ProjectTitle] [varchar](500) NULL,
[ProjectDetails] [varchar](3000) NULL,
[ProjectManagerID] [int] NULL,
[RequestedBy] [varchar](50) NULL,
[DateRequested] [datetime] NULL,
[DueDate] [datetime] NULL,
[ProjectStatusID] [int] NULL,
CONSTRAINT [PK_tbl_Report] PRIMARY KEY CLUSTERED
(
[ReportName] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
ALTER TABLE [dbo].[tbl_Report] WITH CHECK ADD CONSTRAINT [FK_tbl_Report_tbl_ProjectManager] FOREIGN KEY([ProjectManagerID])
REFERENCES [dbo].[tbl_ProjectManager] ([ProjectManagerID])
GO
ALTER TABLE [dbo].[tbl_Report] CHECK CONSTRAINT [FK_tbl_Report_tbl_ProjectManager]
GO
ALTER TABLE [dbo].[tbl_Report] WITH CHECK ADD CONSTRAINT [FK_tbl_Report_tbl_ProjectStatus] FOREIGN KEY([ProjectStatusID])
REFERENCES [dbo].[tbl_ProjectStatus] ([ProjectStatusID])
GO
ALTER TABLE [dbo].[tbl_Report] CHECK CONSTRAINT [FK_tbl_Report_tbl_ProjectStatus]
--------------------------------------------------------------
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[tbl_ProjectStatus](
[ProjectStatusID] [int] IDENTITY(1,1) NOT NULL,
[ProjectStatus] [varchar](max) NULL,
CONSTRAINT [PK__tbl_ProjectStatu__023D5A04] PRIMARY KEY CLUSTERED
(
[ProjectStatusID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
-----------------------------------------------------------
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[tbl_ProjectManager](
[ProjectManagerID] [int] IDENTITY(1,1) NOT NULL,
[FName] [varchar](50) NULL,
[LName] [varchar](50) NULL,
[Inactive] [int] NULL,
CONSTRAINT [PK__tbl_ProjectManag__7D78A4E7] PRIMARY KEY CLUSTERED
(
[ProjectManagerID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
And here is the stored procedure that I wrote (doesn't return results): SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[GetReportQuery]
(
@ReportName varchar(100)
)
AS
BEGIN
SET
NOCOUNT ON
IF @ReportName IS NULL
BEGIN
RETURN -1
END
ELSE
BEGIN
DECLARE @DeptCode varchar(50), @ProjID varchar(50)
SELECT @DeptCode = DeptCode FROM tbl_Report WHERE ReportName = @ReportName
SET @ProjID = @DeptCode + '-' + '%'
SELECT P.ProjID, P.ProjType, P.ProjectTitle, P.ProjectDetails, M.FName, M.LName, P.DateRequested, P.DueDate, S.ProjectStatus
FROM tbl_Project P, tbl_ProjectManager M, tbl_ProjectStatus S
WHERE ((P.ProjID = (SELECT ProjID FROM tbl_Report WHERE ((ReportName = @ReportName))))
AND (P.ProjectDetails = (SELECT ProjectDetails FROM tbl_Report WHERE ReportName = @ReportName) OR P.ProjectDetails IS NULL)
AND (M.FName = (SELECT FName FROM tbl_ProjectManager WHERE (ProjectManagerID = (SELECT ProjectManagerID FROM tbl_Report WHERE ReportName = @ReportName))) OR M.FName IS NULL)
AND (M.LName = (SELECT LName FROM tbl_ProjectManager WHERE (ProjectManagerID = (SELECT ProjectManagerID FROM tbl_Report WHERE ReportName = @ReportName))) OR M.LName IS NULL)
AND (P.DateRequested = (SELECT DateRequested FROM tbl_Report WHERE ReportName = @ReportName) OR P.DateRequested IS NULL)
AND (P.DueDate = (SELECT DueDate FROM tbl_Report WHERE ReportName = @ReportName) OR P.DueDate IS NULL)
AND (S.ProjectStatus = (SELECT ProjectStatusID FROM tbl_Report WHERE ReportName = @ReportName) OR S.ProjectStatus IS NULL)
)
END
END Can someone see what's wrong? Thanks.
Results From Stored Procedure Inset
Mar 30, 2008I am having trouble getting data back from my stored procedure insert commands. Here is what I currently have set up.
1 - A dataset called YagDag
2 - A Table adapter called tadUsers
3 - A Stored Procedure that the tadUsers uses to insert called spUser_i
It seems like the way I have my VB code set up I can only retrieve a return int. I can't figure out how to get my User GUID back, any help would be really appreciated
Public Shared Function AddUser(ByVal EMail As String, ByVal FirstName As String, ByVal LastName As String, ByVal Password As String, ByVal EMailActive As Boolean) As Integer
Dim strEMail = AppFunction.SQLSafeString(EMail)
Dim strFirstName = AppFunction.SQLSafeString(FirstName)
Dim strLastName = AppFunction.SQLSafeString(LastName)
Dim strPassword = AppFunction.SQLSafeString(Password)
Dim blnEMailActive = EMailActive
Dim Users As New YagDagTableAdapters.tadUsers
Dim guidUserYID As Guid = Users.Insert(strFirstName, strLastName, strPassword)
Return 1
End Function -- =============================================
-- Author:Greg Moser
-- Create date: 3/29/2008
-- Description:Adds a User to the tblUser
-- =============================================
ALTER PROCEDURE [dbo].[spUser_i]
@FirstName varchar(50),
@LastName varchar(50),
@Password varchar(16)
AS
BEGIN
SET NOCOUNT ON;
DECLARE @UserYID uniqueidentifier
SET @UserYID = NEWID()
-- Add User to tblUsers
INSERT INTO tblUsers (
YID,
Password,
FirstName,
LastName
)
VALUES (
@UserYID,
@Password,
@FirstName,
@LastName
)
--Return Users YID
SELECT @UserYID
END
Results From More Than Stored Procedure In A Report
Sep 23, 2004Hi,
Is there a way I can display the data returned from more than one stored procedure in a report using reporting services. Or can I use more than one dataset in the report????
Return Results Set From Stored Procedure
Oct 8, 2004Two questions - one slightly off topic:
1) How do I write a stored procedure in MS SQL so that it returns a results set?
2) How do I get this into ASP.NET so that I can put the values into controls?
Jags
Stored Procedure Not Generating Results
Oct 28, 1999I wrote a stored procedure with three variables to be passed as input parameters. The stored procedure runs a select into statement into a temp table. The resulting temp table with another table was queried using right outer join to produce the desired results.
The stored procedure compiles error free.However when I ran the stored procedure with the parameters(3) in ISQL/W (SQL Server 6.5) the headers(column-names) were displayed but no records.
When runned as a query with the same parameter values, records were produced.
Help please urgent.
Regards
Olutimi Ooruntoba
Inconsistent Stored Procedure Results
Jul 13, 2006I'm testing some code to look up values from my database and update a specific field when certain conditions are met. I'm having trouble with some code that is giving me the results I expect when I submit one set of parameters, but is not finding anything in the database for another set, when I know the data exists.
Here's the code for my stored procedure, SP:
Code:
@flightid bigint,
@departuretime smalldatetime
SELECT flightid, flightno, departuretime, origincode, destinationcode
FROM flightschedules
WHERE flightid <> @flightid
AND departuretime = CONVERT(SMALLDATETIME, @departuretime, 120)
And here's the vbscript that calls it:
Code:
vOutboundID = 452
vReturnID = 453
'--- Get the flight details ---
strOrigin = "confirmflightdetails '" & vOutboundID & "';"
set rsOrigin = Server.CreateObject("ADODB.Recordset")
rsOrigin.Open strOrigin, objConn
response.write "origin " & rsOrigin("departuretime") & "<BR>"
strReturn = "confirmflightdetails '" & vReturnID & "';"
set rsReturn = Server.CreateObject("ADODB.Recordset")
rsReturn.Open strReturn, objConn
response.write "return " & rsReturn("departuretime") & "<BR>"
strGetOFID = "SP '" & vOutboundID & "', '" & rsOrigin("departuretime") & "';"
set rsOFID = Server.CreateObject("ADODB.Recordset")
rsOFID.Open strGetOFID, objConn
DO WHILE NOT rsOFID.EOF
response.write "OFNO " & rsOFID("flightno") & " " & rsOFID("flightid") & "<br>"
rsOFID.MoveNext
Loop
strGetRFID = "SP '" & vReturnID & "', '" & rsReturn("departuretime") & "';"
set rsRFID = Server.CreateObject("ADODB.Recordset")
rsRFID.Open strGetRFID, objConn
DO WHILE NOT rsRFID.EOF
response.write "RFNO " & rsRFID("flightno") & " " & rsRFID("flightid") & "<br>"
rsRFID.MoveNext
Loop
Here's the code for confirmflightdetails:
Code:
@flightid bigint
AS
SELECT flightid, flightno, departuretime
FROM flightschedules
WHERE flightid = @flightid
When confirmflightdetails is tested, I the proper results, as confirmed by the response.write statements:
4521092006-07-29 08:00:00
4531102006-07-29 12:05:00
I put the response.write statements and loops in so I could verify the functionality.
Here's what it produces:
out 452
ret 453
origin 7/29/2006 8:00:00 AM
return 7/29/2006 12:05:00 PM
OFNO 109 450
Here's what it should produce:
out 452
ret 453
origin 7/29/2006 8:00:00 AM
return 7/29/2006 12:05:00 PM
OFNO 109 450
RFNO 110 451
If I do this in query analyzer:
Code:
select flightid, flightno, departuretime
from flightschedules
where flightid > 449 and flightid < 454
this is what I get from the database:
flightid flightno departuretime origin destination
4521092006-07-29 08:00:00 A C
4501092006-07-29 08:00:00 A B
4531102006-07-29 12:05:00 C A
4511102006-07-29 13:15:00 B A
What I'm trying to do is look up the chosen flight, then find the flight with the matching origin/destination (the other flight leg) on the same day.
I can't figure out why it's working for one set of parameters and not for the other.
Thanks in advance for any help!