I have a need to select rows where values in a column are within a range AND ALSO the first row that is highest (MAX) but just UNDER the range. For example:
NAME VAL
Jim 4
John 5
Tom 6
Julie 7
Rich 8
Rob 9
RANGE TO SELECT is 6-8 (inclusive)
Rows with a value in the range are returned (6, 7, & 8) as well as the row with a highest value that is JUST BELOW the range (5)
NAME VAL
John 5
Tom 6
Julie 7
Rich 8
I'm running a pre-defined script which used to work fine on a file which was resupplied every month. below is the script used and the error message. looking at the error I assume that there is a rouge record within the file but have looked in Textpad and cannot find it.
UPDATE [matching].[dbo].[hot_nov] SET [AOV] = (CAST([Demand] AS DECIMAL)/CAST([Orders] AS INT)) WHERE [Demand] <> '';
UPDATE [matching].[dbo].[hot_nov] SET [POST2] = left([PostCode], PATINDEX('%[0-9]%', [PostCode] + '1') - 1) ;
UPDATE [matching].[dbo].[hot_nov] SET [POST4] = left([PostCode],LEN([PostCode])-4);
UPDATE [matching].[dbo].[hot_nov] SET [POST6] = left([PostCode],LEN([PostCode])-2);
error message
(1000 row(s) affected)
Msg 245, Level 16, State 1, Line 181
Conversion failed when converting the varchar value '2014-09-03 00:00:00' to data type int.
I have 2 tables, one is table A which stores Resources Assign to work for a certain period. The structure is as below
Name StartDate EndDate
Tan 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Max 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Alan 2015-04-01 16:30:00.000 2015-04-02 00:30:00.000
The table B stores the item process time. The structure is as below
Item ProcessStartDate ProcessEndDate
V 2015-04-01 09:30:10.000 2015-04-01 09:34:45.000
Q 2015-04-01 10:39:01.000 2015-04-01 10:41:11.000
W 2015-04-01 11:44:00.000 2015-04-01 11:46:25.000
A 2015-04-01 16:40:10.000 2015-04-01 16:42:45.000
B 2015-04-01 16:43:01.000 2015-04-01 16:45:11.000
C 2015-04-01 16:47:00.000 2015-04-01 16:49:25.000
I need to select the item which process in 2015-04-01 16:40:00 and 2015-04-01 17:30:00. Beside that I need to know how many resource is assigned to process the item in that period of time. I only has the start date is 2015-04-01 16:40:00 and end date is 2015-04-01 17:30:00. How I can select the data from both tables. There is no need for JOIN, just seperate selections.
Another item process time is in 2015-04-01 10:00:00 and 2015-04-04 11:50:59.
The result expected is
Table A
Name StartDate EndDate
Alan 2015-04-01 16:30:00.000 2015-04-02 00:30:00.000
Table B
Item ProcessStartDate ProcessEndDate
A 2015-04-01 16:30:10.000 2015-04-01 16:32:45.000
B 2015-04-01 16:33:01.000 2015-04-01 16:35:11.000
C 2015-04-01 16:37:00.000 2015-04-02 16:39:25.000
Scenario 2 expected result
Table A
Name StartDate EndDate
Tan 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Max 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Table B
Item ProcessStartDate ProcessEndDate
Q 2015-04-01 10:39:01.000 2015-04-01 10:41:11.000
W 2015-04-01 11:44:00.000 2015-04-01 11:46:25.000
I am attempting to write a SQL query that retrieves info processed between two times (ie. 2:00 pm to 6:00 pm) during a date range (ie. 8/1/06 to 8/14/06)... I am new to SQL and am perplexed... I have referenced several texts, but have not found a solution. Even being pointed in the right direction would be greatly appreciated!!
View 6 Replies View RelatedI have the following table:
ID - Reference - Number
1 - null - 9000
2 - null - 9001
3 - 123 - 9002
4 - 123 - 9003
5 - null - 9004
6 - null - 9005
7 - null - 9006
I need to return the next (TOP 3) consecutive rows where Reference is null. In this case, 9004-9006. I assume a "having" clause but I'm not sure how to do this.
I have a select that is grouped by building/bedrooms and I have a rangefor the rentSelect Building,BR,drpBuilding.buildID,'$' + Cast(Min(Rent/BR) as varchar(10)) + '-' + Cast(MAX(Rent/BR) asvarchar(10)) as 'PerPerson'FROM Apt JOIN drpBuilding ONApt.buildID = drpBuilding.buildIDGroup By Building,drpBuilding.buildID,BRNow I want to only show a range if the rent varies, ie. I don't want toshow the range as being 510-510 I would then like just a single valuedisplayed. How can I do such a select?Thanks in advance,Mark Meadows
View 1 Replies View RelatedI currently use this query to select 4000 contacts from our database:
SELECT TOP 4000 * FROM wce_contact
where website not like ''
and expressemail like '%@%'
and idstatus like ''
and salutation not like '%there%'
and task not like '%x%'
So I use this query to send out emails, then I want the next set of contacts, so I am obv after the contacts 4001 to 8000. How would I right this into the above query?
Hope it all makes sense?
JT
Hi guys,whilst working on a project which I thought was nearly complete I havecome across a problem which was some how over seen, which I am hopingone of you guys know how to resovle.Firstly here is the script to create the table and insert some sampledata:CREATE TABLE [dbo].[tbltemp999] ([Machine_Name] [char] (17) COLLATE SQL_Latin1_General_CP1_CI_AS NOTNULL ,[EventDate] [datetime] NOT NULL ,[EventID] [int] NOT NULL) ON [PRIMARY]GOINSERT INTO tbltemp999 VALUES ('MOBL','2004-08-16 12:05:14.000',6006)INSERT INTO tbltemp999 VALUES ('MOBL','2004-08-16 12:08:32.000',6005)INSERT INTO tbltemp999 VALUES ('MOBL','2004-09-22 12:24:45.000',6006)INSERT INTO tbltemp999 VALUES ('MOBL','2004-09-22 12:28:25.000',6005)INSERT INTO tbltemp999 VALUES ('MOBL','2004-11-03 17:53:38.000',6006)INSERT INTO tbltemp999 VALUES ('MOBL','2004-11-03 17:57:02.000',6005)INSERT INTO tbltemp999 VALUES ('MOBL','2004-11-04 12:09:10.000',6006)INSERT INTO tbltemp999 VALUES ('MOBL','2004-11-04 12:12:48.000',6005)The EventID 6006 represents a system shut down, and the EventID 6005represents a sytem start. Therefore from the above data you cans seethat the machine is not rebooted very often.My problem occurs when you select a date BETWEEN something where thereis no data. ie BETWEEN 2004-10-01 AND 2004-10-15 my desired resultfrom this should return 15 days of uptime but as there is no data itis returning nothing:(Can anyone work this one out?ThanksSunny
View 7 Replies View RelatedHi all,Right now I have this SELECT statement:SELECT MUSIC_PK, MUSIC_TITLE, MUSIC_TITLE2, MUSIC_ORIGINAL_SINGER Now I want to add a second SELECT statement (same as above, but with an additional column) if the record was added within the 10 days (while still select other records, I just need to select an additional column). How would I do that? The additional column that I want to select is called MUSIC_NEW (so I can display if the record is new within 10 days.) I have a column in my table named DATE_ADDED, how do I go to calculate if it's within the 10 days since the day it was added to the current time?Thank you very much,Kenny.
View 8 Replies View Related Hi,I'm
apologizing in advance for using someone else's brainpower on what is
basically a logic problem rather than a creative use of T-SQL, but it's
doing me head in.I have a table which contains information on
bookings for runs of advertising. This includes a BookingStart dateTime
field and a BookingEnd datetime field. Between BookingStart and
BookingEnd an ad is considered to be "live".What I need to do
is construct a query which, given a start date and and end date returns
a count of all the records which were "live" between those dates and -
here's the catch - each week must count separately. In other words if
my query asks for data across four weeks, and an ad was "live" for two
of those weeks, it should return a count of two.Any help much appreciated.Cheers,Matt
I have a series of "Payroll Periods", called S1 thru S26 for the year. I want to create a parameter call "Pay Period" and have the user select a single pay period, i.e. S13. Elsewhere I know the beginning and ending date for each pay period, but it is in another dataset. So if the user selects S13 and I know the 13th pay period is April 1st thru April 15th, how do I use those dates as my beginning and end dates for my SQL query statement to return only the data from the selected pay period. The data itself has dates and not pay period references.
View 1 Replies View RelatedI have a table with the following data:
Type Date Subtype
1 1-1-2015 10
1 5-1-2015 10
1 6-1-2015 10
1 15-1-2015 11
1 20-1-2015 10
[Code] ....
I want to group by the data to the following while saving the first and last date within each type and subtype:
type startdate enddate subtype
1 1-1-2015 6-1-2015 10
1 15-1-2015 15-1-2015 11
1 20-1-2015 22-1-2015 10
1 25-1-2015 28-1-2015 12
2 2-1-2015 5-1-2015 11
2 6-1-2015 7-1-2015 12
2 14-1-2015 20-1-2015 11
2 23-1-2015 30-1-2015 13
I tried several approaches, but I can't fnd a solution to do this with T-SQL.
Hello out there,
I try to force my users to select a date not more than 6 months in the past. How can I limit the range of dateselection in the reportparameter? Any ideas?
Thank you very much!
Kind regards
dollmaker
I have a table has following fields(Process, datestart,dateend,datedue,,,,)
Process datestart dateend ...
A 14.07.2017 20.07.2014
B 15.07.2014 21.07.2014
C 24.07.2014 30.07.2014
What i want when user enters from date and end date. i want to filter records which are fallen between those two input dates.
if user enters 17.07.2014 and 20.07.2014 as input range. query should show only A and B process as
A 14.07.2017 20.07.2014
B 15.07.2014 21.07.2014
Can someone show me what I need to do to have a result set only displaying records from the specified date range. All the tables can relate on Date, shift, and ProductType (Besides UnprocessedProductTracking which can only relate on Date and Shift) I have a lot of trouble with joins...well I'm just not to experienced. Help!
CREATE Procedure dbo.spButterMarTotals
(
@fromdate smalldatetime,
@todate smalldatetime
)
AS
--
--Exec spButterMarTotals '11/15/06','11/15/06'
--
--
Select Distinct ButterballsThrownPounds, ReworkUsedPounds, ReworkMadePounds, CoolersUsedPounds, CoolersMadePounds, TrucksMadePounds,
ResidualFilmPounds, ResidualSqueezePounds, ProducedPounds, Blocks As ProcessingThrown, Weight AS NFCPounds, Pounds AS BirdsEyePounds,
T1AL50Type, T2Type, T3Type, T4Type, AL51Type, FillMach1Type
from tblproductionMaterialmetrics A
Inner Join tblNFCTracking B on
A.ProductType = B.ProductType
Inner Join tblProcessingDtl C on
C.ProductType = B.ProductType
Inner Join tblIngredientProduction D on
D.shift = C.shift
Inner Join tblUnprocessedProductTracking E on
D.shift = C.Shift
Where A.Date between @Fromdate and @todate
I have a situation where an agent has number of activities for a certain date range. If an agent has multiple activities within certain date range, I would like BALANCE BEFORE from the first activity and BALANCE AFTER from the last activity. Here is my current SQL query that returns the following data:
DECLARE @BeginDate Datetime
DECLARE @EndDate Datetime
Set @BeginDate = '05-1-2015'
Set @EndDate = '05-31-2015'
SELECT
a.AgentName,
R.BALANCEBEFORE,
[Code] ....
AGENTNAME BALANCE BEFORE BALANCE AFTER DATE
DOUGLAS 9738.75 9782.75 2015-05-11
DOUGLAS 9782.75 9804.75 2015-05-12
DOUGLAS 9804.75 9837.75 2015-05-13
In the sample data above, ideally I would like my query to return data as follow:
AGENTNAME BALANCE BEFORE BALANCE AFTER
DOUGLAS 9738.75 (from first activity) 9837.75 (from last activity)
Not sure how I can write sql query to accomplish this.
Hi all,I am getting this error when insert values from one table to another inthe first table the values are varchar (10). In the second they aredatetime. The format of the data is mm/dd/yyyy to be easily convertedto dates. The conversion in this case is implicit as indicated in SQLServer documentation. Here is my query:INSERT INTO Campaign (CampaignID, Name, DateStart, DateEnd, ParentID,ListID)SELECT mysqlfactiva.dbo.campaigns.campaign_id AS CampaignID,mysqlfactiva.dbo.campaigns.campaign_name AS Name,MIN(mysqlfactiva.dbo.programs.start_date) AS DateStart,MIN(mysqlfactiva.dbo.programs.end_date) AS DateEnd,NULL AS ParentID,NULL AS ListIDFROM mysqlfactiva.dbo.campaigns, mysqlfactiva.dbo.programsWHERE mysqlfactiva.dbo.campaigns.campaign_id =mysqlfactiva.dbo.programs.campaign_idGROUP BY mysqlfactiva.dbo.campaigns.campaign_id,mysqlfactiva.dbo.campaigns.campaign_name,mysqlfactiva.dbo.campaigns.descriptionUNIONSELECT program_id + 100000, program_name, start_date, end_date,campaign_id AS ParentID, NULL AS ListIDFROM mysqlfactiva.dbo.programsUNIONSELECT execution_id + 200000, execution_name, start_date,end_date, program_id + 100000 AS ParentID, NULL AS ListIDFROM mysqlfactiva.dbo.executionsUNIONSELECT wave_id + 300000, wave_name, start_date, end_date,mysqlfactiva.dbo.waves.execution_id + 200000 AS ParentID, NULL ASListIDFROM mysqlfactiva.dbo.waves, mysqlfactiva.dbo.executionsWHERE mysqlfactiva.dbo.waves.execution_id =mysqlfactiva.dbo.executions.execution_idI am referencing programs table two times. If I just select this all Iget all data I need. When doing insert I get a message:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value. The statement has been terminated.If I execute just first part of the query before first union, I insertdata fine:INSERT INTO Campaign (CampaignID, Name, DateStart, DateEnd, ParentID,ListID)SELECT mysqlfactiva.dbo.campaigns.campaign_id AS CampaignID,mysqlfactiva.dbo.campaigns.campaign_name AS Name,MIN(mysqlfactiva.dbo.programs.start_date) AS DateStart,MIN(mysqlfactiva.dbo.programs.end_date) AS DateEnd,NULL AS ParentID,NULL AS ListIDFROM mysqlfactiva.dbo.campaigns, mysqlfactiva.dbo.programsWHERE mysqlfactiva.dbo.campaigns.campaign_id =mysqlfactiva.dbo.programs.campaign_idGROUP BY mysqlfactiva.dbo.campaigns.campaign_id,mysqlfactiva.dbo.campaigns.campaign_name,mysqlfactiva.dbo.campaigns.descriptionAs soon as I use union I get the above error. This is very strangesince even when I execute the query using first union where the datescome from the same table 'programs' I get the error. Why I can insertfrom programs first time and can's second time?Any help will be appreciated.Thanks,Stan
View 1 Replies View RelatedI am in the midst of writing a query to return a range of product BIN LOCATIONS from a warehouse stock levels program.I know the start and end BIN LOCATIONS for the warehouse, e.g.: Start - #00000, and End - Z10000.However I cannot hard code these into the program, instead I want my operator to designate the first letter of both the start and end BINS locations, and then hit the 'go button'.Towards this end I have declared a couple of variables in my SQL, as follows -
Code:
declare @strBin varchar(10)
set @strBin = ''
if @strBin = ''
set @strBin = '#%'
declare @endBin varchar(10)
if @endBin = ''
set @endBin = 'z%'
My challenge is writing a relevant WHERE clause for my select statement, I have tried the following -
Code:
where BINLOCAT.BINLABEL between @strBin and @endBin
order by BINLOCAT.BINLABEL
Whilst the clause above does not cause any errors, neither does it return any results.My first thought is that the BETWEEN operator does not accept wildcards. But if this is correct then how do I go about allowing an operator to enter the start, and end BINS without typing the entire BIN string (e.g.: #00000)? I have tried >= @strBin and <= @endBin, but I am having a similar issue with no errors, and no data returned.
I have an Orders table which has the following fields:
OrderID (PK, int, auto increment, not null)
CustomerID (FK, int, null)
PaymentDate (datetime, null)
UserID (uniqueidentifier)
(and other irrelevant fields)
Basically, for a specific PaymentDate range (29th July 2014 - 26th August 2014, inclusive) I want to select all orders where they only appear once in the orders table based on the CustomerID, so I only want to know about them if they have a paid order (decided by PaymentDate not being null) in that date range, but also taking into account if they have ever had a paid order outside of that date range. I'll also be joining on to the aspnet_Users table to get the username assigned to that order.
I'm using PHP with SQLServer2k to create a page containing monthly counts of episodes at a facility occurring between two user selected month/year combinations. For instance, the user could select 10/2003 and 2/2004 and facility X and get a line for each month showing the count of episodes occuring in that month.
The problem is that the episode date is stored in three integer fields (epiday, epimonth, epiyear) and I'm having a terrible time getting them into a format where I can use them in a between statement.
I've tried evaluating the parts of the episode date seperately like:
where
(epimonth>=10 and epiyear=2003)
or
(epimonth<=2 and epiyear=2004)
and that works, but what happens when someone wants to see from 10/2002 to 2/2004?
Any suggestions on the best way to do this?
How do i round a float value to its previous and next tenth place?
Example:
1.34
Previous 10th : 0
Next 10th: 10
45.67
Previous 10th : 40
Next 10th: 50
Basically I am trying to generate range for my FLOAT Column
1.34
Req o/p: Between 0 and 10
45.67
Req o/p: Between 40 and 50
Thanks,
Prakash.P
Prakash.P
The secret to creativity is knowing how to hide your sources!
I have some contracts that run from different times:
jan 2007 to dec 2007
feb 2008 to jan 2009
I would look like to get all values between the months,
I can create it in the cube browser (see link),
but it would like to have it in mdx so it's automatic
calculated. I don't know if it's possible.
http://users.telenet.be/hanavan/question.jpg
thx in advance
is there a way to get a range of records using a query for example if only want rows from 10 to 20
View 7 Replies View RelatedMy goal is to select values from the same date range for a month on month view to compare values month over month. I've tried using the date trunc function but I'm not sure what the best way to attack this is. My thoughts are I need to somehow select first day of every month + interval 'x days' (but I don't know the syntax).In other words, I want to see
Select
Jan 1- 23rd
feb 1-23rd
march 1-23rd
april 1-23rd
,value
from
table
I have a order table which has a orderdate and despatchdate
i want to write a query in such a way that i want to get all the details from the table for a range specified date as the oderdate and despatchdate are user
interactable. I search the google to solve this problem but could not find a answer
Is it possible to create a constraint at the database level which implements the needs when cardinallity between two tables is definied as a range in the logical datamodel (examle 1 to 5-10). When yes, how can this be reached? When no, what is the best practise for these situations?
View 5 Replies View RelatedHello All,
I've been trying to get a range of values out of my SQL Server 2000 db without sucess. The field in question has the data type of char(8) and looks like this:
House_numbr_pub (leading spaces in front of each value)
140A
140
141
142
143
144
145
146
147
148
149
150
151
14500
Does anyone know of a sql statement that will return 140-150 including the 140A, but excluding the ' 14500'
Please Help,
James
What is the best way to do a where clause that includes a date range. Ex. WHERE date1 BETWEEN @Begin Date AND @EndDate. I want to include all of the @EndDate.
View 6 Replies View RelatedHi, I have a page working with not problem since 3 years, and now that we've moved our database from a SQL Server 2000 to SQL Server 7 and i receive this error everywhere a date is used.The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The error append on this line "While myReader.Read()" .. what can i do to solve this problem ?Thank you
View 1 Replies View RelatedHi,
I'm getting an error that reads "The conversion of a char data type to a datetime data type resulted in an out of range value data time value"
for the following view sql:
CONVERT (datetime, System . dbo.zStatus.MyDate)
MyDate is a char(8)
Any suggestions?
Thanks,
Denise
hi!
i have one datatable with date and some more fields are there in that. i want to query to return values from a particular date to another date. how can i do this? please help me!
thanks in advance!
I want to do a check to see if a number falls within a range specified by the user. Basically, they enter in a min and max value and I return a hit if a number falls inbetween.
I have having trouble with my SQL statement:
Code:
SELECT DISTINCT *
FROM Table
WHERE ( (0=0)
AND
(min.value <= Table.Value <= max.value) )
(This isn't my actual code, but just the logic)
It will return all the results everytime. Does anyone have any suggestions on what I could be missing here?
Thanks in advance!
Hi there:
This one's a bit tricky. I want to be able to take an IP address of a request on my website and find it in a table. Specifically, I need to be able to record IP address RANGES for search engines so that when they attempt to find a page that isn't there, I can programmatically send a 404 header instead of give them the human-friendly page (please don't make suggestions on this - I'm using PHP, etc., and can't send both a 404 header and a human-friendly page).
Anyway. Let's say a search engine has the IP range 33.33.0.0 through 33.33.255.255 (I made that up). if I receive a request from IP 33.33.101.221, how can I store ONE record (as either a regular expression or maybe multiple fields or somehow else) so that I can match that IP? I'm normally pretty good at figuring stuff like this out, but this one has me stumped for the moment.
All help is greatly appreciated.
I'll be posting a similar request on the PHP forum - I hope that's not considered cross-posting.
Jay