SKUUPGRADE Isn't Working...

May 16, 2007

Trying to upgrade SQL Server 2005 Standars to SQL Server 2005 Enterprise. I've tried every combination of the setup.exe params I can think of:



- start /wait setup.exe ADDLOCAL=SQL_Engine INSTANCENAME=MSSQLSERVER UPGRADE=SQL_Engine SKUUPGRADE=1



- start /wait setup.exe SKUUPGRADE=1



- start /wait setup.exe UPGRADE=SQL_Engine SKUUPGRADE=1



And several others. Nothing will actually work. Sometimes it complains that the option selected aren't valis for the version of SQL Server that I have installed. (SQL_Engine isn't a valid option?) I even tried listing every component (except, analysis services and notification services) in the ADDLOCAL option...



If it doesn't complain that the options are invalid, then shows me an install box with Client Components and Documentation options all with red X's. Doesn't show me the main components.



Anyone have any thoughts here?



Thanks.



J

View 4 Replies


ADVERTISEMENT

SKUUPGRADE Error ! Please Help

Apr 6, 2008



i am using Sqlexpress instance and want to upgrade it to standrad edition so i did the installation and installer told me that use this SKUUPGRADE=1



in command prompt to upgrade the sqlexpress instance but whenever i am running the command
its giving me an message that "Please go to control panel for installing the components"


what i am doing wrong, i have tried using every command but it always gives me this message

View 21 Replies View Related

SKUUPGRADE=1 FOR SQL SERVER 2005

Dec 6, 2007

I'm trying to reinstall SQL Server 2005 Developer Edtn 2005. I'm using a different cd and product key this time.

I've tried the command:
"start /wait setup.exe ADDLOCAL=SQL_Engine INSTANCENAME=MSSQLSERVER UPGRADE=SQL_Engine SKUUPGRADE=1 /qb"

The setup process starts, but after a while I get a message that says "The features specified are not valid for this edition of SQL Server".

When I simply write "start /wait setup.exe SKUUPGRADE=1 /qb",the setup begins but ends before the configuration starts.

What am I doing wrong?
How can I go forward?

Thanks,
Johan Lange

View 5 Replies View Related

SQL 2005 SKUUpgrade Certificate Error

Jan 29, 2008



I am trying to upgrade from SQL 2005 Standard to Enterprise in our Production environment. I am testing this currently on a VM to document and script the steps necessary what we would need to do during a maintenance window when I can have this server offline.

I am getting the following error:
'SQL Server Setup has encountered the following problem: [Microsoft][SQL Native Client][SQL Server]
The certificate cannot be dropped because one or more entities are either signed or encrypted using it.. To continue, correct the problem, and the run SQL Server Setup again.'

How can I find the entries, or remove them. We do not typically do this, and I explicitly didn't do this on the test server. I have tried this with 2 different VM builds and I'm getting the same error.

When going in to Control Panel, AddRemove Programs, SQL 2005 x64, Change, I can rerun the Suspended setup and it errors with the same Problem.

How can I get around this short of uninstalling and reinstalling the product? Is there another part of the SKUupgrade switch I need to append? I'm saving this as a batch file and running it from the command line.

Here is my command line entry:

Net use Z: /delete
Net use Z: "\<Fileserver>SoftwareMicrosoftSQL2005Enterprise Edition x64"
start /wait Z:serverssetup.exe ADDLOCAL=SQL_Engine INSTANCENAME=MSSQLSERVER UPGRADE=SQL_Engine SKUUPGRADE=1 /qb

View 1 Replies View Related

SKUUPGRADE Of Reporting Services Fails With Could Not Write Rssrvpolicy.config

Aug 10, 2007

Hi,

I'm using the System Center Essential 2007 VHD (http://go.microsoft.com/fwlink/?LinkId=91061). It has an SQL Server Express Edition with Advanced Services installed as a named instance, SCEVHDSCE. I tried to upgrade the SQL Server to Enterprise Edition, because some of the reports are not working in Express. I started the setup with the SKUUPGRADE=1 switch, it found the SQL Engine and Reporting Services components and offered to upgrade them. Upgrading the SQL Engine was successful, however the Reporting Services failed with the following error:

SQL Server Setup did not have the administrator permissions required to copy a file: C:Program FilesMicrosoft SQL ServerMSSQL.4Reporting ServicesReportServer
ssrvpolicy.config. To continue, verify that the file exists, and either grant administrator permissions to the account currently running Setup or log in with an administrator account. Then run SQL Server Setup again.

I checked the file, it exists and the current account (which is a domain administrator) has permissions. I stopped all services which could use the reporting services, rerun the setup now only for reporting services, but the same error occured. For the third try I started Filemon also, and it captured the following trace.
http://mit.bme.hu/~micskeiz/files/sql-rs-install-error.jpg
From this I guess the following: until row 442 it checks the existense of the target folder and creates the folder for the upgraded instance in C:Program FilesMicrosoft SQL ServerMSSQL.4. In step 443 probably it wants to copy the old config, but it searches them in the C:Program FilesMicrosoft SQL ServerMSSQL.2 folder, which should be the location of a default reporting services install. However, the setup of System Center Essentials installs its SQL Server Express Reporting Services in C:Program FilesSystem Center Essentials 2007Microsoft SQL ServerMSSQL.2, thus the setup fails because it is looking for rssrvpolicy.config in the wrong folder.
Do I see the problem correctly?
The setup log can be found here: http://mit.bme.hu/~micskeiz/files/SQLSetup0005_SCEVHD_RS.log

I tried to do a command line install, but I did not found a switch to tell the old location of Reporting Services. Neverthless I tried the following command:
D:>start /wait setup.exe ADDLOCAL=RS_Server INSTANCENAME=SCEVHDSCE UPGRADE=RS_
Server SKUUPGRADE=1 /qb
But the setup said that the requested component could not be found.


Any suggestions?

Thanks,
Zoltan
(I will be on vacation from next week, so I could not respond for a week.)

View 3 Replies View Related

Some Things Not Working In 2005 And Working In 2000

Mar 3, 2006

hi

I had a view in which I did something like this
isnull(fld,val) as 'alias'

when I assign a value to this in the client (vb 6.0) it works ok in sql2000 but fails in 2005.
When I change the query to fld as 'alias' then it works ok in sql 2005 .
why ?? I still have sql 2000 (8.0) compatability.

Also some queries which are pretty badly written run on sql 2000 but dont run at all in sql 2005 ???

any clues or answers ?? it is some configuration issue ?

Thanks in advance.

View 5 Replies View Related

ExecuteNonQuery - Add Working/Update Not Working

Jan 7, 2004

I am writing a pgm that attaches to a SQL Server database. I have an Add stored procedure and an Update stored procedure. The two are almost identical, except for a couple parameters. However, the Add function works and the Update does not. Can anyone see why? I can't seem to find what the problem is...

This was my test:


Dim cmd As New SqlCommand("pContact_Update", cn)
'Dim cmd As New SqlCommand("pContact_Add", cn)

Try
cmd.CommandType = CommandType.StoredProcedure

cmd.Parameters.Add("@UserId", SqlDbType.VarChar).Value = UserId
cmd.Parameters.Add("@FirstName", SqlDbType.VarChar).Value = TextBox1.Text
[...etc more parameters...]
cmd.Parameters.Add("@Id", SqlDbType.VarChar).Value = ContactId

cn.Open()
cmd.ExecuteNonQuery()

Label1.Text = "done"
cn.Close()

Catch ex As Exception
Label1.Text = ex.Message
End Try


When I use the Add procedure, a record is added correctly and I receive the "done" message. When I use the Update procedure, the record is not updated, but I still receive the "done" message.

I have looked at the stored procedures and the syntax is correct according to SQL Server.

Please I would appreciate any advice...

View 2 Replies View Related

WHERE NOT IN Not Working

Feb 23, 2008

Original suggestion for my problem was -  Select * from TableA where ID not in ( Select ID from TableB)
When I run the query below using the IN operator I get 227 records returned but when I use NOT IN I get zero records when I expect well over 10,000.  What am I missing?
using SQL 2000 server 
 SELECT    LinksInfo.L_ID, LinksInfo.C_ID, Companies.C_CompanyName, Companies.C_Email, Companies.C_CompanyEmailFROM         LinksInfo INNER JOIN Companies ON LinksInfo.C_ID = Companies.C_IDWHERE     (LinksInfo.L_ID IN           (SELECT ZL_ID FROM Location_Zip))
ZL_ID is not a primary key in Location_Zip

View 2 Replies View Related

Why Is This Not Working

Mar 25, 2008

Hello again,
I think im missing something here, i just cant find out what it is.
I have a temp table:
CREATE TABLE #tempSearch(tempID BIGINT IDENTITY(1,1) PRIMARY KEY,username NVARCHAR(20) COLLATE Finnish_Swedish_CI_AS,lastlogin DATETIME,signupdate DATETIME)
Now i am trying to retrieve some data for each user that is inside this tempSearch list and have an id over xxx (xxx = the value of the parameter @first_id):
SELECT @sql = 'SELECT profile_publicinfo.username, profile_publicinfo.gender, profile_publicinfo.signupdate, profile_profilephoto.imageurl, profile_profilephoto.alttext, settings_username.color, profile_publicinfo.lastloginFROM #tempSearch INNER JOIN dbo.profile_publicinfo ON profile_publicinfo.username = #tempSearch.usernameINNER JOIN dbo.settings_privateinfo ON settings_privateinfo.username = profile_publicinfo.usernameFULL OUTER JOIN dbo.profile_coolfacts ON profile_coolfacts.username = profile_publicinfo.username FULL OUTER JOIN dbo.profile_profilephoto ON profile_profilephoto.username = profile_publicinfo.usernameFULL OUTER JOIN dbo.settings_username ON settings_username.username = profile_publicinfo.usernameWHERE (profile_publicinfo.username IN (SELECT username FROM #tempSearch))AND #tempSearch.tempID >= @first_id'
SELECT @paramlist = '@first_id int'EXEC sp_executesql @sql, @paramlist, @first_id
I need to get the tempID from the tempSearch table in order to compare it with @first_id
When i run this i get the same username repeated like 30 times then it moves over to the next, when i debug the #tempSearch it looks fine, just the users that are suppose to be there.

View 1 Replies View Related

How Do I Know If It Is Working?

Jun 17, 2004

Hi
I think I have installed MSDE sucessfully. The new servie is running, but how can I test ifit is working? Can I place my files anywhere on the system?
All help appreciated

View 1 Replies View Related

Anyone Know Why This Isn't Working...?

Apr 25, 2006

I am using the following C#...


SQLXMLBULKLOADLib.SQLXMLBulkLoad3Class loader = new SQLXMLBULKLOADLib.SQLXMLBulkLoad3Class();
loader.ConnectionString = "PROVIDER=SQLOLEDB; Server=(local); database=TestDB; user id=test; password=password";
loader.ErrorLogFile = "C:log.txt";
loader.SchemaGen = true;
loader.SGDropTables = true;
loader.CheckConstraints = true;
loader.Execute(
"C:xsd.xsd"/* this file below */,
"C:xml.xml"
);


To generate tables in the database using the following xml schema...
(file: xsd.xsd...)



























































































My problems is that it doesn't generate the tables and I am following the SQLXML2.0 documentation as closely as possible.

Does anyone know what I have to do to get it to generate the tables? Running it doesn't even produce an error.

Cheers,

Matt.

View 1 Replies View Related

SPs Not Quite Working

May 3, 2002

OK so I'm using dynamic sql to enable me to have a variable for the order by, but now it's giving me the following error

Syntax error converting character string to smalldatetime data type.

Any help is very much appreciated

Code follows

CREATE PROCEDURE spBattingAve1
@cid datetime,
@cid1 datetime,
@sid nvarchar(10)
AS

DECLARE @query nvarchar(4000)

SET @query = 'SELECT MAX(t_batting.runs) AS BestRuns,
COUNT(t_batting.dnb) AS DidNotBat, t_player.surname, t_player.firstname,
t_batting.player_id,
Sum(t_batting.runs) as SumOfruns, COUNT (*) AS Games,
COUNT (t_batting.notout) as nout,
(Sum(runs)/(COUNT(*)-(COUNT(notout)+COUNT(dnb)))) as AverageRun,
(COUNT(*)-COUNT(dnb)) AS Innings,
(SELECT COUNT(*) FROM t_batting inner join t_game on t_batting.game_id = t_game.game_id WHERE (t_batting.player_id = t_player.player_id) AND runs >= 50 AND runs <100 and t_game.date >= '+@cid+' And t_game.date <= '+@cid1+' GROUP BY t_batting.player_id) AS Overfifty,
(SELECT COUNT(*) FROM t_batting inner join t_game on t_batting.game_id = t_game.game_id WHERE (t_batting.player_id = t_player.player_id) AND runs >= 100 and t_game.date >= '+@cid+' And t_game.date <= '+@cid1+' GROUP BY t_batting.player_id) AS Overton
FROM t_batting
INNER JOIN t_game ON t_batting.game_id = t_game.game_id
INNER JOIN t_player ON t_batting.player_id = t_player.player_id
WHERE t_batting.player_id = t_player.player_id
AND t_game.date >= '+@cid+' And t_game.date <= '+@cid1+'

GROUP BY t_batting.player_id, t_player.surname, t_player.firstname, t_player.player_id
HAVING (COUNT(*)-(COUNT(notout)+COUNT(dnb))) <> 0
order by '+@sid+'
DESC'

exec (@query)

View 1 Replies View Related

How Come This Not Working?

Jun 21, 2001

In SQL 7.0, when i use the below query in query analyzer, I got an error message. why?
======================

Set Identity_insert on

UPDATE Table1
SET no = 3
WHERE no = 4

Set Identity_insert off
go


Error message
=============
Server: Msg 156, Level 15, State 1, Line 1
Incorrect syntax near the keyword 'on'.
Server: Msg 156, Level 15, State 1, Line 7
Incorrect syntax near the keyword 'off'.

View 2 Replies View Related

/3GB Not Working

May 1, 2006

Hi,

I am on a box with 4 GB of memory that only runs SQL Server. SQL Server is using 1.7 GB as per task manager. There are a lot of databases on this box. I looked at the boot.ini and /3GB was not set. I have done this at least 50 times before: turn on the /3GB switch and SQL Server will use up to 2.7 GB per task manager. (I know it is actually 2GB and 3GB but it seems that in task manager it shows up as 1.7-1.8 and 2.7-2.8)

Anyway back to the story. So I set /3GB, rebooted the server and SQL Server still only consumes up to 1.7GB. I realize that SQL Server might not actually need more memory, but I have a distinct feeling that it wants more but is being constrained; that is, the the /3GB switch is not working. More relevant information:

1) the boot.ini line:
multi(0)disk(0)rdisk(0)partition(1)WINNT="Microsoft Windows 2000 Advanced Server" /fastdetect /3GB

2) max server memory (MB) = 3000

3) min server memory (MB) = 3000

4) awe enabled = 0

5) @@version = 8.00.2039 which is SQL Server 2000 SP4


Has anyone seen this before? Any ideas on how to troubleshoot this?

View 1 Replies View Related

Min Not Working

Oct 16, 2006

Hi all:
Because me not this functioning the following one query.

simply me not the function respects min, because?, that I am doing badly?

Select Distinct(Min(c.gentime)),
a.CardNumber,a.CardHolderId,a.Deleted,
b.RecordId,b.FirstName,b.LastName,b.Deleted,b.Note 4,
c.param3,c.param2,c.param1,c.recvtime,c.gentime,c. link1,c.link2,c.link3,c.deleted,c.recordid,c.seqid
From Card a,
CardHolder b,
History c
Where ((a.cardholderid = b.recordid)And(b.recordid=c.link3))
And(a.Deleted = 0)And (b.Deleted = 0)And(c.deleted = 0)
And(a.cardnumber Between 1500 And 1600)
And(b.note4 <> 'Mantenimiento')
And(c.RecvTime >= CONVERT(DATETIME, '2006-10-01 00:00:00', 102))And(c.RecvTime <= CONVERT(DATETIME, '2006-10-12 23:59:59', 102))
And(c.Link1=10)
Group By a.CardNumber, a.CardHolderID, a.Deleted,
b.RecordID, b.Deleted, b.FirstName, b.LastName, b.Note4,
c.Deleted, c.RecvTime, c.GenTime, c.Param1, c.Param2, c.Param3, c.Link1, c.Link2, c.Link3, c.Link4,c.recordid,c.seqid
Order By a.CardNumber,c.recvtime




Thanks.:confused:

View 6 Replies View Related

Why This SP Is Not Working??????????

Mar 2, 2006

hi..why this SP is not working that giving me error like

Server: Msg 2714, Level 16, State 1, Procedure test_E, Line 12
There is already an object named '#emp' in the database.

my one of the developer used this every where... what should i do if i dont wanna to change any of the code...i wanna some how work this SP...

create proc test_E
as

select * into #emp
from (select * from emp) p

select * from #emp

drop table #emp

select * into #emp
from (select * from dept) p

select * from #emp

drop table #emp


T.I.A

Papillon

View 5 Replies View Related

Not Working ......

Apr 11, 2006

select replace(local_notes,char(13),' ') from locals


Not Working ......

View 12 Replies View Related

If...else Not Working

Sep 20, 2006

declare @table table(ad_num varchar(20), ad_str1 varchar(20))

insert @table
select '20', '20 apple avenue' union all
select '20', 'apple avenue'

select * from @table

if (select * from @table where substring(ad_str1, 1, 1) like '[0-9]'))

print 'address starts with a number'
else
print 'address starts with a letter'



i want to write a code that prints a msg if the string starts with a number else print another msg.

View 20 Replies View Related

How Do I Know What I'm Working IN

Sep 26, 2007

In SQL2000 Enterprise manager, there is always an indication of WHICH server & database an object is opened from when it has focus.

So when I'm working on the same table in test and production servers I can tell at a glance what it belongs to.

I cannot seem to duplicate this in any way in SQL Manager 2005 Express which could lead to all sorts of trouble and really slows me down.

Have I missed something really simple in setup or use of the product?

TIA,
Richard

View 2 Replies View Related

How It Is Working

Nov 20, 2007

Dear All,
please explain me what is going inside with this query....

selectchar(94 * RAND() + 33)

i saw this in FAQ, combining several same queries to generate random passwords.


i didn't get what is char(94* rand()+33)


thank you very much for your valuble time

Vinod
Even you learn 1%, Learn it with 100% confidence.

View 10 Replies View Related

Between Not Working

Feb 28, 2008

Hi,
can i anybody help the below query for the o/p

function:date_format(getdate(),'mmm-yy') which will return FEB-08

when iam querying the below statement data is not getting fetching .can anybody correcy it??

select * from
Rev_fbp_posted_dim_tb_tmp2
where dbo.Date_Format(fb_voucher_date,'MMM-YY') between NOV-07' and 'DEC-07'

View 1 Replies View Related

AVG Not Working

Mar 28, 2008

I would like to get the average of a field but I am not sure if I am doing it correctly.

SELECT dbo.VIEW2.Den AS Den2, CASE WHEN VIEW1.Den = VIEW2.Den THEN 1 ELSE 0 END AS Den3, dbo.VIEW2.ID, AVG(dbo.VIEW2.Den) AS Den4
FROM dbo.VIEW1 CROSS JOIN
dbo.VIEW2
WHERE (dbo.VIEW2.ID = '1')

Here is the error I am getting: Column dbo.View2.Den is invalid in the SELECT list because it is not an aggregate function and there is no Group BY CLause.

Thanks for the help

View 6 Replies View Related

How To Tell If AWE Is Actually Working?

Jul 23, 2005

How can I verify that AWE is actually working? The server is SQL 2000EE on W2KAS with the /pae switch.I've allocated 5000Mb (5Gb) for SQL but Performance monitor says theworking set for the sqlservr process is only 91Mb (it started out ataround 87Mb a couple of days ago and seems to be creeping up)."committed bytes" for the server is about 5.6 Gb out of ~6Gb so there'sa whole pile of memory going somewhere.The error log says "Address Windowing Extensions enabled" (sp_configindicates a "1" for this as well). The "max server memory" item says5000 Mb for its "running" value so within the SQL Server things appearto be correct.The server does seem to be performing better but it's hard to decide ifthat's because of AWE or just the fact that it was rebooted (it hadn'tbeen in a while).- Martin

View 3 Replies View Related

Working Wth XML

Jul 20, 2005

I've built an application that relies pretty heavily on XML to enableflexible creation of data entry forms and storage of the data enteredinto those forms. Currently, it stores data as an XML document in anntext field. This is great because it allows me a great deal offlexibility in creating fields. However, I need to implement searchingand sorting of that data and I don't know how to do this in an efficientmanner.Currently the data is stored in a format similar to this:<form><fieldname>fieldvalue</fieldname><listfieldname><items><item><label>displaytext</label><value>itemvalue</label></item></items></listfieldname></form>Is there any way to perform searches on data like this, i.e. to searchthe "fieldvalue" in <fieldname> or "itemvalue" in <value>?If there isn't a way to do this, I'm willing to re-structure thedatabast architecture, though the solution would still need to allow thesame kind of flexibility that the XML solution does.Any ideas?Thanks,Kelly

View 4 Replies View Related

AWE Working?

Apr 9, 2007

Hi all,



This is a question related to AWE settings. I am on windows 2003 ent version with SQL Server 2005 std version. I have configured SQL Server to use AWE and min memery as 22G and max as 26G (I have 32G in total as physical memory). I do see the message in log as "Windows Address ... Enabled", but when I am using performance monitor to view total memory in kb for SQL Server, it never starts at 22G (usually at 1G). And I doubt why? The account I am running SQL Server is an admin account, so it can definitely locked down the pages in memory. Also, I do think AWE is working somehow, after several hours in running, the total memory will up to 8, 9 or 11G. So, apparently, it is over 2G per process limitation. I still want to know.



1. Is my AWE setting working?

2. If not, how to fix that?

3. How to confirm how many memory is actaully using by SQL Server?



Thanks,

NIng

View 5 Replies View Related

Look Up Not Working

Apr 24, 2008

I have a source table in which one of column is numeric data type. I have to do a lookup for this column to a table column which is float data type. So I change this float data type to numeric by convert function. You when I execute the package, if I use data viewer I always see that look up column value is always null. Can any one give me some suggestion please?

Thanks...

View 4 Replies View Related

EXCEPT Not Working

Aug 7, 2006

TIA. Here is my situation: I have two tables that I need to find the perform an EXCEPT op on.

Table1: ToBeAddedCodes
CodeID - varchar(14)

Table2: ExistingCodes
ExistingCodeID - varchar(14)
DateIssued - datetime
Active - bit
...&c

I perform the following command, to no avail:

select CodeID
from ToBeAddedCodes
intersect
select ExistingCodeID
from ExistingCodes

Specifically, the following error appears:

Msg 156, Level 15, State 1, Line 40
Incorrect syntax near the keyword 'intersect'.

I don't understand what the issue is... Please help. Thanks.

View 11 Replies View Related

Query Not Working Right!

Jul 15, 2006

Hello All, I am probably doing something small with my query that is causing me pain, but somehow the query is acting funky. What I am trying to do is do a search statement to find documents from a table. But the catch is it is taking three parameters. The searchString, Type and the Location (where the user who is searching belongs to). When I run my query I get all documents where the location and type is correct. But the searchstring does not even work.For example: Lets say I have 3 documents for a LocationID of '2' and the Type for all documents is '0'. Now imagine that the name of the documents as follow: Doc1 = a , Doc2 = b, Doc3 = c. So now a user wants to search for all docs that starts with 'a'. Remember, Loc ID = '2' and Type = '0'. The result of the query should be Doc1 and only Doc1. But somehow I am getting all three Docs b/c they belong and are the type of the give parameters. Any help would be greatfull. Query:
SELECT Client.FirstName, Client.LastName, Client.MiddleName, Client.LocID, ClientDocuments.DocID, ClientDocuments.DirName, ClientDocuments.LeafName, ClientDocuments.Type, ClientDocuments.CreatedByUser, ClientDocuments.CreatedDate FROM Client INNER JOIN ClientDocuments ON Client.ClientID = ClientDocuments.ClientID WHERE ClientDocuments.Type = '0' AND Client.LocID = '3' AND ([ClientDocuments.LeafName] LIKE '%' + @SR + '%' OR [Client.SSN] LIKE '%' + @SR + '%' OR [Client.LastName] LIKE '%' + @SR + '%' OR [Client.FirstName] LIKE '%' + @SR + '%' OR [Client.MiddleName] LIKE '%' + @SR + '%' )

View 5 Replies View Related

My Query Is Not Working.

Jul 31, 2006

I've gotten spoiled with all these query builders.  Now in SQL server management studio express its gone.  I don't understand whats wrong with their query....any help would be appreciated.

SELECT [Products].myID, [ProductDetails].ShortName
FROM [Products]
INNER JOIN [ProductDetails]
ON [Products].DetailID = [ProductDetails].myID
 
Parse comes back asCommand(s) completed successfully.
Execute comes back asMsg 208, Level 16, State 1, Line 1Invalid object name 'Products'.

View 2 Replies View Related

Working With App_Data

Nov 6, 2006

Hi All,
I have this error:
"System.Data.SqlClient.SqlException: Cannot open user default database. Login failed."
It occurred when my application try to access the App_Data, because I use Profile to store user data. I can connect to SQL Server just fine, but failed to access the App_Data. How to change the SQLExpress (because I assume that App_Data store its data in SQLExpress) username and password within the application?
TIA

View 2 Replies View Related

Working With Mssql?

Dec 12, 2006

Are the sql sentences in mssql identical to mysql? Can someone please show me the easiest way, how to connect to database in asp.net, cause i have no idea how to do that? What do you recommend, should i use mysql or mssql?

View 1 Replies View Related

Where Clause Not Working

Dec 27, 2006

I'm trying to use this WHERE Clause in a stored procedure, it is not working. I'm hoping someone can look at it and tell me if there is a better way or what might be causing it to fail.(CONVERT(varchar, tblTasks.ReminderDate, 101) BETWEEN CONVERT(varchar, GETDATE() - 7, 101) AND
CONVERT(varchar, GETDATE() + 7, 101)) 

View 1 Replies View Related

RAISERROR Not Working

Jan 3, 2007

I have used RAISERROR on some of our pages before, and it worked fine.  Now I have a page that has a formview with a sqldatasource that does an insert.  If the value for a certain field exists already in the table, I am trying to use RAISERROR('message', 15, 1) to have a popup error.  The page does a redirect in the iteminserted event.  When I try to insert with data that should cause an error, it doesn't insert into the database, but I don't see an error.  The page just redirects...  any ideas what could be done to fix this?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved