SP Skips Execution Of Child SP When Called From C#
Sep 14, 2005
Hello all. I have a stored procedure that seems to skip the execution of an entire line of code (which happens to be a call to execute another stored procedure), but ONLY if it is being used from C# (using the System.Data.SqlClient namespace... object: SqlCommand, etc).
Basic structure:
Event SP: top-most parent
-->Calls UpdateXs SP: This is the SP that will not call his child SP
----->Calls UpdateX: This is the SP that is being ignored when called from .NET (In a loop, each iteration, max iterations 10).
(1) I can call the top-most stored procedure (Event SP) with the same arguments in Query Analyzer and all SP's will execute.
(2) I can call UpdateXs SP with the same arguments that are being passed to it from Event SP in the Query Analyzer, and again, it's child sp executes (UpdateX).
(3) I can also call the last child (UpdateX) directly in Query Analyzer with the same arguments that are passed in production (from executing the top-most parent in C#), and it executes correctly.
I'm positive that at no point the last child (UpdateX) is being passed NULL values. I made debug tables and before execution of an SP from within another SP, I store all the arguments in a debug table--none are null. Also, to figure out what was wrong with the last child (UpdateX) , the first statement in inserts into another debug table, just to show that that execution has made it into the sp--when the top parent is called from C#, it doesn't insert into my table (doesn't execute).
There are statements inside Event SP that execute after the sp call to UpdateXs SP. These statement always execute. Also, there are statements inside UpdateXs SP that execute after the sp call to the last child. These statement always execute too.
I am now clueless. I had developed & debugged all sp's in Query Analyzer before trying to use it live (with the C#). It's always fine in Query Analyzer, but ALWAYS skips the last sp in production.
Is there some fundamental principle I am missing here in MS SQL stored procedures? I am only 3 levels deep in SP calls, so I didn't think that would be an issue (I have made SP's that went a LOT deeper in calls than that in the past with no issues).
Any insight much appreciated. Thanks in advance.
View 2 Replies
ADVERTISEMENT
Oct 26, 2006
So I have a parent package that calls another package using the Execute Package Task. When I run the child it runs fine but when I run it from the parent i get this msg...Any ideas?
Error: 0xC00220E4 at Execute VR Account Load: Error 0xC0012050 while preparing to load the package. Package failed validation from the ExecutePackage task. The package cannot run.
View 4 Replies
View Related
Oct 29, 2007
I have an SSIS package (TransAgentMaster) that I recently modified to include a call to a child package via the file system. The child package creates a text file. When I run the package in dev studio then the child package/text file is produced.
I then imported the TransAgentMaster as a stored packagesfilesystem package into SQL SSIS and executed the package. The child package produced the text file.
I then ran the SQL Server Agent to see if the child package would work and it did not generate the text file. Thus after updating a SSIS package importing the package into SSIS the job that calls the package will not call the child package. Please not that the TransAgentMaster package calls 7 children packages €¦ just not my new one.
Any thoughts why the agent will not run the child newly crated childe package?
View 3 Replies
View Related
Sep 23, 2007
I have a child package which is executed several times within the same SSIS ETL. I have placed a break point on one of the child package's tasks, set to trigger on a PreExecute() event. The first time the child package is invoked, the breakpoint is triggered. However, on each successive invocation the breakpoint is ignored. Does anybody know if this behaviour is normal? Thanks in advance!
View 1 Replies
View Related
Aug 24, 2007
I have a parent package "A", I also have 4 child packages "B","B1","B2",B3"
In BIDS, I created a file connection in the package "A" to connect to the child packages. So whenever I want to run B1 or B2, I change the path in the file connection to point to B1 or B2 and so on. Since the developement environment is File system this works perfectly fine.
But in the Test / Production environment all packages are stored in the Sql server. How can I paramaterize the child package connection so that I can use configuration / variables to select which child package to execute.
Thanks
View 3 Replies
View Related
Jul 20, 2005
Has this happened to anyone else?I have a large job and all the queries run fine when usedindividually, but in the job, SQL says completed with success but intwo cases the queries did not run. One of them is even ridiculouslysimple: DROP TABLE tblMyTable, etc.
View 1 Replies
View Related
May 21, 2007
Hi,
I created a package which passes some infornmations( through parameters) to its child package.
I need to do some processing in parent package based on execution status of child package.i.e.
if child fails then some operation and if child succeeds then other operation.
To determine the status of execution of child package I am using two differnt constraint ..one constraint is having value "Success" and other having value "Failure".
My problem is that when child packge is executed successfully the constraint with value = "Success" works properly but when child fails the constraint with value "Failure" does not work.
-Prashant
View 4 Replies
View Related
Dec 6, 2007
Hi Guys,
My little bulk insert is only bringing every second row of a CSV file. this is not good as i need every row.
My SQLcommand is thus.
InsertCommand="BULK INSERT TBL_Unitel_services FROM 'C:/webroot/servicedesk/csvs_Services/csv.csv' WITH (FIRSTROW = 1, FIELDTERMINATOR = ',', ROWTERMINATOR = '', MAXERRORS = 0) "
View 2 Replies
View Related
Sep 1, 2006
I am in the process of porting all of my Access 2003 databases to SQL Server. I started with my smallest database, which has only two tables. I have run the wizard five times, with different settings, but every time it only imports the table structure without the data.
Can anyone tell me what I'm missing here? Also, I have created several databases which I can't use, named InstructorsSQL, InstructorsSQL1, InstructorsSQL2, etc. I deleted the database files, but the names are apparently still in the system, since SQL Server won't allow me to use the same name again. How can I get rid of these old names.
Thanks,
Mike
View 3 Replies
View Related
Jul 25, 2014
Basically i have three Tables
Request ID Parent ID Account Name Addresss
1452 1254789 Wendy's Atlanta Georgia
1453 1254789 Wendy's Norcross Georgia
1456 1254789 Waffle House Atlanta Georgia
Bid_ID Bid_Type Bid_Volume Bid_V Bid_D Bid_E Request_ID Parent ID
45897 Incentive 10 N/A N/A N/A 1452 1254789
45898 Incentive 10 N/A N/A N/A 1453 1254789
45899 Incentive 10 N/A N/A N/A 1456 1254789
Bid_Number Bid_Name Request_ID Parent ID
Q789456 Wendy'Off 1452 1254789
Q789457 Wendy'Reba 1452 1254789
Q789456 Wendy'Off 1453 1254789
Q789457 Wendy'Reba 1453 1254789
Q789456 Wendy'Off 1456 1254789
I want the Result
Parent ID Bid_Type Bid_Volume Bid_V Bid_D Bid_E AutoGeneratedCol
1254789 Incentive 10 N/A N/A N/A 1
1254789 Incentive 10 N/A N/A N/A 2
Bid Number AutoGeneratedCol_Link
Q789456 1
Q789457 1
Q789456 2
Request ID AutoGeneratedCol_Link
1452 1
1453 1
1456 2
View 1 Replies
View Related
Oct 22, 2007
............child |parent|.............a1 |a | .............a2 |a |.............a11 |a1 |.............b1 |b |.............b11 |b1 |.............b111 |b1 |.............
Here is my table I want to get all childs of "a" ie {a1,a11,a2}I mean recursivelyie child,chid of child ,child of child of child ........etc up to any extentet the table containHow can i for mulate the select querry?
View 3 Replies
View Related
Jun 26, 2015
I have a table with below kind of data,
DECLARE @TBL TABLE (ItemId INT IDENTITY(1,1), ItemName NVARCHAR(20), ItemDate DATE, ParentItemName NVARCHAR(20), ItemOrder INT, ReportId INT)
INSERT INTO @TBL (ItemName, ItemDate, ParentItemName, ItemOrder, ReportId)
VALUES ('Plan', '2015-06-01', NULL, 1, 20),('Design', '2015-06-01', NULL, 2, 20),('Test', '2015-06-20', NULL, 3, 20),('Complete', '2015-06-30', NULL, 4, 20),
('Design child A', '2015-06-02', 'Design', 1, 20), ('Design child B', '2015-06-01', 'Design', 2, 20),
('Test child A', '2015-06-10', 'Test', 1, 20), ('Test child B', '2015-06-09', 'Test', 2, 20), ('Test child C', '2015-06-08', 'Test', 3, 20),
('Test grand child A', '2015-06-08', 'Test child B', 1, 20), ('Test grand child B', '2015-06-08', 'Test child B', 2, 20)
select * from @TBL
Here I want,
1. to display all parent with ORDER BY ItemOrder (no need to sort by ItemDate)
2. display all child row right after their parent (ORDER BY ItemOrder if ItemDate are same, else ORDER BY ItemDate)
3. display all grand child row right after their parent (ORDER BY ItemOrder if ItemDate are same, else ORDER BY ItemDate)
Looking for below output ...
View 3 Replies
View Related
Jul 23, 2005
Hi,I am trying to use BULK INSERT with format file. All of our data hasfew bytes of header in the data file which I would like to skip beforedoing BULK INSERT.Is it possible to write format file to skip these few bytes ofheader before doing BULK INSERT? For example, I have a 1 GB data filewith 1000 byte header. Except for first 1000 bytes, rest of the data isgood for BULK INSERT.Thanks in advance. Sorry if it is really a dumb question as I am newto BULK INSERT and practicing still.Bob
View 7 Replies
View Related
Nov 1, 2007
I have table "Clients" who have associated records in table "Mailings"
I want to populate a gridview using a single query that grabs all the info I need so that I may utilize the gridview's built in sorting.
I'm trying to return records containing the next upcoming mailing for each client.
The closest I can get is below:
I'm using GROUP BY because it allows me to return a single record for each client and the MIN part allows me to return the associated record in the mailings table for each client that contains the next upcoming 'send_date'
SELECT MIN(dbo.tbl_clients.client_last_name) AS exp_last_name, MIN(dbo.tbl_mailings.send_date) AS exp_send_date, MIN(dbo.tbl_mailings.user_id) AS exp_user_id, dbo.tbl_clients.client_id, MIN(dbo.tbl_mailings.mailing_id) AS exp_mailing_idFROM dbo.tbl_clients INNER JOIN
dbo.tbl_mailings ON dbo.tbl_clients.client_id = dbo.tbl_mailings.client_idWHERE (dbo.tbl_mailings.user_id = 1000)GROUP BY dbo.tbl_clients.client_id
The user_id set at 1000 part is what makes it rightly pull in all clients for a particular user. Problem is, by using the GROUP BY statement I'm just getting the lowest 'mailing_id' number and NOT the actual entry associated with mailing item I want to return. Same goes for the last_name field. Perhaps I need to have a subquery within my WHERE clause?Or am I barking up the wrong tree entirely..
View 7 Replies
View Related
May 19, 2015
Given the sample data and query below, I would like to know if it is possible to have the outcome be a single row, with the ChildTypeId, c.StartDate, c.EndDate being contained in the parent row. Â So, the outcome I'm hoping for based on the data below for ParentId = 1 would be:
1 2015-01-01Â 2015-12-31 AAÂ 2015-01-01Â 2015-03-31Â BBÂ 2016-01-01Â 2016-03-31Â CCÂ 2017-01-01Â 2017-03-31Â DDÂ 2017-01-01Â 2017-03-31
declare @parent table (Id int not null primary key, StartDate date, EndDate date)
declare @child table (Id int not null primary key, ParentId int not null, ChildTypeId char(2) not null, StartDate date, EndDate date)
insert @parent select 1, '1/1/2015', '12/31/2015'
insert @child select 1, 1, 'AA', '1/1/2015', '3/31/2015'
[Code] .....
View 6 Replies
View Related
Aug 23, 2007
after moving off VS debugger and into management studio to exercise our SQLCLR sp, we notice that the 2nd execution gets an error suggesting that our static SqlCommand object is getting reused from the 1st execution (of the sp under mgt studio). If this is expected behavior, we have no problem limiting our statics to only completely reusable objects but would first like to know if this is expected? Is the fact that debugger doesnt show this behavior also expected?
View 4 Replies
View Related
Dec 7, 2005
Hi I am slowly getting to grips with SQL Server. As a part of this, I have been attempting to work on producing more efficient queries. This post is regarding what appears to be a discrepancy between the SQL Server execution plan and the actual time taken by a query to run. My brief is to produce an attendance system for an education establishment (I presume you know I'm not an A-Level student completing a project :p ). Circa 1.5m rows per annum, testing with ~3m rows currently. College_Year could strictly be inferred from the AttDateTime however it is included as a field because it a part of just about every PK this table is ever likely to be linked to. Indexes are not fully optimised yet. Table:CREATE TABLE [dbo].[AttendanceDets] ([College_Year] [smallint] NOT NULL ,[Group_Code] [char] (12) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,[Student_ID] [char] (8) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,[Session_Date] [datetime] NOT NULL ,[Start_Time] [datetime] NOT NULL ,[Att_Code] [char] (1) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ) ON [PRIMARY]GO CREATE CLUSTERED INDEX [IX_AltPK_Clust_AttendanceDets] ON [dbo].[AttendanceDets]([College_Year], [Group_Code], [Student_ID], [Session_Date], [Att_Code]) ON [PRIMARY]GO CREATE INDEX [All] ON [dbo].[AttendanceDets]([College_Year], [Group_Code], [Student_ID], [Session_Date], [Start_Time], [Att_Code]) ON [PRIMARY]GO CREATE INDEX [IX_AttendanceDets] ON [dbo].[AttendanceDets]([Att_Code]) ON [PRIMARY]GOALL inserts are via an overnight sproc - data comes from a third party system. Group_Code is 12 chars (no more no less), student_ID 8 chars (no more no less). I have created a simple sproc. I am using this as a benchmark against which I am testing my options. I appreciate that this sproc is an inefficient jack of all trades - it has been designed as such so I can compare its performance to more specific sprocs and possibly some dynamic SQL. Sproc:CREATE PROCEDURE [dbo].[CAMsp_Att] @College_Year AS SmallInt,@Student_ID AS VarChar(8) = '________', @Group_Code AS VarChar(12) = '____________', @Start_Date AS DateTime = '1950/01/01', @End_Date as DateTime = '2020/01/01', @Att_Code AS VarChar(1) = '_' AS IF @Start_Date = '1950/01/01'SET @Start_Date = CAST(CAST(@College_Year AS Char(4)) + '/08/31' AS DateTime) IF @End_Date = '2020/01/01'SET @End_Date = CAST(CAST(@College_Year +1 AS Char(4)) + '/07/31' AS DateTime) SELECT College_Year, Group_Code, Student_ID, Session_Date, Start_Time, Att_Code FROM dbo.AttendanceDets WHERE College_Year = @College_YearAND Group_Code LIKE @Group_CodeAND Student_ID LIKE @Student_IDAND Session_Date <= @End_DateAND Session_Date >=@Start_DateAND Att_Code LIKE @Att_CodeGOMy confusion lies with running the below script with Show Execution Plan:--SET SHOWPLAN_TEXT ON--Go DECLARE @Time as DateTime Set @Time = GetDate() select College_Year, group_code, Student_ID, Session_Date, Start_Time, Att_Code from attendanceDetswhere College_Year = 2005 AND group_code LIKE '____________' AND Student_ID LIKE '________'AND Session_Date <= '2005-11-16' AND Session_Date >= '2005-11-16' AND Att_Code LIKE '_' Print 'First query took: ' + CAST(DATEDIFF(ms, @Time, GETDATE()) AS VarCHar(5)) + ' milli-Seconds' Set @Time = GetDate() EXEC CAMsp_Att @College_Year = 2005, @Start_Date = '2005-11-16', @End_Date = '2005-11-16' Print 'Second query took: ' + CAST(DATEDIFF(ms, @Time, GETDATE()) AS VarCHar(5)) + ' milli-Seconds'GO --SET SHOWPLAN_TEXT OFF--GOThe execution plan for the first query appears miles more costly than the sproc yet it is effectively the same query with no parameters. However, my understanding is the cached plan substitutes literals for parameters anyway. In any case - the first query cost is listed as 99.52% of the batch, the sproc 0.48% (comparing the IO, cpu costs etc support this). BUT the text output is:(10639 row(s) affected) First query took: 596 milli-Seconds (10639 row(s) affected) Second query took: 2856 milli-SecondsI appreciate that logical and physical performance are not one and the same but can why is there such a huge discrepancy between the two? They are tested on a dedicated test server, and repeated running and switching the order of the queries elicits the same results. Sample data can be provided if requested but I assumed it would not shed much light. BTW - I know that additional indexes can bring the plans and execution time closer together - my question is more about the concept. If you've made it this far - many thanks.If you can enlighten me - infinite thanks.
View 10 Replies
View Related
Aug 3, 2007
Hello :
How to execute a procedure stored during execution of the report, that is before the poster the data.
Thnak you.
View 4 Replies
View Related
Mar 11, 2008
Hi,
I just want to know how do you called when you are accessing another pc thru \. I forgot how it is called.
Second, I like to know what [MACH] and [INST]. They don't look like directories.
\MultforestHEALTH[MACH][INST]HEALTH_WAREHOUSEDeploy_20080228p_Vitals_FACT.sql'
View 9 Replies
View Related
Nov 29, 2004
Here's my case, I have written a stored procedure which will perform the following:
1. Grab data from a table using cursor,
2. Process data,
3. Write the result into another table
If I execute the stored procedure directly (thru VS.NET, or Query Analyser), it will run, but when I tried to execute it via a scheduled job, it fails.
I used the same record, same parameters, and the same statements to call the stored procedure.
Any idea?
View 3 Replies
View Related
Jan 16, 2004
How can I execute or access a web page from a DTS package?
Both SQL server AND website are hosted on the same server (a Dual 2.4Gz Xeon with 2Gb RAM, RAID 5 etc)
I have 2 tables in SQL server 2000 that hold orders. These need to be posted into another table at a predefined time (ie: 4:30pm) and at the same time, access a remote address (a web service) and post certain elements of the order back.
Basically, can anyone help me out on how to execute a web page from a DTS.
I do NOT want to access a DTS from a webpage, which is all I'm finding at the moment.
View 5 Replies
View Related
Oct 17, 2001
Hello,
Question is, when I try to create relationships in SQL 7 without using the wizard..upon adding the tables I get an errror message that says "Coinitialization has not been called". What does this mean?
View 1 Replies
View Related
Jan 24, 2007
CREATE PROCEDURE sp_getT
@m1 int ,
@txn int ,
@Pan varchar(50) ,
@Act varchar(50) OUTPUT,
@Bal Decimal(19,4) OUTPUT,
@CBal Decimal(19,4) OUTPUT
AS
declare @pBal money, @pCbal money, @pAct money
SET NOCOUNT ON
IF @m1 = 200
BEGIN
IF @txn = 31
BEGIN
exec ChkBal @Pan, @pBal output, @pCbal output, @pAct out
END
END
SET @Act = @pAct
SET @Bal = cast(@pBal as Decimal(19,4))
SET @CBal = cast(@pCBal as Decimal(19,4))
return @Act
return @Bal
return @CBal
the above code returns this error message
"Server: Msg 8144, Level 16, State 2, Procedure CheckBalance, Line 0
Procedure or function ChkBal has too many arguments specified."
How do i specify all the arguments i want in the called procedure?
View 14 Replies
View Related
Jul 31, 2007
Hi everyone -
I'm stumped on what to cal this, there might even be
a method or pattern named for what i am trying to accomplish...
In the database, a number field is included on each table
When the DAL reads the record from the database, it is passed to
the client - work is possibly done to the record and is sent
back to the DAL for update.
A query is done against the table to retrieve the record again,
the numbers are compared - if they don't match, it is assumed the record
been modified by another user/thread/activity. An error is returned to the client stating the data has been changed.
if the numbers match, the record is updated with the number field being incremented by one.
what is this methodology called (beside crap :-) )
thanks
tony
View 7 Replies
View Related
Mar 30, 2006
Hello, perhaps you guys have heard this before in the past, but here iswhat I'm looking for.I have a SQL 2000 table with Social security numbers. We need tocreate a Member ID using the Member's real SSN but since we are notallowed to use the exact SSN, we need to add 1 to each number in theSSN. That way, the new SSN would be the new Member ID.For example:if the real SSN is: 340-53-7098 the MemberID would be 451-64-8109.Sounds simply enough, but I can't seem to get it straight.I need this number to be created using a query, as this query is areport's record source.Again, any help would be appreciated it.
View 9 Replies
View Related
Jan 19, 2007
Hi
I have a drop down list which gets populated from database but I want to add the default value as
--Select----
View 4 Replies
View Related
Apr 22, 2008
This seems like a basic question but I have not been able to find the answer in the help files or by searching this forum.
Is a trigger called for each row updated or is it called once for all rows updated?
for example if I have:
Code Snippet
CREATE TRIGGER mytrigger
ON mytable
AFTER UPDATE
AS
BEGIN
EXEC e-mail-me inserted, N'mytrigger', getdate()
END
and I do this
Code Snippet
UPDATE mytable
SET mycolumn = N'whatever'
WHERE ID > 5 AND ID <= 10
Assuming there is a record for each nteger value of ID, than will mytrigger run 5 times (once for each row updated) or one time (with inserted containing all 5 rows)?
View 3 Replies
View Related
May 6, 2008
Hi,
When a column is evaluated against an UDF in a SELECT ... or WHERE ... It makes sense that the UDF is called for every row of the SELECT. But is it still true if the UDF is called in a subquery as below?
Code Snippet
SELECT LineID, AnyText FROM dbo.UdfTest WHERE LineID IN (SELECT LineID FROM dbo.F_Bogus())
I've made a test and the SQL Profiler Trace shows that the UDF is called only once.
Can anyone confirm if my test is valid and most importantly that the UDF is called only once? FYI, I never use sub queries. This is to clarify a technical detail for our performance investigation.
Thank in advance for any help.
Here is the code to setup the test:
USE NorthWind
GO
CREATE TABLE dbo.UdfTest (
LineID int Identity(1,1) NOT NULL,
AnyText varchar(200) COLLATE database_default NOT NULL
)
GO
INSERT dbo.UdfTest (AnyText) VALUES ('Test1')
INSERT dbo.UdfTest (AnyText) VALUES ('Test2')
INSERT dbo.UdfTest (AnyText) VALUES ('Test3')
GO
CREATE FUNCTION dbo.F_Bogus (
)
RETURNS @tab TABLE (
LineID int NOT NULL,
AnyText varchar(100) COLLATE database_default NOT NULL)
AS
BEGIN
INSERT @tab (LineID, AnyText) VALUES (1, 'UDF1')
INSERT @tab (LineID, AnyText) VALUES (2, 'UDF2')
INSERT @tab (LineID, AnyText) VALUES (3, 'UDF3')
INSERT @tab (LineID, AnyText) VALUES (4, 'UDF4')
INSERT @tab (LineID, AnyText) VALUES (5, 'UDF4')
RETURN
END
GO
Here is the capture of SQL Profiler when executing the statement:
SELECT LineID, AnyText FROM dbo.UdfTest WHERE LineID IN (SELECT LineID FROM dbo.F_Bogus())
SQL:BatchStarting SELECT LineID, AnyText FROM dbo.UdfTest WHERE LineID IN (SELECT LineID FROM dbo.F_Bogus()) 51 2008-05-06 17:58:31.543
SQLtmtStarting SELECT LineID, AnyText FROM dbo.UdfTest WHERE LineID IN (SELECT LineID FROM dbo.F_Bogus()) 51 2008-05-06 17:58:31.543
SPtarting SELECT LineID, AnyText FROM dbo.UdfTest WHERE LineID IN (SELECT LineID FROM dbo.F_Bogus()) 51 2008-05-06 17:58:31.577
SPtmtCompleted -- F_Bogus INSERT @tab (LineID, AnyText) VALUES (1, 'UDF1') 51 2008-05-06 17:58:31.577
SPtmtCompleted -- F_Bogus INSERT @tab (LineID, AnyText) VALUES (2, 'UDF2') 51 2008-05-06 17:58:31.577
SPtmtCompleted -- F_Bogus INSERT @tab (LineID, AnyText) VALUES (3, 'UDF3') 51 2008-05-06 17:58:31.577
SPtmtCompleted -- F_Bogus INSERT @tab (LineID, AnyText) VALUES (4, 'UDF4') 51 2008-05-06 17:58:31.577
SPtmtCompleted -- F_Bogus INSERT @tab (LineID, AnyText) VALUES (5, 'UDF4') 51 2008-05-06 17:58:31.577
SPtmtCompleted -- F_Bogus RETURN 51 2008-05-06 17:58:31.577
SQLtmtCompleted SELECT LineID, AnyText FROM dbo.UdfTest WHERE LineID IN (SELECT LineID FROM dbo.F_Bogus()) 51 2008-05-06 17:58:31.543
SQL:BatchCompleted SELECT LineID, AnyText FROM dbo.UdfTest WHERE LineID IN (SELECT LineID FROM dbo.F_Bogus()) 51 2008-05-06 17:58:31.543
View 5 Replies
View Related
Aug 20, 2007
My package inserts rows into tables with triggers.
The triggers are not being called.
What might be causing this?
View 1 Replies
View Related
Oct 12, 2005
Hello everyone:
I have some nightly jobs that execute stored procedure to call the tables? I want to know which table are called by these stored procedures. Is it possible? Any idea will be appreciated.
Thanks
ZYT
View 5 Replies
View Related
Oct 13, 2007
I am encountering an issue which is effecting our production environment, none of our sql jobs are now saving any kind of job history, nor are the status of the jobs being saved.
I have run a profiler trace and it seems as if procedure : sp_sqlagent_log_jobhistory is not being called during the execution of any of our jobs
Has anyone else encountered anything similar?
View 3 Replies
View Related
May 3, 2006
Hi
In a stored procedure the following code snippet 1 checks against duplicate data being inserted. I've tested it with snippet 2 and it works as expected. However, when the procedure is called from ASP.NET the check seems ineffective. I still get the error msg. The application uses a SqlDataSource with the following parameters.
Any suggestions?
Thanks,
Bakis.
PS I want to ask a question on the ASP.NET forum .The login/pwd for this forum "get me in" to the .net forum in the sense that when I log in I see a logout link. I don't get an "ask a question" button though. Is there a separate screening for each forum?
<UpdateParameters>
<asp:Parameter Name="CatItemUID" Type="Int32" />
<asp:Parameter Name="CatName" Type="String" />
<asp:Parameter Name="Item" Type="String" />
<asp:Parameter Name="Quad" Type="Int16" />
<asp:Parameter Name="UID" Type="Int64" />
</UpdateParameters>
snippet 1 :
if (@CatItemComboExists > 0 )
BEGIN
--print @CatItemComboExists
return 0
END
snippet 2:
begin tran
declare @return_status int
EXECUTE @return_status = spUpdateCatItemRec 343, 'blah','blih', 2,3
print @return_status
rollback
error msg only if proc is called from app
Violation of UNIQUE KEY constraint 'IX_tblCatItemUID'. Cannot insert duplicate key in object 'tblCatItemUID'.
View 3 Replies
View Related
Oct 12, 2006
I am maintaining some C# and ASP.NET code with SQL server 2000. My code calls a stored procedure. The code is a little confusing as to the name of the SQL Server stored procedure that is calling. At this point I don't know how to trace into or debug the stored procedure. Kind of hard to do in the first place when you are not absolutely certain as to the stored proc to be called.I can take an educated guess as to which stored procedure is being called. I figure if I can deliberately make a certain stored procedure fail then this might be able to somehow give me the name of the stored proc that I am calling.So is there a way to do this. Namely make a stored procedure fail, or to return the name of the stored Proc?I would sincerely appreciate some help with this problem.
View 1 Replies
View Related