Is it possible to create a stored procedure that can be used on multiple dBs??
For instance, I want to create a stored procedure and use it on DB1 and DB2.
Right now, I can create a stored procedure in DB1 but only I can run it.
I want to run the stored procedures on DB2 that I created in DB1..
I hope this makes sense..
Any insight into the workings of SPs would be most appreciated...
Disaster Recovery Options based on the following criteria.
--Currently running SQL 2012 standard edition
--We have 18000 databases (same schema across databases)- majority of databases are less than 2gb-- across 64 instances approximately
--Recovery needs to happen within 1 hour (Not sure that this is realistic
-- We are building a new data center and building dr from the ground up.
What I have looked into is:
1. Transactional Replication: Too Much Data Not viable
2. AlwaysOn Availability Groups (Need enterprise) Again too many databases and would have to upgrade all instances
3. Log Shipping is a viable option and the only one I can come up with that would work right now. Might be a management nightmare but with this many databases probably all options with be a nightmare.
More often than not, I typically don't touch DTC on clusters anymore; however on a project where the vendor states that it's required. So a couple things here.
1) Do you really need DTC per instance or one for all?
2) Should DTC be in its own resource group or within the instance's group?
2a) If in it's own resource group, how do you tie an instance to an outside resource group? tmMappingSet right?
the stored procedure don't delete all the records
need help
Code Snippet
DECLARE @empid varchar(500)
set @empid ='55329429,58830803,309128726,55696314'
DELETE FROM [Table_1]
WHERE charindex(','+CONVERT(varchar,[empid])+',',','+@empid+',') > 0
UPDATE [empList]
SET StartDate = CONVERT(DATETIME, '1900-01-01 00:00:00', 102), val_ok = 0
WHERE charindex(','+CONVERT(varchar,[empid])+',',','+@empid+',') > 0
UPDATE [empList]
SET StartDate = CONVERT(DATETIME, '1900-01-01 00:00:00', 102), val_ok = 0
WHERE charindex(','+CONVERT(varchar,[empid])+',',','+@empid+',') > 0
TNX
Hello,I am trying to construct a query across 5 tables but primarily 3tables. Plan, Provider, ProviderLocation are the three primary tablesthe other tables are lookup tables for values the other tables.PlanID is the primary in Plan andPlanProviderProviderLocationLookups---------------------------------------------PlanIDProviderIDProviderIDLookupTypePlanNamePlanIDProviderStatusLookupKeyRegionIDLastName...LookupValue....FirstName...Given a PlanID I want all the Providers with a ProviderStatus = 0I can get the query to work just fine if there are records but what Iwant is if there are no records then I at least want one record withthe Plan information. Here is a sample of the Query:SELECT pln.PlanName, pln.PlanID, l3.LookupValue as Region,p.ProviderID, p.SSNEIN, pl.DisplayLocationOnPCP,pl.NoDisplayDate, pl.ProviderStatus, pl.InvalidDate,l1.LookupValue as ReasonMain, l2.LookupValue as ReasonSub,pl.InvalidDataFROM Plans plnINNER JOIN Lookups l3 ON l3.LookupType = 'REGN'AND pln.RegionID = l3.Lookupkeyleft outer JOIN Provider p ON pln.PlanID = p.PlanIDleft outer JOIN ProviderLocation pl ON p.ProviderID = pl.ProviderIDleft outer JOIN Lookups l1 ON l1.LookupType = 'PLRM'AND pl.ReasonMain = l1.LookupKeyleft outer JOIN Lookups l2 ON l2.LookupType = 'PLX1'AND pl.ReasonSub = l2.LookupkeyWHERE pln.PlanID = '123456789' AND pl.ProviderStatus = 0ORDER BY p.PlanID, p.ProviderID, pl.SiteLocationNumI know the problew the ProviderStatus on the Where clause is keepingany records from being returned but I'm not good enough at this toanother select.Can anybody give me some suggestions?ThanksDavid
View 5 Replies View RelatedI am new to Reporting Services and hope that what I am looking to do is within capabilities :-)
I have many identical schema databases residing on a number of data servers. These support individual clients accessing them via a web interface. What I need to be able to do is run reports across all of the databases. So the layout is:
Dataserver A
Database A1
Database A2
Database A3
Dataserver B
Database B1
Database B2
Dataserver C
Database C1
Database C2
Database C3
I would like to run a report that pulls table data from A1, A2, A3, B1, B2, C1, C2, C3
Now the actual number of servers is 7 and the number of databases is close to 1000. All servers are running SQL2005.
Is this something that Reporting Services is able to handle or do I need to look at some other solution?
Thanks,
Michael
Greetings,We are trying to set up a set of "Leading Practices" for ourdevelopers, as well as ourselves, and hope some gentle reader canrecommend some documentation in favor of what appears to be the rightposition to take.We do not allow third party applications to run on our SQL Servers. Wewant to include DTS Packages under the definition of third partyapplications, insisting instead that the developers save theirpackages as COM Formatted files into their source code control systemsand run them from their app servers. The devlopers would like to hearthis from someone besides ourselves.While strong recomendations to remove guest access to MSDB altogetherabound, I have been unable to find a straight forward discussion ofthe advantages of structured file storage and app server off load ofDTS packages.Can anyone suggest any articles, white papers, rants, etc attemptingto formulate a solution to the benefits of taking msdb away fromguest, with the advantages of running DTS from an App server orworkstation platform, with the packages protected in source codecontrol?Thank youJohn Pollinsjpollins @ eqt . com
View 2 Replies View Related-- declare table declare @Table1 table(ID int, Value int )-- Insert sample data provided into tableinsert into @Table1select 1 , 2 union allselect 2 , 1 union allselect 7 , 2 -- declare table declare @Table2 table(ID int, Value int )-- Insert sample data provided into tableinsert into @Table2select 1 , 2 union allselect 5 , 1 union allselect 3 , 2 -- declare table declare @Table3 table(ID int, Value int )-- Insert sample data provided into tableinsert into @Table3select 1 , 2 union allselect 2 , 1 union allselect 3 , 2 -- declare table declare @Table4 table(ID int, Value int )-- Insert sample data provided into tableinsert into @Table4select 5 , 2 union allselect 2 , 1 union allselect 10 , 2 /*Is there anyway I can write one sql query which will give me the following result:IDs = All unique ID from all tablesSumOfAllValueFromAllTables =for the same ID, value from Table1+for the same ID, value from Table2 + so on ...IDs - SumOfAllValueFromAllTables===============================1 - 62 - 33 - 45 - 37 - 210 - 2*/--I have tried by the following way, but for more tables, it is becoming complicated, because I have 12 tables.--Is there any better way to do it? Thanks for the help.select coalesce(t1.ID,t2.ID) as IDs, coalesce(sum(t1.value),0) +coalesce(sum(t2.value),0) as SumOfAllValueFromAllTablesfrom @Table1 t1full join @Table2 t2 on t1.id=t2.idgroup by t1.ID,t2.IDorder by IDs
View 1 Replies View RelatedI have a search form that takes 5 inputs from textboxes or Drop Down Lists.
I built a query that works just fine in Analyizer, but the second i try to turn it into a sproc that takes parameters I can only get it to work with one parameter so far....
Here is the query that works just fine
Select ftr_location.loc_name, ftr_file.loc_id, ftr_file.file_date, ftr_file.file_type_id, ftr_file.acct_no,
ftr_file.cust_fname, ftr_file.cust_lname, ftr_status.status_name, ftr_file.destruction_date
FROM dbo.ftr_file
Inner Join ftr_location On ftr_location.loc_id = ftr_file.loc_id
Inner Join ftr_Status On ftr_status.status_id = ftr_file.status_id
Inner Join ftr_doc_types on ftr_doc_types.file_type_id = ftr_file.file_type_id
WHERE ftr_file.Loc_id = 18 and ftr_file.file_date= '12/4/2004'
GO
The sproc version that I cant get to work is:
CREATE PROCEDURE dbo.usp_ftr_searchfile_s
(
@ResultLocation int = null,
@ResultFileDate datetime = null
)
AS
DECLARE @SQLString VARCHAR(4000)
SET @SQLString = 'Select ftr_location.loc_name, ftr_file.loc_id, ftr_file.file_date, ftr_file.file_type_id, ftr_file.acct_no,'+
'ftr_file.cust_fname, ftr_file.cust_lname, ftr_status.status_name, ftr_file.destruction_date' +
' FROM dbo.ftr_file' +
' Inner Join ftr_location On ftr_location.loc_id = ftr_file.loc_id' +
' Inner Join ftr_Status On ftr_status.status_id = ftr_file.status_id' +
' Inner Join ftr_doc_types on ftr_doc_types.file_type_id = ftr_file.file_type_id' +
' WHERE 1=1 '
If @ResultLocation Is Not Null
Set @SQLString = @SQLString + 'And ftr_file.loc_id=' + cast @ResultLocation
If @ResultLocation Is Not Null
Set @SQLString = @SQLString + 'And ftr_file.file_date=' + cast @ResultFileDate
EXEC (@SQLString)
GO
Any feedback would be most helpful, as I can get it to work with one parameter but not when I add teh second in the mix.
I have a dataadapter on my asp.net page and am having issues passing values to the sql statement. See below:
SELECT tblTemp.SensorID, tblSensor.SensorNum, tblTemp.TempTime, tblTemp.TempVal FROM tblTemp
INNER JOIN tblSensor ON tblTemp.SensorID = tblSensor.SensorID
WHERE (tblTemp.TempTime BETWEEN @From AND @To)
AND (tblTemp.SensorID IN (@Sensor))
ORDER BY tblTemp.TempTime
@Sensor is populated in vb with the selected values from a checkboxlist control. I attempted to test this in the "Data Adapter Preview" window, but continually get an error. Is there a way to pass multiple values to a parameter?
Any help would be appreciated, thanks!
Hi All,
I am trying to update a huge table with about 70 million records and the table do not have a primary key.
I want to update a "FLAG" field in the table with value 'N' default value of flag fields for all records is NULL.
I want to update the whole table in chunks say 50,000 records a time...
like
update tablename (first 50000)
set flag = 'N' where flag = NULL.
Hope I am clear..:-)
thanks
hardlyworking..
I have an app that is critical to our business. It handles and syncronises several SQL Servers, checks integrety etc. I need to make the app so it can run a few things at once. Does anyone have any experience with this? Currently we use Delphi and ADO. I have been fiddling with DMO to get more performance - I am not sure ADO is very quick for some I tasks I need to do.
I suppose my main question *really* is does ADO/DMO multi-thread and has anyone tried it. If not how do people do it?
Im trying to filter the word starts with SAG,WAG,DGA from the table:version of column versiondescription
tablename:version
versionid versiondescription
********** *******************
1 sag buildagreement
2 wag buildagreement
3 dga buildagreement
My existing query:
Declare @GuildFilter varchar(1000)
declare @Guild varchar(1000)
set @Guild='DGA,WGA'
set @GuildFilter= '['+ replace(@Guild,',','-') +']%'
[code]...
when i try to pass only DGA and WGA,query also picks SGA .
I and trying to get some help with Multi-Value parameters in Reporting Services 2005 in VS 2005.
I’m new to the product and struggling with the TSQL syntax.
(I have simplified my SQL statement for the purposes of this question)
I have a dataset below which has 1 parameter;
="SELECT * " &
" FROM dbo.Table" &
Iif(Parameters!Sex.Value = "ALL",""," AND dbo.Table.Sex = '" & Parameters!Sex.Value &"'" )
The Sex parameter dataset contains F, M, U and ALL – the above parameter allows me to select on any of the 4 options.
I would like to use the multi-value parameter but am struggling to grasp the syntax. Believe me I have tried a few things.
Could someone provide me with an idiots guide on how to make my basic parameter a multi-value parameter?
Any help would be great.
I have a SQL2k5 table capturing transaction via an online vendor application. I need to join this data with cooresponding data that exist within a 2003 MS Access .MDB application. I've had recent training in SQL Serv 2005 T-SQL and programming. This is what I'm planning but not if this is the best/simple plan.
write After Insert trigger for SQL tbl to invoke a sp
write After Insert trigger for SQL tbl to invoke a sp (OK with this) write a sp to select last inserted record from SQL tbl (OK with this)
sp will use pk_col to pull data from linked MS Access 2003 using OPENQUERY or four part naming (is one way better than the other?)
insert Parent record into MS Access parent tbl (after insert, how can i get Parent Key from this insert to use as Child FK col? will @@identity work?)
insert Child record into MS Access child tbl (how can i get Child Key from this insert to use as GrandChild FK col? @@identity?)
insert GrandChild record into MS Access GrandChild table
any help greatly appreciated!
Thanks for being there....
Tom
Now do you know how to take multi-value parameter array values and pass to Sql Stored Proc for summing ?
View 3 Replies View RelatedGreetings - I see a few postings regarding problems regarding multi-value parameters, and see no solution responses.
Am attempting to filter on data using a multiple values drop-down parameter. Dataset has been created and runs correctly. The Multi-value parameter setting has been checked. When report is run and 1 value selected from drop-down, report runs fine. If multiples (or all) are selected, then receive "Query execution failed for dataset "mydataset" incorrect syntax near ','" error.
Can someone please advise a solution to this? Tks & B/R
Hi,
In my report i have a multi valued parameter, when i view my report in the Web application with Report Viewer, The multi valued parameter is displaying in light color.Can we able to change this.
Thanks in advance
Hi every body!
I have two reports ,in first i have one multi value parameter .in first report i select more than one value ,then in second report i want to have these values becuse i have another multi value parameter ,when i join these reports via navigation
in parameters (in first report) i put the values of multi value parameter in fisrt report for value of multi value parameter in second report,but in this case fore example i have it:
in first reprt-> navigation->parameters->
ParameterName ParameterVaue
EmployeeID =Parameters!EmployeeID.Value(0)
but in second report i need all of my selections in first report not just first value
Can anybody help me?
I have a stored procedure im passing into Reporting Services. Only problem is , What do i need to change to allow the user to select more then one value. I already know what to do on the reporting services side, but it keeps erroring with the data source IE my stored procedure. Here's the code:
Code Snippet
SE [RC_STAT]
GO
/****** Object: StoredProcedure [dbo].[PROC_RPT_EXPENSE_DETAIL_DRILLDOWN_COPY] Script Date: 09/05/2007 13:49:09 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[PROC_RPT_EXPENSE_DETAIL_DRILLDOWN_COPY]
(@Region int = Null)
AS
BEGIN
SELECT Budget_Reporting_Detail.Budget_Report_Detail_Datetime, Budget_Reporting_Detail.Budget_Report_Detail_Document_Type,
Budget_Reporting_Detail.Budget_Report_Detail_Code, Budget_Reporting_Detail.Budget_Report_Detail_Description,
ISNULL(Budget_Reporting_Detail.Budget_Report_Detail_Amount, 0) AS Actual, Budget_Reporting_Detail.Budget_Report_Detail_Qty,
Budget_Reporting_Detail.Budget_Report_Detail_Responsible, Territory.Name+'('+Code+')' as [Name], Region.Region, Round((Forecast.Budget_Amount/13),2) AS Budget,
Forecast.Budget_Type_Code, Forecast.Budget_Year, Budget_Forecast_Period,
Forecast.SalesPerson_Purchaser_Code
FROM RC_DWDB_INSTANCE_1.dbo.Tbl_Budget_Reporting_Detail AS Budget_Reporting_Detail RIGHT OUTER JOIN
RC_DWDB_INSTANCE_1.dbo.Region AS Region RIGHT OUTER JOIN
(SELECT Budget_Type_Code, Budget_Year, SalesPerson_Purchaser_Code, Budget_Amount
FROM RC_DWDB_INSTANCE_1.dbo.Tbl_Budget
) AS Forecast INNER JOIN
RC_DWDB_INSTANCE_1.dbo.Territory AS Territory INNER JOIN
RC_DWDB_INSTANCE_1.dbo.Tbl_Territory_In_Sales_Responsible AS Territory_In_Sales_Responsible ON
Territory.Code = Territory_In_Sales_Responsible.Territory_Code INNER JOIN
RC_DWDB_INSTANCE_1.dbo.Tbl_Territory_In_Region AS Territory_In_Region ON Territory_In_Region.Territory_Code = Territory.Code ON
Forecast.SalesPerson_Purchaser_Code = Territory_In_Sales_Responsible.SalesPerson_Purchaser_Code ON
Region.Region_Key = Territory_In_Region.Region_Key ON Budget_Reporting_Detail.Budget_Type_Code = Forecast.Budget_Type_Code AND
Budget_Reporting_Detail.Budget_Year = Forecast.Budget_Year AND
Budget_Reporting_Detail.SalesPerson_Purchaser_Code = Forecast.SalesPerson_Purchaser_Code
WHERE (Region.Region_Key IN( @Region)) AND (Forecast.Budget_Year = 2007)
END
what am i doing wrong?
Hi there,
I need help about storing data in chinese, arabic, english..... languages in one database. For that I create Database with Latin1_General_CI_AS and I have table Testing with two columns wich are LangName= nvarchar(50), and Comment = nvarchar(MAX). I tried to store comment in chinese language but I could not, when I entered the data "個編碼å?¯ä»¥åŒ…å?«è¶³å¤ çš„å—元：例如，單單æ?å·žå…±å?Œé«”就需è¦?好幾種ä¸?å?Œçš„編碼來包括所有的語言。å?³ä½¿æ˜¯å–®ä¸€ç¨®èªžè¨€ï¼Œä¾‹å¦‚英語，也沒有" it converted as ? sometimes or look as a square.
thanks
I know that there have been a number of Posts with reference to Multi-Value Parameters, but none have helped me resolve my issue.
I am relatively new to SSRS, and use it in it's simplist form. i.e. I do not use xml code or SQL Statements, I just use the Menus.
I have created a Multi-Value Parameter (Report > Report Parameters) and have assigned a number of Non Queried Labels and Values. I have also assigned this to the Filter Tab via Table Properties.
When previewing, if I select each parameter individually and view the Report everything is fine. If I select one or more, the report only returns values for the first parameter listed.
Have I missed a step, is there a bug or do I just need to be trainied to use SQL Statements? (Hopefully not the latter!!)
Help would be very much appreciated.
Shodman
Hi:
I am building a report and have a few parameters. One of this parameters is set up as Multi-Value. When I only select one value everything is running fine. But when I select multi values I get an error saying I must declare my variable.
Any idea why this is happening?
Ben
Can multiple users connect to SQL Server 2005 concurrently?
View 4 Replies View RelatedUsing Management Studio (April CTP), I tried to connect to integration services. There was no server listed, so I added my computer jaargeroxpctp and this went fine.
View 3 Replies View Related
I'm using a sql server Stored Procedure, that uses a defined parameter to pull the records. How can i make this stored procedure a multi value parameter. I select multi value in report parameters, and changed the where clause to "IN" but its still not working, when i select more then one parameter from the drop down list. Here is my stored procedure.
Code Snippet
USE [RC_STAT]
GO
/****** Object: StoredProcedure [dbo].[PROC_RPT_EXPENSE_DETAIL_DRILLDOWN_COPY] Script Date: 09/05/2007 13:49:09 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[PROC_RPT_EXPENSE_DETAIL_DRILLDOWN_COPY]
(@Region int = Null)
AS
BEGIN
SELECT Budget_Reporting_Detail.Budget_Report_Detail_Datetime, Budget_Reporting_Detail.Budget_Report_Detail_Document_Type,
Budget_Reporting_Detail.Budget_Report_Detail_Code, Budget_Reporting_Detail.Budget_Report_Detail_Description,
ISNULL(Budget_Reporting_Detail.Budget_Report_Detail_Amount, 0) AS Actual, Budget_Reporting_Detail.Budget_Report_Detail_Qty,
Budget_Reporting_Detail.Budget_Report_Detail_Responsible, Territory.Name+'('+Code+')' as [Name], Region.Region, Round((Forecast.Budget_Amount/13),2) AS Budget,
Forecast.Budget_Type_Code, Forecast.Budget_Year, Budget_Forecast_Period,
Forecast.SalesPerson_Purchaser_Code
FROM RC_DWDB_INSTANCE_1.dbo.Tbl_Budget_Reporting_Detail AS Budget_Reporting_Detail RIGHT OUTER JOIN
RC_DWDB_INSTANCE_1.dbo.Region AS Region RIGHT OUTER JOIN
(SELECT Budget_Type_Code, Budget_Year, SalesPerson_Purchaser_Code, Budget_Amount
FROM RC_DWDB_INSTANCE_1.dbo.Tbl_Budget
) AS Forecast INNER JOIN
RC_DWDB_INSTANCE_1.dbo.Territory AS Territory INNER JOIN
RC_DWDB_INSTANCE_1.dbo.Tbl_Territory_In_Sales_Responsible AS Territory_In_Sales_Responsible ON
Territory.Code = Territory_In_Sales_Responsible.Territory_Code INNER JOIN
RC_DWDB_INSTANCE_1.dbo.Tbl_Territory_In_Region AS Territory_In_Region ON Territory_In_Region.Territory_Code = Territory.Code ON
Forecast.SalesPerson_Purchaser_Code = Territory_In_Sales_Responsible.SalesPerson_Purchaser_Code ON
Region.Region_Key = Territory_In_Region.Region_Key ON Budget_Reporting_Detail.Budget_Type_Code = Forecast.Budget_Type_Code AND
Budget_Reporting_Detail.Budget_Year = Forecast.Budget_Year AND
Budget_Reporting_Detail.SalesPerson_Purchaser_Code = Forecast.SalesPerson_Purchaser_Code
WHERE (Region.Region_Key IN( @Region)) AND (Forecast.Budget_Year = 2007)
END
Just a question about multi casting.
If I create a copy of a data set using a multi cast, do operations on one of the output sets effect the other output set?
For example, in one ouput set I'm setting a column to NULL - this is actually updating the other set as well. Is this meant to happen?
Thanks!!
hi,
i read from this forum that to pass array to report is using multi value parameter . my problem now is
1. can i pass multi dimension array.
2. how do i show the multi value parameter in a table . for example i have a multi value parameter that may contain 10 or 20 array . how do i dynamic it show in table.
rgds,
charles
hi,consider this:i have american users in a db called "user" in a server called AMERICAand rest of the world users in a db called "user" in a server called OTHERhow can i do a join betwhen American's users and Rest of the word's User db?
View 3 Replies View RelatedI'm trying to build a sproc that will return rows even if some of the parameters are blank. For example; if a user does not enter a priority, a status, or a caller the sproce should still return rows based on the other parameters.
Can anyone help me find a way to modify my sproc bellow to allow this? I think the way I have it bellow will only return those rows where the user has entered a parameter or the record has a null in the field.ALTER PROCEDURE dbo.ContactManagementAction
(
@ClientID int,
@Priority int,
@TStart datetime,
@TEnd datetime,
@Status nvarchar,
@ConTypeID int,
@Caller nvarchar,
@Keyword nvarchar
)
AS
SELECT Task_ID, ClientID, Priority, ActionDate, Subject, Note, Status, CompletionDate, TaskDocument, ReminderDate, Reminder, ReminderTime, Sol_ID,
DateEntered, EnteredBy, Caller, ContactTypeID, DueDate
FROM tblTasks
WHERE (ClientID = @ClientID) AND (Priority = @Priority) OR (Priority IS NULL) AND (ActionDate BETWEEN @TStart AND @TEnd) AND (Status = @Status) OR (Status IS NULL) AND
(ContactTypeID = @ConTypeID) OR (ContactTypeID IS NULL) AND (Caller = @Caller) OR (Caller IS NULL) AND (Subject LIKE @Keyword) OR (Subject IS NULL)
RETURN
Hi,I have a table in an MS SQL 2000 database that represents fields on a form.CREATE TABLE [dbo].[TagData]( [FieldName] [nvarchar](255), [UserID] [int] NOT NULL, [Data] [nvarchar](255)) A requirement has come up where some of these fields must contain Hebrew, or any other unicode character, data and some of the fields will be English. How can I go about saving and retrieving this information.The current solution is a legacy Classic ASP application and I suspect I am going to have to redo this in ASP.NetThanks,Leon
View 2 Replies View RelatedHI,
I am using Multi languages web application with sql database...I am using Arabaic and English languge is there is any thing to change sql database data in Arabic and English on run time.I am using only one database client add some record in Arabic in sql database but the another side some one wana check those records in English...plz let me know how can i do on run time asp.net
Thanks with best regards,
I'm developing an application that needs to handle several companies data one at a time.
I have a database called ROOT with the common tables like companies, users, etc. and all the stored procedures that I need.
Then I have a unique database per company containing all their info.
How can I apply the stored procedures that I have on database ROOT to the tables on each company's databases ?
The TSQL USE command do not accept variables.
Thanks for your help,
MOshe