In my SQLSERVER2005 EXPRESS
I Detached all databases and attached with new set of databases from SQL2005 Developer edition from different server.
Now My important SP response time increased from 00:00:00(before detaching old set of databases) to 00:00:08
How to improve query response time for SQLSERVER2005 EXPRESS
earlier it worked fine
Thanks
Regarding SSRS, what is considered a good response time? We have some reports running 2 minutes and the users think that is too long. Is there a guideline as to what a user should reasonably expect and if so, what is that guideline?
View 2 Replies View RelatedWhy is the response time to run a query faster when the output is displayed in grid format as compared to text format?
View 1 Replies View RelatedHi
I have Problem, My response time is too Low. Is Any one Know how to improve my response time. My DATABASE SIZE IS 11 GB. I didn’t change any configuration parameter after installing SQL Server. Right my server Having default configuration parameters. Whether I have to change any parameters or not. My queries will generate lot of temporary tables.
Thanks
JK
When I try to connect to a SQL server instance from Enterprise Manager, I'm getting a timout connection error. I have to change the timoeout parameter from 4 (the default) to 30 in order to work.
Also I realize that some applications (like sharepoint) are having the same problem connecting to that server.
My question is:
Why is that happening?
It used to work fine, and I'm getting this issue a couple of days ago.
Appreciate your help.
Hello,
I am currently migrating a DB from Oracle to SQL Server (Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86))
I've used ssma to do the migration, and I'm reviewing the prodedures to check them. I have find a performance problem in one of them, which worked perfectly under Oracle, and I have tried lots of things with no luck, so I guess I need some help
I insert a row in a table, and the time it takes for this is fine, but seconds later I need to read the row, and this Select lasts 1-2 ms more every time. This process is repeated lots of times.
Every insert-select takes 200 ms when it receives the first data (including some other operations that are not increasing the response time), and 200 insertions later it takes about 500 ms, which is really too much, considering it keeps increasing.
The table has 25+ columns, and some of them contain varchar of 3000+ characters.
I make the select using 4 columns in the where part. One of them is a numeric, and the rest are varchar (no one is the primary key).
I've got a clustered index for the primary key, and two more non-clustered indexes. One of them refers to the columns I use in the Select, and the parameters are Fill Factor: 90, and Recompute Statistics Automatically.
I hope I explained properly...
Any ideas?
We did an in place convertion of our data base from MS SQL Server 6.5 to 7.0.
Our application is much slower now on SQL 7.0. Any idea why?
The following is a sample SQL statement that runs quickly on SQL 6.5 and takes a long time on SQL 7.0 I also attached the query plans from SQL 6.5 and 7.0.
SELECT Person_Name.PerNam_Person_Name_PK ,
Person_Name.PerNam_Row_Status ,
Person_Name.PerNam_Last_Name_Sndx ,
Person_Name.PerNam_Last_Name ,
Person_Name.PerNam_Name_Suffix ,
Person_Name.PerNam_First_Name ,
Person_Name.PerNam_Name_Prefix ,
Person_Name.PerNam_Middle_Name ,
Person_Name.PerNam_Event_Person_FK ,
Event.Evn_Event_Nbr ,
Event.Evn_Event_Type ,
Event_Person.EvnPer_Last_Name ,
Event_Person.EvnPer_First_Name ,
Event_Person.EvnPer_Middle_Name ,
Event_Person.EvnPer_Name_Prefix ,
Event_Person.EvnPer_Name_Suffix
FROM Person_Name , Event , Event_Person
WHERE (Person_Name.PerNam_Agency_ID = "CL")
AND ( Person_Name.PerNam_Event_Person_FK = Event_Person.EvnPer_Event_Person_PK )
and ( Event_Person.EvnPer_Event_FK = Event.Evn_Event_PK )
and (Person_Name.PerNam_Person_Name_PK = 0 or ( Person_Name.PerNam_Event_Person_FK = 581541) )
and ( Person_Name.PerNam_Row_Status <> "D" )
Query plan in SQL 6.5
SQL Server Execution Times:
cpu time = 0 ms. elapsed time = 31250 ms.
STEP 1
The type of query is INSERT
The update mode is direct
Worktable created for REFORMATTING
FROM TABLE
Person_Name
Nested iteration
Index : PK_Person_Name
FROM TABLE
Person_Name
Nested iteration
Index : PerNam_Event_Person_FK
FROM TABLE
Person_Name
Nested iteration
Using Dynamic Index
FROM TABLE
Event_Person
Nested iteration
Index : PK_Event_Person
TO TABLE
Worktable 1
STEP 2
The type of query is SELECT
FROM TABLE
Worktable 1
Nested iteration
Table Scan
FROM TABLE
Event
Nested iteration
Index : PK_Event
SQL Server Parse and Compile Time:
cpu time = 0 ms.
Table: Person_Name scan count 2, logical reads: 6, physical reads: 5, read ahead reads: 0
Table: Event scan count 0, logical reads: 0, physical reads: 0, read ahead reads: 0
Table: Event_Person scan count 0, logical reads: 0, physical reads: 0, read ahead reads: 0
Table: Worktable scan count 0, logical reads: 0, physical reads: 0, read ahead reads: 0
Table: Worktable scan count 1, logical reads: 1, physical reads: 0, read ahead reads: 0
SQL Server Execution Times:
cpu time = 0 ms. elapsed time = 62 ms.
Query plan on SQL 7.0
SQL Server parse and compile time:
CPU time = 431 ms, elapsed time = 535 ms.
.................
Table 'Event'. Scan count 1, logical reads 3, physical reads 3, read-ahead reads 0.
Table 'Event_Person'. Scan count 1, logical reads 6, physical reads 5, read-ahead reads 0.
Table 'Person_Name'. Scan count 1, logical reads 4588, physical reads 2, read-ahead reads 4092.
SQL Server Execution Times:
CPU time = 7921 ms, elapsed time = 13519 ms.
SQL Server Execution Times:
CPU time = 0 ms, elapsed time = 13781 ms.
Hi
i had a problem with the SSIS response time - its very slow.
When I try to open the solution and than click to open the Pakage it's take at least 6-10 minutes until it's open.
Please advice what can be the reason
10x
Is there a global variable or something of the sort that would tell me how long it took to execute a query??
I need to monitor my DB response times and we have a query that runs in under 2 seconds. So we want to run this query every couple of minutes and if it takes more than 12 sec to run, we want to send an email to our DB staff...
I know that I could take a time stamp before and after then subtract but I wanted to know if there was an easier way to do it..
Thanks.
We have poor performance spikes on a drive containing our log file but this is only for reads and seems to be at a time when we run a re-index job. If this is a likely correlation as to poor performance in reading the log file, and what reads are done from a log file.
View 2 Replies View RelatedUsing SSMS 2012, we are experiencing extremely slow response times when opening SQL job steps to edit and also deploying SSIS Pkg's. Sysadmins have no problem. Users in the ssis_admin role have no problem. It's the rest of the users who have issues.
View 1 Replies View RelatedHi,
I have a problem with querying systemjobhistory data. Response time is slow and it is vary from time to time, sometime it takes few seconds and sometime it takes more than 2 minutes. I understand that there is quite a number of jobs in DB server and which might result in slow response time.
Is it possible to shorten the response time? like using index? My application is always look like hang when the query take very long time to run.
Any help is greatly appreciated. Thank you.
Regards,
maxChin
Every so
often I am seeing this error in the Event Viewer on Windows 2003
Server. It related to a file that pulls documents from a SQL server db using Response.BinaryWrite. When it pulls a file of about 2MB it creates a warning in the EventViewer. I was told to look at using Response.WriteFile to pull the file instead. I found this page: http://support.microsoft.com/kb/306654 which talks about it but doesnt give an explination on how to integrate with grabbing the content. Does anyone know how to pull db content and use WriteFile and put the file into the Response. Similar to this: Response.Buffer = TrueResponse.Clear()Response.ContentType = contentTypeResponse.AddHeader("content-disposition", "attachment; filename=" + fileName)Response.BinaryWrite(content)Response.Flush()Response.End()
Hi,
Here is the code:Try
If DS.Tables(0).Rows.Count = 0 ThenResponse.Write("Cannot delete an unexist row!")
Response.End()
End If
DS.Tables(0).Rows(0).Delete()
Catch BUG as Exception
Response.Write(Bug.Message)
End Try
I removed all the connection stuff..
What I don't understand is why if ds.table(0).rows.count is zero I still get Bug.Message? I did Response.End ...
Thank you.
Hi. We are migrating a mainframe datacom database to SQL Server. One of our client-server applications already uses SQL Server. This application uses a middleware product to query and update the datacom database being migrated. We are considering using Service Broker to replace the middleware.
In many cases the client does not need a response provided the message is queued and will eventually get delivered. However, in some cases the client would like to wait for the message to be processed before proceeding. Is there an easy way to both submit and optionally wait for a response - with data - in a single stored procedure? If client does not want to continue to wait, is there a way to use a procedure to check for the returned message later?
We have not used Service Broker before and are doing for a "sanity" check before proceeding. We do not want to tightly couple the two databases at this time.
At my location we are running Great Plains on SQL server with the Great Plains client on the front end communicating over IP Sockets. Occasionally the client will stop responding for up to 15 minutes. This occurs to all clients at the same time. While this is happening I have ran performance monitor on the SQL server using the SQL counters and everything looks fine. Performance on the server and the network does not degrade. Only the Great Plains client is affected. From this I feel this is not a network problem. I would like some suggestions on what could possible cause this type of problem. I am really just looking for a starting point on where the problem may be originating from. Any suggestions will be greatly appreciated.
thanks.
Here is the configuration we have at our site:
64 bit virtual server - Clustered 64-bit SQL Server 2005 Standard SP2 listening on port 1433.
32 bit virtual server - 32-bit application that connects to above SQL Server 2005 via standard OLEDB driver installed with windows (String utilized: Provider=SQLOLEDB.1;Persist Security Info=False;Initial Catalog=applicationdb;Data Source=ServerInstanceName).
We are experiencing a slow reponse of 45 sec to more than a minute on a simple select statement on a table having 5000 rows.
The same select statement on the Server locally in Studio returns results back in 2 seconds or less. But from Stuido on any other desktop (remote) it takes 45 secs or more. Same slow response is seen by the application which is using OLEDB.
I've looked into some of the Server parameters but didn't find any clues.
Any help is greatly appreciated.
I have a SQL Server 2000 runing for production. Recently it is frozened occasionally.
Ath the time, no response from SQL server even I use Enterprise Manager, I can not connect to the server.
So there is no way to fixed only reboot the server.
Aftrer that, I checked the error log and go the info as:
SQL Server terminating because of system shutdown.
LogEvent: Failed to report the current event. Operating system error = 31(A device attached to the system is not functioning.).
After reboot, I checked the error log again, seems no special error except:
Attempting to initialize Distributed Transaction Coordinator.
Failed to obtain TransactionDispenserInterface: Result Code = 0x8004d01b
What's the possible reason for this issue? how to figure out and slove this problem?
Hello everyone,
I have three merge publications that use web synchronization. The first publication works with no problem. When I try and sync the second publication, I get the following error messages:
"The operation timed out"
"The Processing of the response message failed".
So, I upped the query timeout from 300 seconds to 900 seconds. Now I get the following error messages:
"The connection with the server was terminated abnormally"
"The Processing of the response message failed".
I am using the Synchronize applet (found in the Accessories menu) to test my publications.
The third publication also works with no problem, so I do not see why the second one fails.
The only difference between the three is the following:
The first replicates a small handful of UDF's
The second replicates all tables (and has some filtering applied)
The third replicates all stored procs, views, and remaining UDF's.
Any ideas?
Thanks...
hi,
I ran into a situation that if I don't use sql server for a while, in MS SQL Server Management Studio, when I run some query again, it takes a long time to respond. I looked into it with Activity Monitor, seems like the query was waiting for something, in the process view tab, it shows that:
WaitType: LATCH_EX
Resource: LOG_MANAGER(112F88C8)
What is the latch-ex? What should I check next to find out the problem?
Thanks.
Hi all,
I have created a report in SSRS 2005 which is being viewed by users from different Time Zones.
I have a dataset which has a field of type datetime (UTC). Now I would like to display this Date according to the User Time Zone.
For example if the date is August 07, 2007 10:00 AM UTC,
then I would like to display it as August 07, 2007 03:30 PM IST if the user Time Zone is IST.
Similarly for other Time Zones it should display the time accordingly.
Is this possible in SSRS 2005?
Any pointers will be usefull...
Thanks in advance
sudheer racha.
Hi there, I tried to make it different as usual but i´m stacked into this problem:Supose TABLE DetailsID_DET ID_CAR DETAILS1 3 1,2,3,4,5,62 4 2,43 5 5,6,7,8andTABLE Details_ItemsID_DI DETAIL_NAME1 Stereo HiFi CD2 Alarm3 AirConditioning4 LeatherSeats5 Pro Wires6 Aluminium WheelsThe problem appears when i need to bring CAR DETAILS (NAME) from TABLE DETAIL_ITEMS.Mi guess i that I should make something like:SELECT * FROM DETAILS_NAME WHERE id_di = (( Array(i) FROM Details )) one by one...I really dont know how to face it.First I thought in bringing ALL details_Items (datafieldtext = id_di and datavaluetext=Details_names) into a dataview.And then "somohow?" filter this dataview according with the Array previuosly splited by me with a For each function.Then I thought "Perhaps" there is a simpliest way to do that using SQL views, o advanced SQL QUERYS.and Finally I thought that creating a VIEW in for both TABLES would be great.The point is that, neither 1,2,3 options, honestly , I dont know how to face them.Thanks in advance, apologise my "rude" English grammar.LUCAS ( From Argentina )
I have 2 pages. ( i want to pass information from a text box to the "certificate.aspx" database query)
page 1 certsearch.aspx
this is my script i have a label, commnad button, & textbox
If txtSearchCert.Text = "" Then
lblMsg.Text = "Please enter a certificate #"
Else
Response.Redirect("certificate.aspx" & txtSearchCert.Text)
End If
page 2 certificate.aspx
i am not sure what goes here.this is what i am trying
Request.QueryString = (txtSearchCert.text)
This is my database query on certificate.aspx page
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:imacsConn %>"
SelectCommand="SELECT * FROM [SummaryBlue] WHERE REPORTNUMBER = ?"></asp:SqlDataSource>
Hi,
I am trying to retrive some XML from my SQL server 2005 database. The XML is in a table called "myxml" and it is being stored a native XML. The Field type is "XML". The VB code returns nothing when I select SELECT xml. How ever if i SELECT NAME it displays the correct name from the name field. how do I return the XML to be viewed as XML throught the response.write?
Thanks!
Here is my Table definition:
Column Name
Data Type
Allow Nulls
Id
Int
xml
xml
Yes
NAME
Nvarchar(50)
yes
My XML that is stored in the XML field:
<ROOT>
<CHAPTER>
<TITLE>This is a test</TITLE>
</CHAPTER>
</ROOT>
Here is my VB code:
Dim myconnection As SqlConnection
Dim mycommand As SqlCommand
myconnection = New SqlConnection()
myconnection.ConnectionString = _
ConfigurationManager.ConnectionStrings("myxmlConnectionString2").ConnectionString
Dim strSQL As String = "SELECT [xml] FROM myxml WHERE id = 76"
' create SQL command instance
mycommand = New SqlCommand(strSQL, myconnection)
Try
' open database connection
myconnection.Open()
'execute T-SQL command
Dim dr = mycommand.ExecuteReader()
While dr.read()
Response.Write("<p>" & dr(0).ToString() & "</p>")
End While
Response.Write("GOT IT")
Catch ex As Exception
Response.Write(ex.Message)
Response.Write(strSQL)
Response.End()
End Try
' Close connection
myconnection.Close()
Hi all,
I have a website www.searchcontracts.com which has a search feature on the front page. The problem is that whenever a search is submitted (without and filters) it processes extremely slow (if at all, sometime throws 'general network' errors). If working properly it will return about 500+ records. As far as i know if there should be no issues returning a recordset of this size. I have the site hosted in a shared environment and it uses a SQL2000 db. If you filter the search resutls, it's more reponsive (still fairly slow).
If you believe that the hosting server i'm using should be upgraded, what would be the best solution? Keep in mind that i want to be able to return way more than 500+ records in one go.
Thanks
Jakehttp://www.searchcontracts.comhttp://www.custommethod.comhttp://www.boozetour.com
Hi,
I've a xml file which I need to send over http to another server. The other server processes xml file and sends back xml response over http.
How can this be achieved in SSIS.
Thanks
Manish
Hi,
I've a xml file which I need to send over http to another server. The other server processes xml file and sends back xml response over http.
How can this be achieved in SSIS.
Thanks
Manish
Hi,
I have a problem using service broker, a send the message from server SSB1(initiator) and a receive this message on server SSB2(target), but I don't receive response to SSB1...
In my server SSB2 has this messages on Profiler:
- This message could not be delivered because it is a duplicate.
- Could not forward the message because forwarding is disabled in this SQL Server instance.
- The message could not be delivered because it could not be classified. Enable broker message classification trace to see the reason for the failure.
Message from SSB1 Profiler:
- This message was dropped because it could not be dispatched on time. State: 1
And the messages not end in both servers
Tks
Fernando Bueno
Is there a way I can remove the 30 seconds limit response time on sql server 2005?
View 1 Replies View Related
I am trying to use the time series algorithm to predict responses to promotion mailings for subscription renewals. The problem i am having is that response is largely influenced by the number of mailings that are sent out. Can anyone give me any ideas on how i can structure the dataset so that it would take into account how many promotions were sent out? any help would be greatly appreciated.
Frank
I am working with a client that after every reboot of there SQL 2000 DB server, they experience slow response time for a couple of hours. The server has 12 GB RAM and a Dual 3.8 processor. It is believed that the slow response is due to as queries run after the reboot, they are re-building information in memory and after the memory is built up, it goes back to the normal performance utilizing the memory for speed. Is this an accurate assumption or is there something else to be looking at after the server is rebooted?
Thanks,
JB
Script below returns 29 rows, must return 28!
Code Snippet
use master
select top 25 percent
id
from
(
select top 112
*
from
syscolumns
) d
order by
id desc
Script below returns 57 rows, must return 56!
Code Snippet
use master
select top 50 percent
id
from
(
select top 112
*
from
syscolumns
) d
order by
id desc
Reproducable on
Microsoft SQL Server 2000 - 8.00.2039 (Intel X86) May 3 2005 23:18:38 Copyright (c) 1988-2003 Microsoft Corporation Enterprise Edition on Windows NT 5.0 (Build 2195: Service Pack 4)
and
Microsoft SQL Server 2000 - 8.00.2039 (Intel X86) May 3 2005 23:18:38 Copyright (c) 1988-2003 Microsoft Corporation Developer Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
Could anyone from MS SQL server team clarify what's happened and WHAT TO DO?
Hello,
I need to know if I am able to use OLE DB connection strings without the username and password for Challenge/Response logins.
I have a web site that uses SSL and Challenge/Response to authenticate users, but my connection to the database is by embedding a generic username and password in the connection string.
I would like to leave that off and have the connection to the database use the challenge/response authentication when they first logged into the web site. This way I can control their permissions in SQL server.
I appreciate any help
Kevin