Simple (4 lines) stored procedure was working, now is timing out.
Profiler shows hundreds of lines and a lot of time doing:
EventClass: SQLTransaction
ObjectName: Cache Coherency
What are these lines profiler is capturing?
Why is the server doing this, and how can I stop it?
Thanks!
Hi,
I have scheduled full backup daily at morning 6:00. It was running fine till yesterday. Suddenly today morning it failed giving following error....
I have executed maintenance plan manually and again it gave same error....
10/19/2007 11:03:10,FullDBBackup.Subplan_1,Error,1,*****,FullDBBackup.Subplan_1,Subplan_1,,Executed as user: ****SYSTEM. ...9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:03:10 AM Error: 2007-10-19 11:03:10.98 Code: 0xC0010018 Source: Back Up Database (Full) Description: Error loading a task. The contact information for the task is "Back Up Database Task; Microsoft Corporation; Microsoft SQL Server v9; ? 2004 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1". This happens when loading a task fails. End Error Error: 2007-10-19 11:03:11.25 Code: 0xC00291EC Source: {C7FB73D1-ADF1-42C0-B3D5-9F8014CC206B} Execute SQL Task Description: Failed to acquire connection "Local server connection". Connection may not be configured correctly or you may not have the right permissions on this connection. End Error Warning: 2007-10-19 11:03:11.25 Code: 0x80019002 Source: OnPreExecute Description: SSIS Warning Code DT... The package execution fa... The step failed.,00:00:01,0,0,,,,0
Pls help me as daily backups are very crucial to me...
I'm running SQL Server Express 2005 on Windows XP.
I've been using SQL Server Express for the past month or so, and I've always been able to connect. Now all of a sudden I can't connect, it's giving me error 26.
I've always used Windows authentication with no need for a password.
I've been building a simple test application and things have been working all day. Suddenly, about a half an hour ago - I started getting this error every time I attempt to go to the main web page:
System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
I have no idea what changed... Can someone help me figure this out please?
Thanks!~A~
I've had this connection used for months and months. The setupQL Express + VS2008. In that particular app I use only one DB Connection but there are about 10 other Sql Server Dbs that I connect to in other apps.
I am still in a development stage.
Today I've decided to connect also via the Server Explorer in VS2008. All connections were established easy. Immediately after that a connection.Open ( ) statement failed with the error message
System.Data.SqlClient.SqlException: Cannot open user default database. Login failed.
At the Open statement I did a break and with Ctrl + Alt + E got all exceptions. They are too numerous to show in here. One of the messages I found was that the failure occured in System.dll.
Any ideas as to why it happened?
I disconnected (deleted) the DB in question--no change. I deleted ALL DB connections from the server explorer in VS2008 - no change. I see the only option now and that is to reinstall the VS2008. I am kind of sick and tired of doing it.
Also I've been trying to move on to Linq and it is my understanding that in order to do Linq I have to establish connections via VS2008 not just connection strings. Is it right? Perhaps I am mistaken?
This particular connection is not that crutial. I can survice without it with this app but for others it would be impossible to continue development.
Any help will be appreciated.
Thanks.
P.S.
Some additional information has transpired. I checked Sql Server Object Explorer and immediately determined that the DB in question lost ALL its tables. There was just an empty shell: the name, no tables, no system tables, no Programmability, nothing.
I "deleted" this DB and reconnected it. The connection with my app miraculously restored itself. Now I could run the app with no problem and the connection to this DB could be Opened in the app. However, when I tried to set up the connection again in the Server Explorer of VS2008 the same thing promptly happened. Now I got this exception back.
It is not the way VS2005 behaved. Is it normal?
Thanks.
Hi Everybody !!
I have a problem with SQL mail on SQL 6.5 with SP 5a . I have created a job called as mailtest and is scheduled to run every morning .
The task was running successfully till last week when suddenly it stopped responding on some of the SQL 6.5 Servers .
When i stop the SQL Mail and start again through the Enterprise Manager , and then run the task , it shows as successful .
Every morning i have to do it to check whether the mailtest is O.K .
But the automated mailtest task has stopped suddenly . I have checked the MAPI profile and is correct as the same is configured on other servers on which my mailtest runs successful.
Can somebody guess what the problem could be ?
Thanks for your help in advance .
Regards
Ashish.
Hi:
Did you have any experience that all publications and their related jobs suddenly disappear?
I had a transactional pull replication between two servers, and distributor and subscriber in the same box; publisher was an AA cluster server.
The schedule of pulling was once a week.
Last Friday morning everything was working perfectly, but I found all publications and their related jobs disappear around 5pm
I checked with the sysadmin and he said nothing was changed on that period.
Did you have any idea about it?
Did you have any idea that I can prevent this happen again or any alert I can set up to monitor who drop it, when it was dropped and so on?
It is a SQL 2000 box and system table doest not take trigger.
Thanks in advance
Theresa
Hi all,
This issue is on PRODUCTION.
The server is in use almost a year now, but suddenly this afternoon , i saw that Management Studio is missing in start --> Sql Server 2005 --> Management Studio is missing here. ( SQL Server 2005 , Standard Edition, 32-bit, SP1 )
Could somebody tell what could be the reason and how to fix it.
What i need to do , so that i get back the management studio & where should i go & investigate what file is missing.
Any help is greatly appreciated.
Thanks.
Hello All
I hope somebody can help. This is the second time I've seen this issue. The first time I thought it was a one off, but now I'm getting concerned.
I have two clients - one had Merge replication set up on a database that had a log log file that just grew and grew. The database was set to SIMPLE recovery. I could understand the log file growing if it was set up for transactional replication, but it wasn't transactional, just merge. Looking in sys.databasese the log_reuse column was set to REPLICATION.
I ran the sp_repldone stored proc on this database and all was well - I could shrink the log file down to a reasonable size. This server was SQL Server 2005, Service Pack 2.
Now I have yet another client who has a growing transaction log file. Low and behold the log_reuse for the database is set to REPLICATION again. This server has never had any type of replication set up at all!!!! The log file is still growing and DBCC OPENTRAN indicates undistributed transcations. This particular server is SQL Server 2005 Service Pack 1.
Can someone PLEASE shed some light on what's going on here? Is there some kind of bug that I don't know about? Searching Goolgle Groups seems to indicate that other people have had this problem, and they have have to set up replication and run sp_repldone to resolve it, but that's surely uncalled for on a database that has never seen replication?
Thanks
SQLGal2
Can anyone help me?
My brand new installation of SQL Server 6.5 running on Windows 2000 suddenly stops working for about 6 minutes, in this periods no one can use SQL 6.5 services because it stops responding. My logs is show below:
2002/04/08 15:50:22.60 ods Error : 17832, Severity: 18, State: 0
2002/04/08 15:50:22.60 ods Unable to read login packet(s).
2002/04/08 15:50:24.50 ods Error : 17832, Severity: 18, State: 0
2002/04/08 15:50:24.50 ods Unable to read login packet(s).
2002/04/08 15:50:26.79 ods Error : 17832, Severity: 18, State: 0
2002/04/08 15:50:26.79 ods Unable to read login packet(s).
2002/04/09 07:10:21.48 ods Error : 17832, Severity: 18, State: 0
2002/04/09 07:10:21.48 ods Unable to read login packet(s).
2002/04/09 07:53:33.76 ods Error : 17824, Severity: 10, State: 0
2002/04/09 07:53:33.76 ods Unable to write to ListenOn connection '.pipesqlquery', loginname 'sa', hostname '2M_ROSANNA'.
2002/04/09 07:53:33.76 ods OS Error : 232,
2002/04/09 07:53:33.78 spid75 Error : 1608, Severity: 21, State: 2
2002/04/09 07:53:33.78 spid75 A network error was encountered while sending results to the front end. Check the SQL Server errorlog for more information.
2002/04/09 07:53:41.10 ods Error : 17824, Severity: 10, State: 0
2002/04/09 07:53:41.10 ods Unable to write to ListenOn connection '.pipesqlquery', loginname 'sa', hostname 'CE_SANDRA'.
2002/04/09 07:53:41.10 ods OS Error : 232,
2002/04/09 07:53:41.10 spid80 Error : 1608, Severity: 21, State: 2
2002/04/09 07:53:41.10 spid80 A network error was encountered while sending results to the front end. Check the SQL Server errorlog for more information.
2002/04/09 07:55:42.20 ods Error : 17824, Severity: 10, State: 0
2002/04/09 07:55:42.20 ods Unable to write to ListenOn connection '.pipesqlquery', loginname 'sa', hostname 'CE_SANDRA'.
2002/04/09 07:55:42.20 ods OS Error : 232,
2002/04/09 07:55:42.20 spid53 Error : 1608, Severity: 21, State: 2
2002/04/09 07:55:42.20 spid53 A network error was encountered while sending results to the front end. Check the SQL Server errorlog for more information.
2002/04/09 07:57:09.40 ods Error : 17824, Severity: 10, State: 0
2002/04/09 07:57:09.40 ods Unable to write to ListenOn connection '.pipesqlquery', loginname 'sa', hostname 'FE_FERTILIDAD'.
2002/04/09 07:57:09.40 ods OS Error : 232,
2002/04/09 07:57:09.40 spid91 Error : 1608, Severity: 21, State: 2
2002/04/09 07:57:09.40 spid91 A network error was encountered while sending results to the front end. Check the SQL Server errorlog for more information.
2002/04/09 07:57:09.40 ods Error : 17824, Severity: 10, State: 0
2002/04/09 07:57:09.40 ods Unable to write to ListenOn connection '.pipesqlquery', loginname 'sa', hostname 'SF_ROSA'.
2002/04/09 07:57:09.40 ods OS Error : 232,
2002/04/09 07:57:09.40 spid11 Error : 1608, Severity: 21, State: 2
2002/04/09 07:57:09.40 spid11 A network error was encountered while sending results to the front end. Check the SQL Server errorlog for more information.
2002/04/09 07:57:36.04 ods Error : 17824, Severity: 10, State: 0
2002/04/09 07:57:36.04 ods Unable to write to ListenOn connection '.pipesqlquery', loginname 'sa', hostname 'CE_MILAGROS'.
2002/04/09 07:57:36.04 ods OS Error : 232,
2002/04/09 07:57:36.04 spid60 Error : 1608, Severity: 21, State: 2
2002/04/09 07:57:36.04 spid60 A network error was encountered while sending results to the front end. Check the SQL Server errorlog for more information.
The problems begin on 2002/04/09 at 7:53am. and it respond again at 7:57, there's no need to restart the service.
I will appreciate some help here.
Hi EveryOne,
WIndows 2003 sp2 and sqlserver 2005 standard edition -sp2.
Found following erors in The cluster and event logs.
error: [sqsrvres] CheckQueryProcessorAlive: sqlexecdirect
failed
error: [sqsrvres] OnlineThread: QP is not online.
error: [sqsrvres] printODBCError: sqlstate = HYT00;
native error = 0; message = [Microsoft][ODBC SQL Server
Driver]Timeout expired
[sqsrvres] printODBCError: sqlstate = 08S01; native error = 0; message = [Microsoft][SQL Native Client]Communication link failure
[sqagtres] SvcStop: service did not stop; giving up.
[sqsrvres] OnlineThread: asked to terminate while waiting for QP.
SQL Server is terminating in response to a 'stop' request from Service Control Manager
Earlier we had sudden Sql agent restart but this time sql server services were restarted .
What could be he reasons for this.
This machine has 64 GB ram and sql server has been alloted 30 Gb.
I found 30 Gb Usage in the dump file of Sqlserver
Can a memory Starved sql server could be a rason why sql server would have restarted
Thanks,
Gautham.R
I have a sp that was taking very little time (about 34 sec). But suddenly is stacked. It is running and running and running but not LOCKED neither SUSPENDED. It is always RUNNABLE. I have made Index and statistics optimization but nothing. I looked into execution plan but everything seems ok. All the time is in 3 indexes that are Index Seek and not Table Scan!!! So why is stacked... I do not know how much time it takes because I have to stop it. (SQL SERVER 2008 R2, the database was migrated from SQL SERVER 2000)
View 6 Replies View RelatedAttempting to write to a flat file, I get the following Warning then Errors:
~~~~~~~~~~~~~~~~~~
Warning: 0x80070005 at Data Flow Task, Detail to dat File Writer [54]: Access is denied.
Error: 0xC020200E at Data Flow Task, Detail to dat File Writer [54]: Cannot open the datafile "DetailOutWhat_1.dat".
Error: 0xC004701A at Data Flow Task, DTS.Pipeline: component "Detail to dat File Writer" (54) failed the pre-execute phase and returned error code 0xC020200E.
~~~~~~~~~~~~~~~~~~~
There should be no reason that this project can't open DetailOutWhat_1.dat, as it has successfully done it earlier today...
UNRELATED: Is it possible to comment out a transform or destination file while in the Designer View?
Thanks!
Jim Work
This is strange.
We use Merge (pull) replication to get data from the "mother ship" updated to the laptops of 15 sales reps before they head out into the field, where they work disconnected. At end of day, they all reconnect and all the data is once again shared.
We've been having problems with the replication, but that's another topic.
This morning, I logged onto the server to check the replication monitor, and found that all of the subscriber names for that particular subscription are blank! They show the open/close bracket ( [] ) followed by the database name. This is under the My Publishers >> [server name] >> [publication name] node in the explorer tree. If I try to double-click on one of the subscribers to get their detail, I get tne message, "Replication Monitor could not open the Detail Window." and "Specified cast is not valid".
If I look at the publication in SQL Server Management Studio, all of the subscriber names show up just fine. But they do NOT show up under Replication Monitor.
No one touched the database over the weekend, and this was working just fine on Friday afternoon.
Has anyone seen this before? What to do?
Hello...
We have had Merge Replication working for the past few months (SQL 2005 to SQL Mobile) and suddenly today the replication URL that points to the SqlCESA30.DLL does not work. I have tried re-running the SQL Mobile virtual folder wizard a few times....resetting IIS and even a re-boot...and still the URL is not available.
Is there anything that might provide some clue as to why this has unexpectedly failed?
thanks for any help!
- will
I recently installed a trial version of Sql12k on my laptop. Since 1st of November I've been creating tables without problems (15) and different schemas.I would like to emphasize that both mdf and ldf files are allocated in my USB3 portable disk. is that a problems for Sql12K? SSMS had stuck just for 20 sec or so. Then, system itself kill the task. A huge surprise when I restarted again... all the databases including the last one.. without objects. I mean, user databases...
Where are my logins? Where are my tables and schemas? Jesus christ.Sql logs inform the following (in all the moment my USB hardisk was properly connected)
11/08/2015 16:00:30,spid19s,Unknown,The operating system returned error 21(El dispositivo no está listo.) to SQL Server during a read at offset 0x000000 00140000 in file 'f:enriccopia_de_bbbb.mdf'. Additional messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency
[code]....
suddenly I'm getting a connect to server error dialogue box that says...
Cannot connect to serverinstance name
Additional information
The operation could not be completed. (WinMgmt)
...when trying to connect to RS2005 Server in Management Studio. I can reach Reporting Manager thru IE and run my reports.
Is it possible that my setting IIS to basic authentication (and turning off Windows Integrated) might be preventing me from connecting in MS, perhaps because MS has to go thru the RS service and doesnt know what basic auth is?
I'm temporarily unable to set IIS back to Windows Auth cuz the server is being used by users to test reports.
This morning, when I look at my error logs, the following appears;
Msg 0, Level 11, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.
Msg 0, Level 20, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.
If I remove the contains() part from the SQL Stored Procedure, it stills runs. So, in other words, suddenly contains() started making the query crash.
I'm running SQL Server 2008 R2.
Hi - I hope some of you can help me with this problem.
I'm trying to run the snapshot agent for 77 published tables, but the agent stops suddenly uninterrupted. It stops in the middle of taking a snapshot of a table containing 81,719,531 rows. The error message is pasted below.
Message
2006-06-14 05:33:33.53 [89%] Bulk copied 100000 rows from "ORAMSSQLREPL"."HREPL_ARTICLE_21_21" (57200000 total rows copied)
2006-06-14 05:34:12.57 [89%] Bulk copied 100000 rows from "ORAMSSQLREPL"."HREPL_ARTICLE_21_21" (57300000 total rows copied)
2006-06-14 05:34:51.23 [89%] Bulk copied 100000 rows from "ORAMSSQLREPL"."HREPL_ARTICLE_21_21" (57400000 total rows copied)
2006-06-14 05:35:29.99 [89%] Bulk copied 100000 rows from "ORAMSSQLREPL"."HREPL_ARTICLE_21_21" (57500000 total rows copied)
2006-06-14 05:36:09.82 [89%] Bulk copied 100000 rows from "ORAMSSQLREPL"."HREPL_ARTICLE_21_21" (57600000 total rows copied)
2006-06-14 05:36:49.38 [89%] Bulk copied 100000 rows from "ORAMSSQLREPL"."HREPL_ARTICLE_21_21" (57700000 total rows copied)
2006-06-14 05:37:28.56 [89%] Bulk copied 100000 rows from "ORAMSSQLREPL"."HREPL_ARTICLE_21_21" (57800000 total rows copied)
2006-06-14 05:37:35.36 [89%] The replication agent was shut down in response to an abort request.
Does anyone know what is causing this error and how I can possibly solve it?
Best Regards,
JB Plum
Hi
I have a query which executes in 1 second and returning 14 rows whenever I execute it through Management Studio but when I execute it from a web page I am getting a timeout message and the stack trace is pointing towards the line which calls the stored procedure. The query is quite complex and there quite a few joins on tables and views including one to a lookup table, whenever I take out join onto the look up table the web page runs ok without timing out. I join the Lookup table (Parts) using a Left Outer Join similar to below. The syntax of the Join is fine but I cant find why it would cause the query to time out when executed from a webpage but is fine when I execute it from Management Studio
select *
from tables/view LEFT OUTER JOIN
Parts on Parts.PartNumber=tables/View.PartNumber
I've tried recompiling the Parts table but it didnt make any difference.
Any help would be much appreciated.
Cheers,
Frankie
I use SQL Server to provide data to asp web pages and have recently started to get ODBC time outs throughout the day.
The environment is as follows:
Server with dual PII processors & 512MB RAM running:
- SQL Server 7
- IIS
I have a number of asp based web sites hosted on this box, but only 1 of them seems to be affected by the time out problem. I have checked the resources on the server (NT Task Mgr - Memoey & Processor) and everything seems fine - in fact the resources are hardly being touched!!!
Within a few minutes the problem disappears completely without me doing anything.
Am I missing something here?
Should I look elsewhere other than SQL - maybe IIS ???
Any suggestions / pointers would be very much appreciated.
Thx
We are using asp's and tables sucessfully but when we click a link to an exe on a page it is slow, to the point of timing out. Very slow. Any help would be appreciated. Email me tperry@kpmg.com
Tim
Does anyone know how to time a DTS package?
Thanks
What could be the reason for my view to timeout? I thought it was because of the number or records, but i guessed wrong. The view is grabbing data from a UDF i have created.
View 1 Replies View RelatedI am trying to use statistics to get the time it takes to run a sql function. When I use SET STATISTICS TIME ON it returns multiple results (one for each insert statement in my loop). Is there any way to get results for the ENTIRE function? Here is the loop that I am timing.--> (It simply populates a calendar table)
SET NOCOUNT ON
DECLARE @Counter INT
DECLARE @ActualDateDATETIME
DECLARE @FirstDateDATETIME
SET @Counter = 1
SET @FirstDate = '1/1/1900'
SET @ActualDate = @FirstDate
WHILE @Counter < 43830
BEGIN
INSERT INTO Calendar(ActualDate)
values(@ActualDate)
SET @ActualDate = DATEADD(day, @Counter, @FirstDate)
SET @Counter = @Counter + 1
END
Can anyone tell me as to how I can Timeout a transaction. For example I have transactiopn that pulls in data from a remote source. So if the time of extraction exceeds sometime say 1hr..I need to rollback the transaction.
Cannot use Set Lock_Time out because it can be used only for timing out a waiting process. Here I want to timeout the executing process
Regards
Manmeet
How can I easily time a query entered in Studio Express for SQL Server 2005? Thanks in advance.
View 11 Replies View RelatedHi. I'm new to SQL Server programming. I'm using it at my new job for the first time and catching on quickly. I've run into a problem where I run a request via interactive query and it times out. It's really annoying because it seems to happy a lot. Is this just a memory issue with my machine (it has 2.8 GB of RAM) or there a way around it?
Thanks!
Hi all,i have 97 honda CR-V with about 100,000 KM on it. i checked a doc onHonda web site and it said that 60,000 miles is point to change timingbelt. compared with other Honda cars, it is pretty low. is it correct? ifyes, do you know the reason??thanks for your help,jj
View 2 Replies View RelatedI'm using SQL 2k.
I wrote a query using the query analizer and tested it before turning it into a Stored Procedure. It worked fine an the execution time was acceptable (25 secs, since there was a lot of data to analize)
When I executed the recently created stored procedure, the execution time happened to be three or four times higher. (1 min, 38 secs)
It was the exact same code, i was logged in the same database server, the parameters were the same in btoh cases. So, my question is as follows:
Why is it that executing a script and executing a stored procedure with the exact same script differ so much in timing?
I am creating an index on a table wit 35 million records but I get the error
'TT_ObjPerformance' table- Unable to create index 'IX_TT_ObjPerformance_CACode'. Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
How can I get the index created?
ThanksSQL Server newbie
Hi Guys,
Anyone knows if there is a SQL equivalent of Oracle SET TIMING ON to give the excution time in milli/centi Seconds?
Cheers,
xiaobing
I am trying to run a program that works on another site but with a copy of the database(SQL6.5) and the vb front end I keep getting a timeout error.
The vb bit is trying to run an update statement on a table with just over 2000 rows. I cannot amend the vb side because this is an .exe
Is there something I might not have done on the server that could be causing this not to work, i.e configuration issues, bigger logs
Please help!!