I was having a problem installing SP1, it would barely get started before it would fail. I found it had to do with having many of my databases on an external USB drive. I detached all of those databases, rebooted the machine and then attempted to re-install the Service Pack. This time everything worked fine. Just passing it along in case someone else ran into this.
View 2 RepliesHi,
I first attempted to install SQL Server 2005 with the management tools, SQL server services installed ok but the management tools did not install. I tried to re-install the management tools but the setup program thought that they were already installed. I then un-installed everything in Add/Remove programs, & rebooted. I then tried to install again but this time it thought that the SQL server services were already installed. I removed the services from the registry and rebooted again. Now when I try to install SQL Server 2005 it simply fails
The last message in the log is "Note: 1: 1708
MSI (s) (A0:6C) [15:34:23:656]: Product: Microsoft SQL Server 2005 -- Installation failed"
Any help would be appreciated
MSI (s) (A0:6C) [15:34:22:593]: Note: 1: 1402 2: HKEY_LOCAL_MACHINESoftwareMicrosoftMicrosoft SQL ServerMSSQL.1MSSQLServer 3: 2
MSI (s) (A0:6C) [15:34:22:593]: Note: 1: 1325 2: v2.0.50727
MSI (s) (A0:6C) [15:34:22:593]: PROPERTY CHANGE: Adding ASPNET_EVENTLOGDLL.6BAD20EB_8CBD_4950_9F16_9F83B608665D property. Its value is 'C:WINDOWSMicrosoft.NETFrameworkv2.0.50727EventLogMessages.dll'.
MSI (s) (A0:6C) [15:34:22:593]: Note: 1: 1402 2: HKEY_LOCAL_MACHINESoftwareMicrosoftMicrosoft SQL ServerMSSQL.1Replication 3: 2
MSI (s) (A0:6C) [15:34:22:593]: Note: 1: 1402 2: HKEY_LOCAL_MACHINESoftwareMicrosoftMicrosoft SQL ServerMSSQL.1Replication 3: 2
MSI (s) (A0:6C) [15:34:22:609]: Doing action: DetectSKUOS.D20239D7_E87C_40C9_9837_E70B8D4882C2
Action ended 15:34:22: AppSearch. Return value 1.
MSI (s) (A0:74) [15:34:22:609]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI2B6.tmp, Entrypoint: DetectSKUOS
Action start 15:34:22: DetectSKUOS.D20239D7_E87C_40C9_9837_E70B8D4882C2.
<Func Name='LaunchFunction'>
Function=DetectSKUOS
<Func Name='SetCAContext'>
<EndFunc Name='SetCAContext' Return='T' GetLastError='0'>
Doing Action: DetectSKUOS
PerfTime Start: DetectSKUOS : Thu Feb 22 15:34:22 2007
<Func Name='DetectSKUOS'>
VersionNT/64 detected
MsiNTProductType = 3
OS type: 0xf0000000, supported: 0xfff0ff00
<EndFunc Name='DetectSKUOS' Return='0' GetLastError='0'>
PerfTime Stop: DetectSKUOS : Thu Feb 22 15:34:22 2007
<EndFunc Name='LaunchFunction' Return='0' GetLastError='0'>
MSI (s) (A0:6C) [15:34:22:687]: Skipping action: DetectWYukonOS.D20239D7_E87C_40C9_9837_E70B8D4882C2 (condition is false)
MSI (s) (A0:6C) [15:34:22:687]: Skipping action: SetErrorReporting (condition is false)
MSI (s) (A0:6C) [15:34:22:687]: Skipping action: SetSqmReporting (condition is false)
MSI (s) (A0:6C) [15:34:22:687]: Doing action: SetEnableRanu
Action ended 15:34:22: DetectSKUOS.D20239D7_E87C_40C9_9837_E70B8D4882C2. Return value 1.
MSI (s) (A0:6C) [15:34:22:687]: PROPERTY CHANGE: Modifying SqlEnableRanu property. Its current value is '0'. Its new value: '1'.
Action start 15:34:22: SetEnableRanu.
MSI (s) (A0:6C) [15:34:22:687]: Doing action: CCPSearch
Action ended 15:34:22: SetEnableRanu. Return value 1.
MSI (s) (A0:6C) [15:34:22:687]: Note: 1: 2205 2: 3: CCPSearch
MSI (s) (A0:6C) [15:34:22:687]: Note: 1: 2228 2: 3: CCPSearch 4: SELECT `Signature_` FROM `CCPSearch`
Action start 15:34:22: CCPSearch.
MSI (s) (A0:6C) [15:34:22:687]: Doing action: RMCCPSearch
Action ended 15:34:22: CCPSearch. Return value 0.
MSI (s) (A0:6C) [15:34:22:687]: Note: 1: 2205 2: 3: CCPSearch
MSI (s) (A0:6C) [15:34:22:687]: Note: 1: 2228 2: 3: CCPSearch 4: SELECT `Signature_` FROM `CCPSearch`
Action start 15:34:22: RMCCPSearch.
MSI (s) (A0:6C) [15:34:22:687]: Doing action: RestoreProductID
Action ended 15:34:22: RMCCPSearch. Return value 0.
MSI (s) (A0:20) [15:34:22:703]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI2B7.tmp, Entrypoint: RestoreProductID
Action start 15:34:22: RestoreProductID.
<Func Name='LaunchFunction'>
Function=RestoreProductID
<Func Name='SetCAContext'>
<EndFunc Name='SetCAContext' Return='T' GetLastError='0'>
Doing Action: RestoreProductID
PerfTime Start: RestoreProductID : Thu Feb 22 15:34:22 2007
<Func Name='RestoreProductID'>
<EndFunc Name='RestoreProductID' Return='0' GetLastError='0'>
PerfTime Stop: RestoreProductID : Thu Feb 22 15:34:22 2007
<EndFunc Name='LaunchFunction' Return='0' GetLastError='0'>
MSI (s) (A0:6C) [15:34:22:765]: Doing action: SetShowPID
Action ended 15:34:22: RestoreProductID. Return value 1.
MSI (s) (A0:6C) [15:34:22:781]: PROPERTY CHANGE: Adding ShowPID property. Its value is '1'.
Action start 15:34:22: SetShowPID.
MSI (s) (A0:6C) [15:34:22:781]: Doing action: ValidatePID
Action ended 15:34:22: SetShowPID. Return value 1.
MSI (s) (A0:50) [15:34:22:781]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI2B8.tmp, Entrypoint: ValidateProductID
MSI (s) (A0!58) [15:34:22:843]: PROPERTY CHANGE: Adding CCPTrigger property. Its value is '2'.
MSI (s) (A0!58) [15:34:22:843]: PROPERTY CHANGE: Adding PKU property. Its value is '0'.
MSI (s) (A0!58) [15:34:22:843]: PROPERTY CHANGE: Adding PIDSEQ property. Its value is '271000003'.
MSI (s) (A0!58) [15:34:22:843]: PROPERTY CHANGE: Adding PID property. Its value is '**********'.
MSI (s) (A0!58) [15:34:22:843]: PROPERTY CHANGE: Adding ProductID property. Its value is '**********'.
MSI (s) (A0!58) [15:34:22:843]: PROPERTY CHANGE: Adding DPID property. Its value is '**********'.
MSI (s) (A0!58) [15:34:22:843]: PROPERTY CHANGE: Adding DigitalProductID property. Its value is '**********'.
MSI (s) (A0!58) [15:34:22:843]: PROPERTY CHANGE: Adding PIDRET property. Its value is '0'.
Action start 15:34:22: ValidatePID.
MSI (s) (A0:6C) [15:34:22:843]: Doing action: DetectProductID
Action ended 15:34:22: ValidatePID. Return value 1.
MSI (s) (A0:20) [15:34:22:859]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI2B9.tmp, Entrypoint: DetectProductID
Action start 15:34:22: DetectProductID.
<Func Name='LaunchFunction'>
Function=DetectProductID
<Func Name='SetCAContext'>
<EndFunc Name='SetCAContext' Return='T' GetLastError='0'>
Doing Action: DetectProductID
PerfTime Start: DetectProductID : Thu Feb 22 15:34:22 2007
<Func Name='DetectProductID'>
<EndFunc Name='DetectProductID' Return='0' GetLastError='0'>
PerfTime Stop: DetectProductID : Thu Feb 22 15:34:22 2007
<EndFunc Name='LaunchFunction' Return='0' GetLastError='0'>
MSI (s) (A0:6C) [15:34:22:937]: Doing action: SetPIDKEY
Action ended 15:34:22: DetectProductID. Return value 1.
MSI (s) (A0:6C) [15:34:22:937]: PROPERTY CHANGE: Deleting PIDKEY property. Its current value is '**********'.
Action start 15:34:22: SetPIDKEY.
MSI (s) (A0:6C) [15:34:22:937]: Doing action: SetValidMOFInstanceNameProp.D20239D7_E87C_40C9_9837_E70B8D4882C2
Action ended 15:34:22: SetPIDKEY. Return value 1.
MSI (s) (A0:4C) [15:34:22:953]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI2BA.tmp, Entrypoint: SetValidMOFInstanceNameProp
Action start 15:34:22: SetValidMOFInstanceNameProp.D20239D7_E87C_40C9_9837_E70B8D4882C2.
<Func Name='LaunchFunction'>
Function=SetValidMOFInstanceNameProp
<Func Name='SetCAContext'>
<EndFunc Name='SetCAContext' Return='T' GetLastError='0'>
Doing Action: SetValidMOFInstanceNameProp
PerfTime Start: SetValidMOFInstanceNameProp : Thu Feb 22 15:34:23 2007
<Func Name='SetValidMOFInstanceNameProp'>
MSI (s) (A0!60) [15:34:23:109]: PROPERTY CHANGE: Adding ValidMOFInstanceName property. Its value is '1'.
Setting ValidMofInstanceName to 1
<EndFunc Name='SetValidMOFInstanceNameProp' Return='0' GetLastError='0'>
PerfTime Stop: SetValidMOFInstanceNameProp : Thu Feb 22 15:34:23 2007
<EndFunc Name='LaunchFunction' Return='0' GetLastError='0'>
MSI (s) (A0:6C) [15:34:23:109]: Doing action: CostInitialize
Action ended 15:34:23: SetValidMOFInstanceNameProp.D20239D7_E87C_40C9_9837_E70B8D4882C2. Return value 1.
MSI (s) (A0:6C) [15:34:23:125]: Machine policy value 'MaxPatchCacheSize' is 10
Action start 15:34:23: CostInitialize.
MSI (s) (A0:6C) [15:34:23:125]: PROPERTY CHANGE: Adding ROOTDRIVE property. Its value is 'D:'.
MSI (s) (A0:6C) [15:34:23:125]: PROPERTY CHANGE: Adding CostingComplete property. Its value is '0'.
MSI (s) (A0:6C) [15:34:23:125]: Transforming table Component.
MSI (s) (A0:6C) [15:34:23:125]: Transforming table Component.
MSI (s) (A0:6C) [15:34:23:125]: Transforming table Component.
MSI (s) (A0:6C) [15:34:23:125]: Note: 1: 2205 2: 3: Patch
MSI (s) (A0:6C) [15:34:23:125]: Note: 1: 2205 2: 3: PatchPackage
MSI (s) (A0:6C) [15:34:23:125]: Note: 1: 2205 2: 3: MsiPatchHeaders
MSI (s) (A0:6C) [15:34:23:125]: Note: 1: 2205 2: 3: __MsiPatchFileList
MSI (s) (A0:6C) [15:34:23:125]: Note: 1: 2205 2: 3: PatchPackage
MSI (s) (A0:6C) [15:34:23:125]: Note: 1: 2228 2: 3: PatchPackage 4: SELECT `DiskId`, `PatchId`, `LastSequence` FROM `Media`, `PatchPackage` WHERE `Media`.`DiskId`=`PatchPackage`.`Media_` ORDER BY `DiskId`
MSI (s) (A0:6C) [15:34:23:125]: Doing action: SetFTSearchProperties.D20239D7_E87C_40C9_9837_E70B8D4882C2
Action ended 15:34:23: CostInitialize. Return value 1.
MSI (s) (A0:C4) [15:34:23:140]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI2BC.tmp, Entrypoint: SetFTSearchProperties
Action start 15:34:23: SetFTSearchProperties.D20239D7_E87C_40C9_9837_E70B8D4882C2.
<Func Name='LaunchFunction'>
Function=SetFTSearchProperties
<Func Name='SetCAContext'>
<EndFunc Name='SetCAContext' Return='T' GetLastError='0'>
Doing Action: SetFTSearchProperties
PerfTime Start: SetFTSearchProperties : Thu Feb 22 15:34:23 2007
<Func Name='SetFTSearchProperties'>
MSI (s) (A0!C0) [15:34:23:250]: PROPERTY CHANGE: Modifying FTERudeInstName.68C6D15C_77E0_11D5_8528_00C04F68155C property. Its current value is 'MSSQLSERVER'. Its new value: 'MSSQL.1'.
FTS Property Name: FTEInstName.68C6D15C_77E0_11D5_8528_00C04F68155C set
MSI (s) (A0!C0) [15:34:23:250]: PROPERTY CHANGE: Modifying FTERegRoot.68C6D15C_77E0_11D5_8528_00C04F68155C property. Its current value is 'SoftwareMicrosoftMSSQLSERVERMSSearch'. Its new value: 'SOFTWAREMicrosoftMicrosoft SQL ServerMSSQL.1MSSearch'.
FTS Property Name: FTERudeInstName.68C6D15C_77E0_11D5_8528_00C04F68155C set
MSI (s) (A0!C0) [15:34:23:250]: PROPERTY CHANGE: Adding FTEInstanceSubDir.68C6D15C_77E0_11D5_8528_00C04F68155C property. Its value is 'MSSQL.1MSSQL'.
FTS Property Name: FTERegRoot.68C6D15C_77E0_11D5_8528_00C04F68155C set
FTS Property Name: FTEInstanceSubDir.68C6D15C_77E0_11D5_8528_00C04F68155C set
FTS Property Name: FTEClusterSec.68C6D15C_77E0_11D5_8528_00C04F68155C set
<EndFunc Name='SetFTSearchProperties' Return='0' GetLastError='0'>
PerfTime Stop: SetFTSearchProperties : Thu Feb 22 15:34:23 2007
<EndFunc Name='LaunchFunction' Return='0' GetLastError='0'>
MSI (s) (A0:6C) [15:34:23:265]: Doing action: FileCost
Action ended 15:34:23: SetFTSearchProperties.D20239D7_E87C_40C9_9837_E70B8D4882C2. Return value 1.
MSI (s) (A0:6C) [15:34:23:281]: Note: 1: 2262 2: Class 3: -2147287038
MSI (s) (A0:6C) [15:34:23:281]: Note: 1: 2262 2: Extension 3: -2147287038
MSI (s) (A0:6C) [15:34:23:281]: Note: 1: 2262 2: TypeLib 3: -2147287038
Action start 15:34:23: FileCost.
MSI (s) (A0:6C) [15:34:23:281]: Doing action: IsolateComponents
Action ended 15:34:23: FileCost. Return value 1.
Action start 15:34:23: IsolateComponents.
MSI (s) (A0:6C) [15:34:23:281]: Doing action: SQLLicensing.D20239D7_E87C_40C9_9837_E70B8D4882C2
Action ended 15:34:23: IsolateComponents. Return value 0.
MSI (s) (A0:50) [15:34:23:296]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI2BD.tmp, Entrypoint: SQLLicensing
Action start 15:34:23: SQLLicensing.D20239D7_E87C_40C9_9837_E70B8D4882C2.
<Func Name='LaunchFunction'>
Function=SQLLicensing
<Func Name='SetCAContext'>
<EndFunc Name='SetCAContext' Return='T' GetLastError='0'>
Doing Action: SQLLicensing
PerfTime Start: SQLLicensing : Thu Feb 22 15:34:23 2007
<Func Name='SQLLicensing'>
<EndFunc Name='SQLLicensing' Return='0' GetLastError='0'>
PerfTime Stop: SQLLicensing : Thu Feb 22 15:34:23 2007
<EndFunc Name='LaunchFunction' Return='0' GetLastError='0'>
MSI (s) (A0:6C) [15:34:23:375]: Doing action: CAResolveInstanceName.68C6D15C_77E0_11D5_8528_00C04F68155C
Action ended 15:34:23: SQLLicensing.D20239D7_E87C_40C9_9837_E70B8D4882C2. Return value 1.
MSI (s) (A0:54) [15:34:23:390]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI2BE.tmp, Entrypoint: ResolveInstanceName
Action start 15:34:23: CAResolveInstanceName.68C6D15C_77E0_11D5_8528_00C04F68155C.
FTECa.DLL: INFO: FTE: ResolveInstanceName(), Entering...
FTECa.DLL: INFO: FTE: This is NOT an Exchange Server install...
FTECa.DLL: INFO: ResolveInstanceName: FTEInstName obtained: MSSQLSERVER
FTECa.DLL: INFO: ResolveInstanceName: FTERudeInstName obtained: MSSQL.1
FTECa.DLL: INFO: LookupInstanceId: Iterating the key: 1
FTECa.DLL: ERROR: LookupInstanceId: RegQueryValueEx(RudeName) failed. Err = 2
Action ended 15:34:23: CAResolveInstanceName.68C6D15C_77E0_11D5_8528_00C04F68155C. Return value 3.
Action ended 15:34:23: INSTALL. Return value 3.
Property(S): ProductCode = {FFFA78A7-BD51-4255-8470-C4D4A85B49F5}
Property(S): ProductLanguage = 1033
Property(S): Manufacturer = Microsoft Corporation
Property(S): ProductVersion = 9.00.1399.06
Property(S): MEDIAPACKAGEPATH = Setup
Property(S): ALLUSERS = 1
Property(S): NULLGUID = {00000000-0000-0000-0000-000000000000}
Property(S): ASPNetVersion = 2.0.50727
Property(S): ARPHELPLINK = http://go.microsoft.com/fwlink/?LinkId=52152
Property(S): ARPPRODUCTICON = ARPIcon.ico
Property(S): ARPNOREPAIR = 1
Property(S): ARPSYSTEMCOMPONENT = 1
Property(S): MsiHiddenProperties = SQLPASSWORD;AGTPASSWORD;ASPASSWORD;RSPASSWORD;SQLBROWSERPASSWORD;RSSQLPASSWORD;RSSQLPassword;RSSQLPasswordQuoted;RSSETUPPASSWORD;RSSetupPassword;SAPWD;saPWD;UPGRADEPWD;SqlUpgradePwd;SQLPassword;ServicePassword;ADMINPASSWORD;PIDKEY;FTEPassword.68C6D15C_77E0_11D5_8528_00C04F68155C;checksum.7354AFCB_913B_4E9F_B76C_2376101FDE0C;checksum.;DigitalProductID;DPID;Do_sqlScript.D20239D7_E87C_40C9_9837_E70B8D4882C2;Rollback_SqlConnection.D20239D7_E87C_40C9_9837_E70B8D4882C2;Do_XmlSingleNode.D20239D7_E87C_40C9_9837_E70B8D4882C2;Do_RSSetting.D20239D7_E87C_40C9_9837_E70B8D4882C2;PID;ProductID;RSUPGRADEPASSWORD;Do_RSSetSharePointExclusionPath.D20239D7_E87C_40C9_9837_E70B8D4882C2
Property(S): SecureCustomProperties = SQL_SHOWLIC;UPGRADESQL90
Property(S): SqlServerBuild = 1
Property(S): SqlCluster = 0
Property(S): INSTALLLEVEL = 90
Property(S): FXAssemblyVersion = 2.0.0.0
Property(S): VSAssemblyVersion = 8.0.0.0
Property(S): SqlErrorReporting = #0
Property(S): SqlSqmReporting = #0
Property(S): SqlEnableRanu = 1
Property(S): SqlPatchLevel = 9.00.1399.06
Property(S): ChannelID = 271
Property(S): PIDTemplate = 77654<````=````=````=````=`````>@@@@@
Property(S): mpc = 77654
Property(S): OEMRelease = 0
Property(S): SQLSETUPBOOTSTRAPSETUPPATH = C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe
Property(S): SQLSETUPARPWRAPPER = C:Program FilesMicrosoft SQL Server90Setup BootstrapARPWrapper.exe
Property(S): UPGRADE_ADVISOR_CMD32 = C:Program FilesMicrosoft SQL Server90Setup Bootstrap
Property(S): SQLIEMINVERSION = C:WINDOWSsystem32shdocvw.dll
Property(S): ProgramFilesFolder = C:Program Files
Property(S): ProductID = **********
Property(S): DigitalProductID = **********
Property(S): INSTALLSQLDIR = D:Program FilesMicrosoft SQL Server
Property(S): INSTALLSQLDATADIR = D:Program FilesMicrosoft SQL Server
Property(S): SqlCollation = Latin1_General_CI_AS
Property(S): SqlInstanceName = MSSQLSERVER
Property(S): saSetAutoSAPWDAndDisable = 1
Property(S): ShowPID = 1
Property(S): MDACSXS = 1
Property(S): DefaultUIFont = Tahoma8
Property(S): VersionNT = 502
Property(S): LocalSystemAccount = NT AUTHORITYSYSTEM
Property(S): DefaultBuiltInAccount = LocalSystemAccount
Property(S): NetworkServiceAccount = NT AUTHORITYNETWORK SERVICE
Property(S): LocalServiceAccount = NT AUTHORITYLOCAL SERVICE
Property(S): INSTALLSQLSHAREDDIR = D:Program FilesMicrosoft SQL Server
Property(S): UI_INSTALLSQLSHAREDDIR = D:Program FilesMicrosoft SQL Server
Property(S): SimpleFeatureTitle_Feat1 = SQL Server Database Services
Property(S): SqlDisableNetworkProtocols = 2
Property(S): SimpleFeature_SQLEngineVS = Create a SQL Server failover cluster
Property(S): SimpleFeature_Feat1 = &SQL Server Database Services
Property(S): Service_AGT = SQL Server Agent
Property(S): Service_OLAP = SQL Server Analysis Services
Property(S): Service_SQL = SQL Server
Property(S): Service_RS = SQL Server Reporting Services
Property(S): Service_Browse = SQL Server Browser
Property(S): Service_DTS = SQL Server Integration Services
Property(S): Service_ADHelper = SQL Server Active Directory Helper
Property(S): Service_SQLWriter = SQL Server VSS Writer
Property(S): Service_FTS = SQL Server FullText Search
Property(S): ServiceDesc_RS = Manages, executes, renders, schedules and delivers reports.
Property(S): ServiceDesc_AGT = Executes jobs, monitors SQL Server, and fires alerts, and allows automation of some administrative tasks.
Property(S): ServiceDesc_SQL = Provides storage, processing and controlled access of data and rapid transaction processing.
Property(S): ServiceDesc_Browse = Provides SQL Server connection information to client computers.
Property(S): ServiceDesc_OLAP = Supplies online analytical processing (OLAP) and data mining functionality for business intelligence applications.
Property(S): ServiceDesc_DTS = Provides management support for SSIS package storage and execution.
Property(S): ServiceDesc_ADHelper = Enables integration with Active Directories.
Property(S): ServiceDesc_SQLWriter = Provides the interface to backup/restore Microsoft SQL server through the Windows VSS infrastructure.
Property(S): ServiceDesc_FTS = Quickly creates full-text indexes on content and properties of structured and semi-structured data to allow fast linguistic searches on this data.
Property(S): ServiceGroupDesc_ADHelper = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Active Directory Helper in SQL Server 2005.
Property(S): ServiceGroupDesc_AGT = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Agent in SQL Server 2005.
Property(S): ServiceGroupDesc_OLAP = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Analysis Services in SQL Server 2005.
Property(S): ServiceGroupDesc_Browse = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Browser in SQL Server 2005.
Property(S): ServiceGroupDesc_DTS = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Integration Services in SQL Server 2005.
Property(S): ServiceGroupDesc_FTS = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server and SQL Server FullText Search in SQL Server 2005.
Property(S): ServiceGroupDesc_NS = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Notification Services in SQL Server 2005.
Property(S): ServiceGroupDesc_RS = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Reporting Services in SQL Server 2005.
Property(S): ServiceGroupDesc_RSWeb = Members in the group have the required access to be assigned as the log on account for the associated instance of SQL Server Reporting Services in SQL Server 2005
Property(S): ServiceGroupDesc_SQL = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server and SQL Server FullText Search in SQL Server 2005.
Property(S): ServiceGroupDesc_SQL_NEW = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server in SQL Server 2005.
Property(S): ServiceGroupDesc_FTS_NEW = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Full Text Search in SQL Server 2005.
Property(S): DlgService_AGT = SQL Server Agent
Property(S): DlgService_OLAP = Analysis Services
Property(S): DlgService_SQL = SQL Server
Property(S): DlgService_RS = Reporting Services
Property(S): DlgService_Browse = SQL Browser
Property(S): AutoStart_AGT = SQL Server A&gent
Property(S): AutoStart_OLAP = &Analysis Services
Property(S): AutoStart_SQL = &SQL Server
Property(S): AutoStart_RS = Rep&orting Services
Property(S): AutoStart_Browse = SQL Bro&wser
Property(S): AutoStart_FTS = SQL Server &FullText Search
Property(S): _AuthenticationType = Windows
Property(S): SQL_rgCollation = 1
Property(S): OLAP_rgCollation = 0
Property(S): _InstanceType = Default
Property(S): _LicensingMode = PerSeat
Property(S): AGTLogin = DomainAccount
Property(S): ASLogin = DomainAccount
Property(S): SingleLogin = DomainAccount
Property(S): SQLLogin = DomainAccount
Property(S): RSLogin = DomainAccount
Property(S): SQLBROWSERLogin = DomainAccount
Property(S): _UpgradeLogon = Windows
Property(S): _SampleDBMode = InstallSD
Property(S): ButtonTextStyle = {ButtonTextStyle}
Property(S): DlgTextStyle = {DlgTextStyle}
Property(S): DlgTextStyleB = {DlgTextStyleB}
Property(S): DlgTitleStyle = {DlgTitleStyle}
Property(S): DlgTitleStyleB = {DlgTitleStyleB}
Property(S): FixedStyle = {FixedStyle}
Property(S): T_DataFree = T_DataFree
Property(S): T_DataReq = T_DataReq
Property(S): T_ProgramFree = T_ProgramFree
Property(S): T_ProgramReq = T_ProgramReq
Property(S): T_IPVal = T_IPVal
Property(S): T_Subnet = T_Subnet
Property(S): ErrorDialog = ErrorDlg
Property(S): TextVSName = &Virtual server name:
Property(S): ENABLERANU = 1
Property(S): AccountForAllNodesDlg_Desc = Account for remote setup.
Property(S): AccountForAllNodesDlg_Text = Enter a user name and password that is a valid administrator account for all nodes in the cluster system. This will be used during setup only.
Property(S): AccountForAllNodesDlg_Title = Remote Account Information
Property(S): Authentication_ConfirmPWText = Confirm &password:
Property(S): Authentication_DlgDesc = The authentication mode specifies the security used when connecting to SQL Server.
Property(S): Authentication_DlgText = Select the authentication mode to use for this installation.
Property(S): Authentication_DlgTitle = Authentication Mode
Property(S): Authentication_EnterPWText = &Enter password:
Property(S): Authentication_saPasswordText = Specify the sa logon password below:
Property(S): Authentication_SQL = &Mixed Mode (Windows Authentication and SQL Server Authentication)
Property(S): Authentication_Windows = &Windows Authentication Mode
Property(S): BrowseFolder_ComboText = &Install in:
Property(S): BrowseFolder_DlgDesc = You can select a different folder for installation.
Property(S): BrowseFolder_DlgTitle = Change Folders
Property(S): BrowseFolder_TailText = Installation &path:
Property(S): BrowseFolder_TailTextShared = The SQL Server shared path has already been configured.
Property(S): ButtonText_Abort = &Abort
Property(S): ButtonText_Add = &Add
Property(S): ButtonText_Back = < &Back
Property(S): ButtonText_Browse = B&rowse...
Property(S): ButtonText_Cancel = Cancel
Property(S): ButtonText_Close = &Close
Property(S): ButtonText_Complete = &Complete
Property(S): ButtonText_ContinueLater = &Continue Later
Property(S): ButtonText_DiskCost = &Disk Cost...
Property(S): ButtonText_Exit = &Exit
Property(S): ButtonText_Finish = &Finish
Property(S): ButtonText_Help = &Help
Property(S): ButtonText_Ignore = &Ignore
Property(S): ButtonText_Install = &Install
Property(S): ButtonText_Minimal = &Minimal
Property(S): ButtonText_New = &New
Property(S): ButtonText_Next = &Next >
Property(S): ButtonText_No = &No
Property(S): ButtonText_Normal = &Normal
Property(S): ButtonText_OK = OK
Property(S): ButtonText_Open = &Open
Property(S): ButtonText_Reinstall = &Reinstall
Property(S): ButtonText_ReinstallMode = &Select the reinstall mode
Property(S): ButtonText_Remove = &Remove
Property(S): ButtonText_Remove2 = &Remove
Property(S): ButtonText_Report = &Report
Property(S): ButtonText_Reset = &Reset
Property(S): ButtonText_Restore = &Restore
Property(S): ButtonText_Resume = &Resume
Property(S): ButtonText_Retry = &Retry
Property(S): ButtonText_Up = &Up
Property(S): ButtonText_Yes = &Yes
Property(S): Cancel_DlgDesc = Are you sure you want to cancel the installation?
Property(S): Cancel_DlgText = The installation is not complete. If you exit the wizard now, Microsoft SQL Server will not be installed.
Property(S): ClusterGroup_DlgDesc = Select the cluster group where the virtual server resources will be installed.
Property(S): ClusterGroup_DlgStaticTextAvailable = Available cluster groups:
Property(S): ClusterGroup_DlgStaticTextUnavailable = Unavailable cluster groups:
Property(S): ClusterGroup_DlgTitle = Cluster Group Selection
Property(S): ClusterNodeDlg_ButtonTextAdd = &Add ->
Property(S): ClusterNodeDlg_ButtonTextRemove = <- &Remove
Property(S): ClusterNodeDlg_StaticTextAvailableNode = Available nodes:
Property(S): ClusterNodeDlg_StaticTextRequiredNode = Required node:
Property(S): ClusterNodeDlg_StaticTextSelectedNode = Selected nodes:
Property(S): ClusterNodeDlg_StaticTextUnavailableNode = Unavailable nodes:
Property(S): ClusterNodeDlg_Text = Select the nodes to include in the virtual server.
Property(S): ClusterNodeDlg_Title = Cluster Node Configuration
Property(S): Collation_Service = S&ervice:
Property(S): Collation_Service1 = Collation settings for service:
Property(S): Collation_AS_Collation = Analysis Services Collation:
Property(S): Collation_ChkBinary = Binary
Property(S): Collation_ChkBinary2 = Binary - code point
Property(S): Collation_ChkCase = Case - sensitive
Property(S): Collation_ChkAccent = Accent - sensitive
Property(S): Collation_ChkKana = Kana - sensitive
Property(S): Collation_ChkWidth = Width - sensitive
Property(S): Collation_Designator = Collation &designator and sort order:
Property(S): Collation_DlgDesc = Collation settings define the sorting behavior for your server.
Property(S): Collation_DlgCusomizeText = &Customize for each service account
Property(S): Collation_DlgTitle = Collation Settings
Property(S): Collation_SQL = &SQL collations (used for compatibility with previous versions of SQL Server)
Property(S): DiskPrompt = Please insert next disk
Property(S): DiskSpace_DlgDesc = Disk space required for the installation exceeds available disk space.
Property(S): DiskSpace_DlgDesc1 = The available disk space and the space required for installation are shown below.
Property(S): DiskSpace_DlgText = The highlighted volumes, if any, do not have enough disk space available for the currently selected features. Click Disk Cleanup to free disk space and then click Resume to continue the installation, or click Exit to exit the wizard.
Property(S): DiskSpace_DlgTitle = Out of Disk Space
Property(S): DiskSpace_DlgTitle1 = Disk Cost
Property(S): DiskSpace_LBDiskCleanup = Use disk cleanup to free more disk space by removing unneeded files.
Property(S): REASON_ADMIN_DISABLED = Administrative shares must be enabled in order to let Setup access remote nodes
Property(S): REASON_DARWIN_VER = Windows installer is not present or has not the required version
Property(S): REASON_DUP_INSTANCE_NAME_CLST = An instance with the same name is already installed in one or more nodes of the cluster.
Property(S): REASON_GROUP_HOSTS_VS = Already contains a SQL Virtual Server
Property(S): REASON_GROUP_NO_DISK = Does not contain any valid cluster disk
Property(S): ERROR_INVALID_PID = This is an invalid Product Key value. Please check the number located on your Product Key sticker.
Property(S): ERROR_INVALID_USERNAME = The Name is required for the installation.
Property(S): REASON_NODE_DOWN = The node is down or unavailable
Property(S): REASON_NOT_KNOWN = Unknown
Property(S): REASON_PENDING_REBOOT = The node must be rebooted before running setup
Property(S): REASON_SCC_CHECK_FAILED = A SCC check failed on the node
Property(S): ERROR_UNKNOWN = Installation error. Install it by running setup.exe.
Property(S): REASON_VERSION_ADDNODE = Adding nodes to the Virtual Server definition using a newer version of Setup is not allowed.
Property(S): REASON_OS_VER = SQL Server requires Windows 2000 Service Pack 4, or Windows XP Service Pack 1 or later for installation.
Property(S): REASON_OS_TYPE = This version of SQL Server is not supported on this version of Windows.
Property(S): Exit_DlgDesc1 = Setup has installed Microsoft SQL Server successfully. Click Finish to exit.
Property(S): Exit_DlgDesc2 = Setup has removed Microsoft SQL Server successfully. Click Finish to exit.
Property(S): Exit_DlgDesc3 = Setup has updated Microsoft SQL Server successfully. Click Finish to exit.
Property(S): Exit_DlgDesc4 = Setup has reinstalled Microsoft SQL Server successfully. Click Finish to exit.
Property(S): Exit_DlgDesc5 = Setup has upgraded Microsoft SQL Server successfully. Click Finish to exit.
Property(S): Exit_DlgTitle = Completing Microsoft SQL Server Setup
Property(S): SimpleFeature_DlgDesc = Select the components to install or upgrade.
Property(S): SimpleFeature_DlgTitle = Components to Install
Property(S): SimpleFeature_Feat2 = &Analysis Services
Property(S): SimpleFeature_AnalysisServerVS = Create an Analysis Server failover cluster
Property(S): SimpleFeature_Feat3 = &Reporting Services
Property(S): SimpleFeature_Feat4 = N&otification Services
Property(S): SimpleFeature_Feat5 = &Integration Services
Property(S): SimpleFeature_Feat6 = &Workstation components, Books Online and development tools
Property(S): SimpleFeatureTitle_Feat2 = Analysis Services
Property(S): SimpleFeatureTitle_Feat3 = Reporting Services
Property(S): SimpleFeatureTitle_Feat4 = Notification Services
Property(S): SimpleFeatureTitle_Feat5 = Integration Services
Property(S): SimpleFeatureTitle_Feat6 = Client Components
Property(S): SimpleFeature_Advanced = A&dvanced
Property(S): SimpleFeature_AdvancedText = For more options, click Advanced.
Property(S): SimpleFeature_Components = Components to be installed
Property(S): SimpleFeature_OutOfSpace = There is not enough disk space to install the selected components. Click Advanced for more options.
Property(S): Feature_DlgDesc = Select the program features you want installed.
Property(S): Feature_DlgText = Click an icon in the following list to change how a feature is installed.
Property(S): Feature_DlgTitle = Feature Selection
Property(S): Feature_FeatureFrame = Feature description
Property(S): Feature_GroupBox1 = Installation path
Property(S): FileInUse_DlgDesc = Some files that need to be updated are currently in use.
Property(S): FileInUse_DlgText = The following applications are using files that need to be updated by this setup. Close these applications and click Retry to continue.
Property(S): FileInUse_DlgTitle = Files in Use
Property(S): InitDlg_Title = Microsoft SQL Server Installation
Property(S): InitDlg_Desc = Setup is preparing to continue with the installation.
Property(S): InitDlg_Text = Please wait while setup prepares to continue with the installation.
Property(S): Instance_Default = &Default instance
Property(S): Instance_DlgDesc = You can install a default instance or you can specify a named instance.
Property(S): Instance_DlgText = Provide a name for the instance. For a default installation, click Default instance and click Next. To upgrade an existing default instance, click Default instance. To upgrade an existing named instance select Named instance and specify the instance name.
Property(S): Instance_DlgText1 = To view a list of existing instances and components click on Installed instances.
Property(S): Instance_DlgTitle = Instance Name
Property(S): Instance_Named = N&amed instance
Property(S): IPAddress_DlgDesc = Enter virtual server information.
Property(S): IPAddress_DlgStaticTextClusterIP = Network address:
Property(S): IPAddress_DlgStaticTextIPAddress = &IP address:
Property(S): IPAddress_DlgStaticTextIPSel = &Selected networks and IP addresses:
Property(S): IPAddress_DlgStaticTextNetToUse = N&etwork to use:
Property(S): IPAddress_DlgStaticTextSubnet = Network subnet:
Property(S): IPAddress_DlgStaticTextVSName = Virtual server name:
Property(S): IPAddress_DlgText = Enter an IP address for the virtual server. To add IP addreses for additional networks, click Add.
Property(S): IPAddress_DlgTitle = Virtual Server Configuration
Property(S): License_Devices = devices
Property(S): License_Processors = processors
Property(S): LicenseModeDlg_DlgDesc = SQL server supports two client licensing modes: per seat licensing and processor licensing.
Property(S): LicenseModeDlg_DlgText = Choose the appropriate licensing modes.
Property(S): LicenseModeDlg_DlgText1 = Per seat license: each device that accesses Microsoft SQL Server requires a separate license.
Property(S): LicenseModeDlg_DlgText2 = Processor license: each processor on this server requires a separate license.
Property(S): LicenseModeDlg_DlgTitle = Licensing Mode
Property(S): LicenseModeDlg_Processor = &Processor license for
Property(S): LicenseModeDlg_RadioButtonGroup = Licensing mode
Property(S): LicenseModeDlg_Seat = Per &seat license for
Property(S): Maintenance_ChgLabel = Ch&ange Installed Components
Property(S): Maintenance_ChgLabelCl = &Maintain the Virtual Server
Property(S): Maintenance_ChgText = Maintain features of this instance.
Property(S): Maintenance_ChgTextCl = Add or remove nodes to the virtual server.
Property(S): Maintenance_DlgDesc = You can change or remove this instance of SQL Server.
Property(S): Maintenance_DlgTitle = Change or Remove Instance
Property(S): Maintenance_RmvLabel = R&emove Microsoft SQL Server
Property(S): Maintenance_RmvText = Remove all features of this existing installation from your computer.
Property(S): Maintenance_RmvTextCl = Remove the virtual server from your cluster.
Property(S): Maintenance_ChgLabelResume = Complete the &suspended installation
Property(S): Maintenance_ChgTextResume = Complete the suspended installation of Microsoft SQL Server on your computer.
Property(S): Progress_DlgDesc1 = The program features you selected are being installed.
Property(S): Progress_DlgDesc2 = The Microsoft SQL Server is being removed.
Property(S): Progress_DlgDesc3 = Setup is installing the components you selected.
Property(S): Progress_DlgDesc4 = The Microsoft SQL Server is being reinstalled.
Property(S): Progress_DlgText1 = Please wait while Setup installs Microsoft SQL Server. Installation may take several minutes.
Property(S): Progress_DlgText2 = Please wait while Setup removes Microsoft SQL Server. This may take several minutes.
Property(S): Progress_DlgText3 = Please wait while Setup updates Microsoft SQL Server. This may take several minutes.
Property(S): Progress_DlgText4 = Please wait while Setup reinstalls Microsoft SQL Server. Installation may take several minutes.
Property(S): Progress_DlgTitle1 = Installing Microsoft SQL Server
Property(S): Progress_DlgTitle2 = Removing Microsoft SQL Server
Property(S): Progress_DlgTitle3 = Configuring Microsoft SQL Server
Property(S): Progress_DlgTitle4 = Reinstalling Microsoft SQL Server
Property(S): Progress_lbStatus = Status:
Property(S): Register_CompLabel = C&ompany:
Property(S): Register_DlgSpec = The following information will personalize your installation.
Property(S): Register_DlgText = The Name field must be filled in prior to proceeding. The Company field is optional.
Property(S): Register_DlgText1 = Please enter your 25 character Product Key. You can find this number on the yellow sticker in the CD liner notes or the CD sleeve.
Property(S): Register_DlgTitle = Registration Information
Property(S): Register_NameLabel = N&ame:
Property(S): Resume_ResumeText = Setup will complete the suspended installation of Microsoft SQL Server on your computer. To continue, click Next.
Property(S): Resume_TextLine1 = Microsoft SQL Server Installation Wizard
Property(S): ServiceAccountDlg_Advanced = &Customize for each service account
Property(S): ServiceAccountDlg_Autostart = Start services at the end of setup
Property(S): ServiceAccountDlg_AutostartServices = Start services at the end of setup
Property(S): ServiceAccountDlg_DlgDesc = Service accounts define which accounts to log in.
Property(S): ServiceAccountDlg_DlgTitle = Service Account
Property(S): ServiceAccountDlg_Domain = Use a domain use&r account
Property(S): ServiceAccountDlg_DomainLabel = &Domain:
Property(S): ServiceAccountDlg_BuiltIn = Use the built-in S&ystem account
Property(S): ServiceAccountDlg_PasswordLabel = &Password:
Property(S): ServiceAccountDlg_Service = S&ervice:
Property(S): ServiceAccountDlg_Service1 = Service:
Property(S): ServiceAccountDlg_UsernameLabel = &Username:
Property(S): Setup = Setup
Property(S): StartCopy_DlgDesc = Setup is ready to begin installation.
Property(S): StartCopy_DlgDescReinst = Setup is ready to begin reinstallation.
Property(S): StartCopy_DlgDescRemove = You have chosen to remove the program from your system.
Property(S): StartCopy_DlgDescRemoveCl = You have chosen to remove the program from your cluster.
Property(S): StartCopy_DlgDescVSConfig = Setup is ready to begin updating your virtual server.
Property(S): StartCopy_DlgText = Setup has enough information to start copying the program files. To proceed, click Install. To change any of your installation settings, click Back. To exit setup, click Cancel.
Property(S): StartCopy_DlgText2 = Click Cancel to exit setup.
Property(S): StartCopy_DlgTextConfig = Setup has enough information to start installation. Click Install to proceed.
Property(S): StartCopy_DlgTextReinstData = You have chosen to re-install all features of existing installation including data files, and therefore overwrite the system database. Click Reinstall to proceed.
Property(S): StartCopy_DlgTextReinst = You have chosen to re-install all features of existing installation. Click Reinstall to proceed.
Property(S): StartCopy_DlgTextRemove = Click Remove to remove Microsoft SQL Server from your computer. After removal, this program will no longer be available for use.
Property(S): StartCopy_DlgTextRemoveCl = Click Remove to remove Microsoft SQL Server from your cluster. After removal, this program will no longer be available for use.
Property(S): StartCopy_DlgTextUnchanged = You did not change your virtual server configuration.
Property(S): StartCopy_DlgTitle = Ready to Install
Property(S): StartCopy_DlgTitleConfig = Ready to Update
Property(S): StartCopy_DlgTitleReinst = Ready to Reinstall
Property(S): StartCopy_DlgTitleRemove = Remove Microsoft SQL Server
Property(S): StaticUserName = Account:
Property(S): StaticUserPassword = &Password:
Property(S): TextDataDir = &Data files:
Property(S): TextProgramFileDir = Program files:
Property(S): UpgradeLogon_DlgDesc = Database account for upgrading.
Property(S): UpgradeLogon_DlgText = The authentication mode specifies the security used when connecting to SQL Server during database upgrading.
Property(S): UpgradeLogon_DlgTitle = Upgrade Logon Information
Property(S): UpgradeLogon_Password = &Password:
Property(S): UpgradeLogon_SQL = &SQL Server Authentication Mode
Property(S): UpgradeLogon_SQLText = Enter SQL Server account:
Property(S): UpgradeLogon_UserName = &Username:
Property(S): UpgradeLogon_Windows = &Windows Authentication Mode
Property(S): UserExit_FinishText1 = To complete installation at another time, please run setup again.
Property(S): UserExit_FinishText2 = Click Finish to exit setup.
Property(S): UserExit_RestContText1 = You can either keep any existing installed elements on your system to continue this installation at a later time or you can restore your system to its original state prior to the installation.
Property(S): UserExit_RestContText2 = Click Restore or Continue Later to exit the installation wizard.
Property(S): UserExit_TextLine = Setup was interrupted before Microsoft SQL Server could be completely installed.
Property(S): VirtualServer_DlgDesc = The virtual server name must be unique on the network.
Property(S): VirtualServer_DlgText = Enter the name of the new virtual server.
Property(S): VirtualServer_DlgTitle = Virtual Server Name
Property(S): WARNING_QUORUMGROUP1 = You have chosen the group containing the quorum resource. It is strongly recommended that you should not use the quorum group with SQL Server.
Property(S): WARNING_QUORUMGROUP2 = Are you sure you want to proceed?
Property(S): DWTITLENAME = Microsoft SQL Server Setup
Property(S): DWHEADERTEXT = Microsoft SQL Server Setup was unable to install on your computer.
Property(S): DWERRORTEXT = Microsoft SQL Server Setup has encountered a problem and will end.
Property(S): ErrorDlg_Title = Microsoft SQL Server Setup
Property(S): Wait_Title = Please wait...
Property(S): Wait_Database = Validating settings.
Property(S): Wait_Service = Starting Service: [1]
Property(S): Wait_Connect = Validating database access on SQL Server [1].
Property(S): ErrorReporting_DlgDesc = Help Microsoft improve some of the SQL Server 2005 components and services.
Property(S): ErrorReporting_DlgText1 = For more information on the error reporting feature and the type of information sent, click Help.
Property(S): ErrorReporting_DlgText1_Property = ErrorReporting_DlgText1
Property(S): ErrorReporting_DlgText1_Express = By installing Microsoft SQL Server 2005, SQL Server and its components will be configured to automatically send fatal service error reports to Microsoft or a Corporate Error Reporting Server. Microsoft uses error reports to improve SQL Server functionality, and treats all information as confidential.
Property(S): ErrorReporting_DlgTitle = Error and Usage Report Settings
Property(S): ErrorReporting_CheckBox = &Automatically send Error reports for SQL Server 2005 to Microsoft or your corporate error reporting server. Error reports include information regarding the condition of SQL Server 2005 when an error occurred, your hardware configuration and other data. Error reports may unintentionally include personal information, which will not be used by Microsoft.
Property(S): ErrorReporting_SQM_CheckBox = Automatically send &Feature Usage data for SQL Server 2005 to Microsoft. Usage data includes anonymous information about your hardware configuration and how you use our software and services.
Property(S): EnableRanu_DlgDesc = Configure Run As Normal User mode.
Property(S): EnableRanu_DlgText1 = Allow users who do not have administrator privileges to run a separate instance of the Database Engine.
Property(S): EnableRanu_DlgText1_Property = EnableRanu_DlgText1
Property(S): EnableRanu_DlgTitle = User Instances
Property(S): EnableRanu_CheckBox = &Enable User Instances
Property(S): BrowseFolder_VolumeList = Program files must be installed on a valid local disk available on all cluster nodes. The volumes values are:
Property(S): ProductClash_DlgTitle = Existing components
Property(S): ProductClash_DlgDesc = Components have been found on the machine. Select upgrade options below.
Property(S): ProductClash_DlgText = The following components that you chose to install are already installed on the machine. To view a report of available options and alternatives click on Details.
Property(S): ProductClash_Detail = &Details...
Property(S): ProductClash_Warning = Components shared between SQL Server instances will be removed if they belong only to the SQL Server instance being upgraded.
Property(S): ProductClash_LegacyTools = Management Tools
Property(S): ProductClash_LegacyDTS = Data Transformation Services
Property(S): DetailDlg_DlgTitle = Installation options
Property(S): DetailDlg_DlgDesc = The list below shows installed components and upgrade options.
Property(S): InstanceListDlg_DlgTitle = Installed instances
Property(S): InstanceListDlg_DlgDesc = The list below contains all existing instances and components installed on this machine.
Property(S): InstanceListDlg_InstanceListText = To view details for an installed instance, select an instance from the list below. To proceed, select the instance name to upgrade and click OK.
Property(S): InstanceListDlg_TypeText = Type:
Property(S): InstanceListDlg_VersionText = Version:
Property(S): InstanceListDlg_EditionText = Edition:
Property(S): InstanceListDlg_LanguageText = Language:
Property(S): InstanceListDlg_DetailGroup = Installed Instance Details
Property(S): Instance_Instances = &Installed instances
Property(S): Product_YukonServer = Yukon Server
Property(S): Product_SQLServer = SQL Server
Property(S): Product_AnalysisServices = Analysis Services
Property(S): Product_ReportServer = Reporting Services
Property(S): ProductClash_Maintain = (Cannot maintain product, to maintain the product go to Add or Remove Programs)
Property(S): ProductClash_Upgrade = (Cannot upgrade product, to maintain the product go to Add or Remove Programs)
Property(S): ProductClash_UpgradeAsVS = (Upgrade product to Virtual Server)
Property(S): ProductClash_Virtualize = (Cannot virtualize product)
Property(S): Detail_Name = Name:
Property(S): Detail_AllowedAction = Allowed Action:
Property(S): Detail_Reason = Reason:
Property(S): Detail_Warning = Warning:
Property(S): Detail_ActionMaintain = Maintain (Action is only available from Add or Remove Programs)
Property(S): Detail_ReasonMaintain = Cannot maintain product, to maintain the product go to Add or Remove Programs
Property(S): Detail_ActionUpgrade = Upgrade
Property(S): Detail_ReasonUpgrade = Product can be upgraded to a new version
Property(S): Detail_ActionNone = None
Property(S): Detail_ReasonNoVirtualize = Product cannot be virtualized
Property(S): Detail_ReasonNone = Upgrades are not supported yet
Property(S): Detail_ReasonBlock = Your upgrade is blocked. For more information about upgrade support, see the "Version and Edition Upgrades" and "Hardware and Software Requirements" topics in SQL Server 2005 Setup Help or SQL Server 2005 Books Online.
Property(S): Detail_ReasonRemoveDTS = The SQL Server instance you are upgrading includes Data Transformation Services. Following the upgrade, Data Transformation Services will be removed unless there are other SQL Server instances installed that share it. Click on help for more information.
Property(S): Detail_ReasonRemoveTools = The SQL Server instance you are upgrading includes SQL Server Management Tools. Following the upgrade, previous versions of SQL Server Management Tools will be removed unless there are other SQL Server instances installed that share them. Do not use previous versions of SQL Server Management Tools with SQL Server 2005. Instead, use SQL Server 2005 Management Tools included in the SQL Server 2005 Workstation Components feature.
Property(S): SampleDatabase_DlgDesc = Configure how the sample databases are installed.
Property(S): SampleDatabase_DlgText = Specify a method to install the sample databases to an existing instance of SQL Server. To attach the sample databases, you must have permissions to create databases on the specified instance.
Property(S): SampleDatabase_DlgTitle = Sample Databases Setup
Property(S): SampleDatabase_ServerText = &SQL Server instance:
Property(S): SampleDatabase_Install = &Install sample databases without attaching
Property(S): SampleDatabase_Attach = Install and &attach sample databases
Property(S): Report_ActionUpgrade = Upgrade
Property(S): Report_ActionVirtualize = Virtualize
Property(S): Report_InstallTitle = The following components will be installed:
Property(S): Report_BlockTitle = The following components that you selected will not be changed:
Property(S): Report_WarnSPTitle = Warning: Setup found that the following components that already exist are at a different service pack level than the components being installed.
Property(S): Report_WarnSPCompList = Components:
Property(S): Report_WarnSPTail = After completing setup, you must download and apply the latest SQL Server 2005 service pack to all the components.
Property(S): UpgradeTools = Upgrading tools [1]
Property(S): UpgradeRepl = Upgrading replication [1]
Property(S): UpgradeEngine = Upgrading SQL Engine [1]
Property(S): UpgradeDTS = Upgrading DTS [1]
Property(S): HideAdvancedOptionsText = Hi&de advanced configuration options
Property(S): ArpProductDispayName = Microsoft SQL Server 2005
Property(S): Built_inLocalSystem = Local system
Property(S): Built_inNetworkService = Network service
Property(S): Built_inLocalService = Local service
Property(S): Wait_UpgradeBlocker_Title = Analyzing Upgrade
Property(S): Wait_UpgradeBlocker_Status = Validating Upgrade Options.
Property(S): UpgradeBlockerDlg_DlgDesc = The following issues currently block upgrading to SQL Server 2005
Property(S): UpgradeBlockerDlg_DlgTitle = Upgrade Blocked
Property(S): UpgradeBlockerDlg_UAWarning = For assistance in resolving these issues, run Upgrade Advisor. You can install Upgrade Advisor from the SQL Server 2005 Setup Splash Screen.
Property(S): DomainGroup_DlgTitle = Domain Groups for Clustered Services
Property(S): DomainGroup_DlgText = The startup account for each clustered service will be added to the DomainNameGroupName to set its access control. Enter the name of existing DomainNameGroupName for each clustered service being installed. For additional information, click Help.
Property(S): DomainGroup_Browse = ...
Property(S): DomainGroupDlg_Service = Service Name
Property(S): DomainGroupDlg_Group = DomainNameGroupName
Property(S): SqlDomainGroup_SQL = &SQL Server
Property(S): SqlDomainGroup_AGT = S&QL Server Agent
Property(S): SqlDomainGroup_FTS = &Full-Text Search
Property(S): SqlDomainGroup_AS = &Analysis Services
Property(S): SqlDomainGroupService_SQL = SQL Server
Property(S): SqlDomainGroupService_AGT = SQL Server Agent
Property(S): SqlDomainGroupService_FTS = Full-Text Search
Property(S): SqlDomainGroupService_AS = Analysis Services
Property(S): SqlSortId030 = Binary order, for use with the 437 (U.S. English) Character Set.
Property(S): SqlSortId031 = Dictionary order, case-sensitive, for use with the 437 (U.S. English) Character Set.
Property(S): SqlSortId032 = Dictionary order, case-insensitive, for use with the 437 (U.S. English) Character Set.
Property(S): SqlSortId033 = Dictionary order, case-insensitive, uppercase preference, for use with the 437 (U.S. English) Character Set.
Property(S): SqlSortId034 = Dictionary order, case-insensitive, accent-insensitive, for use with the 437 (U.S. English) Character Set.
Property(S): SqlSortId035 = Binary order based on code point comparison, for use with the 437 (U.S. English) Character Set.
Property(S): SqlSortId040 = Binary order, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId041 = Dictionary order, case-sensitive, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId042 = Dictionary order, case-insensitive, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId043 = Dictionary order, case-insensitive, uppercase preference, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId044 = Dictionary order, case-insensitive, accent-insensitive, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId045 = Binary order based on code point comparison, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId049 = Strict compatibility with version 1.x case-insensitive databases, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId051 = Dictionary order, case-sensitive, for use with 1252 Character Set.
Property(S): SqlSortId052 = Dictionary order, case-insensitive, for use with 1252 Character Set.
Property(S): SqlSortId053 = Dictionary order, case-insensitive, uppercase preference, for use with 1252 Character Set.
Property(S): SqlSortId054 = Dictionary order, case-insensitive, accent-insensitive, for use with 1252 Character Set.
Property(S): SqlSortId055 = Alternate dictionary order, case-sensitive, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId056 = Alternate dictionary order, case-insensitive, uppercase preference, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId057 = Alternate dictionary order, case-insensitive, accent-insensitive, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId058 = Scandinavian dictionary order, case-insensitive, uppercase preference, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId059 = Scandinavian dictionary order, case-sensitive, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId060 = Scandinavian dictionary order, case-insensitive, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId061 = Alternate dictionary order, case-insensitive, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId081 = Dictionary order, case-sensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId082 = Dictionary order, case-insensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId083 = Czech dictionary order, case-sensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId084 = Czech dictionary order, case-insensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId085 = Hungarian dictionary order, case-sensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId086 = Hungarian dictionary order, case-insensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId087 = Polish dictionary order, case-sensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId088 = Polish dictionary order, case-insensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId089 = Romanian dictionary order, case-sensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId090 = Romanian dictionary order, case-insensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId091 = Croatian dictionary order, case-sensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId092 = Croatian dictionary order, case-insensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId093 = Slovak dictionary order, case-sensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId094 = Slovak dictionary order, case-insensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId095 = Slovenian dictionary order, case-sensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId096 = Slovenian dictionary order, case-insensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId105 = Dictionary order, case-sensitive, for use with the 1251 (Cyrillic) Character Set.
Property(S): SqlSortId106 = Dictionary order, case-insensitive, for use with the 1251 (Cyrillic) Character Set.
Property(S): SqlSortId107 = Ukrainian dictionary order, case-sensitive, for use with the 1251 (Cyrillic) Character Set.
Property(S): SqlSortId108 = Ukrainian dictionary order, case-insensitive, for use with the 1251 (Cyrillic) Character Set.
Property(S): SqlSortId113 = Dictionary order, case-sensitive, for use with the 1253 (Greek) Character Set.
Property(S): SqlSortId114 = Dictionary order, case-insensitive, for use with the 1253 (Greek) Character Set.
Property(S): SqlSortId120 = Mixed dictionary order, for use with the 1253 (Greek) Character Set.
Property(S): SqlSortId121 = Dictionary order, case-sensitive, accent-sensitive, for use with the 1253 (Greek) Character Set.
Property(S): SqlSortId122 = Dictionary order, case-sensitive, accent-sensitive, for use with the 1253 (Greek) Character Set.
Property(S): SqlSortId124 = Dictionary order, case-insensitive, accent-insensitive, for use with the 1253 (Greek) Character Set.
Property(S): SqlSortId129 = Dictionary order, case-sensitive, for use with the 1254 (Turkish) Character Set.
Property(S): SqlSortId130 = Dictionary order, case-insensitive, for use with the 1254 (Turkish) Character Set.
Property(S): SqlSortId137 = Dictionary order, case-sensitive, for use with the 1255 (Hebrew) Character Set.
Property(S): SqlSortId138 = Dictionary order, case-insensitive, for use with the 1255 (Hebrew) Character Set.
Property(S): SqlSortId145 = Dictionary order, case-sensitive, for use with the 1256 (Arabic) Character Set.
Property(S): SqlSortId146 = Dictionary order, case-insensitive, for use with the 1256 (Arabic) Character Set.
Property(S): SqlSortId153 = Dictionary order, case-sensitive, for use with the 1257 (Baltic) Character Set.
Property(S): SqlSortId154 = Dictionary order, case-insensitive, for use with the 1257 (Baltic) Character Set.
Property(S): SqlSortId155 = Estonian dictionary order, case-sensitive, for use with the 1257 (Baltic) Character Set.
Property(S): SqlSortId156 = Estonian dictionary order, case-insensitive, for use with the 1257 (Baltic) Character Set.
Property(S): SqlSortId157 = Latvian dictionary order, case-sensitive, for use with the 1257 (Baltic) Character Set.
Property(S): SqlSortId158 = Latvian dictionary order, case-insensitive, for use with the 1257 (Baltic) Character Set.
Property(S): SqlSortId159 = Lithuanian dictionary order, case-sensitive, for use with the 1257 (Baltic) Character Set.
Property(S): SqlSortId160 = Lithuanian dictionary order, case-insensitive, for use with the 1257 (Baltic) Character Set.
Property(S): SqlSortId183 = Danish/Norwegian dictionary order, case-insensitive, uppercase preference, for use with 1252 Character Set.
Property(S): SqlSortId184 = Swedish/Finnish (Phone) dictionary order, case-insensitive, uppercase preference, for use with 1252 Character Set.
Property(S): SqlSortId185 = Swedish/Finnish (Standard) dictionary order, case-insensitive, uppercase preference, for use with 1252 Character Set.
Property(S): SqlSortId186 = Icelandic dictionary order, case-insensitive, uppercase preference, for use with 1252 Character Set.
Property(S): StdSku = 1
Property(S): UpgradeCode = {929C9FEC-8873-4A1A-A209-9AF432E8E1D1}
Property(S): SqlPackageId = 1
Property(S): ProductName = Microsoft SQL Server 2005
Property(S): ProductNameSetup = Microsoft SQL Server 2005 Setup
Property(S): RemoveFeatureList = SQL_Engine,SQL_Data_Files,SQL_Replication,SQL_FullText,SQL_SharedTools,SQL_BC_DEP
Property(S): ROOTDRIVE = D:
Property(S): ValidMOFInstanceName = 1
Property(S): PIDRET = 0
Property(S): DPID = **********
Property(S): PID = **********
Property(S): PIDSEQ = 271000003
Property(S): PKU = 0
Property(S): CCPTrigger = 2
Property(S): SqlPerfMonRegKey = SQLCTR
Property(S): SqlSubDir = MSSQL
Property(S): InstanceSubDir = MSSQL.1
Property(S): Namechecksum.7354AFCB_913B_4E9F_B76C_2376101FDE0C = Standard Edition
Property(S): Namechecksum.CC1A8C58_27D1_4D38_BF1B_C0A5CBB90616 = Standard Edition
Property(S): QuotedServiceGroupAgent.EAD22282_F1AF_4119_B1F9_C9F1DCBC62FF = IECDC-WIAS169SQLServer2005SQLAgentUser$IECDC-WIAS169$MSSQLSERVER
Property(S): QuotedServiceGroupADHelper.2C8E638F_C982_4AA5_A173_7148A8E8649D = IECDC-WIAS169SQLServer2005MSSQLServerADHelperUser$IECDC-WIAS169
Property(S): QuotedServiceGroupSQLBrowser.879C8BDB_884A_4C3C_80C3_3452EA2B8439 = IECDC-WIAS169SQLServer2005SQLBrowserUser$IECDC-WIAS169
Property(S): QuotedServiceGroupSQLBrowser.03BE59F9_3DFA_413B_A99C_B95CA31A7BFE = IECDC-WIAS169SQLServer2005SQLBrowserUser$IECDC-WIAS169
Property(S): QuotedServiceGroupSQLBrowser.2FC2D269_8625_4826_BB3F_F9059090CB38 = IECDC-WIAS169SQLServer2005SQLBrowserUser$IECDC-WIAS169
Property(S): InstId = MSSQL.1
Property(S): PreviousInstId = MSSQL.1
Property(S): SqlLegacyRegPath = MSSQLServer
Property(S): SqlOriginalMachineName = IECDC-WIAS169
Property(S): RSSqlPoolLimit = 150
Property(S): RSGUIDVALUE = {97ba1f98-43fe-42dd-8a0d-ff40868ebe16}
Property(S): ProgramFilesFolder.D20239D7_E87C_40C9_9837_E70B8D4882C2 = C:Program Files
Property(S): ModuleID_SQLBASE = D20239D7_E87C_40C9_9837_E70B8D4882C2
Property(S): SQLAUTOSTART = 1
Property(S): InstanceName.D20239D7_E87C_40C9_9837_E70B8D4882C2 = MSSQLSERVER
Property(S): RSPREREQUISITECHECKED = 1
Property(S): SqlCOMPlusInstalled = 1
Property(S): SqlASPNETInstalled = 1
Property(S): ProgramMenuFolder.ConfigurationTools1033 = C:Documents and SettingsAll UsersStart MenuPrograms
Property(S): SqlDefaultWebSite = /W3SVC/1
Property(S): SqlIISInstalled = 1
Property(S): IISCHECKED = 1
Property(S): SCMLocalServiceAccount = NT AUTHORITYLocalService
Property(S): SCMNetworkServiceAccount = NT AUTHORITYNetworkService
Property(S): PerformanceLogUsersGroup = BUILTINPerformance Log Users
Property(S): PerformanceMontiorUsersGroup = BUILTINPerformance Monitor Users
Property(S): DW20PATH_CPUTYPEX86 = X86
Property(S): QuotedComputerName = IECDC-WIAS169
Property(S): QuotedDefaultDomain = VF-IE
Property(S): DW20PATH_X86.8D56D6B0_25DE_4471_A64F_717FC5AB6330 = C:PROGRA~1COMMON~1MICROS~1DWDW20.EXE
Property(S): DefaultDomain = VF-IE
Property(S): WindowsFolder.97F81AF1_0E47_DC99_FF1F_C8B3B9A1E18E = C:WINDOWS
Property(S): SystemFolder.97F81AF1_0E47_DC99_FF1F_C8B3B9A1E18E = C:WINDOWSsystem32
Property(S): WindowsFolder.98CB24AD_52FB_DB5F_FF1F_C8B3B9A1E18E = C:WINDOWS
Property(S): SystemFolder.98CB24AD_52FB_DB5F_FF1F_C8B3B9A1E18E = C:WINDOWSsystem32
Property(S): WindowsFolder.9BAE13A2_E7AF_D6C3_FF1F_C8B3B9A1E18E = C:WINDOWS
Property(S): SystemFolder.9BAE13A2_E7AF_D6C3_FF1F_C8B3B9A1E18E = C:WINDOWSsystem32
Property(S): WindowsFolder.74FD3CE6_2A8D_0E9C_FF1F_C8B3B9A1E18E = C:WINDOWS
Property(S): SystemFolder.74FD3CE6_2A8D_0E9C_FF1F_C8B3B9A1E18E = C:WINDOWSsystem32
Property(S): WindowsFolder.66332652_9C28_58B1_FF1F_C8B3B9A1E18E = C:WINDOWS
Property(S): SystemFolder.66332652_9C28_58B1_FF1F_C8B3B9A1E18E = C:WINDOWSsystem32
Property(S): WindowsFolder.63E949F6_03BC_5C40_FF1F_C8B3B9A1E18E = C:WINDOWS
Property(S): SystemFolder.63E949F6_03BC_5C40_FF1F_C8B3B9A1E18E = C:WINDOWSsystem32
Property(S): WindowsFolder.68B7C6D9_1DF2_54C1_FF1F_C8B3B9A1E18E = C:WINDOWS
Property(S): SystemFolder.68B7C6D9_1DF2_54C1_FF1F_C8B3B9A1E18E = C:WINDOWSsystem32
Property(S): WindowsFolder.D2730D3F_3C41_5884_FF1F_C8B3B9A1E18E = C:WINDOWS
Property(S): SystemFolder.D2730D3F_3C41_5884_FF1F_C8B3B9A1E18E = C:WINDOWSsystem32
Property(S): ACTION = INSTALL
Property(S): Preselected = 1
Property(S): UILevel = 2
Property(S): ServicePrefixRS.6080319C_1466_426E_9E7A_1DD555143E0A = SQLServer2005ReportServerUser$IECDC-WIAS169$
Property(S): ServicePrefixSSIS.6080319C_1466_426E_9E7A_1DD555143E0A = SQLServer2005DTSUser$IECDC-WIAS169
Property(S): OriginalDatabase = D:MSMSQLServer2005ServersSetupSqlRun_SQL.msi
Property(S): DATABASE = C:WINDOWSInstallerd5f48.msi
Property(S): Privileged = 1
Property(S): RedirectedDllSupport = 2
Property(S): MsiWin32AssemblySupport = 5.2.3790.1830
Property(S): MsiNetAssemblySupport = 2.0.50727.42
Property(S): Date = 22/02/2007
Property(S): Time = 15:34:23
Property(S): TTCSupport = 1
Property(S): ColorBits = 32
Property(S): TextHeight = 16
Property(S): BorderSide = 1
Property(S): BorderTop = 1
Property(S): CaptionHeight = 19
Property(S): ScreenY = 768
Property(S): ScreenX = 1024
Property(S): SystemLanguageID = 6153
Property(S): ComputerName = IECDC-WIAS169
Property(S): UserLanguageID = 6153
Property(S): UserSID = S-1-5-21-1275210071-484763869-725345543-115600
Property(S): LogonUser = manncol_srvadm
Property(S): AdminUser = 1
Property(S): VirtualMemory = 7379
Property(S): PhysicalMemory = 3928
Property(S): SystemFolder.60A85CA1_D9D8_43FA_9DD5_574BEF970F9F = C:WINDOWSsystem32
Property(S): Intel = 15
Property(S): ShellAdvtSupport = 1
Property(S): OLEAdvtSupport = 1
Property(S): GPTSupport = 1
Property(S): FontsFolder = C:WINDOWSFonts
Property(S): ModuleID_SQLBRWS = 2FC2D269_8625_4826_B
And thanks to Ray for another frustrating response. Gentle suggestion, if you are going to hang out here you may find people appreciate a tad more detail than 'script it'. I consistently get a chuckle out of your responses.
View 5 Replies View RelatedI have job in SQL Server 2000 that is setup to notify an email operator upon successful completion.
When I test the notification to the set email operator it sends the email just fine.
When the job is run manually it emails the operator just fine.
When the job is run on a schedule it does not email the operator upon completion. It gives the details in view job history "NOTE: Failed to notify '<operator>' via email.
I have other jobs on the same server that run and notify via email to other operators upon successful completion just fine.
I have parsed MS Technet and the web and did not find anything.
Any help is greatly appreciated.
This isn't a performance type of question, or whose CPU is bigger, but I'm more interested in knowing what people use out there as far as monitor setups go.
The root of the question stems from working in large package where there are many components laid out on the work flow. What do you use to work with large layouts? I constantly find it troubling to view enough of my package and am always zooming out to see more of the package. However, when doing that, the text becomes unreadable, of course.
I currently use a dual-monitor setup using my laptop and a LCD flat screen.
Resolutions on the laptop is 1920 x 1200 and the LCD monitor is 1280 x 1024. This helps to keep windows and output screens on one monitor while keeping the work flow on the other. Even still, I wish I had more screen real estate.
So, what say you?
Hi,
I am trying to install SQL server 2005 developer edition on Win XP SP2.
I am getting error during Database Services install throwing a log (part of it)
Property(S): FTERegRudeInstName.68C6D15C_77E0_11D5_8528_00C04F68155C = MSSQL.1
Property(S): FTEUPGRADE.68C6D15C_77E0_11D5_8528_00C04F68155C = 0
Property(S): FTEUpgrade30.68C6D15C_77E0_11D5_8528_00C04F68155C = 0
Property(S): FTEUpgradeMSSearchApp.68C6D15C_77E0_11D5_8528_00C04F68155C = SQLServer
Property(S): FTEUpgradeMSSearchStandalone.68C6D15C_77E0_11D5_8528_00C04F68155C = 0
Property(S): CostingComplete = 1
Property(S): FTEInstID.68C6D15C_77E0_11D5_8528_00C04F68155C = 1
Property(S): FTEAppID.68C6D15C_77E0_11D5_8528_00C04F68155C = {68C6D318-77E0-11D5-8528-00C04F68155C}
Property(S): FTEAdminCLSID.68C6D15C_77E0_11D5_8528_00C04F68155C = {68C6D37C-77E0-11D5-8528-00C04F68155C}
Property(S): FTEIFTEAdmin.68C6D15C_77E0_11D5_8528_00C04F68155C = {64f6bd6f-cc0d-11d6-9a15-505054503030}
Property(S): FTEMSFTEPXY.68C6D15C_77E0_11D5_8528_00C04F68155C = {64f6bdd4-cc0d-11d6-9a15-505054503030}
Property(S): FTEServiceName.68C6D15C_77E0_11D5_8528_00C04F68155C = msftesql
Property(S): OutOfDiskSpace = 0
Property(S): OutOfNoRbDiskSpace = 0
Property(S): PrimaryVolumeSpaceAvailable = 0
Property(S): PrimaryVolumeSpaceRequired = 0
Property(S): PrimaryVolumeSpaceRemaining = 0
Property(S): RSVirtualDirectoryManager = Reports
Property(S): RSVirtualDirectoryServer = ReportServer
Property(S): SqlActionManaged = 3
Property(S): SqlStateManaged = 2
Property(S): SOURCEDIR = D:Setup
Property(S): SourcedirProduct = {2373A92B-1C1C-4E71-B494-5CA97F96AA19}
Property(S): InstallNgenTicks = 20000
Property(S): SQLBROWSERSCMACCOUNT = CORPNBDQT5O
Property(S): AGTSCMACCOUNT = CORPNBDQT5O
Property(S): SQLSCMACCOUNT = CORPNBDQT5O
Property(S): DebugClsid.CC1A8C58_27D1_4D38_BF1B_C0A5CBB90616 = {7E6E77F5-0576-4DAF-A405-B9184C5DD85A}
Property(S): ProductToBeRegistered = 1
MSI (s) (AC:94) [11:53:33:621]: Note: 1: 1708
MSI (s) (AC:94) [11:53:33:621]: Product: Microsoft SQL Server 2005 -- Installation failed.
Could somebody help, please?
Amol
904-987-7972
hi, I am working on SQL server 6.5 using a desk top. Now I am about to buy a note book and do some development work. As far as I know, win 95,98 does not support SQL server 6.5
But SQL sever 7.0 does support win 95,98 Am I correct?
I am confuzed, what notebook operating system shall I buy which will allow me to work on sql development on the road.
another issues is what if I choose to use win 98 for sql server 7.0 what are the things that I will be missing . In other word, what are the limitation that I may have when acquiring win 98 as an operating system for sql server 7.0..
thanks for your advice
regards
Ali
I have created a publisher with row filtering using merge replication .I configured 5-6 subscribers for it.It was working fine for 2 months.But now for two subscribers its showing an error Process could not deliver update (s) at the publisher
Ive checked the job history..its showing
Merge process encountered an unexpected network error. The connection to tublisher 'Publishername' is no longer available
can any one help me?
thanks and regards
Dhanya
any tricks to separate this column from:
"testlname,testfname comment section > comment section testlname,testfname 6/30/2015 9:05:58 AM > testlname,testfname 6/30/2015 9:06:18 AM > comment section testlname,testfname 6/30/2015 9:10:05 AM > comment section"
to:
col1 Col2 col3
testlname,testfname 6/30/2015 9:05:58 AM comment section
testlname,testfname 6/30/2015 9:06:18 AM comment section
testlname,testfname 6/30/2015 9:10:05 AM comment section
Situation: In this stored procedure, I have to calculate in some manner: Font, FontSize, BoldText, ShowBox and number of characters to see how many lines it will take on a Crystal Report. Wondering if you have seen some like this on Web or have an ideas? Measurements(length, width) and character count seem appropriate. How about a function?
Uses Arial and fontsize can be 8pt - 28pt.
Thanks. TAEG
The 6:th of march Sql server data tools for Visual Studio 2012 was released.
[URL]
I seem to be unable to install this using the link provided on the blog page. I'm getting a "Same architecture installation" error. Running on the machine is Visual Studio 2012 Premium & Sql Server 2012 (64bit).
why I'm getting this installation error.
I am trying to install SQL Server 2000 on a Win2K OS machine but Iget this error message:"A previous program installation created pending file operations onthe installation machine. You must restart the computer before runningsetup."I see others have had this problem but have fixed it using the solutionin:http://support.microsoft.com/defaul...kb;en-us;312995I have tried the solution but to no avail. The registry key:HKEY_LOCAL_MACHINESYSTEMCurrentControlSetContro lSessionManagerPendingFileRenameOperations keeps reappearing as soon as Iclose RegEdit.Any ideas?Thanks,lq
View 3 Replies View RelatedPlease help,I am trying to install MSDE 2000 so that Backup exec will run on thisserver. I have gotten so far as to find an entry in my SQLSTP.TXT filethat says that c:mssql7 was detected so the install fails.Now, to start with there is no directory called C:mssql7 on thisserver. I have gone through all MS articles on manual removal of SQLserver and instances. I have searched the registry for mssql7 andremoved any keys that matched, as per MS article I have searched onSQLBOOT.dll and it is not present anywhere on my system and I still getthe same results.2:07:44 Begin Action: Detection12:07:44 SQL Server version already installed: 7.00.62312:07:44 Previous Install SQL Path: C:MSSQL712:07:44 Previous Install SQL Data Path: C:MSSQL712:07:44 End Action Detection12:07:44 Begin Action: ODBCLocked12:07:44 End Action ODBCLocked12:07:44 GetDefinition returned: 112:07:44 Previous SQL Server ProductType: MSDE [0x4]12:07:44 This combination of Package and Operating System allows a fullproduct install.can anyone think of anything here..what else could be causing the server to think there is a previousversion of SQL 7 on this box!!!?
View 1 Replies View RelatedI get an error when trying to install the SQL Native Client. It
says it cannot find the installation package and to use a valid copy of
'sqlncli.msi'. I've downloaded the Express setup twice and get
the same error from both of them.
I'm attempting this in a VMWare session setup for Windows 2K, Advanced
Server. I am trying to test my installation and setup
procedures. This is not a production setup, just install testing
and documentation. I have allocated only 272MB to the VMWare
session, which is why the system doesn't meet the recommended settings.
Any help would be greatly appreciated.
Below is the Summary.txt output file.
Microsoft SQL Server 2005 9.00.2047.00
==============================
OS Version : Microsoft Windows 2000 Advanced Server Service Pack 4 (Build 2195)
Time : Wed May 03 09:54:23 2006
CPCWIN2KVM1 : The current system does not meet recommended hardware
requirements for this SQL Server release. For detailed hardware
requirements, see the readme file or SQL Server Books Online.
Machine : CPCWIN2KVM1
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.2047.00
Install : Successful
Log File : c:Program
FilesMicrosoft SQL Server90Setup
BootstrapLOGFilesSQLSetup0003_CPCWIN2KVM1_SQLSupport_1.log
--------------------------------------------------------------------------------
Machine : CPCWIN2KVM1
Product : SQL Native Client
Error : An
installation package for the product Microsoft SQL Server Native Client
cannot be found. Try the installation again using a valid copy of the
installation package 'sqlncli.msi'.
--------------------------------------------------------------------------------
Machine : CPCWIN2KVM1
Product : Microsoft SQL Server Native Client
Product Version : 9.00.2047.00
Install : Failed
Log File : c:Program
FilesMicrosoft SQL Server90Setup
BootstrapLOGFilesSQLSetup0003_CPCWIN2KVM1_SQLNCLI_1.log
Last Action : InstallFinalize
Error String : An installation package for the
product Microsoft SQL Server Native Client cannot be found. Try the
installation again using a valid copy of the installation package
'sqlncli.msi'.
Error Number : 1706
--------------------------------------------------------------------------------
Machine : CPCWIN2KVM1
Product : Microsoft SQL Server VSS Writer
Product Version : 9.00.2047.00
Install : Successful
Log File : c:Program
FilesMicrosoft SQL Server90Setup
BootstrapLOGFilesSQLSetup0003_CPCWIN2KVM1_SqlWriter_1.log
--------------------------------------------------------------------------------
Machine : CPCWIN2KVM1
Product : MSXML 6.0 Parser
Product Version : 6.00.3883.8
Install : Successful
Log File : c:Program
FilesMicrosoft SQL Server90Setup
BootstrapLOGFilesSQLSetup0003_CPCWIN2KVM1_MSXML6_1.log
--------------------------------------------------------------------------------
Hi every one,
I'd like to install SQL SERVER 2005 Express Edition ,I begin to install it from DVD but during the installation it dosn't ask me about any instance and after installation there isn't SQLExpress service and I can't use sql server .(there are not MSSQL and Binn directory in sql server 2005) but when I install visual studio 2005 and after that I install sql server 2005 it ask me for name of instance and with this way every thing is ok and I use sql server completely.
I 'd like to know the complete installation of sql server 2005 is depend on installation of visual studio 2005 befor it ?if not how can I introduce any instance after installation of sel server 2005 .
Hello,
Yesterday, to start SQLServer, I have used the DOS Command
setup SAPWD=xxx from C:sql2ksp3MSDE.
I think tne mix mode of authentification is correct.
But when I want to connect to the database by SQLEntMan, it doesn't work ...
How can I connect to SQLServer ?
Server adress = name of the computer
Username = ?
Password = password of windows ? password of of SAPWD ?
Thank you any help
Ben
Hi, I ama trying to install SQL Server Express 2005, when the setup.exe does an anlysis of the machine configuration it tellme that out of 10 checks one has failed, and that the machine needs tobe rebooted in order to fulfill a requirment from a previous installation, I did this and went to start the installation process again only ot be told that this check failure still exists, unfortunately I cannot progress, has anybody experienced this, I am using Windows XP Hone, with ASP.NET 2.0 installed and Web Dev Express 2005 Beta 2Looking forward to hearing fom you
View 3 Replies View RelatedI am trying the SQL 7 STANDARD installation on WIN`98. However, it creates the directory structure on the hard-disk alonwith files but on connecting to server it comes out with a VC++ assertion failed message.
The TCP/IP sockets are being used and the TCP/IP port (local ping) is working fine. Windows 98 was installed again and there are no prequisites for SQL 7 on 98 but the problem persists !
Anyone who has installed it on WIN`98 ?
TIA
Raghu
I have problems after installation in W98 of the Desktop.
In Enterprise Manager when I try to connect to the server gives the following error:
Assertion failed!
program c:windowsmmc.exe
file: ../src/sqlsspi.c
line: 119
Expression: Count
after I click on RETRY and gives the error:
a connection could not be establish to TEST05 - [SQL-DMO]code execution exception:
EXCEPTION_BREAKPOINT.
Please verify SQL SERVER is running and check your SQL Server registration properties and try again.
I check, and in Service Manager is TEST05 - MSSQLServer - running.
Also in Query Analyzer gives an error:
Assertion failed!
program c:mssql7innisqlw.exe
file: ../src/sqlsspi.c
line: 119
Expression: Count
after I click on RETRY and gives the error:
This program (ISQLW) has performed an ilegal operation and will be shutdown
ISQLW caused an exception 03H in module MSVCRT.dll at 0177:7800...
Where is the problem? From wrong installation or W98?
The installation CD was camming in the book :
"Special Edition" - Using SQL SERVER 7.0 from Stephen Wynkoop.
Please reply,
Tanks.
Hi:
We ran SQL Replication in Production SQL 7.0 with SP1. We encountered some problems. We ran the same tests in QA which used SQL 7.0 with SP1. The problems were gone.
Both Production and QA used SQL 7.0 with SP1 but they came from different resource CDs. Production one was installed from Microsoft Select CD in 1998. I did not recall the CD which was used for QA.
It indicated those two SQL 7.0 functioned differently and Production on had a bug in it. Can somebody to share with me a detecting tool and a criteria to find out where is wrong in the Production SQL 7.0?
Thank you.
Joan
Hi,
I am having pentium 3 with windows 98 I had Sql Server 7 installed But due to some problem i uninstalled it.
I am having difficulty in reinstalling the same i uninstalled completely and even removed entries in registry and tried to install But i am getting the same error always.
1)Acmsetup failed
2)setup failed to configure the server Refer to the server error logs and cnfgsvr,out for more information
There is nothing in server error logs
cnfgsvr.out file looks like this
Starting Service ...
An error occurred while attempting to start the service (1460)
SQL Server configuration failed.
What is ACMSETUP what it does how i can prevent its failure is the failure of ACMSETUP a reason for sqlserver set up failure
I appreciate ur replies
I have installed sqlserver 2000 (desktop edition) on my pc at home. I am running windows xp home edition. what i am finding is i am not able to log in to either Enterprise Manager or Query Analyzer. I have tried using different accounts during installation.
The service has started and the server seems to be running, but I cannot make a connection.
any suggestions,
thanks,
jim
We have installed SQL Server 6.5 in an NT system. We are able to start and stop the server from a client enterprise manager, but unable to connect to the databases there(ie., we are able to right-click on the server and start and stop the server but unable to right-click and connect to the server). Can anyone help us out with this?
View 1 Replies View RelatedHey guys, I'm new to this and had some general questions. I'm currently running windows xp pro with sql server 2005 tools installed. However I cannot deploy any of the reports due to not having IIS installed. I've now installed IIS however, do I need to completely uninstall SQL Server 2005 tools and is there a particular order to uninstall it in order to get everything to work?
As you can see I'm totally lost/new to this.
I tried to install sql server 2005 professional Edition in my machine.While doing the step by step installation, it was not showing the " Instance name " and " server accounts" ( i.e whether it is built-in system account or domain user account) slides and so finally i am not able to complete the installation. Kindly help me to rectify this. Thanks in advance.
View 1 Replies View RelatedHey Guys,Im going to install the SQL Server 2005,can any one tell me what are the things do i need to know before the installation.Its 64 bit and clustered.Active/passive
View 2 Replies View RelatedI am new with SQL and have a question regarding SQL Connections. I have 2 Win2003 Servers(tom and Jerry) setup with Microsoft Cluster installed in Active-->Active Mode. Also, on both of these servers, I have SQL 2000 installed in Active-->Active mode as well. So I installed SQL2000 on Tom first and gave the SQL server name of Dog1 which has and IP assigned to it, at the same time I gave an instance name of D1. So now my SQL on Tom server reads Dog1D1. I did another installation on Tom and gave it Dog2D2. Than I went and installed SQL again on Jerry, this time and gave name of CatC3, and CatC4.
Now in my DNS, I have Dog1, Dog2, Cat3, Cat4 defined with an IP I assigned.
Problem I am running into is I cannot connect my application or make and ODBC connection to Dog1D1, Dog2D2, Cat3C3 or Cat4C4. I am getting Server not found message.
Can anyone help me and tell me where I am going wrong, as I need to get this app up ASAP.
Thanks,
Jay
Hi guys,
i am new to the forum. i got sql server 2000 and i wanted to install it on my home pc. i am able to do that.
But when i create a database out of it and then take it out of the SQl folder and put it in some other folder in my C: drive and then if i try to link it to my program it gives me a error stating that it is not accessible.
MY QUESTION : Am i doing something wrong ?
Do i have to set some properties on the database i
create?if yes how to do it?
Plz reply
Thanks
Hi,
SQL Server 2005 has been installed on windows server 2003 machine by the support team.
Microsoft SQL Server Management Studio9.00.3042.00
Now this machine has been passed on to me to create databases, tables, etc...
On this server, I open the management studio and I get the connect to server windows.
What should the entries in the connect to server window be for me to get to the next stage where I can start building databases.
At present, I tried local or localhost and windows/sql authentication.
Still can not get to the management studio window.
Any thoughts please?
Thanks
Hi experts,
I have installed SQL server 2005 Standard edition and SP2 in production box, after completion of installation the perticual production server is not connecting, but every other servers are getting connect through that instance, and one more main issue is i could not able to see this instance in SERVICES.MSC, I was wondered, how come it is not showing!!!!!!!!!!!!!!!!
-Thanks N Regards,
Kanthi.
hi
i m trying installing sqlserver 2000 in my PC(WIN XP). all the process are happening properly.. but while starting SQL and Configuring the database the setup exists and throws the message to check sqlstp.log.
when checked, i got this error.... please help
Starting Service ...
SQL_Latin1_General_CP1_CI_AS
-m -Q -T4022 -T3659
Connecting to Server ...
driver={sql server};server=RAVIN;UID=sa;PWD=;database=master
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
driver={sql server};server=RAVIN;UID=sa;PWD=;database=master
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
driver={sql server};server=RAVIN;UID=sa;PWD=;database=master
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
SQL Server configuration failed.
thanks in advance
regards
Ravin
HiWe have the following setupW2k server with IIS 5.0Asus P4P800E Deluxe MoboP4 2,8 Mhz - 1 Gb Ram3 sata harddisks1 hd = 2 partitionsc: boot/systemf: backup2 hd's in a raid 1 (mirror) Promise controllere: webrootWhere would be the best partition to install a MS SQL2000 databas?It's possible to install a 4th ide harddiskKitty
View 3 Replies View Related
Hi,
I had SQL Mobile installed on my XP PC. As I wanted to use INSERT IDENTITY, I uninstalled SQL Mobile from my Pc. Now I see two problems:
1. Even after uninstalling SQL Mobile and rebooting my PC, I still see SQL Mobile option when I start SQL Server Mgmt Studio. Any reason why?
2. I then installed SQL CE desktop runtime (nearly 1.8 MB) and rebooted my Pc. Now when I go to Query Analyzer, I still cannot use IDENTITY Insert.
3. There seems to be two versions of CE download: one for desktop and one for mobile. Can anyone let me know which one I should download for desktop? And for deployment on device which version I need to download?
Regards,
vj