SP1 - Killing Integration Services
Apr 5, 2007Don't know what's the problem while installing SP 1 it just kills the Integration Services. Did any one had this issue?
Thank you - Ashok
ADVERTISEMENT
How To Optimize Integration Pacakages Or Best Practices For Integration Services
Sep 11, 2007Hello friends.
I managed to design an Integration service package,but the desired level of performance has not been achieved(i.e it is performing slow).
So I want to know what are the best practices for optimized solution .
In my package I'm exreacting data from XML file and Storing it in SQL server database with some processing dring data flow.
I'm using
1) Two Script Task Control -In these control,I m opening the connection to XML file through VB.net code and
iterating each record at a time.
2)Two OLE DB Command -Each fetched record from script task component is processed in OLEDB command through
stored procedure and then inseted into database.
3)One for Loop -This loop contains two script Task control and two OLEDB Command control,
(mentioned above),for fetching single record and inserting it in database.
4)One derived Column
5)One Multicast
6)One Character Map
7)One OlEDB Source
As with my current performance I'm able to insert one record in every .5 second (Which is much below to acceptable limits)
Is control lying disabled on SSIS designer pane also affect the performance of execution.
SQL 2005 SP2 Reporting Services And Window SharePoint Services V3 Integration Config Issue
Mar 23, 2007Hi,
I have just install SQL 2005 SP2 and trying to get Window SharePoint Services V3 integrated with SQL 2005 SP2 reporting services.
In SharePoint Central Administration, I select the Reporting Services Integration page and have setup the Report Server Web Service URL and Authentication Mode. I then goto Grant database access, specify the SQL server name, get promted for a username and password that has access SQL Reportserver and get the following error "The group name could not be found"
Does anyone have any ideas?
Thanks
Analysis Services 2005 Database Processing Fails When Run From Integration Services
Oct 11, 2007Hello, I have a problem when trying to fully process an SSAS database using Integration Services "Analysis Services Processing Task" task. I have 2 of these tasks which are responsible for processing the Dimensions then the Cubes. When I run the package either via the BIDS environment or on the local server from the Integration Services engine, I will get an error after about 20 minutes stating:
"Error: Memory Error: Allocation failure. Not enough storage is available to process this command""Error: Errors in the metadata manager. An error occurred when loading the <cube name> cube from the file \?D:Program FilesMicrosoft SQL ServerMSSQL.2OLAPDataMyWarehouse<cube file>.xml"
The cube name is not specific, it will fail and any of my cubes could be in the error log
If I fully process the AS database using the AS engine (logon to local AS server, right-click AS database and click Process), I get no errors at all, it processes and completes fine. The processing options are identical when I run in AS or via the SSIS "Analysis Services Processing Task" task.
I've searched quite a lot online but no joy, the information I have gleaned from various sites does not directly link SSIS with SSAS processing problems.
When either the AS processing starts via SSAS or SSIS the memory usage of MSMDSRV.exe increases to around 1.4 / 1.5 GB but never goes to 2GB ever, even when the error appears.
I've done the following with no effect.
" Have run via AS and works fine
" No specific cube it fails on
" Have created a Dimension only package, same problem
" Changed the maxmemorylimit
" Changed the connections to localhost
" Memory DOES NOT max out on server
Server Specs:
Windows Server 2003 Standard + Service Pack 2
4GM ram, 2GB paging file
SQL Server 2005 + Service Pack 2
Can anyone help?
Andy
Integration Services Notification Services
Apr 18, 2007Does anybody know of a notification services using SSIS? Is it SendMail or otherwise? Is there a step-by-step practice on how to create one?
View 19 Replies View RelatedKilling The Xp
Apr 11, 2000Hey,
How can we kill a process initiated by an Extended Stored Procedure.
For example, I issued
exec xp_cmdshell "C:Notepad.exe"
and scheduled as a job and it started running and it never finished.
I dunno watz goin on behind the scene and i couldnt kill the process.
Anybody who knows how to do it,please help me out. And my process is still
running in the server for more than two days. Do i have to restart the
server? If so, everytime when it get a problem like this, am i supposed to restart?
Please help me in this issue...
Integration Services
May 24, 2007Is there a way to give customers access to SSIS? They need to be able to create their own SSIS packages. Of course we have more then one customer so it would be nice to have modular security in place where they don't get to see customers abc and customer xyz packages. Only their own.
thanks!
Help With Integration Services !!!
May 8, 2008Hi All,
I have created an integration services project (attached is a screenshot) that workes against the flat file (.DAT extension) and it does some manipluation in the data and then load it into the table. Everything works fine.
Now I want to get the name of my flat file source fille (which is a .DAT file) and then insert it in the table.
I am running th integration services against different .DAT files (only one file at one time) which are located on different locations.....so what I want is that, whenever I run the package it do the usuall processing and then while loading the data in to the destination table, it also load the name of the file into the destination table (lets called a field "FileName" of nvarchar type in the table "Comphistory")
How can I achieve this?
I am looking for a quick and easy help.
Thanks,
Zee
BUG In Integration Services
Jul 25, 2007Problem
When you have a SSIS package that contains a connection from a data source, this connection is not updated when the data source changes based on a configuration change.
Situation :
A SSIS solution contains 3 configurations : Development, Test, Production. You can create those configurations in configuration manager of the solution.
The SSIS project contains one Data source. It doesn't really matter what type but I take SQL Server. The database server in development is SQL_DEV, in test is SQL_TEST and in production is SQL_PROD. Initially they are for all configurations the same. You can specify those values by changing the active configuration and then editing the Data source.
In the SSIS package (DTSX), you can create a connection manager based on a Data source.
If you change the Data source, the connection manager is also changed. If you change the Data source by changing the active configuration, the connection manager is not being updated.
If you think this isn't a big issue think big. We have 4 configuration, 10 shared Data sources and 25 DTSX packages. That would give a maximum of 1000 settings (4 x 10 x 25). Using this method it can be reduced to 40 (4 x 10). Of course this is a theoretical but it is very common to have the destination data source re-used on all packages, which still would be 100 settings (4 x 25)
Steps to reproduce
- create a new SSIS project
- In the solution explorer, create a new Data source named TestSource.
- In the connection managers window of Package.dtsx, create a new connection from a Data source.
- Make some changes in to TestSource.ds under the Data Sources. For example change the server or the database.
- Verify that those changes are also in the package.
- in the solution explorer, right click the solution and select configuration manager
- under active solution configuration, create a new configuration named test.
- Set the copy settings from : development
- Verify that Create new project configuration is checked.
- click OK and close.
- Notice that the active configuration is now Test
- Make some changes the Testsource.ds like a different server.
- Verify that those changes are also in the package.
- Make the development configuration as active.
- Notice that the Testsource.ds contains now the original settings.
- You will notice that the connection manager still contains the "test" settings and not the development settings.
- If you create a deployment utility it will still contains the wrong values.
with regards,
Constantijn Enders
Integration Services
Jun 16, 2006Hi all,
Can someone explain to me why I am getting this kind of error though I am able to integrate all the data succeesfully to the next destination.
Ronald
SSIS package "Prescription.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning.
Error: 0xC0202009 at Data Flow Task, SQL Server Destination [521]: An OLE DB error has occurred. Error code: 0x80040E14.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 58, column 1. The destination column (PatientId) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 27, column 12. The destination column (ServiceId) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 26, column 12. The destination column (ServiceId) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 25, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 24, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 23, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 22, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 21, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 20, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.
Integration Services?
Apr 25, 2006Hi,
is Integration Services included in SQL Server Express?
In what version/module?
Thanks
just Do It
Integration Services
Jun 16, 2006Hi all,
Can someone explain to me why I am getting this kind of error though I am able to integrate all the data succeesfully to the next destination.
I am trying to get the Prescription table from Access to SQL SERVER 2005 database
Ronald
SSIS package "Prescription.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning.
Error: 0xC0202009 at Data Flow Task, SQL Server Destination [521]: An OLE DB error has occurred. Error code: 0x80040E14.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 58, column 1. The destination column (PatientId) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 27, column 12. The destination column (ServiceId) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 26, column 12. The destination column (ServiceId) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 25, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 24, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 23, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 22, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 21, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 20, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.
Integration Services
Jun 20, 2006I'm trying to use the new integration services and have found all kinds of help for it, but where is it? I can't find it. Is it in the SQL Server Management Studio?
TRANSACTION Is Killing Me...
Jul 8, 2005Hi, i was try a very simple transaction, but it show me error: Exception Details: System.InvalidOperationException: This SqlTransaction has completed; it is no longer usable. Below is my code, wat i did wrong for tis... i tried 2 days just for transaction alrd.... pls help.Sub bt1_click(sender as object, e as eventargs) dim i as integer Dim myTrans As SqlTransaction dim strExDate,StrSAPNum,strID,StrPartNum,strRemark,strWAID,strQty,strQty1,StrPartNum1 as string '================ loop thru n insert data=============================== try for i=0 to DgData.items.count-1 strExDate = CType(dgData.Items(i).FindControl("tbExDate"), textbox).text strRemark = CType(dgData.Items(i).FindControl("tbRemark"), textbox).text strQty = CType(dgData.Items(i).FindControl("tbQty"), TextBox).text StrSql="Insert into tbl_GrDE(Qty, ExDate, Remark, EntBy) Values " & _ (@Qty, @ExDate, @Remark, @EntBy)" ObjCmd=New SqlCommand(StrSql, ObjConn) With ObjCmd.Parameters: .Add(New Sqlparameter("@qty", strQty)) .Add(New Sqlparameter("@ExDate", strExDate)) .Add(New Sqlparameter("@Remark", strRemark)) .Add(New Sqlparameter("@EntBy", session("User_ID"))) End with
ObjCmd.Connection.Open() myTrans = ObjConn.BeginTransaction ObjCmd.Transaction = myTrans ObjCmd.ExecuteNonQuery() ObjCmd.Connection.Close() next myTrans.Commit() catch ex as exception response.write("error") myTrans.Rollback() end tryEnd SubRegardslife's Ng
Killing Process
May 30, 2001Hi
One DTs package job running and we stop the job.Job was stoped but process not killing.We tried using kill spid but no use.please any body give suggestion. this production server.
HELP Killing Users
Jan 10, 2001Please could anyone help I run an restore on a specific database overnight, in order to do so I have to kill all user connections. When I try to kill all user SPIDs some still remain ? , why please can anyone help me !
Heres a typical example of what I am doing:
sp_who snapshot of before the kill:
61,sleeping,TDI.CO.UKSUZANA, ,0,RPT,AWAITING COMMAND
63,runnable,TDI.CO.UKNEILL, ,0,RPT,SELECT
Attempting to disconnect 2users
KILL 61
KILL 63
sp_who snapshot of After the kill:
63,runnable,TDI.CO.UKNEILL, ,0,RPT,SELECT
I would greatly appreciate any help , im using SQL Server 7 currently
Many Thanks,
Marcus Stuart
Help Killing Spid
Dec 22, 1999I'm going to try to explain my situation.
I have a spid that I'm not able to kill, this were a select statement from with in access 97 application using a DNS connection.
So even that I reboot the client pc and kill the spid it still shows as active with status RollBack.
We have similar problem before and the only way that it disappear were re - starting Sql.
(system Sql 7.0 with sp1 and Access 97)
Thanks.
Killing A Login
Apr 15, 2003I have a script that I use to see if someone has been logged in for too long. Does anyone know how to take a varible spid and kill that login. I tried using kill @spid, but that does not work. Any Suggestions?
View 1 Replies View RelatedKilling A Process In SQL 6.5
Aug 28, 2002Dear SQLGuru,
I hope you can help me to find the way to resolve this issue.
When I've accidentally triggered a process in SQL 6.5 without knowing that it's going to hold a lot of resources and making the network very slow and end users will be started complaining about the slowness.
I've no other way other than the killing the process kill <spid>. Funniest part is, even it is not get killed even when I tried multiple times and the process is still active and still running.
When I tried to find the way out, One another guy stopped the SQL server and restarted again. That's it, it took a long time to stop and restart and ends up with the recovery mode of the database and it was running more than 3-4 hours to get into the usual mode.
Based on the scenario, what would be your suggestion when I've encoutered the same situation. I've triggered some application like DBCC checkdb and it's keep running for a long time. But I need to kill the process immediately without affecting any other process. Pls. advise me.
Thanks a lot,
Naga
Killing Spid -2
Apr 15, 2002I have a problem. I am trying to kill a spid that is blocking updates to a table.
The spid number is '-2'. I am using KILL with UOW and I am getting this error:
Server: Msg 6112, Level 16, State 1, Line 1
Distributed transaction with UOW {FCF8D536-27ED-11D6-9CF2-0002A56BDA54} is in prepared state.
Only Microsoft Distributed Transaction Coordinator can resolve this transaction. KILL command failed.
Users are connecting through MTS server. I am runnnig SQL2000 sp2 +hotfix, on NT4.0.
Has anyone encountered this problem before, and has a solution for it (besides rebooting the MTS and SQL Server)?
Thanks,
Peter
Killing A Thread
Dec 2, 2004Hey all,
Just wondering if there is any way to kill a thread within an sqlerver process. The thread we are trying to kill is a rollback statement that has been running for a very long time.
Any ideas ?
Thanks in advance,
Kilka
Killing A Process
May 25, 2008If we have a deadlock we will check in the error log and and find the spids which are involving in the deadlock.
We will kill one of the process by using SPID (no) KILL.
Is there specific steps to consider while killing a process
Integration Services (SSIS)
Jul 25, 2007Hi,
I want to insert datas from a txt-file into a sql-table.
Therefor i would use a xml-file for the structure!
How can i refer this xml-file to a measurement insertion task?
Tanks for your help and sorry for my bad english :rolleyes:
SQL 2005 Integration Services Help
Jul 23, 2005I am trying to know how to read many XML files within one data flowtask. I have many many files that I would like to apply to with thesame data flow so I need to know how to read them in and what taskshould I use under SQL 2005 DTS/Integration services.Thanks for your help!JON
View 1 Replies View RelatedDoubts On Integration Services
Jan 14, 2008Good morning,
I've to do a mining project and I intend to use the SSIS.
I've done a clustering plugin last year on analysis services and I also want to use it.
Let me try to explain the architecture of the process:
1) Receive data (read data from the database - these data are texts, actually)
2) Pre-process the data (transform the texts in a sparse matrix) using a new plugin
3) Call my clustering plugin and assign it to read the table created on the previous step
4) Call my KNN plugin to classify other pre-processed texts using the clusters found on the previous step as classes.
5) Show results.
Alright... It all running as a workflow on integration services
Here are my doubts:
A) How to view and use my plugin made for Analysis Services on Integration Services ? (is it possible or will I have to create another plugins from zero just to run on Integration Services ?)
B) Assuming the previous step is possible, how to modify my plugins to define inputs and outputs to do the correct communications between each plugin ? I think this is the most important question. Is it simple to do ? Is there any documented examples ?
Thanks a lot for your attention once more,
-Renan Souza
Essbase And Integration Services
Apr 24, 2007is it possible to use integration services to extract data from essbase?
View 3 Replies View RelatedCannot Install Integration Services
Nov 15, 2005Hi!
View 28 Replies View RelatedCannot Connect To Integration Services
Nov 16, 2006When i try to connect to SQL 2005 integration services from object explorer i get connected (in the sense it shows in object explorer running packages stored packages ..)but when i try to exand any of these objects i get the following error
--------------------------------------------------------------------------------------------------
Failed to retrieve data for this request(Microsoft.sqlserver.smoEnum)
Additional information
The sql server specified in SSIS service configuration is not present or not available.This might occur when there is no default instance of Sql server on the computer. For more information see "config integeration services" in server 2005 books online.
Login time out expired
An error has occured while establishing a connection to the server.When connecting to the Sql server 2005, the failure may be caused by the fact that under default settings Sqlserver does not allow remote connections.
Names Pipes Provider: could not open a connection to Sql Server[2].(MsDtsSrvr)
----------------------------------------------------------------------------------------------------------
i have chkd remote connection settings and other settings but cant find a way out.
kindly provide some help
Thanks in advance
Upgrading To Integration Services From DTS
Sep 26, 2007Hi
We have developed a datawarehouse using DTS in 2000. Now we have started using 2005 and as it supports DTS so there no issued for our datawarehouse to run.
But every six months there are new requirements and we achange and add to the existing DTS, but now DTS development is not supported in 2005, can we use itegration services for the same and embedd it with the existing DTS or do I need to redevelop the datawarehouse using SSIS.
Integration Services In SSMS
Jul 12, 2007We use Windows Authentication to connect to SQL Server, is there any special permissions required to connect to Integration Services in SSMS?
Whenever I try to browse the servers available with Integration Services (from Object Browser), none of the servers gets listed. If I directly give server name and try to connect to Integeration Services I get the following error. But I'm able to connect to the database engine.
TITLE: Connect to Server
------------------------------
Cannot connect to <servername>.
------------------------------
ADDITIONAL INFORMATION:
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
Connect to SSIS Service on machine "<servername>" failed:
Access is denied.
------------------------------
Connect to SSIS Service on machine "<servername>" failed:
Access is denied.
Thanks
X Cannot Run On This Edition Of Integration Services. Again!!
Oct 11, 2007Hi,
I'm a little confused now on when I need to install SSIS services, according to the following
http://msdn2.microsoft.com/en-us/library/ms345193.aspx
I don't need to have SSIS service installed on my sql server to run SSIS packages as jobs. So I've now deployed my packages to our live clustered SQL server, and I even have a package that runs to a point.
So basically the package imports some data then reprocesses a dimension on the cube, it imports the data ok, then fails to process the cube with the following message
Description: The task "Process Cube Dimension DimFiscalPeriod" cannot run on this edition of Integration Services. It requires a higher level edition.
Now the SQL server is enterprise edition, so do I really need to install SSIS on this server or not ?
Thanks for any help in advance
Steve
Integration Services :: RPC Server Not Available
Nov 5, 2015I'm having issues trying to connect to a remote SSIS server. Connection between servers within the DC works. Port TCP 135 and 139 are open. Also tried to connect using IP address but the same error occurs. Do i need to open more ports?
The SQL version installed in 2014.
Integration Services :: First Day Of The Year
Jul 17, 2015I try to build a variable with the first day of the year so I could calculate the YTD.
I play with DATEADD, DATEPART and DATEDIFF functions but I unable to get the date.