Hi,
I need to set a label in my report when all the values in a certain multivalue parameter are selected. In other words, i would need to check whether this parameter has the value "Select All" selected or not.
How do i accomplish this?
Thanks in advance,
Claudio
Hi. I am fairly new to reporting. I have a report that currently displays queried data in both a table and a matrix. I'd like for the data that is displayed to be based off of my report parameters. I have three, all of which are multivalue. Currently, I am able to display the report, based on the only the first value of TWO of the three parameters. I tried using the dataset parameters, but was not successful with linking them to my report parameters. Please help! In addition, is there a way to set multivalue parameters to only display distinct values? Thanks, in advance, for any help.
View 3 Replies View Relatedhow do I create a multivalue parameter that has a default value of 'All' Or how to I I get the "Select All" option as the default parameter?
View 3 Replies View Related
i am trying to build a report that uses multivalue parameters - the report is a simple listing report that lists out a list of cases as a table - the data is obtained from a view which just returns all details for all cases
there is no user input for the selection details - am going to be calling the report and passing over the parameter values directly to it.
there are several parameters for the report - they all default to "All"
for each of these parameters, i need to be able to either use the default value of "ALL" or to enter a list (comma separated ?)
q1) could i just enter the list as a string comma separated list (rather than as multivalued parameters) and then use this list to filter the data using the FILTERS tab on the dataset
q2) if q1 is not possible, if i use multivalue parameters, how do i get my list of parameters into the report as the application calling the report just has a list of values
thx
mark
Hello Friends,
I have a report (Say Report 1)which is asking for a multivalue parameter Period. The user selects three period from the dropdown list available for the Parameter. Lets say that the user select 0407,0507,0607. Now is this report 1 there is a particular field which is linked to another sub report. So if the top level Report 1 supplies the revenue for 3 regions say for the periods selected then clicking on any of the regions would open a second detailed report, say Report 2 for the three periods as selected.
Till this everything is fine.
Now the problem is that in this detailed Report 2 there would be a particular text box as "Click here to naviagate back to parent report". So that when the user clicks on this cell he is taken back to the parent report, Report 1 which was originally generated for the 3 periods.
Can anyone please advise as to how the Multivalue Parameter which was passed from Report 1 to Report 2 can again be looped back to Report 1 from Report 2.
Thanx Friends,
Raktim
I'm trying to output all the values selected through a multivalue parameter, but I am having difficulties. In the text box, the parameter contains only four member functions (value, label, count, ismultivalue). However, to output a value or label for the parameter you need to specify an index in the form of:
Parameters!Names.Value(0)
Ideally, I would like to be able to obtain all these values with a function call, but it doesn't look like there is one. Any ideas of how to get all the values?
Thank you!!
Greetings all
trying to get a multivalue parameter to accept either typed in data ex: 111111111,111111112 or if I want to return all id numbers type in %. Problem is when I test it by typing in 111111111,111111112 it throws an error saying " Incorrect syntax near ','.
I can enter 111111111 or % and get results, the error comes when I try to type in two or more id numbers. the parameter in the dataset looks like
where a.id_number LIKE (@id_number+ '%')
any suggesstions? Im sure there are threads out there but Im pressed to meet a deadline and wanted to see if there were any quick solutions
thanks
km
Hi,
I've tried using the same method mentioned in the dozens of posts dedicated to this topic but it's not working.
My SQL statement is:
SELECT [University Origins].Origin, COUNT([University Origins].Origin) AS TotalCount, Hospitals.Name
FROM Posts INNER JOIN
Hospitals ON Posts.HospitalID = Hospitals.[Hospital ID] CROSS JOIN
[University Origins] INNER JOIN
Incumbents ON [University Origins].[Uni Origin ID] = Incumbents.[University Origin]
WHERE (NOT ([University Origins].Origin = 'No answer')) AND (Hospitals.Name IN (@HospitalFilter))
GROUP BY [University Origins].Origin, Hospitals.Name
The HospitalFilter parameter is set to Multivalue and it's populated with it's own SQL statement giving the Distinct Hospitals.
I have setup a filter on my table with the following expressions:
Expression: =Trim(Fields!Name.Value)
Operator: = IN
Value: =Trim(Parameters!HospitalFilter.Value.ToString )
I have used Trim to remove leading and trailing spaces.
Running the report always returns zero results and I'm puzzled by this. Would appreciate any advice and suggestions
Thanks,
John
hi all,
Is there any way to restrict the user from selecting the parameters. For example: I have a list of 100 values in a multi-value parameter. I want to to restrict the user to select at the most N number of values.
If possible, process only the N number of values will also do.
Thnx in advance...
Hi all,
I want to show the above. Can someone elighten me how I can loop thru to concatanate the values?
Regards,
Farouk Yew
I've created a line chart in my report which lists number of transactions by month. I've also created a report to list transactions by day. My goal is for the user to select a month and link the report to the graph with the selected month divided up into days (in other words, the user wants to see the number of transactions for each day in the selected month).
Anyway, everything is working perfectly except for one thing. In the list of parameters that I am passing to the report for each day, I want to pass a multivalue parameter which contains all the transaction IDs the user selected in creating the report (these are supplied by a multivalue parameter). However, in the parameter dialog box where it asks for a value to send to the awaiting parameter, I do not know how to supply more than one value. If I need to pass one value, it will work fine. However, I would like to do something like:
JOIN(Parameters!TransactionID.value, ",")
for the value of TransactionID, but when I generate the report it is not accepting the values. I'm pretty sure its just a format issue, and I just need to know how exactly I should pass these values.
I already understand that when passing multivalue parameters in a URL you need something like:
TransactionID=1&TransactionID=2
...in order to select multiple values. However, this is a slightly different situation. I'm really running out of ideas, so any help would be much appreciated.
Thank you guys so much
Hi All,
Is there any way to make Multivalue parameter ( list parameter) in Report builder as optional ?
I was able to achieve optional functionalitiy for parameter is single value but not able to with respect to multivalue parameters
An early response is highly appreciated
Thanks
I am using a 2005 SSAS cube as a datasource for 2005 SSRS report with multivalue parameters. I use the design mode query builder to generate my MDX. I then add my parameter to my parameter field in the filters section. The name and value of the parameter in the dataset editor is as follows:
Name: FacilityFacilityNumber
Parameter: Parameters!FacilityFacilityNumber.Value
I then proceed to layout mode and then open up report parameters. I then check the multivalue box and select non-queried available values. I choose non-queried radio button because I want my asp page to be passing in the parameters, not a dropdown list.
The problem is that when I try and preview the report and I type in just one parameter I get the following:
"Query (1, 437) The restrictions imposed by the CONTRAINED flag in the STROSET function were violoated"
After looking through a couple of forums I found that adding the following Parameter value in the data tab and dataset editor would help me out a bit:
"[Facility].[Facility Number].&["+Parameters!FacilityFacilityNumber.Value+"]"
Ok so now (in layout mode) I type in one parameter and I get a report back, BUT when I try to type in a second or more parameter I get the same error as before:
"Query (1, 437) The restrictions imposed by the CONTRAINED flag in the STROSET function were violoated"
Here is the MDX query that I am using for this report:
SELECT NON EMPTY { [Measures].[Claim Count], [Measures].[Item Reasons Count], [Measures].[Charged Amount] } ON COLUMNS, NON EMPTY { ([Facility].[Facility Number].[Facility Number].ALLMEMBERS * [Claim Status Codes].[CLaim Status Code].[CLaim Status Code].ALLMEMBERS * [Claim Status Codes].[Claim Status Description].[Claim Status Description].ALLMEMBERS ) } DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS FROM ( SELECT ( STRTOSET(@FacilityFacilityNumber, CONSTRAINED) ) ON COLUMNS FROM [Claims Remittance]) CELL PROPERTIES VALUE, BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING, FONT_NAME, FONT_SIZE, FONT_FLAGS
Please, if anybody know's what I am doing wrong I would greatly appreciate it.......I have to have my report accept non-queried multivalued parameters. Thanks
SSRS - SP2
We have many reports with cascading multivalue parameters. The reports and the parameters work as expected within the BI development and when deployed to the RS server. The issue we are having is that when we go to the Report Manager webpage for one of these reports and create a New Subscription the report parameters in the subscription field fail to populate. The first one or two parameters may properly populate but the 3rd, 4th, and 5th fail to populate. As a result we can not select the parameters to submit the subscription.
We have two example reports where one report uses only sql (text) and the other report uses only stored procedures. Both reports have 2 or more cascading parameters.
Any known issues with cascading multivalue parameters in the Report Manager subscription view?
We have a report that has a banner page. The user can select categories from a multi-select parameter and then this is passed into the report as a csv file. The actual report works doing this, however, we need the banner page to use this parameter's value (the multiple selected labels) to display a string of the selected values. For the textbox expression, we are using =Parameters!Cat.Value, but it always wants to reference Paramaters!Cat.Value(0). We were thinking of using a function in code to pass in the parameter and then concantenate each value into on string and return that string, but isn't there an easier way to do this?
Thanks for the information.
I have passed a list of parameters to a multivalue parameter in a SQL Report.
I can click the drop down and see the list of parameters that were passed.
In my select statement for the report, here is the condition I am using in the where clause.
AND (SUBSTRING(C.CHARTOFACCTSACCOUNTNO,9,3) IN (@RUs))
Nothing is returned in the result set if more than one value is passed to the multivalue parameter.
Shouldn't the above conidition have the effect that no matter how many account numbers there are, the last three digits in the account number will be compared to each element in my multivalue parameter and if there is a match, it will be selected on the report.
For example, in the multivalue dropdown list, there are the following values:
211
212
If I pass 211 to the report, data is returned. If I pass 211, 212 to the multivalue parameter no data is returned.
I have multivalued parameter in my report. I have text box to display heading of the report. the report heading is dependent on the parameter selected.
with single value parameter the text box displays the correct parameter but it cannot with multi valued parameter. Is there any way to display the last value of the parameter in the heading of the report in case of multivalued parameter?
Ex. multivalued parameter is "YEAR"
my report shows the data for 3 years say 2003,2004,2005. report header should show 2005(last of the parameter list) report.
regds,
Hello,
I have in my report a text box that lists the user selection. When the user select a few of the values I display the selection but when the user select "All" I would like the text box to say "Parameter: All".
Is there anyway to know if "All" was selected, I don't want to list all the values because sometime there are too many of them.
Thank you,
Itzhak
I know I can't do this but I dont know will work. any help is much appreciated. the code below in red will always return more than one value, and yes the ?? is actually data (dont ask i didnt do it).
I am basically coding this because of the ?? someone before me thought was a good idea.
inner join MHDDTest.dbo.Admin_tbl_Vendor f on
(case when len(b.vadr) > 0 then
(case when (b.vadr = '??') then
(select vendorNumber from MHDDTest.dbo.Admin_tbl_Vendor
where (substring(afunction,3,2) + object) = '42305' and substring(vendorNumber,1,5) = b.vend)
else
b.vend + '-' + b.vadr
end)
else
b.vend
end
= f.vendorNumber)
Is there an easy way to handle a multivalue parameter where the values could have comma's? I have County and State in a single column and want to select one from the multivalue parameter but when the string is passed it is not being found because I am parsing the parameter on comma. Here is what the drop down list looks like.
Dade,CA
Marion,CA
Brown,CA
Thanks,
vmon
In SQL Server 2005 reporing services, I am using the syntax in the documentation for a multivalue parameter.
AND c.Track IN (@Track)
It works fine when I just select one value, but if I select 2 or more, I get an error about the commas being wrong. Is the syntax correct? Is there a way I can see the SQL generated by the report so I can see what is wrong?
Thanks,
Linda
Hi,
I'm calling a report based on values collected from an ASP.NET page. It worked fine until I tried to pass a multivalue integer value.
ReportParameter seems to take a string[] just fine, but not a int[].
For example...
int[] incidents = prevPage.IncidentIDs;
string[] assets = prevPage.Assets;
ReportParameter[] parameters = new ReportParameter[2];
parameters[0] = new ReportParameter("IncidentID", incidents);
parameters[1] = new ReportParameter("Assets", assets);
throws the error: cannot convert from 'int[]' to 'string'
but changing incidents to a string like so:
string[] incidents = prevPage.IncidentIDs;
string[] assets = prevPage.Assets;
ReportParameter[] parameters = new ReportParameter[2];
parameters[0] = new ReportParameter("IncidentID", incidents);
parameters[1] = new ReportParameter("Assets", assets);
results in "The 'IncidentID' parameter is missing a value"
I've verified that incidents has values.
Any help is appreciated.
Thanks,
Tonya
There is a select all option for each multivalue parameter. If this option is selected, I would like to display in the report that the parameter selected is "ALL" instead of using the Join(parameter!parametername.value,",") to display all the values. Any idea how I check to see if the select all at the beginning is checked?
View 13 Replies View RelatedHi!
I have a table with the following columns:
account_nr, account_totaling_members, account_type
the account_totaling_members column contains a pipe sperated list of accounts in a varchar: "1001|1002|1003"
I need to normalize this so that i get records like:
"10", "1001", "sum"
"10", "1001", "sum"
"10", "1002", "sum"
..and so forth
Does anyone have any idea how to accomplish this?
Everything I have read says that this is possible in Oracle 9 and greater versions, but I can't get it to work...
Here is my query:
select * from employee where employee_id in ('111','222')
This works fine in the data tab until I replace the values with a parameter. I get the pop-up to enter the parameter values but no matter how I enter them, I don't get any rows returned. I've tried entering them as '111','222' and as 111,222 and changing the parameter type from a string to an int, but nothing seems to work.
I am running this on SQL Server RS 2005 and my Oracle driver (Oracle in OraHome92) is version 9.02.
I use "All" as default value in my parameters, my parameters are multivalue.
Now if a user chooses a value it will mark the value but the All will also remain marked. Isn't there a way that it deselects the all when one or more individual values are chosen ?
I thought that the reporting services just didn't have that functionality but someone told me that its possible but i haven't found it anywhere.
Hi all,
I am using stored procedure dataset. i tried filtering the dataset values with the parameter of type datetime.I am able to view and select multiple datetime value from the list. but its not filtering the values.
i changed the parameter datatype to string but it works only for the first value
(parameter. <pname>.value(0)). if i filter with the array value (parameter. <pname>.value) am getting error (Failed to evaluate Filter expression).
I guess the problem with datatype. Pls help me if anyone have idea about this.
HOW set Default Value ="All Values" in parametr with "multivalue" - Report Services
View 2 Replies View Related
Hi,
In my report,I have multivalue parameter for this parameter the Available values are from the Dataset.Suppose the dataset contains Names like this:
'AL - Alabama Center (Tuscaloosa)',
'AL - Regional Control Center (Birmingham)',
'AR - Arkansas & Rock)',
'Arizona Department of Health'
But my problem is the Multivalue parameter TextBox is of fixed size.Now i want the size of the text box to the size of the name which is of length long in the Name.
Whether it is possible or not.
How to achieve this.
The report seems to render just fine if a parameter has just 1 value. However, when I try to pass multi values(comma seperated) to the report from aspx - the report viewer is unable to check the selected values. I have set ShowParameterPrompts to true - for multivalues the parameter selection is blank and hence unless the values are reselected the report wont render.
I tried to loop thru the multi values by dumping it in a array and adding the individual value while iterating thru the RDL's parameter collection. In that case the error message that I get is parameter xyz has been specifed multiple times.
Has any one come across this? How to fix this?
TIA
Hello, I've installed SP1 for SQl Server 2005 and I noticed that the option "Select all" on a multi value parameter drop down (using web browser) is missing. Even if I can see it on VS 2005.....
Anyone can help me?
Thank you very much.
Is it possible to pass multiple values for a report parameter through a url? For example I am using multi-select list in my asp.net page, when I click a button I want to pass the values selected in that list and generate the report on report server with the multi-select list populated with exactly the same values as in asp.net page. So there are essentially two questions: First, how to pass multiple values, second how to populate multi-select in report with these values.
Thanks.
Hi guys,
I'm new in SSRS, Im having problems passing multivalue in stored procedures. Can someone help. please.
Thanks in advance.