I have installed SP2 and have been testing it. I have found an issue with deleting subscriptions thru report manager. I get an error on page:
Line: 1
Char: 58
Error: 'return' statement outside of function
Code: 0
I can delete thru SSMS with no problem.
Is anyone else have an issue with this?
Thanks!
BobP
I have a 3 tier replication with one master server on tier1, 3 servers
on tier 2 and up to 20 remote servers (tier 3) on each of the tier 2
servers. I recently had to delete the subscriptions to each of
the tier 3 servers from the tier 2 servers and then recreate the
subscription. All went well for most of the subscriptions, but
for 3 subscriptions the subscription was dropped at the tier 2 level
but failed to drop at the subscriber due to a time out. I went to
the tier 3 servers in question and issued the sp_removedbreplication
command that supposedly executed properly. On one of these 3
servers everything worked fine and I was able to re-subscribe
successfuly and have everything continue to work properly. On the
other 2 it appeared the re-subscription worked properly until users
began to try to update the database through adds and updates (all
controlled through stored procedures). Users receive an error
message claiming an invalid object name ctsv_ followed by guid looking
string of characters. I suspect it has to do with all of the
stored procedures that were created by merge replication when the
subscription was set up and initialized (no sync). These include
numerous sp_ins_, sp_sel_, and sp_upd_ ... named procedures and a bunch
of dt_ ... stored procedures as well.
How do I clean this up so that I can have users using their database
again and then re-subscribe again short of rebuilding the database (a
very time consuming process)?
Hi
i have to delete the master table data without deleting the child table records,is there any solution for this, parent table has relation with the child table.
regards
vinod.t.v
/****** Object: StoredProcedure [dbo].[dbo.ServiceLog] Script Date: 07/18/2014 14:30:59 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER proc [dbo].[ServiceLogPurge]
-- Purge records dbo.ServiceLog older than 3 months:
-- Purge records in small portions to avoid locking production tables
-- for a long time. The process takes longer, but can co-exist with
-- normal usage of the tables.
[Code] ...
*** Getting this error below when executing the code ***
Msg 102, Level 15, State 1, Procedure ServiceLogPurge, Line 45
Incorrect syntax near 'Failed:'.
It seems to me that if a scheduled SSRS report subscription fails ( Status Message - An error has occurred during report processing) , that I actually need to delete the subscription and reconfigure it from scratch. The scheduled job doesn't try to run again automatically (say the next Monday on a weekly Monday schedule).
Is there a way to "reset" a failed subscription without have to recreate the entire subscription?
Thank you
Devon Kyle
28638
SSCE_M_DUPLICATETABLE
Existing subscription already contains table included in the new subscription.
What are the possible causes of this merge replication error?
Could it be caused by a SQL Server Compact Edition User trying to sync their .sdf file after their subscription has already expired on the SQL Server?
Would you expect to see a different message if a SQL Server Compact Edition user tried to sync a subscriber database (.sdf file) with merge replication if it's been longer than the subscription retention period since their last sync?
Please HELP!!
I need a query to DELETE the first few records in a table. For example: something like .....delete top 1000 from tablename. I figured that TOP dosent work with the DELETE. It only works with SELECT and UPDATE statments.
I cannot hardcode any values in the WHERE clause due to certain constraints in my application.
KINDLY HELP, THIS IS URGENT.
I have edited the aspnet_Users_CreateUser stored procedure so that the UserId that is created when a new user is created is copied to a UserId field in another table. However, when I use the website administration tool to delete users that have been created, it gives me an error saying the delete statement conflicted with the reference constraint. I then added the following code in the aspnet_Users_DeleteUser procedure....
IF ((@TablesToDeleteFrom & 16) <> 0 AND
(EXISTS (SELECT name FROM sysobjects WHERE (name = N'vw_tt') AND (type = 'V'))))
BEGIN
DELETE FROM dbo.userclassset WHERE @UserId = UserId
SELECT @ErrorCode = @@ERROR,
@RowCount = @@ROWCOUNT
IF( @ErrorCode <> 0 )
GOTO Cleanup
IF (@RowCount <> 0)
SELECT @NumTablesDeletedFrom = @NumTablesDeletedFrom + 1 hdhd
END
This code was then added to the function at the end which deletes the data from the aspnet_Users table when everything else has been removed
(@TablesToDeleteFrom & 16) <> 0 AND
Now when I delete a user in the website admin tool, it "deletes" (with no error) the user from the list but doesnt actually physically delete it from the database.
Any ideas?
I have a data source which I created a custom statement for which I need to delete from. I created the folowing selecct statement
SELECT [CompId], [Description], [CompName], [OS], [UserName], [DriverEntryId] FROM [SrcComputer] WHERE ([UserName] = @UserName)
I wrote the following DELETE statement
DELETE FROM SrcComputer WHERE (CompId = @CompId)
I have tested it in SQL server management and it does what I want it to do, but I don't know how to use it in my code. I put it inside of the DELETE tab inside of my custome statement and added a delete button inside of the gridview which utializes my data source, but it's not working. I don't know how to set the CompId variable? I want the statement to delete the row that the user clicks on. Can anyone give me some advice?
I have three tables
1. membership table(aspnet_membership table)
2. User Contacts table
3. Address table
These three table have relation ship with one another through a UserId field.
How will you set up cascaded delete on these tables, Like if I delete a user in the membership table I want the related records in the other tables to be deleted as well. Cascaded delete is it something done through code, or is it definde when the tables are created.
Please advice.
here i a again.. because im really having problems in deleting rows from a gridview... here is my code
SelectCommand="SELECT UserId, First, Last, Email, CreateDate, LastLoginDate, IsApproved, IsLockedOut FROM aspnet_Membership"
DeleteCommand="DELETE FROM aspnet_Membership WHERE [UserId] = @UserId"
ConnectionString="<%$ ConnectionStrings:ConnectionString2 %>" >
<DeleteParameters>
<asp:Parameter Name="UserId" Type="Int32"/>
</DeleteParameters>
It is working but when i click the delete button.. this appears
Must declare the scalar variable "@UserId".
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Must declare the scalar variable "@UserId".Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): Must declare the scalar variable "@UserId".]
System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +95
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +82
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +346
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +3430
System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async) +271
System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) +367
System.Data.SqlClient.SqlCommand.ExecuteNonQuery() +149
System.Web.UI.WebControls.SqlDataSourceView.ExecuteDbCommand(DbCommand command, DataSourceOperation operation) +492
System.Web.UI.WebControls.SqlDataSourceView.ExecuteDelete(IDictionary keys, IDictionary oldValues) +919
System.Web.UI.DataSourceView.Delete(IDictionary keys, IDictionary oldValues, DataSourceViewOperationCallback callback) +176
System.Web.UI.WebControls.GridView.HandleDelete(GridViewRow row, Int32 rowIndex) +911
System.Web.UI.WebControls.GridView.HandleEvent(EventArgs e, Boolean causesValidation, String validationGroup) +1067
System.Web.UI.WebControls.GridView.RaisePostBackEvent(String eventArgument) +214
System.Web.UI.WebControls.GridView.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +31
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +32
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +242
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3839
need help asap.. pls THANK YOU VERY MUCH!!!
Hey Guys,I have Performance Monitor running and storing the network usage to my MsSQL database, and this is done a few times a minute. I have a page that then shows show much of my bandwidth is being used. As you can gather, the database quickly starts filling up with hundrreds of records so I could do with a script that delete these records. I cant simply delete all records because that would cause my webpage to fail so I need a way to delete all records apart from the latest one. Wondering if anyone would know how I could do this?
View 3 Replies View RelatedHi, I am pretty new to SQL and know that I am probably going around this the wrong way.
I want to make a stored proc that deletes rows from table 1 and delete rows from table 2 where the common link is the id.
Any help would be greatly appreciated!
Many thanks
moop
I am new to SQL backups but what I have done is created a script sp_BackupProcessor that is used to determine which backup type is run (Full,Differential,Transaction). I am backing up to the local drive and then our tape backup system backs up the files on our local system to tape. I only want to keep 3 days worth of backups on our local machine since the same information is stored on tape. What is the best way to handle this? Any help or ideas would be appreciated. I have included my script for reference.
Thanks,
Tim
CREATE PROCEDURE sp_BackupProcessor
@Help BIT = 0,
@Database VARCHAR(30) = NULL,
@BackupName VARCHAR(50) = NULL,
@BackupType VARCHAR(4) = NULL,
@Filename VARCHAR(255) = NULL,
@Description VARCHAR(255) = NULL
AS
Parameters:
@Database = ''master''
-- Default = ''master''
-- Specifies the database to backup.
@BackupName = ''masterLOG''
-- Default = ''masterLOG''
-- Specifies a name for the backup.
@BackupType = [''FULL'' | ''DIFF'' | ''LOG''],
-- Default = ''LOG''
-- ''FULL'' = Full database backup
-- ''DIFF'' = Differential database backup
-- ''LOG'' = Transaction Log Backup
@Filename = ''C:empmasterLOG.TRN''
-- Defualt = ''C:empmasterLOG.TRN''
-- Specifies the file to use for the backup.
-- Provide full path and filename.
@Description = ''255 cahr max''
-- Default = ''
-- Specifies a description to attach to the bakup.
Usage:
sp_BackupProcessor
@Database = ''Database'',
@BackupName = ''BackupName'',
@BackupType = [''FULL'' | ''DIFF'' | ''LOG''],
@Filename = ''FullPathLocalFile'',
@Description = ''Backup Description (255 max)''
'
RETURN 1
END
DECLARE @BackupStmt VARCHAR(500)
SELECT @BackupStmt =
CASE @BackupType
WHEN 'FULL' THEN
'BACKUP DATABASE ' + @Database + ' ' +
'TO DISK = ''' + @Filename + ''' ' +
'WITH RETAINDAYS = 2,' +
'INIT' + ', ' +
'NAME = ''' + @BackupName + ''', ' +
'NOSKIP' + ', ' +
'DESCRIPTION = ''' + @Description + ''', ' +
'NOFORMAT'
WHEN 'DIFF' THEN
'BACKUP DATABASE ' + @Database + ' ' +
'TO DISK = ''' + @Filename + ''' ' +
'WITH DIFFERENTIAL' + ', ' +
'NAME = ''' + @BackupName + ''', ' +
'NOSKIP' + ', ' +
'DESCRIPTION = ''' + @Description + ''', ' +
'NOFORMAT'
WHEN 'LOG' THEN
'BACKUP LOG ' + @Database + ' ' +
'TO DISK = ''' + @Filename + ''' ' +
'WITH NOINIT' + ', ' +
'NAME = ''' + @BackupName + ''', ' +
'NOSKIP' + ', ' +
'DESCRIPTION = ''' + @Description + ''', ' +
'NOFORMAT'
END
EXECUTE(@BackupStmt)
GO
Hi,
does anyone out there know how to delete dulicate records in a table? I've looked in BOL and I can't seem to find it. Please advise.
thanks, mark
how do i delete an entire database when it keeps saying that the database is currently in use?
View 3 Replies View Relatedhi,
How can I delete two tables with a WHERE condition.
That is I can't do this -What can be an alternate of this statement -
Delete from Tab1,Tab2,Tab3
where
Tab1.name = Tab2.Name and
Tab2.name = Tab3.name
TIA
How can you delete a log file.
Say I have backed up a transaction log at some drive say G:.
Now I want to delete this log file and want to define it in a job.
What is the syntax -
delete G:Test_log.bak ????
What is a proper syntax??
Thanks!
Does anyone know why it takes a long time (Approx 10 minutes) to delete a DB. I have 2 identical environments for test and prod. I can delete DBs from my test environment quickly but it takes forever to delete a DB from the production environment. I am running SQL2000 SP3a. There are about 25 DBs in the environment with their sized ranging from 100meg to 2 gig. The only differnece in the environments is all test DBs are simple recovery mode and modt prod DBs are full.
Thanks,
Ken
I need to delete duplicate records from a SQL table where only the key field is not a duplicate. I'm not having any luck with my script. Does anyone have a scrip that might work? Thanks
View 2 Replies View RelatedI am trying to drop a device that as no associated file in Windows NT Explorer(.dat) that shows up in my Server Manager Windows
How can I delete them?
Thanks
I have two identical databases. I need to delete the even customer numbers from the first database and the odd numbers from the other database. I know I can do this writing a delete statement for each table. However there are a total of 54 tables.
Does anyone know a faster way to write the script without writing 54 scripts?
I would appreciate your help.
As always you guys are the greatest.
Dianne
i have a table that i think is bad -
how do i delete the table?
also i want to copy this same table from another database -
can i use enterprise manager to copy the same table in place of the deleted table?
Hey all.
I have a table with 100,000 plus records in it, and some are duplicates. Is there any way to delete one of them and not the other. For instance, if I duplicate the table I could run this query.
<cfquery name="query1" datasource="datasource">
DELETE DISTINCT
FROM tablename
WHERE FirstName in ( SELECT FirstName from tablename1 where tablename1.FirstName = tablename.FIRST_NAME AND tablename1.LastName = tablename.LAST_NAME AND tablename1.State = tablename.STATE)
</cfquery>
However, it doesn't work. I know the distinct is not correct. But does anyone know how to achieve this, I have looked all over, and everything I try deletes both records. I was thinking of using some kindof count statement, but it still deletes both of them. Please help. Thanks
I am joining two databases and the result has many duplications in it. Using SQL, how do I delete the duplications.
Thanks
I must admit I dont know all that much about SQL, which is why I hope someone can show me the light. I have a script almost finished, however I have no idea how to have it trim database entries that are older than, say, 90 days. Any ideas?
View 10 Replies View RelatedI have a table with approx 5 million rows and 36 columns. It takes approx
4 minutes to delete 1 row. The table has 3 indexes in addition to it's primary key and has twelve foreign key constraints. We are still using sequel 7.
There is a backup run every night as part of the nightly maintenence that
reorg/reindexes and checks the database integrity. Any thoughts?
Thanks
I have a table with a load of orphaned records (I know... poor design)
I'm trying to get rid of them, but I'm having a brain cramp.
I need to delete all the records from the table "Floor_Stock" that
would be returned by this select statement:
SELECT FLOOR_STOCK.PRODUCT, FLOOR_STOCK.SITE
FROM PRODUCT_MASTER INNER JOIN
FLOOR_STOCK ON PRODUCT_MASTER.PRODUCT =
FLOOR_STOCK.PRODUCT LEFT OUTER JOIN
BOD_HEADER ON FLOOR_STOCK.PRODUCT =
BOD_HEADER.PRODUCT AND FLOOR_STOCK.SITE =
BOD_HEADER.SITE
WHERE (BOD_HEADER.BOD_INDEX IS NULL) AND
(PRODUCT_MASTER.PROD_TYPE IN ('f', 'n', 'k', 'b', 'l', 's'))
I was thinking along the lines of:
DELETE FROM FLOOR_STOCK INNER JOIN
(SELECT FLOOR_STOCK. PRODUCT, FLOOR_STOCK.SITE
FROM PRODUCT_MASTER INNER JOIN
FLOOR_STOCK ON PRODUCT_MASTER. PRODUCT =
FLOOR_STOCK.PRODUCT
LEFT OUTER JOIN BOD_HEADER ON FLOOR_STOCK. PRODUCT =
BOD_HEADER. PRODUCT AND FLOOR_STOCK.SITE = BOD_HEADER.SITE
WHERE (BOD_HEADER.BOD_INDEX IS NULL) AND
(PRODUCT_MASTER.PROD_TYPE IN ('f', 'n', 'k', 'b', 'l', 's'))) F ON
FLOOR_STOCK. PRODUCT = F. PRODUCT
AND FLOOR_STOCK.SITE = F.SITE
... but Sql Server just laughs at me: "Incorrect Syntax near the keyword INNER"
I have a database and I see that I have a lot of TRN files behind it taking up more than 82GB disk space.I have a TRN file from Jan until today. I plan to delete every one of them until April to recover 59 GB of disk space. Would that be OK?
View 4 Replies View RelatedHi All,
Yes, It can be a stupid question but I was trying to understand if it is really impossible!
I have a big table (around 200 millions of records) and I have to delete the old record. I read about the hints and ROWLOCK seems to be perfect. I don't want to have pages locked at all.
However, when I am deleting this table using rowlock I got the following locks
mode - key , type U (Update) and
mode - tab, type X (Exclusive).
I have tried a SELECT on new records but got to wait.
Is there a chance to lock only the records to be deleted?
Thanks a lot,
Felicia Schimidt
How do I delete one record from one table and cascade down all related tables?
Mike B
I have a msde back end for my application.
I also have an Access data file with linked tables to the SQL one.
My app accesses the data through the Access one through ODBC.
I have a data control and when try to delete a record as so:
DataControl.Recordset.Delete
I get a 'ODBC Call Failed' error.
Any ideas why?
The recordset's updateable property is true.
Thanks,
Hello everyone,
I have to delete some rows from three different tables. My tables are:
- VERSION_1
- ID
- VERSION_2
- ID_VERSION FOREIGN KEY
- VERSION_3
- ID_VERSION FOREIGN KEY
The 3 tables are related to each other by the VERSION_1 ID.
what i have to do is deleting first from VERSION_3, then from Version_2 and finally from VERSION_1. This is what i got so far:
DELETE FROM VERSION_3, VERSION_2, VERSION_1 WHERE VERSION_3.ID_VERSION = ? AND VERSION_2.ID_VERSION = ? AND VERSION_1.ID = ?
I cannot make it work, could someone please help me? i am stuck at this.
Thanks in advance