current config: Windows XP SP1, SQL Server 2000
trying to install : SP3a on SQL Server 2000
1. I downloaded the three files of the service pack from
(http://www.microsoft.com/downloads/...&displaylang=en)
..
2. Saved the three files to a same local directory d:sqlsvr3a.
3. Click through each and extracted them to same local directory
d:sql2ksp3
3. when I try to run the d:sql2ksp3setup.bat, it tells me that
x86setupsetupsql.exe is not found. Indeed, the file is not there in
the extracted folders.
Is this a common problem, or am I missing something ?
I have Vista Ultimate and have installed IIS. I downloaded and installed - sucessfully - on a XP Pro (SP2) version, however when I try and install on Vista Ultimate, the installation wizard warns me that IIS is not installed, or running.
I am in the proccess of migrating to Vista and SQL server 2000 is not compatible with Vista. (or so the installation warns me).
I would prefer to use SQL Server 2000 as I know that the data import and export facilities work fine.
When I tried to import data from a remote server, I connected fine, but cannot see how to import a full database and tables to my local server. I need this for my web development as most of the sites I work on use MS SQL Server.
I bought a new HP server with Windows 2003 SBS Premium. I also was told buy the company how installed the server, that they installed all the components of SQL. When another company came to install a new business software for us, they told me that the Integration services is not installed. We tried together to install the SSIS with no luck. When we run the Setup(or used Add/Remove software) we couldn't find the Integration services check box in the list of the setup.
I also asked assistans from the company that i bought the server fromk, and they also couldn't understand where is it.
We have an HP Proliant server, Windows server 2003 small business preminum SP1, SQL server 2005.
I was told that without the SSIS we can't start working with our new software, so this is very urgent for us.
I have been trying to install MSDE for a week. An appraisal program I need to set up uses it. I have been running changes and believe that I am close.
Section of setup log where it fails: MSI (s) (28!C0) [13:16:30:812]: PROPERTY CHANGE: Adding SqlUpgradeProduct property. Its value is '{E09B48B5-E141-427A-AB0C-D3605127224A}'. Failed to find available component set MSI (s) (28!C0) [13:16:30:828]: PROPERTY CHANGE: Modifying SQLExitCode.2D02443E_7002_4C0B_ABC9_EAB2C064397B property. Its current value is '1603'. Its new value: '60007'. Action ended 13:16:30: PickInstanceComponentSet.2D02443E_7002_4C0B_ABC9_E AB2C064397B. Return value 3.
I did not find anything different in a setup on a laptop that works. I'm unsure where to look.
In the add/remove programs are all the programs visible. But when I use "Start -> All programs -> Microsoft SQL Server 2005", there are only 5 configuration tools, no management studio.
What is going wrong?
Where can I find the executable that start up SQL Server 2005?
I installed VS 2005 without SQLExpress. Thereafter, I installed SQL 2005 (not express). Now, when trying to connect to a database server in server explorer, VS can't find any SQL servers and the dropdown box is empty in the Add Connection Wizard.
Also, I would like my WebApplication to run its membership services on the installed SQL - not the implicitly present SQLExpress (which is not present on my machine). How do I tell WebSite Administration Tool to use SQL not SQLExpress!!!!
We have the rtm version of SQL 2000 and have spent the last 2.5 hours trying to apply SP3a. Nothing on the microsoft support site has pointed us to the solution.
Basically, we start the install after shutting down the services, answer all the questions and then when it starts to copy files it fails with an error 'microsoft data access component failed (-1).
Looking in c:winntdatestup.log, the error is unknown. The c:winntsqlsrp.log file is not touched.
We tried renaming the odbcconf.dll file per a microsoft article and no joy.
We also restored mdac_type.exe file per microsoft article and no joy.
Trying to install SP1 and SP2 - same results.
Anyone got any ideas besides it's time to call Microsoft? :confused:
SQL Server 2000 Original Release 8.00.194 RTM Database Components SP1 or Desktop Engine SP1 8.00.384 SP1 Database Components SP2 or Desktop Engine SP2 8.00.534 SP2 Database Components SP3 or SP3a, or Desktop Engine SP3 or SP3a 8.00.760 SP3
This would imply that after installing sp3a and restarting, the version reported should now be 8.00.760. However, it still shows 8.00.194. So it appears to have not really installed, althought the sp3a installation ran without incident. So, how can I get the sp3a to not just act like it installed, but actually get it to install? Also, I have shut down all mssql services and rebooted, applied patch, and rebooted again. Doesn't help. Also, if it is really installing, is there another way to tell?
Anyway, I really need to be able to install sp3a to see if it fixes another problem I'm having. Unfortunetly, since I can't even tell if the sp3a is installing, I can't tell if it really doesn't help or not. Thanks.
I really don't understand this, in an attempt to upgrade/install SP3a, I download the file sql2kdesksp3.exe, which from the documentation, you can either use for upgrading or new installs. I run a new install; in the new instance, I execute "select @@version" and get "Service Pack 1"??
Our environment is currently running on SQL 2000 sp3a (win2003) and I'm having an issue with 'max worker threads', so I opened a ticket with Microsoft. They tell me that SP3a is no longer support and I have to upgrade all our servers to SP4.
We had an issue in my previous company and I was told by a consultant that I shouldn't install SP4 because it caused a lot of issues. I'm aware of the 'AWE enabled' issue, are there any others I should watch out for?
Hi, I've downloaded the SP3a for sql server from the microsoft website. I unpackaged the files into a folder and ran the file setup.bat. I recieved an error that setupsql.exe file was not found. I think theres a folder missing called Setup under the X86 folder. Is there a way I can fix this????????
Now that support for SQL SP3a has been removed, how does this affect MSDE installations? We've got lots of products installed that have come with MSDE backends, all on SP3a. Is it up to the individual vendors as to whether they continue to support on this version? Backup Exec and Insight Manager are 2 that spring to mind.
Hi, I'm trying to upgrade MSDE with SP4. I used the following in command prompt. setup /upgradesp sqlrun INSTANCENAME=MSDEINSTANCE SECURITYMODE=SQL UPGRADEUSER=username UPGRADEPWD=userpassword /L*v C:MSDELog.log i got the message "Please go the control panel to install and configure system components." What does it mean? How to upgrade it?I have tried to edit the line with *V, and using the sa username and password, but i get the same message. RegardsKenneth Davidsen
I just downloaded and installed MSDE2000 sp3a for winform and asp.net quickstart tutorial. But I found it has no sample database such as pubs and northwind. It used to have these databases. At least in last September when .Net web Matrix came out.
If this is the case, can someone tell me where to get the sql scripts to create Northwind database in MSDE? Becasue the winform tutorial uses this database.
I just upgraded my desktop engine MSDE 1.0 to MSDE 2000 SP3a. Everything seemed to go well, MSSQLSERVER AND SQLSERVER Agent Services are running, problem is, I can no longer see the particular instance on the network from Enterprise Manager.
The installation instructions specified that if the Instance was to accept connections from applications on other computers not to specify the DISABLENETWORKPROTOCOLS parameter, so I didn't.
I'm a little green with this, can anyone suggest a place to start troubleshooting?
I urgently need tom use SP3a upgrade the instance of SQLServer200MSDE runing on my local machine but I am having problems in doing so.My first problem is that when I start the set up procedure I get themessage"A strong SA password is required for security reasons. Please useSAPWD switch to supply the same"Currently the sa password isAbc/def/ghk1Which I think is a 'strong password' according to the microsoft rulesathttp://www.microsoft.com/resources/...sword_tips.mspxI would be grateful if someone could confirm that Abc/def/ghk1 is astrong password.If anyone could point me to some published informal help on installingSP3a then that would also be very helpful (I do of course have the MSread me file). If anyone has a sample command line entry for theupdating then I would find that extremely useful. There is oneinstance of MSDE on my machine, named NetSDK.Best wishes, John Morgan
A Win2k, SQL2k machine with SP2 that only just now has been updated to SP3afails in different ways. Among other things, when I now start EnterpriseManager, I get a message saying "rebbrui.rll" is missing and the snap-infails to initiate. But then the Manager starts anyway.But the SQL application does not work. I searched around the net, and Ifound that it looks as if SQL Slammer has been on the server. I can tell bythe similar symptoms other users have had, allthough I am not sure. Anyway,when I run some online virusscans and the Symantec SQLexp-tool to removeSlammer, I am told that the system is virusfree. Is that because SP3a toSQL2000 automatically got rid of the virus (if any)?But how do I get the SQL to run without any errors again?The server also runs in Terminal Application Mode.Regards, Lars.
Hi(sorry this has turned into a bit of an epic...thought I'd as theexperts!)SQL 2k, sp3a. Dual xeon 2.4. 2 gig ram. everything on a 3 disk raid 5.Microsoft SQL Server 2000 - 8.00.760 (Intel X86)Enterprise Edition on Windows NT 5.0 (Build 2195: )Problem seems to be some extended procs that seemed to be running fineon a 'vanilla' install on a different server now seem to be failing.Failures occuring c 6 - 10 hours.Sometimes the failure logs as the xp failure with severity 20 that Ikindof expect :s. other times absolutely nothing is logged.There are a variety of error messages - or sometimes nothing at all.http://www.mapinfo.com/common/docs/.../SWMSS48_RN.pdfdescribes one of our issues, which seems to come out on the restartafter a failure:Error event id is 19011, Message "SuperSocket info:ConnectionListen(Shared-Memory (LPC)) : Error 5."That site suggests:[color=blue]>Workaround>Suggested solutions include:>• Obtain a hotfix from Microsoft (http://www.microsoft.com). You will[/color]need to >cite the 94302[color=blue]>reference number.>• Turn off shared memory in the client network configuration utility[/color]to >disable shared[color=blue]>memory.>• Replace the SQL Server SSMSLPCN.DLL with the SSMSLPCN.DLL[/color](8.00.540) from >SQL[color=blue]>Server 2000 Service Pack 2.[/color]- but I cant find any sensible information which describes this tocorrelate! Searching MS for that number (94302) came up with zip.The dll version we are running is 2000.80.760.0, although earlierversions are elsewhere on the server (disk images).Interesting to note that we seem to be able to replicate the 'leakage'of improperly closed handles on this version, but not on the oldserver runningthat dll version 2000.80.194.0. This I understood to have been fixedin sp3.On one failure we caught the following (involving our extended procs):2004-02-15 15:03:31.40 spid58 Error: 0, Severity: 20, State: 02004-02-15 15:03:31.40 spid58 Stored function'xp_Contest_CalculateScores' in the library 'e:sqlxpga_procs.dll'generated an access violation. SQL Server is terminating process 58..2004-02-15 15:04:32.14 spid64 Error: 0, Severity: 20, State: 02004-02-15 15:04:32.14 spid64 Stored function 'xp_XML_GetSubTree'in the library 'e:sqlxpga_procs.dll' generated an access violation.SQL Server is terminating process 64..2004-02-15 15:04:48.48 spid53 Using 'dbghelp.dll' version '4.0.5'*Dump thread - spid = 53, PSS = 0x472d7200, EC = 0x725fc098*Stack Dump being sent to e:sqlMSSQLlogSQLDump0001.txt* ************************************************** ******************************* BEGIN STACK DUMP:* 02/15/04 15:04:48 spid 53This was followed about a minute later by:2004-02-15 15:04:55.75 spid53 Stack Signature for the dump is0x1CC032652004-02-15 15:04:55.75 spid53 SQL Server Assertion: File:<recbase.cpp>, line=1378Failed Assertion = 'm_offBeginVar < m_SizeRec'.2004-02-15 15:04:55.89 spid53 Using 'dbghelp.dll' version '4.0.5'*Stack Dump being sent to e:sqlMSSQLlogSQLDump0002.txt2004-02-15 15:04:56.01 spid53 SqlDumpExceptionHandler: Process 2292generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQLServer is terminating this process.* ************************************************** ******************************* BEGIN STACK DUMP:* 02/15/04 15:04:55 spid 53As a side issue we have a number of 'initialisation of notify failed'notes.Any one have any clue about this?Might the DLL need rolling back?Is sp3a knacked for extended procs?Is there some daft setting I've missed :/Any good events to track in particular?Cheers all!
I have a DTS package that is importing a fixed length file.After installing SP3a (on PERSONAL & DEVELOPER edition) it will notallow me to assign more than 125 fixed length column positions.After hitting the Finish & OK button it just wipes out the columnsettings.I've reinstalled both Personal & Developer edition. DTS will allowmore than 125 prior to the service pack.
I got this message from Backup Exec for Windows Servers Environment Check 1.0 for SBS1 QUOTE
An instance of Microsoft SQL 2000 was found that is not updated to Service Pack 3a.
An instance of Microsoft SQL Server was found that is not updated to the correct service pack. Using this SQL Server instance with Backup Exec may cause errors. To install Backup Exec successfully, upgrade this SQL Server to Service Pack 3a, or select another instance.
Recently when i try to upgrade my current MSDE 2000 (SP3a) to SP4, the system just keep on failing me. Here is the scenario:
1. Download the MSDE2000 SP4 from microsoft
2. Extract the SP4
3. Run the following command in either the command prompt or via a batch file:
echo off echo "Start to Upgrade MSDE SP4 ... " setup.exe /UPGRADESP SQLRUN INSTANCENAME=JSNG SECURITYMODE=SQL UPGRADEUSER=sa UPGRADEPWD=Th3B3st /L*v c:MSDE_Log.log echo "SP4 Upgrade Process completed!"
4. Once the above batch file was runned, the standard SQL configuration screen (gathering information) will be triggered.
5. However after a while the installation will just stopped.
6. When i checked on the log, i have found out that the failure of installation is due to the system has failed to configure the server. PFB for the last few rows of the verbose log:
I am getting an error when installing SP3a of MSDE. I get the error message "The instance name specified is invalid." This is the first SQL database installed, so there is no instance name. I have tried "default" and "MSSQLSERVER" as instance names without success.
Server : w2k server sp4 Tablet : w2k sp4 Sql Server 2000
A few days ago we upgraded our servers and tablet pc's with sql server sp3a. At the same time we also changed the publisher and it now uses a static filter to reduce the number of records in the tablet database. Since we have done this we have been getting an error message when we try to synchronize via the windows synchronization manager on our tablet pc's. The error message is "mobsync.exe has generated errors and will be closed by windows. You will need to restart the program. I looked up the error message and it is a stack overflow. This does not happen every time but about 50% of the time. We can always sync from within enterprise manager and everything works fine every time.
If any one has any ideas I would greatly appreciate it and thank you in advance.
Can anyone give me some sugguestions here.Connection is declared at the start of the applicationSet rsFZReport.ActiveConnection = connThen a function repeatly opens recordsets like this -rsFZReport.Open sRS, , adOpenStatic, adLockReadOnly, adCmdText....reporting code etc...If rsFZReport.State > 0 ThenrsFZReport.CloseSet rsFZReport= NothingendifUsing VB Watch debugger, the close and set nothing do NOT release anymemory. It just keeps increasing. The application connects to multipledatabases and many tables, so its uses about 10Mb/minute.(I don't think its of relavance but Form.show uses memory but form.unloaddoesn't release any back)I've installed SP3a and MDAC 2.8 to no avail. Anyone have any ideas or knowwhat I can do?msado27.tlb 2.80.1022.0MSSQL Server SP3a (3 has a memory leak apparently)VB6, SP6Sqlsrv32.dll caused a leak on NT4 SP6, but upgrading it on my win2k SP4server/workstation (they are both and the same) to thisSqlsrv32.dll 2000.85.1022.0doesn't help.Provider=SQLOLEDB;Data Source=theServer;Initial Catalog=theDB;UserID=uid;Password=thepwd;OPTION=3;connect timeout=240;
Hi,I'm trying to install MSDE Desktop SP3a SQL server on my Windows 2000 Professional Laptop.Every time I try it nearly finishes the installation and then just rollsback.Can anyone help? Is this a known issue?Thanks in advance,Jocky
Used to work fine: (windows 200 server, sql server 2000, JDBC driver SP2.) Two java processes, one sending messages (using jdbc and sql as temp storage), second is receiving and placing on msmq.
After installing SP3a for SQL server, under high load (200 a sec) there are missing messages in msmq. Installed everything from scratch on separate machine, works fine until SP3a is applied. Any help is highly appreciated
Here's my situation:I have an ODBC DSN setup for Timberline Data (An accounting packagethat uses pervasive.sql) on my sql box. I set up a linked server usingthe supplied timberline odbc driver. I have two sql instances setup,the default instance and a named instance. On the default instance,the linked server works great no matter who is logged in using it (allauthentication is NT integrated). However on the named instance onlythe NT account that the MSSqlserver$NAMED service is logged in undercan utilize the linked server. All others get a ODBC error:"error 7399: OLE DB Provider 'MSDASQL' reported an error. AccessDenied. OLE DB error trace [OLE/DB Provider 'MSDASQL'IUnknown::QueryInterface returned 0x80070005: Access Denied.]."Far as i can tell, both instances are setup the same, except that oneis the default and one is a named instance.Why the different results for the default instance vs a named instance.Any ideas?Thanks
The 6:th of march Sql server data tools for Visual Studio 2012 was released.
[URL]
I seem to be unable to install this using the link provided on the blog page. I'm getting a "Same architecture installation" error. Running on the machine is Visual Studio 2012 Premium & Sql Server 2012 (64bit).
