SP5a - Cusor Skipping Records On Temp Table
Dec 14, 1999
Hello,
Just in case anybody has had this problem after applying service pack 5a.
a stored procedure that sets serial numbers on records on a temporary table is skipping every other record.
I ran the code manually on isql and could not replicate the error, however when re-compiled on stored procedure it fails misserably.
when is Microsoft going to release a service pack that actually works?
Did you know that Executive does not recognize 2000 as a leap year?
If anybody has any suggestions on this problem, besides the obvious (using a real table) please write back
thanks.
David E. Pierri
Pseudo data-admin
ACNY
View 1 Replies
ADVERTISEMENT
Aug 27, 2012
skip locked records in a MERGE statement and output the list of skipped records.
Through the documentation, internet posts and testing, I believe it is NOT possible. MERGE acts like a single atomic DML statement, and therefore cannot avoid locked records.
I can use the READPAST hint, which will skip the row-locked records. However, it could actually insert duplicate keys in certain cases (as it is ignoring records, i would guess), which would not be acceptable.
View 1 Replies
View Related
Nov 23, 2004
PLease help me with a intruiging problem with Stored Procedure, which is driving me mad.......
I wrote a Stored Procedure as listed below.
I've included the options
SET NOCOUNT ON
SET QUOTED_IDENTIFIER OFF
the results are stored in a #Temp table
The SP executes fine on Query Analyzer, and shows the contents of the temp table. BUt when I run this SP using ASP, I got the following error
-----------
ADODB.Recordset (0x800A0E78)
Operation is not allowed when the object is closed.
/test_site/test.asp, line 59
------------
I've tried using Recordset.MoveNextRecordset, if at all there are more than one recordset, obviously I got the same error
CREATE PROCEDURE atul_med.[sp_rep_sale2]
(
@rep_in varchar(100)
)
AS
SET NOCOUNT ON
SET QUOTED_IDENTIFIER OFF
DECLARE
@REP int,
@temp_pack varchar(20),
@temp_ntp int,
@temp_party_code varchar(20),
@temp_party_name varchar(20),
@temp_prod_code varchar(20),
@temp_prod_desc varchar(20),
@tot_qty int,
@tot_amount int,
@iCnt int,
@tot_sale_qty int,
@net_tot_sale_qty int,
@TableName varchar(10)
select @REP= @rep_in
set @tot_sale_qty=0
set @net_tot_sale_qty=0
set @TableName='#Test2'
--select @TableName='Test'
set @page=1
set @RecsPerPage=100
Declare @SQL VarChar(1000),
@cnt int,
@iCurLine int, @SQLX VarChar(1000)
set @iCurLine=1
set @iCurLine=1
select @Cnt = (SELECT count(*) FROM VW_PART_REP WHERE (REP = @REP))
print "Nos Of Party :"+ convert(char(1),@iCnt)
Create Table #Test2 (ID int identity,prod_desc nvarchar(100),pack nvarchar(100),ntp int)-- ,tot_qty int ,tot_amt int )
while @iCurLine <= @cnt
begin
SELECT @SQL= "ALTER TABLE #Test2 ADD "
SELECT @SQL = @SQL + "party_qty"+convert(char(2),@iCurLine)+" int "
set @iCurLine=@iCurLine+1
Exec (@SQL)
print @sql
end
SELECT @SQL= "ALTER TABLE #Test2 ADD "
SELECT @SQL = @SQL +"tot_qty int , tot_amt int "
SELECT @SQL = @SQL
exec (@SQL)
print @SQL
select * from #Test2
--Create Table #Test1 (ID int identity,prod_desc nvarchar(100),pack nvarchar(100),ntp int,party_qty1 int ,party_qty2 int ,party_qty3 int ,party_qty4 int ,party_qty5 int ,tot_qty int ,tot_amt int )
set @iCurLine=1
--=============================================
--print '=================Product Name========================'
DECLARE PROD_CUR CURSOR FOR
SELECT distinct(prod_code) as prod_code,prod_desc,pack,ntp FROM VW_sales_sum
WHERE (REP = @REP)
group by prod_code,prod_desc,pack,ntp
Declare @SQL_ins VarChar(1000)
OPEN PROD_CUR
FETCH NEXT FROM PROD_CUR
INTO @temp_prod_code,@temp_prod_desc,@temp_pack,@temp_n tp
WHILE @@FETCH_STATUS = 0
BEGIN
--Print @temp_prod_desc+'-'+convert(varchar(10),@temp_pack)+'-'+convert(varchar(10),@temp_ntp)
--print '=================prod_code :'+convert(varchar(10),@temp_prod_code)+'========= ==============='
print "============Insert Statement============"
SET @SQL_ins = "Insert into "+@TableName+" values("
SET @SQL_ins = @SQL_ins +""""+ @temp_prod_desc+""","""+@temp_pack+""","""+convert(char(10),@temp_ntp)+""","
DECLARE Party_CUR1 CURSOR FOR
SELECT party_code,party_name FROM VW_PART_REP
WHERE (REP = @REP) group by party_code,party_name
DECLARE @SQL1 varchar(10),@SQL2 varchar(100)
set @SQL2=''
OPEN Party_CUR1
FETCH NEXT FROM Party_CUR1
INTO @temp_party_code,@temp_party_name
WHILE @@FETCH_STATUS = 0
BEGIN
print "==Party_name :"+ @temp_party_name +"===Party_Code :"+convert(char(3),@temp_party_Code)
set @tot_sale_qty=0
set @tot_sale_qty= (select sum(issuedqty)as tot_qty from vw_sales_sum
where party_code =@temp_party_code
and (REP = @REP)
and (prod_code=@temp_prod_code))
if @tot_sale_qty IS NULL
begin
set @tot_sale_qty=0
print "===Tot Qty :"+convert(varchar(10),@tot_sale_qty)
end
else
begin
print "===Tot Qty :"+convert(varchar(10),@tot_sale_qty)
end
SELECT @SQL1 = @tot_sale_qty
select@net_tot_sale_qty=@net_tot_sale_qty+@tot_sale_qty
--print @SQL1
Select @SQL2 = @SQL2 + @SQL1 +","
FETCH NEXT FROM Party_CUR1
INTO @temp_party_code,@temp_party_name
END
CLOSE Party_CUR1
DEALLOCATE Party_CUR1
print '==============================='
print @SQL2+convert(char(4),@net_tot_sale_qty)
--set @net_tot_sale_qty=@tot_sale_qty+@net_tot_sale_qty
--SET @SQL = @SQL+convert(char(10),@tot_sale_qty)+','
--set @tot_sale_qty=0
Select @SQL_ins = @SQL_ins+@SQL2+convert(char(8),@net_tot_sale_qty)
Select @SQL_ins = @SQL_ins+","
Select @SQL_ins = @SQL_ins+convert(char(12),(@net_tot_sale_qty*@temp _ntp))
Select @SQL_ins = @SQL_ins+")"
print @SQL_ins
Exec (@SQL_ins)
select@net_tot_sale_qty=0
FETCH NEXT FROM PROD_CUR
INTO @temp_prod_code,@temp_prod_desc,@temp_pack,@temp_n tp
END
CLOSE PROD_CUR
DEALLOCATE PROD_CUR
SELECT * FROM #Test2
SET NOCOUNT OFF
GO
SET QUOTED_IDENTIFIER ON
GO
View 8 Replies
View Related
Mar 25, 2014
I use code below to insert data into a temp table.
How many records can insert into a temp table?
Select * into #temp from ORDER
View 3 Replies
View Related
Sep 23, 2014
I come from a web based world were loading 1.5 million records into a temp table is suicide. I’m doing more data warehouse stuff now and I was looking into optimizing a buddies proc and noticed he was loading 1.5 million records into a temp table. We had a discussion about it because being from a web world I was drastically against it. He on the other hand didn’t feel it was an issue being it gets called once maybe twice a day. The tempdb is set to autogrow and it is on a different drive than all the other databases on the box. It has one ldf and mdf. He’s creating an index on the table after load. Why we shouldn’t be loading 1.5 million recs into temp table?
View 5 Replies
View Related
Jun 19, 2008
Hi all
I'm new to sql and could do with some help resolving this issue.
My problem is as follows,
I have two tables a BomHeaders table and a BomComponents table which consists of all the components of the boms in the BomHeaders table.
The structure of BOMs means that BOMs reference BOMs within themselves and can potentially go down many levels:
In a simple form it would look like this:
LevelRef: BomA
1component A
1component B
1Bom D
1component C
What i would like to do is potentially create a temporary table which uses the BomReference as a parameter and will loop through the records and bring me back every component from every level
Which would in its simplest form look something like this
LevelRef: BomA
1......component A
1......component B
1......Bom D
2.........Component A
2.........Component C
2.........Bom C
3............Component F
3............Component Z
1......component C
I would like to report against this table on a regular basis for specific BomReferences and although I know some basic SQL this is a little more than at this point in time i'm capable of so any help or advice on the best method of tackling this problem would be greatly appreciated.
also i've created a bit of a diagram just in case my ideas weren't conveyed accurately.
Bill Shankley
View 4 Replies
View Related
Apr 9, 2014
Below are my temp tables
--DROP TABLE #Base_Resource, #Resource, #Resource_Trans;
SELECT data.*
INTO #Base_Resource
FROM (
SELECT '11A','Samsung' UNION ALL
[Code] ....
I want to loop through the data from #Base_Resource and do the follwing logic.
1. get the Resourcekey from #Base_Resource and insert into #Resource table
2. Get the SCOPE_IDENTITY(),value and insert into to
#Resource_Trans table's column(StringId,value)
I am able to do this using while loop. Is there any way to avoid the while loop to make this work?
View 2 Replies
View Related
Jun 24, 1999
I think this is a very simple question, however, I don't know the
answer. What is the difference between a regular Temp table
and a Global Temp table? I need to create a temp table within
an sp that all users will use. I want the table recreated each
time someone accesses the sp, though, because some of the
same info may need to be inserted and I don't want any PK errors.
thanks!!
Toni Eibner
View 2 Replies
View Related
Sep 13, 2006
Ok, I'm really new at this, but I am looking for a way to automatically insert new records into tables. I have one primary table with a primary key id that is automatically generated on insert and 3 other tables that have foreign keys pointing to the primary key. Is there a way to automatically create new records in the foreign tables that will have the new id? Would this be a job for a trigger, stored procedure? I admit I haven't studied up on those yet--I am learning things as I need them. Thanks.
View 4 Replies
View Related
Aug 11, 2015
Table1 contains fields Groupid, UserName,Category, Dimension
Table2 contains fields Group, Name,Category, Dimension (Group and Name are not in Table1)
So basically I need to read the records in Table1 using Groupid and each time there is a Groupid then select records from Table2 where Table2.Category in (Select Catergory from Table1)
and Table2.Dimension in (Select Dimension from Table1)
In Table1 There might be 10 Groupid records all of which are different.
View 9 Replies
View Related
Oct 21, 2015
I am trying to write a query that will retrieve all students of a particular class and also any rows in HomeworkLogLine if they exist (but return null if there is no row). I thought this should be a relatively simple LEFT join but I've tried every possible combination of joins but it's not working.
SELECT
Student.StudentSurname + ', ' + Student.StudentForename AS Fullname,
HomeworkLogLine.HomeworkLogLineTimestamp,
HomeworkLog.HomeworkLogDescription,
ROW_NUMBER() OVER (PARTITION BY HomeworkLogLine.HomeworkLogLineStudentID ORDER BY
[Code] ...
It's only returning two rows (the students where they have a row in the HomeworkLogLine table).
View 3 Replies
View Related
Feb 11, 2015
i am inserting something into the temp table even without creating it before. But this does not give any compilation error. Only when I want to execute the stored procedure I get the error message that there is an invalid temp table. Should this not result in a compilation error rather during the execution time.?
--create the procedure and insert into the temp table without creating it.
--no compilation error.
CREATE PROC testTemp
AS
BEGIN
INSERT INTO #tmp(dt)
SELECT GETDATE()
END
only on calling the proc does this give an execution error
View 3 Replies
View Related
Jul 19, 2012
I don't know if it's a local issue but I can't use temp table or table variable in a PP query (so not in a stored procedure).
Environment: W7 enterprise desktop 32 + Office 2012 32 + PowerPivot 2012 32
Simple example:
declare @tTable(col1 int)
insert into @tTable(col1) values (1)
select * from @tTable
Works perfectly in SQL Server Management Studio and the database connection is OK to as I may generate PP table using complex (or simple) queries without difficulty.
But when trying to get this same result in a PP table I get an error, idem when replacing table variable by a temporary table.
Message: OLE DB or ODBC error. .... The current operation was cancelled because another operation the the transaction failed.
View 11 Replies
View Related
Jul 20, 2005
Hi thereApplication : Access v2K/SQL 2KJest : Using sproc to append records into SQL tableJest sproc :1.Can have more than 1 record - so using ';' to separate each linefrom each other.2.Example of data'HARLEY.I',03004,'A000-AA00',2003-08-29,0,0,7.5,7.5,7.5,7.5,7.0,'Notes','General',1,2,3 ;'HARLEY.I',03004,'A000-AA00',2003-08-29,0,0,7.5,7.5,7.5,7.5,7.0,'Notes','General',1,2,3 ;3.Problem - gets to lineBEGIN TRAN <---------- skipsrestINSERT INTO timesheet.dbo.table14.Checked permissions for table + sproc - okWhat am I doing wrong ?Any comments most helpful......CREATE PROCEDURE [dbo].[procTimesheetInsert_Testing](@TimesheetDetails varchar(5000) = NULL,@RetCode int = NULL OUTPUT,@RetMsg varchar(100) = NULL OUTPUT,@TimesheetID int = NULL OUTPUT)WITH RECOMPILEASSET NOCOUNT ONDECLARE @SQLBase varchar(8000), @SQLBase1 varchar(8000)DECLARE @SQLComplete varchar(8000) ,@SQLComplete1 varchar(8000)DECLARE @TimesheetCount int, @TimesheetCount1 intDECLARE @TS_LastEdit smalldatetimeDECLARE @Last_Editby smalldatetimeDECLARE @User_Confirm bitDECLARE @User_Confirm_Date smalldatetimeDECLARE @DetailCount intDECLARE @Error int/* Validate input parameters. Assume success. */SELECT @RetCode = 1, @RetMsg = ''IF @TimesheetDetails IS NULLSELECT @RetCode = 0,@RetMsg = @RetMsg +'Timesheet line item(s) required.' + CHAR(13) + CHAR(10)/* Create a temp table parse out each Timesheet detail from inputparameter string,count number of detail records and create SQL statement toinsert detail records into the temp table. */CREATE TABLE #tmpTimesheetDetails(RE_Code varchar(50),PR_Code varchar(50),AC_Code varchar(50),WE_Date smalldatetime,SAT REAL DEFAULT 0,SUN REAL DEFAULT 0,MON REAL DEFAULT 0,TUE REAL DEFAULT 0,WED REAL DEFAULT 0,THU REAL DEFAULT 0,FRI REAL DEFAULT 0,Notes varchar(255),General varchar(50),PO_Number REAL,WWL_Number REAL,CN_Number REAL)SELECT @SQLBase ='INSERT INTO#tmpTimesheetDetails(RE_Code,PR_Code,AC_Code,WE_Da te,SAT,SUN,MON,TUE,WED,THU,FRI,Notes,General,PO_Nu mber,WWL_Number,CN_Number)VALUES ( 'SELECT @TimesheetCount=0WHILE LEN( @TimesheetDetails) > 1BEGINSELECT @SQLComplete = @SQLBase + LEFT( @TimesheetDetails,Charindex(';', @TimesheetDetails) -1) + ')'EXEC(@SQLComplete)SELECT @TimesheetCount = @TimesheetCount + 1SELECT @TimesheetDetails = RIGHT( @TimesheetDetails, Len(@TimesheetDetails)-Charindex(';', @TimesheetDetails))ENDIF (SELECT Count(*) FROM #tmpTimesheetDetails) <> @TimesheetCountSELECT @RetCode = 0, @RetMsg = @RetMsg + 'Timesheet Detailscouldn''t be saved.' + CHAR(13) + CHAR(10)-- If validation failed, exit procIF @RetCode = 0RETURN-- If validation ok, continueSELECT @RetMsg = @RetMsg + 'Timesheet Details ok.' + CHAR(13) +CHAR(10)/* RETURN*/-- Start transaction by inserting into Timesheet tableBEGIN TRANINSERT INTO timesheet.dbo.table1select RE_Code,PR_Code,AC_Code,WE_Date,SAT,SUN,MON,TUE,WE D,THU,FRI,Notes,General,PO_Number,WWL_Number,CN_Nu mberFROM #tmpTimesheetDetails-- Check if insert succeeded. If so, get ID.IF @@ROWCOUNT = 1SELECT @TimesheetID = @@IDENTITYELSESELECT @TimesheetID = 0,@RetCode = 0,@RetMsg = 'Insertion of new Timesheet failed.'-- If order is not inserted, rollback and exitIF @RetCode = 0BEGINROLLBACK TRAN-- RETURNEND--RETURNSELECT @Error =@@errorprint ''print "The value of @error is " + convert (varchar, @error)returnGO
View 2 Replies
View Related
Sep 23, 2015
If on the source I have a new column, the script generated by SqlPackage.exe recreates the table on the background with moving the data into a temp storage. If the table is big, such approach can cause issues.
Example of the script is below: in the source project I added columns [MyColumn_LINE_1] and [MyColumn_LINE_5].
Is there any way I can make it generating an alter statement instead?
BEGIN TRANSACTION;
SET TRANSACTION ISOLATION LEVEL SERIALIZABLE;
SET XACT_ABORT ON;
CREATE TABLE [dbo].[tmp_ms_xx_MyTable] (
[MyColumn_TYPE_CODE] CHAR (3) NOT NULL,
[Code] ....
The same script is generated regardless the table having data or not, having a clustered or nonclustered PK.
View 7 Replies
View Related
Oct 25, 2015
I have a temp table like this
CREATE TABLE #Temp
(
ID int,
Source varchar(50),
Date datetime,
CID varchar(50),
Segments int,
Air_Date datetime,
[code]....
Getting Error
Msg 102, Level 15, State 1, Procedure PublishToDestination, Line 34 Incorrect syntax near 'd'.
View 4 Replies
View Related
Jun 6, 2005
Hello,
I am receiving the following error:
Column name or number of supplied values does not match table definition
I am trying to insert values into a temp table, using values from the table I copied the structure from, like this:
SELECT TOP 1 * INTO #tbl_User_Temp FROM tbl_User
TRUNCATE TABLE #tbl_User_Temp
INSERT INTO #tbl_User_Temp EXECUTE UserPersist_GetUserByCriteria @Gender = 'Male', @Culture = 'en-GB'
The SP UserPersist_GetByCriteria does a
"SELECT * FROM tbl_User WHERE gender = @Gender AND culture = @Culture",
so why am I receiving this error when both tables have the same
structure?
The error is being reported as coming from UserPersist_GetByCriteria on the "SELECT * FROM tbl_User" line.
Thanks,
Greg.
View 2 Replies
View Related
Aug 14, 2015
Below is my table structure. And I am inserting data from other temp table.
CREATE TABLE #revf (
[Cusip] [VARCHAR](50) NULL, [sponfID] [VARCHAR](max) NULL, GroupSeries [VARCHAR](max) NULL, [tran] [VARCHAR](max) NULL, [AddDate] [VARCHAR](max) NULL, [SetDate] [VARCHAR](max) NULL, [PoolNumber] [VARCHAR](max) NULL, [Aggregate] [VARCHAR](max) NULL, [Price] [VARCHAR](max) NULL, [NetAmount] [VARCHAR](max) NULL,
[Code] ....
Now in a next step I am deleting the records from #revf table. Please see the delete code below
DELETE
FROM #revf
WHERE fi_gnmaid IN (
SELECT DISTINCT r2.fi_gnmaid
FROM #revf r1, #revf r2
[Code] ...
I don't want to create this #rev table so that i can avoid the delete statement. But data should not affect. Can i rewrite the above as below:
SELECT [Cusip], [sponfID], GroupSeries, [tran], [AddDate], [SetDate], [PoolNumber], [Aggregate], [Price], [NetAmount], [Interest],
[Coupon], [TradeDate], [ReversalDate], [Description], [ImportDate], MAX([fi_gnmaid]) AS Fi_GNMAID, accounttype, [IgnoreFlag], [IgnoreReason], IncludeReversals, DatasetID, [DeloitteTaxComments], [ReconciliationID],
[Code] ....
If my above statement is wrong . Where i can improve here? And actually i am getting 4 rows difference.
View 5 Replies
View Related
Sep 8, 2006
Hello
Is it possible to insert data into a temp table with data returned from a stored procedure joined with data from another table?
insert #MyTempTable
exec [dbo].[MyStoredProcedure] @Par1, @Par2, @Par3
JOIN dbo.OtherTable...
I'm missing something before the JOIN command. The temp table needs to know which fields need be updated.
I just can't figure it out
Many Thanks!
Worf
View 2 Replies
View Related
Sep 17, 2007
In a table-valued UDF, does the UDF use a table variable or a temp table to form the resultset returned?
View 1 Replies
View Related
Nov 23, 2007
Hello guys..
Can u plz help me by giving me an idea how i can copy the temp table data to permanent table
Thanks,
sohails
View 1 Replies
View Related
Jan 23, 2008
Hi!
What is the difference in performance if I use a Temp-table or a local-table variable in a storedprocedure?
Why?
//Daniel
View 5 Replies
View Related
Oct 5, 2015
I want to insert the data from temp table to other table. Only condition is, it needs to sorted based on tool number and tool date. For example if we have ten records for tool number 1000, it should be order by tool number and then based on tool_dt. Both tables doesn't have any primary keys. Please find below my code. I removed all the unnecessary columns for simple understanding. INSERT INTO tool_summary (tool_nbr, tool_dt) select tool_nbr, tool_dt from #tool order by tool_nbr, tool_dt...But this query is not working as expected. Data is getting shuffled.
Actual Data
Expected Result
1000
1-Aug
1000
1-Feb
1000
1-Jul
1000
[code]....
View 3 Replies
View Related
Dec 19, 2007
WE have a job that loads data from an Oralce DB into our SQL Server 2000 DB twice a day. The schedule has just changed so that now there is a possibility of having my west coast users impacted when it runs at 5 PM PST and my east coast users impacted when it runs at 7 AM EST. As a workaround, I have developed a DTS package that loads the data into temp tables instead of the real tables. IE. Oracle -> XTable_temp instead of Oracle -> XTable. The load sometimes takes about an hour to an hour and a half to load, so this solution works great, but I want to then lock the table, delete it and rename the temp table to table X. The pseudo code would be:
Begin Transaction
Lock Table XTable
Drop XTable
Alter Table XTable_temp rename to XTable
Release Lock XTable
End Transaction
Create XTable_temp
I see two issues with this solution. 1) I think if I can lock XTable that the lock would be released when the table is dropped and the XTable_temp was being renamed. 2) I can't find a command to rename a table.
Any ideas on a process that might help?
TIA,
A
View 5 Replies
View Related
Jul 11, 2006
I want to pass the 'inserted' table from a trigger into an SP, I think I need to do this by dumping inserted table into a temporary table and passing the temp table. However, I need to do this for many tables, and don't want to list all the column names for each table/trigger (maintenance nightmare).
Can I dump the 'inserted' table to a temp table WITHOUT specifying the column names?
View 16 Replies
View Related
Apr 11, 2000
Got the following message while trying to apply sp5a:
"Setup initialization could not be successfully completed.
ISQL.EXE could not be executed. Please check the relevant .OUT file."
And yes, i did check the readme file, but found no problem in the PATH variable.
(unless I'm looking at it wrong!)
Please help!
View 2 Replies
View Related
Feb 9, 1999
I am trying to apply SQL Server Service Pack 5a to my original SQL
Server 6.5 but an error keeps coming up "Setup initialization could not
be successfully executed. ISQL,EXE could not be executed.Pls check
relevant .out file".
The last line of the relevant .out file produced by this error is:
You cannot run SELECT INTO this database. The DBO would have to run
sp_dboption to enable this option.
Msg 208, Level 16, State 1, Server REYWINNT, Procedure sp_helpsort, Line
295
I would appreciate any help to solve my problem
Thanks a lot
Rey Caunca
View 2 Replies
View Related
Mar 10, 1999
I have a third party app that has been 'certified' by the vendor on SQL 6.5 SP5. We are aware of the dump database issues when using SP5 and Enterprise Manager. We would like to use SP5a to get around those issues.
Is anyone aware of any other 'bugs' or problems that have come about in SP5a....
Thanks tons!
Dean
View 1 Replies
View Related
Jun 28, 1999
Is there a proper order to installing SQL SP5a. Should you reinstall NT SP4 after you install
the SQL SP5a?
View 1 Replies
View Related
Sep 4, 2004
Hi All
I am using SQL 2000 on win 2003 server and I have been using the query analyzer and a stored procedure to add records to a particular table.
For some reason the ID column which is an identity column and is seeded to increment by 1, skips numbers every once in a while. I haven't used any deletes and there have been no errors when loading the info.
Has this happened to anyone else? Where do I start looking for possible causes
Thanks
P
View 3 Replies
View Related
Apr 17, 2007
Iam extracting data from Excel to SQL Destination. In my excel file there are some null values rows are there, just want to skip those null and rest have to export to SQL server Destination. Anyonce can helpme in this.
View 3 Replies
View Related
Jan 13, 2000
I've got a script that runs regularly to monitor log space usage on a SQL 6.5 sp5a server. Where the log space usage is greater than 75% it then dumps the log. However the Enterprise Manager screen still shows usage as being above 75%. I'm aware that I need to run dbcc checktable(syslogs) to have EM reflect the change, and my question is:
Within my sql script how do I switch context to the database where I need to run the dbcc checktable(syslogs) command?
View 4 Replies
View Related
Sep 10, 1999
I currently have SP5 in a folder on the server desktop. MSSQL Server is installed on drive E:
Running setup, it finds SQL Server and shuts it down. It then returns errors about not being able to find files, though the files are actually there.
I appologize for the brain-cramps, as I know this has been discussed before, but I need HELP ASAP.
Thanks
Steve Jimmo
View 1 Replies
View Related
