We are performing a SQL 2005 SP1 upgrade from SQL 2000 on our Windows 2003 SP1 Standard Edition.
When we run the upgrade, we got a error "Upgrade Advisor Return -1" as a pop-up window.
When we run the Upgrade Advisor separately, we get this error :
===================================
Common Language Runtime detected an invalid program.
===================================
Common Language Runtime detected an invalid program. (System.Xml)
------------------------------ Program Location:
at System.Xml.Schema.SchemaInfo..ctor() at System.Xml.Schema.XmlSchemaSet..ctor(XmlNameTable nameTable) at System.Xml.XmlReaderSettings.get_Schemas() at Microsoft.SqlServer.UpgradeAdvisor.ReportViewer.UAReportController.LoadAndValidateDataFile() at Microsoft.SqlServer.UpgradeAdvisor.ReportViewer.UAReport.ValidateDataFile() at Microsoft.SqlServer.UpgradeAdvisor.ReportViewer.UAIssueReport.Refresh() at Microsoft.SqlServer.UpgradeAdvisor.ReportPanel.OpenReport(String reportFile)
We are in a lost for solutions. We do hope to hear from anyone asap...
We are running a test upgrade form sql 2000 standard edition 32 bit to sql 2005 developer edition 32bit. Followed through all the steps and specified the account(SA priveleges and currently used by the 2000 version) and is the local admin on the box for the services and the setup seemed to move fine, except for when it got to the point of installing database services - This is the error message that I got:
MSSQLServer could not be started. Verify you have sufficient priveleges to start system services. The was no choice but to hit cancel and then the set up progressed with a final message of 'SEtup failed'.
Here is a portion of the error log: Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required. Database Mirroring Transport is disabled in the endpoint configuration. Starting up database 'master'. Converting database 'master' from version 589 to the current version 611. Database 'master' running the upgrade step from version 589 to version 590. Error: 946, Severity: 14, State: 1. Cannot open database 'master' version 589. Upgrade the database to the latest version. System Task Aggregate global counters produced an error that was not handled. Major: 9, Minor: 46, Severity:14, State:1 Error: 928, Severity: 20, State: 1. During upgrade, database raised exception 15151, severity 16, state 1, address 01C4C50B. Use the exception number to determine the cause. Error: 15151, Severity: 16, State: 1. Cannot find the endpoint 'TSQL Local Machine', because it does not exist or you do not have permission.
I am out of brain cells. I can not figure out how to upgrade instances of sql express to sql 2005 or even add an instance of sql 2005. I have installed/upgraded everything else (SSMS, etc.) to SQL 2005. I am dazed and confused. I don't even know where to start in explaining what I have tried and done. I have 303 log files going back to 3/27/2007 from various attempts. Where do I start in figuring this debacle out???
I currently have SQL Server Management Studio Express 2005 and would like to upgrade my machine to SQL Developer 2005 as easily as possible. Keeping my databases and such.
Any recommendations on the best way to do this would be greatly appreciated.
I am trying to upgrade SQL Server Express 2005 Report Server to SQL 2005 Standard and it fails with the following error:
SQL Server Setup did not have the administrator permissions required to copy a file: C:Program FilesMicrosoft SQL ServerMSSQL.8Reporting ServicesReportServer ssrvpolicy.config. To continue, verify that the file exists, and either grant administrator permissions to the account currently running Setup or log in with an administrator account. Then run SQL Server Setup again.
After I click OK on the message, this whole path where the upgrade is bieng installed dissapears C:Program FilesMicrosoft SQL ServerMSSQL.8Reporting Services. The error is a bit missleading because the file that it is trying to copy rssrvpolicy.config does appear in that upgrade folder so I am not sure why it would try to copy a file that has already been copied.
I was able to upgrade the Database Engine instance fine but can't upgrade Reporting Services due to that error. I have verified that the account that ran the setup had the administrator permissions. Your prompt reply to my question would be greatly appreciatted.
I am trying to upgrade SQL Server 2005 Express to SQL Server 2005 Enterprise Edition. (As a Preparation to install SQLServer2005 Service Pack 2 (CTP))
I tried to upgrade a particular Instance (OFFICESERVERS, which was based on SQL Server 2005 Express ).
During the upgrade I get a message saying that ...
.....Your upgrade is blocked because of edition upgrade rules.....
All other components I selected for Installation are propertly installed (Analysis, Reporting)
The setup log contains the following detail information:
---- Context ----------------------------------------------- Setting status of unmanaged components and removing unmanaged resources
Error Code: 29543 MSI (s) (DC!C8) [13:57:26:265]: Product: Microsoft SQL Server 2005 -- Error 29543. Your upgrade is blocked. For more information about upgrade support, see the "Version and Edition Upgrades" and "Hardware and Software Requirements" topics in SQL Server 2005 Setup Help or SQL Server 2005 Books Online. Edition check: Your upgrade is blocked because of edition upgrade rules. For more information about edition upgrades, see the Version and Edition Upgrades topic in SQL Server 2005 Setup Help or SQL Server 2005 Books Online.
Error 29543. Your upgrade is blocked. For more information about upgrade support, see the "Version and Edition Upgrades" and "Hardware and Software Requirements" topics in SQL Server 2005 Setup Help or SQL Server 2005 Books Online. Edition check: Your upgrade is blocked because of edition upgrade rules. For more information about edition upgrades, see the Version and Edition Upgrades topic in SQL Server 2005 Setup Help or SQL Server 2005 Books Online. <Func Name='SetCAContext'> <EndFunc Name='SetCAContext' Return='T' GetLastError='0'> Doing Action: ValidateUpgrade PerfTime Start: ValidateUpgrade : Fri Dec 29 13:57:26 2006 <Func Name='ValidateUpgrade'> <Func Name='updateFeatureSellection'> Error Code: 0x80077367 (29543) Windows Error Text: Source File Name: sqlcaupgradeproduct.cpp Compiler Timestamp: Mon Sep 19 01:07:45 2005 Function Name: sqls::UpgradeProduct::CanUpgrade Source Line Number: 142
The result is the same, i.e.... Your upgrade is blocked because of edition upgrade rules...
Does anybody know about this problem? Some more information about the system: W2K3 R2 Enterprise Edition WSS3.0 MOSS2007 previously installed SQL Server 2005 Express Edition (Version 9.00.2047.00)
I've been reading and looking over what to do for my situation for several days. I need to ask and see if I can get a clear answer.
My Scenario: I have a SQL Server 2005 Eval installed that is currently running with live data. I need to upgrade that to a recently-purchased full version. I have several databases set up. I have ready the article 914158 that states it will fail. It's still running so I can access everything. If I restart or stop the service I'm screwed.
we have installed SQL 2005 Standard and we are planning to upgrade to SQL 2005 Enterprise version. Do i need to uninstall SQL 2005 Standard and reinstall Enterprise or i can install SQL 2005 Enterprise on top of standard version to upgrade.
i have a server which is configured with sql 2005 and when i schedule a backup all the databases do not get listed while selecting (all databases) while scheduling ...then i found that there are some databases with the cmpt level 70 and those databases do not get listed while scheduling backup,, is there any solution for this ... how to change the cmpt level.. from 70 to 90, is there any precautions i need to take care ....is it possible to do the above...pls help
We need to update our SQL 2000 to 2005. We plan to use it on a computer with 2 processors. Actually we update 2 servers that form a cluster, running web applications. I think there is no update version from 2000 to 2005. So we have to buy 2 full versions of SQL 2005? For our case it's probably best to buy SQL 1CPU version? But we have 2 processors on each server. Is there a CPU license? Do we have to buy 2 SQL 2005 1CPU plus 2 licenses for 1 (more) CPU? Sorry, I am not so familiar with SQL. I am not the guy making the upgrade. I just have to order the correct version and licenses.
We currently have a deployment of SQL 2000 on three production 32 Bit servers. One server to house the Data, one server for Analysis Service Cubes, and one for Reporting Services. At the time of this deployment, this was Microsoft's recommendation.
If we upgrade to SQL 2005 and also upgrade our systems to 64 Bit systems. What are the recommendations for Analysis Services and Reporting Services? Do they still require separate servers or can they reside on the same server?
I have a Windows 2003 server running both a MSDE and SQL 2005 Database. I want to upgrade SQL to SP1. Does anyone know if upgrding SQL 2005 to SP1 will affect the MSDE?
Hello, I have a project where I have to upgrade SQL 2000 to 2005. When we are upgrading we are going to move to new server so server name will change. Most of our applications have a hard coded connection string. Applications are developed with Classic ASP, .NET 1.1 and 2.0 as well. Now the question is what is the best way to do this? Changing all the connection string will be a very painful task as we have many applications. Can anyone suggest a way where we can achieve this without changing all the connection strings? Thanks in advance. Tareq
We have SQL Server 2005 Standard edition in a box. We need to update (install) that box with SQL Server Developer editions. Please let me know what are the ways to do it.
what are some of the issues that we might face while upgrading from SQl 2000 to SQl 2005? Actually I have to create upgrade plan for path from MS 2000 to MS 2005.
I would like to upgrade sql server 2000 to sql 2005. So Can I install the sql server 2005 on the same server where sql 2000 is already running and then use the database upgrade wizard. Or should I install the sql server 2005 on a different server.
Hi,We are running a test upgrade form sql 2000 standard edition to sql2005 developer edition. Followed through all the steps and specifiedthe account(SA priveleges and currently used by the 2000 version) andis the local admin on the box for the services and the setup seemed tomove fine, except for when it got to the point of installing databaseservices - This is the error message that I got:MSSQLServer could not be started. Verify you have sufficientpriveleges to start system services. The was no choice but to hitcancel and then the set up progressed with a final message of 'SEtupfailed'.Here is a portion of the error log:Attempting to recover in-doubt distributed transactions involvingMicrosoft Distributed Transaction Coordinator (MS DTC). This is aninformational message only. No user action is required.Database Mirroring Transport is disabled in the endpointconfiguration.Starting up database 'master'.Converting database 'master' from version 589 to the current version611.Database 'master' running the upgrade step from version 589 to version590.Error: 946, Severity: 14, State: 1.Cannot open database 'master' version 589. Upgrade the database to thelatest version.System Task Aggregate global counters produced an error that was nothandled. Major: 9, Minor: 46, Severity:14, State:1Error: 928, Severity: 20, State: 1.During upgrade, database raised exception 15151, severity 16, state 1,address 01C4C50B. Use the exception number to determine the cause.Error: 15151, Severity: 16, State: 1.Cannot find the endpoint 'TSQL Local Machine', because it does notexist or you do not have permission.Any help would be greatly appreciatedThanks KR
I have a sql 2000/2005 side-by-side install on a single server. I right-click a sql 2000 database, select All Tasks, and the Copy Database to upgrade a sql 2000 database. In the "Copy Database Wizard" I see the message:
"To use the detach and attach method SQL Server Agent must run under an Integration Servicers Proxy account that can access the file system of both the source and destination servers."
1. What does that mean?
2. I decided to click "Finish" in the wizard, and the database copy seemed to work fine. Whaterver 1) means does, by default, the SQL Server Agent already run under this "Integration Services Proxy" account. (Rememberr the upgrade process did work).
I am trying to upgrade from SQL Server 2000 SP4 to SQL Server 2005. But I am getting an error saying that " Your operating system does not meet service pack requirements for the SQL server release. Install the service pack from the Microsoft download center at http://go.microsoft.com/fwlink/?LinkID=50380, and then run the SQL Server Setup again. For system requirements, see hardware and software requirements, in the readme or in SQL Server Books online."
I don't know what other service pack I would need to upgrade to again when I already have SP4 installed. Could someone tell me what I need to do next.
Looking for some type of solution on this issue. I'm going from SQL2000 to SQL2005 and I run the upgrade advisory tool and all and I'm going through the procedures of getting our SQL server updated to SQL2005, when I attempt to run that analyzer to take a look at how well the migration will go. I get a timed out error message on the fallowing.
Exact error message and its always the same for each entry. "Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding"
Any help in this are would be greatly appreciated, all other issues have been resolved I'm just stuck on this and I don't want to upgrade until the advisory tool gives me the ok to.....
We have SQL Server 2005 Standard edition in a box. We need to update (install) that box with SQL Server Developer editions. Please let me know what are the ways to do it.
