The DTS package would execute and immediately fail. a reboot of this server fixed the problems, but does anyone know how to get more info out of DTS to state why it failed, we have branch on error and NT event log entries, but nothing specific to state why. The 1st task is to assign global variables, but I'm not even sure it got that far.
Obviously the problem is fixed now, but if it happens again, some ideas of how to get data out would be useful.
Job is failing for one DB
I receive below errors
EVENT LOG:
sql server scheduled job 'db name'
(0x5EA2833965097647B1D375899CE3E179)-Status Failed-Invoked on 2007-12-09 00:01-Message: The Job Failed.The job was invoked by schedule1 (sunday 12 am) . The last step to run was step 2(db name)
Job History:
step 1:
Excuted as user NT AUTHORITYSYSTEM. The step succeeded
step 2:
Excuted as user: NT AUTHORITYSYSTEM . Invalid object name '#DiskSize'.[SQL STATE 42S02][Error 208]. The step failed.
step 3:
The job failed. The job was invoked by Schedule 1 (sun 12 am). The last step to run was step 2{db name}
I am new to SQL server, please help?
Thanks in advance
I have SQL Server 2000 DTS package
There are four task
1. creating a temp table by joing different table on same server server 1.
2. Truncate table on Server 2
3. Transform data from Server 1 to server 2.
4. do update on table in Server 2.
I have full access to server 1 and 2. it works fine for me. When one of our developer, she doesn't have rights on server 1.
whenever she runs dts package it not showing any error but dts successfully completed. but there data is not poluated on server 2.
if she run task by task, task 1 failed reason log in failed, that's is correct that what we expect
but when run as package it is not failing, dts reported success, on popup window shows all task not run
is there any setting that tells DTS to fail if any task is failed. or any form of notification.
we can't use sa for connection, we have to use windows login only, we are looking for a solution that will tell us dts failed.
thanks
Kal
Job is failing for one DB
I receive below errors
EVENT LOG:
sql server scheduled job 'db name'
(0x5EA2833965097647B1D375899CE3E179)-Status Failed-Invoked on 2007-12-09 00:01-Message: The Job Failed.The job was invoked by schedule1 (sunday 12 am) . The last step to run was step 2(db name)
Job History:
step 1:
Excuted as user NT AUTHORITYSYSTEM. The step succeeded
step 2:
Excuted as user: NT AUTHORITYSYSTEM . Invalid object name '#DiskSize'.[SQL STATE 42S02][Error 208]. The step failed.
step 3:
The job failed. The job was invoked by Schedule 1 (sun 12 am). The last step to run was step 2{db name}
I am new to SQL server, please help?
Thanks in advance
Hi Folks,
I have been struggling with a problem for the last couple days now regarding MSTD and distributed transactions. The main issue is that 3 servers are each sitting in a different domain. Non of the domains trust each other.
As of yesterday, I could get all the SQL 2005 chatting to each other using MSDTC without a problem. However, I have a SQL 2000 box which refuses to work. A normal query across a linked server works fine. A distributed transaction will not work. This is the case from A to B and B to A.
I have tested with DTCPing and it says all is ok.
The error messages are:
SQL 2000 > SQL 2005
OLE DB provider "SQLNCLI" for linked server "T-ServerTServer" returned message "No transaction is active.".
Msg 7391, Level 16, State 2, Line 2
The operation could not be performed because OLE DB provider "SQLNCLI" for linked server "T-ServerTServer" was unable to begin a distributed transaction.
And the other way round:
[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a].
Msg 7391, Level 16, State 1, Line 2
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
If watching the DTC monitor, it shows an active transaction then goes back to 0.
All instances are on a 4 node cluster with 3 nodes turned off for the testing.
I have run out of things to try. Most of the symptoms for the above messages are to do with DTC security, the Turn RPC Security Off reg hack. All instances and OS (W2K3) are the latest updates / patches.
As for the 3rd server, SQL 2005, it is happy to talk
Anybody got a gem which I can try?
Edit: Both SQL 2005 servers are x64 while the 2000 is x86
Cheers,
Crispin
I've got SQL 2000 set up on a cluster running Windows 2000 Advanced Server (w/SP1).
Setup for Failover Clustering appeared to succeed normally on both nodes.
The SQL 2000 server logs show:
2001-01-11 10:02:57.82 server SuperSocket Info: Bind failed on TCP port 1433.
2001-01-11 10:02:57.85 server SQL server listening on Shared Memory, Named Pipes.
2001-01-11 10:02:57.85 server SQL Server is ready for client connections
I've checked to see if something else is using port 1433 (unlikely) and don't see anything.
The physical node that SQL 2000 is currently on has no other cluster resources assigned to it.
Any ideas?
We have a stored procedure that calculates the floor nr for users at our company campus using their office location. The calculation is done by a function that returns an integer. Unfortunately, not all users enter their information correctly so the function sometimes raises an error. Below is the code of that stored procedure.
UPDATE PERSONS
SET FLOORNR = dbo.FloorNR(OFFICELOCATION)
WHERE OFFICELOCATION IS NOT NULL
IF(@@ERROR <> 0 OR @@ROWCOUNT = 0)
BEGIN
RAISERROR ('Failed to calculate the floor number', 16, 1 ) with nowait
END
However, when the function dbo.FloorNR fails, it doesn't raise our error, but it seems to raise the error that comes from dbo.FloorNR.
How can we catch errors that come from dbo.FloorNr so that we can raise our own error? Our company still uses SQL 2000, so we cannot use the SQL 2005 try/catch option.
i ran it from the command prompt. I used my nt account which belongs to the domain admin nt group. my account does have sql access as sa.
also on one of the servers all jobs are failing with the following message - Unable to Connect to Sql Server (local). The nt log records the error that the specific user sqlexec (this is the account on which sql executive runs) is not defined as a valid user of a trusted sql server connection. I am not able to change the security setting on this server using EM nor am i able to use the sql security manager. I get an access denied error. What is the workaround for this problem? Will stopping and restarting the sql service help?
------------
How did you run bcp? In dos prompt or as sql job? Which nt account did you run bcp under? Did you grant sql access for that nt account?
------------
aruna at 1/3/01 4:39:49 PM
Subject:
From:
Date: bcp failing (reply)
Ray Miao ()
1/3/01 4:15:33 PM
yes i did. it still gives me the same error - 18452 error not associated with a trusted connection
-----------------
Did you enable mixed login mode on the server?
------------
aruna at 1/3/01 2:55:59 PM
hello ray
It still does not work. I granted SA rights for the nt group via sql security manager. For one of the servers i get the following error message -
This sql server does not support Windows NT SQL Server Security stored procedures.
--------------
From:
Date: bcp over trusted connections failing (reply)
Ray Miao ()
1/3/01 12:51:50 PM
Use security manager to grant access for nt account.
------------
aruna at 1/3/01 11:59:49 AM
i am attempting to bcp using the -T (trusted connection) option in sql 6.5. the login security mode is set to integrated. the bcp is however failing with msg 18452 error not associated with a trusted connection. why is this happening? i do not want to hardcode the sa password in the bcp command.
thanks
I have an excutable on the c drive and I have created a job to run that excutable
In the Job
C:Folderjob.exe BA
The job was running until we had a power outage. Now I can get it to run with a scheduled job, the only way I can get it to run is typing it on the command line. I have tried droping and recreating this job but nothing works.
The error is: The stip did not generate any out put.
Do I need to troubleshoot the excutable which is a whole other beast.
Any help would be great.
Thanks
We have a sqljob keep failing if we set the ownership of the job other than 'sa'. Any idea why this fails?
View 6 Replies View RelatedHi,
View 6 Replies View RelatedI have a scheduled job on a SQL 2000 database which is failing. Here is the error message :
The job failed. Unable to determine if the owner (cacisnasir) of job Integrity Checks Job for DB Maintenance Plan 'IDS' has server access (reason: Could not obtain information about Windows NT group/user 'cacisnasir'. [SQLSTATE 42000] (Error 8198)).
I am the SA on the instance. I wonder why would I be getting this error message? I am able to logon to this instance and browse and change things. So clearly it recognizes me. But when I run the job it fails. Wonder why? my SQL Server version is 8.0.
Dear Reader,
Currently I am building an application for a theme park where I work as a trainee for school, one project for me is to rebuild all the hundreds of databases into a few sql driven application's. Now I got a problem whit the use of SCOPE_IDENTITY(). Because the data has to be correct before inserting it into the database I use the transact features of .NET and I create 1 SQL string wich I dump in that method. The problem is that I can't be able to use the value of SCOPE_IDENTITY() for some reason, maybe you guys see a mistake in the actual (dynamic) query:
Here is the query built up by my program to write the data (of a single form) into the database:
DECLARE @OID int;
INSERT INTO Medisch (med_za_ID, med_WeekNr, med_Enen, med_Bijzonderheden, med_AfwijkendGedrag, med_SexGedrag, med_GemAdemhaling, med_GemHoesten, med_Temperatuur, med_Conditie, med_BloedGeprikt, med_Cupje, med_BasisVis, med_Eetlust, med_GemGewicht)VALUES(3,1123,,'','','',,,,'','False','False',45,'',);
SELECT @OID = SCOPE_IDENTITY();
INSERT INTO Medisch_Medicijnen_Details (mmd_mmt_ID, mmd_med_ID, mmd_Hoeveelheid, mmd_Aantal) VALUES(@OID, 2,23, 23 );
Everything else works unless the SCOPE_IDENTITY() things.
I hope someone can help me out fixing this mistake.
Tnx in advanced,
Grz.
Stefan
Sql Guru's,
I have some DTS packages some times failing.one day sucess and next day it's failing. The following error showing.
DTSRun: Executing... DTSRun OnStart: DTSStep_DTSExecuteSQLTask_3 DTSRun OnError: DTSStep_DTSExecuteSQLTask_3, Error = -2147217900 (80040E14) Error string: OLE DB provider 'SQLOLEDB' reported an error. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 Error Detail Records: Error: -2147217900 (80040E14); Provider Error: 7399 (1CE7) Error string: OLE DB provider 'SQLOLEDB' reported an error. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 Error: -2147217900 (80040E14); Provider Error: 7312 (1C90) Error string: [OLE/DB provider returned message: Timeout expired] Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 DTSRun OnFinish: DTSStep_DTSExecuteSQLTask_3 DTSRun OnStart: DTSStep_DTSExecuteSQLTask_1 DTSRun OnFinish: DTSStep_DTSExecuteSQLTask_1 DTSRu... Process Exit Code 1. The step failed.
Any body help me. This is very urgent
this is the message that i'm getting and i dont know what to do so that i can access my SQL databases thru cold fusion:
ODBC Error Code = 37000(Syntax error or access violation)
[Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.
i didnt have any problems with this database until i moved it over to another SQL server and tried the cold fusion front end to it. i dont know what to do now.
I have inherited the task of setting some standards for SQL Server setup and usage in my company. Use of SA with and without a password was rampant. As I get DTS jos and VB code changed to use another account I have been securing the SA account with a password that no one uses. I now get a multitude of failed logins for the SA account on multiple systems by people trying to logon as SA, not jobs. Is there any way to generate an error message that will pass the host PC or server, or network ID of the user trying to login with the SA account?
Thanks in advance.
Bill
When I create a DTS to import data from Visual FoxPro it will work if I run immeadiately, but when I schedule it to run at a specific time it will Fail.
Any ideas why??
Thanks for any input,
Tom
HELP!
I have a table with a field called remarks as text field. I have a trigger on it,
"Create Trigger trg_inbox_bess506a_mstr_on_del
On dbo.inbox_bess506a_mstr
For Delete
As
-- 040226, archive inbox to arc
set nocount on
insert into inbox_bess_mstr_arc (
pk_id,
batch_id,
py,
appropriation,
issueFrom,
issueTo,
submitBy,
submitDate,
validID,
validDate,
approveDate,
approveBy,
accountCode,
transType
--remark
)
select
pk_id,
batch_id,
py,
appropriation,
issueFrom,
issueTo,
submitBy,
submitDate,
validID,
validDate,
approveDate,
approveBy,
accountCode,
transType
--remark
from deleted
return
GO"
It fails with an error message:
"Server: Msg 21, Level 22, State 1, Procedure
trg_inbox_bess506a_mstr_on_del,
Line 8
WARNING - Fatal Error 7113 occurred at Dec 22 2004 11:25PM. Please
note the
error and time, and contact your System Administrator."
It's failing on a field with remarks greater than 1885 chars.
When I used a stored procedure to do the same, it worked. Why is the trigger failing now? Is there a limit on size for triggers and not procedures?
THANKS!!!!!!
Hello I have two tables that have the same data in them but not all the data is in the new table. the old one has 397 more records then the new one and I need to insert that data in the new table but it keeps giving me a primary key violation rule.
SELECT dbo.Revised_MainTable.[IR Number], dbo.Report.[Incident Report No], dbo.Report.Date, dbo.Report.[I/RDocument], dbo.Report.TypeOfIncident
FROM dbo.Revised_MainTable RIGHT OUTER JOIN
dbo.Report ON dbo.Revised_MainTable.[IR Number] = dbo.Report.[Incident Report No]
WHERE (dbo.Revised_MainTable.[IR Number] IS NULL)
Can anyone help me please???
Error:
Microsoft OLE DB Provider for SQL Server error '80040e4d'
Login failed for user 'administrator'.
/ssconn.asp, line 12
Code:
oConn.Open "Provider=sqloledb;" & _
"Network Library=DBMSSOCN;" & _
"Data Source=198.107.136.50,1433;" & _
"Initial Catalog=GradeTrax;" & _
"User ID=administrator;" & _
"Password=password"
Your much wanted advice:
got it, thanks
View 5 Replies View RelatedI have a SP that basically copies data from one table to another.
Some of the data could be duplicates and so the SP detects any primary
key violations (error 2627) and if detected uses a random number for
the PK and tries the insert again.
This SP works fine when run manually from Management Studio but when
scheduled as a job step, it fails. From investigation, it seems that
the logic to handle PK violations is being processed but if there are
more than around 16 PK violations in the batch copy, the job step
fails at around the 17th violation insert and fails to process the
rest of the step.
When this happens, as well as seeing the 2627 error logged in the
message field of the job log history, it also records an error code
3621 in the SQL Message ID field of the log with Severity 14.
Does anyone know why this SP should fail as a job? I have checked
permissions and also tried setting the agent login and job owner to
the same account that successfully ran the SP in Mangement Studio but
this also failed.
At present the only way to get this job to run is to set the step
retry attempts to a number greater than the number of fails. Each
time the job is rerun, it will process a certain number before failing
and it only fails after processing a certain number of PK violations.
This work around is fine in a test environment of a few hundred
records but this job needs to process roughly 75,000 records and if all
these happened to be duplicates, it would require over 4500 retries
assuming its fails after every 16 records.
Thanks in advance.
Matt
I have a SP that basically copies data from one table to another.
Some of the data could be duplicates and so the SP detects any primary
key violations (error 2627) and if detected uses a random number for
the PK and tries the insert again.
This SP works fine when run manually from Management Studio but when
scheduled as a job step, it fails. From investigation, it seems that
the logic to handle PK violations is being processed but if there are
more than around 16 PK violations in the batch copy, the job step
fails at around the 17th violation insert and fails to process the
rest of the step.
When this happens, as well as seeing the 2627 error logged in the
message field of the job log history, it also records an error code
3621 in the SQL Message ID field of the log with Severity 14.
Does anyone know why this SP should fail as a job? I have checked
permissions and also tried setting the agent login and job owner to
the same account that successfully ran the SP in Mangement Studio but
this also failed.
At present the only way to get this job to run is to set the step
retry attempts to a number greater than the number of fails. Each
time the job is rerun, it will process a certain number before failing
and it only fails after processing a certain number of PK violations.
This work around is fine in a test environment of a few hundred
records but this job needs to process roughly 75,000 records and if all
these happened to be duplicates, it would require over 4500 retries
assuming its fails after every 16 records.
Thanks in advance.
Matt
I was hoping if someone can help me shed some light on the following error messages -
Some of the billing jobs in SQL are failing, here is the message from application log - This is happening on the production server.
"SQL Server Scheduled Job 'Transaction Log Backup Job for DB Maintenance Plan 'DB Maintenance Plan3'' (0x8BCD2C33DF5EC447BC7F1228E2C455E4) - Status: Failed - Invoked on: 2007-12-20 06:00:01 - Message: The job failed. The Job was invoked by Schedule 54 (Schedule 1). The last step to run was step 1 (Step 1)."
Has anyone seen this message before, whats a way to fix this issue.
Nishi
Backup job for User databases is failing.
I found below errors
View job history
Step 0:
The job failed. The job was invoked by schedule 4(DBMP_User). The last step to run was step 1(subplan)
Step 1:
Message: Executed as user ServernameSystem. The package execution failed. The step failed
Appln-event log:
SQL server scheduled job DBMP_User failed. Invoked on 2007-12-24 , the job was failed.
Sql server error log
Database backed up. DBname creation,date()time……paged dumped 8434659,first LSN: 21126:101410:48,last LSN :21128:933:1, number of dump devices:1, device information: file=1,type=disk (E:MSSQLBACKUP )
This is an informational message only. No user action is required
Error log:
Date:
Log: SQL Agent (current …)
Message:
(396) An idle CPU condition has not been defined-OnIdle job schedules will have no effect.
Please advice how to proceed?
I have been trying in vain to get a DTSX to return to a vb.net application that it has failed, all i get back is a
ReturnResult = success.
In the dtsx is the following;
Secquence
- Transaction Option set to Required
- FailParentonFaluire set to True
- FailPackageonFaluire set to True
- MaximumErrorCount set to 0
Inside the sequence Container
DataFlowTask
- Transaction Option set to Required
- FailParentonFaluire set to True
- FailPackageonFaluire set to True
- MaximumErrorCount set to 0
ExecuteSQLTask
- Transaction Option set to Required
- FailParentonFaluire set to True
- FailPackageonFaluire set to True
- MaximumErrorCount set to 0
I have run the package from my vb.net application and it runs fine, importing data from a file. I tried running it with a bogus file name that doesnt exsist and it still returned a ReturnResult = success. I need it to return a failed result on any errors, which is what i thought it would do as i have it sey to fail the package on errors throughout each task ... am i missing something ?
I have an SSIS package that does one simple thing: perform a FULL backup of a database.
I executed this package yesterday at 2:00. The package backs up to four individual files on a network share. The network share is accessible from the SQL Server. THe database in question is 245GB in size.
The package was running fine when I left for the day. When I got in today, there was an error in the SQL Server log:
Error: 3041, Severity: 16, State: 1.
BACKUP failed to complete the command BACKUP DATABASE ServicingODS. Check the backup application log for detailed messages.
Where is this infamous backup application log?!? The Event Viewer says the same thing. Needless to say, the error message is a bit vague.
There were no "issus" overnight (power outages, network issues, etc.)
Anyone have any ideas?
Thanks!
I set up a full backup maintenance plan for my databases and the database portion of the backup jobs completes successfully, but the transaction log portion successfully backs up master and model, but fails for the other databases with the message:
Backup can not be performed on database 'msdb'. This sub task is ignored.
What's the problem?
Bob
SQL Server 2005 version: 2153
I created a maintplan for system and user databases includes rebuild index, maint cleanup tasks.
Job is failing for user databases
It includes rebuild index task( online index enabled) and maintenance cleanup task, scheduled at every sunday 1 AM.
I receive following errors:
In eventvwr log
sql server scheduled job 'DBMP_RebuildIndex_User'
status: failed-Invoked on 2007-12-02 -1:00 Message: The job failed. The job was invoked by schedule 8 ('DBMP_RebuildIndex_User-Schedule).The last step to run was step1 ('DBMP_RebuildIndex_User')[/red]
In log report:
Failed-1073548784) Excuting the query "ALTER INDEX [XPKact_log] ON
[dbo].[act log] REBUILD WITH (PAD_INDEX=OFF,
STATISTICS_NORECOMPUTE=OFF,ALLOW_ROW_LOCKS=ON,ALLOW_PAGE_LOCKS=ON,SORT_IN_TEMPDB=OFF,ONLINE=ON)
"failed with the following error "Online index operation cannot be performed for index 'XPKact_log' because the index contains column 'action_desc' of data type text, ntext.image.varchar(max),varbinary(max) or xml. For non clusterd index the column could be an include column of the index. for clusterd index it could be any column of the table .Incase of drop_existing the cloumn could be part of new or old index. The operation must be performed offline". Possible failure reasons : Problems with the querey .'" Resultset" property not set correctly, parameters not set correctly, or connection not established correctly.
Please anyone help me on this?
I really appriciate
Thnks
Trying to create a catalog as seen below:
CREATE FULLTEXT INDEX ON [dbo].[AttachFiles](
[BinFile])
KEY INDEX [PK_AttachFiles] ON [Dossiers_FTC]
WITH CHANGE_TRACKING OFF
GO
Getting error of:
Msg 7655, Level 16, State 1, Line 1
TYPE COLUMN option must be specified with column of image or varbinary(max) type.
BinFile is an Image datatype.
What do I need to update on my CREATE statement above to make this work?
I am getting data from relational DB (RDB); column1 and column2 both type numeric (10,5). Column that I need to look up for Column1 is type string (10) and for Column2 is 2 byte signed integer.
So after I get data from RDB through Ole DB Source I have data conversion.
Column1 is Column1Converted (into string 10) and Column2 into Column2Converted (2 byte signed int)
Lookup is on the same table.
Trouble is following;
When I do this on my local SQL2005 it is all fine.
As soon as I point to another SQL Column1 lookup is failing, column2 is OK.
Error is:
[Lookup 07 1 1 [879]] Error: Row yielded no match during lookup.
I have checked data types for Column1 on my sql and other- all same.
I have a data viewer before lookup- it is there.
Column2 lookup is fine.
Any ideas?
thanks
Hi,
Actually i saved a SSIS package into a SQL Server 2005, then scheduled to run a job from SQL Agent, but, the job keep on failing and no error message was returned in order for me to toubleshoot.
After the job failed, i restart the job again, and it actually continue to run, but unfortunately, it stopped again after some time.
And, before i sheduled the job, i actually tried to run the package itself in SQL Server Business Intelligent, it runs suceessfully.
In the package, i actually set the ProtectionLevel to DontSaveSensitive.
Another option that I used to run the pakage was using dtexex.exe:
dtexec.exe /FILE "E:Package.dtsx" /MAXCONCURRENT " -1
"
But, the error message returned also not so useful.
So, can someone tell me how to troubleshoot this problem? What exactly the problem is that cause the job keep failing?
Thanks.
I have an interesting error that shows up on Windows Mobile 6.0 devices but does not appear to affect Windows Mobile 5.0 devices. The application runs in .NET CF 2.0 on SQL CE 3.0 using Merge Replication. When the application starts, there is an ExecuteNonQuery prior to calling the first synchronization. It appears that once the application has replicated that you can no longer create a connection to the database and run an ExecuteNonQuery successfully. If you have already created the SqlCeConnection and just open and close it as needed that you are able to run ExecuteNonQuery commands.
In Windows Monile 6.0; however, I eventually run out of memory, like there is a leak someplace. Does anyone have any ideas for how you would actually be able to dispose of the SqlCeConnection and recreate it each time? Does calling .Close() release all the native resources on a SqlCeConnection? I am trying out one more modification, I realized the SqlCeReplication object was not being disposed of and I'm guessing this probably also uses native resources; can anyone confirm this would also potentially cause a problem?
The application works but it is aggravating to have to softboot once in awhile to recover the memory, I'd like to move beyond it. Any ideas would be great!