I accidently installed SQL 2000 Enterprise Edition instead of the Standard Edition. If I uninstall Enterpise and then install Standard, can I restore the system databases, ie master, model, msdb? Are they compatible?
View 4 RepliesHi,
One of our main servers running on SQL Server 2000 Enterprise edition which has transactional replications on it which replicates to other servers running on the SQL Server 2000 Enterprise edition as well.
Due to Hardware problems the server is being migrated to a new machine but the client has installed SQL Server 2000 standard edition on the new machine.
We will be using a two processor cpu with 4GB RAM and we are also not planning about clustering. Is there any problem if i migrate the server in Standard Edition will the replications work properly between Standard and Enterprise editions.
What other complications can be there if i switch over to standard edition from enterprise edition
Thanks in ADVANCE
Jacx
hi, all:
I installed a Sql 2000 Personal Edition in my Laptop,now I want to change my Sql 2000 sa account password.
but I can not find where I can get the default password for sa account and how to change it .
thanks
We have an existing installation of SQL Server 2005 Developer Edition (64bit) that we are ready to go live with and would like to change the edition to Enterprise Edition (64bit). We have purchased all the appropriate licenses. We would like to avoid UN-installing the Developer Edition and RE-installing the Enterprise Edition. There must be some way to change a registry key, provide your serial number via a command line utility or re-run the setup with the license key provided and direct it to just change the edition from Developer to Enterprise and not change any of the other settings like service account, sa account, collation, etc. Any help is most appreciated.
Thank you,
Matt
Hi there
Our ISP hosts our data on SQL Server Enterprise, but I also going to host the databases on my local machine.
As it's just local would Standard edition do? If I migrate the databases over, will it work?
Thanks in advance.
I am getting the following warning on a Live SQL 2000 system:
This SQL Server has been optimized for 8 concurrent queries. This limit has been exceeded by 1 queries and performance may be adversely affected.
Reading about this error I realised that, by mistake, the version installed is a personal edition instead of the standard edition.
I am thinking to backup the databases, uninstall SQL 2000 Personal edition, install Standard edition and restore the databases back.
OR, disconnect the databases, uninstall the current version, install the standard version and re-connect the databases.
I haven't found within Microsoft any advice how to upgrade the personal version to the standard edition.
Because it is a live system, I would not like to mess the system up. Can you please advice?
Many thanks
Hi,
Can we degrade from SQL Server 2000 Enterprise Edition to SQL Server 2000 Standand Edition without doing Uninstall and reinstall?
Thanks in advance,
Hello all,
Here I need some help or suggestions for the following topic...
I am using SQL server 2000 enterprise edition installed on the machine. Now I wanted to change the edition from enterprise to standard.
There are around 4 user databases exists on the server.
What are the areas I have to take care while doing this? Could I do as normal installation?
No log shipping implemented on the server.
Your suggestions would be very helpful to me.
Thanks in advance.
I have SQL2005 Enterprise Edition SP1 installed and am trying to add Integration Services. When I run setup I get:
- Edition Change Check (Warning)
Messages
Edition Change Check
To change an existing instance of Microsoft SQL Server 2005 to a different edition of SQL Server 2005, you must run SQL Server 2005 Setup from the command prompt and include the SKUUPGRADE=1 parameter.
The media is copied onto the drive, so the files have not changed. Its the same media and the same version. Can anyone tell my what might be the cause of the error?
I have a named instance of SQL Server 2005 Developer Edition. I want to install VS Team System Foundation Server on the same box, but this needs a default instance of Standard or Enterprise edition. I installed the Standard version alongside the existing Developer instance but now I can't start SSIS and without it VSTS Foundation Server won't install.
I have tried to uninstall SSIS and reisntall it from both the Standard Edition and Developer edition media, but it makes no difference, the service still won't start.
Could the SSIS failure be due to having different editions on the same box? If so, is it possible to change the edition of the Developer instance to Standard (or to change them both to Enterprise edition) without having to uninstall and start all over again. The developer instance is used by several team members, so I don't want to have to uninstall it if I can help.
Any ideas anyone?
Can you install Sql Server 2000 Developer Edition with MSDE 2000 release A already installed?
View 2 Replies View Related
Hi,
I would like to find out if there is any way to upgrade SQL Server 2000 (Ent) to 2005 (STD)
The Instance has many logins and jobs etc and I dont want to loose those
A document or some advice on how to go about it would help
Thanks
Hello,
I have a table with the column description. Lets imagine that I have the records:
"a"
"b"
"c"
If this was a List and I wanted to move the "c" to the first position, I would simply remove the "c" and insert it in the 0 index position.
How can I do this with sql ce?
I could create another column named position and every time I would want to change the position, I would increment every other positions below. Example, "c" goes to first position:
position - description
1 - "a"
2 - "b"
3 - "c"
->
1+1 - "a"
2+1 - "b"
1- "c"
->
1- "c"
2 - "a"
3- "b"
But if I have lets say 100 thousand rows and I want to move the last one to the first position I have to do the operation 100K times.
Is there a more effective way to do what I want?
Thank you,
ARtur
Hello!I would like to change the SQL server 2000 from Standard version toDevelopment edition. I have two database running on this server, bothreplicated, with few jobs, etc ... Can you recommend the easiest way to dothis? I heard, it would be as easy as, detaching the databases, deletingcurrent SQL software, installing different one, and attaching the olddatabases back. I doubt that is true, so that's why I'm asking here for anyreal-life instructions.Thanks for your input!Kind regards,Dejan--
View 1 Replies View RelatedHi, all -
I'm trying to register a developer's 2000 pc from my 2005 pc.
i'm not sure this is even something possible from Dev Edition to Dev Edition- I can register a 2000 server just fine.
I can ping him. Both our systems have remote access 'on'. His server is (local), i've tried connecting to it by just entering his machine name and by using just the ip address. The error I get is "timeout expired. The timeout elapsed prior to completion of the operation or the server is not responding."
Am I just not registering this properly? I entered just the ip address in the 'server' box. I am connecting as sa with the pw he gave me. When i connect to my server, I use the ip addressinstance. However, I am not sure what to use for the instance when all I see when I look at his machine is (local).
I haven't needed to do this before.
Suggestions?
I tried to install this on the same box and I'm not sure how to reply to setup questions since I want to keep my SQL Server 2000 intact.
View 5 Replies View RelatedI want to know if there is Desktop edition for SQL 2000 Server and if so does it comes bundled on the same CD like it did for MSS 7.0.Also is there a limit to the size of DB's that can be build with it.
Thanks a Bunch
Hey guys,this may be a stupid question but i have to ask it nonetheless becausei'm just not sure. Ok here goes, if I purchase for example SQL Server2000 Ent 1 Proc [USA edition] , will I have any problem with installingit if in UK, i plan to move there soon, the only issue i can think ofis support, evertyhing else should be the same, right? Any help wouldbe appreciated, Thanks in advance
View 2 Replies View RelatedI have a SQL cluster that is using SQL 2000 developer
edition on both nodes - I need to bring these servers into production, the
question is how do I upgrade Developer edition to Enterprise edition?
I have been told it€™s a simple REG change? but can't find it on any forum. Or
do I need to de-install and reinstall the correct version - Any help is appreciated.
Thanks all in advance
I need to buy SQL Server 2000 Developer Edition.
Both Windows Marketplace and Amazon.com sell SS 2005 Dev, and I bought it, but I also need 2000 Dev.
Windows Marketplace does not have it at all, whereas Amazon.com does not sell it directly (only from resellers, and their prices are crazy).
Could someone kindly recommend where I could purchase SQL Server 2000 Developer Edition for approximately the same (same and sane!..) price as SS 2005 Dev: that is, ~$50, please?
I am trying to change password, using the code below.. The code below is in a stored proc and I am passing these parameters from a web application.....
sp_password [ [ @old = ] 'old_password' , ] { [ @new =] 'new_password' } [ , [ @loginame = ] 'login' ]
sp_password 'cust1','cust2','cust1'
Server: Msg 15210, Level 16, State 1, Procedure sp_password, Line 20Only members of the sysadmin role can use the loginame option. The password was not changed.
I made my user part of the db_securityadmin role, but that does not help...
How can I give the above mentioned permissions, so that when user cust1 logs on then he can chnage his own password from the web application as long he has given his old password correctly?
I found a problem that I want to input chinese to SQL2000. I have already change the data type to "ntext" and for the ASP webpage I have chose the encoding to "big5". But the problem is I can't insert chinese string to the database from ASP.
Can anyone help??
Thanks!!
I need to change the name of the SQL Server on my development machine. Myclient's server name is "Server1". My development server name is"MachineName1ServerTest".I am writing a Visual Basic application. Everything is working great on mydevelopment system, but I have to go in a change the connection strings.Each time I change one, it takes about a couple minutes for the prompt tocome back saying it timed out trying to find the server. I want to renamemy server to be the same as my client's server so I won't have this time outannoyance in my development environment.I did a sp_dropserver and sp_addserver, but that does not change the machinename of the server. Thanks in advance for any help.
View 3 Replies View RelatedHow can I change sql server name 2000? It was accidently installed using "local" as name
Thank you
Our network guys created a new domain as part of their migration from NT4 to active directory. They are asking us to modify our sql servers (2000) to use the new domain accounts. For example domain1/user is now domain2/user. Once this is complete the old domain will be disabled. My question is how difficult is this to accomplish in SQL? SQL has startup accounts, logins, DTS packages, Scheduled jobs, maintenance plans, etc. It seems to me that this is a major effort? Any help on the do's and don'ts would be greatly appreciated. Any articles would be helpful too. I could sure benefit from anyone who has been down this path before.
View 1 Replies View RelatedI am currently using MS Access for my site and am ready to move on.
I have obtained (legally) SQL Server 2000 Developer Edition.
Before I install this on my pc to learn this new tool and begin adjustments to my site, I have an important question, If I can phrase it correctly.
1. Will this set up my pc as a SQL server as well as keep the current configurations?
2. I have some projects I would like to keep using MS Access, how would this effect it?
3. I have never created a database using SQL or MySQL, any suggested tutorial links?
Thanks,
Zath
<has new toys now :) >
Can we install SQL Server 2000 Standard Edition on Win XP professional?
Thanks
** Error in msgbox : “Setup failed to configure the server. Refer to the server error logs and C:WINDOWSsqlstp.log for more information. �
** Cut From: C:WINDOWSsqlstp.log – ( previous exit codes look OK) ---
(previous text removed) …
21:54:29 C:Program FilesMicrosoft SQL Server80ToolsBinncnfgsvr.exe -F "C:WINDOWSsqlstp.log" -I MSSQLSERVER -V 1 -M 0 -Q "SQL_Latin1_General_CP1_CI_AS" -H 66364 -U sa -P
Starting Service ...
SQL_Latin1_General_CP1_CI_AS
-m -Q -T4022 -T3659
Connecting to Server ...
driver={sql server};server=cn91909-a;UID=sa;PWD=;database=master
[Microsoft][ODBC SQL Server Driver][Shared Memory]General network error. Check your network documentation.
[Microsoft][ODBC SQL Server Driver][Shared Memory]ConnectionRead (recv()).
driver={sql server};server=cn91909-a;UID=sa;PWD=;database=master
[Microsoft][ODBC SQL Server Driver][Shared Memory]General network error. Check your network documentation.
[Microsoft][ODBC SQL Server Driver][Shared Memory]ConnectionRead (recv()).
driver={sql server};server=cn91909-a;UID=sa;PWD=;database=master
[Microsoft][ODBC SQL Server Driver][Shared Memory]General network error. Check your network documentation.
[Microsoft][ODBC SQL Server Driver][Shared Memory]ConnectionRead (recv()).
SQL Server configuration failed.
###############################################################################
21:54:55 Process Exit Code: (-1)
21:57:07 Setup failed to configure the server. Refer to the server error logs and C:WINDOWSsqlstp.log for more information.
21:57:07 Action CleanUpInstall:
21:57:07 C:WINDOWSTEMPSqlSetupBinscm.exe -Silent 1 -Action 4 -Service SQLSERVERAGENT
21:57:07 Process Exit Code: (1060) The specified service does not exist as an installed service.
21:57:07 C:WINDOWSTEMPSqlSetupBinscm.exe -Silent 1 -Action 4 -Service MSSQLSERVER
21:57:07 Process Exit Code: (0)
21:57:07 StatsGenerate returned: 2
21:57:07 StatsGenerate (0x0,0x1,0xf000000,0x200,1033,303,0x0,0x1,0,0,0
21:57:07 StatsGenerate -1,debbie)
21:57:07 Installation Failed.
I am running Win2k Professional version SP2. I tried to install the SQL Server 2000 Standard Edition, I got error message said " MS Sql Server 2000 Standard Edition server component is not supported on this operating system. Only client components will be available for installation."
View 1 Replies View RelatedI have to creat virtual server. Then I Can't install sql server 2000 enterprise edition on winXP. What should i do? What do you think
View 1 Replies View RelatedFor testing purposes only, I'd like to install SQL Server 2000 Evaluation Edition on a server. From what I've read, this edition is a full Enterprise Edition, but it will expire after 160 days. But is it a full edition in the sense that users can connect to it when it's installed on a server, like if it was the Enterprise Edition? So far, I've only had it installed at local computers outside any network.
View 6 Replies View Related
I am currently trying to migrate to a new computer. My old computer (Box 1) has Windows 2000 Ver 5.0 SP4 as an operating system. My new computer (Box 2) has Windows XP Professional Ver 5.1 SP2 as an operating system.
Currently, I have Microsoft SQL Server 2000 running on Box 1. When I used the CD to install the software on Box 2, it will not allow a full install. Just the Client portion. The exact message I get is "Microsoft SQL Server 2000 Standard Edition is not supported on this operating system. Only client components will be available for installation.
How in the world do I get this software to install on Box 2? I've seen and downloaded, the service packs but I don't know where to go from there.
Thanks in advance for any help that you can provide.
Can someone help me with the following... My SQL server disk says standard edition on it, my invoice for the license says standard edition (granted it's expired according the license site) but when I go to the machine and right click on the local DB properties it says it's personal edition...
I am confused how this can be.. Any thoughts ?
The only way I figured this out was because we kept getting the you have exceeded your limit of 8 concurent queries...
Thanks