SQL 2000 Publisher And SQL 2005 Suscriber
Dec 21, 2005Where can I found information on how its works and how to do it?
I tried to do it but I always received an error message
ADVERTISEMENT
SQL 2000 SP 4 Publisher To SQL 2005 Distributor
Aug 6, 2007Hi - hoping some folks here can help me. I've got a SQL 2000, Service Pack 4 database that I need to publish, but I'm getting the following error on the exec sp_addpublication statement when I try to set up publication in Management Studio:
Msg 8526, Level 16, State 2, Procedure sp_addpublication, Line 802
Cannot go remote while the session is enlisted in a distributed transaction that has an active savepoint.
I also tried to set up the Publisher in Enterprise Studio, on the theory that the system sproc was not backwards compatible, and there I got this error:
Error 627: Cannot use SAVE TRANSACTION within a distributed transaction
There is one proc in the publisher's database that uses SAVE TRANSACTION, but it isn't currently being run and it isn't dependent on the table being published. Has anybody else encountered this? Any ideas about how to make this go away?
(publisher Sql 2000)-(distributor 2005):problem
Aug 29, 2007hi,
Im I want to configure my sqlserver 2005 server as both subscriber and distributor for transactional replication purposes.
I want to configure the sql server 2000 as the publisher.
When I try to configure the publisher in the sql 2000 server, Im not being able to establish the connection with the distributor 2005 sql server in any of the 2 possible cases.
case1-Using windows authentication- message:need to use management studio or SMO
case2-Using sql server authentication-message:authentication failed
Question:
Is it possible at all to do this? or should I make the distributor to reside in a sql 2000 server?
thank you
32-bit SQL 2000 Publisher And SQL 2005 64-bit SQL Distributor And Subscriber
May 16, 2006For transactional replication, are there any issues and is it even possible to have 32-bit SQL 2000 publisher and SQL 2005 64-bit distributor and subscriber? Thanks
View 1 Replies View RelatedSQL 2000 As Publisher And SQL Express 2005 As Subscriber?
Jan 21, 2006I want to have transactional replication setup with SQL 2000 as a publisher and SQL Express 2005 as a subscriber? Where can I get some documentation around that?
Basically, the problem I am stuck with is that while registering the subscriber in SQL2000, SQL2000 cannot recognize my SQL Express 2005 instance as a subscriber. I have tried both SQL Ent. Mgr. and sp_addsubscription.
Please help.
Thanks,
Rupak Ganguly
SQL 2000 (publisher && Distributor) &&<&&> SQL 2005 (subscriber) - Is It Possible
Jul 30, 2006We have a SQL 2000 Server (publisher & distributor) with around 15 databases being replicated (all using merge replication).
My question is the following:
Is it possible to perform Merge replication from a SQL 2000 (acting as the publisher & distributor) to a SQL 2005 server acting as the Subscriber)?
If anyone has a link to any instructions somewhere that would be great.
Thanks
SQL Replication: 2005 (Publisher) And A 2000 (Subscriber)???
Sep 25, 2006Hi,
I was wondering if it is possible to setup replication between a 2005 SQL Publisher and a 2000 SQL Subscriber? Is there any special setup steps I need?
Thanks so much,
David
Transactional Replication From SQL 2000 Sp4 Publisher/distributor To SQL 2005 Sp2 Subscriber
Jun 26, 2007Hello,
Are there any requirements that dictate the SQL Server version for the distribution agent for a SQL 2000 publisher with a transactional push subscription to a SQL 2005 subscriber?
Thanks in advance,
John
Error While Changing Custom Resolver Between 2005 Publisher And 2000 Subscriber
Sep 25, 2007Hi all,
here is the context of our problem:
- Publisher :
version SQL Server 2005 SP2
table in SQL Server 2000 (80) compatibility level
publication in SQL Server 2000 compatibility level
- Distributor : SQL Server 2005 SP2
- Subscriber : SQL Server 2000 SP4 + hotfixes (version 8.00.2187)
There is only one article in our publication (a simple table with a GUID and a nvarchar(50) columns), and we have left the default resolver.
1 - The first synchronization of the subscription is successfully completed, and it is the same for the different updates/inserts/deletes or conflicts.
2 - Then we change the Resolver of our article by our own COM-Based Custom Resolver (developped in C# 2.0). This resolver only change the default behaviour: the subscriber always win (this is for a test, in the future we will have a complex business logic). All the synchronizations works fine and do what we want in the conflicts.
3 - We rollback the resolver to the default one... and here is the problem!
The synchonizations stop to work correctly. For all of them we've got the same error:
Code SnippetReplprov.dll , 2007/09/25 14:26:07.591, 4000, 16890, S1, ERROR: ErrNo = 0x80045017, ErrSrc = <null>, ErrType = 8, ErrStr = The schema script '
declare @cmd nvarchar(1000)
set @cmd='exec sys.sp_MSchangearticleresolver @article_resolver=@ar, @resolver_clsid=@rc, @artid=@ai, @resolver_info=@ri'
exec dbo.sp_executesql @cmd, N'@ar> nvarchar(255),@rc nvarchar(40),@ai uniqueidentifie..." mailto:N?@ar">N'@armailto:N'@ar">N'@ar</A< A>> nvarchar(255),@rc nvarchar(40),@ai uniqueidentifie...
It is no more possible to synchronize this subscription... Any remark will be helpfull cause we did not find anything on the net concerning this error.
Thanks a lot!
Unable To Create Subscriber On A 2000 Server From A 2005 Server Publisher
Dec 1, 2006Hi,
I'm trying to set up a transactional replication from SQl Server 2005 to SQl server 2000. The Distributor and the publisher are on our server and the subscription is supposed to be on a SQL 2000 server on a different location. Before upgrading to 2005 I didn't have problems - the replication from 2000 to 2000 was working perfectly.
After I succesfully created the distributor and the publication the first problem that I encountered was that when I tried to create the subscription it was giving me an error that I cannot use an IP to acces the server. I realized to fix that issue by creating an Alias in the SQL Server Configuration Manager for the server where I wanted to create the subscription (a push subscription).
Now when I try to add the subscriber it gives me another message "Execute permission denied on object 'sp_MS_replication_installed', database 'master', owner 'dbo'" - so I cannot create the subscriber.
The user that I use to create the subscriber on the 2000 server is dbo for the subscriber database but it doesn't have rights on the master database. Also I realized that on the 2000 server I still have the old subscription but I cannot delete it - for the same reason - no access on the master database. Before upgrading to 2005 I had the exact same rights on the 2000 server.
Any help would be appreciated.
Thanks.
Can SQL Server 2000 Publisher Work Normally With SQL Server 2005 Subscriber ?
Nov 8, 2005or is there any resource about it?
View 3 Replies View RelatedMerge Replication Downloading Old Data To The Suscriber
Oct 16, 2006I'm having an error with merge replication my suscriber are downloading old data, all this start happen after I install SP4.
let explaint this with more details ,
if a made an update to a row in a table from the publisher , the agent history show that 1 change have downloaded to the suscriber, a put an audit in the suscriber and yes one update was downloaded but the row still the same, look like the suscriber downloaded old data instead of the curent change that i made.
If i delete the row, the rows gets delete at the suscriber, if a insert the row the row get insterted ok.
The problem only happen with rows inserted at the suscriber, that later on get update at the publisher. My suscriber has MSDE 2000 SP3 an my Server has SQL Enterprice 2000 SP4.
Any help would be apreciate. thxs.
Replication 2000 - What If Publisher Dead
Feb 12, 2004What if a Publication and Distribution server machine fail to work. Do I need to reinitiliaze the whole snapshot on a new machine and retransmit the data to the subscriber. Or can I make use of replication script to recreate the publication and distribution and then replicate to existing subscriber using same machine name?
Thanks
Replicar SQL 7 ( Publisher ) Y SQL 2005 ( Subscriber )
Sep 27, 2006Quisiera saber si se puede y como llevar a cabo la replicación con SQL 7 (Publisher) y SQL 2005 (Subscriber). Desde ya muchas gracias.
View 4 Replies View RelatedReplication - DB2 As Publisher - SQL 2005 As Subscriber
Sep 14, 2007
I have been looking for a way to replicate data from a DB2 system running on an AIX machine. I found some information related to doing this with SQL2000, but not with 2005. Can this be done - preferably without writing our own provider.
Thanks in advance
Moving A SQL2K Publisher To A SQL 2005 Instance.
Sep 30, 2005Hi,
View 17 Replies View RelatedOracle 10g R2 To Sql Server 2005 - Publisher Set Up Error
Jun 7, 2007I am receiving the following error message when trying to create a new Oracle Publisher.
Msg 21684, Level 16, State 1, Procedure sp_ORACheckAdminPrivileges, Line 136
The permissions associated with the administrator login for Oracle publisher 'NT02' are not sufficient.
We have added the following permissions manually (not through a role) in Oracle:
CREATE PUBLIC SYNONYM and DROP PUBLIC SYNONYM
CREATE PROCEDURE
CREATE SEQUENCE
CREATE SESSION
CREATE ANY TRIGGER.
CREATE TABLE
CREATE VIEW
And we have also tried the Program FilesMicrosoft SQL Server<InstanceName>MSSQLInstalloracleadmin.sql script.
In both cases we are receiving the error message above. The only way we seem to be able to get around the error is to grant the DBA role to the replication schema user, which doesn't seem right.
Has anybody run into this problem before? How did you get around the problem?
Also is there a way to view sp_ORACheckAdminPrivileges because it's doesn't seem to be viewable anywhere in the database? This would at least let us know what it's looking for from an Oracle standpoint.
Help would be appreciated.
Thanks
Enterprise Publisher To Express Subscribers (2005)
Nov 18, 2005I implemented a merge replication publication on a SQL Server 2005
View 6 Replies View RelatedProgrammatically Reinitializing Merge Subscription From Publisher - SQL 2005
Sep 4, 2007From the SSMS GUI it is possible to re-initialize one or all subscriptions to a merge publication. This is done at the publisher.
How can I achieve these operations programmatically?
In particular, how do I initialize a single merge subscription from the publisher?
I have looked at the documentation for sp_reinitmergepullsubscription but it says that this proc must be run at the subscriber - which isn't much use when subscribers are disconnected for the majority of the time
I have a large number of merge subscribers and want to reinitialize all except one
aero1
SQL 2005: Transactional Replication &> Executing Sp On Subscribershould Execute On Publisher
Jan 16, 2008Hi,I am trying to set up a Updatable Subscriptions for TransactionalReplication with SQL 2005 (queued updating).I have a stored procedure "SYS_spShellTest" which is replicated to thesubscriber viathe replication option "Execution of the stored procedure":-------------------------------------------------------------ALTER procedure [dbo].[SYS_spShellTest] @cmd varchar(1000)WITH EXECUTE AS ownerasBEGINEXEC @result = master..xp_cmdshell @cmd, NO_OUTPUTReturn (@result)END-------------------------------------------------------------1) If I call "exec SYS_spShellTest" on the publisher the call is alsoexecuted on the subscriber.2) If I call "exec SYS_spShellTest" on the subscriber the call is NOTexecuted on the publisher.How can I make 2) work so that it is also executed on the publisherplease?Thanks a lot,Patrick
View 1 Replies View RelatedPublisher Is Empty Under Replication Monitor - Publisher.! But Replication Is Still Running Fine..
Nov 9, 2006I have a wired situation..!I set up transactional replication on one of my development server (SQL2000 Dev Edition with sp4).It is running fine without any issues and all of a sudden, i noticed inmy repication monitor tab under Publisher where I usually see thepublication is empty now.I do see the snapshot agent, log reader and distribution agent under myagents inside the replication Monitor. But its usefull to see all 3agents in one window under publisher before. What happend? Is there anyway to get that inside that monitor? Has someone encountered thissitation before? Please advise....After that I tried to create a new set of replication on differentdatabase on the same server and i dont see those either underReplication Monitor - Publishers....All it says is (No Items)....I would appreciate any help to correct this issue... Thanks in advance..
View 2 Replies View RelatedInstall Sql 2005 Instance With Reporting Service 2005 On Sql 2000 With RS 2000 Server
Aug 18, 2006Hi
We would like to install Sql 2005 Enterprise Edition (including database engine, reporting service, integration service and analysis service) as a sepearte instance on a server which already has Sql 2000 with reporting services and analysis services. We do not want to disturb the existing sql 2000 setup.
If we do that then what will happen to my earlier sql 2000 reporting service? Will it be upgraded to sql 2005 reporting service? I heard that reporting services are instance unaware application. Where will be the default reporting service database available?
Please help us.
Regards,
Sankar N
SQL 2005 Thinks A SQL 2000 Backup Is Corrupt, But SQL 2000 Restores Just Fine
Jul 19, 2007I am attempting to move some SQL 2000 databases to SQL 2005. My main production database does not seem to want to move. When I use the SQL 2005 GUI the .bak backup file is marked 'Incomplete'. When I attempt to restore the backup file I get a 'RESTORE detected an error on page (0:0) in database' message. I saw a thread in the SQL Express forum suggesting trying to restore from the T-SQL level to get the GUI out of the picture and I get the same 'error on page (0:0)' message. However when I take the same file and use SQL 2000 Enterprise Manager it restores with no problems.
Any ideas?
Thanks
Mike Mattix
Bit-data From SQL Server 2000 (2005 Working, 2000 Doesn't)
May 19, 2008Hi, I am trying to edit some data from a SQL2000-datasource in ASP.NET 2.0 and have a problem with a column that has bit-data and is used for selection. SQL2005 works fine when declaring <SelectParameters> <asp:Parameter DefaultValue="TRUE" Name="APL" Type="boolean" /> </SelectParameters>When running this code with SQL2000, there are no error-msgs, but after editing a record the "APL"-column looses its value of 1 and is set to 0. Looks like an issue with type-conversion, we've hit incompatibilities between SQL200 and 2005 with bit/boolean several times before. So, how is this done correctly with SQL2000? (I've tried setting the Type to "int16" -> err. Also setting Defval="1" gave an err) ThanksMichael
View 2 Replies View RelatedProblems With SQL 2000 And 2005 On Same Machine - Can't Connect On 2000
Mar 13, 2006Hi,i have SQL 2000 and 2005 on same machine(with different intance names,of course), my laptop - XP with SP2. The 2005 works fine but i can'tconnect on SQL 2000. All the the SQL services are started.Any idea? Have i to reinstall 2000?Tks,Lourival
View 1 Replies View RelatedMerging 2000 And 2005 Databases, Save As 2000
Apr 30, 2008I have to merge the data from two databases, one is in SQL Server 2005 format, one is in 2000. The merged data will then reside on a SQL Server 2000 platform. Is there an easy way to do this through Management Studio or Enterprise Manager? Or will we have to export the data from the 2005 database to a flat file and import it into a new 2000 database. And then do the merge?
TIA
Log Shipping From 2005 In 2000 Compatibility Mode --&&> 2000 Can I Do This?
Dec 18, 2007I am in the process of migrating from Sql Server 2000 to 2005. Part of my plan is to move some database's to 2005, but use the 2000 compatibility mode for the short term. My issue is this, our DR boxes are still on SQL Server 2000, would I still be able to use our log shipping processes? Or would I be better off in starting with migrating the DR boxes to 2005 first?
Thanks in advance.
SQL 2000 To SQL 2005 Works For One 2000 Server But Not The Next
Jun 15, 2006
I have several SQL 2000 servers I need to setup transactional (non updatable) replication with. The structure is:
SQL Server 2000 as Publisher/Distributor
SQL Server 2005 Standard as Subscriber
The connection is via the Internet with snapshots using FTP.
I setup the first set (2 databases at location A). They work wonderfully. I created the publication and then subscribed using MGMT Studio for 2K5.
II am setting up the same scenario for location B. Here is my problem:
In MGMT Studio I connect to the publisher (SANDRA). I right-click a publication and choose New Subscriptions..., the publication is already selected. I click next - Run each agent at its Subscriber is selected and the only option (this is desired), I click Next
HERE IS THE PROBLEM:
On the Subscriber's screen there are no Subscribers listed. When setting up location A the subscribing server was listed and I could choose a database. The Next button is greyed out and there is no way to create/add one.
I tried setting up the subscription by right-clicking the subcribing server's Replication folder in MGMT Studio but I get the same result (except that I have to authenticate with the publishing server which works fine).
WHAT'S DIFFERENT:
Location A is SQL Server Standard (SP3) running on SBS2K3. It is obviously on a domain and so SQL Server and the SQL Agent are running under domain accounts. Location B is a Windows XP SP2 machine running SQL Server Personal Edition (it actually says Development Edition in the properties window).
The databases are the same strucutre, different data. At location A the firewall is set to allow 1433->*any* and *any*->1433 where *any* is 1024 or higher. On the XP machine the firewall is set to allow port 1433. I don't think this is the issue because I've turned the firewall off on the XP machine and I get the same result.
ANY IDEAS?
Sql 2005 Sql 2000 DB Diagrams, Re-install Sql 2000, Need Help.....
Jan 19, 2007Most of our sql servers ar still sql 2000. Our programmers created many sql 2000 database diagrams using EM. But they can not access them under sql 2005. (They now have only sql 2005 tools installed on their boxes.)
Question: can we reinstall the sql 2000 client tools on their boxes without affecting the current sql 2005 install on their boxes?
Question: is there any workaround negating the need to ihstall the sql 2000 client?
TIA,
barkingdog
VS 2005/SQL Server2005 - Direct Connection From Win Mobile Emulator To Desktop SQL Server 2000 Or 2005
Aug 10, 2007Hello Everyone,
I'm trying to connect to Desktop SQL Server 2000 from Windows mobile PC Emulator (VS 2005). I need a direct connection using connection string to SQL Server 2000 through local wireless network without IIS.
Bellow is the code that I use. After executing this code I get an error on line Conn.Open(). Error says SQL Server does not exist or access denied.
SQL is un and running, and I can log in using SA username from the desktop. Even if I chance IP for another SQL server in my connection string I still get the same error. There is no firewall of any kind running.
Dim connectionSTR As String = "Persist Security Info=False;Integrated Security=False;Server=192.168.0.202,1433;initial catalog=MyDB;user id=sa;password=;"
Dim Conn As SqlConnection
Conn = New SqlConnection(connectionSTR)
Conn.Open()
If Conn.State = ConnectionState.Open Then
MessageBox.Show("Open")
End If
About my environment: SQL Server 2000 is running on Desktop PC with Windows XP SP2. Application which I need to connect to SQL Server is in Visual Studio 2005. I execute the application in Windows Mobile PC Emulator and try to connect to SQL Server from emulator.
Your advice and help is very appreciated
Thank you
Ika
Load Backup From 2000 To 2005 Or Recreate Structure On 2005?
Apr 23, 2008Hello,
I would like to ask you if there is better to recreate database structure on 2005 from 2000 and move data or to just load
2000 backup.
Currently I loaded the backup, but I am wondering if there might be slightly better performance on 2005 when recreating structure on 2005 to loading 2000 backup?
Does loading 2000 backup create 2005 binary structure?
Thanks for help in advance
Publisher Goes Down - Replication
Aug 25, 2004What happens when Publisher goes down in Transactional
Replication, no corruption (power , hardware failure)??
Thanks,
John
Add New Article To The Publisher
Jun 19, 2008Dear All,
i'm in the transactional replication environment. we need to add one new table to the publisher. it is sql server 2005 environment. please explain me the steps
and in another table, i need to change the data type of a table.
please guide me
Arnav
Even you learn 1%, Learn it with 100% confidence.