i 've tried to run this part of query it gives a problem like : unauthorised trasaction in Databasename errors
At Server1
Use
DatabaseName1
BEGIN TRAN
INSERT into Server2.Database2.dbo.TableName2
SELECT * FROM Server1.Database1.dbo.TableName1
END
can anybody help me ?
Hi,
Just upgraded some development desktops to Vista Business. However we need
to still connect to some older remote windows 2000/SQL 2000 servers.
Trying to setup an ODBC system DSN on our Vista Business local desktop we get the
following errors -
-START ERROR WINDOW-
Connection Failed:
SQLState: '01000'
SQL Server Error: 772
[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]ConnectionOpen
(SECDoClientHandshake()0.
Connection failed:
SQLState: '08001'
SQL Server Error: 18
[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]SSL Security Error
-END ERROR WINDOW-
Any help greatly appreciated as this is stopping us from making
database/table connections etc. We've checked the firewall setup and all is well there.
PS - we can still connect fine using XP or windows 2000 desktops and their
local DSNs.
One of my clients is upgrading to Sql 2000. I currently administer her server using a SQL 7 interface but I will need to upgrade that interface to sql 8 now to be able to give her the same level of support. How do I go about installing the required clients on my desktop in such a way as to not interfere with my own installation of MSDE?
I use Windows NT workstation 4. If I have a choice do I install developer's edition of SQL2000 or personal edition?
We also have pcanywhere access but this is too slow and unsure for my money.
Thank you,
Bo Graham
I installed MS Sql server 2000 having Typical type setup.
I choosed Local system account in service setting & mixed mode authentication mode. I choose default Tcp/Ip port 1433 which is free.
After successful installtion i tried
telnet localhost 1433
But gaves the error :
"Could not open connection to host on port 1433" Connection failed.
So should i do for remote or telnet connection.
Please help me!
I get the following error message in quotes. I have a web application written in ASP.NET 2.0 through which I am trying to connect to a remote SQL Server 2000. My operating system is Windows Vista .
I looked at many different sites to find a solution for this but without any luck. I am sure someone would have seen this issue here and I expect them to shed some light.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server).
The connection string is located in my web.config file which looks like
<add name="AMSConn" connectionString="Data Source=xxxx;Initial Catalog=testdb;User ID=sa;Password=xxxx" providerName="System.Data.SqlClient" />
I want to get this issue resolved and I need you guys help.
Please let me know if you need any more information.
Thanks
Bharat
My environment is Windows Server2003, ASP.NET 2.0, SQL Server 2000 using SQL authentication (names of DB's, sql id's, passwords are identical on both servers)
My web application successfully connects to my database the web app and the DB are both on the same server (10.144.25.9).This connection string works:
<add name="DefaultDataTierConnectionA" connectionString="Data Source=10.144.25.9,1433; Network Library=DBMSSOCN; Initial Catalog=9D_SQL; User ID=******; Password=******" providerName="System.Data.SqlClient"/>
PROBLEM:
The problem occurs when the DB is mpved to the remote SQL Server (10.144.25.10). I use almost the identical connection string except for the IP address which is changed to the remote machine. The db name, user, password is same on remote machine as on the local, so everything should work but does'nt. This connection string fails:
<add name="DefaultDataTierConnectionA" connectionString="Data Source=10.144.25.10,1433; Network Library=DBMSSOCN; Initial Catalog=9D_SQL; User ID=******; Password=******" providerName="System.Data.SqlClient"/>
error (odd error in that I'm connecting to SQL 2000?) -
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)
There is no DBA on this project, I'm not sure this is a SQL Server set up problem?
Hi guys
Apologies if this is the wrong place to be posting this but I have posted on a few forums and have not had any usable answers to this question, so I am hoping you guys will be able to help me.
I have 2 servers that are on the same domain. My ASP.NET application is running off the first which has .NET 2.0 installed, and I have an SQL Server 2000 db on the other. Whenever I try to connect I get the following error:An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
The connection works when I run the project in VS Development Server on my work computer, but as soon as I upload to the server I get this error.
I have scoured Google but all of the sites I come across are for SQL Server 2005 and are just not suitable for solving the issue on 2000.
Any help would be greatly appreciated as I cannot continue my current project until this issue is resolved.
Hermiod
I'm experiencing a problem connecting to a SQL 2000 server through my ASP code. My connection string is as follows:
<add name="TheConnectionString" connectionString="driver={Sql Server};provider=MSDASQL;server=10.0.1.42;database=dbname;uid=*********;pwd=*********" providerName="System.Data.Odbc" />
The problem doesn't occur when I run my ASP code from my workstation using VS.NET's builtin webserver. It makes the connections and executes the CRUD commands successfully. However, when I publish my site to the webserver (which resides on 10.0.1.16) it fails out with the following error:
System.Data.Odbc.OdbcException: ERROR [08001] [Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.ERROR [01000] [Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()).
I've verified that the webserver can talk to the DB server by connecting to the remote DB server through SQL Enterprise Manager running locally on the webserver. If I try to do this with a DSN I get the same results. I get the same error from any other webserver on the internal network. The difference between my workstation and the internal network is that I'm using a VPN to connect to our internal network while the webservers are physically connected to it. Firewalling isn't the issue in this case because the webservers and DB server are on a trusted network. I've seen other ways of connecting to the DB server including using Named Pipes (which I would rather not do because I don't want to setup a named pipe on the production db server).
I'm relatively new to ASP.NET 2.0, so the above connection string is an adaptation of some old ASP code. If anybody has any suggestions on a better way to construct this connection string, please let me know. I've been racking my brains trying to get this to work outside of the devel env.
I have a SQL Server 2000 cluster running on x64 OS. I found the threads in the forum to run perfmon locally by using the x86 version of perfmon (mmc /32 perfmon). However, I cannot run a perfmon remotely from another machine and see the SQL Server perfmon data on any of the nodes in the cluster. The remote perfmon picks up all of the other perfmon variables but no SQL.
I found another thread where somebody asked this question but it wasn't answered. Thanks in advance.
Mark
Hi!!
I'moving my asp application to a new hosting server.
So when i tried the setup locally with the live DB & application in my test machine...
The DB access is denied when application tries to hit the DB.
DB is in seperate machine with SQL Server 2000 & application(ASP) is in Windows server 2003.....
Kindly help me with your suggestions....on what went wrong?
Hello.
Has anyone attempted and successfully installed SQL Server 2000 SP4
via remote desktop on the cluster.
The reason I am asking is that SP4 readme file has this:
"...
4.3 Systems Management Server Distributed Installation
You cannot install Database Components SP4 from a remote location.
..."
Currently SQL Server has SP3a installed.
Thank you in advance.
Using ASP.net 2.0 or Visual Web Developer Edition 2005 I could not find a single example with Datagrid Control or Form View Control, to achieve the basic functionality ofAdd/Edit/Delete Records with Remote SQL Server 2000 Database. When I searched for these examples I found many videos and examples using local database and in learning path of Visual web express editions, very goodexamples and videos using local SQL Server 2005 database, BUT not with the remote database.
My question Is it possible to get the basic functionality of Add/Edit/Delete Records with Remote SQL Server 2000 Database using ASP.Net 2.0 Datagrid and FormView controls?
This question looks like, a lazy developer question!! but, in my learning path I found GREAT videos in Visual Studio Web Developer Express edition and learned simple way of drag and drop the controls assign create local database and their connections, and few clicks to add/edit/delete records using datagrid and formview controls. In real life those are not much useful because many of web interfaces are with sql server 2000 and we need to convert them into ASP.Net. Similarly I wanted to drag and drop couple of controls and less coding etc. and accomplish basic functionality of add/edit/delete records using remote database sql server 2000.
If possible please help me out.
Wondering is it possible to get the functionality of add/edit/delete records using datagrid/formview with remote sql server 2000, the way they explained in bigginers learning videos ... I am referring to (http://msdn2.microsoft.com/en-us/express/aa700802.aspx)
If possible and you think it is possible please guide me to that URL where I can learn the great functionalty n implement..!!
Hi all,I need to gain access to a remote SQL Server 2000 storing my data.The remote SQL machine can only be accessed via an internet connection,that is - it is not part of my network.I know Enterprise Manager can do the job, but EM only comes bundled inMS SQL Server, which is not installed on the client machine.Please let me know which other (preferably free) tools can performsuch remote access.Thanks,Gilad Haimov
View 1 Replies View RelatedHi,
Sorry for the wide distribution.
I'm trying to find any useful whitepapers about how to effectively build and operate a disaster recovery site at a remote location for SQL Server 2000. Does anyone know where to find such information?
I also know that one good option for my customer is using the Mirroring feature of SQL Server 2005. What are the other options? Is Replication an effective one for a mission-critical database (online banking)?
Thanks in advance
- When I disable "allow remote connections to this server" from server properties>connection page, I can still remotely connect to the server from SSMS...so what is the impact of enable/disabling it?
- what is the impact of changing the remote query timeout (on the same page) from default value?
Hello,
I have problem with my SQL server. When I want to connect from localhost, its OK. But, when i want to connect it from other computer, i will recive this message: Timeout expire. If I try connect in enterprise manager of client, i will receive SQL Server does not exist or access denied.
I have selected Mixed mode and I am not using firewall.
Some solution? please help. Thank you very much.
I am just beginning development of a new app and I need a little advice onthe best way to go about doing something.The app is a project management tool for a construction company. Users inthe field will need to do remote updates both receiving and submitting databack to the main office. I can't just make it a live web app because theusers will have to be able to work off line and sync data later (presumablywith a VPN connection).What is the best way to go about this? I planned on using MSDE 2000 w/Accessfront end. I will install MSDE on each laptop but what is the safest/mostreliable way to sync only that information which pertains to a specific useralong with other general information.Any books that helpful with this specific issue? Any one have reusablemodules/code they'd be willing to send me?TIA,--Jake
View 1 Replies View RelatedMy question is, is it possible to connect to an SQL database using the MSDE 2000 SP3a edition over the internet? And if so, how do I set it up? Thank you in advance.
View 1 Replies View RelatedPlease bare with me as I do not have much knowledge in this area with MSSQL.
I have installed MSSQL 2000 Developer and I have setup a database which I am able to connect to and work fine with from the actual server MSSQL is installed on.
The problem comes in when i try to connect to that same database from a different remote server. It will not connect to the DB from this remote server but I know all the connection information is correct so its something on the MSSQL DB server causing this and not on this remote server.
Someone I know has had this problem and has fixed it but they wont tell me how. All I know is they said something about manually opening the ports on the MSSQL server and he also said when you set it to dynamicly determine the port that MSSQL is listening on it errored out. however if you set it staticly to 1433 it worked fine.
Ive also installed SP4 in attempt to fix this but no luck with that either. And I can also get the same exact remote server to connect to completely different DB server without issues.
If anyone can please help walk me through this I would be greatly appreciate and I am also willing to pay some money if it will make my life easier.
Hi allWe have a small database that we host on our own local server. In order toget the information into the database I have a VB program that collates theinformation from a variety of sources and then over our local internalnetwork writes it to the database tables.This information is then made available over the internet using thecompanies broadband connection. In order to alleviate bandwidth issues weare looking at paying for someone else to host the database.What I am hoping to achieve is to keep the VB software, but during the nightupload the data to the remotely hosted SQL server using say a series ofupdate statements. Does anyone know if this is possible, and will SQL Serverlook after the integratory of the data. Is there any issues with therelatively low speed of then Internet as compared with a local networkenvironment. The amount of data we are looking at moving is very little,some where in the region of a few hundred records per night split over about10 tables.many thanksAndy
View 1 Replies View RelatedHi All,Im testing error handling on my website and if I stop my local sql server 2000 then run the web app, I get a SqlException which is good, but when I restart the sql server then I get a System.InvalidOperationException that will not go away. ( its coming from a ExecuteScalar() call) This happens on my remote database as well.It also happens if I kill the connection on my remote machine then reconnect. after I reconnect I can access the database using dbvis so I know its there.Am I not clearing something after the first error? If I restart the machine all is well.Thanks in advance for you help!-Keith
View 2 Replies View RelatedI am trying to add a linked server from a AMD x64 server (Windows 2003) with SQL Server 2005 64 bit to a Server running SQL 2000. These are not in the same domain.
I can create a linked server using the option "Be made using the login's current security context" but can not when trying to specify the security context, i.e. sa and the sa password. When I try I get the following message:
Msg 15185, Level 16, State 1, Procedure sp_addlinkedsrvlogin, Line 98
There is no remote user 'sa' mapped to local user '(null)' from the remote server 'DTS_FSERVER'.
I have several other x64 server that I have no problem creating a linked server and specifying sa and the sa password.
The problem with using "the login's current security context" option is that I get an error when trying to run any Jobs against the linked server. The job fails withe the following error:
Executed as user: NT AUTHORITYSYSTEM. Access to the remote server is denied because no login-mapping exists. [SQLSTATE 42000] (Error 7416). The step failed.
I'm sure the two errors are related. Any ideas what is going on?
Hello, i have a question that the sql server 2000 is install in window 2000 server. If i want to update to window 2003. Is that any problem in sql server 2000. I am worry about whether we will have problem after update. What i need to do? Many thanks.
View 5 Replies View RelatedFellow Devs,
I have an instance of SQL Server Express 2005 running on another box and I have Remote Connections enabled over both TCP/IP and Named Pipes, but on my other box I keep getting the error that the server does not accept Remote Connections.
Any ideas why this might be happening? Is there some other configuration?
if you can restore a database to Server B using Server A as the service. Meaning we would issue the command on Server A but somehow point to Server B as where we want the restore to happen.
The backup file would be in a location independent of both servers.
My site works fine in VWD2008 express, but I get this error when I try to use it on my live website.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
According to this article: http://support.microsoft.com/kb/914277 I am supposed to:
1.
Click Start, point to Programs, point to Microsoft SQL Server 2005, point to Configuration Tools, and then click SQL Server Surface Area Configuration.
Ok, there is no such program in this folder. The only thing in there is "SQL Server Error and Usage Reporting"...
The other thing I am greatly concerned with is this: All is want is for my webpages to be able to access my database for user authentication. I DO NOT want to grant the internet rights to remote connect to my database.
i did "Linked server" between To Servers , and it's Working.
---------------------------
For Example :
Server 1 =S1.
Server = S2.
i create table in S1 : name = TblS1
i create same table in S2 : name TblS2
and i create trigger(name tr_cpD) From S1 in TblS1 For send data To TblS2 in S2
/****************** trigger Code ***************
CREATE TRIGGER dbo.tr_cpD
ON dbo.TblS1
AFTER INSERT
AS
BEGIN
SET NOCOUNT ON;
insert into [S2].[dbname].[dbo].[TblS2] Select ID,Name from insertedEND
**************************************************
result is :
Msg 7399, Level 16, State 1, Procedure tr_cpD, Line 14
The OLE DB provider "SQLNCLI" for linked server "S2" reported an error. The provider did not give any information about the error.
Msg 7312, Level 16, State 1, Procedure tr_cpD, Line 14
Invalid use of schema or catalog for OLE DB provider "SQLNCLI" for linked server "S2". A four-part name was supplied, but the provider does not expose the necessary interfaces to use a catalog or schema.
how i can execute this trigger
I get the following error and have been trying to figure out why I keep getting it. Initially, I had placed my project under wwwroot folder and ran it under IIS and it gave this error. Then I moved it to my local C drive and same thing. I am sharing this project with two other co-workers and all our config files and code files are same...they don't get this error but I do. I checked that SQL Server Client Network Utility has TCP/IP and the 'Named Pipes' enabled. I thought maybe I have setting in the Visual Studio 2005 that I'm not aware of that's causing this problem...it can't be the server since my co-workers aren't having this error and can't be anything in the code since all of us are sharing this project through vss. I dont' think using different version of .net framework can create this error. I changed the version from 2.0 to use 1.1x and it gave same error... Any help would be greatly appreciated. Thanks in advance.
Server Error in '/RBOdev' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +685966
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +109
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +383
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84
System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197
System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.GetConnectionHolder() +16
System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.LoadPersonalizationBlobs(WebPartManager webPartManager, String path, String userName, Byte[]& sharedDataBlob, Byte[]& userDataBlob) +195
System.Web.UI.WebControls.WebParts.PersonalizationProvider.LoadPersonalizationState(WebPartManager webPartManager, Boolean ignoreCurrentUser) +95
System.Web.UI.WebControls.WebParts.WebPartPersonalization.Load() +105
System.Web.UI.WebControls.WebParts.WebPartManager.OnInit(EventArgs e) +497
System.Web.UI.Control.InitRecursive(Control namingContainer) +321
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +692
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
Hi All,
I would like to know, how the datetime will be stored in the sqlserver datetime column.
Because some time i am giving the date in dd/mm/yyyy and sometime mm/dd/yyyy.
while give the date in mm/dd/yyyy works fine but not in the another case. and also while i execute a query on query analyser it shows the datetime in
yyyy/mm/dd format.
So anyone can please tell me how the dates will be stored in the datetime column of sqlserver database?
Thanks in Advance.
Regards,
Dhanasekaran. G
I am currently running SQL Server 2000 Standard on my production system, and I am looking to upgrade the system to Windows 2000 Adv. Server. I would also like to upgrade SQL Server 2000 Standard to SQL Server 2000 Enterprise to utilize more than 2GB of memory. Can anyone tell me what is the best way to upgrade the system, and please provide some feedback on your experiences with the upgrade. Thanks in advance.
View 2 Replies View RelatedWe are experiencing a problem with Sql Server 2000 linking to anAccess 97 file. We have two machines that link to this .mdb file, andwe recently upgraded one to newer hardware, SP3a, MDAC 2.8, etc. Thelink on this upgraded machine no longer works, giving this message:Server: Msg 7399, Level 16, State 1, Line 1OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error.[OLE/DB provider returned message: Cannot open a database created witha previous version of your application.]OLE DB error trace [OLE/DB Provider 'Microsoft.Jet.OLEDB.4.0'IDBInitialize::Initialize returned 0x80004005: ].The link on the older machine still works. We decided to tryconverting a copy of the file to Access 2000 to see if the newerpatches/drivers/whatever no longer supported 97. We set up a link onboth machines to this file, and they both work. However, on theupgraded machine, the following error is receievedServer: Msg 7399, Level 16, State 1, Line 1OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error.[OLE/DB provider returned message: System resource exceeded.]OLE DB error trace [OLE/DB Provider 'Microsoft.Jet.OLEDB.4.0'ICommandText::Execute returned 0x80004005: ].when making 1-3 connections to the the linked server, while the oldermachine supports at least 7 simultaneous queries connecting to thelinked server and still hasn't produced that error.Does anyone have any idea if there is a known issue with linking toAccess 97/2000 files under MDAC 2.8, Jet 4.0, etc? Any light anyonecan shine on this subject would be greatly appreciated.
View 1 Replies View RelatedWhat is the limitation of memory that SQL Server 2000 Standard can usewhen running on a Windows 2000 Advanced Server platform?
View 1 Replies View RelatedHi, I need to know if somebody knows like making the update of Standard SQL 2000 to Enterprise. Greetings.
View 3 Replies View Related