SQL 2000 View VS. Sproc Show Different Results
May 9, 2005
I have a sproc in my database that when editing in VS 2003 shows different results.
The sproc code is:
ALTER PROCEDURE dbo.VMUsage_GetRaw
@VMBox nvarchar,@StartDate datetime,@EndDate datetime
AS
SET NOCOUNT ON
SELECT *FROM VMRawUsageWHERE (ACCOUNT = @VMBox) AND (CONVERT(datetime, DATE + ' ' + TIME) > @StartDate) AND (CONVERT(datetime, DATE + ' ' + TIME) < @EndDate)
When I open the SQL statement in the designer and run (and enter my parameters) I get a recordset returned, but when I just "Run Stored Procedure" and enter the same parameters I get no results. The same occurs when I run the sproc from my website (no results).
Any ideas what is happening between the two?
View 1 Replies
ADVERTISEMENT
Sep 10, 2007
I have 2 Table
Authors
ID Name
1 Clint
2 Voke
Books
BookID ID BookName Price
1 1 Book1 10
2 1 Boo21 12
3 2 Book3 6
4 1 Book4 13
5 1 Book5 2
Now I want to List All Authors and only show Most Expensive book Name of each Author.
So I need this Fields :ID,Name,BookName,BookID,Price.
How could I Write SQL query For It (I want to show results in DB Without Using SP).
I want to Create NEw Views Which Shows my required Results.
thanks,
View 15 Replies
View Related
Sep 10, 2007
I have 2 TableAuthorsID Name1 Clint2 Voke
BooksBookID ID BookName Price1 1 Book1 10 2 1 Boo21 12 3 2 Book3 6 4 1 Book4 13 5 1 Book5 2
Now I want to List All Authors and only show Most Expensive book Name of each Author.So I need this Fields :ID,Name,BookName,BookID,Price.
How could I Write SQL query For It (I want to show results in DB Without Using SP).I want to Create NEw Views Which Shows my required Results.
thanks,
View 2 Replies
View Related
Mar 29, 2008
Hi,
I have a query written in SQL 2000 which returns incorrect result. The query uses left outer join and a view. I read an issue related to this in one of microsoft bug report in this article http://support.microsoft.com/kb/321541.
However, there's a slight difference in the sympton second bullet wherein instead of a expression the query returns a fixed string for one of the column value.
Although the issue mentioned in article seems to be fixed. The later one still seems to be reproducible even with Service Pack 4. However, this issue doesn't appear in SQL Server 2005.
Here's the query to reproduce this error.
Code Snippetcreate table t1 (pk1 int not null,primary key (pk1))
create table t2 (pk1 int not null,label1 varchar(10) not null,primary key (pk1))
go
insert into t1 values (1)
insert into t2 values (2, 'XXXXX')
go
create view V as
select pk1, 'ZZZZ' as label1 from t2
go
select A.pk1 as A_pk1, B.pk1 as B_pk1, B.label1 as B_label1
from t1 as A left outer join V as B on A.pk1 = B.pk1
go
This query is similar to the one mentioned in the article except that in the SELECT clause of CREATE VIEW statement I am passing a fixed value for column "label1".
I just want to confirm that this is an issue and no fix is available for this so far.
Regards,
Naresh Rohra.
View 2 Replies
View Related
Mar 9, 2007
I open two instances Sql 2005 Server Management Studio.
Instant 1 - Logon as SA
Instant 2 - Logon with User Id and Password
I have a sproc that executes a complex view (composit view that makes use of other views).
The spoc returns different results depending if it's run from SA or my User account.
I guess this is a permissions problem.
The question is ....... How do I find out which view, table, function etc. is causing the problem.
Is there a trace facility in Sql2005 Server Management Studio?
Any help appreciated.
Regards,
Paul.
View 3 Replies
View Related
Dec 16, 2003
I have a SPROC that uses various VIEWs (passed into the SPROC from an ASP.NET dropdownlist), but I'm getting "Invalid Syntax near 'View name' " errors from the browser (IE) when I execute the dropdownlist.
It appears to me that it should work. The VIEWs run fine by themselves.
When I run the SPROC in Query Analyzer, I get the following error
Server: Msg 201, Level 16, State 4, Procedure Company_List_by_Filter, Line 0
Procedure 'Company_List_by_Filter' expects parameter '@Filter', which was not supplied.
I completely removed the control and rebuilt it (Using VisualStudio.NET 2003), but still have the same error.
VS builds the code without error.
Here's the code for the event handler:
private void Select_Filter_SelectedIndexChanged(object sender, System.EventArgs e)
{
SqlConnection myConnection = new SqlConnection("server=AMD;database=imSMART;Trusted_Connection=yes");
SqlDataAdapter myCommand = new SqlDataAdapter("Company_List_by_Filter", myConnection);
myCommand.SelectCommand.CommandType = CommandType.StoredProcedure;
myCommand.SelectCommand.Parameters.Add(new SqlParameter("@Filter", SqlDbType.VarChar, 150));
myCommand.SelectCommand.Parameters["@Filter"].Value = Select_Filter.SelectedValue;
//Arbitrary table name Company_List
DataSet ds = new DataSet();
myCommand.Fill(ds, "Company_List");
Select_Company.DataSource=ds.Tables["Company_List"].DefaultView;
Select_Company.DataBind();
}
Somehow the @Filter variable is not properly getting passed by the SPROC to the VIEW.
Anyone have any ideas why this is happening?
Thanks,
Paul
View 1 Replies
View Related
Jun 15, 2001
Hi guys,
I am trying to create a view through SP
as follows, but I am getting as error as Invalid syntax near view.
Please let me know where I am doing wrong.
Thanks,Rau
CREATE PROCEDURE PurgeReport
@intJob as int
AS
if @intjob=1
begin
CREATE VIEW Purge AS SELECT Btch_id AS Batch_ID, DLN, Process,End_DLN, Job,
Tcode
FROM Batch_HDR
end
View 2 Replies
View Related
Aug 9, 2006
Could someone please tell me why the following SELECT statement...
SELECT ID, SpecimenNr, ScientificName, Locality, TaxonFROM petrander.QueryViewWHERE (InstitutionCode = 1) AND (Collectioncode = 1) AND (ScientificName LIKE N'%le%') AND (Locality LIKE N'%Fakse%') AND (22 IN (ParentID1, ParentID2, ParentID3, ParentID4, ParentID5, ParentID6, ParentID7, ParentID8))
...gives me 9 rows back, but embedding the exact same statement in the following sproc...
set ANSI_NULLS ONset QUOTED_IDENTIFIER ONGOALTER PROCEDURE [petrander].[DynamicQuery] @taxparent int = NULL, @museum int = NULL, @collection int = NULL, @binomen Nvarchar(254) = NULL, @locality Nvarchar(254) = NULLAS SELECT ID, SpecimenNr, ScientificName, Locality, Taxon FROM QueryView WHERE InstitutionCode = COALESCE(@museum, InstitutionCode) AND CollectionCode = COALESCE(@collection, CollectionCode) AND ScientificName LIKE 'N%' + @binomen + '%' AND Locality LIKE 'N%' + @locality + '%' AND (@taxparent IN (ParentID1, ParentID2, ParentID3, ParentID4, ParentID5, ParentID6, ParentID7, ParentID8))
...and passing the exact same parameter values to with the following execute statement...
USE [Geomusdb]
GO
DECLARE @return_value int
EXEC @return_value = [petrander].[DynamicQuery]
@museum = 1,
@collection = 1,
@binomen = N'le',
@locality = N'Fakse'
SELECT 'Return Value' = @return_value
GO
gives me 0 rows!? What is different!?
Any help is greatly appreciated...
View 4 Replies
View Related
Aug 21, 2006
In the below sproc I want to create a view based on the incoming parameter, which is a date passed on from VB in the format 01-01-2006.
Yet getting that to work, seems quite a challenge.
I've been dabbling a bit with the sproc and QA, passing the date parameter to it in varous forms, using both single, double and triple quotationmarks and changing the parameter type to datetime.
I either wind up with a syntax error " Incorrect syntax near '01' " or " Unclosed quotation mark before the character string ".
Anyone have a guess at how to fix this issue?
Cheers, Trinsan
REATE PROCEDURE KONTROL_DRdobbeltrapportering
@rapdato as varchar
AS
if exists (select * from dbo.sysobjects where id = object_id(N'[KONTROL_vw_DRdobbeltrappbasis]') and OBJECTPROPERTY(id, N'IsView') = 1)
drop view [KONTROL_vw_DRdobbeltrappbasis]
EXEC('
CREATE VIEW KONTROL_vw_DRdobbeltrappbasis
AS
SELECT Gramex_DW.dbo.Programhoved.[Rettet af DR],
Gramex_DW.dbo.Programlinie.Stationskode,
Gramex_DW.dbo.Programlinie.Udsendelsesdato,
Gramex_DW.dbo.Programlinie.[Udsendelses starttid],
Gramex_DW.dbo.Programlinie.Rapporteringsdato, Gramex_DW.dbo.Programlinie.Mediekode,
Gramex_DW.dbo.Programlinie.MUSANummer, Replace(Left(convert(varchar, [Gramex-ID]),11),''.'','''') AS GramexID,
Gramex_DW.dbo.Programlinie.Side, Gramex_DW.dbo.Programlinie.Tracknummer,
Gramex_DW.dbo.Programlinie.ISRC, Gramex_DW.dbo.Programlinie.Producentlandekode,
Gramex_DW.dbo.Programlinie.Spilletid, Gramex_DW.dbo.Programlinie.Minuttakst,
Gramex_DW.dbo.Programlinie.[Afregnet Station],
Gramex_DW.dbo.Programlinie.[Afregnet den],
Gramex_DW.dbo.Programlinie.[Afregnings ID], Gramex_DW.dbo.Programlinie.[Ur-opførelse],
Gramex_DW.dbo.Programlinie.Talestof, Gramex_DW.dbo.Programlinie.[Betalt af DR],
Gramex_DW.dbo.Programlinie.Kending, Gramex_DW.dbo.Programlinie.[Oprettelses ID],
Gramex_DW.dbo.Programlinie.[Oprettet den], Gramex_DW.dbo.Programlinie.[Oprettet af],
Gramex_DW.dbo.Programlinie.[Ændret den], Gramex_DW.dbo.Programlinie.[Ændret af],
Gramex_DW.dbo.Programlinie.[Eventuel delskæring], Gramex_DW.dbo.Programlinie.Plademærkenavn,
Gramex_DW.dbo.Programlinie.Katalogbetegnelse, Gramex_DW.dbo.Programlinie.Tracktitel,
Gramex_DW.dbo.Programlinie.Selskabsnummer, Gramex_DW.dbo.Programlinie.Indspilningsår,
Gramex_DW.dbo.Programlinie.Fonogramtitel, Gramex_DW.dbo.Programlinie.Plademærkenummer,
Gramex_DW.dbo.Programlinie.[Antal opførelser], Gramex_DW.dbo.Programlinie.[Rec nummer],
Gramex_DW.dbo.Programlinie.Indslagsnummer, Gramex_DW.dbo.Programlinie.[Afspillet gange],
Gramex_DW.dbo.Programlinie.[Afspillet minutter], Gramex_DW.dbo.Programlinie.Spilletidsløbenummer,
Gramex_DW.dbo.Programlinie.Pointtildelt, Gramex_DW.dbo.Programlinie.[Rettet af Gramex],
Gramex_DW.dbo.Programlinie.[Pgmkorlinie løbenummer], Gramex_DW.dbo.Programlinie.[Tape Kilde],
Gramex_DW.dbo.Programlinie.[Hoved artist], Gramex_DW.dbo.Programhoved.Produktionsnummer
FROM Gramex_DW.dbo.Programlinie
INNER JOIN Gramex_DW.dbo.Programhoved
ON (Gramex_DW.dbo.Programlinie.Stationskode = Gramex_DW.dbo.Programhoved.Stationskode)
AND (Gramex_DW.dbo.Programlinie.Udsendelsesdato = Gramex_DW.dbo.Programhoved.Udsendelsesdato)
AND (Gramex_DW.dbo.Programlinie.[Udsendelses starttid] = Gramex_DW.dbo.Programhoved.[Udesendelses starttid])
WHERE Gramex_DW.dbo.Programlinie.Rapporteringsdato >= ' + @rapdato + '
AND (Gramex_DW.dbo.Programlinie.Mediekode <> 1) AND
(Gramex_DW.dbo.Programlinie.Spilletid >= ''00:01:00'') AND (Gramex_DW.dbo.Programlinie.Stationskode <> ''TV2'') AND
(Gramex_DW.dbo.Programlinie.Stationskode <> ''TV2 ZULU'') AND (Gramex_DW.dbo.Programlinie.Stationskode <> ''TV2 CHARLIE''')
GO
View 2 Replies
View Related
Oct 29, 2007
I am trying to build a query for a report and I need both results for a column to show on the same row. The results are multiple names tied to the same account.
This is what I am trying.
SELECT
number AS 'Customer'
(case when seq = '0' then name end) as 'name1',
(case when seq = '1' then name end) as 'name2'
FROM customer
WHERE number between '600080' and '600230'
View 5 Replies
View Related
Nov 15, 2007
Why don't you folks (SQL SERVER Management Studio Team or SQL SERVER Database Engine Team) provide an option by using which I would be in a position to know what all the other objects are depended on a selected object and vice versa. That means:
When I select a Table within the SQL SERVER Management Studio if there is an option for understanding "Which all the objects (tables or views) it is depended on (I mean Foreign key and etc... kind of relations) and also Which all the objects (Tables, Views, Stored Procedures and etc...) are using this table", It would be of great help for all developers.
I can be contacted over kotis@microsoft.com
I BLOG @ http://blogs.msdn.com/kreddy
View 3 Replies
View Related
Feb 5, 2015
My query produces accurate results just produces one instance for each sales region. I am needing it to only give me one instance of each sales region and give me total counts. What should I re-write?
Code:
Select
salesmanname,
case when [state] IN ('GA', 'FL', 'AL', 'SC', 'NC', 'TN') Then 'South'
when [state] IN ('CA', 'NV', 'WA', 'OR', 'TX') Then 'West'
when [state IN ('NY', 'NJ', 'PA', 'DL', 'CT') Then 'NE'
end As [Sales Region]
[Code] ....
View 1 Replies
View Related
Aug 22, 2014
We have the below query that pulls benefit ids for employees but it will show each benefit on a separate row but we would like to have just one rows for the employee and columns for each of the benefits.
SELECT
hcd.PersonId,
hcd.PlanYear,
hcd.TaxIdNumber,
hcd.LastName,
hcd.FirstName,
hcd.BirthDate,
[code]....
View 3 Replies
View Related
Oct 19, 2015
I have made a couple of queries I want to use into a Visual studio project, Now is my problem:
All my queries have different statements. I believe the best is to show the results in a Datagridview
How to view them there? I know how to do it... but I have got about 30 queries
Here is my code so far:
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
ComboBox1.DataSource = MyDB_DevDataSet.DataSetName.
Dim connectionString As String = "Data Source=myDBmySRV;Initial Catalog=Teknotrans_dev;Integrated Security=True"
Dim sql As String = "SELECT * FROM CompanyMain"
[Code] ....
View 2 Replies
View Related
Nov 19, 2007
Hi there
We have a web application (database) that uses one field called Application and another called TicketType.
When a user fills out a ticket they can choose up to 3 levels of this field.
Eg Application, Application2, Application3
Eg TicketType, TicketType2, TicketType3
The extra two levels not being compulsory.
I am using sql server 2005 // Reporting Services
My query is as below:
SELECT Ticket.TicketNumber, Ticket.CreatedDate, Application_2.ApplicationName AS Application, Application_1.ApplicationName AS [App 2],
Application.ApplicationName AS [App 3], TicketType_2.TicketTypeName AS Tickettype, TicketType_1.TicketTypeName AS [Type 2],
TicketType.TicketTypeName AS [Type 3], Ticket.Description, Company.CompanyName
FROM Ticket INNER JOIN
TicketType AS TicketType ON Ticket.TicketTypeID = TicketType.TicketTypeID LEFT OUTER JOIN
TicketType AS TicketType_1 ON TicketType.ParentTicketTypeID = TicketType_1.TicketTypeID LEFT OUTER JOIN
TicketType AS TicketType_2 ON TicketType_1.ParentTicketTypeID = TicketType_2.TicketTypeID INNER JOIN
Application AS Application ON Ticket.ApplicationID = Application.ApplicationID INNER JOIN
Company ON Application.CompanyID = Company.CompanyID FULL OUTER JOIN
Application AS Application_1 ON Application.ParentApplicationID = Application_1.ApplicationID FULL OUTER JOIN
Application AS Application_2 ON Application_1.ParentApplicationID = Application_2.ApplicationID
WHERE (Ticket.CreatedDate >= @StartDate)
ORDER BY Ticket.TicketNumber
End result looks like this:
Application
App 2
App 3
TicketType
Type 2
Type 3
Software
Internal Apps
proACT
SW Other
Office Issues
General
Application
Click Track server
Alert (App)
Service
Network
Other
Network Fault
Software
Internal Apps
Other
User Account
New
Hardware
Network
HW Fault
Application
Click Track server
Alert (App)
Disk space
Office Issues
General
proACT
Configuration
Deployment
Software
Server Software
SharePoint
SW Fault
App Failure (Function)
Software
Server Software
SharePoint
SW Fault
App Failure (Function)
Ultimately I would like the Application (TicketType) fields to have the Master Information in it and the other two fields populated in order as well.
Can someone help please.
Please ask if I haven't explained myself.
thanks
Dianne
View 9 Replies
View Related
Feb 4, 2015
Query should only return less than 3000 records but its returning over 4M. It needs to show all duplicates records.... All the info are on the same table VENDFIl, so I used a self join but it seems to be looping..
SELECT A.FEDTID, B.VENDOR, C.NPI_NUMBER
FROM VENDFIL A, VENDFIL B, VENDFIL C
GROUP BY A.FEDTID, B.VENDOR
View 5 Replies
View Related
Oct 31, 2007
Hello Frds,
This is my query
Select Assessment_Id,Question_Id,Question_short_description,
(isnull(Answer_description,' ') + ' ' + Answer_text) as Answer
from dbo.viewX where assessment_id ='xxxx'
Pleae Note: This query is assigned to a string and passed to the database layer. So, i need the modifications with in this query.
Answer_description and Answer_text are the two different fields,
i need to embed a ":" (colon) between the two data if Answer_text is having any data
else display only answer_description.
Thanks in advance..
Phani.
View 17 Replies
View Related
Jul 18, 2007
A view I created won't show up in "views' in Object Explorer, but will only show up when I script for it (Select * from blah). It also won't go into the ODBC. why?
View 8 Replies
View Related
Jan 19, 2012
I have a view with 2 columns and 2 rows(No 1). I want to show the result with 3 columns in 1 row(No 2).
No1:
The view result :
ID | SubjectID
-- ---------
13279 | 900
13279 | 910
No2:
I want to show that result in this structure :
ID | SubjectID | SubjectID2
-- --------- ----------
13279 | 900 | 910
View 1 Replies
View Related
Jun 3, 2014
I am looking for a way to show how I can have a result set that shows a record with one item and the number of records where it was purchased or sold. Below is my sample data.
Use tempdb
go
create table #ItemLedgerEntry
(
ENTRYNO INT NOT NULL
, ITEMNO VARCHAR (50) NOT NULL
, POSTINGDATE DATETIME NOT NULL
, ENTRYTYPE INT NOT NULL
[code]....
I know something like this will give me results but I'd like to run one query.
select itemno, count(*) from #ItemLedgerEntry where entrytype = 0
group by itemno
order by count(*) desc
View 5 Replies
View Related
Jul 20, 2005
Hi thereGot a interesting problem (depends on a point of view.....).Background :-Agent (within Domino) is run daily basis which extracts data fromDomino Notes application to SQL Server 2000 database. Agent firstremoves ALL contents and then appends ALL data.Reporting Tool is SQL Reporting Services (very cool !!).Problem :-Within Domino Notes, it can have a field which is mult-value fieldi.e. contain multi valuese.g.(from Helpdesk application)!HowTo!!Access Email;!HowTo!!Access the Web;etc..Need to create a view, then use sql to create stored proc, to be usedas the dataset for report within SQL Reporting services.Format. (using above as data as example)!HowTo!!Access Email; (1 row) WWL/SDR/04023/010 (DocID)!HowTo!!Access the Web; (2 row) WWL/SDR/04023/010 (DocID)I have a unique KEY within table called DocID. The report will have 8separate datasets (i.e. using subreports), all linked back to UniqueKey. That's easy.The dataset causing me hassle is the 1 above. How do u split outvalues as separate rows ?Name of field called --> "ImpFunctionsImpacted".Also, notes expert, who's working on the agent, tell's me the data canbe split either as a comma or semi-colon.Any suggestions most welcome.
View 2 Replies
View Related
Nov 2, 2015
I have a requirement to display project start date and finish date in timescale view. The data in database table available as per below -The start date and project finish date should fill color in the timeline view as per below example, by quarters for a current financial year, last year and plus two years a head.
View 6 Replies
View Related
Nov 15, 2004
I have a table in a database that has very old and not very relational and I want to create a quick view to show the information in a better way. Let's say that the table has 4 fields : id , child1, child2, child3. I want to create a view from this table that will show two fields : id and child. So, my table currently looks like this:
id child1 child2 child3
1 sam bob chris
and i would like it like this......
id child
1 sam
1 bob
1 chris
Can anybody help me? Thanks in advance,
Bob
View 3 Replies
View Related
Mar 10, 2006
Sigh, probably simple, but somehow I just can't get it to work..
I have a complex view which generated about 9000 results, and I use
a SP to select certain results from that view. How can I modify the
results of the SP? for example I want to add a zero to every single
companynumber the SP gives me...
*it's friday, i know*
Any help would be appreciated!
/Erwin
View 1 Replies
View Related
Jul 20, 2005
Bit of an obscure one here, so please bear with me. I have two copiesof a database which should be identical. Both have a complex viewwhich is identical. I can open the views and the data is as expectedand match. I can query it in several ways as detailed below. The 5thversion of the simple query below based on the second copy of the viewfails, but works under the first copy./*1 Statement below works*/SELECT *FROM AgentHierarchyWHERE AdviserId = 6069819/*2 Statement below works*/SELECT *, AH.AdviserLastName, AH.AdviserFirstNameFROM AgentHierarchy AHWHERE AdviserId = 6069819/*3 Statement below works*/SELECT *, AH.AdviserLastName + ', '+ AH.AdviserFirstNameFROM AgentHierarchy AHWHERE AdviserId = 6069819/*4 Statement below works*/SELECT AH.AdviserLastName + ', '+ AH.AdviserFirstNameFROM AgentHierarchy AH/*5 Statement below fails*/SELECT AH.AdviserLastName + ', '+ AH.AdviserFirstNameFROM AgentHierarchy AHWHERE AdviserId = 6069819The error I get is to do with conversion of data within the view. It'sa little complex, but the view works fine. It looks to me like when Irun the 5th statement above, it re-runs the view and then finds anerror.So, I took the complex view and ran that with the data output into atemporary table with the queries above run against that, and it worksfine. The problem is that the statement I need is based around the 5thone above (part of an update statement).I'm struggling to understand why some of the queries above work andone doesn't. If you look at 3 and 5 I'd expect them both to fail. Ifit failed consistently I could get further into it.The problem is that it's a little difficult to get the view itselfchanged as it was supplied by a third party, but if it hasn't changedand the data hasn't changed then it's got to be something else causingthe problem.Anyway, as I said, it's a bit obscure, but if this sounds familiar I'dbe interested in your opinion.Thanks in advance.
View 4 Replies
View Related
Mar 25, 2008
We have a large number of applications that use various sql databases. They need to validate and do lookups of information such as employees and addresses. Currently, we load data from oracle into our main sql server and push the data out to various servers. This could perhaps be simplified with replication, but is now done with some dts packages.
We are wondering if there could be a better way to do this. We would like to go directly against oracle for the address data and to sql for the employee info.
An idea I had was to have our programmers create a web service that could be called from our .net applications. That works fine for in house applications, but some vendor applications need to see a table or view. We can write a CLR proc that can connect to the web service and provide data in table format I believe.
How could we get this into a view? I've tried creating a function that calls the proc and returns the table-valued variable to the view, but it seems the functions doesn't like using 'exec myProc' in the select_statement parameter.
I suppose we could have them make an additional connection to the lookup information, stored on a central database...they are probably doing this anyway to get to the validation db on the same server.
View 5 Replies
View Related
Nov 4, 2014
I have a view over 5 tables that has started giving unreliable results. There are three records that should be different, but in a production Access database, the view is giving three identical records where there should be three unique records. I have tested the view within SQL Server Management Studio and it gives the correct records there. But, I have attached this same view into the same Access database with two separate names. One instance of the view within Access database gives the correct records, and the other gives the incorrect (duplicated) records. I have attached screen shots that show these two separately named incarnations of the same SQL View, with the duplicated data, or the unique data highlighted.
I have also included the SQL query specs for this view.
what I can do to this view in order for it to always give us the unique records that we need, rather than sometimes the correct records, and sometimes the incorrect records.
Correct 3 records:
Incorrect 3 records:
[URL]
View 4 Replies
View Related
Apr 29, 1999
Wendy,
I do not know if you can see my reply after yours. Any way I try it here again.
In the DTS Export Wizard, after select the source (SQL Server)and destination (Excel),
I have 2 choices:Table copy or query.
When I use query, I can place my sp there, and the export works fine exactly as you recommended.
Thanks a lot.
But when I selected a table copy, I was given a "Select Source Tables" popup form, I can
see all the table names there, but can not find any views in the database. I do not know why.
Am I in the right place this time?
Thank you very much for your quick help.
Charlie
View 1 Replies
View Related
Aug 7, 2014
I have created a view thats pulling data from two different tables to combine them into one report.
table 1 lists the client code and table 2 lists the client partner and they're linked by a variable.
When running the report the result shows the client codes with their respective partner however any client codes that didn't have a partner are not displaying in the report and I need all client codes to be displayed even if there's no partner.
Is there a way I can make this display all results and if the client partner doesn't exist for it to still display as 'Null' for the partner but still display the client code?
Script:
SELECT TOP (100) PERCENT C.cltCode AS ClientCode, C.cltSortName AS SortName, C.cltTerminationDate AS [Term date], dbo.vcltAttrib6.ainTVal AS Department,
C.objInstID AS ClientID
FROM dbo.cdbClient AS C INNER JOIN
dbo.vcltAttrib6 ON C.objInstID = dbo.vcltAttrib6.ainObjectInstID
GROUP BY C.cltSortName, C.cltTerminationDate, dbo.vcltAttrib6.ainTVal, C.objInstID, C.cltCode
ORDER BY ClientID
View 2 Replies
View Related
Dec 21, 2005
Hello,I am trying to create a view that shows the followingField1: Sum of Amounts from Table AField2: Count of Amounts from Table AField3: Sum of of Amounts from Table BField4: Count of Amounts from Table B......Field3: Sum of of Amounts from Table HField4: Count of Amounts from Table H......Things are a bit more complex but this is the gist.I am using SQL 2000.I know how to do this pretty easily using a stored procedure. But howcan I do it in a view? A SQL server won't meet my needs in thissituation.I tried OpenQuery ('myserver', 'exec myprocedure') but get the messagethat my server is not configured for data access. I tried the systemstored procedure to set data access to true but nothing seemed tohappen.I also tried Select * from (Select Statement1, select statement2)but got syntax error at the comma between statement1 and statement2.Trying to use select Statement1 as ABC to does not seem to work either.Is there a way to do what I want without making 15 views and then afinal view that shows them all together? I know I could probably dosomething by creating a ton of functions, but it really seems thisshould not be that hard...I am definitely open to any easy suggestions!Thanks,Ryan
View 3 Replies
View Related
Sep 17, 2006
Hi All,I have two tables, one is about member infomations, the other is thecatergoriesmember_info(id,name,email,phone)member_categories(id,category)how can create a view like this (id, name, category1, category2,category3) with high performance?Thanks in advance.Joshua
View 2 Replies
View Related
Mar 4, 2007
somebody help me??
View 4 Replies
View Related
Nov 21, 2006
Cannot see the Colums in the "design view" of Queries. All i see when i want to design a new query is *columns
This happens in only one database, in other databases using same server i can see the colums and can tick them to view then in the query.
In enterprise manager i see all the columns.
Using SQL 2000 and MSAccess 2000
View 1 Replies
View Related
