SQL 2000 To SQL 2005 Upgrade Error - Database Down - Updated - Help Appreciated
Jan 3, 2007
SQL 2000 to SQL 2005 Upgrade Error - Database Down - Help Appreciated
I am upgrading a SQL 2000 standard database server to SQL 2005 standard on a windows 2003 server
I am logged in as domain admin and started the upgrade as 'sa'
The upgrade stops with the error:
Service MSSQLSERVICE can not be started. Verify you have sufficient privilages to start system services. The error code is (17185)
The error log shows:
2007-01-04 15:59:38.77 Server Authentication mode is MIXED.
2007-01-04 15:59:38.79 Server Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86)
Oct 14 2005 00:33:37
Copyright (c) 1988-2005 Microsoft Corporation
Standard Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
2007-01-04 15:59:38.79 Server (c) 2005 Microsoft Corporation.
2007-01-04 15:59:38.79 Server All rights reserved.
2007-01-04 15:59:38.79 Server Server process ID is 4188.
2007-01-04 15:59:38.79 Server Logging SQL Server messages in file 'F:SQLDataMSSQLlogERRORLOG'.
2007-01-04 15:59:38.79 Server This instance of SQL Server last reported using a process ID of 2980 at 1/4/2007 3:56:58 PM (local) 1/4/2007 2:56:58 AM (UTC). This is an informational message only; no user action is required.
2007-01-04 15:59:38.79 Server Registry startup parameters:
2007-01-04 15:59:38.79 Server -d F:SQLDataMSSQLdatamaster.mdf
2007-01-04 15:59:38.79 Server -e F:SQLDataMSSQLlogERRORLOG
2007-01-04 15:59:38.79 Server -l F:SQLDataMSSQLdatamastlog.ldf
2007-01-04 15:59:38.79 Server Command Line Startup Parameters:
2007-01-04 15:59:38.79 Server -s MSSQLSERVER
2007-01-04 15:59:38.79 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2007-01-04 15:59:38.79 Server Detected 4 CPUs. This is an informational message; no user action is required.
2007-01-04 15:59:38.83 Server Set AWE Enabled to 1 in the configuration parameters to allow use of more memory.
2007-01-04 15:59:39.02 Server Using the static lock allocation specified in the locks configuration option. Allocated 20000 Lock blocks and 20000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2007-01-04 15:59:39.02 Server Multinode configuration: node 0: CPU mask: 0x0000000a Active CPU mask: 0x0000000a. This message provides a description of the NUMA configuration for this computer. This is an informational message only. No user action is required.
2007-01-04 15:59:39.04 Server Multinode configuration: node 1: CPU mask: 0x00000005 Active CPU mask: 0x00000005. This message provides a description of the NUMA configuration for this computer. This is an informational message only. No user action is required.
2007-01-04 15:59:39.04 Server Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-01-04 15:59:41.04 Server Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-01-04 15:59:41.04 Server Database Mirroring Transport is disabled in the endpoint configuration.
2007-01-04 15:59:41.04 spid7s Starting up database 'master'.
2007-01-04 15:59:41.05 spid7s 1 transactions rolled forward in database 'master' (1). This is an informational message only. No user action is required.
2007-01-04 15:59:41.07 spid7s 0 transactions rolled back in database 'master' (1). This is an informational message only. No user action is required.
2007-01-04 15:59:41.07 spid7s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2007-01-04 15:59:41.08 spid7s SQL Trace ID 1 was started by login "sa".
2007-01-04 15:59:41.08 spid7s Starting up database 'mssqlsystemresource'.
2007-01-04 15:59:41.11 spid7s Using 'dbghelp.dll' version '4.0.5'
2007-01-04 15:59:41.11 spid7s ***Stack Dump being sent to F:SQLDataMSSQLLOGSQLDump0035.txt
2007-01-04 15:59:41.11 spid7s SqlDumpExceptionHandler: Process 7 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process.
2007-01-04 15:59:41.11 spid7s * *******************************************************************************
2007-01-04 15:59:41.11 spid7s *
2007-01-04 15:59:41.11 spid7s * BEGIN STACK DUMP:
2007-01-04 15:59:41.11 spid7s * 01/04/07 15:59:41 spid 7
2007-01-04 15:59:41.11 spid7s *
2007-01-04 15:59:41.11 spid7s *
2007-01-04 15:59:41.11 spid7s * Exception Address = 78144D3A Module(MSVCR80+00014D3A)
2007-01-04 15:59:41.11 spid7s * Exception Code = c0000005 EXCEPTION_ACCESS_VIOLATION
2007-01-04 15:59:41.11 spid7s * Access Violation occurred reading address 0000001E
2007-01-04 15:59:41.11 spid7s *
2007-01-04 15:59:41.11 spid7s *
2007-01-04 15:59:41.11 spid7s * MODULE BASE END SIZE
2007-01-04 15:59:41.11 spid7s * sqlservr 01000000 02BA7FFF 01ba8000
2007-01-04 15:59:41.11 spid7s * ntdll 7C800000 7C8BFFFF 000c0000
2007-01-04 15:59:41.11 spid7s * kernel32 77E40000 77F41FFF 00102000
2007-01-04 15:59:41.11 spid7s * MSVCR80 78130000 781CAFFF 0009b000
2007-01-04 15:59:41.11 spid7s * msvcrt 77BA0000 77BF9FFF 0005a000
2007-01-04 15:59:41.11 spid7s * MSVCP80 7C420000 7C4A6FFF 00087000
2007-01-04 15:59:41.11 spid7s * ADVAPI32 77F50000 77FEBFFF 0009c000
2007-01-04 15:59:41.11 spid7s * RPCRT4 77C50000 77CEEFFF 0009f000
2007-01-04 15:59:41.11 spid7s * USER32 77380000 77411FFF 00092000
2007-01-04 15:59:41.11 spid7s * GDI32 77C00000 77C47FFF 00048000
2007-01-04 15:59:41.11 spid7s * CRYPT32 761B0000 76242FFF 00093000
2007-01-04 15:59:41.11 spid7s * MSASN1 76190000 761A1FFF 00012000
2007-01-04 15:59:41.11 spid7s * Secur32 76F50000 76F62FFF 00013000
2007-01-04 15:59:41.11 spid7s * MSWSOCK 71B20000 71B60FFF 00041000
2007-01-04 15:59:41.11 spid7s * WS2_32 71C00000 71C16FFF 00017000
2007-01-04 15:59:41.11 spid7s * WS2HELP 71BF0000 71BF7FFF 00008000
2007-01-04 15:59:41.11 spid7s * USERENV 76920000 769E3FFF 000c4000
2007-01-04 15:59:41.11 spid7s * opends60 333E0000 333E6FFF 00007000
2007-01-04 15:59:41.11 spid7s * NETAPI32 71C40000 71C97FFF 00058000
2007-01-04 15:59:41.11 spid7s * SHELL32 7C8D0000 7D0D2FFF 00803000
2007-01-04 15:59:41.11 spid7s * SHLWAPI 77DA0000 77DF1FFF 00052000
2007-01-04 15:59:41.11 spid7s * comctl32 77420000 77522FFF 00103000
2007-01-04 15:59:41.11 spid7s * psapi 76B70000 76B7AFFF 0000b000
2007-01-04 15:59:41.11 spid7s * instapi 48060000 48069FFF 0000a000
2007-01-04 15:59:41.11 spid7s * sqlevn70 4F610000 4F7A0FFF 00191000
2007-01-04 15:59:41.11 spid7s * SQLOS 344D0000 344D4FFF 00005000
2007-01-04 15:59:41.11 spid7s * rsaenh 68000000 6802EFFF 0002f000
2007-01-04 15:59:41.11 spid7s * AUTHZ 76C40000 76C53FFF 00014000
2007-01-04 15:59:41.11 spid7s * MSCOREE 61FB0000 61FF4FFF 00045000
2007-01-04 15:59:41.11 spid7s * ole32 77670000 777A3FFF 00134000
2007-01-04 15:59:41.11 spid7s * msv1_0 76C90000 76CB6FFF 00027000
2007-01-04 15:59:41.11 spid7s * iphlpapi 76CF0000 76D09FFF 0001a000
2007-01-04 15:59:41.11 spid7s * kerberos 62220000 62277FFF 00058000
2007-01-04 15:59:41.11 spid7s * cryptdll 766E0000 766EBFFF 0000c000
2007-01-04 15:59:41.11 spid7s * schannel 76750000 76776FFF 00027000
2007-01-04 15:59:41.11 spid7s * COMRES 77010000 770D5FFF 000c6000
2007-01-04 15:59:41.11 spid7s * XOLEHLP 622E0000 622E5FFF 00006000
2007-01-04 15:59:41.11 spid7s * MSDTCPRX 622F0000 62367FFF 00078000
2007-01-04 15:59:41.11 spid7s * msvcp60 780C0000 78120FFF 00061000
2007-01-04 15:59:41.11 spid7s * MTXCLU 62370000 62388FFF 00019000
2007-01-04 15:59:41.11 spid7s * VERSION 77B90000 77B97FFF 00008000
2007-01-04 15:59:41.11 spid7s * WSOCK32 71BB0000 71BB8FFF 00009000
2007-01-04 15:59:41.11 spid7s * OLEAUT32 77D00000 77D8BFFF 0008c000
2007-01-04 15:59:41.11 spid7s * CLUSAPI 62390000 623A1FFF 00012000
2007-01-04 15:59:41.11 spid7s * RESUTILS 623B0000 623C2FFF 00013000
2007-01-04 15:59:41.11 spid7s * DNSAPI 76ED0000 76EF8FFF 00029000
2007-01-04 15:59:41.11 spid7s * winrnr 76F70000 76F76FFF 00007000
2007-01-04 15:59:41.11 spid7s * WLDAP32 76F10000 76F3DFFF 0002e000
2007-01-04 15:59:41.11 spid7s * rasadhlp 76F80000 76F84FFF 00005000
2007-01-04 15:59:41.11 spid7s * security 62800000 62803FFF 00004000
2007-01-04 15:59:41.11 spid7s * dbghelp 671B0000 672C7FFF 00118000
2007-01-04 15:59:41.11 spid7s *
2007-01-04 15:59:41.11 spid7s * Edi: 62FA0040: 62FA0028 671AFFF0 00000000 00000000 00000000 00000000
2007-01-04 15:59:41.11 spid7s * Esi: 0000001E:
2007-01-04 15:59:41.11 spid7s * Eax: 0416C05E: C0400096 C0400416 00000416 000062FA 00000000 00000000
2007-01-04 15:59:41.11 spid7s * Ebx: 0416C040: 0105F270 00002000 00000005 00000000 3368C1E0 00000000
2007-01-04 15:59:41.11 spid7s * Ecx: 0105B010: 458B0046 01F88348 00D3850F 458B0000 89C23B50 0F342444
2007-01-04 15:59:41.11 spid7s * Edx: 00000000:
2007-01-04 15:59:41.11 spid7s * Eip: 78144D3A: 24FFA5F3 144E5495 C78B9078 000003BA 04E98300 E0830C72
2007-01-04 15:59:41.11 spid7s * Ebp: 33D6E770: 33D6E790 01C65B97 62FA0040 0000001E 0416C040 0416C6DC
2007-01-04 15:59:41.11 spid7s * SegCs: 0000001B:
2007-01-04 15:59:41.11 spid7s * EFlags: 00010212: 0020006D 00690046 0065006C 005C0073 006F0043 006D006D
2007-01-04 15:59:41.11 spid7s * Esp: 33D6E768: 62FA0040 33D6E7A4 33D6E790 01C65B97 62FA0040 0000001E
2007-01-04 15:59:41.11 spid7s * SegSs: 00000023:
2007-01-04 15:59:41.11 spid7s * *******************************************************************************
2007-01-04 15:59:41.11 spid7s * -------------------------------------------------------------------------------
2007-01-04 15:59:41.11 spid7s * Short Stack Dump
2007-01-04 15:59:41.13 spid7s 78144D3A Module(MSVCR80+00014D3A)
2007-01-04 15:59:41.13 spid7s 01C65B97 Module(sqlservr+00C65B97)
2007-01-04 15:59:41.13 spid7s 01CA43B5 Module(sqlservr+00CA43B5)
2007-01-04 15:59:41.13 spid7s 01CA452E Module(sqlservr+00CA452E)
2007-01-04 15:59:41.13 spid7s 0217D3BD Module(sqlservr+0117D3BD)
2007-01-04 15:59:41.13 spid7s 0217B896 Module(sqlservr+0117B896)
2007-01-04 15:59:41.13 spid7s 0100889F Module(sqlservr+0000889F)
2007-01-04 15:59:41.13 spid7s 010089C5 Module(sqlservr+000089C5)
2007-01-04 15:59:41.13 spid7s 010086E7 Module(sqlservr+000086E7)
2007-01-04 15:59:41.13 spid7s 010D764A Module(sqlservr+000D764A)
2007-01-04 15:59:41.13 spid7s 010D7B71 Module(sqlservr+000D7B71)
2007-01-04 15:59:41.13 spid7s 010D746E Module(sqlservr+000D746E)
2007-01-04 15:59:41.13 spid7s 010D83F0 Module(sqlservr+000D83F0)
2007-01-04 15:59:41.13 spid7s 781329AA Module(MSVCR80+000029AA)
2007-01-04 15:59:41.13 spid7s 78132A36 Module(MSVCR80+00002A36)
2007-01-04 15:59:41.13 spid7s Stack Signature for the dump is 0x2BEDE9E0
2007-01-04 15:59:41.27 spid7s External dump process return code 0x20000001.
External dump process returned no errors.
2007-01-04 15:59:41.27 spid7s Error: 17185, Severity: 16, State: 1.
2007-01-04 15:59:41.27 spid7s Unable to update password policy.
2007-01-04 15:59:41.27 spid7s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
Any clues?
Cheers
Paul
View 3 Replies
ADVERTISEMENT
Oct 10, 2007
i am upgrading sql server 2000 database to sql server 2005 database.
I am using backup and restore method to upgrade.
i have an issues transferring the logins..
what is the best why to upgrade?????any info is appreciated..
View 10 Replies
View Related
Dec 12, 2006
Dear All..
I have a few databases running a sql2000 and the time as come to move them onto sql2005. Which would be the best route to take.
If I can think back to older version it was just a simply job of doing a backup in it's current version then restore in the new version? and upgrade was taken while restoring.. I could be wrong but any help !!
Thanks
Martin.
View 5 Replies
View Related
Apr 21, 2008
I just upgraded a large SQL 2000 database server to SQL 2005, and I have 2 databases that won't attach to the 2005 Server. They are both very small, about 90MB in size, and when I attach them to 2005, the process alternates between running and spinloop status. It can sit forever, and will never complete. I restored backups before the upgrade to a SQL 2000 Server, and reran DBCC CheckDB on both, and got no consistency errors, Updated Stats and indexes, then detached and moved the data files to 2005, and same thing.
View 3 Replies
View Related
Jul 6, 2007
Hi All,
I have just migrated couple of test databases
from SQL Server 2000 to 2005 (side by side).
I also migrated the server level logins using SSIS transfer logins task, available on SSIS 'Transfer logins', I selected all the databases that I have migrated so that I have all database users account in server logins (to avoid orphaned users); but I don't have all the database users in server logins, also the sys.sysusers doesn't have the database users, that I have moved to SQL 2005. Can anybody help?
Also do I need to back up the SQL Server 2000 database and restore it on SQL 2005? What impact this operation can have?
Thanks for your time..
Bidyut
View 5 Replies
View Related
Apr 24, 2008
Good afternoon everyone,
I hope that I am not asking a question which has been answered many times in the past, I did a search but could not find an answer. These may be beginner questions, so bear with me as I am something of a beginner.
This week our organization updated from SQL 2000 to SQL 2005. We are using a Microsoft Access front end for this data and the information is entered through forms into the correct tables. When our researchers are enter the information they also have to sometimes search existing information to ensure they do not duplicate what is already in there. For this we use several access queries. This has worked well on the SQL 2000 server without any issues. However, now that we are on 2005 we are starting to recieve ODBC Call fail errors and errors which specify that they are a result of a deadlock. My first question is, are the ODBC call fail errors possibly locks which caused the ODBC connection to time out? My second question is why am I recieving these errors in 2005 but not 2000?
Thanks in advance for any help
- Hitz
View 1 Replies
View Related
Jan 19, 2007
Hi,
We are performing a SQL 2005 SP1 upgrade from SQL 2000 on our Windows 2003 SP1 Standard Edition.
When we run the upgrade, we got a error "Upgrade Advisor Return -1" as a pop-up window.
When we run the Upgrade Advisor separately, we get this error :
===================================
Common Language Runtime detected an invalid program.
===================================
Common Language Runtime detected an invalid program. (System.Xml)
------------------------------
Program Location:
at System.Xml.Schema.SchemaInfo..ctor()
at System.Xml.Schema.XmlSchemaSet..ctor(XmlNameTable nameTable)
at System.Xml.XmlReaderSettings.get_Schemas()
at Microsoft.SqlServer.UpgradeAdvisor.ReportViewer.UAReportController.LoadAndValidateDataFile()
at Microsoft.SqlServer.UpgradeAdvisor.ReportViewer.UAReport.ValidateDataFile()
at Microsoft.SqlServer.UpgradeAdvisor.ReportViewer.UAIssueReport.Refresh()
at Microsoft.SqlServer.UpgradeAdvisor.ReportPanel.OpenReport(String reportFile)
We are in a lost for solutions. We do hope to hear from anyone asap...
Greatly appreciated for any kind assistance.
Thanks.
View 1 Replies
View Related
Jul 20, 2005
It's arriving from ebuyer tomorrow for 32 quid. I already have aninstance of MSDE running on the laptop and ideally i would like SQLserver to be installed and use the current instance and not installany other additional services. [hope i got my terminology correcthere.] Basically all i would like is to use the Enterprise Managerwith my existing MSDE database. I was wondering if there is anything ishould be doing before I install. Should i shut down the service orleave it running for instance.Thanks for any tips,AndyB
View 2 Replies
View Related
Dec 11, 2007
Hello,
I have a project where I have to upgrade SQL 2000 to 2005. When we are upgrading we are going to move to new server so server name will change. Most of our applications have a hard coded connection string. Applications are developed with Classic ASP, .NET 1.1 and 2.0 as well.
Now the question is what is the best way to do this? Changing all the connection string will be a very painful task as we have many applications.
Can anyone suggest a way where we can achieve this without changing all the connection strings?
Thanks in advance.
Tareq
View 5 Replies
View Related
Oct 24, 2007
what are some of the issues that we might face while upgrading from SQl 2000 to SQl 2005? Actually I have to create upgrade plan for path from MS 2000 to MS 2005.
Any suggestions will be appreciated.
Thanks
View 1 Replies
View Related
Nov 27, 2007
Hi,
I was wondering if anyone could point me in the right direction for upgrading from SQL 2000 to SQL 2005?
I was under the impression that it was as easy as following an upgrade path after popping in the CD, but I realized it's not.
I'm a Systems Administrator who has installed both version in stand alone systems, but never tried an upgrade.
Thanks for your help.
View 2 Replies
View Related
Feb 4, 2008
Hello,
I would like to upgrade sql server 2000 to sql 2005. So Can I install the sql server 2005 on the same server where sql 2000 is already running and then use the database upgrade wizard. Or should I install the sql server 2005 on a different server.
Thanks
View 5 Replies
View Related
Aug 9, 2006
I have a sql 2000/2005 side-by-side install on a single server. I right-click a sql 2000 database, select All Tasks, and the Copy Database to upgrade a sql 2000 database. In the "Copy Database Wizard" I see the message:
"To use the detach and attach method SQL Server Agent must run under an Integration Servicers Proxy account that can access the file system of both the source and destination servers."
1. What does that mean?
2. I decided to click "Finish" in the wizard, and the database copy seemed to work fine. Whaterver 1) means does, by default, the SQL Server Agent already run under this "Integration Services Proxy" account. (Rememberr the upgrade process did work).
TIA,
barkingdong
View 2 Replies
View Related
Jul 17, 2007
Hey Guys,
Looking for some type of solution on this issue. I'm going from SQL2000 to SQL2005 and I run the upgrade advisory tool and all and I'm going through the procedures of getting our SQL server updated to SQL2005, when I attempt to run that analyzer to take a look at how well the migration will go. I get a timed out error message on the fallowing.
ORDERBYORDINALS
FTCATPROPITEMCOUNT
OLDSYSTEMTABLES
DROPSYSOBJ
HOSTIDRETURN
FTPROPS
QRYGOVCOSTLIMIT
FTCATALOGNAMERESTRICTION
SPCONFIGURE
INVALIDCHAR
OPENXMLWITH
XPAGENTPROXY
UPDATETEXT
SPHELPTRIGGERNEWCOL
DISKINIT
SYSPERFINFO
DEPRECATEDSP
OLDDBCC
ORDERBYALIAS
Exact error message and its always the same for each entry.
"Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding"
Any help in this are would be greatly appreciated, all other issues have been resolved I'm just stuck on this and I don't want to upgrade until the advisory tool gives me the ok to.....
Thanks in advance.
View 2 Replies
View Related
Oct 5, 2006
All,
I am looking for upgrading SQL 2000 databases to SQL 2005.Has anybody got a detailed plan /Documents for doing so?.
Thanks and Regards
Avijit Macker
View 3 Replies
View Related
Sep 23, 2006
I am in the beginning of upgrading a SQL 2000 DB on a Small business server to a 64 bit 2005 DB on a new box. Is my best method of upgrading to use the "copy" DB function in 2005? If so, what do I need to do to install the management tools on the 2000 box - since this is a 32 bit edition, and I have the 64 bit media?
View 1 Replies
View Related
Mar 7, 2008
I got a requirement to upgrade only One SQL 2000 to SQL 2005 server. i did check that there are only databases in this server along with Linked server. I am looking for a best practice document for SQL upgrade and any thoughts or experience any one has faced during upgrade.
Other question is what about if there is a DTS on the server. right now on this particular server there is no DTS but in coming weeks i may need to upgrade other server which is having DTS as well. I have worked alot on SSIS packages but want to see if DTS will be converted to SSIS packages or i will have to manually do it.
Thanks
View 3 Replies
View Related
Apr 2, 2008
Hi,
We have 2 .net 1.1 applications using Microsoft SQL Server 2000 Enterprise Edition. To connect to database we are using nHibernate 0.6 for one application and Microsoft Enterprise Library Data Blocks Ver 1.0 in another.
We are planning to upgrade SQL servers of both applications to SQL 2005 Enterprise edition and retain .net 1.1 framework. Are nHibernate 0.6 and Microsoft Enterprise Library 1.0 data blocks compatible with the SQL 2005? Are any upgrades required for these as well?
We ran SQL upgrade advisor report on these applications, there weren't any changes to table/ stored procs suggested. Could that mean that the existing table design and stored procs are compatible with SQL 2005?
Thanks in Advance,
Abhijith Bharadwaj
View 1 Replies
View Related
Mar 9, 2008
Hi all,
I just ran sql upgrade advisor and got the following message:
"You can use SQL Server 2005 tools to edit your existing DTS packages. However, upgrading or
uninstalling the last instance of SQL Server 2000 on a computer removes the components required
to support this feature. You can retain or restore these components by installing the special
Web download, €œSQL Server 2000 DTS Designer Components,€? from the Microsoft Download Center
before or after you upgrade or uninstall SQL Server 2000."
I do have several DTS packages in my sql server 2000 database. does that mean if I upgrade my current 2000 database to 2005, those dts will be gone. But I can download sql server 2000 dts deginer components on our new sql 2005 database server before I upgrade. Then when I restore my sql 2000 database on our new 2005 server, eveything would be OK? I am not sure if my understanding is correct.
My advisor is on my local computer and I am running analysis against a remote database(on our intranet),€œSQL Server 2000 DTS Designer Components,€? should be intalled on my local computer or remote database server? what steps I should take in order to retain my dts package or transform it into something else?
can you shed light on me?
Thanks.
Betty
View 3 Replies
View Related
May 7, 2008
I am going through upgrading our current installation of SQL 2000 to 2005. When I install 2005 it doesn't seem to upgrade the server, but only installs the server tools. Do I need to completely remove 2000 in order to upgrade? Thanks!
View 4 Replies
View Related
Aug 17, 2005
Where can i find some reference material on how to upgrade to 2005 in a replicated environment please?
does anyone know what order i need to tackle the servers, is it likely to be the same as the Service Pack process?
cheers
View 3 Replies
View Related
Jun 17, 2008
Hi all,
Recently, I upgraded one of our database servers from SQL 2000 to SQL 2005. At the moment, all the databases are in 80 compatibility mode. I upgraded them based on the false pretenses that I could perform online reindexing right off the bat. Apparently, that isn't the case, and it requires switching to 90 compatibility. My question is if I switch to 90, will all indexes be invalidated/unusable? Or will I be able to switch to 90 and perform the online reindexing right away with no downtime?
We have a few 24/7 production VLDB's in the mix (one of which is on this newly upgraded server), and only reasonable downtime is possible. The largest window of downtime I have is about 10 PM - 5 AM with prior notice.
The upgrade was performed using SAN-based LUN's with a detach/reattach.
Thanks,
Matt
View 11 Replies
View Related
Apr 5, 2007
Hello
Server Details:
OS => Windows Server 2003
SQL => SQL Server 2005
Client Machines:
OS => WinXP sp2
SQL => 2000, 2005 express
The developers at work connect remotely to the server. Some of them have the "client SQL 2005 express" and others are using "SQL 2000"
Over the next week I plan to upgrade all the developers to 2005 Standard.
I have performed an upgrade of '2005 express' to '2005 standard' and encountered no problems. However I have no experience upgrading the 2000 client.
Can anyone suggest a strategy (fresh install/upgrade)or highlight any pitfalls that I should avoid.
Thanks in advance for any help/suggestions offered.
Regards
Toby
View 1 Replies
View Related
Jul 30, 2007
Initially, the articles I read suggested that doing an "in place" upgrade is the simplest path, with the drawback that if something goes wrong, I'll have to re-install 2000. And that migrating is more difficult since I'll have to recreate all the logins , security, replication ....
Then I saw a series of posts saying migration is the best ... backup & restore (or detach, reattach) the DBs to a new instance of SQL 2005. What about the systems DBs, such as MSDB and the DTS packages ?? Also, If I migrate to a new instance of SQL, how will I re-establish the connections from other servers ? They are replicating or DTS-ing to ServerA, but now SQL2005 is on ServerASQL2005 (Same server, different instance.
In the scale of things, we have fairly simple environments, although our Production database is almost 300 Gig.
If I install a new instance of SQL 2005 on my SQL 2000 server, and migrate everything from 2000 to 2005, I now have 2 instances: ServerA and ServerASQL2005. All my other servers are referencing the original instance name of ServerA. How do I resolve that problem so that communication between the other servers will still work ??
View 7 Replies
View Related
Aug 15, 2007
I've installed a test instance of SQL 2000 on a test box. I want to try the In-Place upgrade to 2005. I installed 2005 on the test box also, but have been unable to see how to perform the upgrade. I thought running 2005 setup again would prompt me for an instance name .... but it just tells me 2005 is already installed. I must be missing something simple.
View 5 Replies
View Related
Sep 17, 2007
Good Morning!
I am beginning the process of moving SQL 2000 databases to SQL 2005 cluster.
Has anyone already did this and is there anything I should know?
We plan on leaving the SQL 2000 database up during this process and granting read only at the time.
I am nervous about this as this is a high profile database in our dept.
I don't even know if I know where to begin!
Any suggestions are truely welcome!
Thanks,
/P
View 3 Replies
View Related
Mar 28, 2008
hi all,
i have written a small checklist for my upgrades of databases from 2000 to 2005 servers. I was hoping you can take a look and see if im missing something.
TIA
1.Create backup of 2000 Database to a file group
a.Full Backup
b.Overwrite Existing Media Set
c.To File with Extension .BAK
d.Locate backup on DEV @ X:SqlServer_DataMSSQL2K5BACKUP
e.Make sure Backup File Name has _for_2k5_migration.BAK at the end
2.Create Database on SQL Server 2005 System on DEV
a.MYSERVERDEVELOPMENT2K5
b.Data files go to : X:SqlServer_DataMSSQL2K5DATA
c.Log files go to : X:SqlServer_DataMSSQL2K5LOG
d.Set Compatibility to 80 (SQL SERVER 2000)
3.Restore Backup to 2005 From File
a.Options Tab – Check Overwrite existing database
b.Once Restore is completed set compatibility mode to 90 (Sql Server 2005)
4.Script all Logins to 2K5
a.Go into 2000 server Security -> Logins
b.Script as CREATE TO Clipboard
c.Open query on 2K5 DB
d.Paste and run (Database must be installed on 2K5 first)
i have not done anything about maintenece plans - is this okay as it is or am i forgetting / not knowing anything else!
View 1 Replies
View Related
Sep 5, 2006
Hello,
First off, thanks to all for taking the time to read and respond to this question of mine. Greatly appreciated.
Let me explain my current scenario followed with the question. We currently have our VB application written and working at various client sites on SQL 2000. We did received a number of request on upgrading to SQL 2005. We did some preliminary testing in-house on SQL 2005 (backed up the 2000 database and restored on 2005 which worked just great). It is also my hope that technically, everything should work just fine since 2005 is backward compatible to 2000.
Is anybody aware of any issues with taking a 2000 database and getting it to work on SQL 2005 without any mods?
Thanks.
View 5 Replies
View Related
Oct 11, 2007
Hi Friends, I am trying to Upgrade my Sql server 2000 Enterprise edition with SP4 to Sql server 2005 Enterprise edition (Inplace upgrade). The Sql 2000 machine was just now installed and applied with SP4 and has only system databases I want to try configuring Log Shipping in sql 2000 and then perform some testing by upgrading it to sql 2005.........so thats why i went for sql 2000.The OS is Windows 2003 server with SP1 and has sufficient hard disk space. I knew that it is possible to perform Upgrade from Sql 2000 SP3 or later (Enterprise edition) to Sql 2005 Enterprise edition. But when I run the sql 2005 Enterprise edition Setup, I provide the instance name in the dialog box! and beneath it there is "Installed instances" box is present if i click it, it shows the version and edition of my sql 2000 instance as 8.00.194 which is nothing but Sql 2000 RTM version. Hence I am unable to proceed with the installation as it says to refer the version and edition upgrades are not matching as per the requirements........But if i open the query analyser for that instance and type
Code Block
Select @@Version or Select Serverproperty('Productlevel') it displays the o/p as SP4Also in the error log it shows as 8.02039 which is Sql 2000 SP4 I am a bit confused even though sp4 is installed i am unable to perform the upgrade ? Feel free to provide your valuable suggestionsadvice if any ?RegardsDeepak
View 2 Replies
View Related
Jan 31, 2006
I am currently using sql server 2000 and I have just installed sql server 2005 in a separate box that will be used as the production server so I will be upgrading to the new database server soon.
I was reading the upgrade options for this situation and one option is to detach the 2000 database, copy the mdf and log files to the new server and attach it to mssql 2005. Another option is to recreate the tables, views, etc. and export/import the data to the new server.
I would like to ask what the best option is for this situation because I am not sure what the advantages and disadvantages of just detaching/attaching and recreating the database in sql server 2005. If I just detach/attach the database, will there be any disadvantage in the performance because the database files were created in 2000 and is functioning because of backward compatibility in 2005? Would it be better to recreate the database in 2005 and import the data from 2000 so that the database would be running in a way that is designed for 2005?
I am not really sure of the differences of these upgrade options so any ideas would be greatly appreciated.
Thanks in Advance
-Voltaire
View 7 Replies
View Related
Dec 30, 2007
These are the steps i plan on taking.
1. sp_help_revlogin gets logins sql 2000
2. Backup from SQL 2000 to SQL 205
3. Change database to 90 mode
4. Change database to check sum and auto stats sync
5. Rebuild Indexes on databases
6. Jobs (i will manually move over)
Anything else i should run after the rebuilds
Thanks
View 2 Replies
View Related
Feb 15, 2007
I am upgrading a sql server 2000 with sp4 (I have double and triple checked the sp) on a windows 2003 sp1 server and I keep getting the following error:
Name: Microsoft SQL Server 2000
Reason: Your upgrade is blocked. For more information about upgrade support, see the "Version and Edition Upgrades" and "Hardware and Software Requirements" topics in SQL Server 2005 Setup Help or SQL Server 2005 Books Online.
Service pack requirement check:
Your upgrade is blocked because of service pack requirements. To proceed, apply the required service pack and then rerun SQL Server Setup. For more information about upgrade support, see the Version and Edition Upgrades topic in SQL Server 2005 Setup Help or SQL Server 2005 Books Online.
I cannot find anything saying that I need any other service pack other than sp4 for sql serer 2000. Any one ever run into this or have a clue what might be causing the installer to think I have the wrong service pack?
View 3 Replies
View Related
Apr 18, 2008
Hello all,
My name is Elizabeth. I'm currently trying to upgrade our Reporting Server to version 2005. The SRS that's currently installed on our CRM server is version 2000, and we want to upgrade that to 2005 so that we can use VS 2005 to write new reports (since SRS 2000 is not compatible with VS 2005).
So I followed the steps as on this link http://technet.microsoft.com/en-us/library/ms144267.aspx
However, I'm stuck at step# 11. As it says on the link: "If a component has a check box that is unavailable, the component does not qualify for upgrade to SQL Server 2005." I did get something like below; the check box is unavailable.
When I click on the "Detail" button on that menu, I get a message like below:
If I click on "Next" anyway from the menu, I get this error message:
I'm just wondering why it doesn't let me upgrade to 2005. The current version of SRS that's installed in our CRM server is Microsoft SQL Server 2000 Reporting Service Standard Edition. According to Microsoft link http://technet.microsoft.com/en-us/library/ms143393.aspx that edition should be upgradable.
It just crossed my mind actually; could it be because our Window Server is only using Service Pack 2, while according to that link the server has to use SP3 version or later. Please clarify me if this is the case.
Could you please help me on this one? I really appreciate it!! Thanks in advanced!!
-Elizabeth K.
View 1 Replies
View Related
