I'm new to this forum and I'm trying to find out a solutiona for a huge problem in a SQL2005 DB.
When I run DBCC CHECKDB it gives me the folowing error:
Msg 7985, Level 16, State 2, Line 1
System table pre-checks: Object ID 5. Could not read and latch page (1:64255) with latch type SH. Check statement terminated due to unrepairable error.
DBCC results for 'testdb'.
Msg 5233, Level 16, State 106, Line 1
Table error: alloc unit ID 327680, page (1:64255). The test (m_freeCnt == freeCnt) failed. The values are 6687 and 6688.
CHECKDB found 0 allocation errors and 1 consistency errors not associated with any single object.CHECKDB found 0 allocation errors and 1 consistency errors in database 'testdb'.
I'm currently receiving the following error message whilst attempting to install SQL Server 2005 Standard Edition on Windows Server 2003 (32 Bit): Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.
This server already has an install of SQL Server 2000 as the default instance. I'm attempting to install a new named instance of SQL Server 2005.
Extract from log:
<Func Name='LaunchFunction'> Function=Do_sqlPerfmon2 <Func Name='GetCAContext'> <EndFunc Name='GetCAContext' Return='T' GetLastError='0'> Doing Action: Do_sqlPerfmon2 PerfTime Start: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007 <Func Name='Do_sqlPerfmon2'> <EndFunc Name='Do_sqlPerfmon2' Return='0' GetLastError='2'> PerfTime Stop: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007 MSI (s) (4C:FC) [10:20:02:833]: Executing op: ActionStart(Name=Rollback_Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Removing performance counters,) <EndFunc Name='LaunchFunction' Return='0' GetLastError='0'> MSI (s) (4C:FC) [10:20:02:849]: Executing op: CustomActionSchedule(Action=Rollback_Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1281,Source=BinaryData,Target=Rollback_Do_sqlPerfmon2,CustomActionData=100Removing performance counters200000DTSPipelineC:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.INI) MSI (s) (4C:FC) [10:20:02:849]: Executing op: ActionStart(Name=Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Installing performance counters,) MSI (s) (4C:FC) [10:20:02:849]: Executing op: CustomActionSchedule(Action=Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1025,Source=BinaryData,Target=Do_sqlPerfmon2,CustomActionData=100Installing performance counters200000C:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.INIC:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.HC:Program FilesMicrosoft SQL Server90DTSBinnDTSPipelinePerf.dllDTSPipeline0DTSPipelinePrfData_OpenPrfData_CollectPrfData_Close) MSI (s) (4C:94) [10:20:02:864]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI1683.tmp, Entrypoint: Do_sqlPerfmon2 <Func Name='LaunchFunction'> Function=Do_sqlPerfmon2 <Func Name='GetCAContext'> <EndFunc Name='GetCAContext' Return='T' GetLastError='0'> Doing Action: Do_sqlPerfmon2 PerfTime Start: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007 <Func Name='Do_sqlPerfmon2'> <EndFunc Name='Do_sqlPerfmon2' Return='2' GetLastError='2'> PerfTime Stop: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007 Gathering darwin properties for failure handling. Error Code: 2 MSI (s) (4C!F0) [10:23:46:381]: Product: Microsoft SQL Server 2005 Integration Services -- Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.
You can ignore this and it will complete the installation, but subsequently trying to patch with SP2 will fail on the same sections - Hotfix.exe crashes whilst attempting to patch Database Services, Integration Services and Client Components (3 separate crashes).
I've removed SQL Server 2005 elements and tried to re-install, but it's not improved the situation.
I am trying to import Access reports using Visual Studio 2005 and Access 2007. SQL Server 2005 with Reporting Services is also installed. I select Reports in the Solution Explorer and then Import Reports... Microsoft Access and browse to my Access database. After I select the database I see it open briefly as if it is trying to import the reports but then Access quickly closes and a error pops up: "You already have the database open." I have checked and double checked and the database is not open. I have even tried several different databases and the same errror occurs. Any help would be greatly appreciated.
Just installed SQL Server 2005 and tested my old VS 2005 ASPnet websites, which were connected toSQL Server 2000 databases before. All my websites were created for local HTTP applications, coded with a connection string with User ID and Password. The SQL Server 2000 was configured as mixed authentication (i.e. with User ID and Password). These websites worked very well with SQL Server 2000 database server.Testing my old VS 2005 websites with SQL Server 2005 database, showed a 'Login failed for a User ''.' error msgalthough the 'Test Connection' on VS 2005 design showed a perfect query for e.g. a GridView control. I have assured that the UserID/Password were correct for Management Studio Security object'slogin and Database Security's user. The server instance was configured with mixed authentication mode. One thing I am not sure of is, when clicking the Management Studio icon, a Connection dialog showed up, asking for a Windows or MIxed authentication? I just stayed with the Windows authentication. What does the authenticationmode have anything to do with the VS 2005 website connection? Should I change to mixed authetnication mode?TIA,Jeffrey
I am attempting to install SQL Server 2005 Developer Edition onto a Windows XP Pro SP2 machine, but unfortunately each time that I attempt to install I receive an error message in the summary log as follows:
Product : Microsoft SQL Server 2005 Product Version: 9.00.1399.06 Install : Failed Log File : C:Program FilesMicrosoft SQL Server90Setup Last Action : InstallFinalize Error String : The setup has encountered an unexpected error while Updating Installed Files. The error is : Fatal error during installation. Error Number : 29528
There is probably a simple solution for the issue but unfortunately I am unaware of what it is? I can€™t tell if the issue is specific to registry settings, security, file types, etc€¦ The information below surrounds the error w/in the log, any suggestions would be greatly appreciated?
The value returned is -2147024891 <EndFunc Name='Do_UpdateETWMOFWithGUID' Return='1603' GetLastError='0'> PerfTime Stop: Do_UpdateETWMOFWithGUID : Tue Feb 13 16:02:24 2007 Gathering darwin properties for failure handling. Error Code: 1603 MSI (s) (6C!D0) [16:02:37:273]: Product: Microsoft SQL Server 2005 -- Error 29528. The setup has encountered an unexpected error while Updating Installed Files. The error is: Fatal error during installation.
Error 29528. The setup has encountered an unexpected error while Updating Installed Files. The error is: Fatal error during installation.
<EndFunc Name='LaunchFunction' Return='1603' GetLastError='203'> MSI (s) (6C:94) [16:02:37:283]: User policy value 'DisableRollback' is 0 MSI (s) (6C:94) [16:02:37:283]: Machine policy value 'DisableRollback' is 0 Action ended 16:02:37: InstallFinalize. Return value 3.
PDA info: .NET CF 1.0 env-string... MS SQL client MS SQLCE 2.0 dev MS SQLCE 2.0
DESKTOP info: Microsoft SQL Server Management Studio Express 9.00.2047.00 Microsoft Data Access Components (MDAC) 2000.085.1117.00 (xpsp_sp2_rtm.040803-2158) Microsoft MSXML 2.6 3.0 6.0 Microsoft Internet Explorer 6.0.2900.2180 Microsoft .NET Framework 2.0.50727.42 Operating System 5.1.2600
copied an app from http://www.codeproject.com/netcf/PocketPCwithSQLCE/PocketPCwithSQLCE_Src.zip modified its CONFIG.XML to... <?xml version="1.0" encoding="utf-8" ?> <Configuration> <DatabaseServer>192.168.1.89</DatabaseServer> <DatabaseName>D1Temp</DatabaseName> <DatabaseLogin>sa</DatabaseLogin> <DatabasePassword></DatabasePassword> <SQLCEURL>http://192.168.1.89/SqlMobile/sqlcesa30.dll</SQLCEURL> <LocalDBConnect>Provider=Microsoft.SQLServer.OLEDB.CE.2.0; Data Source=My DocumentsMyFav.sdf;</LocalDBConnect>
I have a SProc that runs across many clients without any problems. Every now and then, though, I get the following error:
Internal Query Processor Error: The query processor encountered an unexpected error during execution. [SQLSTATE 42000] (Error 8630).
All I am doing is populating Temp tables with some data and then joining them together to create a Global Temp table that is being BCP'd to a network share.
Has anyone come across this error in SQL Server 2005? I cannot find anything on Google or Microcsoft.
Hi,My SQL Server 2005 won't start - can anyone provide some help? Thisseems to be the most significant error:- TDSSNIClient initialization failed with error 0x5, status code 0x51.There was some info here, but the reg key described looks okay:- http://blogs.msdn.com/sql_protocols/I am running SQL Server 2005 64-bit Standard Edition. The server inquestion is the first node of an Active/Active Cluster. This firststarted happening while I was trying to add a share as a clusteredresource of the other node (not to this node's resources).I have not yet reinstalled SQL Server 2005 because I am hoping for moreexplanation of the problem and a possible fix.Thanks,Tom
Hi. I've been trying to install Sql Server 2005 express on Vista Home Premium. After the initial files install, I get an error message that says the WMI configuration is not correct. (I'm not at home, so I can't post the exact error code at the moment). Does anyone have any ideas on how I can fix this? Thanks in advance.
I've recently migrated all databases to SQL Server 2005. I couldn'tfigure out how to create an SSIS package in the time I had, so I juststuck with the DTS packages. They all worked fine during testing, butonce we renamed the server we had problems. The DTS packages stillwork, but whenever I click into the Copy SQL Server Object and try toSelect Objects (on the Copy tab) I get this error:Microsoft SQL-DMOError 21776: General ErrorI click OK and get the error again and again for a total of 12 times(regardless of which database I'm connecting to in the packages, soit's not related to the number of objects in the database). Then theSelect Objects screen appears and it's business as usual.Has anyone else come across this problem and found a solution? I'verenamed the server using sp_dropserver and sp_addserver and select@@servername returns the correct valueJohn Hunter
Que tal. Al iniciar el instalador SQL Server 2005 Express me saca el error "System Configuration Checker cannot be executed due to WMI configuration on te machine..." Si alguien sabe como solucionarlo agradeceria se ayuda. Gracias.
We have several large government web sites that we help look after. We recently migrated one of them from SQL Server 2000 to 2005 and are having a problem with our nightly email job in that if it runs for more than an hour then after exactly 1 hour the email job gets a "Timeout expired" message back from SQL Server.
Our batch jobs do run on a different server and connect remotely to our SQL Server DB. I did change the connections - remote query timeout and increased it 10 fold, but this didn't make any difference. Is there any other parameter that may be causing the Timeout expired error after exactly 1 hour?
Running [dbo].[insertlogin] ( @log = hiten, @pas = hiten ).A .NET Framework error occurred during execution of user-defined routine or aggregate "insertlogin": System.Data.SqlClient.SqlException: Must declare the scalar variable "@Log".System.Data.SqlClient.SqlException: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnectionSmi.EventSink.ProcessMessagesAndThrow(Boolean ignoreNonFatalMessages) at Microsoft.SqlServer.Server.SmiEventSink_Default.ProcessMessagesAndThrow(Boolean ignoreNonFatalMessages) at System.Data.SqlClient.SqlCommand.RunExecuteNonQuerySmi(Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at SqlServerProject1.StoredProcedures.insertlogin(SqlString log, SqlString pas).No rows affected.(0 row(s) returned)@RETURN_VALUE = Finished running [dbo].[insertlogin]. ***************************************************************all i am trying to do is : creating a SP in VS using managed code and then trying to execute it. But every time i get the above error. If you can tell me how to edit connection string in this that would be very helpful. At present i am using : Using conn As New SqlConnection("context connection=true") I tried to do "" ALTER ASSEMBLY SqlServerProject1 WITH PERMISSION_SET=EXTERNAL_ACCESS""but i get this error "" Msg 10327, Level 14, State 1, Line 1ALTER ASSEMBLY for assembly 'SqlServerProject1' failed because assembly 'SqlServerProject1' is not authorized for PERMISSION_SET = EXTERNAL_ACCESS. The assembly is authorized when either of the following is true: the database owner (DBO) has EXTERNAL ACCESS ASSEMBLY permission and the database has the TRUSTWORTHY database property on; or the assembly is signed with a certificate or an asymmetric key that has a corresponding login with EXTERNAL ACCESS ASSEMBLY permission. If you have restored or attached this database, make sure the database owner is mapped to the correct login on this server. If not, use sp_changedbowner to fix the problem.""" *********************************************************************Plz help
System.Data.SqlClient.SqlException was unhandled Class=20 ErrorCode=-2146232060 LineNumber=0 Message="An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)" Number=2 Server="" Source=".Net SqlClient Data Provider" State=0
Hi guys, I have just set up a database in SQL 2005 Express Edition. However, I have a problem accessing it with the application program created in VB 2005 EE. Before using SQL 2005, the application worked perfectly in SQL 2000. Here is my connection string used in SQL 2000:
Dim sqlConn As New SqlConnection("Data Source=(local); Database='Inventory List'; Integrated Security=yes")
Is this valid in SQL 2005 Express Edition? Or should I change the connection string instead? Thank you very much.
I've installed SQL2005 on a server already running SQL2K on my laptop. SQL2K is the default instance, so I'm trying to connect to SQL2005 using MYSERVERSQL2005 as the instance.
The steps that I've taken are to apply SP2 and enable remote connections (TCP & Named pipes). I've also made sure the SQL Server Browser service is running and enabled.
The error message that I get via SQL2005 client tools is "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)"
I dont understand as to why i am unable to connect to 2005.
Hi,I need some help. I am getting this error after I complete the asp.net register control and click on the continue button. It crashed when it tries to get it calls this Profile property((string)(this.GetPropertyValue("Address1")));When I look at the stack, it is coming from my ProfileWrapper class which adds user address, city, etc.. from a class which inherits fromSystem.Web.Profile.ProfileBase. From the stack, it is calling the System.Web.Profile and crashed when it tries to open a connection atSystem.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject). I already migrated all aspnet_user, aspnet_roles, etc.. and don't get any connection errors. It is only when I try to get the profile data. This works on my pc, but throws an error on my lunarpage website.Any help is greatly appreciated.Thanks,AJAn error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:Line 100: public virtual string Address2 {Line 101: get {Line 102: return ((string)(this.GetPropertyValue("Address2")));Line 103: }Line 104: set {Source File: c:windowsMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files oot 021d50639a6858cApp_Code.54nvluyo.1.cs Line: 102Stack Trace:[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)] System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +435 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197 System.Web.Profile.SqlProfileProvider.GetPropertyValuesFromDatabase(String userName, SettingsPropertyValueCollection svc) +782 System.Web.Profile.SqlProfileProvider.GetPropertyValues(SettingsContext sc, SettingsPropertyCollection properties) +428 System.Configuration.SettingsBase.GetPropertiesFromProvider(SettingsProvider provider) +404 System.Configuration.SettingsBase.GetPropertyValueByName(String propertyName) +117 System.Configuration.SettingsBase.get_Item(String propertyName) +89 System.Web.Profile.ProfileBase.GetInternal(String propertyName) +36 System.Web.Profile.ProfileBase.get_Item(String propertyName) +68 System.Web.Profile.ProfileBase.GetPropertyValue(String propertyName) +4 ProfileCommon.get_Address2() in c:windowsMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files oot 021d50639a6858cApp_Code.54nvluyo.1.cs:102 ProfileWrapper..ctor() in d:inetpubvhostsjavcentral.comhttpdocsApp_CodeProfileWrapper.cs:242 ProfileDataSource.GetData() in d:inetpubvhostsjavcentral.comhttpdocsApp_CodeProfileDataSource.cs:17[TargetInvocationException: Exception has been thrown by the target of an invocation.] System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +0 System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +72 System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) +308 System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) +29 System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance) +480 System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1960 System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17 System.Web.UI.WebControls.DataBoundControl.PerformSelect() +149 System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70 System.Web.UI.WebControls.FormView.DataBind() +4 System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82 System.Web.UI.WebControls.FormView.EnsureDataBound() +163 System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69 System.Web.UI.Control.EnsureChildControls() +87 System.Web.UI.Control.FindControl(String id, Int32 pathOffset) +21 System.Web.UI.Control.FindControl(String id) +9 CustomerDetailsEdit.OnPreRender(EventArgs e) in d:inetpubvhostsjavcentral.comhttpdocsUserControlsCustomerDetailsEdit.ascx.cs:60 System.Web.UI.Control.PreRenderRecursiveInternal() +86 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2041
Is anyone else having issues with SQL 2005 Books on line? Whenever I start it, I get a critical failure in Microsoft Document Explorer and then the application crashes. When it restarts, it won't display a document. When I click on the "what's in the report" (for the crash dump to send to M$), I get the following:
When I click on the links provided, it takes me to a page that says I probably have a root kit virus. I used sysinternals tools to validate that there are no rootkits.
I am running: Dell Latitude D505 (1 GB RAM) Windows XP (SP2, all updates) SQL 2005 (SP2)
I am also running: SQL 2000 (SP4) Visual Studio 6.0 (SP6) Visual Studio .Net 2003 MSDN Library (April 2004)
I am trying to apply SP2 to a 3 node cluster. Everything installs fine except the database services. I get the following error:
Product : Database Services (MSSQLSERVER) Product Version (Previous): 1399 Product Version (Final) : Status : Failure Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log Error Number : 29550 Error Description : MSP Error: 29550 The setup has encountered an error while Upgrading Components. The error: -2147019873 Error message: The group or resource is not in the correct state to perform the requested operation.
Lets say that I have a 3 tables: 1) Sku, 2) ReceiptDetail and 3) OrderDetail. In the last 2, is a Sku column which needs to refer to the Sku table. I create ForeignKeys in the ReceiptDetail & OrderDetail pointing to the Sku table as follows: Alter Table ReceiptDetail Add Constraint fk_ReceiptDetail_SkuKey Foreign Key (SkuKey) References Sku (SkuKey) On Update Cascade On Delete No Action; The first 'Alter' (for ReceiptDetail) works, but the second gives me the following message: Introducing FOREIGN KEY constraint 'fk_OrderDetail_SkuKey' on table 'OrderDetail' may cause cycles or multiple cascade paths. Specify ON DELETE NO ACTION or ON UPDATE NO ACTION, or modify other FOREIGN KEY constraints. This worked in Sql Server 2000, but not 2005. I just wanted the Sku updated in the all other tables when updated in the main Sku table. I guess that I could use a trigger, but shouldn't need to.
Hi, Let me start by saying that both of the servers in question are in an academic environment where optimal security isn’t the greatest concern. The first server is running Server 2003 and has IIS installed and SQL express. The web website which was designed in VS 2005 (with membership settings and a SQL Express database) works fine. When the same website is served from a similar server running Server 2003 and SQL Server 2005 I get an ERROR 26. The web server and the database server are on the same box. Does SQL Server 2005 have to be set up to serve a SQL server express database? Thanks, Jeff
Hi all,I'm trying to install sql 2005 standard edition on windows xp pro, I get the following errorfeatures specified are not valid for this versionAny idea how to fix that ?
Why would I get an SQL Server 2005 Error on a page when I'm not even trying to connect to an SQL database anywhere in my code? I'm using Visual Web Developer 2005 Express. I have no App_Data folder, nor do I need one because I'm not using a database.Error:An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
SQLExpress database file auto-creation error: The connection string specifies a local Sql Server Express instance using a database location within the applications App_Data directory. The provider attempted to automatically create the application services database because the provider determined that the database does not exist. The following configuration requirements are necessary to successfully check for existence of the application services database and automatically create the application services database: If the applications App_Data directory does not already exist, the web server account must have read and write access to the applications directory. This is necessary because the web server account will automatically create the App_Data directory if it does not already exist. If the applications App_Data directory already exists, the web server account only requires read and write access to the applications App_Data directory. This is necessary because the web server account will attempt to verify that the Sql Server Express database already exists within the applications App_Data directory. Revoking read access on the App_Data directory from the web server account will prevent the provider from correctly determining if the Sql Server Express database already exists. This will cause an error when the provider attempts to create a duplicate of an already existing database. Write access is required because the web server accounts credentials are used when creating the new database. Sql Server Express must be installed on the machine. The process identity for the web server account must have a local user profile. See the readme document for details on how to create a local user profile for both machine and domain accounts.
hello i am trying to install ms sql 2005 express on my vista sp1 machine. i get the wmi error TITLE: Microsoft SQL Server 2005 Setup------------------------------The SQL Server System Configuration Checker cannot be executed due to WMI configuration on the machine DEXXA-PC Error:2147749907 (0x80041013). For help, click: http://go.microsoft.com/fwlink?LinkID=2047...amp;EvtID=70342------------------------------BUTTONS:OK------------------------------the link is no help. i googled and found a few scripts that were supposed to fix the wmi error and it did for many people but not me. i tried the wmidiag.vbs from ms. i have done everything it asks. anyone know what else i can try?
Do you know how I can solve this error when connecting to sql server 2005 please?An error has occurred while establishing a connection to the server. When connecting to SQL Server2005, this failure may be caused by the fact that under the default settings SQL Server does notallow remote connections. (provider: SQL Network Interfaces, error: 26 - Error LocatingServer/Instance Specified)
have new sql 2005 install. I thought I setup the mail correctly. I setup an operator and could send test email to operator. I then setup a job to send email to the operator when job completes. Got the error below
Date 6/16/2006 8:45:57 AM Log SQL Agent (Current - 6/16/2006 8:45:00 AM)
Message [264] An attempt was made to send an email when no email session has been established
hello everyone,i meet a problem with sqlserver. i have a hp rx6600 server running windows 2003 sp2 for ia + sqlserver 2005 stardard edition for ia ,and i use sa user to login the server. recently, when the server works for two or three days,the client can't login the sqlserver ,and a reboot will resolve the problem,but after the same time ,the problem occers again. i check the error log in my server which is: SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: 172.16.8.41] Have anyone meet this problem before or had some idea about it ,pls give some advice , thank you very much!
Hi experts. I would like to ask for this error that I've encountered
(Error msg) Msg 5242, Level 22, State 1, Line 1 An inconsistency was detected during an internal operation in database 'smartapp'(ID:9) on page (1:28827). Please contact technical support. Reference number 7.
I have installed SQL 2005(Developer Edition) in Windows vista. While Installing I have choosen Mixed mode and i gave the password too.The installation was finised successfully. But i cant able to login It says "Login failed". I have applied Sp2 also.
Windows vista home edition SQL 2005 Developer edition.
What is the problem and How can solve this issue. Can any one help me..?
Has anybody seen this error. the SMTP somehow seems to work, but the SQL server is not able to send out notifications for jobs.
Message The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2007-12-10T08:41:06). Exception Message: Could not connect to mail server. (No connection could be made because the target machine actively refused it). )
I have searched a whole lot of web and nothing nothing nothing. Any help is welcome Regards Paresh Motiwala
I have a problem that about the Replication of the SQL SERVER 2005. If there are a hundred data in the delivery of replication ,but after they transmited fifty data ,the internet is disconnection.
The question is how about the rest of the undelivered data and the delivered data. Do the delivery data will be rollback? If it dosen't be rollback how dose the administrator of the database know the error of the replication of the data,the most important is how to know the data has not complete delivery. If it will be rollback and how do we check the error of the internet at immediately..
Can someone provide some troubleshooting for the following error I have during the replication setup on SQL 2005??
Thanks,
Frank
System Engineer
===================================
Cannot connect to LASC06.
===================================
Failed to connect to server LASC06. (Microsoft.SqlServer.ConnectionInfo)
------------------------------ Program Location:
at Microsoft.SqlServer.Management.Common.ConnectionManager.Connect() at Microsoft.SqlServer.Management.UI.ReplicationSqlConnection.ValidateConnection(UIConnectionInfo connInfo, IServerType server) at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 0 - No process is on the other end of the pipe.) (.Net SqlClient Data Provider)
------------------------------ For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=233&LinkId=20476
The error happened on SQL 2005 sp2 32bit servers. Can someone please help. Thanks very much.
Brian
Server Name: CDNPCCVS3CDNPCCPRODDB3, Job Name: DatabaseMaintenance.Subplan_1, Step Name: Subplan_1, Message: Executed as user: CDNPCCPRODzpcc_sqlsvc. ....3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 8:00:00 PM Error: 2007-12-22 00:56:32.60 Code: 0xC0024104 Source: Rebuild Index Description: The Execute method on the task returned error code 0x8007000E (Exception of type 'System.OutOfMemoryException' was thrown.). The Execute method must succeed, and indicate the result using an "out" parameter. End Error Error: 2007-12-22 03:11:01.83 Code: 0xC002F210 Source: Update Statistics Execute SQL Task Description: Executin
