I have been attempting to install Backup Exec 11D on a Win2K3 std server running Exchange 2003 Ent.
Used to have 10D installed and did an uninstall from add remove programs then tried to install 11D
When the setup runs it attempts to install the SQL 2005 Express and then fails with the dialog that pops up
SQL Server Setup unexpectedly Failed. For more information, review the setup summary log file in %ProgramFiles%Microsoft SQL Server90Setup BootstrapLOGSummary.txt
I have review the summary .TXT which contains
Microsoft SQL Server 2005 9.00.2047.00
==============================
OS Version : Microsoft Windows Server 2003 family, Standard Edition Service Pack 2 (Build 3790)
Time : Sun Feb 10 18:05:02 2008
When i attempted to connected to Microsoft SQL Server 2005 Express via ASP.NET 2.0 application, it seems to throw the following error.
I had set up the Protocols for Express (TCP/IP and Named Pipes are both enabled) to allow remote connections using both TCP/IP and named pipes. Login failed for user ''. The user is not associated with a trusted SQL Server connection.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Login failed for user ''. The user is not associated with a trusted SQL Server connection.
Source Error:
The source code that generated this unhandled exception can only be shown when compiled in debug mode. To enable this, please follow one of the below steps, then request the URL:
1. Add a "Debug=true" directive at the top of the file that generated the error. Example:
<%@ Page Language="C#" Debug="true" %>
or:
2) Add the following section to the configuration file of your application:
Note that this second technique will cause all files within a given application to be compiled in debug mode. The first technique will cause only that particular file to be compiled in debug mode.
Important: Running applications in debug mode does incur a memory/performance overhead. You should make sure that an application has debugging disabled before deploying into production scenario.
I've been trying to install the following update: Microsoft SQL Server 2005 Express Edition Service Pack 2 (KB 921896). I always recieve the following error: 2B22,
We have a prod server running SQL 2008 R2 SSRS and we are able to print SSRS reports fine. Â I believe RSClientPrint is part of the deployed image.We now have a test server running SQL2012 SSRS. Â We have deployed a AxIS GPO which should allow a silent install of the new RSClientPrint for non-administrators. Â We went the AxIS route as I was told some security patches can require a new print control so I want to avoid packaging, testing, and deploying updated print controls to thousands of machines.The problem is that we are still being prompted to install the print control when attempting to print a SSRS report from the test 2012 server.
I have a dataset that is between 40-50K records that has to go through a process that is pre-defined. SSIS works just fine with the smaller sets even up to 20K but this job keeps blowing up saying something along the lines of cannot write to recordset destination. Does this make sense to anyone? The sever is a 2 processor with 2GB of ram. Physical memory usage spikes to about 1.6GB during the run but the processor never really gets above 30% usage. Does this product just not scale yet?
First I am fairly new to SQL Server 2005 Clustering so this is why I was to see if any of you might be able to help me.
Are current setup is as follows:
CRM1 SERVER 2K3 R2 xxx.xxx.xxx.74
CRM2 SERVER 2K3 R2 xxx.xxx.xxx.75
HP MSA1000 xxx.xxx.xxx.75
MSDTC IP xxx.xxx.xxx.77
SQL INSTANCE xxx.xxx.xxx.78
Now are CRM guys are trying to connect to xxx.xxx.xxx.78 for there SQL instance or RDP into this ip address and they can’t…Now the question is should they be able yto logon to the SQL Instance via RDP?
Hi, i need help about restore a DB I did a backup of a database using SQL Server Management Studio, but when i try to restore my database now, i get this error:
TITLE: Microsoft SQL Server Management Studio ------------------------------
Restore failed for Server 'Athenas'. (Microsoft.SqlServer.Smo)
System.Data.SqlClient.SqlError: The media set has 2 media families but only 1 are provided. All members must be provided. (Microsoft.SqlServer.Smo)
What do i doing so bad?? Thanks for ur opinions and help. Regards ------------------------------------------
Can anyone help me to create a URL decode user defined function in SQL Server 2005? I want to use the method [System.Web.HttpUtility.UrlDecode] in .net framework, and I try to add it as a CLR function to SQL Server but always fail. It depends on [System.Web.dll], and when I try to create assembly [System.Web] using following scripts, it will fail:
CREATE ASSEMBLY [System.Web] FROM 'C:WindowsMicrosoft.NETFrameworkv2.0.50727System.Web.dll' WITH PERMISSION_SET = UNSAFE
Error: CREATE ASSEMBLY for assembly 'System.Web' failed because assembly 'System.Web' is not authorized for PERMISSION_SET = UNSAFE. The assembly is authorized when either of the following is true: the database owner (DBO) has UNSAFE ASSEMBLY permission and the database has the TRUSTWORTHY database property on; or the assembly is signed with a certificate or an asymmetric key that has a corresponding login with UNSAFE ASSEMBLY permission. If you have restored or attached this database, make sure the database owner is mapped to the correct login on this server. If not, use sp_changedbowner to fix the problem.
I have searched the MSDN and then add following scripts before mine:
ALTER DATABASE [DatabaseName] SET TRUSTWORTHY ON
CREATE ASYMMETRIC KEY SystemWebKey FROM EXECUTABLE FILE = 'C:WindowsMicrosoft.NETFrameworkv2.0.50727System.Web.dll' CREATE LOGIN CLRLogin FROM ASYMMETRIC KEY SystemWebKey GRANT UNSAFE ASSEMBLY TO CLRLogin
I have made numberous attempts to install SQL 2005 SP2 on my Developer version. When using windows update, it runs for about 30 minutes then fails. When I click the Failed Icon in WU panel, it returns a blank window.
I have googled this but found no pertinent solution.
Hi everyone i get an error messgae running the following code
DECLARE @mailist VARCHAR(max) SET @mailist='' SELECT TOP 1 @mailist=@mailist + email +';' FROM email.dbo.mytable SET @mailist=STUFF(@mailist,LEN(@mailist),1,'') SET @mailist='''' + @mailist + ''''
EXEC msdb.dbo.sp_send_dbmail @profile_name='my_mail_profile', @recipients=@mailist, @subject='mysubject', @body_format='html', @body= ' <html> <head> <title> problems with send_dbmail </title> </head> <body> this is not working </body> </html> '
The error says:
quote:
Syntax error in parameters or arguments. The server response was: 5.5.4 Invalid Address)
At the other hand, if i assign a straightforward @recipints address such as EXEC msdb.dbo.sp_send_dbmail @profile_name='my_mail_profile', @recipients=my@mail.com
A few months ago, I was trying to install SQL Server 2005 SP2 on a cluster (Active-Active), the Cluster has 3 instances, 2 lives in one node and the other one in the other node. When I try to make the deployment an error message appear, I do not have the error right now but it€™s something like €œCould not connect to the passive node, installation failed€?. The worst part of the error was all instances shut down and I couldn€™t bring on line and I have to reinstall all instances. I need to install SP2 but I€™m a little afraid fail again. Do you know the best way to deploy the SP2 on a cluster? Maybe move all instances in one node before install SP2? Can you help me with your comments. Do you think I have problems with the windows cluster?
I tried installing SQL 2005 Dev Edition on my Win 2000 Professional machine. That failed. But now I cannot send out emails or even open a simple Email task from DTS. This is something that worked perfectly fine before I attempted the SQL 2005 installation. It seems that the SQL 2005 installation somehow messed up the the MAPI profile. The exact error message that I get when trying to execute or open a Email task in DTS is: CAnnot load MAPI Interface layer for DTS. Please make sure that semmap90.dll is installed.
I am in the process of designing a database infrasture layout that can virtually scale to an very large number of servers in efforts to improve performance. The Scale-out architecture vs. grid computing (something like Oracle RAC) seems to be the way to go. It may take a lot more work up front, but it seems very flexible in the long run.
One of the issues that I am trying to tackle is how should I grow this thing. Right now, I have one single 4 way server running SQL 2005 Ent. edt. We are planning on getting a second server as well as a Enterprise level San solution.
With my 2 goals in mind (Scale out architecture and High Avail) should I bring this second server online as a passive cluster node, or should I partition out the data across both nodes. Will clustering even be part of my fault tolerence plan or should I use replication?
Its hard to find a good answer as what is the *best* way to make this happen.
I'm trying to learn some VB programming with the VB 2005 Express Absolute Beginner Series video tutorials (which I think is great) and have come across a problem that I can't solve.
When I follow the instructions in Lesson 9 (Databinding Data to User Interface Controls) my application will display the data from the database correctly and I can edit it (and as long as the debugger is running the data remains changed). However, the changes won't propagate back to the database. I don't get any error messages but after I edit the data, save (with the save button on the BindingNavigator toolbar), and end debugging the data in my database remains unchanged. When I use a MessageBox to show how many rows where edited/updated in the
I get the correct number back. I'm sure the problem is not due to coding errors since I've also tried running the accompanying Lesson 9 project file that can be downloaded from MSDN and the problem persists.
I'm using Windows XP SP2, SQL Server 2005 Express Edition and VB 2005 Express Edition. I've tried installing SQL Server 2005 Express with a number of different settings, including default settings, but it doesn't make any difference.
Would greatly appreciate any feedback on this as I'm keen to resolve this problem so I can get on with the next tutorial lesson.
HiIm trying to connect Visual Basic Express 2005 to a remote SQL Server Express 2005. I cant find how i can do that in VB.net Express.In Web developer there are no problem to connect to a remote SQL server but i cant find it in VB.net Express. The XP with the SQL server that i want to connect to is on the local network. Greatful for help!
This problem only occurs after deployment, not when debugging. In the table I am having a problem with I have an ID field designated as the primary key with the identity increment set to 1 and the identity seed set to 1. There is no data in the table when deployed. I can add records to the datagridview control but when I try updating the dataset I get this error indicating that the ID field already has a value of 1 present. If I close the application and re-start it, the exception no longer occurrs when I update the dataset. I am including the code to update the tables incase something is wrong there. Any suggestions?
Hi Guys, I created a Product database table using Visual Basic 2005 Express and SQL Server 2005 Express. I have just added a new column [Picture] to the database table, which of course, should store an image or picture of a product. I am writing to kindly ask you guys for help .
i) How do I include image files into this column [Picture]? ii) How do I get this image to display on Visual Basic 2005 Express form, so that when a product is selected the product image is displayed accordingly?
When I installed VS 2005, it installed the default version of SQL Server 2005 Express that ships with Visual Studio 2005 installer media.
How can apply SQL Server 2005 Express SP1 to update this existing instance?
Currently, if I run this query:
SELECT @@version
I get the following:
Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Express Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
After applying SP1, I should get 9.00.2047.00.
Should I just go to this link and download & install the SQL Server 2005 Express Edition SP1:
When the setup program tries to start the database service (the last step of installation), it indicates an error 29503.
The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually." The error is (17058)
1. Installed VB.NET IDE 2008 and SQL Server Compact 2005. IDE requires upgrade of database to 3.0 version which I allowed it to do. After the database was upgraded, I did an amount of coding work in the IDE and then tried to go back to do more database work in SQL. However the database then could not be opened in SQL Server Compact 2005. An error said that because it had been upgraded, it could not be read. It was requiring me to run 'upgrade.exe'. I had no idea what this meant and could find no upgrade available online. 2. Removed VB.NET IDE 2008 and installed 2005 instead. However, the file extension on the SQL Server Compact database is .sdf, but the IDE is requiring a .mdf extension. I have tried everything I can think of to get it to save or to have the desired extension, but I cannot.
Questions:
1. Do SQL Express 2005 and VB Studio Express 2008 work together? 2. If so, how?
It seems as though application each requires a different version of the database. If the database is usable in one, it is not usable in another.
I have a 2005 Express DB I wish to attach to using the 2005 Mgt Studio Client (Not the express version, but the full blown 2005 Mgt Studio Client from the SQL 2005 Standard Edition Install disk). Can this be done, or can I only use the 2005 Mgt Studio Express Edition Client?
If i have been using sql server 2005 express for developing my application and i decide to upgrade to sql server 2005 express with advanced services while still working on the same application, what will happen to my application's database. Can i be able to continue with my work with out any major regrets.
Hi all,Just wondering if SQL 2005 express edition can be connected remotely. I've set up SQL 2005 Express on a separate machine and am having trouble connecting to it from VWD when creating the websites. Currently I've set up ASP.NET 2.0 Framework on the remote machine with IIS6 using Windows Server 2003 Web Edition. And I am directly editing the website remotely on the server machine from my PC. Could someone please help me in setting up a remote connection from VWD to the SQL Server?I've enabled TCP/IP setting in the SQL Configuration Manager but still getting errors. Could this be an issue with Express Edition? Because if it is I also have a copy of SQL Server 2005 to install. Any direction to resolve in this issue would be greatly appreciated.PS. I'm new to this so pls bear with me. Thanks.
I use Visual Web Developer Express 2005 with SQL Server 2005 Express. With this combination I was able to create a new database.I can add tables, views etc.But no triggers....do you guys have an idea how I can add a new trigger?Please help!
This is a question about the movie collection starter So here it is:
I am running Vista RC1 (Build 5600) and vb express 2005
I downloaded and install SQL Server Express 2005 Edition SP2 - Since SQL Server Express 2005 Edition SP1 does not work with Vista
But when I try to run the collection app or if I try to download and install the Amazon version I get the following error message:
There was a problem loading data: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be cause by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
I need any advice you can give me to solve this problem, how to change the default settings, because I do not know where to start.
I have tried to install SQL Server 2005 Standard edition with CLUSTERING. I faced a problem and everything rolls back.
TITLE: Microsoft SQL Server 2005 Setup ------------------------------
SQL Server Setup was unable add user domain1xyz to local group domain1IT Security Admin-Group.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=setup.rll&EvtID=29512&EvtType=sqlca%5csqlsecurityca.cpp%40Do_sqlGroupMember%40Do_sqlGroupMember%40x6ba
I have refered to PostI=1659185 posted by Fly and it still won't be able to fix my problem.
I have added LOCAL SERVICE into the local group (SQLServer2005MSFTEUser$AAA$MSSQLSERVER), but it still can't work.
Please can someone help me on this. Thank a lot....
I tried to install SQL Server 2005 (x64) Standard Edition on Windows Server 2003 R2 (x64) Standard Edition. My box meet the requirement. But I got the following error when the installing progress was just about to begin:
Error 1016:Could not access network location k.3643236F_FC70_11D3_A536_0090278A1BB8]URTVersio.
(this is exactly what i saw in the system log)
what does it mean?? i am totally confused...what the hell is the k.3643236F_FC70_11D3_A536_0090278A1BB8]URTVersio????
