SQL 2005 Import / Export Error 0xc0202009

Nov 16, 2007



When I attempt to import a table from another SQL 2005 server to mine, I recieve the following error:


- Pre-execute (Error)



MessagesError 0xc0202009: Data Flow Task: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
(SQL Server Import and Export Wizard)

Error 0xc0202025: Data Flow Task: Cannot create an OLE DB accessor. Verify that the column metadata is valid.
(SQL Server Import and Export Wizard)




Error 0xc004701a: Data Flow Task: component "Destination - vwQualitySurvey" (226) failed the pre-execute phase and returned error code 0xC0202025.
(SQL Server Import and Export Wizard)


Is there anything that I can do to try and rectify this?

View 2 Replies


ADVERTISEMENT

SSIS Import Error 0xC0202009

Nov 27, 2007



HI I'm still in the middle of this 2000 to 2005 64 bit migration!! I have managed to create an oledb connection to my informix db. Within the data flow I wanted to create a simple data pump from my infdormix db to S2K5 db.

Now in the OLEDB source I have done a select froma table to which I can view. I also set the always use default code page to true.


On the error box I get


[OLE DB Source [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Live@jvert07_se.service" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error 1 Validation error. Reason code: OLE DB Source [1]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Live@jvert07_se.service" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. Cerptransfer.dtsx 0 0


Also when I try to execute it I get


Package Validation Error
------------------------------
ADDITIONAL INFORMATION:
Error at Reason code [OLE DB Source [1]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Live@jvert07_se.service" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error at Reason code [DTS.Pipeline]: component "OLE DB Source" (1) failed validation and returned error code 0xC020801C.
Error at Reason code [DTS.Pipeline]: One or more component failed validation.
Error at Reason code: There were errors during task validation.
(Microsoft.DataTransformationServices.VsIntegration)


Can anyone help as i'm dead in the water now.

many Thanks

robert

View 11 Replies View Related

Import/Export Causes Fatal Error- In Server 2005 Eval. Version

Jan 27, 2006

Have the 2005 Enterprise Evaluation version. Trying to import data from a flat file to DB table. Tried running wizard from designer studio and from creating a data flow in SBIDS

Either way I am able to setup and start excution and then bombs with a fatal error.

"SQL Server Import and Export Wizard has encountered a problem and needs to close. We are sorry for the inconvenience."

Asks to Debug or close.. Tried installing on 2 other machines and having same issue. Tried several different data files and tables same issue.

Does anyone know if this is a bug? Am I missing something with permissions?

Thanks

Bill Bialas

View 1 Replies View Related

Error Trying To Import MS Access 2003 Database Via SQL Server Import And Export Wizard - Too Many Sessions Already Active

Nov 29, 2006

I am trying to simplify a query given to me by one of my collegues written using the query designer of Access. Looking at the query there seem to be some syntax differences, so to see if this was the case I thought I would import the database to my SQL Server Developer edition.

I tried to start the wizard from within SQL Server Management Studio Express as shown in one of the articles on MSDN which did not work, but the manual method also suggested did work.

Trouble is that it gets most of the way through the import until it spews forth the following error messages:

- Prepare for Execute (Error)
Messages
Error 0xc0202009: {332B4EB1-AF51-4FFF-A3C9-3AEE594FCB11}: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Could not start session. Too many sessions already active.".
(SQL Server Import and Export Wizard)

Error 0xc020801c: Data Flow Task: The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0202009.
(SQL Server Import and Export Wizard)

Error 0xc004701a: Data Flow Task: component "Source 33 - ATable" (2065) failed the pre-execute phase and returned error code 0xC020801C.
(SQL Server Import and Export Wizard).

There does not seem to be any method of specifying a number of sessions, so I don't see how to get round the problem.

Does anyone know how I can get the import to work?

View 2 Replies View Related

Import Export Sql 2005 Question

Dec 28, 2007

i have a comma delimited file, and when i have to use commas inside of the data i use quotes to qualify that. but sql import export is ignoring the quotes and delimiting on every comma. does anyone know how to get around this.... for example in access i can have a comma delimited file and there is a drop down list  that says "text qualifier" and i can pick ' or " .... is there anyway to do something like this in sql

View 6 Replies View Related

Import/export In SQL Server 2005, Where Is It?

May 20, 2008

I can not find "import/export" in SQL Server 2005 "microsoft SQL Server Management Studio Express"  How do I move a database from SQL Server 2000 to SQL server 2005?

View 5 Replies View Related

SQLServer 2005 -Import/Export

Sep 8, 2006

I need to export tables/views/stored procs and user functions from one DB to another on a regular schedule. It would be good if I can make a deployable application so that it can be scheduled with sql agent.
I tried to use DTSWizard with Management studio but it does not seem to export stored procedures. Can someone walk me though this ?
Thankyou

View 1 Replies View Related

Where Is Export Import Option In 2005

Sep 6, 2007

hi all,
i didn't found the export import option in sql server 2005. experts, please guide me where can i found this?

Vinod
Even you learn 1%, Learn it with 100% confidence.

View 12 Replies View Related

Import /export DTC Licensing Error

Dec 6, 1999

hi all,
I'm trying to import export a database into another server
and i get an error:
"The license for the installation of the Microsoft SQL Server on your source and destination coonectins does not permit the use of DTS to transform data.
refer to your license agreement for more information..."


Can anyone tell me a workaround to this problem???

thank you

View 2 Replies View Related

DTS Import/Export Data Error

Jun 6, 2007

Hello everyone,

I'm having difficulties in Importing data using DTS with a SQL Query.

The Sql query :
SELECT *
FROM Organisations
where Organisations.OrganisationID = 1

I receive this Error Message :
Error Source : Microsoft OLE DB Provider for SQL Server

Error Description : Deferred prepare could not be completed.
SELECT permission denied on object 'Organisations', database 'souce_db', owner'dbo'.

Context : Error calling GetColumnInfo. Your Provider does not supprt all the interface/methods required by DTS.

Can anybody help me . Thanks

View 1 Replies View Related

Error When Using SQL Import / Export Wizard

Jul 5, 2006

I am attempting to import data from an access db using the wizard and I get the following error when the wizard attempts to save.


- Initializing Data Flow Task (Success)
- Initializing Connections (Success)
- Setting SQL Command (Success)
- Setting Source Connection (Success)
- Setting Destination Connection (Success)
- Validating (Success)
- Saving (Error)
Messages
* Error 0xc0208220: Data Flow Task: Unable to save to XML.
(SQL Server Import and Export Wizard)


Does anyone have any ideas about how to correct this?

View 1 Replies View Related

Import/Export In SQL Server 2005 Express

Nov 29, 2005

Where is that neat little "Import/Export" DTS Wizard like I had in SQL Server 200 Developer?Or am I going to have to mess with the script generation features?

View 2 Replies View Related

Import And Export SQL 2005 Maintenance Plan

Nov 8, 2006

I had created a maintenance plan and configure and scheduled my maintenace plan to run. I would like to save this package as a file into a source control. SO I use SSIS to export the package under stored packages->MSDB->Maintenace Plan. After that, I wanted to test my import process. So I deleted the packages under SSIS ->stored packages->MSDB->Maintenance plan and I use the import to add the package from my previously exported package stored in a file .dtxs extention.

So the problem is, after I imported my package. I lost the configured schedule and the job runs without doing anything. When I try to go in and make changes to the package, by adding a new schedule under SQL server -> management->maintenance plan. I receive a odd error message and it doesn't allow me to save the package.. The error message I got is...."GUID should contain 32 digits with 4 dashes (xxxxx-xxx-xx...)"

So my questions are: 1. why did the re-import loses the originally configure job run schedule. 2. why doesn't the re-import package works by backing up database as it was first setup. 3. why I cannot re-edit this package and saving the package error out?

Thank you for reading and for your helps! --Jon

View 3 Replies View Related

Help Import Export Wizard SQL Server 2005

Jul 13, 2007

Hi! I have XP sp2, with SQL server 2005 Developer Edition 9.00.3054.00 and also have Microsoft SQL Server Express Edition 9.00.3042.00, well my problem alway I want import data into any server from any data source I recive this message:



TITLE: SQL Server Import and Export Wizard
------------------------------

The operation could not be completed.

------------------------------
ADDITIONAL INFORMATION:

Could not load file or assembly 'System.EnterpriseServices.Wrapper.dll' or one of its dependencies. The system cannot find the file specified. (System.EnterpriseServices)

------------------------------

Could not load file or assembly 'System.EnterpriseServices.Wrapper.dll' or one of its dependencies. The system cannot find the file specified.

------------------------------

The system cannot find the file specified. (Exception from HRESULT: 0x80070002)

------------------------------
BUTTONS:

OK
------------------------------




I have this name space but, I try for many ways and I can't import data in my server, What can I do???



Thanks a lot.

View 6 Replies View Related

MS SQL 2005 Import Export Wizard - SAP R/3 Connection

Oct 31, 2007

Hi

I am trying to import SAP R/3 Data to MS SQL 2005 with SQL Server Import and Export Wizard (.net framework Data Provider for mySAP Business Suite. )

for ie i have to import data from mara table.
System Number of the R3 environemnt 00

but i am getting error at the time i am making connect from MS SQL 2005 to SAP R/3 ...

Following is the error
The operation could not be completed
Additional information
--> Missing SYSNR = ... in connect_param in RFcOpenEx(Microsoft.Adapter.SAP.SAPProvider)
|--> Missing SYSNR = ... in connect_param in RFCOpenEx ( GInvoker)

Can any one explain me where i am going wrong?


View 11 Replies View Related

Pre-execute Error In Simple Import/export

Mar 17, 2006

I am trying to copy data from a SQL Server 2000 DB to SQL Server 2005 DB using the import/export wizard in SQL Server Management Studio. The two databases are not identical with different table names and different columns but I thought I had set up all the right mappings and had set the 'Enable identity insert' option. When I ran the wizard it errored at the Pre-execute phase. I simplified the wizard down to one table and only as couple of varchar columns and this also errored in the same way. The error report is detailed below.

For reference the SQL2000(ent. edn) DB is on a windows 2000 server and the SQL2005(dev. edn) DB and the management studio are both on my WinXPSP2 workstation.

Could somebody explain why these errors have occured and more importantly how to rectify the problem?

Many thanks,
Michael.



Operation stopped...

- Initializing Data Flow Task (Success)

- Initializing Connections (Success)

- Setting SQL Command (Success)

- Setting Source Connection (Success)

- Setting Destination Connection (Success)

- Validating (Warning)



Messages

Warning 0x80047076: Data Flow Task: The output column "DateAdd" (23) on output "OLE DB Source Output" (11) and component "Source - tccNewsArticles" (1) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
(SQL Server Import and Export Wizard)


Warning 0x80047076: Data Flow Task: The output column "DateChg" (26) on output "OLE DB Source Output" (11) and component "Source - tccNewsArticles" (1) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
(SQL Server Import and Export Wizard)


... NOTE: I have removed the rest of the warnings as they were the same as above (many of them).

- Pre-execute (Error)



Messages

Error 0xc0202009: Data Flow Task: An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
(SQL Server Import and Export Wizard)


Error 0xc0202025: Data Flow Task: Cannot create an OLE DB accessor. Verify that the column metadata is valid.
(SQL Server Import and Export Wizard)


Error 0xc004701a: Data Flow Task: component "Destination - Nrs_NewsArticles" (112) failed the pre-execute phase and returned error code 0xC0202025.
(SQL Server Import and Export Wizard)


- Executing (Success)

- Copying to [NereusV2_1].[dbo].[Nrs_NewsArticles] (Stopped)

- Post-execute (Stopped)

- Cleanup (Success)



Messages

Information 0x4004300b: Data Flow Task: "component "Destination - Nrs_NewsArticles" (112)" wrote 0 rows.
(SQL Server Import and Export Wizard)




View 1 Replies View Related

SAP - SQL SERVER Import && Export Wizard Error

Nov 12, 2007

I am trying to import data from SAP through SQL SERVER Import & Export Wizard.... but its throughing following Error:
Copying to [LATPRO].[dbo].[RESB] (Error)

I went through couple of sites, as well as SQL help file and as asked increased my virtual memory still i am getting same error, does anyone know anything regarding aforesaid problem??





MessagesInformation 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)


Error 0xc02090f5: Data Flow Task: The component "Source - Query" (1) was unable to process the data.
(SQL Server Import and Export Wizard)


Error 0xc0047038: Data Flow Task: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Source - Query" (1) returned error code 0xC02090F5. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)


Error 0xc0047021: Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
(SQL Server Import and Export Wizard)


Error 0xc0047039: Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
(SQL Server Import and Export Wizard)


Error 0xc0047021: Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
(SQL Server Import and Export Wizard)

View 6 Replies View Related

Exec Pkg Task: Error 0xC0202009 While Preparing To Load The Package. An OLE DB Error Has Occurred. Error Code: 0x%1!8.8X!.

Feb 21, 2007

I cannot execute a package by using Execute Package task.
I supplied sa credentials to connection manager, and it shows the list of Packages on SQL Server but when running the task it says

Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!.



Any clue ?


Thanks,
Fahad

View 1 Replies View Related

Error When Attempting To Use SQL Server Import And Export Wizard

Sep 18, 2006

I'm unable to use SSIS packages after installing SQL Server 2005. Specifically when I first loaded a new Integration Services project in SQL Server Business Intelligence Development Studio the default SSIS package could not load, I get Package.dtsx in my tabbed document view but in the body of this window is a error message: "Microsoft Visual Studio is unable to load this document. QI for IEnumVARIANT failed on the unmanaged server."

If I try to use the SQL Server Import and Export Wizard shortly after the window to select your data source I get a pop-up error message:



This wizard will close because it encountered the following error:

For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.42&EvtSrc=Microsoft.SqlServer.Management.UI.WizardFrameworkErrorSR&EvtID=UncaughtException&LinkId=20476

------------------------------
ADDITIONAL INFORMATION:

QI for IEnumVARIANT failed on the unmanaged server. (CustomMarshalers)



Anyone have any ideas on how I can resolve this?

View 1 Replies View Related

Import/Export Records Between Two Identical Databases In SQL Server 2005

Sep 28, 2007

Hi,Currently, I am developing an application for my client. The issue is that the client has the office and warehouse which are in different locations. He wants the application run and updated all the data in to a database (called warehouse database). Every month, all records in warehouse database will be synchronized to another database which is identical with the warehouse database but it is run in his laptop at the office. Since networking is not an option, I have to create two identical database like this. Does any one know what is the good solution to this? Is there any synchronize feature in SQL Server 2005?Many thanks, 

View 1 Replies View Related

Sql Server 2005 Express: Export/Import Content Of A Table

Apr 3, 2008

 I want to export data in a table from one database to another database. And I would like it bo be clone of the source table, if it's possible. Is there any tools out there that can help me with this or do I have to write my own code?Is it possible to query the database to get all columns and datatypes for å requested table? If possible, can you give me an example?If I have to write a tool myself I guess I would do something like this: Export - Query the database for columns and datatype for the requested table. Dynamically generate a query to retrieve all rows from the table and save it to an xml file. Import - Turn off the Identity Increment, loop through the xml file and generate insert queries to insert a clone of each row, turn off the Identity Increment. Viola! If programming only could be that simple :-) Regards, Sigurd 

View 5 Replies View Related

Import Excel File Into Dropdownlist Then Export To Sql Server 2005

Jun 13, 2006

i am handling a project where user can choose the excel file and the field in the excel file to export into sql server 2005. which mean there will be dropdownlist where the user can choose the field and so on. anyone know how to do this?

View 2 Replies View Related

SQL Server 2005 Import/Export Not Copying Stored Procedures

Apr 23, 2006

Hi,In SQL 2000 if I wanted to take a complete copy of another running sqldatabase all did was create a new database locally and right-click itand select import and point to another database and click copyeverything (stored procedures as well) and it did it for. I can't seemto find the same functionality in SQL 2005. You can copy tables andviews but not the whole database. Is there another way of doing this?Our SQL database is hosted externaly and they recommend using theimport/export feature to do it. Does anyone know I can copy everything(such stored procedures, data table relations...etc)TanksMA.

View 1 Replies View Related

Data Migration Using Import/export Wizard SQL 2000 To SQL 2005

Mar 16, 2007

I am trying to import data from SQL 2000 to SQL 2005

The Data schemas are the same in both (tables, relationships, key and triggers).

Using the wizard I am trying to import data from SQL 2000 to SQL 2005. The issue I face is to manage the Idenity columns. I do not want the identity values from the SQL 2000 DB which may be at say 5000, instead I want to use the identity values from the SQL 2005 database which will problably start at 1

Is there a way to do this, should I use a custom query instead of a direct table dump. If using a custom query do I need to just specify a Select query or does it have to be a specific "INSERT INTO Table ..." type query

If I do import the data directly with Identity "ON" how can I advance the identity column value to current +1 on the SQL 2005 table.

Thanks

javahar

View 3 Replies View Related

Import Export Wizard - Syntax Error In Preview && Execution

Jan 3, 2008

Source: MS SQL Server 6.5
Destination: MS SQL Server 2005 (SP2 installed)
Suppl Ver Info: Microsoft.SqlServer.MaintenancePlanTasks.dll (ver 9.0.3043.0)


Desc:
When copying one table from source to destination (using import export wizard), the following error shows. However, when using query select * from tbl_1 can shows preview correctly. (but still need to save as SSIS, and change codepage property before it works)


===================================

The preview data could not be retrieved. (SQL Server Import and Export Wizard)

===================================

Line 1: Incorrect syntax near '['. (Microsoft OLE DB Provider for SQL Server)

------------------------------
Program Location:

at System.Data.OleDb.OleDbDataReader.ProcessResults(OleDbHResult hr)
at System.Data.OleDb.OleDbDataReader.NextResult()
at System.Data.OleDb.OleDbCommand.ExecuteReaderInternal(CommandBehavior behavior, String method)
at System.Data.OleDb.OleDbCommand.ExecuteReader(CommandBehavior behavior)
at System.Data.OleDb.OleDbCommand.System.Data.IDbCommand.ExecuteReader()
at Microsoft.SqlServer.Dts.DtsWizard.Preview.LoadPreview()

When executing the wizard, the following error shows (the table exists, of course)


===================================

Could not connect source component.

Error 0xc0202009: Source - tbl_1[1]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E37.


Error 0xc02020e8: Source - tbl_1[1]: Opening a rowset for "[db_1].[sch_1].[tbl_1]" failed. Check that the object exists in the database.
(SQL Server Import and Export Wizard)

===================================

Exception from HRESULT: 0xC02020E8 (Microsoft.SqlServer.DTSPipelineWrap)

------------------------------
Program Location:

at Microsoft.SqlServer.Dts.Pipeline.Wrapper.CManagedComponentWrapperClass.ReinitializeMetaData()
at Microsoft.SqlServer.Dts.DtsWizard.Execute.SetSourceConnection(Exception& ex, TransformInfo ti)




Exception from HRESULT: 0xC02020E8 (Microsoft.SqlServer.DTSPipelineWrap)


Could anybody please kindly help me on that?

View 2 Replies View Related

SQL Server Managment Studio Express 2005 Import/Export Wizard

Nov 29, 2006

I've created a new database and restored the database from a backup. I'm wanting to import raw data from an excel spreadsheet into the tables of the new database.

When I right click on the database, and hover over tasks the import/ export data menu options are not in the menu.The menu items ends at 'Generate Scripts'.

I'm connected on a local instance to a registered server.

Can anyone advise?

View 9 Replies View Related

SQL Server Express 2005 / ESRI ArcSDE Personal- How Do I Import/Export Data?

Nov 21, 2007

Greetings.

Our company is planning to upgrade to ESRI's brand new ArcSDE Personal edition and SQL Server Express 2005 platform to do GIS work for our clients. We are not in a position at this time to migrate to the full ArcGIS Server and SQL Server 2005 platform. We currently use a Microsoft Access 2003 relational database, and have no intention to move to Access 2007.

ArcSDE Personal cannot connect to SQL Server 2005, but it is able to connect and work with SQL Server Express 2005.

In SQL Management Studio Express, we were unable to find any feature that would allow us to import and export data to/from SQL Server Express. This is rather unusual, as we need to test how SQL Server Express will handle import and export data. In Microsoft Access we simply right click and choose import or export in the database window. Easy as pie. We ran the upsize wizard in Microsoft Access to migrate our data. But after that, our GIS team was pretty much stuck.

My question is, how does one import/export data to/from SQL Server Express? Do we need to install a missing component? Is scripting required? Or should we wait until we are able to acquire the SQL Server 2005?


D. Schmid, M.Sc.
North/South Consultants Inc.
Winnipeg, Canada

View 5 Replies View Related

Import And Export Data Wizard Missing In SQL Server 2005 Express Edition

Feb 9, 2007

After some weeks evaluating tools and platforms for developing an application, I decided to move to SQL Server 2005 Express Edition. Everything was fine till last night, when after creating my tables, I needed to populate them. I tried to find the Import and Export Data Wizard that SQL Server 7.0 and 2000 used to have, but great was my surprise when I found -  in this forum - a post that said that it's not available in the Express Edition.

I'll have to move back in time (what I hate) to remember the way BCP worked. Can somebody post some examples to not start from zero ?  Does anybody know a third party visual tool that can import/export data from text files to a SQL Server DB via ODBC ?

What's the reason it was not included in the EE ?

THanks !

View 14 Replies View Related

Error: The ProcessInput Method On Component OLE DB Destination (513) Failed With Error Code 0xC0202009

Mar 22, 2007

I'm trying to create a simple Data transfermation. I have a flat file that came of a unix server.. it's 177 bytes wide.. thought it was 175, but when I created the flat file connector, I could see some extra characters on the end.



My output is going to be an excel spreadsheet, I only want two columns from the input. I created an oledb jet 4.0 connection. and followed instructions from here :

http://aspalliance.com/889_Extracting_Data_from_a_Flat_File_with_SQL_Server_2005_Integration_Services

to create my datafow.



On my first attempt to dataflow, I ran into unicode errors and had to do this:



ran into a problem with unicode errors. went to the source for the flat file. for the output column in question changed to Unicode string [DT_WSTR].



When I run , here are the errors I get:

[OLE DB Destination [513]] Error: An OLE DB error has occurred. Error code: 0x80040E09. [DTS.Pipeline]

Error: The ProcessInput method on component "OLE DB Destination" (513) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.

[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0202009.

[GanchoFileSource [1]] Information: The total number of data rows processed for file "\ammia01dev04D$JCPcpmgancho_venta_20070321.sal" is 19036.

[GanchoFileSource [1]] Error: Setting the end of rowset for the buffer failed with error code 0xC0047020.

[DTS.Pipeline] Error: The PrimeOutput method on component "GanchoFileSource" (1) returned error code 0xC0209017. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.

[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.


View 4 Replies View Related

SQL Tools :: Import Export Wizard Default Data Source Causing Error / Crash

Sep 1, 2015

I have several versions of SQL Server and have been using SQL 2008 on a regular basis due to this issue. Our SQL 2014 when I do the Import Data process, it opens up the dialog window, hit next, and the data source is currently defaulting to ".NET Framework Data Provider for IBM i" - when it does this it immediately errors out with:

"An error occurred which the SQL Server Integration Services Wizard was not prepared to handle.

Additional Information:
> Exception has been thrown by the target of an invocation (mscrolib)
>> Failed to find or load the registered .NET Framework Data Provider (System.Data)"

It immediately crashes/closes the Import/Export wizard with me unable to change the data source to what I need it to be.

My 2008 defaults to SQL Server Native Client 10.0 and does allow me to change to that same option (at which point it errors) but it does not close the wizard.

I need a way to either:

> Default the starting Data Source to be something else
> Fix whatever error is causing it to crash - I am at a loss as to what the error is looking for
> Not have the wizard crash whenever it defaults to this source.

Any of the above solutions would work fine - but at the moment I am unable to use the Import/Export wizard at all in SQL 2014.

View 3 Replies View Related

SQL Server Compact Edition Sdf As Data Source In SSIS Import And Export Wizard - Error

Jul 31, 2007



Should I be able to use a SQL Server Compact Edition sdf file as the data source for the SSIS Import and Export Wizard?

When I select the .net Framework Provider for compact Edition from the data source drop down, I get a message box with "An error occured which the SSIS Wizard was not prepared to handle. Exception has been thrown by the target of an invocation. (mscorlib) Specified method is not supported. (System.Data.SqlServerCe)"

We have a user with a sdf file that will no longer sync, so we wanted to get her data from sdf file tables into SQL Server tables quickly and easily. Since the SSIS wizard wouldn't work with the sdf data source, we copied SQL Server Mgmt Studio query results into an Excel spreadsheet via the Clipboard, them imported those records with SSIS. But we need a repeatable process in case this happens in the future.

We tried to reinitialize her merge replication subscription with SQL Server Mgmt studio, and with C# code, but none of that would work.

How many MS data provider options are available for SQL Server compact edition? I see ".Net Framework Data Provider for Microsoft SQL Server Compact Edition" in the SSIS data source drop down, but shouldn't I also see an OLE-DB Provider for SQL Server Compact Edition?

This is all on my XP workstation where I can successfully write C# code for SQL Server Compact data access with Assembly = System.Data.SqlServerCe = C:Program FilesMicrosoft Visual Studio 8Common7IDEPublicAssembliesSystem.Data.SqlServerCe.dll. So I think I have the proper tools installed.

Thanks.

View 1 Replies View Related

Error 0xc0202009 For Importing Access97 Into Sql

Mar 8, 2006

We have an Access97 database with 122 tables. I try to use import and export wizard to import the data from access into SQL 2005 database. I find an interesting problem. When select all tables, the wizard give following errors:

Pre-execute (Error)
Messages
Error 0xc0202009: {DBD1EAB5-7865-4B89-A7BB-DDC8507D8119}: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Unspecified error".
(SQL Server Import and Export Wizard)

Error 0xc020801c: Data Flow Task: The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0202009.
(SQL Server Import and Export Wizard)

Error 0xc004701a: Data Flow Task: component "Source 64 - PlanClasses" (5206) failed the pre-execute phase and returned error code 0xC020801C.
(SQL Server Import and Export Wizard)

But if I divide importing as 2 steps:
1. import all tables before PlanClasses, it works.
2. import all tables after PlanClasses including PlanClasses, it works.

If I just import PlanClasses itself, it works, but I can not import all tables at once. Interesting thing is if I just unselect PlanClasses, it will have same error at the class right after PlanClasses. Is there size limitation when doing import at once?

View 5 Replies View Related

SQL Server Import And Export Wizard Fails To Import Data From A View To A Table

Feb 25, 2008

A view named "Viw_Labour_Cost_By_Service_Order_No" has been created and can be run successfully on the server.
I want to import the data which draws from the view to a table using SQL Server Import and Export Wizard.
However, when I run the wizard on the server, it gives me the following error message and stop on the step Setting Source Connection


Operation stopped...

- Initializing Data Flow Task (Success)

- Initializing Connections (Success)

- Setting SQL Command (Success)
- Setting Source Connection (Error)
Messages
Error 0xc020801c: Source - Viw_Labour_Cost_By_Service_Order_No [1]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0014019. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
(SQL Server Import and Export Wizard)

Exception from HRESULT: 0xC020801C (Microsoft.SqlServer.DTSPipelineWrap)


- Setting Destination Connection (Stopped)

- Validating (Stopped)

- Prepare for Execute (Stopped)

- Pre-execute (Stopped)

- Executing (Stopped)

- Copying to [NAV_CSG].[dbo].[Report_Labour_Cost_By_Service_Order_No] (Stopped)

- Post-execute (Stopped)

Does anyone encounter this problem before and know what is happening?

Thanks for kindly reply.

Best regards,
Calvin Lam

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved