SQL 2005 Problems - SQLDUMPER In My Event Log
Jan 26, 2006
I upgraded my Databases today with SQL SERVER 2005, initially this stopped the SQL Agents from working on port 1433, I changed the port to 1434 and now it works fine!!
Howerver I am gettin lots of error messages in my event viewer as follows.
Source: SQLDUMPER
Event Description:
EventType sql90exception, P1 reportingservicesservice.exe, P2 9.0.1399.0, P3 434f5d27, P4 sqldumper_unknown_module.dll, P5 0.0.0.0, P6 00000000, P7 0, P8 1b20fedd, P9 00000000, P10 NIL.
Can anyone help please!! what does this all means and how will it affect my server, is this going to affect veritas backup exec also?
Kind Regards
Randine Perry
View 1 Replies
ADVERTISEMENT
Jun 8, 2006
Hi
I have been reading KB 917825 about SQLDumper and have the following questions:
The article explains that we can automatically produce a dump in a clustered environement and explains how to set it up. It doesn't mention however how to set it up in a standalone environment . However it mentions the trace flags 2540 to 2559, is this what we need to set as they are also not documented?
Also there are various parameters in Analysis Services for the same thing which are not documented.
The reason for asking is because if we have a failure we would have to set this up and then wait for a second failure before we can analysis it. This would not please a few teams where I work.
Much appreciated
Steve
View 4 Replies
View Related
Jan 28, 2006
I installed SQL Server 2005 standard on a SBS box last night and now in the event log I'm seeing this error message a lot:
EventType sql90exception, P1 reportingservicesservice.exe, P2 9.0.1399.0, P3 434f5d27, P4 sqldumper_unknown_module.dll, P5 0.0.0.0, P6 00000000, P7 0, P8 00e5fe4d, P9 00000000, P10 NIL. the event ID is 5000
This will be followed by the next two items:
Bucket 04183268, bucket table 5, EventType sql90exception, P1 reportingservicesservice.exe, P2 9.0.1399.0, P3 434f5d27, P4 sqldumper_unknown_module.dll, P5 0.0.0.0, P6 00000000, P7 0, P8 00e5fe4d, P9 00000000, P10 NIL. The event id is 5001
Bucket 04183268, bucket table 5. the event ID is 1010
I'd like to know what these are and how to correct them if anyone can point me in the right direction.
Thank you in advance,
Chuck
View 1 Replies
View Related
Apr 3, 2007
Hi,
I have the following problem:
Anytime I`m starting the PC, the following message appears:
"SQLDUMPER library failed to initialize.....TRY TO RE-INSTALL THE FILE"
Could anyone help me deal with this? What should I do?
thank you, Enno
email: ebozdo@yahoo.com
View 7 Replies
View Related
Apr 12, 2008
when i start up my computer it displays the message sqldumper library failed initialization. your installation is either corrupt or has been tampered with. uninstall then rerun setup. what do i do?
View 5 Replies
View Related
Jan 27, 2006
Hi,
I am posting this for a colleague of mine. Any thoughts or recommednations?
"Is there any way for me to analyze the sqldumper files? One of my pipeline components is causing SSIS to dump and I'm trying to key in on what may be causing the issue. "
Thanks,
- Joel
View 1 Replies
View Related
Apr 29, 2007
I kept getting an Error message saying to Unistall SQLDUMPER Library & then reinstall it. I've gotten all the way up to Unistalling it, but now I cannot reinstall it. Where do I have to go to do so & which SQL Server do I install? I'd greatly appreciate it alot if someone would help me out!
Thanks alot,
Danielle L Smitheman
View 72 Replies
View Related
May 9, 2007
Hi All,
When I start executing my package a SQLDumper.exe pops up and Stops the package execution.
In addition,SQLDumper.exe creates a SQLDUMPER_ERRORLOG.log file at my Desktop with the following content
05/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Input parameters: 4 supplied05/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ProcessID = 255205/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ThreadId = 005/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Flags = 0x005/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDumpFlags = 0x005/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, SqlInfoPtr = 0x0100C5D005/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, DumpDir = <NULL>05/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExceptionRecordPtr = 0x0000000005/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ContextPtr = 0x0000000005/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExtraFile = <NULL>05/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, InstanceName = <NULL>05/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ServiceName = <NULL>05/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 11 not used05/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 15 not used05/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 7 not used05/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDump completed: C:Program FilesMicrosoft SQL Server90SharedErrorDumpsSQLDmpr0032.mdmp05/09/07 14:09:55, ACTION, DtsDebugHost.exe, Watson Invoke: No
Thanks in advance
View 4 Replies
View Related
Sep 20, 2006
Hello....I have just installed the trial copy of SQL 2005 server and updated with SP1 as well as post SP1 hotfixes.
However, when I try doing sample training material on SSIS, if I try to output to any type of destination output (flat file, excel, access, localhost SQL database) it always does a SQLDUMPER on me and never finishes....I always have to stop the debugger to get out of it.
What pointers can be given to troubleshoot symptoms given above ?
Thanks.
SQLSSIS
View 2 Replies
View Related
Jun 2, 2015
Recently we migrated our environment to 2012.
We are planning to implement Xevents in all the servers in place of Trace files and everything is working fine.
Is it possible to configure Extended event to trigger a mail whenever any event (example dead lock) occurs.
I have gone through so many websites but i never find.
View 13 Replies
View Related
Oct 25, 2011
My SQL Server 2005 SP4 on Windows 2008 R2 is flooded with the below errors:-
Date  10/25/2011 10:55:46 AM
Log  SQL Server (Current - 10/25/2011 10:55:00 AM)
Source  spid
Message
Event Tracing for Windows failed to send an event. Send failures with the same error code may not be reported in the future. Error ID: 0, Event class ID: 54, Cause: (null).
Â
Is there a way I can trace it how it is coming? When I check input buffer for these ids, it looks like it is tracing everything. All the general application DMLs are coming in these spids.
View 2 Replies
View Related
Apr 8, 2008
I have been testing with the WMI Event Watcher Task, so that I can identify a change to a file.
The WQL is thus:
SELECT * FROM __InstanceModificationEvent within 30
WHERE targetinstance isa 'CIM_DataFile'
AND targetinstance.name = 'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Backup\AdventureWorks.bak'
This polls every 30 secs and in the SSIS Event (ActionAtEvent in the WMI Task is set to fire the SSIS Event) I have a simple script task that runs a message box).
My understanding is that the event polls every 30 s and if there is a change on the AdventureWorks.bak file then the event is triggered and the script task will run producing the message.
However, when I run the package the message is occurring every 30s, meaning the event is continually firing even though there has been NO change to the AdventureWorks.bak file.
Am I correct in my understanding of how this should work and if so why is the event firing when it should not ?
View 2 Replies
View Related
May 31, 2007
Server 2003 SE SP1 5.2.3790 Sql Server 2000, SP 4, 8.00.2187 (latest hotfix rollup)
We fixed one issue, but it brought up another. the fix we applied stopped the ServicesActive access failure, but now we have a failure on MSSEARCH. The users this is affecting do NOT have admin rights on the machine, they are SQL developers.
We were having
Event Type: Failure Audit
Event Source: Security
Event Category: Object AccessEvent ID: 560
Date: 5/23/2007
Time: 6:27:15 AM
User: domainuser
Computer: MACHINENAME
Description:
Object Open:
Object Server: SC Manager
Object Type: SC_MANAGER OBJECT
Object Name: ServicesActive
Handle ID: -
Operation ID: {0,1623975729}
Process ID: 840
Image File Name: C:WINDOWSsystem32services.exe
Primary User Name: MACHINE$
Primary Domain: Domain
Primary Logon ID: (0x0,0x3E7)
Client User Name: User
Client Domain: Domain
Client Logon ID: (0x0,0x6097C608)
Accesses: READ_CONTROL
Connect to service controller
Enumerate services
Query service database lock state
Privileges: -
Restricted Sid Count: 0
Access Mask: 0x20015
Applied the following fix
http://support.microsoft.com/kb/907460/
Now we are getting
Event Type: Failure Audit
Event Source: Security
Event Category: Object Access
Event ID: 560
Date: 5/23/2007
Time: 10:51:23 AM
User: domainuser
Computer: MACHINE
Description:
Object Open:
Object Server: SC Manager
Object Type: SERVICE OBJECT
Object Name: MSSEARCH
Handle ID: -
Operation ID: {0,1627659603}
Process ID: 840
Image File Name: C:WINDOWSsystem32services.exe
Primary User Name: MACHINE$
Primary Domain: domain
Primary Logon ID: (0x0,0x3E7)
Client User Name: user
Client Domain: domain
Client Logon ID: (0x0,0x60D37C1A)
Accesses: READ_CONTROL
Query service configuration information
Query status of service
Enumerate dependencies of service
Query information from service
Privileges: - Restricted Sid Count: 0 Access Mask: 0x2008D
View 4 Replies
View Related
Nov 2, 2007
Hi all,
Can we get the event properties by using a query?
Are there any extended stored procuder to get the above?
Scenario:
>Desktop>Right Click on My Computer
>Go to Manage and click
>Expand System Tools
>Expand Event Viewer
>Application
click on one event.We can get the log info which is the manual procudure.
But now i want to get the event properties through the Query analyzer...
Any help would be great?
Thanks,
View 4 Replies
View Related
Apr 19, 2007
Hi,
I need a help from you all on Sending Email on some specific event from SQL SERVER 2005. Any Idea how Do I proceed?
Any help will be appreciated.....
Thanks,
Rahul Jha
View 2 Replies
View Related
Oct 5, 2006
I have a Question about this Version!
Is this true that only one Person can query the Server at the same time? ( 1CAL Lizense)
I wrote a .Net Appllication and now the Appllication need acces to the Server to Query Tables.
In the "Rush Hour" it is possible that more than 100 Person make Querys from that Application to the SQL Server at the same time.
I don´t understand the CAL Lizens because the SQLServer Express allows up to 20 connection!?
The SQLExpress is for free and allow more connections than a paid Version?
Or is a difference between connection ( through the Appllication) and Connection through the Management Studio ?
Thanks for HELP!!
Pseudocode
View 3 Replies
View Related
Sep 12, 2007
if service broker is not an option, how can the trigger and sp(s) called by our trigger act asynchronously to the event that fired the trigger in the first place. We are more concerned with the original event being committed than the actions that follow via the trigger.
View 4 Replies
View Related
Jan 25, 2007
Hello All,
I just performed a fresh install of MSSQL 2005 Server Developer Edition on my XPSP2 machine along with MSSQL 2005 SP1 and I noticed that errors are not being reported in the Windows Event Viewer. Is there a way to enable/disable logging here?
I need to view these logs because when the tasks > 'copy database' task fails it submits its error in the Windows Event Log however since I reinstalled MSSQL 2005 these log entries don't appear here.
thanks in advance.
View 7 Replies
View Related
May 1, 2007
Hello,
I have been trying to drill down to the cause for this event log message:
"The configuration of the AdminConnectionTCP protocol in the SQL instance
SQLEXPRESS is not valid."
It is reported from the SQLBrowser service as a warning when the service
starts. I have tried starting SQLBrowser.exe with -c flag, but the output reveals no
errors. I have seen this error on three computers. Two are running SQL 2000, 2005
and Express. One was only running Express, but still this message.
I then looked into the log for the SQL Express server itself. It shows this
message on startup:
"Dedicated administrator connection support was not started because it is
not available on this edition of SQL Server. This is an informational message
only. No user action is required."
Now, it appears to me that these two messages may relate to the same
"error" (or rather behaviour by design). So, can anyone confirm that the
warning in the event log from the SQL Browser service occurs becuase of that
the SQL Express edition doesn't allow any "AdminConnection", but the SQL
Browser service isn't aware of that SQL Express edition shouldn't support that, and
reports it as a warning (implying that we can't do much about this warning)?
Thanks for any input on this issue!
View 5 Replies
View Related
Oct 5, 2006
Hi
I am constantly getting this error message in the Application log after installing SQL 2005 last night followed by SP1 (say 5 times a minutes). See below:
EventType sql90exception, P1 reportingservicesservice.exe, P2 9.0.2047.0, P3 443f5953, P4 sqldumper_unknown_module.dll, P5 0.0.0.0, P6 00000000, P7 0, P8 00e8ed9d, P9 00000000, P10 NIL.
I have reservice packed SQL 2005 but made no difference - it is running on a Windows 2003 server with all the latest MS patches.
Does anyone know the solution or possible solution to this issue?
Thanks
Matt
View 4 Replies
View Related
Oct 22, 2007
We recently upgraded to SQL 2005 from SQL 2000. We have most of our issues ironed out however about every 1 minute there is a message in the Application Event log and the SQL log that states:
EVENT ID 18456 Login Failed for the users DOMAIN/ACCOUNT [CLIENT: <local machine>]
This is a state 16 message which I thought meant that the account does not have access to the default database. The account is actually the account that the SQL services run under.
Any ideas? We can't seem to figure this one out. We actually upgraded to 2005 from 2000 and had an error appear after every reboot that prevented the SQL Agent from running(This application has failed to start because GAPI32.dll was not found. Re-installing the application may fix this problem.) We did a full uninstall of SQL and reinstalled fresh and restored the databases from .bak files and that is when the EVENT ID 18546 started occuring every minute.
We don't have any SQL heavy hitters here so please be detailed with any possible solutions. That you very much for any help you can provide!
David
View 5 Replies
View Related
Aug 9, 2007
Q1: Any way to control which db loads when, and perhaps stop this error from happening? Again- when all is said and done, the report server functions, and I am able to access just fine.
Q2: What kind of recovery is being referred to? Given the message type- I assume it's nothing of concern- probably more to do with a system that doesn't run all the time.
Okay- so I get these two event messages each time I boot.
Below are two error message I see daily with each system boot- the services mentioned do "actually" function, and are running- as not 10 seconds after these messages are logged, the successfully loaded messages appear. It's almost as if report services tries to connect before the databases are up and running.
Basically the sequence (today) was:
1. 05:49:01 Failure Audit (MSSQL$SQLEXPRESS)
2. 05:49:01 Error (Report Server Windows Service (SQLEXPRESS)
3. 05:49:02 Recovery is complete. (EventID 3408 MSSQL$SQLEXPRESS)
4. 05:49:06 Starting up database 'ReportServer'
5. 05:49:09 Server Resumed execution (MSSQL$SQLEXPRESS)
I'm assuming based on the events that Report Server Service attempts to connect to the ReportServer database before it's actually started. Doesn't really explain the failure audit-
1. Failure Audit:
Event Type: Failure Audit
Event Source: MSSQL$SQLEXPRESS
Event Category: (4)
Event ID: 18456
Date: 8/9/2007
Time: 05:49:01
User: <MACHINENAME><LOCALUSER>
Computer: <MACHINENAME>
Description:
Login failed for user '<MACHINENAME><LOCALUSER>'.
[CLIENT: <local machine>]
This is almost immediately followed by this (which I consider a no-brainer, considering the above):
2. Error:
Event Type: Error
Event Source: Report Server Windows Service (SQLEXPRESS)
Event Category: Management
Event ID: 107
Date: 8/9/2007
Time: 05:49:01
User: N/A
Computer: <MACHINENAME>
Description:
Report Server Windows Service (SQLEXPRESS) cannot connect to the report server database.
View 1 Replies
View Related
Oct 9, 2001
Hello,
Following are the two events frequently observed in the system event error log
has any body come across these errors
1.The description for Event ID ( 318 ) in Source ( SQLServerAgent$XYZ ) could not be found. It contains the following insertion string(s):
2.he Open Procedure for service "MSSQLServer" in DLL "SQLCTR70.DLL" failed. Performance data for this service will not be available. Status code returned is DWORD 0.
Any soultions for the above
Nilesh
View 1 Replies
View Related
Sep 16, 2002
I get the following message in the eventlog and I can't find any information about it.
SQL 7 sp3
Can anyone help?
Event ID: 998
Source: SQLServerProfiler
Type: Error
Category: Internal Error
Executable: I:MSSQL7innsqlservr.exe
Description: Error performing inpage operation.
Source: ........srcwritelog.c
Line: 811
View 1 Replies
View Related
Nov 6, 2007
HOW TO RESOLVE IT?
View 1 Replies
View Related
Jun 28, 2007
I get this error in My Event Log on My WSUS server. I am running a Windows 2000 with SQL 2K SP4.
Connection to database failed. Reason=Cannot open database requested in login 'SUSDB'. Login fails. Login failed for user 'WSUSASPNET'.. Connection string: Data Source=WSUS;Initial Catalog=SUSDB;Connection Timeout=60;Application Name=WSUS SQL Connection; Trustedd_Connection=Yes;Pooling='true'; Max Pool Size = 100
View 1 Replies
View Related
Apr 30, 2008
I have been observing repeat error logs in the Event Viewer (Appln Logs) for event ID 107
Event Type: Error
Event Source: Report Server Windows Service (MSSQLSERVER)
Event Category: Management
Event ID: 107
Date: 4/14/2008
Time: 3:22:28 AM
User: N/A
Description: Report Server Windows Service (MSSQLSERVER) cannot connect to the report server database.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
And also found an information in the error log saying that SQL Server Service started successfully immediately after this error occurred.
Is there any known root cause which makes the service restrat often ? How much is this impacting ?
Are there any methods to resolve this ?
I would be happy to get some more information on this.
Thanks.
View 1 Replies
View Related
Oct 6, 2006
i heard somewhere that there is a time a "time event wizard" or something like that in SQL. and i like to know were can i find it. any link or answer will be really appreciated thanks.
View 5 Replies
View Related
Apr 21, 2008
hello all,
i have a nested gridview. how do i add a SELECTING event for this datasource for my inner gridview? because i need to increase the commandtimeout. thnx.
private SqlDataSource ChildDataSource(string strCustno) { string strQRY = "Select ..."; SqlDataSource dsTemp = new SqlDataSource(); dsTemp.ConnectionString = ConfigurationManager.ConnectionStrings["MyConnectionString"].ConnectionString ; dsTemp.SelectCommand = strQRY; return dsTemp; }
View 1 Replies
View Related
May 30, 2008
i need some clarification here,i changed the CommandField for 'Delete" to the template field like this and its working well with the extender .<asp:TemplateField>
<ItemTemplate><asp:LinkButton ID="lnkDelete" runat=server Text="Delete" OnCommand=onCommand_deleter CommandArgument="Deleting" CommandName="Delete" ></asp:LinkButton>
<ajax:ConfirmButtonExtender ID="cnfDelete" TargetControlID="lnkDelete" runat=server ConfirmText="Are you sure you want to delete this ?" ></ajax:ConfirmButtonExtender>
</ItemTemplate>
</asp:TemplateField>
I am confused b/c
Earlier,i was handling the delete of a gridview row under OnRowDeleting event.Now its being handled by "onCommand_deletePlayer".Then why do I still need to handle onRowDeleting event?It gave me error,when i tried to avoid it.What exactly i shud code in OnRowDeleting. I am checking something like this rightnow in onRowDeleting,but this doesn't cancel the deletion despite of raising the messageif (gridView.Rows.Count <= 1)
{e.Cancel = true; lblMessage.Text = "You must keep at least one record // e.cancel doe NOT work,rows gets deleted despite the message,if delete link is clicked..}
Is there a way to stop the user from deleting the LAST and ONLY row from db for a given condition?thanks
View 5 Replies
View Related
Feb 1, 2002
I tried to save an event viewer file as a .txt format file and when I open the saved file, it's not readable.
Can someone have an idea of what format should I save the event viewer file so I will be able to view it's contents?
Thanks in advance!!
View 2 Replies
View Related
May 2, 2000
We are trying to schedule a DTS package. If we run the package when the server is logged in the job works. If we logoff the server the job fails.
We looked in the NT Event log and we get a message from the SQLServerAgent that the job failed with Event 208. If we check the job Run History in the Next Run we get message 'Date and Time is not Available'. I should mention that the DTS pachage contains some mapping to drives on the server.
Any ideas? We have been struggling with this for a long time. Thanks.
View 3 Replies
View Related
