I am trying to crate a replication on my cluster database. I create the replication for one table and it works fine but when i try to create the replication for another table and try to run the status of the snapshot agent i receive and error saying
TCP Provider: An existing connection was forcibly closed by the remote host
I try to run it again but then i receive the following errir
Failed to read prelogin response.
Can somebody tell me why is this happenning and how can i fixed
We have 4 client machine and 1 server machine, that server have all the sql server 2005 database€™s.
A project developed from client1 with Asp.net 2005 now I need to access that project from client2 so I type http://My Ip address/Folder Name/home.aspx in my browser here when the sql connection is open(SqlConnection.Opn()) then I meet this problem
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
I have a question and bear with me because I am pretty new to this topic.
I have a SQL SERVER 2005 with a Client Server Application. Now I want to add a Webinterface. Sinice there is no infrastructure for hosting our own server. I want to go to an external hoster/provider.
Now my question is it possiple to replicate a snap-shot of the database to an web hoster?
If yes, what does my hosting package requieres beside SQL SERVER and ASP.NET. Any Services and open ports? What about Security?
When I replicate via push Service from my local SQL SERVER do I have to have a tunnel to the provider? Or external network access to my network via VPN. Or is there a way of doing it via HTTP? HTTPS? (I think I saw some settings about FTP replication...). Because of the Infrastructure Problems mentioned above...
It would be great if someone could give me closer information about this topic...
Links, Ressources, Tipps, Tricks, Tools... just anything... would be appriciated very much...
Hi,I have SQL Server Express Edition. I tried working out some ASP.NET Labs in my local system. Here is the link of the Virtual Lab which I tried. http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=1032286906&EventCategory=3&culture=en-US&CountryCode=USI recieve this error in my local system. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)I tried working out solutions from various websites. But the no solution is effective. Could anyone help me in solving this issue.
Basically the error that I am getting is in our test automation when running as non-admin on the box (regular user). We use .Net C# SQLConnection class to connect to SQL express 2005 impersonating with admin credentials. After getting the connection we try to execute a select command and it some time fails with following error: A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The handle is invalid.) at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error) at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParserStateObject.ReadPacket(Int32 bytesExpected) at System.Data.SqlClient.TdsParserStateObject.ReadBuffer() at System.Data.SqlClient.TdsParserStateObject.ReadByte() at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlDataReader.ConsumeMetaData() at System.Data.SqlClient.SqlDataReader.get_MetaData() at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader()
This happen only in the non-admin scenario mentioned above. Any idea what is triggering this?
I have merge replication configured over VPN and the replication is failing to connect to the subscriber through Named pipes with the error Named Pipes Provider, error: 40 - Could not open a connection to SQL Server ......
Actually , I am having issues with Named pipes connection from publisher to subcriber. I have enabled the protocols and also enabled the remote connections using both tcp/ip and named pipes. I have created the client network alias using named pipes
Also, due to security reasons only few ports have been released on the subscriber. Please provide me some information on the following. 1) Does any port specifically be released for listening on named pipes? i am able to connect using tcpip with out any issues as 1433 has been released. 2) How to configure the replciation to use tcpip and not named pipes (guess by default it will use named pipes)?
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
i'm going nuts with SQL server notification thing. I have gone throigh this artical which tells how to set user http://www.codeproject.com/KB/database/SqlDependencyPermissions.aspx. This article show how to create new user and setup for sql server notification.But In my case user was alredy existing in database. which is very common senario in most cases. So i did following( check the SQL script below) but then i get this error "A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)" this my sql script use [master]Go -- Ensuring that Service Broker is enabled ALTER DATABASE [DatabaseName] SET ENABLE_BROKERGO -- Switching to our databaseuse [DatabaseName]GO CREATE SCHEMA schemaname AUTHORIZATION usernameGO ALTER USER username WITH DEFAULT_SCHEMA = schemaname GO /* * Creating two new roles. We're not going to set the necessary permissions * on the user-accounts, but we're going to set them on these two new roles. * At the end of this script, we're simply going to make our two users * members of these roles. */EXEC sp_addrole 'sql_dependency_subscriber' EXEC sp_addrole 'sql_dependency_starter' -- Permissions needed for [sql_dependency_starter]GRANT CREATE PROCEDURE to [sql_dependency_starter] GRANT CREATE QUEUE to [sql_dependency_starter]GRANT CREATE SERVICE to [sql_dependency_starter]GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_starter] GRANT VIEW DEFINITION TO [sql_dependency_starter] -- Permissions needed for [sql_dependency_subscriber] GRANT SELECT to [sql_dependency_subscriber] GRANT SUBSCRIBE QUERY NOTIFICATIONS TO [sql_dependency_subscriber] GRANT RECEIVE ON QueryNotificationErrorsQueue TO [sql_dependency_subscriber] GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_subscriber] -- Making sure that my users are member of the correct role.EXEC sp_addrolemember 'sql_dependency_starter', 'username'EXEC sp_addrolemember 'sql_dependency_subscriber', 'username'
Facts:1. I am using my account on Godaddy trying to connect to my sql server db.2. I can get into my db using user id and password.3. Godaddy's help file shows this for a connection string: connectstr = "Driver={SQL Server};SERVER=" & db_server & ";DATABASE=" &db_name & ";UID=" & db_username & ";PWD=" & db_userpassword4. My connection string: "Server=whsql-v09.prod.mesa1.secureserver.net;uid=dbasolutions;pwd=***;database=DB_87972;" & _ "Trusted_Connection=False providerName=System.Data.SqlClient"{password **** out}5. Get error message An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) I tried to email Godaddy's help desk with this information. There first response: We do not allow remote connections to our sql server database.There second response was to read the help file!Does anybody have any suggestions? Thanks in advance,bswanson
We experience the 40 error when our Asp.net code runs under IIS and uses named pipes to a sql server 2005 named instance.
We've tried all suggestions found on blogs and KB articles such as making sure the named pipes protocol is enabled, making sure the Browser service is started, making sure Allow Remote Connections is enabled, making sure we're not using Asp.Net 2.0 membership providers, and the list goes on and on.
We boiled it down to a simple test scenario. We open a SqlConnection to the sql 2005 box in the code with the intention of binding a datareader to a gridview, but it never gets that far because the connection.Open() fails.
If we run this test application as a virtual directory in IIS and Asp.Net 2.0, the connection.Open() fails.
If we run this test application from Visual Studio .Net using Cassini (PWS), the connection.Open() succeeds and binds to the gridview.
What could be causing the connection to fail under IIS but succeed under Cassini? We've tried setting IIS to run as a domain user and with digest authentication enabled. That made no difference.
I'm getting this, after upgrading from 2000 to 2005.Replication-Replication Distribution Subsystem: agent (null) failed.The subscription to publication '(null)' has expired or does notexist.The only suggestions I've seen are to dump all subscriptions. Sincewe have several dozen publications to several servers, is there adecent way to script it all out, if that's the only suggestion?Thanks in advance.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. I am getting this error and using this connection string Data Source=192.168.0.100;Network Library=DBMSSOCN;Initial Catalog=ENet;User ID=eonline;Password=eonline; What can be solution for this.
Hi, I am working on VS 2005 and using SQL 2005 Express and i am processing excel files and inserting records in data base as i processing starts and almost after processing 600 i got this error provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server. how can i solve that thanx
Hi, My .NET 2005 application is on a server outsite company's domain. SQL server is in domain and port for sql server is open. TCP/IP is set for remote connection in SQL Server. Connection string in .config is <add name="X_Conn" connectionString="Data Source=XXX;Initial Catalog=XXX;User ID=XX; Password=XXX;" providerName="System.Data.SqlClient"/> I receive the error below: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) thanks a lot in advance!
We just changed the dev environment to sqlagent. From then we were unable to see the reports on the report server because:
An error has occurred during report processing.
Cannot create a connection to data source 'IHRSDataSource'.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
this error is cropping up.
To Resolve this issue, we checked the Surface Area Configuration and also checked the Reporting Service Configuration . There seem to be no problem and everything looks ok.
We have 4 client machine and 1 server machine, that server have all the sql server 2005 database€™s.
A project developed from client1 with Asp.net 2005 now I need to access that project from client2 so I type http://My Ip address/Folder Name/home.aspx in my browser here when the sql connection is open(SqlConnection.Opn()) then I meet this problem
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
I am new to dotnet. I tried connecting to the database MS SQL Server 2000. I gave the code like, the one below, in form load event,
SqlDataReader dr = null;
SqlConnection myConnection = new SqlConnection("Data Source=IP;Initial Catalog=name;User Id=uid;Password=pwd;");
myConnection.Open();
myConnection.Close();
But I could not connect. The error message highlights the line myConnection.Open() and displays the error
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
It tries connecting to SQL Server 2005. There is no SQL Server 2005 in that system. There is only SQL Server 2000.
I have the aspx code in my local system and the database in another machine.
Could Someone please help me out in solving this problem.
I realised this has been done to death, and so much information out there but I am still in a quandry.
I have had to rebuild my computer.
This is what I did
XP machine using SQL Server 2005 Standard Edition using Windows Authentication NZ6(MSSQLSERVER)
straight default install all the way
unfortunately when ready to run reports from my instance(computer) I received the error as in provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server
thought I had it all okayed but obviously something not right
so ended up unistalling then - did the following:
Load SQL Server from disc1 and start install failed on alter Counter Registry key error fixed this from KB article (known error that can happen) restarted Went to Windows Update check IIS is installed - tick is on - IIS - admin tools - make sure asp2 is associated - yes ok Then back to install sql server - there is no instance set up yet Disk 2 and setup .exe
All ok on Reporting Services, Analysis etc.
But once again all seems fine but still getting the error:
connection is all fine in Management Studio - eg I can see tables etc connection is all fine in Business Intelligence - eg I can preview my reports I then can deploy up to - NZ6 open NZ6 eports report is there fine - but just errors
some simple little tick that I have not done!!
I seem to have checked and rechecked everything and obviously doing another re-install does not seem a logical step from here. I will continue to check but if someone jump in and advise please would be great.
I am creating a web site using Visual Studio 2008 & trying to connect to database on SQL Server 2000. My test connection is successful but while debugging the page I am getting this error : " provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server "
Solutions recommended for this were start running the SQL browser instance and enable Namespipes in Sqlserver configuration manager.Did both.. but nothing worked.
I made a Web page, and it works perfect on my local machine, everything is OK, until I uloaded page to the server, it reports this error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735091 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) +820 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +359 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121 System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +137 System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +83 System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1770 System.Web.UI.WebControls.Repeater.GetData() +50 System.Web.UI.WebControls.Repeater.CreateControlHierarchy(Boolean useDataSource) +232 System.Web.UI.WebControls.Repeater.OnDataBinding(EventArgs e) +53 System.Web.UI.WebControls.Repeater.DataBind() +72 System.Web.UI.WebControls.Repeater.EnsureDataBound() +55 System.Web.UI.WebControls.Repeater.OnPreRender(EventArgs e) +12 System.Web.UI.Control.PreRenderRecursiveInternal() +77 System.Web.UI.Control.PreRenderRecursiveInternal() +161 System.Web.UI.Control.PreRenderRecursiveInternal() +161 System.Web.UI.Control.PreRenderRecursiveInternal() +161 System.Web.UI.Control.PreRenderRecursiveInternal() +161 System.Web.UI.Control.PreRenderRecursiveInternal() +161 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1360
I've just posted mywebsite andthis error keep being trhrown as soon as I access the DB I dont understand what is going on and if I dont get it working bu today will delivery date will expire and I will get in trouble... So anyone knows what is going on It says the following: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) Here is my con string : <add name="ASPNETDBConnectionString" connectionString="Data Source=p3swhsql-v09.shr.secureserver.net;Initial Catalog=myCatalog;User ID=MyID;Password='Mypassword"/> Thanks a lot
I am getting the following error when i try to connect to the my web site using froma different server. A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) i am using sql express and i attach the database through the connection string in the web config. Any ideas
I am very frustrated. Everything works on the local host but when I upload to server I can login to the admin role I created, but when I try to access pages that have role priveleges I get the following error: The SSE Provider did not find the database file specified in the connection string. At the configured trust level (below High trust level), the SSE provider can not automatically create the database file. The ASPNETDB.MDF database was uploaded using the Database Publishing Wizard. Please help!
Hi guys, I recently developed a website for one of my client and today client report that i face random error sometime when i access some pages.The complete error description are shown below.A transport-level error has occured when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name is no longer available. Can any one told me from which reason this error generated and how to resolve it, Client host website on shared hosting plan and uses SQL SERVER 2005 as database management system.Thanks.
I try to connect to a SQL Server 2005 Express Edition via IP address. But anytime the application tries to connect to the database here is th error message I receive:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.)
I have enabled the TCP/IP under SQL Server, Under SQL Server Configuration Area, I have chosen the option Local and remote connection: TCP/IP only I have verified that my firewall allows SQL remote and a Local Connection.
Now I don't know where to look or what I have to fix to continue. I will really appreciate if somebody can help me.
I'm Getting "Report Server WMI Provider error: Not Found" when trying to Grant Database Access while configuring the Reporting Sevices Integration. Logging in fine to the DB. Tried all the WMI troublshooting and can't find any issues there. Any tips?
Does anyone else have this error message pop up in SSMS when you try to parse sql statements:
.Net SqlClient Data Provider: Msg 0, Level 11, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.
There was a thread back in March 2006 that mentioned this error, but the posted resolution was to install SP1. I have SP1 installed but I still get the error.
I only receive the error when I'm parsing statements, if I run the statement it's fine.
Hi I always get good reply from u all, thank you, I have copied my asp.net website from one server to another. they administrator made necessary modification on IIS manager . and able to see the website on browser. but now i can't loging to system using old password. I tryed to create new password then also it gives error System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) Here I have used asp.net login control and membership class. Do I need to make nay changes in code. I have already modified server name in connection string in web config file. any one can say what is the problem and how to solve this. thanks Pat
Hi , I am struck with one issue.Plz help me out if you have any solution for this one. Details Front End - Visual Studio 2005 Back End -SQL Server 2000 (Remote database) Error i am getting is {System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at dbcAccess.clsSQL.GetConnect() in C:Documents and SettingskerlsgMy DocumentsVisual Studio 2005ProjectsdbcAccessdbcAccessclsSQL.cs:line 296}
{System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
