Hi,
I have created a report in SQL reporting using serveral parameters including a date parameters called
StartDate EndDate
Now my requirement is, in ReportViewer I need to validate in such a way where
"StartDate" should not be greater than "EndDate".
So kindly help me out by giving me possible solution for the above issue.
thanks in advance,
Ramesh KS
I want to know how to make StartDate and EndDate should be greater than current date....
View 4 Replies View RelatedI need query which will check user supplied date range is in between the existing table startdate and enddate.
if any of the date of user supplied date range is in between the tables start date and end date,it should retrun that record from table.
for example user supply date range is from 1 may 2012 to 5 may 2012.
then query must check that
1 may 2005
2 may 2005
3 may 2005
4 may 2005
5 may 2005
(all dates) is in between startdate and enddate of existing table.
Hi,
If i pass a date(03/01/2008) i need to get the startdate(31/12/2007) and enddate(05/01/2007) of the week. Is there any functionallity in SSRS 2005 to do this.
Thanks
Dinesh
Say I have a table which has the validity of an offer as two seperate field, being startDate and endDate:
Code:
ID startDate endDate
1 2005-09-01 2005-10-01
2 2005-06-20 2005-10-20
3 2005-07-18 2005-08-16
Now say I want to filter on this data by startDate and endDate, however I have to return any offer that is valid for a specific period.
E.g. if I filter by startDate = 2005-09-10 and endDate = 2005-10-01 then I want it to return the offers with the ID of 1 and 2 as both of these are valid for the dates I'm filtering on.
I can't for the life of me figure out how to do this at the moment, maybe it's too early in the morning to be thinking about this.
Any help is greatly appreciated.
-D
Here is sample data I am working with:
Create table cattimelines (categoryID int, EffectiveDate datetime, CategoryValue varchar(11))
INSERT INTO cattimelines(categoryID, EffectiveDate, CategoryValue) VALUES(1000, '2014-01-01', 'A')
INSERT INTO cattimelines(categoryID, EffectiveDate, CategoryValue) VALUES(1000, '2014-02-01', 'B')
INSERT INTO cattimelines(categoryID, EffectiveDate, CategoryValue) VALUES(1000, '2014-04-01', 'C')
INSERT INTO cattimelines(categoryID, EffectiveDate, CategoryValue) VALUES(1000, '2014-07-01', 'A')
I need to calculates a term date for each record which will be 1 day before the effective date of any new record, thus:
CATEGORYIDEFFECTIVEDATETERMDATECATEGORYVALUE
10002014-01-012014-01-31A
10002014-02-012014-03-21B
10002014-04-012014-06-30C
10002014-07-01NULLA
I have one table,
Table1:
EventId EventName EventStartDate EventEndDate RepeatCount StartTimeEndTime
1Event1 2014-11-04 00:00:00.0002014-11-25 00:00:00.000 4 4:30 PM6:30 PM
2Event2 2014-11-05 00:00:00.0002014-11-12 00:00:00.000 2 3.00 AM4.00 AM
3Event3 2014-11-01 00:00:00.0002014-11-15 00:00:00.000 3 1.00 PM 2.00 PM
4Event4 2014-10-30 00:00:00.0002014-11-06 00:00:00.000 2 5.30 PM 6.30 PM
5Event5 2014-10-16 00:00:00.0002014-11-16 00:00:00.000 0 5.30 PM 6.30 PM
I want to display 2 weeks Events from Table 1 depends on repeat count
(if event scheduled on Tuesday(2014-11-04) and repeat count is 4 then it should repeat the 2 row of data)
We have to display only upcomming events, if the repeat count is 0 and the startdate and enddate falls by todays date then it should display as a single row.Data's Should be ordered by recent date
Expected Result
S.NoEventIdEventName EventDateTime
11Event1 2014-11-04 00:00:00.000
22Event2 2014-11-05 00:00:00.000
34Event4 2014-11-06 00:00:00.000
43Event3 2014-11-08 00:00:00.000
51Event1 2014-11-11 00:00:00.000
62Event2 2014-11-12 00:00:00.000
73Event3 2014-11-15 00:00:00.000
85Event5 2014-11-16 00:00:00.000
Assume today's date 2014-11-04 00:00:00.000 and time now 3.40 PM
For some of my calculations it is mandatory to get the first and the last date, filtered by the slicer type "timeline".
This works well as long as the date is not used on rows or columns ...
As soon as I'm using theDate within the rows this very simplistic dax measure doesn't work ...
I'm wondering how to determine the StartDate (from the timeline) and the EndDate (from the timeline) when "thedate" is actively contributing to the filtercontext.
In my opinion it is not another example of the "event in progress" situation, due to the fact that start and end dates are actively selected by the user and can not be derived from within the date model.
[URL]
i have problem generating the SSRS Reports.Â
i have Report URL Â with 2 parameters-- @StartDate and @EndDate
when i hard coded the values and copy the URL in IE, Report gets generated
sample URL's:
[URL]
but when i use Parameters--Report is not getting generated.
[URL]
Below is the error;

Reporting Services Error
The value provided for the report parameter 'StartDate' is not valid for its type. (rsReportParameterTypeMismatch)
SQL Server Reporting Services
Please i need an exmple of ur solution, thanks :)
I'm using some files to show certain pages on certain date for an example
File name : aa.doc
start date: 10/02/00
end date : 10/03/00
But it expires on 10/02/00, here is the strored procedure:
Before the date comes, it expires the page
Here is my stored procedure:
"
SELECT startdate, enddate,archivedate
and (startdate is null or (getdate() >= startdate and getdate() <= enddate))
and (archivedate is null or (getdate() <= archivedate))
group by startdate, enddate order by startdate desc "
Thankx a lot
Hello,
My problem is with Validating Date parameter filed, when I user enters wrong (assume user is entering date instead of selecting from date picker). Where following are scenarios I would like to validate.When user enters non-date.
When user enters 30/feb/yyyy.When user enters 29/feb/yyyy. (for non-leap year).When user enters 31/mm/yyyy. (for months does not includes day 31)
Could you explain in a little more detail how to accomplish this?
thanks in advance,
Ramesh KS
I have a column of varchar(2000) but when I use it in a select statement I only get the first 255 characters displayed. (all the data is there as I can see different parts using substring) How do I get the complete column to display?
View 2 Replies View RelatedHi Guys
I have a table with id, date column in it. How do i list all records which has date greater than 30 day?
Thanks
Is this Correct?
SELECT * FROM TABLE WHERE DATEDIFF(DAY, DATE, GETDATE()) > 30
Hello,
I have a Problem .
My Users from the Reportingservices cannot change in the Abonnements Propertis the Field " TO" Email Address.
I have set the following Security Permissions.:
- View Reports
- Manage Individual subscriptions
- View Ressources
- View folders
- Consume Reports
When i set the "Manage ALL Subscriptions" ,the Users can Change the "TO" Email Address.
Can anyone give me a Tip does Users set the "TO" Field without the Permission "Manage ALL Subscriptions".
I won't give my Users the Permission to Manage ALL Subscriptions.
Many Thanks
I'm trying to import a text file with a column that is actually a date value, like this "19550218" (yyyymmdd).
What is the best way to test if the string-date values in this column represent valid sql dates? Should I use SSIS to copy that value into an actual sql date field and see if an error is generated? I have tried using the VB.NET
"System.Datetime.ParseExact"
function in a Script task but found ParseExact less than reliable.
TIA,
Barkingdog
P.S. In fact, thought not speedy, I think that SSIS should come with a number of datatype validation routines "out of the box". Importing clean data is relatvely easy. It's handling the exceptional cases, like above, that really burn up my time.
P.P.S An before some says "regular expressions" I don't know enough about them to use them wisely.
How can I validate the date that is coming across in a 8 byte character field via an expression? It will either be a valid date or 0. If it is zero I want to make it a null.
View 1 Replies View RelatedI want SQL to look at a date field and sort the data by todays date and greater. Even though there may be some data older than today. I've tried something like this but not working
order by SSD_SED >= GETDATE()
Where the date field is SSD_SED.
I Apologize if this isn't the forum to ask this...
I have a MS Access (MDB) file with a table with 2 date fields, i want to read from a dialog on my app (on MS Visual .NET Studio 2005), here's the code I've been using do far:
Code Snippet
hr=theApp.m_cs.Open(theApp.m_ds);
if(SUCCEEDED(hr)) {
theApp.m_cs.StartTransaction();
theApp.m_cs.Commit();
CCommand< CDynamicAccessor > cmd;
CComBSTR query(_T("SELECT NumContrato, NumClie, FechaC, FechaCob, Inversion, NoCobrador, NoVendedor, Total, Plazo, Pagos FROM Contrato"));
CString string(query.m_str);
cmd.Open(theApp.m_cs,string);
hr = cmd.MoveFirst();
query=static_cast< BSTR >(cmd.GetValue(1));
CString csres(query.m_str);
this->m_numc=(int)*(query.m_str);
query=static_cast< BSTR >(cmd.GetValue(2));
m_numcte=(int)*(query.m_str);
query=static_cast< BSTR >(cmd.GetValue(3));
//m_fecc=(int)*(query.m_str);
MessageBox(csres);
theApp.m_cs.Close();
}
FechaC, FechaCob, are the two Dates I want to retrieve, but when I debug, it reads a 0 (zero) from the date fields, is there a limitation? can they be read? is there a special way to read them?
> thanks in advance!
-----
Me!
Hello !I'm trying to update one table field with another table searched firstdate record.getting some problem.If anyone have experience similar thing or have any idea about it,please guide.Sample case is given below.Thanks in adv.T.S.Negi--Sample caseDROP TABLE TEST1DROP TABLE TEST2CREATE TABLE TEST1(CUST_CD VARCHAR(10),BOOKING_DATE DATETIME,BOOKPHONE_NO VARCHAR(10))CREATE TABLE TEST2(CUST_CD VARCHAR(10),ENTRY_DATE DATETIME,FIRSTPHONE_NO VARCHAR(10))DELETE FROM TEST1INSERT INTO TEST1 VALUES('C1',GETDATE()+5,'11111111')INSERT INTO TEST1 VALUES('C1',GETDATE()+10,'22222222')INSERT INTO TEST1 VALUES('C1',GETDATE()+15,'44444444')INSERT INTO TEST1 VALUES('C1',GETDATE()+16,'33333333')DELETE FROM TEST2INSERT INTO TEST2 VALUES('C1',GETDATE(),'')INSERT INTO TEST2 VALUES('C1',GETDATE()+2,'')INSERT INTO TEST2 VALUES('C1',GETDATE()+11,'')INSERT INTO TEST2 VALUES('C1',GETDATE()+12,'')--SELECT * FROM TEST1--SELECT * FROM TEST2/*Sample dataTEST1CUST_CD BOOKING_DATE BOOKPHONE_NOC12005-04-08 21:46:47.78011111111C12005-04-13 21:46:47.78022222222C12005-04-18 21:46:47.78044444444C12005-04-19 21:46:47.78033333333TEST2CUST_CD ENTRY_DATE FIRSTPHONE_NOC12005-04-03 21:46:47.800C12005-04-05 21:46:47.800C12005-04-14 21:46:47.800C12005-04-15 21:46:47.800DESIRED RESULTCUST_CD ENTRY_DATE FIRSTPHONE_NOC12005-04-03 21:46:47.80011111111C12005-04-05 21:46:47.80011111111C12005-04-14 21:46:47.80044444444C12005-04-15 21:46:47.80044444444*/
View 3 Replies View RelatedHello,
I am trying to validate a user via a stored procedure. This works OK until I try to validate the password, at which point the validation fails (even though the password is OK). Below is my sproc. If I comment out AND m.Password = @Password the sproc is OK. I am passing in the password as a string when testing the sproc. Any ideas? J.
ALTER Proc [dbo].[pru_VerifyApproveUser]
@UserName nvarchar(256),@Password nvarchar(128),@ApplicationName nvarchar(256)AS
BEGIN
IF EXISTS(Select * from dbo.aspnet_Membership WHERE Email = @UserName)BEGIN DECLARE @UserId uniqueidentifierSELECT @UserId = NULLSELECT @UserId = u.UserId
FROM dbo.aspnet_Membership m, dbo.aspnet_Users u, dbo.aspnet_Applications aWHERE LoweredUserName = LOWER(@UserName) ANDu.ApplicationId = a.ApplicationId AND LOWER(@ApplicationName) = a.LoweredApplicationName ANDu.UserId = m.UserId AND m.Password = @Password
-- If @Userid is Null - then the above credentials are not satisfied-- e.g. wrong password/username combo..
IF (@UserId IS NULL)
BEGIN
RETURN 2
END
Update dbo.aspnet_Membership
SET IsApproved = 1
WHERE Email = @UserName
RETURN 1
END
END
All:
I am attempting to install SQL Server 2005 Enterprise Edition. The install stalls permanently, the SQL Server's memeory usage and CPU usage plummets to nothing and the SQL Server 2005 Setup Dialogue's status stops at "Validating Database Password." This occurs on the SQL Server Database Services portion of the install. The last line in the SQL Server Setup.log says "<Func Name = 'SAPaswwordPolicyCheck'>
I have verified that the sa password that I am entering when prompted for it in the install setup is valid with respect to SQL Server and Windows Server 2003 SP 1 (13 chars, at least one symbol, at least one upper and at least one lower). What else could be causing this problem? Any ideas or stabs would be greatly appreciated.
Thanks,
NubbyDBA
I've 2 date fields clidlp,clidlc in my data base table. How do I find the newest dates between the fields? Thanks for your help!
View 1 Replies View RelatedHi,
I did something bad (I don't recall what it was) and I can no longer log into Reporting Services. I wish I could list everything I've tried but I've been at it so long I don't remember. And I've been through the ringer of error messages.
Is there a way I can completely reset and/or restart all the settings from the original install - without doing a new install? I am afraid I am going to mess up SSAS, SSMS, SSIS and something else.
Thank you for the help.
-Gumbatman
Hi I’m getting an error that says “Must declare the scalar variable "@StartDate".� for the following line of code :
dt = ((DataView)(EventDataSource1.Select(dssa))).ToTable()
Can anyone help me out? Here is my entire code.
Dim EventDataSource1 As New SqlDataSource()EventDataSource1.ConnectionString =
ConfigurationManager.ConnectionStrings("ASPNETDBConnectionString").ToStringDim dssa As New DataSourceSelectArguments()Dim EventID As String = ""Dim DataView = ""Dim dt As New Data.DataTableDim conn As New Data.SqlClient.SqlConnection(ConfigurationManager.ConnectionStrings("ASPNETDBConnectionString").ToString())Dim cmd As New Data.SqlClient.SqlCommand("SELECT EventID FROM Event WHERE ([StartDate] = @StartDate)", conn)EventDataSource1.SelectCommand = ("SELECT EventID FROM Event WHERE ([StartDate] = @StartDate)")conn.Open()dt = ((DataView)(EventDataSource1.Select(dssa))).ToTable()EventID = dt.Rows(0)(0).ToString()EventDataSource1.SelectParameters.Add("@StartDate",StartDate)EventID = cmd.ExecuteScalar()tbEventIDTest.Text = EventID
Hello.
I need an SQL Statement for SQL Server in VB.Net that will return values from a table for parts that are due for maintenance within 1 month.
Select * from Part Where DateNOverhaul <= '" & DateAdd(mm,-1,Date) & "' is not working.
I have been trying various solutions on the web and am getting confused because none seem to work. Please help me.
Thank you.
Hello !How to save on SQL server a date in this format?dd-mmm-yyyyAlso, I have a web form in ASP.net and I want the users to enter datesonly in the above format. I am going to need to make calculationsbeased on the above.Many Thanks,Marios Koumides
View 2 Replies View Related
Im creating a table that links employees to jobs, each employee can only be in one place at once. I have fields for start date and end date. Whats the best way of ensuring an employee cannot be assigned to more than one job at the same time.
Im thinking update/insert trigger that ensure Start Date or End Date being added is NOT >/=existing Start Date and </=existing End Date.
Anyone any better ideas?
Thanks in advance
Alex
hi all.
in my server i have a reportingservice report.
how can i print it from c# code?
Hello all,
After reinstalling several times the MSSQL 2005 express, and the SP1 when I'm trying to create a project with the BIDS I've got an error:
Could not load file or assembly
Microsoft.ReportingServices.Designer
Version=9.0.242.0
..
or one of its dependencies. System cannot find the file.
But it exists!!!What can I do?
Many thx!
I am trying to order two date columns. One Ascending theother Descending. I am using the Orders table of Northwind in SQLServer. No idea why, but it only sorts on the first column I setcriteria on. I think you have to convert it to date as it gets storedas date/time...I triedSELECT TOP 100 PERCENT OrderID, CustomerID, EmployeeID, OrderDate,CONVERT(char(10), RequiredDate, 103) AS RequiredDate,CONVERT(char(10), ShippedDate, 103) AS ShippedDate, ShipVia,Freight, ShipName, ShipAddress, ShipCity, ShipRegionFROM dbo.OrdersORDER BY RequiredDate, ShippedDate DESCBut odd results occuredAny ideas appreciated
View 3 Replies View Relatedi have two columns in sql which is datetime datatype
fromdate & todate, now i want to display it like fromdate-todate in my front end
select fromdate +'-'+ todate as date from table.
when i use this query , the error is
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
Thanks for any help
hi,
When the autogenerate property of datagrid is set to true, how to perform sorting on date fields.
Example:
SELECT DC_NO AS [Document No],CONVERT(CHAR(10),DC_DT,103) AS [Document Date],
[Name] FROM XYZ
Here we convert the date field to the format "dd/mm/yyyy" so when sorting is done it is done in the format "dd/mm/yyyy". But instead sorting should be done in "yyyy/mm/dd" format.
Hi,
I have the following table:
CREATE TABLE [Orders] (
[OrdID] [int] ,
[OrderDate] [datetime] ,
[OrderDateONLY] [datetime],
[OrderDayName] [nvarchar] (15),
[OrderMonth] [nvarchar] (25),
[OrderDayOfMonth] [smallint] NULL ,
[OrderWeekofYear] [smallint] NULL
)
GO
The field OrderDate contains BOTH Date and Time information. What I want to do is populate the fields (in bold above) from the OrderDate field... I have tried all that I could think of but nothing works. The last and the best try that I gave was the {B}following[/B] but that too does not work. Can you PLEASE help. Many thanks in advance:
Insert ORDERS
(OrderDateONLY, OrderDayName, OrderMonth, OrderDayOfMonth, OrderWeekofYear)
select
d, datename (dw, d), datename (mm, d), Year (d), datepart (ww, d)
from
(select convert (char (8), OrderDate, 112)as d
from ORDERS
) as x