SQL 2005 Job Is Failing

Dec 5, 2007

SQL Server 2005 version: 2153
I created a maintplan for system and user databases includes rebuild index, maint cleanup tasks.

Job is failing for user databases
It includes rebuild index task( online index enabled) and maintenance cleanup task, scheduled at every sunday 1 AM.


I receive following errors:

In eventvwr log

sql server scheduled job 'DBMP_RebuildIndex_User'
status: failed-Invoked on 2007-12-02 -1:00 Message: The job failed. The job was invoked by schedule 8 ('DBMP_RebuildIndex_User-Schedule).The last step to run was step1 ('DBMP_RebuildIndex_User')[/red]

In log report:

Failed-1073548784) Excuting the query "ALTER INDEX [XPKact_log] ON
[dbo].[act log] REBUILD WITH (PAD_INDEX=OFF,
STATISTICS_NORECOMPUTE=OFF,ALLOW_ROW_LOCKS=ON,ALLOW_PAGE_LOCKS=ON,SORT_IN_TEMPDB=OFF,ONLINE=ON)
"failed with the following error "Online index operation cannot be performed for index 'XPKact_log' because the index contains column 'action_desc' of data type text, ntext.image.varchar(max),varbinary(max) or xml. For non clusterd index the column could be an include column of the index. for clusterd index it could be any column of the table .Incase of drop_existing the cloumn could be part of new or old index. The operation must be performed offline". Possible failure reasons : Problems with the querey .'" Resultset" property not set correctly, parameters not set correctly, or connection not established correctly.

Please anyone help me on this?
I really appriciate

Thnks

View 1 Replies


ADVERTISEMENT

Sql 2005-ReorganizeIndex Job Is Failing

Dec 26, 2007

Reorganize Index job is failing for user databases

Log Report says:
Failed (-1073548784) Executing the query 'ALTER INDEX [ams_1v11_alerts_groupcount] ON [dbo].[ams_1v11_alerts] REORGANIZE WITH (LOB_COMPACTION=ON)

"failed with the following error:"The index"ams_1v11_alerts_groupcount" (partition 1) on table "ams_1v11_alerts" cannot be reorganized because page level locking is disabled.".possible failure reasons:Problems with the query ,"ResultSet" property not set correctly, parameters not set correctly, or connection not estabilished correctly.

I have already running REBUILD INDEX job every suday 1 AM.

Please advice is it necessary to run both REORGANIZE INDEX and REBUILD INDEX ???

View 3 Replies View Related

SQL 2005 Backup Failing [UNRESOLVED]

Feb 7, 2007

Environment: SQL 2005 Workgroup Ed. (part of SBS 2003 R2 Premium)

I have a database attached to SQL 2005 that is on my D: drive. I'm trying to run a full backup of this database to a backup device also on D:. The first time I ran the backup it worked fine, then I installed SQL 2005 SP1 and now it's failing. The error message is:

quote:
Backup failed for Server 'MYSERVER'. (Microsoft.SqlServer.Smo)
System.Data.SqlClient.SqlError: Write on "My Backup Device(D:BackupMyBackupDevice.bak)" failed: 112(There is not enough space on the disk.)(Microsoft.SqlServer.Smo)


In the event viewer, the following events are logged in the Application log:

quote:
Source: MSSQLSERVER
Category: (6)
Event ID: 3041
Description:
BACKUP failed to complete the command BACKUP DATABASE MyDatabase. Check the backup application log for detailed messages.

quote:
Source: MSSQLSERVER
Category: (2)
Event ID: 18210
Description:
BackupMedium::ReportIoError: write failure on backup device 'D:BackupMyBackupDevice.bak'. Operating system error 112 (There is not enough space on the disk.).


If I do the backup to the MSSQL default backup directory (on C: ), the backup completes successfully. If I try to back up the master database (on C: ) to the backup directory I created on D:, the backup completes successfully. If I try to back up the master database to the MSSQL default backup directory (on C: ), the backup completes successfully.

The SqlServer and SqlAgent processes are both running under a domain user account, and that account has full control of my backup directory on D:. I should also mention that my D: drive has over 100GB free, and the database is only 330MB. It is a simple database model.

I've searched all day today trying to find the solution to this issue, and I can't find anything relevant. Could someone please help me!!! I'm about at my wit's end!

Thanks in advance,
Greg

View 20 Replies View Related

Copying Tables From 2005 To Another Is Failing

May 9, 2007

HI,
I current have two 2005 boxes running 9.0.3050 in different DMZ with the source running a DTS to drop and copy its tables to the source every night. It was working up until last thursday. Nothing has changed in the FW rules and getting no errors. One is 3.5GB which copies fine, the other is 21GB and runs all night with only getting a fraction of the tables populated. I'm the hardware guy, but have some understanding w/ sql. Thanks in advance for any help.

View 1 Replies View Related

SQL 2005 JOB Contains Rebuild Index Failing

Dec 4, 2007

SQL Server 2005 version: 2153
I created a maintplan for system and user databases includes rebuild index, maint cleanup tasks.

Job is failing for user databases
It includes rebuild index task( online index enabled) and maintenance cleanup task, scheduled at every sunday 1 AM.


I receive following errors:

In eventvwr log

sql server scheduled job 'DBMP_RebuildIndex_User'
status: failed-Invoked on 2007-12-02 -1:00 Message: The job failed. The job was invoked by schedule 8 ('DBMP_RebuildIndex_User-Schedule).The last step to run was step1 ('DBMP_RebuildIndex_User')[/red]

In log report:

Failed:(-1073548784) Excuting the query "ALTER INDEX [XPKact_log] ON
[dbo].[act log] REBUILD WITH (PAD_INDEX=OFF,
STATISTICS_NORECOMPUTE=OFF,ALLOW_ROW_LOCKS=ON,ALLOW_PAGE_LOCKS=ON,SORT_IN_TEMPDB=OFF,ONLINE=ON)
"failed with the following error "Online index operation cannot be performed for index 'XPKact_log' because the index contains column 'action_desc' of data type text, ntext.image.varchar(max),varbinary(max) or xml. For non clusterd index the column could be an include column of the index. for clusterd index it could be any column of the table .Incase of drop_existing the cloumn could be part of new or old index. The operation must be performed offline". Possible failure reasons : Problems with the querey .'" Resultset" property not set correctly, parameters not set correctly, or connection not established correctly.

Please anyone help me on this?
I really appriciate

Thnks

View 1 Replies View Related

Some Times, SQL Express That Comes With VS 2005 If Failing.

Aug 19, 2007

Hi,

I installed VS 2005, but the optional component SQL Express is failing. The log says "SQL Express installation stopped due to unexpected errors". Can some one help me out how to resolve this issue?

Regards,
-Aazad.

View 3 Replies View Related

SQL 2005 SP2 Upgrade, And Now Uninstall Failing.

Aug 16, 2007

Fresh install of Server 2003 R2 Enterprise with SP2 slipstreamed.
Fresh install of SQL Server 2005 Enterprise RTM.
Manual install of SQL Server 2005 SP2, Database Engine failed.
Uninstall SQL Server 2005, Database Engine failed to uninstall ("Fatal error during installation.").


This is on a DC, and still failes to uninstall after a reboot.

Ideas on how I can clean this up without a format ?

Log Snip:

GetServiceUserGroup failed for MSSQLSERVER, 5 Error Code: 0x80070534 (1332)
Windows Error Text: No mapping between account names and security IDs was done.
Source File Name: sqlcasqlcax.cpp
Compiler Timestamp: Wed Sep 21 01:10:12 2005
Function Name: SetInstanceProperty
Source Line Number: 1196

Error Code: 1332
MSI (s) (74!34) [20:09:48:406]: Product: Microsoft SQL Server 2005 -- Error 29528. The setup has encountered an unexpected error while Setting Internal Properties. The error is: Fatal error during installation.
Error 29528. The setup has encountered an unexpected error while Setting Internal Properties. The error is: Fatal error during installation.

View 2 Replies View Related

SQL 2005 Failing To Install On Virtual Server.

Apr 7, 2008

Sql 2005 Enterprise fails to install on a 64 bit VmWare Windows 2003 virtual server. All componets install up to including the Reporting services. The next componet (I believe it is the management studio portion) fails to install. I have moved the install files to the local machine and this did not help. If someone knows how to fix this please share.

Dave Hensley

View 1 Replies View Related

SQL Job Setup To Run SSIS 2005 Package Is Failing

Mar 9, 2006

I keep getting a failure when trying to run my agent which is trunning an SSIS 2005 package.  I have checked the logins and appear to have given the right logins owner to the msdb database and my other databases but still getting this error:

03/09/2006 10:13:31,Run EBN Process,Error,0,BG-22SQL,Run EBN Process,(Job outcome),,The job failed.  The Job was invoked by User domainmyuserid.  The last step to run was step 1 (Run EBN SSIS Package).,00:00:02,0,0,,,,0
03/09/2006 10:13:31,Run EBN Process,Error,1,BG-22SQL,Run EBN Process,Run EBN SSIS Package,,Executed as user: domainaccount_we_setup_to_run_all_sql_services_on_this_server. The package execution failed.  The step failed.,00:00:02,0,0,,,,0

Is it the package that is failing or permission issue?

View 6 Replies View Related

SQL Server 2005 Express Failing To Install

Feb 25, 2008

I don't know where to turn to.
[Setup has detected a problem with Microsoft .Net Framework installation and cannot proceed. Microsoft .Net Framwork is either not installed on this system or is corrupt.]

I'm going around in circles (for days and I'm furious...sorry!)

I've a new laptop with Vista Home Premium and trying to install VS 2005 together with SQL 2005 Express.
I got VS2005 installed (told me issues with SQL Express so failed on that part of it).
Installed Service packs for VS2005 then a service pack for VS2005 on Vista.
Tried to install SQLEXPR_ADV.exe (newest SQL 2005 with advanced features and came upon the above message).

I just don't know what to do next...this is my 10th day at trying to get something to work with this operating system.

Please help! Thanks in anticipation.

View 7 Replies View Related

SQL Server 2005 - Replication - Snapshot Failing

Dec 14, 2006

I have a "merge" publication created, with only Procedures, Views and Functions. (Note I have other merge publications that replicate the tables from the same database). I keep getting the same error (see -below) on various procedures. I cannot find anything wrong with the procedures themselves. I also checked the offending procedure by removing it from the publication and compiling it in the database...it works fine. None of my other publications (all tables) encounter this error. * I have 3 others.

My version of SQL is 9.00.1399.06

Here is the message I am getting. Any help would be greatly appreciated. Note I changed the proc name due to client restrictions.


Message: StartIndex cannot be less than zero.
Parameter name: startIndex
Command Text:
select 'number' = convert(int, 0), 'definition' = definition
from sys.sql_modules
where object_id = object_id(@qualified_object_name)
union all
select 'number' = convert(int, procedure_number), 'definition' = definition
from sys.numbered_procedures
where object_id = object_id(@qualified_object_name)
Parameters: @qualified_object_name = [dbo].[pra_merge]

Stack: at Microsoft.SqlServer.Replication.AgentCore.ExecuteWithOptionalResults(CommandSetupDelegate commandSetupDelegate, ProcessResultsDelegate processResultsDelegate, Int32 queryTimeout, CommandBehavior commandBehavior)
at Microsoft.SqlServer.Replication.AgentCore.ExecuteWithOptionalResults(CommandSetupDelegate commandSetupDelegate, ProcessResultsDelegate processResultsDelegate, CommandBehavior commandBehavior)
at Microsoft.SqlServer.Replication.Snapshot.SmoScriptingManager.TextModeOnObjectScripter.Script()
at Microsoft.SqlServer.Replication.Snapshot.SmoScriptingManager.GenerateNonTableArticleSchScript(Scripter scripter, BaseArticleWrapper articleWrapper, SqlSmoObject smoObject, Boolean quotedIdentifierOn, Boolean ansiNullsOn, Boolean textMode)
at Microsoft.SqlServer.Replication.Snapshot.SmoScriptingManager.GenerateStoredProcedureArticleScripts(ArticleScriptingBundle articleScriptingBundle)
at Microsoft.SqlServer.Replication.Snapshot.MergeSmoScriptingManager.GenerateArticleScripts(ArticleScriptingBundle articleScriptingBundle)
at Microsoft.SqlServer.Replication.Snapshot.SmoScriptingManager.GenerateObjectScripts(ArticleScriptingBundle articleScriptingBundle)
at Microsoft.SqlServer.Replication.Snapshot.SmoScriptingManager.DoScripting()
at Microsoft.SqlServer.Replication.Snapshot.SqlServerSnapshotProvider.DoScripting()
at Microsoft.SqlServer.Replication.Snapshot.MergeSnapshotProvider.DoScripting()
at Microsoft.SqlServer.Replication.Snapshot.SqlServerSnapshotProvider.GenerateSnapshot()
at Microsoft.SqlServer.Replication.SnapshotGenerationAgent.InternalRun()
at Microsoft.SqlServer.Replication.AgentCore.Run() (Source: MSSQLServer, Error number: 52006)
Get help: http://help/52006

Source: mscorlib
Target Site: System.Text.StringBuilder Remove(Int32, Int32)
Message: StartIndex cannot be less than zero.
Parameter name: startIndex
Stack: at System.Text.StringBuilder.Remove(Int32 startIndex, Int32 length)
at Microsoft.SqlServer.Replication.Snapshot.SmoScriptingManager.TextModeOnObjectScripter.ProcessGetObjectScriptResult(SqlDataReader dataReader)
at Microsoft.SqlServer.Replication.AgentCore.ExecuteWithOptionalResults(CommandSetupDelegate commandSetupDelegate, ProcessResultsDelegate processResultsDelegate, Int32 queryTimeout, CommandBehavior commandBehavior) (Source: mscorlib, Error number: 0)

View 8 Replies View Related

Distributed Transaction Between 2005 && 2000 Failing

Sep 19, 2007



Hi Folks,



I have been struggling with a problem for the last couple days now regarding MSTD and distributed transactions. The main issue is that 3 servers are each sitting in a different domain. Non of the domains trust each other.

As of yesterday, I could get all the SQL 2005 chatting to each other using MSDTC without a problem. However, I have a SQL 2000 box which refuses to work. A normal query across a linked server works fine. A distributed transaction will not work. This is the case from A to B and B to A.

I have tested with DTCPing and it says all is ok.



The error messages are:

SQL 2000 > SQL 2005

OLE DB provider "SQLNCLI" for linked server "T-ServerTServer" returned message "No transaction is active.".

Msg 7391, Level 16, State 2, Line 2

The operation could not be performed because OLE DB provider "SQLNCLI" for linked server "T-ServerTServer" was unable to begin a distributed transaction.

And the other way round:

[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]

OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a].

Msg 7391, Level 16, State 1, Line 2

The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.

If watching the DTC monitor, it shows an active transaction then goes back to 0.

All instances are on a 4 node cluster with 3 nodes turned off for the testing.

I have run out of things to try. Most of the symptoms for the above messages are to do with DTC security, the Turn RPC Security Off reg hack. All instances and OS (W2K3) are the latest updates / patches.

As for the 3rd server, SQL 2005, it is happy to talk

Anybody got a gem which I can try?

Edit: Both SQL 2005 servers are x64 while the 2000 is x86




Cheers,
Crispin

View 3 Replies View Related

SQL 2005 Failover Cluster Install Failing.

Nov 6, 2007

I am tying to set up an SQL 2005, SP1 failover cluster on a new set of hardware. Everytime I try to run the install, I get this error




TITLE: Microsoft SQL Server 2005 Setup
------------------------------

Setup failed to start on the remote machine. Check the Task scheduler event log on the remote machine.



I've gone through this doc (http://msdn2.microsoft.com/en-us/library/ms189910.aspx) and checked all of the applicable cautions:

I don't have an antivirus package running.

All of the SQL setup pre-checks run fine.

I have a SQL Group created, with the shared drive as a resource.

NBT is disabled on both heartbeat NIC's.

NBT is explicitly enabled on both external NIC's.

While I do have DDNS running, just to be safe I've pre-created an A record for my SQL VR.

Both nodes are registered in DNS and Setup correctly finds the second node.

In the Application event log on the second node (the one failing...), I get MSI Installer 'Install Started' successes (and sometimes I even get "Product: Microsoft SQL Server 2005 -- Installation completed successfully.")

I am running the install as myself, a Domain Admin and am explicitly added to the Administrators group on both servers.

Remote Registry is running.

Task Scheduler is running.

There is plenty of space everywhere.

All of the Admin shares are enabled.

The node I am running the install from is the owner of all of the cluster groups and resources:


Cluster group

MSDTC group

SQL group

This is all that is in my setup log:


Microsoft SQL Server 2005 9.00.1399.06
==============================
OS Version : Microsoft Windows Server 2003 family, Enterprise Edition Service Pack 2 (Build 3790)
Time : Tue Nov 06 16:45:52 2007

Task did not appear to start on machine: \ERLEW01B: 267013


I'm at a total loss and I'm getting very frustrated...

Ed

View 5 Replies View Related

SSE 2005 W/ Advanced Services SP1 Upgrade Setup Failing

Oct 3, 2006

I'm trying to upgrade an existing installation of SSE 2005 to SSE 2005 with Advanced Services SP1 so I can take advantage of Reporting Services. I'm installing on a box that has XP Pro SP2 installed. As prompted by the SSE setup, I had to install IIS. After installing IIS, the setup went along okay until it came time to configure the report server. I chose the default (configure with the default configuration) and I get the following error message:

TITLE: Microsoft SQL Server Setup
------------------------------

SQL Server Setup failed to obtain system account information for the ASPNET account. To proceed, reinstall the .NET Framework, and then run SQL Server Setup again.

For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&EvtSrc=setup.rll&EvtID=SQLSetup90&EvtType=28126

------------------------------
BUTTONS:

OK
------------------------------


Anybody know what is causing the error and how to fix it? I tried the above link and it didn't provide any helpful information. Do I really need to reinstall the .Net Framework (I'm hoping not)? Any help would be greatly appreciated.

Thanks,

Tony

View 3 Replies View Related

Keep Failing On Trying To Install SQL 2005 Express (I've Read Many Posts But Still No Solution)

Jan 2, 2008

I use Widows Vista Business, have uninstalled all previous versions of SQL before installing SQL 2005 Express.

At first, I faced "Receiving WMI configuration error. SQL Server System Configuration cannot be executed due to to WMI configuration on this computer Error:2147749896 (0x80041008)."

Then, I tried this cmd someone posted as:





FIXWMI.CMD
------------------------

@echo on
cd /d c: emp
if not exist %windir%system32wbem goto TryInstall
cd /d %windir%system32wbem
net stop winmgmt
winmgmt /kill
if exist Rep_bak rd Rep_bak /s /q
rename Repository Rep_bak
for %%i in (*.dll) do RegSvr32 -s %%i
for %%i in (*.exe) do call :FixSrv %%i
for %%i in (*.mof,*.mfl) do Mofcomp %%i
net start winmgmt
goto End

:FixSrv
if /I (%1) == (wbemcntl.exe) goto SkipSrv
if /I (%1) == (wbemtest.exe) goto SkipSrv
if /I (%1) == (mofcomp.exe) goto SkipSrv
%1 /RegServer

kipSrv
goto End

:TryInstall
if not exist wmicore.exe goto End
wmicore /s
net start winmgmt
:End

I tried to install SQL2005 Express again, but then it gives:

Error 1603 installing Microsoft SQL Native Client.

View 1 Replies View Related

SQL 2005 E-mail Client Failing To Send Email Based On Job Status....

Mar 4, 2008

Kind of a newby sql question, but here goes:I have a sql 2005 database that I have a job that runs Sunday morning at 12:30 am.  I set it up using SQL Svr Mgt Studio 2005. Under  the Management directory I set up Database Mail to work with my local SMTP server. I can send a test email just fine.I then set myself up as an operator with my email address. (Under operators directory) I then went back to the properties of the job I set up, and under 'notification', chose e-mail operator (me) when Job Succeeds. The job runs, itt suceeds, but NO email!It flat out won't work. there are NO entries in teh( email) log for errors either.  Anyone? TIA  Dan  OR is it better to script these jobs using xml? I don't have time to learn a new thing right now, just need it to work!  

View 1 Replies View Related

SQLServer 2005 Service Pack 2 Client Components Is Failing To Install

May 25, 2007

I have Windows XP Professional Version 2002 Service Pack2.

I Have:

Microsoft SQL Server Management Studio 9.00.2047.00
Microsoft Analysis Services Client Tools 2005.090.2047.00
Microsoft Data Access Components (MDAC) 2000.085.1117.00 (xpsp_sp2_rtm.040803-2158)
Microsoft MSXML 2.6 3.0 5.0 6.0
Microsoft Internet Explorer 7.0.5730.11
Microsoft .NET Framework 2.0.50727.42
Operating System 5.1.2600





Service Pack is failing to Install CLIENT COMPONENTS; message is:



Product : Client Components
Product Version (Previous): 2047
Product Version (Final) :
Status : Failure
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQLTools9_Hotfix_KB921896_sqlrun_tools.msp.log
Error Number : 29549
Error Description : MSP Error: 29549 Failed to install and configure assemblies c:Program FilesMicrosoft SQL Server90NotificationServices9.0.242Binmicrosoft.sqlserver.notificationservices.dll in the COM+ catalog. Error: -2147024894
Error message: The system cannot find the file specified.
Error description: Could not load file or assembly 'System.EnterpriseServices, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.



This situation, I am guessing, also preventing me to run import/export from the SQLServer Client.



Any help is appreciated. Thanks.

View 6 Replies View Related

SQL Server Mobile 2005 Merge Replication Failing Over SSL, But Can Browse Through Pocket IE.

Jan 28, 2008

Hi All, this system is scheduled to go live in near to a day... but i have hit an issue when switching on SSL. Any help would be greatly appreciated.

Device Env:
Windows Mobile 5.0 + Messaging and Security Feature Pack
SQL Server Mobile 2005.

Merge replication works fine without SSL. After running the Configure Web Sync wizzard to setup SSL merge replication no longer works. Note i checked using pocket IE by browsing to https://mycompany.com/pub/sqlcesa30.dll?diag and all worked fine. There was no prompt saying the cert was bad etc.

The certificate is a:
Equifax secure global ebusiness CA-1 cert.
Signature algorithm md5RSA
public key RSA(1024 bits)
thumbprint algorithm sha1

Stacktrace given is:
- ex {"A request to send data to the computer running IIS has failed. For more information, see HRESULT."} System.Data.SqlServerCe.SqlCeException
- Errors {System.Data.SqlServerCe.SqlCeErrorCollection} System.Data.SqlServerCe.SqlCeErrorCollection
Count 1 Integer
Item In order to evaluate an indexed property, the property must be qualified and the arguments must be explicitly supplied by the user. System.Data.SqlServerCe.SqlCeError
HResult -2147012858 Integer
InnerException Nothing System.Exception
Message "A request to send data to the computer running IIS has failed. For more information, see HRESULT." String
NativeError 28037 Integer
Source "Microsoft SQL Server 2005 Mobile Edition" String
StackTrace "at System.Data.SqlServerCe.NativeMethods.CheckHRESULT()
at System.Data.SqlServerCe.SqlCeReplication.Synchronize()
at MyApp.Helper.Replication.SynchronizeInit()
at MyApp.CallSynchronize()
at System.Windows.Forms.Control.OnGotFocus()
at System.Windows.Forms.Control.WnProc()
at System.Windows.Forms.ContainerControl.WnProc()
at System.Windows.Forms.Form.WnProc()
at System.Windows.Forms.Control._InternalWnProc()
at Microsoft.AGL.Forms.EVL.EnterMainLoop()
at System.Windows.Forms.Application.Run()
at MyApp.Program.Main()

View 2 Replies View Related

SQL SERVER 2005 REPLICATION (MERGE AGENT FAILING : PUSH SUBSCRIPTION)

Mar 27, 2006

ERROR MESSAGE:

"Message: Incorrect syntax near 'NoteID'."

Here is a snipet from the output file:

2006-03-27 13:01:49.820 Skipping file 'NotesHistory_21.sch' because it has already been delivered for a previous article or by a previously interrupted snapshot.
2006-03-27 13:01:49.867 OLE DB Subscriber 'LUZERNV4-PDOSQL4': SET ANSI_NULLS ON

2006-03-27 13:01:49.898 OLE DB Distributor 'LARGOS00-SDI': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2006-03-27 13:01:49.945 OLE DB Subscriber 'LUZERNV4-PDOSQL4': SET QUOTED_IDENTIFIER ON

2006-03-27 13:01:50.008 [17%] OLE DB Subscriber 'LUZERNV4-PDOSQL4': CREATE TABLE [dbo].[MSmerge_conflict_EFILE_MERGE_NotesHistory](
[NoteID] [int] NOT NULL,
[CaseRefNum] [int] NOT NULL,
[KeyField] [varchar](500) NOT NULL,
[KeyValue] [varchar](500) NOT NULL,
[Note] [varchar](800) NULL,
[NoteField] [varchar](100) NULL,
[ScanDocID] [int] NULL,
[PDF_ID] [int] NULL,
[RescanCode] [int] NULL,
[RescanNote] [varchar](100) NULL,
[AuditID] [bigint] NOT NULL,
[rowguid] [uniqueidentifier] ROWGUIDCOL NOT NULL
)


ꜽśã¹? êœ?Å›B 27 13:01î–”Å›è›ªç —êœ?Å›é”?Ä€Percent Complete: 17
2006-03-27 13:01:50.086 OLE DB Subscriber 'LUZERNV4-PDOSQL4': SET ANSI_NULLS ON


2006-03-27 13:01:50.117 Preparing table 'NotesHistory' for merge replication
2006-03-27 13:01:50.164 OLE DB Subscriber 'LUZERNV4-PDOSQL4': SET QUOTED_IDENTIFIER ON


2006-03-27 13:01:50.195 OLE DB Distributor 'LARGOS00-SDI': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2006-03-27 13:01:50.258 OLE DB Subscriber 'LUZERNV4-PDOSQL4': if object_id('MSmerge_conflicts_info') is not NULL
alter table [MSmerge_conflict_EFILE_MERGE_NotesHistory] add origin_datasource_id uniqueidentifier NULL

2006-03-27 13:01:50.351 OLE DB Subscriber 'LUZERNV4-PDOSQL4': if object_id('MSmerge_conflicts_info') is not NULL
create nonclustered index [ncMSmerge_conflict_EFILE_MERGE_NotesHistory] on [MSmerge_conflict_EFILE_MERGE_NotesHistory] ([rowguid], origin_datasource_id)

2006-03-27 13:01:50.383 OLE DB Subscriber 'LUZERNV4-PDOSQL4': exec sp_MSsetconflicttable @article = N'NotesHistory', @conflict_table = N'MSmerge_conflict_EFILE_MERGE_NotesHistory'

2006-03-27 13:01:50.430 OLE DB Subscriber 'LUZERNV4-PDOSQL4': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2006-03-27 13:01:50.476 [17%] The merge process was unable to deliver the snapshot to the Subscriber. If using Web synchronization, the merge process may have been unable to create or write to the message file. When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write.Percent Complete: 17
2006-03-27 13:01:50.50é”?Ä€
2006-03-27 13:01:50.539 Applied script 'NotesHistory_21.cft'
2006-03-27 13:01:50.586 OLE DB Subscriber 'LUZERNV4-PDOSQL4': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2006-03-27 13:01:50.617 OLE DB Distributor 'LARGOS00-SDI': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2006-03-27 13:01:50.711 Percent Complete: 17
2006-03-27 13:01:50.742 {call sp_MSsetconflicttable (N'NotesHistory', N'MSmerge_conflict_EFILE_MERGE_NotesHistory', N'LARGOS00-SDI', N'EFILE', N'EFILE_MERGE')}
2006-03-27 13:01:50.773 OLE DB Distributor 'LARGOS00-SDI': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2006-03-27 13:01:50.867 Percent Complete: 0
2006-03-27 13:01:50.898 Category:COMMAND
Source: Failed Command
Number: 0
Message: {call sp_MSsetconflicttable (N'NotesHistory', N'MSmerge_conflict_EFILE_MERGE_NotesHistory', N'LARGOS00-SDI', N'EFILE', N'EFILE_MERGE')}
2006-03-27 13:01:50.961 Percent Complete: 0
2006-03-27 13:01:50.992 Category:SQLSERVER
Source: LUZERNV4-PDOSQL4
Number: 102
Message: Incorrect syntax near 'NoteID'.
2006-03-27 13:01:51.039 Percent Complete: 0
2006-03-27 13:01:51.070 Category:NULL
Source: Merge Replication Provider
Number: -2147201001
Message: The merge process was unable to deliver the snapshot to the Subscriber. If using Web synchronization, the merge process may have been unable to create or write to the message file. When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write.
2006-03-27 13:01:51.133 Disconnecting from OLE DB Subscriber 'LUZERNV4-PDOSQL4'
2006-03-27 13:01:51.180 Disconnecting from OLE DB Subscriber 'LUZERNV4-PDOSQL4'
2006-03-27 13:01:51.226 Disconnecting from OLE DB Subscriber 'LUZERNV4-PDOSQL4'
2006-03-27 13:01:51.258 Disconnecting from OLE DB Subscriber 'LUZERNV4-PDOSQL4'
2006-03-27 13:01:51.305 Disconnecting from OLE DB Publisher 'LARGOS00-SDI'
2006-03-27 13:01:51.336 Disconnecting from OLE DB Publisher 'LARGOS00-SDI'
2006-03-27 13:01:51.383 Disconnecting from OLE DB Publisher 'LARGOS00-SDI'
2006-03-27 13:01:51.414 Disconnecting from OLE DB Publisher 'LARGOS00-SDI'
2006-03-27 13:01:51.445 Disconnecting from OLE DB Distributor 'LARGOS00-SDI'
2006-03-27 13:01:51.492 Disconnecting from OLE DB Distributor 'LARGOS00-SDI'
2006-03-27 13:01:51.523 The merge process will restart after waiting 60 second(s)...

View 1 Replies View Related

SqlCeConnection Failing To Open A Connection To The SQL Server 2005 Mobile Edition

Apr 15, 2008

Good day,

I am writing an application using VB.Net 2005 for the Windows CE 5.0 device and it is connecting to a SQL Server 2005 Mobile Edition Database.
The trouble I'm having is establishing a connection to a SQL Server Mobile database on the device.

Here is the code I am using:




Code Snippet
Public gConnectionString As String = "Data Source=Program FilesMobAppMobDB.sdf;Persist Security Info=False;"




Code Snippet

Imports System.Data.SqlServerCe

Public Class DBManager

Public Shared gSQLCEConnection As SqlCeConnection


Public Shared Function OpenDB() As Boolean

If gSQLCEConnection IsNot Nothing Then

Throw New InvalidOperationException("Connection already open.")
End If
gSQLCEConnection = New SqlCeConnection(gConnectionString)
Try

gSQLCEConnection.Open() 'Error occurs here
Return True
Catch ex As SqlCeException

MsgBox(ex.Message & vbCrLf & ex.HResult & vbCrLf & ex.NativeError & vbCrLf & ex.Source)
Return False
End Try
End Function


In the immediate window I recieve the following messages:


A first chance exception of type 'System.IO.FileNotFoundException' occurred in mscorlib.dll

A first chance exception of type 'System.IO.FileNotFoundException' occurred in mscorlib.dll

A first chance exception of type 'System.UnauthorizedAccessException' occurred in mscorlib.dll

A first chance exception of type 'System.UnauthorizedAccessException' occurred in mscorlib.dll

A first chance exception of type 'System.UnauthorizedAccessException' occurred in mscorlib.dll

A first chance exception of type 'System.IO.FileNotFoundException' occurred in mscorlib.dll

A first chance exception of type 'System.IO.FileNotFoundException' occurred in mscorlib.dll

A first chance exception of type 'System.UnauthorizedAccessException' occurred in mscorlib.dll

A first chance exception of type 'System.Data.SqlServerCe.SqlCeException' occurred in System.Data.SqlServerCe.dll


I believe that the first few lines are caused by the icons/pictures that I have included with my app, but the SqlCeException line occurs when the connection to the .SDF file is trying to be established.

Here is the exception output:

Message: "" (Blank)
HResult: -2147024882
NativeError: 0
Source: SQL Server 2005 Mobile Edition ADO.NET Data Provider

Programs under Remove Programs on the PDA are:
Microsoft .NET CF 2.0 ENU-String R...
Microsoft .NET Compact Framework...
Microsoft SQL Client
Microsoft SQL Mobile 2005
Microsoft SQL Mobile 2005 [EN]
Microsoft SQL Server 2005 Compact...
Microsoft SQL Server 2005 Compact...
Microsoft SQL Server 2005 Compact...
Microsoft SQLCE 2.0
Microsoft SQLCE 2.0 Dev

Any ideas on what could be stopping this connection from being established? It was working before but all of a sudden just stopped. I have warm booted, cold booted, and rebuilt with no luck and also checked that SQL Query Analyzer is not running on the PDA and that the connection string is valid.
The call to OpenDB occurs in the form_load of the startup object.

Thanks in advance,

Leon

View 8 Replies View Related

FAILING UPDATE : Microsoft SQL Server 2005 Express Edition Service Pack 2 (KB 921896)

Feb 11, 2008

When updating automaticallly, this update always fail, I have put the configuration manager /server browser : the only one that was disabled, on manual (I have not the automatic option for this one) but nothing works, what can I do ? This is a new laptop I have got (XP pro) and I am going through the process of updating many things, only this one fails, any help appreciated.

View 5 Replies View Related

I Am Accessing Data Using Data Access Pages In IIS 7 To SQL Server 2005 Authentication Is Failing

Feb 5, 2007

is there a step by step paper to get there? here is what i need to consider. I Iwill have many customers that will need their own set of records and access pages "branded for their company" each customer will have many clients. I am hosting this application on a windows 2003 server with SQL 2005 server enterprise.

I am using windows authentication, I have created a username in windows, then i added the windows user in SQL management studio in security, granted "DB Read" and "DB write" and again under the database security tab. still from the web authentication fails. i must be nissing a step or two?

I expect to set up a username for each database as i setup new customers.

View 1 Replies View Related

SQL Server,SQL Server Agent,SQL Analysis Resources Failing In SQL 2005 Cluster

Aug 17, 2007

Hi.
I have installed an SQL 2005 Failover Cluster on a Two Node Active Passive Windows 2003 Cluster.If i am trying to failover from the Active node to the passive Node,The Sql Server,Sql Server Agent and SQL Analysis resources fail,However if i reset the passowrd in the services tab of the above three services on the pasive node,the resources come online.
Below is the brief of my setup
1.I have two Active directory domain controllers running Windows 2003 R2 Standard edition with SP2.
2.i have installed a Windows 2003 Two Node Active Passive Cluster as NODE1 and NODE2.
3.The Domain account used to install WIndows 2003 A/P Cluster is Clusteradmin.This account is the member of Administartors on the Domain as well as the Local Admin on NODE1 and NODE2.
4.SQL 2005 with SP2 is installed on both the Nodes as SQL 2005 Failover Cluster.The account used to install SQL 2005 is sqadmin.This account is the member of Administartors on the domain and the member of Local Admins on NODE1 and NODE2.
5.SLQ 2005 has four domain groups for 4 SQL Services.The Services are SQL Server,SQL Server Agent,SLQ Anaylisis Server and Full text Search.
6.Each of these servcie has a seperate service account created for them.All these service accounts areb the members of domain admin and the member of Local Admin on NODE1 and NODE2.
7.Each of these servcies is running under these servcie accounts in the Servcies tab in NODE1 and NODE2.
8.If i fail the resources from NODE1 to NODE2 ,The SQL Server,SQL Server Agent and SQL Anaylisis resources are failing.on going to the service tab of NODE 2 I reset the password for these services,the services come online.
10.The Cluster resources and MSDTC Resources are Failing over successfully.They are coming online successfully.
11,I have a problem with the SQL Server Resources,even if i failback to NODE1 from NODE2,the same resources are failing again.

Plz Advice.
Regards
Khalid

View 1 Replies View Related

SQL Server 2005 Install Keeps Failing To Install SQL Services (i.e. The Main Engine!).

Feb 6, 2007

I am currently running Windows XP Professional Service Pack2. It already has MSDE & SQL Server 2000 installed (although I just uninstalled MSDE in the vain hope that it might present the installer with a more straightforward upgrade).

I have tried installing with the default instance & a new instance (I don't really care - I just need to install the darn thing). I just want the basic database & Books On-line, nothing fancy.

Here is the Summary log, for what it's worth:


Microsoft SQL Server 2005 9.00.1399.06
==============================
OS Version : Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Time : Tue Feb 06 16:45:14 2007

Machine : ANTHONYY1
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_SQLSupport_1.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft SQL Server Native Client
Product Version : 9.00.2047.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_SQLNCLI_1.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft Office 2003 Web Components
Product Version : 11.0.6558.0
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_OWC11_1.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft SQL Server VSS Writer
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_SqlWriter_1.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft SQL Server 2005 Backward compatibility
Product Version : 8.05.1054
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_BackwardsCompat_1.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : MSXML 6.0 Parser (KB927977)
Product Version : 6.00.3890.0
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_MSXML6_1.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_SQLSupport_2.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft SQL Server Native Client
Product Version : 9.00.2047.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_SQLNCLI_2.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft Office 2003 Web Components
Product Version : 11.0.6558.0
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_OWC11_2.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft SQL Server 2005 Books Online (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_BOL_1.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft SQL Server 2005 Backward compatibility
Product Version : 8.05.1054
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_BackwardsCompat_2.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : MSXML 6.0 Parser (KB927977)
Product Version : 6.00.3890.0
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_MSXML6_2.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : SQLXML4
Error : Setup is preparing to continue with the installation.
--------------------------------------------------------------------------------





Here is the SQLSetup0011_ANTHONYY1_Core(Local).log

Microsoft SQL Server 2005 Setup beginning at Tue Feb 06 16:45:14 2007
Process ID : 2560
C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe Version: 2005.90.1399.0
Running: LoadResourcesAction at: 2007/1/6 16:45:14
Complete: LoadResourcesAction at: 2007/1/6 16:45:14, returned true
Running: ParseBootstrapOptionsAction at: 2007/1/6 16:45:14
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapxmlrw.dll Version:2.0.3604.0
Complete: ParseBootstrapOptionsAction at: 2007/1/6 16:45:14, returned true
Running: ValidateWinNTAction at: 2007/1/6 16:45:14
Complete: ValidateWinNTAction at: 2007/1/6 16:45:14, returned true
Running: ValidateMinOSAction at: 2007/1/6 16:45:14
Complete: ValidateMinOSAction at: 2007/1/6 16:45:14, returned true
Running: PerformSCCAction at: 2007/1/6 16:45:14
Complete: PerformSCCAction at: 2007/1/6 16:45:14, returned true
Running: ActivateLoggingAction at: 2007/1/6 16:45:14
Complete: ActivateLoggingAction at: 2007/1/6 16:45:14, returned true
Running: DetectPatchedBootstrapAction at: 2007/1/6 16:45:14
Complete: DetectPatchedBootstrapAction at: 2007/1/6 16:45:14, returned true
Action "LaunchPatchedBootstrapAction" will be skipped due to the following restrictions:
Condition "EventCondition: __STP_LaunchPatchedBootstrap__2560" returned false.
Action "BeginBootstrapLogicStage" will be skipped due to the following restrictions:
Condition "Setup is running locally." returned true.
Running: PerformDotNetCheck2 at: 2007/1/6 16:45:14
Complete: PerformDotNetCheck2 at: 2007/1/6 16:45:14, returned true
Running: InvokeSqlSetupDllAction at: 2007/1/6 16:45:14
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlspars.dll Version:2005.90.1399.0
<Func Name='DwLaunchMsiExec'>
Examining 'sqlspars' globals to initialize 'SetupStateScope'
Opening 'MachineConfigScope' for [ANTHONYY1]
Trying to find Product Code from command line or passed transform
If possible, determine install id and type
Trying to find Instance Name from command line.
No Instance Name provided on the command line
If possible, determine action
Machine = ANTHONYY1, Article = WMIServiceWin32OSWorking, Result = 0 (0x0)
Machine = ANTHONYY1, Article = WMIServiceWin32CompSystemWorking, Result = 0 (0x0)
Machine = ANTHONYY1, Article = WMIServiceWin32ProcessorWorking, Result = 0 (0x0)
Machine = ANTHONYY1, Article = WMIServiceReadRegWorking, Result = 0 (0x0)
Machine = ANTHONYY1, Article = WMIServiceWin32DirectoryWorking, Result = 0 (0x0)
Machine = ANTHONYY1, Article = WMIServiceCIMDataWorking, Result = 0 (0x0)
Machine = ANTHONYY1, Article = XMLDomDocument, Result = 0 (0x0)
Machine = ANTHONYY1, Article = Processor, Result = 0 (0x0)
Machine = ANTHONYY1, Article = PhysicalMemory, Result = 0 (0x0)
Machine = ANTHONYY1, Article = DiskFreeSpace, Result = 0 (0x0)
Machine = ANTHONYY1, Article = OSVersion, Result = 0 (0x0)
Machine = ANTHONYY1, Article = OSServicePack, Result = 0 (0x0)
Machine = ANTHONYY1, Article = OSType, Result = 0 (0x0)
Machine = ANTHONYY1, Article = iisDep, Result = 0 (0x0)
Machine = ANTHONYY1, Article = AdminShare, Result = 0 (0x0)
Machine = ANTHONYY1, Article = PendingReboot, Result = 70011 (0x1117b)
Machine = ANTHONYY1, Article = PerfMon, Result = 0 (0x0)
Machine = ANTHONYY1, Article = IEVersion, Result = 0 (0x0)
Machine = ANTHONYY1, Article = DriveWriteAccess, Result = 0 (0x0)
Machine = ANTHONYY1, Article = COMPlus, Result = 0 (0x0)
Machine = ANTHONYY1, Article = ASPNETVersionRegistration, Result = 0 (0x0)
Machine = ANTHONYY1, Article = MDAC25Version, Result = 0 (0x0)
*******************************************
Setup Consistency Check Report for Machine: ANTHONYY1
*******************************************
Article: WMI Service Requirement, Result: CheckPassed
Article: MSXML Requirement, Result: CheckPassed
Article: Operating System Minimum Level Requirement, Result: CheckPassed
Article: Operating System Service Pack Level Requirement, Result: CheckPassed
Article: SQL Compatibility With Operating System, Result: CheckPassed
Article: Minimum Hardware Requirement, Result: CheckPassed
Article: IIS Feature Requirement, Result: CheckPassed
Article: Pending Reboot Requirement, Result: CheckPassed
Article: Performance Monitor Counter Requirement, Result: CheckPassed
Article: Default Installation Path Permission Requirement, Result: CheckPassed
Article: Internet Explorer Requirement, Result: CheckPassed
Article: Check COM+ Catalogue, Result: CheckPassed
Article: ASP.Net Registration Requirement, Result: CheckPassed
Article: Minimum MDAC Version Requirement, Result: CheckPassed
<Func Name='PerformDetections'>
0
<EndFunc Name='PerformDetections' Return='0' GetLastError='0'>
<Func Name='DisplaySCCWizard'>
CSetupBootstrapWizard returned 1
<EndFunc Name='DisplaySCCWizard' Return='0' GetLastError='183'>
Failed to find help file for LCID :2057
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlsval.dll Version:2005.90.1399.0
<EndFunc Name='DwLaunchMsiExec' Return='0' GetLastError='0'>
Complete: InvokeSqlSetupDllAction at: 2007/1/6 16:49:35, returned true
Running: SetPackageInstallStateAction at: 2007/1/6 16:49:35
Complete: SetPackageInstallStateAction at: 2007/1/6 16:49:36, returned true
Running: DeterminePackageTransformsAction at: 2007/1/6 16:49:36
Complete: DeterminePackageTransformsAction at: 2007/1/6 16:49:47, returned true
Running: ValidateSetupPropertiesAction at: 2007/1/6 16:49:47
Complete: ValidateSetupPropertiesAction at: 2007/1/6 16:49:47, returned true
Running: OpenPipeAction at: 2007/1/6 16:49:47
Complete: OpenPipeAction at: 2007/1/6 16:49:47, returned false
Error: Action "OpenPipeAction" failed during execution.
Running: CreatePipeAction at: 2007/1/6 16:49:47
Complete: CreatePipeAction at: 2007/1/6 16:49:47, returned false
Error: Action "CreatePipeAction" failed during execution.
Action "RunRemoteSetupAction" will be skipped due to the following restrictions:
Condition "Action: CreatePipeAction has finished and passed." returned false.
Running: PopulateMutatorDbAction at: 2007/1/6 16:49:47
Complete: PopulateMutatorDbAction at: 2007/1/6 16:49:47, returned true
Running: GenerateRequestsAction at: 2007/1/6 16:49:47
SQL_Engine = 3
SQL_Data_Files = 3
SQL_Replication = 3
SQL_FullText = 3
SQL_SharedTools = 3
SQL_BC_DEP = 3
Analysis_Server = -1
AnalysisDataFiles = -1
AnalysisSharedTools = -1
RS_Server = -1
RS_Web_Interface = -1
RS_SharedTools = -1
Notification_Services = -1
NS_Engine = -1
NS_Client = -1
SQL_DTS = -1
Client_Components = 3
Connectivity = 3
SQL_Tools90 = 3
SQL_WarehouseDevWorkbench = 3
SDK = 3
SQLXML = 3
Tools_Legacy = 3
TOOLS_BC_DEP = 3
SQL_Documentation = 3
SQL_BooksOnline = 3
SQL_DatabaseSamples = -1
SQL_AdventureWorksSamples = -1
SQL_AdventureWorksDWSamples = -1
SQL_AdventureWorksASSamples = -1
SQL_Samples = -1
Complete: GenerateRequestsAction at: 2007/1/6 16:49:48, returned true
Running: CreateProgressWindowAction at: 2007/1/6 16:49:48
Complete: CreateProgressWindowAction at: 2007/1/6 16:49:48, returned true
Running: ScheduleActionAction at: 2007/1/6 16:49:48
Complete: ScheduleActionAction at: 2007/1/6 16:49:48, returned true
Skipped: InstallASAction.11
Skipped: Action "InstallASAction.11" was not run. Information reported during analysis:
No install request found for package: "sqlsupport", referred by package: "as", install will be skipped as a result.
Skipped: InstallASAction.18
Skipped: Action "InstallASAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "as", install will be skipped as a result.
Skipped: InstallASAction.22
Skipped: Action "InstallASAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "as", install will be skipped as a result.
Skipped: InstallASAction.9
Skipped: Action "InstallASAction.9" was not run. Information reported during analysis:
No install request found for package: "msxml6", referred by package: "as", install will be skipped as a result.
Skipped: InstallDTSAction
Skipped: Action "InstallDTSAction" was not run. Information reported during analysis:
No install request found for package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.11
Skipped: Action "InstallDTSAction.11" was not run. Information reported during analysis:
No install request found for package: "sqlsupport", referred by package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.12
Skipped: Action "InstallDTSAction.12" was not run. Information reported during analysis:
No install request found for package: "sqlncli", referred by package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.18
Skipped: Action "InstallDTSAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.22
Skipped: Action "InstallDTSAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.9
Skipped: Action "InstallDTSAction.9" was not run. Information reported during analysis:
No install request found for package: "msxml6", referred by package: "dts", install will be skipped as a result.
Skipped: InstallNSAction
Skipped: Action "InstallNSAction" was not run. Information reported during analysis:
No install request found for package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.11
Skipped: Action "InstallNSAction.11" was not run. Information reported during analysis:
No install request found for package: "sqlsupport", referred by package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.12
Skipped: Action "InstallNSAction.12" was not run. Information reported during analysis:
No install request found for package: "sqlncli", referred by package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.18
Skipped: Action "InstallNSAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.22
Skipped: Action "InstallNSAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.9
Skipped: Action "InstallNSAction.9" was not run. Information reported during analysis:
No install request found for package: "msxml6", referred by package: "ns", install will be skipped as a result.
Skipped: InstallRSAction.11
Skipped: Action "InstallRSAction.11" was not run. Information reported during analysis:
No install request found for package: "sqlsupport", referred by package: "rs", install will be skipped as a result.
Skipped: InstallRSAction.18
Skipped: Action "InstallRSAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "rs", install will be skipped as a result.
Skipped: InstallRSAction.22
Skipped: Action "InstallRSAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "rs", install will be skipped as a result.
Running: InstallSqlAction.11 at: 2007/1/6 16:49:48
Installing: sqlsupport on target: ANTHONYY1
Complete: InstallSqlAction.11 at: 2007/1/6 16:49:51, returned true
Running: InstallSqlAction.12 at: 2007/1/6 16:49:51
Installing: sqlncli on target: ANTHONYY1
Complete: InstallSqlAction.12 at: 2007/1/6 16:49:55, returned true
Running: InstallSqlAction.18 at: 2007/1/6 16:49:55
Installing: owc11 on target: ANTHONYY1
Complete: InstallSqlAction.18 at: 2007/1/6 16:49:56, returned true
Running: InstallSqlAction.21 at: 2007/1/6 16:49:56
Installing: sqlwriter on target: ANTHONYY1
Complete: InstallSqlAction.21 at: 2007/1/6 16:49:58, returned true
Running: InstallSqlAction.22 at: 2007/1/6 16:49:58
Installing: bcRedist on target: ANTHONYY1
Complete: InstallSqlAction.22 at: 2007/1/6 16:50:0, returned true
Running: InstallSqlAction.9 at: 2007/1/6 16:50:0
Installing: msxml6 on target: ANTHONYY1
Complete: InstallSqlAction.9 at: 2007/1/6 16:50:2, returned true
Running: InstallToolsAction.11 at: 2007/1/6 16:50:2
Installing: sqlsupport on target: ANTHONYY1
Complete: InstallToolsAction.11 at: 2007/1/6 16:50:5, returned true
Running: InstallToolsAction.12 at: 2007/1/6 16:50:5
Installing: sqlncli on target: ANTHONYY1
Complete: InstallToolsAction.12 at: 2007/1/6 16:50:8, returned true
Skipped: InstallToolsAction.13
Skipped: Action "InstallToolsAction.13" was not run. Information reported during analysis:
No install request found for package: "PPESku", referred by package: "tools", install will be skipped as a result.
Running: InstallToolsAction.18 at: 2007/1/6 16:50:8
Installing: owc11 on target: ANTHONYY1
Complete: InstallToolsAction.18 at: 2007/1/6 16:50:10, returned true
Running: InstallToolsAction.20 at: 2007/1/6 16:50:10
Installing: BOL on target: ANTHONYY1
Complete: InstallToolsAction.20 at: 2007/1/6 16:52:2, returned true
Running: InstallToolsAction.22 at: 2007/1/6 16:52:2
Installing: bcRedist on target: ANTHONYY1
Complete: InstallToolsAction.22 at: 2007/1/6 16:52:4, returned true
Running: InstallToolsAction.9 at: 2007/1/6 16:52:4
Installing: msxml6 on target: ANTHONYY1
Complete: InstallToolsAction.9 at: 2007/1/6 16:52:6, returned true
Skipped: InstallNSAction.10
Skipped: Action "InstallNSAction.10" was not run. Information reported during analysis:
No install request found for package: "sqlxml4", referred by package: "ns", install will be skipped as a result.
Running: InstallSqlAction at: 2007/1/6 16:52:7
Installing: sql on target: ANTHONYY1
Error: MsiOpenDatabase failed with 110
Failed to install package
This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer package.
Error: MsiOpenDatabase failed with 110 for MSI D:ServersSetupSqlRun_SQL.msi
Setting package return code to: 1620
Complete: InstallSqlAction at: 2007/1/6 16:52:27, returned false
Error: Action "InstallSqlAction" failed during execution. Error information reported during run:
Target collection includes the local machine.
Invoking installPackage() on local machine.
Running: InstallToolsAction.10 at: 2007/1/6 16:52:27
Installing: sqlxml4 on target: ANTHONYY1
Error Code: 0x8007006e (110)
Windows Error Text: The system cannot open the device or file specified.

Source File Name: sqlchainingminorbuildactionbehavior.cpp
Compiler Timestamp: Mon Jun 13 14:30:04 2005
Function Name: sqls::MinorBuildActionBehavior::modifyRequest
Source Line Number: 65

---- Context -----------------------------------------------
sqls::InstallPackageAction::perform

Complete: InstallToolsAction.10 at: 2007/1/6 16:55:59, returned false
Error: Action "InstallToolsAction.10" failed during execution. Error information reported during run:
Target collection includes the local machine.
Invoking installPackage() on local machine.
Action "InstallToolsAction" will return false due to the following preconditions:
Condition "Action: InstallToolsAction.10 has finished and failed." returned true.
Installation of package: "tools" failed due to a precondition.
Step "InstallToolsAction" was not able to run.
Skipped: InstallASAction
Skipped: Action "InstallASAction" was not run. Information reported during analysis:
No install request found for package: "as", install will be skipped as a result.
Skipped: InstallRSAction
Skipped: Action "InstallRSAction" was not run. Information reported during analysis:
No install request found for package: "rs", install will be skipped as a result.
Skipped: RepairForBackwardsCompatRedistAction
Skipped: Action "RepairForBackwardsCompatRedistAction" was not run. Information reported during analysis:
Action: "RepairForBackwardsCompatRedistAction" will be skipped due to the following condition:
Condition "sql was successfully upgraded." returned false. Condition context:
sql failed to upgrade and so the uninstall of the upgraded product will not occur.
Error: Action "UninstallForMSDE2000Action" failed during execution. Error information reported during run:
Action: "UninstallForMSDE2000Action" will be marked as failed due to the following condition:
Condition "sql was successfully upgraded." returned false. Condition context:
sql failed to upgrade and so the uninstall of the upgraded product will not occur.
Installation of package: "patchMSDE2000" failed due to a precondition.
Error: Action "UninstallForSQLAction" failed during execution. Error information reported during run:
Action: "UninstallForSQLAction" will be marked as failed due to the following condition:
Condition "sql was successfully upgraded." returned false. Condition context:
sql failed to upgrade and so the uninstall of the upgraded product will not occur.
Installation of package: "patchLibertySql" failed due to a precondition.
Skipped: UninstallForRS2000Action
Skipped: Action "UninstallForRS2000Action" was not run. Information reported during analysis:
Action: "UninstallForRS2000Action" will be skipped due to the following condition:
Condition "Action: InstallRSAction was skipped." returned true.
Running: ReportChainingResults at: 2007/1/6 16:55:59
Error: Action "ReportChainingResults" threw an exception during execution.
One or more packages failed to install. Refer to logs for error details. : 1620
Error Code: 0x80070654 (1620)
Windows Error Text: This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer package.

Source File Name: sqlchainingsqlchainingactions.cpp
Compiler Timestamp: Thu Sep 1 22:23:05 2005
Function Name: sqls::ReportChainingResults::perform
Source Line Number: 3097

---- Context -----------------------------------------------
sqls::HostSetupPackageInstallerSynch::postCommit
sqls::HighlyAvailablePackage::preInstall
led due to cancel code received from cancel source: 29539





...and here is the SQLSetup0011_ANTHONYY1_SQL.log:

=== Verbose logging started: 06/02/2007 16:52:14 Build type: SHIP UNICODE 3.01.4000.2435 Calling process: C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe ===
MSI (c) (00:54) [16:52:14:284]: Resetting cached policy values
MSI (c) (00:54) [16:52:14:284]: Machine policy value 'Debug' is 0
MSI (c) (00:54) [16:52:14:284]: ******* RunEngine:
******* Product: D:ServersSetupSqlRun_SQL.msi
******* Action:
******* CommandLine: **********
MSI (c) (00:54) [16:52:14:284]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (00:54) [16:52:14:284]: Grabbed execution mutex.
MSI (c) (00:54) [16:52:14:299]: Cloaking enabled.
MSI (c) (00:54) [16:52:14:299]: Attempting to enable all disabled priveleges before calling Install on Server
MSI (c) (00:54) [16:52:14:299]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (A4:98) [16:52:14:299]: Grabbed execution mutex.
MSI (s) (A4:00) [16:52:14:299]: Resetting cached policy values
MSI (s) (A4:00) [16:52:14:299]: Machine policy value 'Debug' is 0
MSI (s) (A4:00) [16:52:14:299]: ******* RunEngine:
******* Product: D:ServersSetupSqlRun_SQL.msi
******* Action:
******* CommandLine: **********
MSI (s) (A4:00) [16:52:21:080]: Note: 1: 2203 2: D:ServersSetupSqlRun_SQL.msi 3: -2147024873
MSI (s) (A4:00) [16:52:21:080]: MainEngineThread is returning 1620
MSI (c) (00:54) [16:52:21:080]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (00:54) [16:52:21:080]: MainEngineThread is returning 1620
=== Verbose logging stopped: 06/02/2007 16:52:21 ===



I suppose an error dialog (or log message) that actually told you what is wrong and then what to do is too much to ask for. (Or an installer than just copied all the files into place). :(



View 4 Replies View Related

JDBC 2005 Update Statement - Failing Multi Row Update.

Nov 9, 2007

It appears to update only the first qualifying row. The trace shows a row count of one when there are multiple qualifying rows in the table. This problem does not exist in JDBC 2000.

View 5 Replies View Related

Bcp Failing

Jan 4, 2001

i ran it from the command prompt. I used my nt account which belongs to the domain admin nt group. my account does have sql access as sa.

also on one of the servers all jobs are failing with the following message - Unable to Connect to Sql Server (local). The nt log records the error that the specific user sqlexec (this is the account on which sql executive runs) is not defined as a valid user of a trusted sql server connection. I am not able to change the security setting on this server using EM nor am i able to use the sql security manager. I get an access denied error. What is the workaround for this problem? Will stopping and restarting the sql service help?
------------

How did you run bcp? In dos prompt or as sql job? Which nt account did you run bcp under? Did you grant sql access for that nt account?


------------
aruna at 1/3/01 4:39:49 PM

Subject:
From:
Date: bcp failing (reply)
Ray Miao ()
1/3/01 4:15:33 PM

yes i did. it still gives me the same error - 18452 error not associated with a trusted connection
-----------------

Did you enable mixed login mode on the server?

------------
aruna at 1/3/01 2:55:59 PM


hello ray

It still does not work. I granted SA rights for the nt group via sql security manager. For one of the servers i get the following error message -
This sql server does not support Windows NT SQL Server Security stored procedures.


--------------
From:
Date: bcp over trusted connections failing (reply)
Ray Miao ()
1/3/01 12:51:50 PM

Use security manager to grant access for nt account.


------------
aruna at 1/3/01 11:59:49 AM

i am attempting to bcp using the -T (trusted connection) option in sql 6.5. the login security mode is set to integrated. the bcp is however failing with msg 18452 error not associated with a trusted connection. why is this happening? i do not want to hardcode the sa password in the bcp command.

thanks

View 1 Replies View Related

Help With Failing Job

May 10, 2006

I have an excutable on the c drive and I have created a job to run that excutable

In the Job
C:Folderjob.exe BA

The job was running until we had a power outage. Now I can get it to run with a scheduled job, the only way I can get it to run is typing it on the command line. I have tried droping and recreating this job but nothing works.

The error is: The stip did not generate any out put.

Do I need to troubleshoot the excutable which is a whole other beast.

Any help would be great.

Thanks

View 4 Replies View Related

SQL Job Failing

Apr 19, 2004

We have a sqljob keep failing if we set the ownership of the job other than 'sa'. Any idea why this fails?

View 6 Replies View Related

Job Failing

Aug 22, 2005

Hi,

View 6 Replies View Related

Job Failing

Apr 9, 2007

I have a scheduled job on a SQL 2000 database which is failing. Here is the error message :



The job failed. Unable to determine if the owner (cacisnasir) of job Integrity Checks Job for DB Maintenance Plan 'IDS' has server access (reason: Could not obtain information about Windows NT group/user 'cacisnasir'. [SQLSTATE 42000] (Error 8198)).



I am the SA on the instance. I wonder why would I be getting this error message? I am able to logon to this instance and browse and change things. So clearly it recognizes me. But when I run the job it fails. Wonder why? my SQL Server version is 8.0.

View 6 Replies View Related

[C#] Failing To Use SCOPY_IDENTITY()

Dec 20, 2004

Dear Reader,

Currently I am building an application for a theme park where I work as a trainee for school, one project for me is to rebuild all the hundreds of databases into a few sql driven application's. Now I got a problem whit the use of SCOPE_IDENTITY(). Because the data has to be correct before inserting it into the database I use the transact features of .NET and I create 1 SQL string wich I dump in that method. The problem is that I can't be able to use the value of SCOPE_IDENTITY() for some reason, maybe you guys see a mistake in the actual (dynamic) query:
Here is the query built up by my program to write the data (of a single form) into the database:

DECLARE @OID int;
INSERT INTO Medisch (med_za_ID, med_WeekNr, med_Enen, med_Bijzonderheden, med_AfwijkendGedrag, med_SexGedrag, med_GemAdemhaling, med_GemHoesten, med_Temperatuur, med_Conditie, med_BloedGeprikt, med_Cupje, med_BasisVis, med_Eetlust, med_GemGewicht)VALUES(3,1123,,'','','',,,,'','False','False',45,'',);
SELECT @OID = SCOPE_IDENTITY();
INSERT INTO Medisch_Medicijnen_Details (mmd_mmt_ID, mmd_med_ID, mmd_Hoeveelheid, mmd_Aantal) VALUES(@OID, 2,23, 23 );

Everything else works unless the SCOPE_IDENTITY() things.
I hope someone can help me out fixing this mistake.
Tnx in advanced,

Grz.
Stefan

View 10 Replies View Related

DTS Failing(very Urgent)

Feb 13, 2002

Sql Guru's,

I have some DTS packages some times failing.one day sucess and next day it's failing. The following error showing.
DTSRun: Executing... DTSRun OnStart: DTSStep_DTSExecuteSQLTask_3 DTSRun OnError: DTSStep_DTSExecuteSQLTask_3, Error = -2147217900 (80040E14) Error string: OLE DB provider 'SQLOLEDB' reported an error. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 Error Detail Records: Error: -2147217900 (80040E14); Provider Error: 7399 (1CE7) Error string: OLE DB provider 'SQLOLEDB' reported an error. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 Error: -2147217900 (80040E14); Provider Error: 7312 (1C90) Error string: [OLE/DB provider returned message: Timeout expired] Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 DTSRun OnFinish: DTSStep_DTSExecuteSQLTask_3 DTSRun OnStart: DTSStep_DTSExecuteSQLTask_1 DTSRun OnFinish: DTSStep_DTSExecuteSQLTask_1 DTSRu... Process Exit Code 1. The step failed.

Any body help me. This is very urgent

View 2 Replies View Related

Login Failing....

Apr 24, 2001

this is the message that i'm getting and i dont know what to do so that i can access my SQL databases thru cold fusion:

ODBC Error Code = 37000(Syntax error or access violation)

[Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.

i didnt have any problems with this database until i moved it over to another SQL server and tried the cold fusion front end to it. i dont know what to do now.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved