SQL 2012 :: Adding Article To Existing Transnational Replication?
Aug 5, 2014
In my local environment , i was setup transnational replication then i have added new article by using below script
EXEC sp_changepublication @publication = 'demo', @property =
N'allow_anonymous', @value='TRUE'
Go
EXEC sp_changepublication @publication = 'demo', @property =
N'immediate_sync', @value='TRUE'
EXEC sp_addarticle @publication = 'demo', @article ='employee',
[Code]....
But article not added and showing this error message The initial snapshot for article 'employee' is not yet available.
What is the issue, what can i do to add new article ? What did I mistake?
View 2 Replies
ADVERTISEMENT
Feb 11, 2005
Hi All,
I am having a server where replication is set up between 2 differnt databases. It is currently running. I want to add a couple of tables to the replication. I tried using sp_addArticle, but after executing it, in the properties of the publication it shows the new tables, but at the database level the tables are missing.
I tried with sp_addsubscription but I am getting strange error:
Server: Msg 14100, Level 16, State 1, Procedure sp_addsubscription, Line 240
Specify all articles when subscribing to a publication using concurrent snapshot processing.
What can I do to publish the tables into the target database?
Thanks in advance.
View 5 Replies
View Related
Sep 26, 2014
I have an existing publication in sql 2012 with 2 articles, and then I add 2 more articles. After that when I generate a snapshot, will the snapshot be generated for 2 new articles only or for all 4 articles?
I remember adding 1 new articles to one existing publication with 150 articles and when I generated snapshot, it was generated only for 1 article. But I don't remember clearly.
Does it behave differently for small and large number of articles?
-----Table Proc Index Performance TSQL &&%$#@*(#@$%.......------------
View 0 Replies
View Related
Mar 27, 2008
how to add new article within the existing replication
View 1 Replies
View Related
Aug 21, 2014
I have a table. I want to add 2 date columns. One when we are inserting any record it will show and another whenever the record updated to record that.
I want to insert dummy data for the previous dates. How to insert those dummy dates in batch wise?
View 3 Replies
View Related
May 6, 2015
I am getting inconsistent results when BULK INSERTING data from a tab-delimited text file. As part of my testing, I run the same code on the same file again and again, and I get different results every time! I get this on SQL 2005 and SQL 2012 R2.
We have an application that imports data from a spreadsheet. The sheet contains section headers with account numbers and detail rows with transactions by date:
AAAA.1234 /* (account number)*/
1/1/2015 $150 First Transaction
1/3/2015 $24.233 Second Transaction
BBBB.5678
1/1/2015 $350 Third Transaction
1/3/2015 $24.233 Fourth Transaction
My Import program saves this spreadsheet at tab-delimited text, then I use BULK INSERT to bring the data into a generic table full of varchar(255) fields. There are about 90,000 rows in each day's data; after the BULK INSERT about half of them are removed for various reasons.
Next I add a RowID column to the table with the IDENTITY (1,1) property. This gives my raw data unique row numbers.
I then run a routine that converts and copies those records into another holding table that's a copy of the final destination table. That routine parses though the data, assigning the account number in the section header to each detail row. It ends up looking like this:
AAAA.1234 1/1/2015 $150 First Purchase
AAAA.1234 1/3/2015 $24.233 Second Purchase
BBBB.5678 1/1/2015 $350 Third Purchase
BBBB.5678 1/3/2015 $24.233 Fourth Purchase
My technique: I use a cursor to get the starting RowID for each Account Number: I then use the upper and lower RowIDs to do an INSERT into the final table. The query looks like this:
SELECT RowID, SUBSTRING(RowHeader, 6,4) + '.UBC1' AS AccountNumber
FROM GenericTable
WHERE RowHeader LIKE '____.____%'
Results look like this:
But every time I run the routine, I get different numbers!
Needless to say, my results are not accurate. I get inconsistent results EVERY TIME. Here is my code, with table, field and account names changed for business confidentiality.
TRUNCATE TABLE GenericImportTable;
ALTER TABLE GenericImportTable DROP COLUMN RowID;
BULK INSERT GenericImportTable FROM 'SERVERGeneralAppnameDataFile.2015.05.04.tab.txt'
WITH (FIELDTERMINATOR = ' ', ROWTERMINATOR = '', FIRSTROW = 6)
ALTER TABLE GenericImportTable ADD RowID int IDENTITY(1,1) NOT NULL
SELECT RowID, SUBSTRING(RowHeader, 6,4) + '.UBC1' AS AccountNumber
FROM GenericImportTable
WHERE RowHeader LIKE '____.____%'
View 3 Replies
View Related
Sep 5, 2007
I have setup Transactional replication in SQL 2005 between two servers and have about 200 tables being replicated. The problem is that every time, I add or drop a table to replication, and start the Snapshot agent, it re-initializes every article and re-loads every article. This process takes 1 hour to complete and CPU usage goes to 100% during that time.
This behaviour seems very different from SQL 2000 where I would start Snapshot agent and only the relevant tables were added/dropped.
Has that functionality changed from 2000 to 2005? Am I not doing something right?
Thanks,
Amir
View 3 Replies
View Related
Feb 23, 2006
Hi
-- edited 26/02 to clarify the security model --
Using HTTPS merge replication
The subscriber was able to get the snapshot ok, then synchronise fine
However after adding an article to the publication and recreating the snapshot I get this error now at the subscriber
Microsoft.SqlServer.Replication.ComErrorException (0x80004005): A failure occurred when accessing 'usp_misc_dailyTasks_3.sch' due to an operating system error [2='The system cannot find the file specified.'] during Web synchronization. Ensure that the -InternetLogin user when using basic authentication and the user running the merge when using Windows integrated authentication has been granted access to the snapshot share.
at Microsoft.SqlServer.Replication.MergeSynchronizationAgent.Run()
The key properties when synchronising are as follows:
agent.PublisherSecurityMode = SecurityMode.Standard
agent.DistributorSecurityMode = SecurityMode.Standard
agent.InternetSecurityMode = SecurityMode.Standard
In order to create the subscription:
subscription.UseWebSynchronization = True
subscription.InternetUrl = webSyncUrl
subscription.InternetSecurityMode = AuthenticationMethod.BasicAuthentication
subscription.SubscriberType = MergeSubscriberType.Anonymous
subscription.SyncType = SubscriptionSyncType.Automatic
Thanks
Bruce
View 1 Replies
View Related
Apr 28, 2014
Is it possible to configure transnational replication between two different domains also non trusted domains.
It's possible means what i need to take care before configure replication and how to configure transnational replication between two different domains.
View 2 Replies
View Related
Aug 30, 2007
Hi all,
I know that adding a column using ALTER TABLE to add a column automatically allows SQLSERVER 2005 to replicate the schema changes to the subscribers, however, I would like to add a new column to an existing article that is being used for merge replication, however, I don't want this column to be replicated. Re-initialising the subscriptions is not a option. Help would be appreciated.
I am using SQLSERVER 2005 (SP1).
View 3 Replies
View Related
Jul 13, 2006
First of all; My Oracle publication works fine when I don't explicit specify the shema_option parameter for the articles I'm adding to the publication. The reason why I then want to explicit specify the parameter is as following.
I'm developing a replication solution to get data from our production server (Oracle) to our Data Warehouse (SQL Server). The SQL Server (and the Data Warehouse code) uses the SQL_Latin1_General_CP1_CI_AS collation. When I don't explicit specify the schema_option, the nvarchar columns of the replicated tables are created using the SQL_Latin1_General_CP1_CS_AS collation and this results in some comparison errors, when for instance a select statement is trying to compare two nvarchar strings using different collations.
I've tried to specify the schema_option parameter as "@schema_option = 0x80" (Replicates primary key constraints.) to avoid the use of the SQL_Latin1_General_CP1_CS_AS collation when creating the destination tables - I'm not sure it's enough? No matter what, I'm getting an error when I'm doing it (see below).
Message
2006-07-13 12:00:15.529 Applied script 'ITEMTRANSLATION_2.sch'
2006-07-13 12:00:15.544 Bulk copying data into table 'ITEMTRANSLATION'
2006-07-13 12:00:15.544 Agent message code 20037. The process could not bulk copy into table '"ITEMTRANSLATION"'.
2006-07-13 12:00:15.591 Category:NULL
Source: Microsoft SQL Native Client
Number: 208
Message: Invalid object name 'ITEMTRANSLATION'.
2006-07-13 12:00:15.591 Category:NULL
Source:
Number: 20253
The questions are now whether I actually have a schema_option alternative for Oracle Publishing? If so, what is the solution, and eventually how can I avoid the error stated above?
If I'm not able to avoid the article columns getting created with the "wrong" collation, is there then any other obviously solution to the problem?
Thanks!
Best regards,
JB
View 5 Replies
View Related
Oct 31, 2007
hi
i'm new to replication. i'm looking for a full article that explains Replication good, can u take a link to that article ?
thanks
View 5 Replies
View Related
Oct 14, 2014
Here's what my script boils down to when adding a new view (admin.replication_test):
Code:
EXEC sp_addarticle
@publication = N'<publication name>'
, @article = N'replication_test'
, @source_owner = N'admin'
, @source_object = N'replication_test'
, @type = N'view schema only'
;
If I check the GUI, the article appears to be ticked in the publication.
Generate a new snapshot.
View not found in replicated database!
View 9 Replies
View Related
Feb 3, 2001
Hi,
It would be very nice if some people out there, using merge replication can tell me their strategy to add Article through Enterprise Manager.
I have Merge Replication, I have new table which has to be replicated. I counld not find options in Wizard to add New article for replication.
Any Help will be appreciated.
Thanking you in anticipation
Cheers
Hemant
View 1 Replies
View Related
May 21, 2015
I want to remove article from my Transactional replication, can I just simply uncheck it from GUI, or it requires anything else.
View 3 Replies
View Related
Jan 22, 2005
Can any help me addition of article in runnning merge replication in MSSQL SERVER 2000 with SP3.
Any step by step help is realy great for me.
Thanks
R.Mall
View 1 Replies
View Related
Jun 6, 2015
I've created a merge replication a few days ago. it works correctly, but today when click synchronize publications, some of then encounter this error :
Data validation failed for one or more articles. When troubleshooting, check the output log files for any errors that may be preventing data from being synchronized properly. Note that when error compensation or delete tracking functionalities are disabled for an article, non-convergence can occur. (Source: MSSQL_REPL, Error number:
[Code] ....
View 2 Replies
View Related
Jan 24, 2007
Hi,
I'm setting up a heterogeneous transactional push replication with Sybase ASE 12.5.3 as subscriber. With management studio I try to create an procedure article with following properties
Copy extended properties : false
Destination object name : pGS_RefuseRequest
Destination object ownere : dbo
Action if name is in use : keep existing object unchanged
Replicate : Execution of the stored procedure
Create schemas at Subscriber : false
When I save the article and then the publication I got following error message:
Can not add artice 'pGS_RefuseRequest'.
Object was not found on server. Check if this object exists on the server. (Microsoft.SqlServer.Rmo)
That's realy strange because the wizard offered the procedure pGS_RefuseRequest in the list of possible articles.
Fortunatly I can create the article with following TSQL statement :
exec sp_addarticle @publication = N'RIGHTS_EDV_4T_pub'
, @article = N'pGS_RefuseRequest'
, @source_owner = N'dbo'
, @source_object = N'pGS_RefuseRequest'
, @type = N'proc exec'
, @description = N''
, @creation_script = N''
, @pre_creation_cmd = N'none'
, @schema_option = 0x00
, @destination_table = N'pGS_RefuseRequest'
, @destination_owner = N'dbo'
, @status = 0
go
Did anybody seen this bug before ?
It seems to be specific for heterogeneuous replication. In a pure MS environement the Wizard works fine!
Wolfgang Kunk
View 3 Replies
View Related
Oct 22, 2015
There is a SQL Server 2008 R2 SP3 Clustered Instance that has Transactional Replication. It is by no means a large replication setup in terms of data/article count. SQL Server was recently patched to SP3 and is current on Windows 2008 R2 Patches.
When I added a new article to replication (via 2014 SSMS GUI) it seems to add everything correctly (replication tables/procs show the new article as part of the publication).
The Publication is set to allow the snapshot to generate for just new articles (setting immediate_sync & allow_anonymous to false).
When the snapshot agent is run, it runs without error and claims to have generated a snapshot of 1 article. However the snapshot folder only contains a folder for the instance (that does have the modified time of the snapshot agent execution) and none of the regular bcp/schema files.
The tables never make it to the subscribers and replication continues on without error for the existing articles. No agents produce any errors and running the snapshot agent w/ verbose output provides no errors or insight into any possible issues.
I have tried:
- dropping/re-adding the article in question.
- Setting up a new Snapshot Folder
- Validated all the settings and configurations
I'm hesitant to reinitialize a subscriber since I am not confident a snapshot can be generated. Also wondering if this is related to the SP3 Upgrade, every few months new articles are added to the publication and this is the first time since the upgrade to SP3 that it has been done.
View 0 Replies
View Related
Jan 22, 2015
I do not understand why I have this issue.
SQL 2012 SP2, Transactional Replication.
I have added a new table to a database (existing publication) using T-SQL, I then opened up publisher properties, and ticked the new table/article so that it would be added to the subscriber. It did not show up.
I did not use a snapshot to initialize the subscription.
Immediate Synch is 0.
allow_anonymous is 0.
I mark the subscription to be reinitialized. When I start the snapshot agent I get '0% A snapshot was not generated because no subscriptions needed initialization'.
What could I be doing wrong, or missed out? Do I need to drop and recreate the subscription to get the article to show up?
View 0 Replies
View Related
Sep 17, 2007
Hi!
I want to add a word to a value if the value already exists in that field. How to do this? Please help me. In detail, i have 'id', 'name' and 'info' three columns in one Data Table. When I inserted one value to id field, if the value already exists it should add a word to that value and it should get inserted. Please help me to do this?
Thanks in advance!
View 5 Replies
View Related
Jan 13, 2005
I want to add a computed field to an existing SQL table:
where Field1 is >0 and field2 is not null
set newfield = 'Y'
else set newfield = 'N'
I want to keep this existing table because I'm using it as the basis for an Access Report that is nearly complete.
BTW this table is the result of a DTS package that is comprised of several SQL executables so I need to be able to repeat this as part of a larger process.
Thanks!
sgreene
View 2 Replies
View Related
Apr 26, 2008
Hi Friends,
I have a existing table named as activity, and have the column like ID,Description. I want to add the Identity for the ID column using script only.. Have any ideas how to do in sql query analyser?
Thanks in Advance
View 7 Replies
View Related
Sep 17, 2007
Hi!
I want to add a word to a value if the value already exists in that field. How to do this? Please help me. In detail, i have 'id', 'name' and 'info' three columns in one Data Table. When I inserted one value to id field, if the value already exists it should add a word to that value and it should get inserted. Please help me to do this?
Thanks in advance!
View 18 Replies
View Related
Dec 18, 2007
how do i add columns to an existing table?
View 1 Replies
View Related
Oct 18, 2007
Dear Friends,
what is best and quicker way to add 500 columns to existing table having 145 columns already.
Is there any way to avoid manual work of adding columns one by one in design mode or using script.
I have a TXT file (comma delimited) that contains all those columns names as a first row,but I am not sure if i can use DTS package to create table design having such sourcre TXT file.
Any advice?
Thanks,
View 1 Replies
View Related
Mar 13, 2008
Hello,
We currently have a 2 node Active/Passive 2 named instance SQL 2000 cluster. We will be chaning the configuration to Active/Active, basically moving 1 instance to the passive node (so we can take advantage of the resources on the passive node).
We would also like to add 3 nodes to the cluster making it a 5 node SQL cluster. What we are thinking of doing is basically making it an Active/Active/Active/Active with the 5th server being passive. The question I have is will I be able to add and install the 3 new nodes without having to redo the SQL cluster? Should I install the two new active nodes with the default SQL instace or do I have to install SQL with named instances? (actually I think the named instances is the way to go but then I wouldn't be posting here if I was sure about the answer).
Thx!
-Albert-
View 2 Replies
View Related
Mar 9, 2000
I cannot figure out how to add a default constraint to an existing column. The syntax I'm using is :
ALTER TABLE table_name WITH NOCHECK
ADD CONSTRAINT column_name DEFAULT (0)
This gives me a syntax error.
The column was originally added with a default constraint of 1 to a 2.6 million row table.
I dropped the existing constraint and need to add the new default constraint of 0 for that column.
Anyone have any ideas? Thanks in advance.
View 2 Replies
View Related
Dec 5, 2005
Sorry I'm pretty new to SQL so I don't know if this is a simple question. I have a table, and I am trying to add a column to the table and populate this column using what would be called an 'IF' function in Excel.
Basically 'column A' has numbers in it. I want SQL to look at 'column A' and if the first 5 digits of the number in 'column A' are 00001, then put 'description A' into new column 'column B'. If the first 5 digits of the number in 'column A' are 00002, then put 'description B' into 'column A' etc.
Any ideas?
View 2 Replies
View Related
Jan 21, 2014
I want to add new primary key into existing table which already has a primary key. But,I do not want to remove the old primary key, since there are many records and the old primary key also have relationship with other table
When I am using this query:
alter table hem154
add indexNO uniqueidentifier default newid()
alter table hem154
add CONSTRAINT pk_hem154_indexNo PRIMARY KEY (PK_indexNO)
go
Note:
Hem154 ~ Table name
indexNo ~ Column Name
I get this runtime error:
Msg 1779, Level 16, State 0, Line 1
Table 'hem154' already has a primary key defined on it.
Msg 1750, Level 16, State 0, Line 1
Could not create constraint. See previous errors.
View 4 Replies
View Related
Apr 3, 2008
I was asked to add an additional column to an existing query. I'm using Microsoft Query with a MS SQL 2000 server, and don't have much knowledge of SQL in general. Here's the existing query:
SELECT A.COMPANYCODE,
A.INVOICENUMBER,
A.LINENUMBER,
A.SONUMBER,
A.CUSTOMERCODE,
A.SHIPPERNUMBER,
A.INVOICEDATE,
A.ITEMCODE,
A.QUANTITYINVOICED,
A.UNITPRICE AS 'InvPrice',
A.QUANTITYINVOICED * A.UNITPRICE AS 'ExtInvPrice',
INVENTORY.UNITPRICE AS 'StdPrice',
INVENTORY.STANDARDCOST,
A.QUANTITYINVOICED * INVENTORY.STANDARDCOST AS 'ExtCost',
(A.QUANTITYINVOICED * A.UNITPRICE) - (A.QUANTITYINVOICED * INVENTORY.STANDARDCOST) AS 'GM$',
(INVENTORY.UNITPRICE - A.UNITPRICE) * -1 AS 'PriceListDiff'
FROM ABW.DBO.SALESANALYSISHISTORY A,
ABW.DBO.INVENTORY INVENTORY
WHERE INVENTORY.COMPANYCODE = A.COMPANYCODE
AND INVENTORY.ITEMCODE = A.ITEMCODE
AND ((A.COMPANYCODE = 'csp')
AND (A.QUANTITYINVOICED <>$ 0)
AND (A.INVOICEDATE BETWEEN '03/1/08' AND '03/31/08'))
ORDER BY A.INVOICEDATE,
A.ITEMCODE
They want a column added to the current query where if A.Unitprice is greater than or equal to Inventory.UnitPrice then populate the column with A.QuantityInvoiced*A.UnitPrice. I posted on another forum, and the advice I got was to add this:
SELECT NewColumn = CASE
WHEN A.Unitprice >= Inventory.UnitPrice THEN A.QuantityInvoiced * A.Unitprice
ELSE 'null'
END,
FROM ABW.DBO.SALESANALYSISHISTORY A,
ABW.DBO.INVENTORY INVENTORY
I'm not sure how to integrate it to the current query, so I've tried running it by itself, and I get the error: Didn't expect 'A' after the SELECT column list.
Any help would be greatly appreciated to modify the current query to display the new column.
View 2 Replies
View Related
Mar 13, 2008
Is it possible to add new data to an existing report. I already updated the SQL query, but the new data does not appear within the report. How can I modify the rows, columns and data fields???
Thanks in advance!
View 5 Replies
View Related
Sep 11, 2006
I removed all constraints in order to load a bunch of data into a table, now I'm wondering if I can add an identity column to this table which does contain data or if I have to create a new table with the identity column and insert the data into that.
thx
Kat
View 8 Replies
View Related
