I ran the Advanced cluster preparation for a new sql instance on an existing cluster.
Slq Server 2012.
After is completed, it was successful, I realized I specified the wrong Instance Root directory.
Is it possible to remove what the preparation installed? Or is it possible to change the root directory?
We have a SQL 2008 Instance existing on active/passive cluster with 2 nodes running on Windows server 2008 R2 Ent. Edn.
Now we need to install another SQL instance on this cluster. So what are the prerequisites apart from new IP address? Do we need shared disks or can the existing disks can be utilized?
We have an existing SQL Server 2012 Enterprise cluster with 2 nodes (active-active) and uses Windows 2008 R2 OS. We are looking for a way to increase HA as well as offload backups to secondary server and it was suggested that AlwayOn could be an option.
The questions I have are:
1) Is it possible to turn on AalwaysOn feature on an existing cluster?
2) If yes to above, does the secondary replica need to exist as a node on the same cluster or can it be on a completely different cluster?
3) If the secondary replica is on the same cluster (i.e. we add a 3rd node to existing 2 node cluster), can that node be provisioned with storage from a completely different SAN? (i.e. Node 1 and Node 2 accesses LUNs on SAN1 and Node 3 accesses LUNs on SAN2).
We have an active/active two-node QA cluster with four instances of sql. I need to add a fifth. In the past I always moved existing instances to the other node while installing a new instance.
Other than impacts to users from install reboots, is that a hard requirement?
QA is reluctant to have me put the four existing instances on one node for most of a day, fearing big performance slowdowns. Each node has 250GB of memory and each instance is allowed 50GB. Netapp disk backend.
I am new to SQL Server 2012 clustering.I added a new instance to one of the two nodes.when I try to move it to the other node it fails.Do I need to install it on both?If so, what options do you install on the second node?
View 7 Replies View RelatedI´ve been reading that SQL Server 2012 Always On is dependent on having a Windows Failover Cluster setup. Is that correct ?
View 6 Replies View RelatedIn QA we have a two-node cluster with four instances of sql. In trying to add a fifth, I was given an IP address already in use so the install hung.
I removed it from the cluster but it is still there in the registry etc on the node I was working on.
I read about using the maintenance tab of the sql server install to "remove a node" but the terminology is confusing. To me a node is a physical server and an instance is an instance of sql server -- not the same at all but they are often referred to as the same thing.
I definitely don't want to remove one of the servers from the cluster.
I am trying to install the MS SQL Server 2012 Failover Cluster on Windows Server 2012 . I successfully Installed the Failover cluster instance on my primary node.
But when I am running the installation process on passive node to add node in the failover cluster I am stuck with very unique kind of issue.
I am following the Standard process of Installation and I am getting the same windows for each next process, but after License Agreement window when I get the Cluster Node Configuration window, then in "SQL Server Instance Name" drop down box I am not getting the Name of Instance which is already installed on the primary node. But this Instance complete information is appearing in below given box.
Only issue is Instance name is not appearing in the drop down list, that's why I am not able to select and when I click on next it trough error and do not proceed.
I have a 2 part question about adding a new 'named' Virtual Server to an existing Clustered SQL Server 2000 install.
I have a 2 node MSCS Cluster (WIN2K advanced Server sp4) with a default SQL Server instance. This has been in production and working fine. I created a new Cluster resource and reran SQL Server 2000 ENT setup and added a second Virtual SQL Server (named instance). After many problems, finally got the second Server installed. Now I have 2 SQL Server instances in the Cluster - from what I understand, you can have up to 16, each seperate installs with seperate Cluster resources.
Thus the problem:
For the Second Instance, I have specific instructions from the Applications vendor on how to install SQL Server to work with their APP. I need install SQL Server WITHOUT the Full Text Search component and WITH a specific Server Collation (Binary order for use with the 850 Multilingual character set). (I have done this same setup on standalone SQL Server installations for this APP and they have gone smooth).
When I installed the new Virtual 'named' instance in my Cluster, I Could NOT 'DESELECT' Full Text Search when I choose Custom install.. it does not appear as an option???
Also, I chose the "Binary order for use with the 850 Multilingual character set" during the installation, but that is not the Server Collation that is installed...
I have already installed SP3 for SQL Server against the Virtual Server on this Cluster, as well as a HotFix... and Now I'm thinking I need to rerun the SQL Server installation, uninstall the second server and reinstall to see if I can fix the 'Collation problem' .. but I'm not sure if this is the right course of action.
Does anyone know why I cannot 'deselect' Full text search component at install, and any ideas why it did not install with the SQL Server Collation that I specified at install????
Hello,
We currently have a 2 node Active/Passive 2 named instance SQL 2000 cluster. We will be chaning the configuration to Active/Active, basically moving 1 instance to the passive node (so we can take advantage of the resources on the passive node).
We would also like to add 3 nodes to the cluster making it a 5 node SQL cluster. What we are thinking of doing is basically making it an Active/Active/Active/Active with the 5th server being passive. The question I have is will I be able to add and install the 3 new nodes without having to redo the SQL cluster? Should I install the two new active nodes with the default SQL instace or do I have to install SQL with named instances? (actually I think the named instances is the way to go but then I wouldn't be posting here if I was sure about the answer).
Thx!
-Albert-
We have set up SQL Server 2005 failover cluster with 2 nodes, on Windows 2003. I'm now trying to add Reporting Services. I don't see any documentation for how to do this. Is it similar to adding Analysis Services? If I use this command I'm not sure what to put in several paramaters:
start /wait c:<path-to-setup>setup.exe /qn VS=<my-virtual-server-name> INSTALL=RS_Server INSTANCENAME=MSSQLSERVER ADDLOCAL=RS_Server ADDNODE=n GROUP="Cluster Group" IP="111.11.11.11,<my-virtual-server-name" ADMINPASSWORD=xxxx SAPWD=xxxx INSTALLSQLDIR=c INSTALLSQLDATADIR=c RSACCOUNT=mmmxxxxx RSPASSWORD=<domain-user-psswd> SQLBROWSERACCOUNT=<mmmxxxxx> SQLBROWSERPASSWORD=<domain-user-psswd> SQLREPORTING=1
My question are for:
IP: do i just put the virtual ip and name here, or every ip in the node?
INSTALLSQLDIR: is c drive correct here, or what is this?
INSTALLSQLDATADIR: is c drive correct here, or what is this?
RSACCOUNT: is this correct, not in the example in document ms144259 and what should go here?
RSPASSWORD: same as above
SQLBROWSERACCOUNT: what goes here?
SQLBROWSERPASSWORD: same as above
Thanks so much for any help.
I have installed a SQL Server cluster recently.Noticed below errors logged in the error log. I understand that SPN is not getting registered, hence this error.What permissions SQL Server service account? Service account is admin in local nodes anyway.
"SQL Server is attempting to register a Service Principal Name (SPN) for the SQL Server service. Kerberos authentication will not be possible until a SPN is registered for the SQL Server service.
This is an informational message. No user action is required.SSPI handshake failed with error code 0x8009030c, state 14 while establishing a connection with integrated security; the connection has been closed. Reason: AcceptSecurityContext failed. The Windows error code indicates the cause of failure. The logon atte
2015-06-12 18:11:06.970 Logon Error: 18452, Severity: 14, State: 1.
2015-06-12 18:11:06.970 Logon Login failed. The login is from an untrusted domain and cannot be used with Windows authentication "
Hi all
SQL Server 2005 cluster. Active-Active. We want to create two instances. The two nodes are named:
mike-940-01
mike-940-02
I read somewhere that there can only be ONE default instance in a 2005 cluster. So I interpret that as meaning that I can only have one instance named after a virtual server (example: mike-940-03) and the other instance has to be a slashed instance (example: mike-940-03/instance1). But what if I create another virtual server (example: mike-940-04). Can I install a default instance in that server? Can someone help me clarify this?
Also, if I'm using all slashed instance names, then what does it choose as the base name before the slash? In other words, what decides which virtual server name is used? Is it the management node? Is it one of the nodes?
My objective is to keep consistency in the naming on the cluster. If I have to use slashed instances, then I want all sql server instances to have a slash.
Sorry about the confusing explanation, but that's probably a symptom of MY confusion.
Thanks!
Hi There
If i have a 2 node cluster running a single instance (default) and i want to add another instance to the cluster , can i install the second instance as a defualt instance ?
Since the cluster instances are referred to their virtual names/ip's and if i choose to intall the binaries of the second instance to a different location is this possible?
Since in theory you never have 2 default instances running on a single server but each within a virtual server?
Normally i install a named instance but do i have to ?
Thanx
During the installation of Adding node to a SQL Server failover cluster(On passive node) getting error like.. The MOF compiler could not connect with the WMI server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI server to start.We run the below commands but didn’t get any resolution & got the same above error .
1<sup>st</sup> Method…
1. Open console command (Run->CMD with administrator privileges).
2. net stop winmgmt
3. Rename folder %windir%System32WbemRepository to other one, for backup purposes (for example _Repository).
4. net start winmgmt
2<sup>nd</sup> Method..
1. Disable and stop the WMI service.
a) Command : - sc config winmgmt start= disabled
b. Command : - net stop winmgmt
2. Run the following commands.
a). Command: Winmgmt /salvagerepository %windir%System32wbem
b). Command: Winmgmt /resetrepository %windir%System32wbem
3. Re-enable the WMI service
Command: sc config winmgmt start= auto
Last command to run after above steps
4. Command: mofcomp "%programfiles(x86)%Microsoft SQL Server100Sharedsqlmgmproviderxpsp2up.mof"
File not found Error for above command.
I am in the process of moving databases from a SQL 2005 Standard version to a 2-node 2014 cluster.All of my 2005 databases back up successfully.They all restore without issue except for one database that has a full text catalog. I get this message
Msg 7610, Level 16, State 1, Line 2
Access is denied to "fileStoragedataMSSQLSERVERFullTextCatalog", or the path is invalid.
Msg 3156, Level 16, State 50, Line 2
File 'sysft_FTCatalog' cannot be restored to 'fileStoragedataMSSQLSERVERFullTextCatalog'. Use WITH MOVE to identify a valid location for the file.
Msg 3119, Level 16, State 1, Line 2
Problems were identified while planning for the RESTORE statement. Previous messages provide details.
Msg 3013, Level 16, State 1, Line 2
RESTORE DATABASE is terminating abnormally.
[code]....
I went as far as giving the folder full access to everyone temporarily and received the same error.
Can I build a cluster by adding the cluster service, then the SQL instances, then add the other nodes and their passive SQL instances?I would lean to building the cluster first, the add the SQL instances.
View 4 Replies View RelatedHi There
I have found no real documentation on this, so any links would be greatly appreciated.
We have an existing 2 node active active cluster.
A default and and named instance SS2005 Enterprise Edition are installed on the cluster.
Recently we acquired new hardware, 2 servers, which we added to the cluster so we now have a 4 node cluster.
The 2 new nodes have OS etc installed.
Now i have installed sql on a new multi node cluster, i have upgraded sql server in an existing cluster BUT i have never installed sql on an existing cluster for new nodes for multiple instances.
Now i presume you simply run the install on one of the new nodes, do this for a default instance, selecting both 2 new nodes to installl on. And do this again for the named instance.
But in the past I have never been promoted for which nodes to install sql on, it simply does all the nodes BUT i do not want this.
And how will the cluster know where the binary files are for each instance on the new nodes?
In a nutshell, how do i install sql server 2005 for 2 new nodes in an existing 4 node cluster for multiple instances ?
Thanx
Hi,
I am having an existing sql 2005 cluster on an active passive cluster. I need to add analysis service to this as a new component. I am having enough space available in the cluster disks. Following are my queries,
1) do i need a new virtual ip and virtual server name for the analysis services ?
2) do i need a seperate cluster resource group for analysis services with an additional disk added ?
Regards
Nimesh
Hi all,
Newbi to sql clustering.
I have a sql server 2005 standard edition with Active/Passive Cluster in production.
I have a new requirement where i need to create a new instance on this active/passive cluster that can be used by our sharepoint servers. Can somebody please let me know what are the steps that i need to follow like
1.What i need to ask my network admin?
2.How i need to proceed installing?
I am planing to do this over the weekend where i have the liberty of some down time.
Any help greatly appreciated
Thanks
I am looking for a best practice or any suugestion on the best way to install an additional Sql 2005 instance in a cluster environment. We have a production environment that is active/active/passive and need to install an additional instance with a little impact to the current production instances as possible. Ant suggestions or articles I can review?
View 1 Replies View RelatedI have a SQL 2008 R2 2 node cluster. For DR testing, I need to restore an instance on a new server (completely isolated). The existing instance runs on what I would call an alias. The actual cluster host name is SQLPROD (cluster nodes are SQL01 and SQL02). The instance runs on server SQLPROD-APPLE. The instance is called APPLE. In production, I use SQL Management Studio and I connect to SQLPROD-APPLEAPPLE.
I've setup a new VM to run SQL. Not a cluster. Host name is SQLREC. The new Vm has all the IP addresses that were on the cluster and the DNS for all the aliases are correct. I've installed instance APPLE. I created an alias called SQLPROD-APPLE. When I try to open SQL Management Studio and connect, I can't connect to SQLPROD-APPLEAPPLE. I can connect to localhostAPPLE, SQLRECAPPLE, 192.168.168.50APPLE.
When I attempt to connect to the alias I get error 18452. Pinging the alias resolves correctly. I haven't gotten to the database restore yet, so that's not a concern. I'm just trying to validate the connection first with the correct server and instance names.
I'm using Windows Authentication.
I have following script which i am planning to run to drop all non-clustered primary keys on a database and then created as clustered. I am using someone else's script so don't know how to modify this. Some of primary key columns are used in references in other tables.
is there anyway i can drop the existing primary keys and using their original script then create again as clustered including restoring all foreign and reference keys and unique or no unique.
DECLARE @table NVARCHAR(512), @tablename NVARCHAR(512),
@sql NVARCHAR(MAX), @sql2 NVARCHAR(MAX), @sql3 NVARCHAR(MAX),
@column NVARCHAR(MAX);
DECLARE @indexname NVARCHAR(512);
SELECT name As 'Table'
[Code] ....
can we join a node in a windows cluster which is already in a different cluster?
We have this requirement as we need to setup readable secondary ( always on AG) on the third node.
We are planning to change all IPs of PRODUCTION Failover Cluster Setup. In my cluster setup ... we have 2 Physical Nodes with windows-2008, Roles are MSDTC and SQL-2008R2.
IP change for:
1. Both Nodes(Physical)
2. MSDTC
3. SQL Server
4. windows Cluster
So Almost... All IPs are going to change.
Im DBA here, I need to take care of SQL cluster and MSDTC. But I haven't performed this activity before.So I'm worrying about Impacts and consequences of this change. steps how should I perform this activity.
Current set-up: three node cluster running Windows Server 2003 Enterprise Edition SP2 with two instances of SQL Server 2005 Standard Edition SP2.
Virtual node 1: Standard Edition, default instance, Database Engine only
Virtual node 2: Standard Edition, named instance, Database Engine, Analysis Services and Integration Services
Physical node A: Prefered node for virtual node 1
Physical node B: Failover node for both virtual node 1 and 2 (thus having two installations of Standard Edition)
Physical node C: Prefered node for virtual node 2
We started off with this set-up because there was no need for Enterprise features, and SQL 2005 supports failover clustering with two nodes in Standard Edition. Saved a bundle of cash, so everybody's happy. Now we need to run a solution on virtual node 2 that requires Enterprise features in Analysis and Integration Services, so an edition upgrade is required on virtual node 2. I have done some research and found several edition upgrade examples, but none that match the above scenario. We are running production on these machines, so I can't risk experimenting with command line options, I have to be right the first time.
Is it possible to mix two editions of SQL Server 2005 in one cluster? Can I upgrade virtual node 2 to Enterprise but leave virtual node 1 at Standard? What procedure do I have to follow to upgrade all three components of virtual node 2 to Enterprise Edition on both physical node B and C?
Any ideas will be greatly appreciated.
I understand most of the concepts for the Active/active setup. I am setting up a 2 node cluster. My question is can I use the default instance name (one default instance name per group) when setting up each instance or do I have to use named instances . I am assuming that since each group is a virtual machine that I can get away with using the default instance, but I cant find any documentation to confirm my frequently wrong perceptions.
I want to set it up like this
Instance1 Group
Group resources
Default SQL Instance Name Installation
Preferred Owner Node1
Instance2 Group
Group resources
Default SQL Instance Name Installation
Preferred Owner Node2
Thanks
Hi,
I am trying to remotely connect to a SQL 2005 Instance on a cluster. I see the following error:
No retry on exception System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
I have enabled TCP/IP , Named Pipes on the node. I have turned off IPSec on the clients as well. I am using the following connection string : "Integrated Security=SSPI;server=servernameinstancename;Pooling=false;database=TrialDB"
Is there something I am missing?
Any pointers will be appreiciated.
thanks.
This is a fresh install of SQL Server 2005 (64bit) on a Windows 2003 R2 SP2 64bit OS. The Cluster has been built and SQL 2005 has been installed (Database Engine(clustered), Analysis Server(clustered), Notification Server, Integration Server, Reporting Services). SQL 2005 SP2 has been installed.
Now, I want to install Notification Server, Integration Server and Reporting Services on the second node for high availability.
When I select 'Install New Components' from Add/Remove Programs, the System Configuation Checker tells me theres a version difference and to:
To change an existing instance of Microsoft SQL Server 2005 to a different edition of SQL Server 2005, you must run SQL Server 2005 Setup from the command prompt and include the SKUUPGRADE=1 parameter.
I'm using the same binaries as the original install. Could this be a result of installing SQL 2005 SP2?
Can someone help me out with this. I'd prefer using the setup interface instead of a command line script.
I have DBA that is convinced that they need domain admin rights to install SQL 2005 into an existing cluster. The domain groups and service accounts for SQL have been created already. Is having domain admin rights required during the install of SQL 2005 in a cluster?
View 1 Replies View RelatedI have a system running a sql 2000 instance w/ multiple databases located in a SAN. I would like to cluster my SQL 2000 environment on the same system. Can I do this without reinstalling another database instance? Can I put my current default instance and put it to my virtual server instance? Help is really appreciated. Any tips and links can be helpful to me.
View 3 Replies View RelatedHello,
I install Cluster naming instance of MSSQL 2005 Enterprise edition with SP2 and latest patch.
When I try connecting this instance from outside of the server by "server nameinstance name" I got connection error.
But when I connecting by "server name,port number" it's connecting with no problem.
Can someone help me resolve connection outside of the server with "server nameinstance name"?
Thanks
Having problems running the BPA for 2012. We setup using a clustered environment, SQL Server installed using default instance, and a static port not 1433. When I try to run the BPA using the instance name it says it doesn't exist, and won't let me add a port number. However, if I use MSSQLSERVER as the instance name it runs with no port specified and returns results. I assume that it doesn't require a port because the default instance would pull from the Browser Service and the using MSSQLSERVER is the same as running the default on a standalone server. Are those assumptions correct?
View 2 Replies View Related