SQL 2012 :: AlwaysOn Pending Changes
Aug 18, 2014How to find the pending transactions to be applied on secondary in Always On? Can i get those details from dashboard?
View 2 Replies
ADVERTISEMENT
SQL 2012 :: Moving DB Data / Log Files Within AlwaysOn Causing (Recovery Pending)
Jan 9, 2015I'm trying to move a log file of a database that is part of an availability group. I have been following steps from the article: [URL]
At first this worked fine for me in a test environment. When I tried it in a production environment the database on the secondary went into "Recovery Pending" state and I can't get it out.
I checked to ensure that the dB is looking in the right place for the log file, and it is. It just doesn't seem to actually use the new file. If I start and stop SQL service, the dB comes back up and is fine.
Here are the steps I'm going through and what is happening at each step:
--------------------------------------
:Connect DEVSQL --This is currently PRIMARY
USE[master]
GO
ALTER AVAILABILITY GROUP [DP-AG-DEV] MODIFY REPLICA ON N'DEVSQL' WITH (SECONDARY_ROLE(ALLOW_CONNECTIONS = NO))
[Code] ....
All is good so far. Both the Primary and the Secondard have had their logical files changed, which has not taken affect yet because there has been no failover.
--Make SQL10 the PRIMARY
:Connect SQL10
ALTER AVAILABILITY GROUP [DP-AG-DEV] FAILOVER;
GO
SQL10 is now the Primary for this AG. And, as expected, the database [AG-Test] is in "Recovery Pending" because it is now looking for the log file in the new location. I need to move the file to the new location.
:Connect DEVSQL
--Enable XP_CMDSHELL
sp_configure 'show advanced options',1
go
reconfigure
go
sp_configure 'xp_cmdshell',1
[code].....
This is where the script is failing, returning the error:
Msg 1468, Level 16, State 5, Line 5
The operation cannot be performed on database "AG-Test" because it is involved in a database mirroring session or an availability group. Some operations are not allowed on a database that is participating in a database mirroring session or in an availability group.
Msg 5069, Level 16, State 1, Line 5
ALTER DATABASE statement failed.
I can not get the dB to recognize the log file at it's new location.
If I restart the SQL Service, it comes back fine, which seems to indicate to me that it is not a permission problem and confirms that the file is in the right place.
How do I force SQL to look for the log file again without restarting the service?
SQL 2012 :: Updatable Subscription - View Pending Log From Subscriber To Publisher
May 7, 2015I have setup Transnational replication with updatable subscription.
There were around 7000 rows update at subscriber from one query which was executed at subscriber side.
But this update has not taken place at publisher yet and so to other subscribers.
Is there any way i can monitor pending log or where is the issue?
I find so many ways to see pending logs or statistics for - "Publisher to Subscriber" but not for "subscriber to publisher"
What is the way to see subscriber to publisher pending and issues?
DB Engine :: 2012 Database Stuck In Recovery Pending Status?
Jan 12, 2013I have a SQL cluster which ran out of disk the other day. I threw plenty more disk at the SAN. However, 1 of the databases came back with Recovery Pending and has been over 24 hours. I have tried to backup the database with no success. I don't have a clean backup from the day it occured so would have a good amount of work missing.
Running a dbcc check returns the following:
Msg 945, Level 14, State 2, Line 1
Database 'sqldb' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details.
I have not tried a dbcc check with REPAIR_ALLOW_DATA_LOSS as there seems to be a high risk of losing whatever was going on. how I can get the db back online?
SQL 2012 :: Restart Computer Prompt - Pending File Rename Operations Does Not Exist
Jul 21, 2014I am attempting to install SQL Server Express 2012. Th setup support rule to "restart computer" continues to fail.
I tried to locate and change PendingFileRenameOperations under HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSession Manager.
I am not able to locate PendingFileRenameOperations both when following the registry path and even searching at the HKEY levels.
SQL 2012 :: AlwaysOn A/G Across Two Clusters
Oct 22, 2014We are looking to setup an AlwaysOn A/G between two SQL instances across two SQL clusters - one cluster has two nodes the other has three nodes.
Is this possible using WSFC? Does the A/G wizard just handle this?
SQL 2012 :: Backup Setup With AlwaysOn?
May 13, 2013I'm setting up my first pair of Sql 2012 servers using AlwaysOn. I set up backups to run on the primary and I understand that you can set up backups to run on both the primary and secondary servers but the secondary will fail. Is there a way I can stop the secondary server from sending out error messages about failed backups? Is it possible to script it so that the server looks at whether it's primary or secondary and turns on or off alerts based on that?
View 8 Replies View RelatedSQL 2012 :: AlwaysOn With Clustered Disks
Mar 13, 2014I am trying to build the 2 node 2 clusters with the AlwaysOn.
Here isthe landscape.
2 nodes PROD failover cluster (running once instance)
2 nodes DR failover cluster (running 2 instances - DR and PRE-PROD)
Both clusters are in different geographies.
PRE-PROD can be editable. So out of scope of Always On.
One instance on PROD -> DR of the other box. [Want to achive thru AlwaysON]
Now my Question:
1) Do i need to have all the 4 nodes in same failover cluster group? If yes, then this would become MultiSubnet cluster Or Is there any way those 2 diffrerent failover clusters (one DR and one PROD) can be part of AlwaysOn.
2) Can i use the clustered disks as in the above landscape for always on?
SQL 2012 :: Creating 2 AlwaysOn Clusters For 1 App
Apr 11, 2014We have 2 SQL 2012 servers. Our application has 2 databases. We are creating an AlwaysOn cluster. Is it good to create 2 AlwaysOn clusters to have 1 database primary on one of the servers and the other database primary on the other server?
I have been asked if it is possible to have one database running on one server and the other database on the other server. Is this possible without creating 2 separate AlwaysOn clusters?
SQL 2012 :: AlwaysOn Two Secondary Replicas
Apr 14, 2014While configuring SQL Server 2012 Cluster with Always on, why do we need two secondary replicas.
The attached link will describe the actual query. [URL] ....
SQL 2012 :: AlwaysON Setting Up A C Node?
Apr 28, 2014I have an A & B node set up and running. I now want to add a C NODE.
The catch is the C NODE is in a SQL Cluster Environment.
I am guessing I add the Virtual Name of the C node to the current Always ON Cluster?
I tried adding it...the error message says" the Virtual Node is really the A node and to add the A NODE"?
SQL 2012 :: What Are Differences Between AlwaysOn And Clustering
Apr 24, 2015What are differences between always on and SQL Server Clustering
View 1 Replies View RelatedSQL 2012 :: Setting Log Shipping In AlwaysOn Environment
Jan 23, 2013We have 4 Servers which have SQL SERVER 2012 and "AlwaysOn" have been enabled on all 4 servers:
Server1,Server2,Server3,Server4
Server1 is the Primary node and thr rest are secondaries. There is a Sync relation between Server1 and Server2 and also there is aSync relation between Server1 and Server3 & Server4.
Is it possible to setup log shipping from Server2 & Server3(secondaries) to two new servers?
SQL 2012 :: AlwaysON Availability Groups And Listeners
Feb 13, 2014I have four instances and each instance have its own Availability Group with its own listener.
Would like to know if you can have one listener for multiple Availability groups?
SQL 2012 :: Maximum Cluster Nodes In AlwaysOn
Mar 17, 2014How many nodes can you have in a cluster with SQL 2012 alwaysOn.
I understand that availability groups are limited to 5 nodes but if you had a 10 node cluster and decided to create multiple availability groups using various nodes within the 10 nodes but never exceeding 5, is that possible?
Or is there a counter or some validation from SQL AlwaysOn that actually hard limits to a grand total of 5 nodes in a cluster?
SQL 2012 :: Renaming AlwaysOn Availability Groups?
Apr 28, 2014We had 3 Availability Groups set up in SQL 2012 last year but they were poorly named so I am just looking to rename them but there doesn't seem to be any command for it that I can find.Can they not be renamed once created? I guess I could just create new ones and move the DB's into them but just thought I would check!
View 1 Replies View RelatedSQL 2012 :: AlwaysOn Read Only On 2nd Instance Server
Jul 18, 2014Considering trying to move 2008 acitve/passive cluster with log ship to day old read only 2008 server to 2012 active/passive to 2012 AG Read only server. Only problem is that read only instance may have to be a 2nd instance on a server. The new box is a beast 64 core 256 gig of RAM hp so this is no dog. So I have these choices
migrate 2008 active/passive cluster to 2012 active passive (this will be it's own ordeal)take new monster box and build two instances, one that will run the AG read only database, the other will house reporitng services and analysis services and a few dw databases. We are not heavy into deep dive analysis services yet kind of in it's infancy. Not sure if this other instance will be sql 2008R2 , may be able to do 2012. MY also have a few small sharepoint databases but they barely use it.
SQL 2012 :: AlwaysOn - Readable Secondary Option
Aug 21, 2014In always on under availability group server name properties can see the option Readable Secondary. In that for secondary server the Readable Secondary Option is YES and for Primary it is Read-Intent. I believe Read-Intent allows only read only connections and YES allows all user connections.
View 0 Replies View RelatedSQL 2012 :: AlwaysOn - Readable Secondary Options
Aug 21, 2014In always on under availability group server name properties can see the option Readable Secondary. In that for secondary server the Readable Secondary Option is YES and for Primary it is Read-Intent. I believe Read-Intent allows only read only connections and YES allows all user connections.
What exactly it means for the primary and secondary?
SQL 2012 :: AlwaysOn AG Replicating Much Slower Than Mirroring
Sep 30, 2014I'm setting up AG replication over our WAN (1GB MPLS). Using sql stress, AG replication quickly falls behind. Network throughput plateaus at ~14Mbs.
The problem ISN'T NETWORK
using conventional mirroring, the same workload never falls behind, throughput plateaus at ~26Mbs.
it's almost like log stream compression isn't happening for AG...
both mirroring and AG are using async.
SQL 2012 :: Make AlwaysOn Over Normal Cluster
Nov 13, 2014Can we make SQL 2012 Always ON over the normal SQL Cluster 2012.
View 3 Replies View RelatedSQL 2012 :: AlwaysOn Failover Due To Missed Heartbeats
Dec 10, 2014I have setup SQL AlwaysOn between primary and DR data centers. Here is the setup:
Primary data center: Server1 (Primary), Server2 (Sync Commit Secondary), Server3 (ASync Commit Secondary)
DR data center: Server4 (ASync Commit Secondary)
Data synchronization and manual failover works fine. But, sometimes, the AlwaysOn cluster automatically fails over to Sync Commit Secondary on Primary data center. Here is the error message from Failover Cluster Manager->Cluster Events:
"Cluster has missed two consecutive heartbeats for the local endpoint xx.xx.xx.yy:~3343~ connected to remote endpoint xx.xx.xx.zz:~3343~"
"Cluster has lost the UDP connection from local endpoint xx.xx.xx.yy:~3343~ connected to remote endpoint xx.xx.xx.zz:~3343~"
I had our network engineer check all connections multiple times and he confirmed everything is fine. But he was also able to confirm (using monitoring tools) that right at the time of a failover, there is almost 2GB worth of traffic going from Primary Server to DR server. That happens every time. I had checked the times of all failovers and there is no job or process occuring that will produce 2GB worth of data. Also, this happens regardless of which server is primary.
Even though the failover works fine, this unexpected automatic failover due to missed heartbeats are occurring often (2-3 times a month).
Here is the list of errors from the Cluster Validation Report:
Under Network Section, I see the following error messages in Red:
Validate Network Communication
Network interfaces Server4 (DR) - SAN_Team and Server1 (Primary) - SAN_Team - VLAN 20 are on the same cluster network, yet address xx.xx.xx.pp is not reachable from xx.xx.xx.yy using UDP on port 3343.
Network interfaces Server4 (DR) - SAN_Team and Server2 (Secondary) - SAN_Team - VLAN 20 are on the same cluster network, yet address xx.xx.xx.qq is not reachable from xx.xx.xx.yy using UDP on port 3343.
[Code] ....
SQL 2012 :: AlwaysON Linked Servers Failover
Jan 27, 2015So I have 2 servers S1 & S2.
Database Group 1 = L1 with Primary S1 and Secondary S2
Database Group 2 = L2 with Primary S2 and Secondary S1
For 99% of the time the 2 groups of databases are not related. For the 1 procedure that does move data from L1 to L2 something like
Update L2.DB.Owner.Table
set flag = 1
Whare a = 0
On S1 I have a linkedServer with connection to L2.
If I have a failover I cannot have L2 on S2 as they are essentially the same server.
How to I use the 2 groups hand in hand.
SQL 2012 :: Log Management Of Primary Database In AlwaysOn?
Mar 1, 2015In always on docs in msdn they mention only about backup of secondary.. explain the backup of primary or how logs are managed in primary database. My doubt is a normal database in full recovery mode the log file will grow if we didnt take proper log backup,how the same is managed in primary in Always On.
View 2 Replies View RelatedSQL 2012 :: AlwaysOn Database Not Synchronizing / Suspect
Mar 2, 2015We have a database in an AlwaysOn Availability Group that has gone into a state of Not Synchronizing / Suspect on the secondary.
The reason why this happened is because the secondary ran out of disk space so the log file wasn't able to be written to. The database was set to synchronous mode.
Is the only way to recover from this to do a re-initialization or is there another way to recover?
SQL 2012 :: Advantages Over SERVER AlwaysOn Over Clustering
May 14, 2015Give the Advantages Over SQL SERVER Always on over Clustering....
View 4 Replies View RelatedSQL 2012 :: Setup AlwaysOn On Existing Cluster?
May 19, 2015We have an existing SQL Server 2012 Enterprise cluster with 2 nodes (active-active) and uses Windows 2008 R2 OS. We are looking for a way to increase HA as well as offload backups to secondary server and it was suggested that AlwayOn could be an option.
The questions I have are:
1) Is it possible to turn on AalwaysOn feature on an existing cluster?
2) If yes to above, does the secondary replica need to exist as a node on the same cluster or can it be on a completely different cluster?
3) If the secondary replica is on the same cluster (i.e. we add a 3rd node to existing 2 node cluster), can that node be provisioned with storage from a completely different SAN? (i.e. Node 1 and Node 2 accesses LUNs on SAN1 and Node 3 accesses LUNs on SAN2).
SQL 2012 :: Error At Adding Listener For AlwaysOn
Jun 11, 2015I am trying to setup an AG on a cluster, I was able to define where I want my replica, but I need to setup the ip for the listener of that one
When I am adding the Ip at the listener I am getting the following message:
The Windows Server Failover Clustering (WSFC) resource control API returned error code 5057. The WSFC service may not be running or may not be accessible in its current state, or the specified arguments are invalid. For information about this error code, see "System Error Codes" in the Windows Development documentation.
The attempt to create the network name and IP address for the listener failed. The WSFC service may not be running or may be inaccessible in its current state, or the values provided for the network name and IP address may be incorrect. Check the state of the WSFC cluster and validate the network name and IP address with the network administrator. (Microsoft SQL Server, Error: 41009)
Browsing around I found this guide: [URL] ......
And I make sure that the cluster has permissions to "Read all properties", "Create Computer Objects", even to "Create all child" permissions
I also added those permissions to the account that starts sql at that cluster and I am logged as that and I am still getting the error....
SQL 2012 :: AlwaysOn Availability Group Per Database
Jun 26, 2015We are planning to upgrade our production servers from mirroring to alwayson. Our current mirror setup gives the advantage that it can failover a single database.To have a similar setup in alwayson we are probably going to create an availability group per database. Any other disadvantage in this except for the extra initial configuration work?
View 9 Replies View RelatedSQL 2012 :: AlwaysOn Multiple AGs And Listeners In Same Instance
Jul 9, 2015Currently we have an AlwaysOn AG set up with a listener running on port 1433 (underlying instances are on a non default port). Great, no problems there.If we set up a second AG on the same instance with its own specific listener, can this new listener also be configured to use port 1433?
View 2 Replies View RelatedSQL 2012 :: Configure AlwaysOn Between Two Different Network Section?
Jul 29, 2015How to configure AlwaysOn between two different network section?
View 2 Replies View RelatedSQL 2012 :: Maintain Indexes When AlwaysON Is In Place
Aug 4, 2015I have a new cluster (2 sync, 2 async) with about 50 databases going from 1 to 200gb ( all of the objects are compressed).That at sql server 2012, sp1 CU7.I have several drives for logs with 200gb of space in there...I am having issues at rebuilding indexes on this env, ie, I have a table with the clustered index heavily fragmented (~80%), and the table has about 60gb of data, uncompressed that should be about 160gb.
The index rebuild is creating a log file big enough as to consume all the space that I have for logs, and that is only 1 table, so for sure my old process to maintain indexes (ola.hallengren code) won't work on this scenario.
SQL 2012 :: Re-index With AlwaysOn Availability Groups
Sep 15, 2015We have multiple SQL 2012 SQL servers setup in an alwaysOn availability groups. Where should we schedule the re-index? We have Server1 as the primary and 2 secondaries Server2 and Server3. Are their any tricks to have it run on which ever one is the primary?
View 1 Replies View Related