SQL 2012 :: Backup On Primary Replica In Case Of Secondary Replica Is Down
Jun 9, 2014
I have 2 SQL Server replicas configured on SQL Server 2012 AlwaysOn. e.g. SQL1 & SQL2.
I have configured backup job on both SQL Server with the following statement. and the job occurs every 10 minutes.
•declare @DBNAME sysname,@sqlstr varchar(500)
set @DBNAME = 'dba'
IF (sys.fn_hadr_backup_is_preferred_replica(@DBNAME)=0)
BEGIN
--Select 'This is not the preferred replica, exiting with success';
[Code] ...
I turned off SQL2 for Windows maintenance. So there is only SQL1 is online. Afterwards. I checked the backup folder and didn't see any new backup files was created after SQL2 was offline. I rerun the job. It still doesn't backup database on the Primary Replica. Then I searched on SQL Server Book online. It says
Prefer Secondary
Specifies that backups should occur on a secondary replica except when the primary replica is the only replica online. In that case, the backup should occur on the primary replica. This is the default option.
According to what it says, it should backup on the Primary Replica.
View 2 Replies
ADVERTISEMENT
Aug 6, 2014
I was working on a job to send me info each morning about database file free space and was noticing some odd things when looking at the log file VLFs for one of my databases in an AlwaysOn availability group.When I run DBCC LOGINFO on the secondary replica for this database, I get what I expect and most VLFs have a status of 0 (indicating the VLFs are reusable or unused). When I run DBCC LOGINFO on the primary replica, all of the VLFs have a status of 2 (active or recoverable).
Since log backups on the secondary replica in AlwaysOn still truncate the log in the primary replica, I would expect that the VLFs in the primary replica would also be mostly in a reusable or unused state. My log file sizes are the same size on each server and my backups are completing successfully. what might be causing the VLFs on the primary replica to have a status of 2 in DBCC LOGINFO when taking log backups from the secondary replica?
View 6 Replies
View Related
Apr 11, 2014
Looking for info on ole/requirement of primary and secondary replica under SQL Server 2012 AlwaysOn.
View 4 Replies
View Related
Sep 28, 2015
As per our client requirement we want to set synchronization time from primary replica to secondary replica after 20 minutes. Is it possible in MSSQL AlwaysOn Availability Groups in SQL Server 2012?
View 6 Replies
View Related
May 27, 2015
in my secondary server the database which is in restoring state , when i checked in always on dash board "This secondary database is not joined to the availability group" ,
View 3 Replies
View Related
Jun 9, 2015
SQL is generating dump every 1 min with error
EXCEPTION_ACCESS_VIOLATION reading address 0000000000000020 at
Server is running SP2 CU2.
View 1 Replies
View Related
Oct 14, 2015
Environment:-
Windows 2012 R2,
SQL 2012 (Primary Replica)
SQL 2012 (Seondary Replica)
SQL 2012 (Secondary Replica over WAN site)
There are database replicating on three SQL servers. WAN line is having performance issue because of limited bandwidth I have to remove SQL secondary replica over WAN site temporarily and add it again later when the WAN line is upgraded with between bandwidth What is the best practice to remove secondary replica and replicating database and add later from SQL management studio without interruptions on databases?
View 6 Replies
View Related
May 21, 2013
I have an AlwaysOn Availability group configured between 2 nodes (Synchronous)
Automatic failover was working fine until recently
I can failover between the nodes manually but automatic failover doesn't seem to be working. In my earlier test, I would shut down the SQL Service on the primary and within seconds, the secondary replica would take over. Recently I have performed the same test and the secondary replica enters the resolving state and the DB in unavailable.
I have tried everything here: [URL] ....
The only change I made was changing the availability mode from Synchronous to Asynchronous - Could that be the cause?
View 3 Replies
View Related
Mar 28, 2014
What happens when an automatic failover occurs, in a two server AlwaysOn Availability Group configuration, where the secondary replica is configured as read-only?
Will it only allow read-only connections, or will it become read-write and can accept INSERT, UPDATES and DELETES when assigned the new role as Primary?
Is it correct that adding a third server/node, that just acts as passive and should be used for automatic failover, to support true HADR, would NOT need another license .. and that licenses would only be required for the previous Primary and Secondary (Read-Only) replicas?
View 3 Replies
View Related
Apr 14, 2015
Here are my scenarios:
We have an application with replicated environment setup on sql server 2012 . Users will have a replica on their machines and they will replicate to the master database. It has 3 subscriptions subscribed to the publications on the master db.
1) We set up a replica(which uses sql server 2012) on a machine with no sql server on it. After the initial synchronization(used replmerge tool) the mdf file has grown to 33gigs and ldf has grown to 41 gigs. I went to sql server management studion . Right click and checked the properties of the local database. over all size is around 84 gb with little empty free space available.
2) We set up a replica(which uses sql server 2012) on a machine with sql server 2008 on it. After the initial synchronization(used replmerge tool) the mdf file has grown to 49 gigs and ldf has grown to 41 gigs. I went to sql server management studio , Right click and checked the properties of the local database. over all size is around 90 gb with 16 gb free space available.
3) We set up a replica(which uses sql server 2012) on a machine with sql server 2012 on it. We have dropped the local database and recreated the local db and did the initial synchronization using replmerge tool. The mdf file has grown to 49 gigs and ldf has grown to 41 gigs. I went to sql server management studio , Right click and checked the properties of the local database. over all size is around 90 gb with 16 gb free space available.
Why it is allocating the space differently? This is effecting our initial replica set up times.
View 0 Replies
View Related
May 6, 2014
How can we change the backup replica in Always on Cluster. I am not able to take backup because of this.
View 7 Replies
View Related
Jan 15, 2015
MSDN states the following on: Readable Secondary Replicas (AlwaysOn Availability Groups) for SQL Server 2014:
Limitations and Restrictions:
Change tracking and change data capture are not supported on secondary databases that belong to a readable secondary replica:
Change tracking is explicitly disabled on secondary databases.
Change data capture can be enabled on a secondary database, but this is not supported.
This confuses me: You can not track the changes. However you can enable CDC?
The scenario I am trying to achieve is to use SSIS CDC components on an asynchronous secondary replica. Is this possible? If not what would be other viable approaches?
View 0 Replies
View Related
May 5, 2014
Assume if i have a connection(Application intent readonly) starts with reading, writing and again reading data for a report. how it will works in SQL 2014 Always availability on?
View 3 Replies
View Related
Aug 11, 2015
We are not able to failover the AG to secondary replica. The process gets timed out and AG goes to resolving mode. Had to reboot the box in order to switch the AG back to primary node. We even rebuilt the whole AG from scratch but the issue remains.
Failed to bring availability group 'xxxx' online. The operation timed out. Verify that the local Windows Server Failover Clustering (WSFC) node is online. Then verify that the availability group resource exists in the WSFC cluster. If the problem persists, you might need to drop the availability group and create it again. [SQLSTATE 42000] (Error 41131). The step failed.
Not much information is available in the logs.
Version : sql server 2014 sp1
View 6 Replies
View Related
Jun 30, 2015
I was hoping for some information regarding table triggers. We have databases that are part of an AlwaysOn availability group on SQL Server 2012. Some of the tables have table triggers defined. There are both types of triggers, INSTEAD OF and AFTER INSERT, etc.
From my understanding of how secondary read-only replicas work, I am assuming that these triggers have no impact at all when the database is a read-only secondary replica and they only fire when the database is the primary read-write database.
However, after doing a search on the internet, I have not been able to find a definitive source of information.
View 3 Replies
View Related
Oct 14, 2014
We have a reporting database which is refreshed daily from prod backup and later creating new tables/views/indexes as part of the refresh job. Is there a better approach we can implement in sql 2012/2014 for this scenario since we are planning to migrate to sql2014.
View 5 Replies
View Related
Oct 12, 2015
I am working on adding DBs to the AG but for some reason I am getting this error.
"Joining DB on secondary replica resulted in error"
Msg: The remote copy of the database is not recovered far enough to enable DB mirroring or to join AG. Missing log records have to be applied to the remote DB by restoring the current log backups" Which I did. I took the log backup of DB1, restored it on DB2 with no recovery, but still I am getting the same error.
View 3 Replies
View Related
Sep 15, 2015
I have 3 servers taking part in an AlwaysOn AG.
I want to grant a user READ access to only one replica, and certainly not to the principle.
How do I go about doing this?
View 4 Replies
View Related
Sep 12, 2015
We have 2 switch between primary and secondary this morning.
after that one database in secondary went to "initializing / recovery pending".
How can i exit from this situation ?
View 3 Replies
View Related
Jul 16, 2015
I have 3 synchronous AlwaysON replicas: A, B and C. A is primary, B and C are secondary and both are set to Automatic recovery. How can I understand, which of them (B or C) will become primary when A goes offline? Well, Actually my final DB system should support following configuration:
1) Normally - A is primary B and C are sync secondary.
2) if A fails, B automatically becomes primary, C remains Sync secondary.
3) if A goes online, it becomes primary again
4) C becomes primary only after A and B fail (and there still should be cluster quorum!)
As I understood, first of all i should configure quorum the following way: A-0, B-1, C-1, folder-witness-1.
The problem, again, is: I cannot understand how to configure which replica becomes primary when AG fails over.
View 3 Replies
View Related
Jul 2, 2014
I have an availability group with read only replicas, readable secondary set to yes and allow all incoming connections. I have also configured the read only routing (at least I'm pretty sure this is correct).
If I login to SSMS with a user in the sysadmin role I can view the objects in the read only replica database. If I login with a user in the public role I'm unable to get past the obvious error:
"The database databaseA is not accessbile. (ObjectExplorer)"
I've also tried adding the "ApplicationIntent=ReadOnly" option.
View 4 Replies
View Related
Jun 17, 2015
I would like to setup replica for one of the databases for reporting. The current environment is a 2 node cluster(active/passive). I would like to add a 3rd node that can server as a secondary replica. The secondary replica will be on asynchronous commit mode.
The database that needs to have alwayson setup has column level encryption enabled.
* Do I need to backup and restore the service master key on secondary server in order to have the column level encryption to work on secondary server?
* What would be preferred Quorum settings?
* What is the setting for 'readable secondary' for primary and replica db?
* What should be the setting for 'Connections in Primary Role' for primary and replica db?
* We are trying to setup without a Listner. Do I need to setup AG Listner? Can the application exclusively use the [secondary instance name].[replica DB name] without a listner?
View 2 Replies
View Related
Aug 19, 2014
After failing over to the DR replica. All databases are out of sync. DR replicas were setup as async the other 2 are set up as sync. Is this by design. No data has been updated to any of these as they are test dbs. So all dbs should be the same, no data loss.
View 0 Replies
View Related
Oct 21, 2015
Trying to add a second replica to my SQL 2012 AG. for some reason i cant click the next button.
View 3 Replies
View Related
Oct 2, 2014
I have a scenario where a customer is going to be using Log Shipping to the DR site; however, we need to maintain the normal backup strategy on the current system. (i.e. Nightly Full, Every 6 Hour Differential and Hourly Transaction Log backup)I know how to setup Transaction Log Shipping and Fail-over to DR and backup but now the local backup strategy is going to be an issue. I use the [URL] .... maintenance solution currently.
Is it even possible to do regular backups locally keeping data integrity for your backup strategy with Transaction Log Shipping enabled?
View 2 Replies
View Related
Jul 9, 2014
We have a vendor that is exposing our database via a High Availability replica. They are geographically far away from us though so we would like to extract portions of the database over to our side for our reporting /warehousing purposes. I was curious if it is possible to setup snapshot replication on a high availability group?
View 0 Replies
View Related
Sep 5, 2014
Setting up a test AlwaysOn Availability Group for one database.
However, whenever I restore the database to the replica server and join it, it ends up with my user account as the owner of the database.
Obviously I do not want a user account as the database owner, but since it is read-only I cannot modify it directly. If I were able to fail the AG over to the replica, I could change the owner then, but I cannot due to business requirements. this AG is to essentially serve as a replacement to log shipping.
I tried doing the backups and restores using EXECUTE AS login = 'sa', and yet it still shows up as my user account.
View 2 Replies
View Related
May 9, 2006
Dear All,
We have a big concern in our Database system. We have 2000 transactions daily in our database. We need to replicate some how the database for our fail over setup. I tried transactional replication at midnight but our all systems locked and we had a lot of complaints from the customers and It was taking a lot of time to snapshot part and I had to abort it because of these reasons.
I need an advice how I can create a replication or is there any other way to replicate or is there any way to do this process without bothering the system? Please give me some advice and help..
View 1 Replies
View Related
Sep 23, 2015
"If we fail over a SQL AG group on a failover cluster from one node to another making the secondary the new primary, is there any reason why we would have to fail it back over to the old primary node?"
View 2 Replies
View Related
Jan 18, 2008
Hi i want to create a test environment for a system, therefore i need an exact replica of the database that is currently standing, how can i go about doing this, i am using SQL enterprise manager 2000, thank you.
View 2 Replies
View Related
May 14, 2015
is there any limition in AlwayOn to add database in secondary replica?
View 2 Replies
View Related
Feb 5, 2008
Hi,
I am new to SQL server.
I have two databases lets call them A & B, they reside in two PCs, each pC has its own C/C++ program
working with A or B, Two PCs are linked by PPP (for example), but the link is not permonent available,
the link is only available at certain time period, for example, at midnight.and the link is only last
certain period, during this period, A & B will do the transcation replica( just heard about that!) to
make them identical, A=B.
Now are my questions.
(1) Can database use dial up modem itself ? For PC program it is not the problem, but I am not sure whether
MS SQL server database can be configured to do such job automatically ?
(2) Can database have awareness of whether the link is available or not ? For example A is dialing modem, and
B realize that there is a incoming call.
(3) Once link is established, how two databases start to do the transcation replica ? Does SQL server has such ability to do this automatically ?
(4) Can database notice PC program that changes has occured ? so PC program can process it, see display new data.
Thanks
nick
View 1 Replies
View Related
Aug 11, 2015
I'm new to Sql Server and want to install SQL server alwayson clustering on my test environment. I followed the steps by this site: [URL] ....
On each node I can connect to SQL Server but why my 2nd node is not available so that I can add it as my 2ndary Replica?
According to this site, till "Always-On Availability Group Configuration" everything was successful.
View 6 Replies
View Related