SQL 2012 :: Calculating Elapsed Time Between Records?
Oct 29, 2015
I have a table that contains an employee id and dates signifying time periods that those employees were working. I need to calculate anniversaries, such as 20 year, which are the sum of all periods spend working projected out to 20 years. For example,
emp_idstart_date end_date
1001 1998-01-01 2003-06-21
1002 1999-05-23 2008-03-28
1001 2004-08-19 NULL
1003 2004-10-12 2006-07-25
1004 2005-04-28 NULL
1002 2008-11-02 NULL
1003 2009-05-17 NULL
The periods in which the employees were inactive (the time period between active ranges) would push back their anniversary date, obviously. I'm only concerned with employees that are currently active (ie. the most recent record has a NULL end date). I thought about trying to use datediff to calculate the time between active periods, but I'm not sure how to go about doing it.
View 9 Replies
ADVERTISEMENT
May 20, 2014
I have a requirement to be able to calculate the transit time between international locations when I have the flight departure time and flight arrival times and departure and arrival locations.
We have a problem though, in that the datetime stored are local times, and the journeys can involve crossing the international date line in either direction, so it is possible for the arrival time to be earlier than the departure time!
To give a famous example, if you flew Concorde from London to Washington, you could depart at 10am on the 1st of June (London time) and arrive at 8.00am on 1st June (Washington time)
Even worse, you could leave Brisbane at 2.00 am on the 1st June, cross the International Date Line and arrive at San Francisco at 23:00 on 31st May!
View 6 Replies
View Related
Jun 19, 2015
I am trying to calculate the time difference between the value in the row and the min value in the table. So say the min value in the table is 2014-05-29 14:44:17.713. (This is the start time of the test.) Now say the test ends at 2014-05-29 17:10:17.010. There are many rows recorded during that start and end time, for each row created a time stamp is created. I am trying to calculate the elapsed time and have it as a row in the results.
min(timestamp) - timestamp(value in row) = elapsed time for that test
where Channel = '273'
Here is the table DDL
CREATE DATABASE SpecTest;
USE SpecTest
GO
CREATE TABLE [dbo].[Spec1](
[Spec1ID] [int] IDENTITY(1,1) NOT NULL,
[Channel] [int] NOT NULL,
[Code] ....
Here is some dummy data to use
INSERT INTO Spec1 (Channel, Timestamp, Lambda, Power)
VALUES(273, '2014-05-29 14:44:17.713', 800, '-64.91');
INSERT INTO Spec1 (Channel, Timestamp, Lambda, Power)
VALUES(273, '2014-05-29 15:05:09.507', 800, '-59.11');
INSERT INTO Spec1 (Channel, Timestamp, Lambda, Power)
[Code] ....
Example desired results (I hope the formatting works)
Channel | Timestamp | Lambda | Power | Elapsed_Time
______________________________________________________________
273 | '2014-05-29 14:44:17.713', | 800, | '-64.91' | 0
273 | '2014-05-29 15:05:09.507', | 800, | '-64.91' | 00:20:51
273 | '2014-05-29 15:26:00.520', | 800, | '-64.91' | 00:41:42
273 | '2014-05-29 16:28:34.213', | 800, | '-64.91' | 01:44:16
273 | '2014-05-29 16:49:25.853', | 800, | '-64.91' | 02:05:08
273 | '2014-05-29 17:10:17.010', | 800, | '-64.91' | 02:25:59
View 9 Replies
View Related
Dec 21, 2005
I have a data set like so:UTC_TIME Timestamp NodeID Message FlagLineStation11/19/2005 10:45:07 1132397107.91 1 3 5 1028103411/3/2005 21:05:35 1131051935.20 2 3 5 1009104311/25/2005 21:12:16 1132953136.59 3 3 5 10371049I added the UTC_TIME column in as aconversion of the unix timestamp inthe TIMESTAMP column.Keeping things simple and straightforward, I need to be able tocalculate the difference from one record to the next (ordered byTIMESTAMP or UTC_TIME) and output the result into another column in thetable.NODEID is the unique id.First, what is the function to do so if, say, I only wanted tocalculate the difference between 2 records as just a basic SELECTstatement. That way I can answer quick question based on any one or twoNODEID's.Second, how would I further that to continually calculate (as statedabove)?WOuld this be a stored procedure? A trigger? A cursor?I am learning as I go here. Any help is greatly appreciated.R.
View 4 Replies
View Related
Apr 25, 2014
Sample Table
USE [Testing]
GO
/****** Object: Table [dbo].[Testing] Script Date: 4/25/2014 11:08:18 AM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
[Code] ....
It seems to work fine with one million records.
Each primary key is unique, but the begindate is non-unique, and i guess even if i use datetime2 and add nanoseconds, from what i have read, there is a chance that i could have a duplicate datetime since the date is imported via XML from multiple sources.
View 7 Replies
View Related
Aug 17, 2007
Ok, so I have some horribly convuluted SQL that I would love to optomize. I'm not happy leaving it in it's current state, that's for sure!
I'm currently working on our test bed servers, so obviously my stats are out because of the "crap-ness" (yes, that's the technical term) of the hardware, but still, it should NEVER need to take this long!!
Basically, the issue arises in the nasty join to the career table (one employee can have multiple career lines). Just to make things complicated, employees can have any number of career records on any given date, these can even be input for future career events. The following SQL picks out the latest-current career date for each employee based on the career_date being <= GetDate() and the date of entry for this date being the greatest.
E.g.
career_date | datetime_created
2009-01-01 | 2006-05-05 13:55:21.000
2007-01-01 | 2006-05-05 13:54:18.000
2007-01-01 | 2006-05-05 13:52:55.000
From the above we want to return
2007-01-01 | 2006-05-05 13:54:18.000
SET STATISTICS IO ON
SET STATISTICS TIME ON
SELECT a.sAMAccountNameAs 'sAMAccountName'
, a.userPrincipalNameAs 'userPrincipalName'
, 'TRUE'As 'Modify'
, RTRIM(e.unique_identifier)As 'employeeID'
, RTRIM(e.employee_number)As 'employeeNumber'
, RTRIM(e.known_as)
+ CASE WHEN RTRIM(e.surname) IS NOT NULL THEN
' ' + RTRIM(e.surname) ELSE NULL ENDAs 'displayName'
, RTRIM(e.known_as)As 'givenName'
, RTRIM(e.surname)As 'sn'
, RTRIM(c.job_title)As 'title'
, RTRIM(c.division)As 'company'
, RTRIM(c.department)As 'department'
, RTRIM(l.description)As 'physicalDeliveryOfficeName'
, RTRIM(REPLACE(am.dn,'\',''))As 'manager'
, t.full_mobile
+ CASE WHEN RTRIM(t.mobile_number) IS NOT NULL THEN
' (DD: ' + RTRIM(t.mobile_number) + ')'ELSE NULL END
As 'mobile'
, t.mobile_numberAs 'otherMobile'
, ad.address_ad_countryAs 'c'
, ad.address_ad_address1
+ CASE WHEN ad.address_ad_address2 IS NOT NULL THEN
', ' + ad.address_ad_address2 ELSE NULL END
+ CASE WHEN ad.address_ad_address3 IS NOT NULL THEN
', ' + ad.address_ad_address3 ELSE NULL END
+ CASE WHEN ad.address_ad_address4 IS NOT NULL THEN
', ' + ad.address_ad_address4 ELSE NULL END
+ CASE WHEN ad.address_ad_address5 IS NOT NULL THEN
', ' + ad.address_ad_address5 ELSE NULL ENDAs 'streetAddress'
, ad.address_ad_poboxAs 'postOfficeBox'
, ad.address_ad_cityAs 'l'
, ad.address_ad_CountyAs 'st'
, ad.address_ad_postcodeAs 'postalCode'
, RTRIM(ad.address_ad_telephone) +
CASE WHEN RTRIM(a.othertelephone) IS NOT NULL
AND RTRIM(ad.address_ad_telephone) IS NOT NULL THEN
' (Ext: ' + RTRIM(a.othertelephone) + ')'
ELSE
CASE WHEN RTRIM(a.othertelephone) IS NOT NULL
AND RTRIM(ad.address_ad_telephone) IS NULL THEN
'Ext: ' + RTRIM(a.othertelephone)
ELSE NULL
END
ENDAs 'telephoneNumber'
FROM employee e
LEFT
JOIN career c
ON c.parent_identifier = e.unique_identifier
AND c.career_date =(
SELECTmax(c2.career_date)
FROMpwa_master.career c2
WHEREc2.parent_identifier = c.parent_identifier
ANDc2.career_date <= GetDate()
)
AND c.datetime_created =(
SELECT max(c3.datetime_created)
FROMpwa_master.career c3
WHEREc3.parent_identifier = c.parent_identifier
ANDc3.career_date = c.career_date
)
LEFT
OUTER
JOIN AD_Import am
ON am.employeeNumber = c.manager_number
INNER
JOIN AD_Import a
ON a.employeeID = e.unique_identifier
LEFT
JOIN AD_Telephone t
ON t.unique_identifier = e.unique_identifier
LEFT
JOIN AD_Address ad
ON ad.address_pwa_location = e.location
LEFT
JOIN xlocat l
ON l.code = c.location
WHERE (a.employeeNumber IS NOT NULL
OR a.employeeID IS NOT NULL)
SQL Server Execution Times:
CPU time = 0 ms, elapsed time = 0 ms.
(1706 row(s) affected)
Table 'AD_Import'. Scan count 4, logical reads 106, physical reads 0, read-ahead reads 0.
Table 'AD_Address'. Scan count 1, logical reads 2, physical reads 0, read-ahead reads 0.
Table 'AD_Telephone'. Scan count 2, logical reads 10, physical reads 0, read-ahead reads 0.
Table 'Worktable'. Scan count 868, logical reads 956, physical reads 0, read-ahead reads 0.
Table 'xlocat'. Scan count 2, logical reads 8, physical reads 0, read-ahead reads 0.
Table 'career'. Scan count 5088, logical reads 2564843, physical reads 0, read-ahead reads 0.
Table 'people'. Scan count 1697, logical reads 5253, physical reads 0, read-ahead reads 0.
Table 'Worktable'. Scan count 826, logical reads 914, physical reads 0, read-ahead reads 0.
SQL Server Execution Times:
CPU time = 15203 ms, elapsed time = 8114 ms.
Any advice on what I can do to optomize?
Oh judt to point out that "employee" is a view on the "Table 'people'."
EDIT: I know it's pointing out the obvious, but I'm pulling out the managers "DN" from AD_Import based on the manager_number and employeeNumber matching.
View 14 Replies
View Related
Dec 18, 2007
I need a formula to calculate the time (let's say in minutes) between two dates/times.
The problem is that I have to exclude the time between 06 PM and 06 AM and also exclude the time in the weekend (Saturday and Sunday).
I will use this in a couple of reports made in Reporting Services.
If anyone have an algoritm that could be modified for this and is willing to share this I would be very grateful.
Many thanks!
/Per Lissel
View 3 Replies
View Related
Sep 11, 2013
I have about 20 scripts to run as
exec script1 ...
exec script20
I want to know how long does each of the script piece take. So how can I keep the records of time spent and save them as a file or save them into a table?
View 4 Replies
View Related
Nov 15, 2013
I am developing a form for a mortgage company. There can be any number of borrowers on a given loan, and the business has asked that this form return only 2 borrowers at a time for a loan. For example, if there are 3 borrowers for a loan, they want the first copy of the form to print the first 2 borrowers and then another copy of the form to print the 3rd. No matter how many copies are printed, they want the borrower information to be labeled as 'Borrower1' xyz and 'Borrower2' xyz. Also, there will be a LOT more fields returned on the real form, so the sample information below is very simplified test data.
Sample Data:
CREATE TABLE #t (LoanID VARCHAR(5), BorrowerName VARCHAR(20), BorrowerOrder INT);
GO
INSERT INTO #t VALUES
('::E', 'John Smith', 0)
, ('::E', 'Jane Smith', 1)
, ('::E', 'Rob Jackson', 2)
, ('AF_CF', 'Sloan Burton', 1)
[code]...
I don't want that 2nd record to return. This result is what makes me think of gaps and islands, but I don't know if the 2nd record is really an island since it's (1) not stored this way...it's returning this way because of the query and (2) it's not sequential data..I tried restricting this by putting this into a CTE and then returning only the odd numbered records like I have below. This runs pretty quickly when dealing with one loan. But...I am concerned that the CTE will be slow when we run batches of loans.
Attempt with CTE:
--With CTE
;WITH cte AS
(SELECT
Borrower1 = BorrowerName
, Borrower2 = LEAD(BorrowerName) OVER(ORDER BY BorrowerOrder)
, RowNumber = ROW_NUMBER() OVER(ORDER BY BorrowerOrder)
[code]...
Is there a better, cleaner way to do this? Or is the CTE the best way to go?
View 8 Replies
View Related
Aug 5, 2015
I'm looking for a way of taking a query which returns a set of date time fields (probable maximum of 20 rows) and looping through each value to see if it exists in a separate table.
E.g.
Query 1
Select ID, Person, ProposedEvent, DayField, TimeField
from MyOptions
where person = 'me'
Table
Select Person, ExistingEvent, DayField, TimeField
from MyTimetable
where person ='me'
Loop through Query 1 and if it finds ANY matching Dayfield AND Timefield in Query/Table 2, return the ProposedEvent (just as a message, the loop could stop there), if no match a message saying all is fine can proceed to process form blah blah.
I'm essentially wanting somebody to select a bunch of events in a form, query 1 then finds all the days and times those events happen and check that none of them exist in the MyTimetable table.
View 5 Replies
View Related
Aug 27, 2005
Hello,
I am fairly new to this, but I need to write a query that calculates whether an order made a shipping cutoff based on creation time, and when it actually shipped, based on local customer time. All times in the table below are central time.
Heres where it gets complicated for me. If the order was created after 8:00am local customer time the same day, and shipped prior to 5pm local customer time, it would be considered a pass, or a 1. If an order was created after 8am local customer time, BUT didnt ship until AFTER 5pm local customer time, it would be considered a failure or a 0. And to complicate things even more, if the order is created after 5pm local customer time, the order create time would be treated as it was created at 8am local customer time the following day local customer time, and would need to be shipped prior to 5pm local customer time that day. Would CASE be appropriate for this? Or am I thinking wrong? Any help would really be appreciated!!
Ordernum OrderCreate OrderShipDate TimeZ
67890 5/5/2005 11:575/6/2005 15:33 EST
35789 5/5/2005 13:575/5/2005 14:19 MST
44465 5/5/2005 13:58 5/5/2005 21:58 CST
87654 5/5/2005 18:00 5/7/2005 21:58 PST
View 13 Replies
View Related
Oct 14, 2005
I have a table called Tickets which contains ticket information for a machine. Each machine can have more than one ticket number opened at the same time. The ticket number contains start date/time and end date/time of the ticket. Thereefore the table looks something like this:
Ticket_No (int)
Machine_No (int)
Description (char)
Start_Time (datetime)
End_Time (datetime)
I want to be able to calculate total duration time(in hours) that EACH MACHINE had a ticket open...but here is the tricky part. The total duration time that a machine had ticket open has to encompas any tickets that may fall in the same time period. For example:
If Machine A has a ticket open at 8:30 and the ticket is closed at 10:00. Meanwhile, Machine A had another separate ticket open at 9:30 which was closed at 10:30. In this case, the total duration time for this machine would be from 8:30 to 10:30 for a total of 2 hrs duration time.
Can anyone help me get started in tackling this problem or provide any examples?
View 4 Replies
View Related
Dec 4, 2013
Code:
CREATE TABLE [dbo].[DigiTracker](
[DigitrackID] [int] IDENTITY(1,1) NOT NULL,
[contact_id] [int] NOT NULL,
[Code]....
-- not accurate b/c it returns 0 for all TimePerPageSec
SELECT DATEDIFF(second,min(createDt),max(createDt)) AS TimePerPageSec
FROM DigiTracker
GROUP BY contact_id, ZinePageNumber
time spent (in seconds) between each record
View 9 Replies
View Related
Dec 13, 2007
Hi guys, I am having difficulty calculating the time duration between receiving process to shipping process.
I have a table that consists of: Order#, Processes, Time_In, Time_Out.
Order# can be 1, 2, 3, 4, 5.
While at the same time Order# 1 can go through more than one process, i.e.: Receiving, VisualTest, MechanicalTest, ..., Shipping.
Every Order# does not necessarily goes through all processes, but surely they will go through receiving process and shipping process.
For each process we will have recorded time when the order# comes in and when it finishes with each process.
I need to calculate the length of time from Time_In from Receiving to Time_Out in Shipping.
I.E.:
Order# | Process | Time_In | Time_out
1 | Receiving | 2007-12-1 10:00:00.000 | 2007-12-1 10:10:00.000
1 | Incoming Q.A. | 2007-12-1 10:40:00.000 | 2007-12-1 11:42:00.000
1 | Visual Check | 2007-12-2 08:10:00.000 | 2007-12-2 11:00:00.000
1 | Shipping | 2007-12-2 11:20:00.000 | 2007-12-2 11:52:00.000
2 | xxxxx | xxxxx | xxxxx
2 | xxxxx | xxxxx | xxxxx
2 | xxxxx | xxxxx | xxxxx
Please help.
Thanks in advance.
View 2 Replies
View Related
Jul 20, 2005
Hi,I have a table called Bookings which has two important columns;Booking_Start_Time and Booking_End_Time. These columns are both of typeDATETIME. Given any day how can I calculate how many hours are availablebetween the hours of 09.00 and 17.30 so a user can see at a glance how manyhours they have unbooked on a particular day (i.e. 8.5 hours less the timeof any bookings on that day), can this be done with a queryor do I have to work it out in my code?Thanks for your help
View 2 Replies
View Related
Dec 13, 2007
Hi guys, I am having difficulty calculating the time duration between receiving process to shipping process.
I have a table that consists of: Order#, Processes, Time_In, Time_Out.
Order# can be 1, 2, 3, 4, 5.
While at the same time Order# 1 can go through more than one process, i.e.: Receiving, VisualTest, MechanicalTest, ..., Shipping.
Every Order# does not necessarily goes through all processes, but surely they will go through receiving process and shipping process.
For each process we will have recorded time when the order# comes in and when it finishes with each process.
I need to calculate the length of time from Time_In from Receiving to Time_Out in Shipping.
I.E.:
Order# | Process | Time_In | Time_out
1 | Receiving | 2007-12-1 10:00:00.000 | 2007-12-1 10:10:00.000
1 | Incoming Q.A. | 2007-12-1 10:40:00.000 | 2007-12-1 11:42:00.000
1 | Visual Check | 2007-12-2 08:10:00.000 | 2007-12-2 11:00:00.000
1 | Shipping | 2007-12-2 11:20:00.000 | 2007-12-2 11:52:00.000
2 | xxxxx | xxxxx | xxxxx
2 | xxxxx | xxxxx | xxxxx
2 | xxxxx | xxxxx | xxxxx
Please help.
Thanks in advance.
View 6 Replies
View Related
Dec 9, 2011
I have data in which i need to calculate employees working hours for a day...
name time in_out
manisha 2011-01-01 9:30:00.000am 1
manisha 2011-01-01 10:30:00.000 0
manisha 2011-01-01 10:45:00.000 1
manisha 2011-01-02 1:00:00.000am 0
How can i calculate time in that two dates as 1 is for entry an 0 is for exit..
View 2 Replies
View Related
Jun 6, 2008
Hi all,
Thanks for setting up such a great site and forum.
Here is my problem:
I have a table like the following in SQL Server 2005:
order | taskid | main_person | temp_person | start_assign_date
1 | 3 | John | John | 2008-01-01 10:20:22
2 | 3 | John | Joe | 2008-02-05 15:20:22
3 | 3 | John | John | 2008-02-07 20:25:20
4 | 6 | Joe | Joe | 2008-01-01 10:20:22
5 | 6 | Joe | Mike | 2008-02-01 10:20:22
6 | 10 | Doug | Doug | 2008-01-01 10:20:22
7 | 7 | Russ | Russ | 2008-02-01 11:20:22
8 | 7 | Russ | Mike | 2008-02-08 12:20:22
9 | 7 | Russ | John | 2008-02-10 20:05:12
It was made to record who was in charge of a specific task at a specific time. Each task has its own main responsible person and some substitutes for that person as Temporary Persons (who did the task while main person was away). The Main Person's name is in the temp_person column when he is doing the task by himself.
I'd like to generate a report that shows:
- in a specific time period
- which persons were in charge of a specific task and
- for how long
Something like this:
From 2008-##-## to 2008-##-##
Task 3 - John - 15 days
Task 3 - Joe - 5 days
Task 6 - Joe - 18 days
Task 6 - Mike - 2 days
Task 10 - Doug - 20 days
I have some ideas to do that when there are both start and end dates for every record but I couldn't find a way to use the next assignment start date for each task, as the end date for its previous record (in that task group) to calculate the duration for that record.
I can group the tasks and users and put them in the chronological order but I can't indicate the next start date as the end date for the previous record (in specific task group) to use the date difference functions.
Any hint or comment would be appreciated.
Thanks
Sami
View 4 Replies
View Related
Dec 19, 2007
Hi all
As you know when you run a piece of TSQL scrypt in Query Analizer
at the bottom of the page , sql-server will show you the Time of completion of your code....is there any way to capture this time
from SQL-Server environment and use it in the Front-End Application
to inform the user?
Kind regards.
View 2 Replies
View Related
Nov 23, 2015
select TOP 10 rec_id,trans_id,number_id,card_no,message_id,trans_datetimefrom [dbo].[trans_log]
order by trans_datetime desc101, 1,34343, 99999, 200, 2015-11-23 12:27:25.710101,2,34343,99999,210,2015-11-23
12:27:26.710102,3,43434,88888,200,2015-11-23 12:28:26.714102,4,43434,88888,233,2015-11-23 12:28:27.710expected result:34343,99999,datediff(ss,'2015-11-23 12:27:26.710','2015-11-23 12:27:25.710') --difference between row 2 and row 143434,88888,datediff(ss,'2015-11-23 12:28:26.714','2015-11-23 12:28:27.710') --
difference between row 4 and row 3difference between row 6 and row 5...In the above query, I always want to find the difference in transaction date time between second and first row in a moving window.I have the unique id as rec_id to compare the next row with the previous row.
View 3 Replies
View Related
May 20, 2008
I have two tables and they have a foreign key relationship. It will be a 1 to Many realationship.
Table1- the primary key table has the following columns
ContentID - int identity field
DateAdded- datetime
Table2 - The foreign key table, has the following relevant fields
FK - int foreign key
version - int
When an initial record is added there is a record added to each table. The ContentID in Table1 will match the FK field in Table2. Then a user will be able to "edit" the record in Table2, but instead of writing over the record that is already there, a new record will be added to Table2. I would like to calculate the version field where each time a record is added for the particular ContentID/FK it adds 1 to the last version that was added to that particular ContentID/FK.
Does that make sense. I am trying to implement some type of revision tracking for my CMS that I am building and this is the only way I can come up with because my client is worried that somebody will go in and make incorrect changes to their site and they want to be able to roll it back to a previous version.
I would appreciate any ideas.
Thanks,
laura
View 5 Replies
View Related
Mar 20, 2014
writing the query for the following, I need to collapse the continuity. If the termdate for an ID is one day less than the effdate of the next id (for the same ID) i need to collapse the records. See below example .....how should i write the query which will give me the desired output. i.e., get min(effdate) and max(termdate) if termdate is one day less than the effdate of next record.
ID effdate termdate
556868 1999-01-01 1999-06-30
556868 1999-07-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-01-31
556872 2004-02-01 2004-02-29
output should be ......
ID effdate termdate
556868 1999-01-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-02-29
View 0 Replies
View Related
Mar 17, 2008
Calculating time between two date In Sql Server 2005help me ..
View 3 Replies
View Related
Feb 8, 2007
I am using MS SQL Server 2000.
I have 4 text fields
1. event begin date
2. event begin time
3. event end date
4. event end time
I have to find the day and time difference in months days hours and minutes between the event begin date & time and the event end date & time – The event begin date and event end date are char(8) & event begin time and event end time are char(4) – with military time. I would need to combine the event begin date & event begin time to get the event begin date & time and the same for the event end date & time.
If the values of the 4 text fields are
event begin date = ‘20070207’, event begin time = ‘2015’, event end date = ‘20070208’, event end time = ‘0105’, the difference should be 0 month 0 day 4 hours 50 minutes.
Can somebody please help with MS SQL Server 2000 syntax?
View 1 Replies
View Related
Jun 17, 2014
I have a requirement to calculate the total outage time, based on logged fault tickets, of network nodes. Basically, multiple tickets may be raised for a single node and those tickets could overlap or sequence over a given period; the task here is to calculate the total time (hh:mm) of the outage in the period.
Ex:
3 tickets raised for a node outage over, say, a 48 hour period. Ticket 1 (spanning a total of 5 hours) overlaps with ticket 2 (spans 3 hours) by 1 hour; ticket 3 starts 5 hours after ticket 2 and spans 1 hour. Total outage time on the tickets is 7hrs + 1hr (T1+T2 minus the 1hr overlap) and the full time of T3.
In summary, it's calculating the total ticket time, allowing for overlaps of tickets, etc.
View 3 Replies
View Related
Dec 28, 2006
I am setting up a monitor to alert me if an SQL job has failed in the "last 20 minutes". This should run 24 hours a day, 7 days a week. My query looks something like this.
select * from TALMAIN.msdb.dbo.sysjobhistory where job_id = '7139D5D1-CD88-46E8-8324-5D5A0D8D3A27' and run_status <> 1 and
DATEPART(YYYY,GETDATE()) = substring(convert(char(8),run_date),1,4)and
DATEPART(MM,GETDATE()) = substring(convert(char(8),run_date),5,2) and
DATEPART(DD,GETDATE()) = substring(convert(char(8),run_date),7,2)and DATEPART(HH,GETDATE()) = substring(convert(char(8),run_time),1,2)and (DATEPART(MI,GETDATE()) - substring(convert(char(8),run_time),3,2)) <= 20.
The run_date and run_time columns in msdb..sysjobhistory are stored as integers. Tried a couple of things, but I am unable to convert both of them to datetime data type. The last conditions in the above logic hold true for only "2 digit" hour and minute values.
DATEPART(HH,GETDATE()) = substring(convert(char(8),run_time),1,2)and (DATEPART(MI,GETDATE()) - substring(convert(char(8),run_time),3,2)).
What about time values like 00:05 AM and single digit time values like 1:00 AM and 9:05 AM, for example?. I pasted some sample run_date and run_time values from sysjobhistory below.
run_date run_time
2006122821510 -- 02:15:10 AM (how to get the minute count?)
2006122821510 -- 02:15:10 AM (same as above)
20061227233014 -- 23:30:14 PM (this is strt forward)
20061227233014 -- 23:30:14 PM (same as above)
200612273016 -- 00:30:16 AM (how to get minute count?)
200612273015 -- 00:30:15 AM (how to get minute count?)
Is there a simpler logic to achieve this? Hope I was clear, else let me know. Please advise. Thank you.
View 5 Replies
View Related
Mar 7, 2007
I'm trying to find a solution to for a report i am building and was hoping that some of you will share your expertise with me. Basically, I need to work out how long an Incident Ticket was suspended (ie it's status is "on hold").
The data is stored something similar to the following...
Ticket Date Status
------ ---- ------
333 14/03/2005 10:24:19 "to on hold"
333 14/03/2005 15:23:01 "from on hold"
334 14/03/2005 11:14:11 "to on hold"
334 14/03/2005 16:26:15 "from on hold"
335 15/03/2005 10:10:15 "to on hold"
335 15/03/2005 11:15:35 "from on hold"
335 15/03/2005 13:26:10 "to on hold"
335 15/03/2005 14:30:59 "from on hold"
335 16/03/2005 14:00:05 "to on hold"
335 16/03/2005 16:45:15 "from on hold"
336 16/03/2005 10:10:15 "to on hold"
336 16/03/2005 12:45:12 "from on hold"
This is the result i'd like to see....
Ticket Start Hold End Hold Time Suspended
------ ---------- -------- --------------
333 14/03/2005 10:24:19 14/03/2005 15:23:01 datediff(...
334 14/03/2005 11:14:11 14/03/2005 16:26:15 datediff(...
335 15/03/2005 10:10:15 15/03/2005 11:15:35 datediff(...
335 15/03/2005 13:26:10 15/03/2005 14:30:59 datediff(...
335 16/03/2005 14:00:05 16/03/2005 16:45:15 datediff(...
336 16/03/2005 10:10:15 16/03/2005 12:45:12 datediff(...
Has anybody done something along the same lines? If so, could you point me in the right direction?
Thanks in anticipation
Jon
View 6 Replies
View Related
Jul 13, 2015
We are maintaining 3 Shifts in our database. Problem in maintaining date and time for 3rd Shift. For example, today date is 13th July and third shift timing is 11 PM - 7 AM. Then I have to display the beginning date as 13/07/2015 11 PM and end date as 14/07/2015 7 AM. Please find the data(in seconds) available in database which I need to use for my calculation.
Date(Fcreacion)
Start time in Seconds(Hcreacion)
End time in seconds(Hcerrar)
turno(Shift)
[code]...
View 3 Replies
View Related
Mar 6, 2008
We have a proc that runs nightly which updates stats. For each database it will run dbcc updateusage on each table, then then sp_updatestats on the database itself.
This process normally takes about an hour, but recently the time has gone up dramatically.
I am looking at ways of making the run faster. One suggestion was to split the work and have it run in parrallel, with multiple procs all doing the same job but on different databases. So for example, I could have a proc that would determine which databases would take the longest to process, and then call 3 different copies of our update proc, each getting a different set of databases to process.
If I went this route, how could I determine which databases would take the longest to complete this process? I'm investigating determining this from sysindexes' rowmodctr, or maybe just database size?
Any suggestions on how I could get an estimate of which dbs would be the most costly to update stats? This is for SQL Server 2000.
Thanks
View 3 Replies
View Related
Mar 25, 2014
I have Two Time fields in a table. Time(0). An "opening time" and a "closing time". They can hold any legit time.
I want to calculate in a SELECT Statement how many minutes within this range are within 9am to 5pm (which I'll convert to hours).
For example, here's an easy example:
OPEN: 9:00:00
CLOSE: 17:00:00
8 Hours/480 minutes
I could get this easy enough with a DATEDIFF function.
But what about:
OPEN: 08:00:00
CLOSE: 18:00:00
10 Hours total but only 8 of those 10 are within 9am-5pm.
Or what about:
OPEN: 10:00:00
CLOSE: 20:00:00
10 Hours total but only 7 are within 9am-5pm range.
I can calculate the total hours/minutes between the two times but not within that special range.
View 4 Replies
View Related
Aug 7, 2014
So I have been struggling with a way to perform inventory turn calculations in SQL. I'll start off with the formula. Basically the formula is Cost of Goods Sold over last 12 months / Average Inventory Value over the last 12 months. Short hand as COGS/AvgInventoryValue = Turns
In order to obtain the COGS value I take the Avg(UnitCost) * Sum(InvoicedQty) in the last 12 Months for Sales documents. This is represented as DOCUMENTTYPE = 2
Then divide AvgInventoryValue
To obtain the AvgInventoryValue I need to know the Quantity purchased in the 12 month period * Avg(UnitCost) + QuantityOnHand at the start of the period * Avg(UnitCost)
The purchased documents are represented with DOCUMENTTYPE = 6
The purchases will be positive since we are putting value in. The sales are negative since value is going out. I'll start with a simple example where the product is at zero Quantity On Hand at the beginning of the period.
--CREAT THE TEMP TABLE
create table #VALUEENTRY
(
ITEMNO VARCHAR (50) NOT NULL
, POSTINGDATEDATETIME NOT NULL
, DOCUMENTTYPEINT NOT NULL
[code]....
Is there another approach I should take to obtain the inventory turns?Also how do I account for periods earlier than 12 months where inventory is left over?In the sample data this item happened to be at zero inventory on hand at the start of the period. Also I believe it is my subquery's which are throwing the numbers off but I'm not sure how to isolate the subquery to just perform the result for a specific item. It is aggregating the entire table. How can I make the subquery more specific?
View 3 Replies
View Related
May 22, 2014
This function will return working hours between given 2 dates. This function assumes that the break is between 9:45 AM and 10 AM and that Lunch is between 12:30 PM and 1 PM. This function also assumes that the working hours are between 7:30 AM and 4 PM. There is a section for public holidays there. We have a table for that you might not so that piece needs to be fixed.
CREATE function [dbo].[fnc_myHinkley_ASSY_CalcWorkingMinutes] (@StartDate datetime, @EndDate datetime)
RETURNS decimal(14,2)
/*
Programmer: Goran Borojevic
Date: 5/14/2014
This function will return working hours between given 2 dates. This function assumes that the break is between 9:45 AM and 10 AM and that Lunch is between 12:30 PM and 1 PM. This function also assumes that the working hours are between 7:30 AM and 4 PM.
*/
AS
BEGIN
--check if one of the dates is null
if @StartDate is null or @EndDate is null
RETURN 0
[code]...
View 9 Replies
View Related
Jul 23, 2015
I am trying to calculate the number of hours a device has been used and I cant find how. I need a query that calculated and does an average of the number of hrs used in a week.
View 5 Replies
View Related
