SQL 2012 :: Connect To Localhost But Not 127.0.0.1?
Jul 5, 2014
I am struggling to set a SQL Server Express for remote access...
Since it is the only instance on this server, I have set it up to use port 1433 by amending the IPALL entry of the Server Network Configuration, TCP/IP Properties.
I have also disabled "Shared Memory" and "Named Pipes" to leave only TCP/IP enabled as a server network config.
I have stopped the Browser Service because I think I don't need it if I use port 1433.
From the server itself, I can connect to my SQL Server through "localhostSQLEXPRESS" or "servernameSQLEXPRESS" but not from "10.xxx.xxx.xxxSQLEXPRESS" or "127.0.0.1SQLEXPRESS"
I suppose until I can access my server from itself using the IPAddress, there is no chance connecting remotely...
View 5 Replies
ADVERTISEMENT
May 22, 2007
If I try to connect to localhost in the connection manager I get the error
"Test connection failed because of an error in initialising provider. Login timeout expired."
If I try to connect using server/instance in the connection mananger however, it connects just fine.
Any ideas?
Gary
View 1 Replies
View Related
Feb 7, 2007
I'm trying to log into a local sql 2005 exp server on my XP box. I've created a new user and create a new db. The new user is mapped to the db and has read/write access. When I try to log in directly to the server via the management studio express I get the following error:
==================================
Cannot connect to localhost.
===================================
A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (.Net SqlClient Data Provider)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=233&LinkId=20476 --- THIS LINK IS DEAD AS IT DOES NOT EXIST
------------------------------
Server Name: localhost
Error Number: 233
Severity: 20
State: 0
------------------------------
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error)
at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParserStateObject.ReadPacket(Int32 bytesExpected)
at System.Data.SqlClient.TdsParserStateObject.ReadBuffer()
at System.Data.SqlClient.TdsParserStateObject.ReadByte()
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
View 5 Replies
View Related
Mar 30, 2007
Hi!
When trying to log into Reporting Services in SQL Server 2005 Management Studio, I receive the following error message:
TITEL: Verbindung mit Server herstellen
------------------------------
Es kann keine Verbindung mit 'RD2MWD000349' hergestellt werden.
------------------------------
ZUSÄTZLICHE INFORMATIONEN:
Unable to connect to the remote server (Microsoft.SqlServer.Management.UI.RSClient)
------------------------------
No connection could be made because the target machine actively refused it (System)
------------------------------
SCHALTFLÄCHEN:
OK
------------------------------
Has anybody had that problem before? Happens right after installation, no customisation of the SQL Server has been done yet. And I run the server on localhost.......
View 3 Replies
View Related
Feb 13, 2008
Hello all, I hope someone can help me with this.
This is a new SQL Server 2005 cluster that we just installed for the first time, with SP2. I am trying to use a stored procedure with xp_cmdshell to run a script to backup the databases. I get the following error: locked access to procedure 'sys.xp_cmdshell' of component 'xp_cmdshell' because this component is turned off as part of the security configuration for this server. A system administrator can enable the use of 'xp_cmdshell' by using sp_configure. For more information about enabling 'xp_cmdshell', see "Surface Area Configuration" in SQL Server Books Online.
So I started Surface Area Configuration on the local SQL Server itself, and clicked on "Surface Area Configuration for Features". I then got the following error:
"Failed to connect to localhost. (Mirosoft.SqlServer.ConnectionInfo)
Additional information: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2)
I am logged onto the server as a user with Admin privs; I installed SQL Server using that id. I am logged in via remote connection, so I know it allows remote connections... and I am logged into the server itself when I try to run the tool, so I don't understand why it's saying that it's trying to connect remotely.
Has anyone else ever experienced this problem? Thanks for any help you can give.
Best, Amy
View 13 Replies
View Related
Nov 8, 2006
Greetings all,I cannot connect to my SSIS service from Management Studio. This is on my local machine, which is my "sandbox" and preliminary development platform.
There are slightly different error messages and extended information returned depending on whether I connect using "localhost" or my explicit machine name.
I have tried registering MSXML*.dll as suggested elsewhere in these forums. I've also tried the DCOM config changes suggested elsewhere in these forums (or someone's blog?) - can't find the link at the moment.
This is all on the same machine and I am a local admin on this machine.
Anyone seen this? Anyone have any suggestions. I'd appreciate any tips.
Regards,
Tom
<< LocalHost - Copy Message Text >>
TITLE: Connect to Server
------------------------------
Cannot connect to localhost.
------------------------------
ADDITIONAL INFORMATION:
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
Connect to SSIS Service on machine "localhost" failed: Class not registered.
------------------------------
Connect to SSIS Service on machine "localhost" failed: Class not registered.
------------------------------
BUTTONS:
OK
------------------------------
<< LocalHost - Show Technical Details >>
===================================
Cannot connect to localhost.
===================================
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
Program Location:
at Microsoft.SqlServer.Management.Smo.Enumerator.Process(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
Connect to SSIS Service on machine "localhost" failed: Class not registered.
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Application.GetServerInfo(String server, String& serverVersion)
at Microsoft.SqlServer.Dts.SmoEnum.DTSEnum.GetData(EnumResult erParent)
at Microsoft.SqlServer.Management.Smo.Environment.GetData()
at Microsoft.SqlServer.Management.Smo.Environment.GetData(Request req, Object ci)
at Microsoft.SqlServer.Management.Smo.Enumerator.GetData(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.Smo.Enumerator.Process(Object connectionInfo, Request request)
===================================
Connect to SSIS Service on machine "localhost" failed: Class not registered.
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Wrapper.ApplicationClass.GetServerInfo(String bstrMachineName, String& serverVersion)
at Microsoft.SqlServer.Dts.Runtime.Application.GetServerInfo(String server, String& serverVersion)
<<ExplicitMachineName - Copy Message Text >>
TITLE: Connect to Server
------------------------------
Cannot connect to TOM-H.
------------------------------
ADDITIONAL INFORMATION:
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
Connect to SSIS Service on machine "TOM-H" failed: Class not registered.
------------------------------
Connect to SSIS Service on machine "TOM-H" failed: Class not registered.
------------------------------
BUTTONS:
OK
------------------------------
<< ExplicitMachineName - Show Technical Details >>
===================================
Cannot connect to TOM-H.
===================================
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
Program Location:
at Microsoft.SqlServer.Management.Smo.Enumerator.Process(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
Connect to SSIS Service on machine "TOM-H" failed: Class not registered.
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Application.GetServerInfo(String server, String& serverVersion)
at Microsoft.SqlServer.Dts.SmoEnum.DTSEnum.GetData(EnumResult erParent)
at Microsoft.SqlServer.Management.Smo.Environment.GetData()
at Microsoft.SqlServer.Management.Smo.Environment.GetData(Request req, Object ci)
at Microsoft.SqlServer.Management.Smo.Enumerator.GetData(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.Smo.Enumerator.Process(Object connectionInfo, Request request)
===================================
Connect to SSIS Service on machine "TOM-H" failed: Class not registered.
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Wrapper.ApplicationClass.GetServerInfo(String bstrMachineName, String& serverVersion)
at Microsoft.SqlServer.Dts.Runtime.Application.GetServerInfo(String server, String& serverVersion)
View 7 Replies
View Related
Feb 19, 2007
I have a test environment set up at home with a small windows server 2003 Active Directory domain. I created a windows security group on the dc and added myself and another user to the group. I then use this group as a login for SQL Server and add the login to the sysadmin server role. This works exactly as I would expect on the Windows Server computer (which is also the Domain Controller) regardless of which computer I use to connect to this Windows Server computer. However, when I set up the exact same login on the local sql server instance of my client laptop running windows xp pro, the I get an error message (Login failed for user MYDOMAINdgolds...) when I attempt to connect to the local instance of SQL server, even though I am able to connect to the instance on the domain controller with no problems using this same client laptop under the same user account. The only way I am able to connect locally on the laptop under this account (which does not have local admin privileges on any box, for testing purposes) is to add the user account separately as a login, rather than as part of a group. I'm curious as to why being a member of a security group that is part of the sysadmin server role does not allow me to connect to the local instance of SQL Server on this client laptop. The windows server computer is running SQL2k5 Enterprise, and the client laptop is running SQL2k5 developer. Any insight into this would be appreciated.
Thanks,
Dave
View 12 Replies
View Related
May 14, 2007
hi ,
I am trying to connect to my local SQL server 2005 from "Server Explorer" but it is giving the error of "Remote Connectons" not allowed.
I am using "windows authentication" login.
My SQLExpress and SQLExpress browser are running from "SQL server configuration manager".
If i use a "App.Config" file to connect to database, the SQl connection can open and i can run the stored procedure.... but cannot access the database on my local machine.
Please help.
thanks for reply.
With regards,
Girish.
View 7 Replies
View Related
Jul 20, 2005
Anyone encounter differences between SQL2K EE and SQL2K Dev Editon?FAILS-----Machine_A [App Server] <-- JDBC --> Machine_ASQL2K_Dev_Ed..dbError: "com.inet.tds.SQLException: Connection refused"When app server on Machine_A attempts to connect to database onMachine_A the conenction is refused.SUCCEEDS---------Machine_A [App Server] <-- JDBC --> Machine_BSQL2K_EE..dbWhen app server on Machine_A attempts to connect to database onMachine_B the conenction succeeds and the app server runs normally.JDBC driver: com.inet.tds.TdsDriverjdbc:inetdae7:locahost:1433I don't believe the app server is exhausting the 10-connection max onSQL2K developer edition (there is a 10-connection limit imposed on thedeveloper edition, correct?)LB
View 2 Replies
View Related
Oct 17, 2014
I designed the AlwaysOn wrong, but every time we fail over from primary server to another server, my applications cannot connect because the sql logins cannot connect to their default databases. Once I run the command to link the login with the user in the default database then the users are able to connect. Did I do something wrong when designing AlwaysOn?
View 9 Replies
View Related
Aug 17, 2014
I use SQL Server 2012 Management Studio, SQL Server Data Tools and Visual Studio 2012 to deploy a data mining project.
I get the following error message: A connection can not be made. Make sure the server is running.
I am able to pick up the database using the details below:
Machine Name: NIRMALK01-PC
SQL Server: SQLEXPRESS
SQL EXPRESS: Running
SQL BROWSER: Running
SQL Agent: DISABLED
I can not find Analysis Services in services.msc
This is the error: Error 1
The project could not be deployed to the 'nirmalk01-pcsqlexpress' server because of the following connectivity problems : A connection cannot be made to redirector. Ensure that 'SQL Browser' service is running. To verify or update the name of the target server, right-click on the project in Solution Explorer, select Project Properties, click on the Deployment tab, and then enter the name of the server.
View 2 Replies
View Related
Feb 17, 2015
I had two servers, in which SQL Servers are installed. I created a alias for server
Server 1 : test1.sqlcloud.com (Alias name with port no other than 1433)
Server 2 : test2.sqlcloud.com (Alias name with port no other than 1433)
I can connect to the servers using the port. for ex server1 to server2 and viceversa using "test2.sqlcloud.com,port". But I could not connect to the server by only specifying the alias name ("test2.sqlcloud.com"). When I am connecting I am getting the following error.
"TITLE: Connect to Server
------------------------------
Cannot connect to test2.sqlcloud.com.
------------------------------
ADDITIONAL INFORMATION:
Connection Timeout Expired. The timeout period elapsed while attempting to consume the pre-login handshake acknowledgement. This could be because the pre-login handshake failed or the server was unable to respond back in time. The duration spent while attempting to connect to this server was - [Pre-Login] initialization=21020; handshake=0; (Microsoft SQL Server, Error: -2)
View 1 Replies
View Related
Feb 24, 2015
We have a monitor tool to monitor our SQL servers.The vendor has a script to grant permission to application account to SQL server so that they can do the monitoring.
I don't want to grant system admin role, but the script they have is very specific, the minimum is:
must be a member of db_datareader role on the msdb database
must have view server state permissions
view any definition
connection permission to master database
execute permission on the xp_readerrorlog stored procedure
connect permission to the msdb database
must be member of db_Datareader role in the msdb datab ase
connect permission to all databases.
The script given by vendor is as follows in the attachment.I don't like the last execute statement for if a new database is created, we have to remember manually add the monitoring acccount to that database.
I know in SQL 2014 it has a new feature of connect to any database, but unfortunately we are using SQL 2012 and 2008.
script to connect to any database but no need to add that each time we creates a new database.
View 5 Replies
View Related
May 6, 2015
I have very unusual question. I have seen a query that looks something like this:
SELECT A, B, C FROM 'LDAP://abc.def.com'
What exactly does this mean? Could such a query be executed in the SQL Server Management Studio? Where would such a table/database be actually located?
View 3 Replies
View Related
Sep 1, 2015
Enabled DAC and when connecting, I get a "Failed to connect to server ADMIN:SERVERINSTANCE"; however query window shows I'm connected on ADMIN:SERVERINSTANCE and checking tcp_endpoints + dm_exec_sessions, I'm definitely on the DAC.
View 1 Replies
View Related
Sep 15, 2015
Every time I start SSMS 2012 the "Connect to Server" box is partially obscured in that the top of it, the move bar can't be accessed. I've manually moved it using "alt+space" then "M" followed by the arrow keys, but it's getting annoying. Is there any way to change the initial start position of this box?
View 6 Replies
View Related
Apr 14, 2014
can i connect to SAP from SSRS and execute reports?
View 1 Replies
View Related
Apr 30, 2014
Currently we are unable to connect to analysis services and getting the below error
Element 'return' was not found.Line 5,position 2
What could be causing this?
View 1 Replies
View Related
May 6, 2014
I have an issue when connecting with application Intent=readonly when using Listener name. I can connect to the read only secondary with application Intent=readonly if I use the server name. It gives a host does not exist error when using listener. This happens only if I am using the application Intent keyword. I can connect for normal readwrite operation using listener name.
View 3 Replies
View Related
Nov 17, 2014
I am working with SSRS. I do have admin rights. I can connect to the url https://localhost/Reports and can create the new reports and subscription. Delete the reports and subscriptions.
But when I tried to connect to Reporting Services from SSMS, I am getting below error.
I used the windows authentication. It is showing that the user name or password is not valid or you don't have permission to access this server
I can connect to the database engine and Integration services but unable to connect to the Reporting services.
View 4 Replies
View Related
Jun 22, 2015
I am unable to connect to reporting server , services are running fine .Checked in logs and found
ERROR: Error initializing configuration from the database: Microsoft.ReportingServices.Library.ReportServerDatabaseUnavailableException: The report server cannot open a connection to the report server database. A connection to the database is required for all requests and processing. ---> System.Data.SqlClient.SqlException: A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)
How to resolve this ..
View 8 Replies
View Related
Sep 29, 2014
We are having 2012 Enterprise Edition,If I installed the Express Edition in other Client system is it possible to connect the Server system by using Express Edition....And Can we Connect the other server editions like Enterprise,Standard..etc by Express edition...
View 2 Replies
View Related
Feb 19, 2015
Version: SQL SERVER 2012 enterprise edition and SP2.
Due to one of the security reason, I have changed default port 1433 to another port number in configuration manger tools->protocols for MSSQLSERVER->TCP/IP --> IP ALL section mention another port number.
After restarted service, SQL SSMS able to connect server itself and new port number also LISTENING.
But SQL client SSMS not connected to one of the PC side after changing default port.
View 3 Replies
View Related
May 21, 2015
I create default instance on SQL Server 2012 Standard.
When I set it up, I changed instance id from 'mssqlserver', which is a default value, to 'new_instance_id'.
For some reason I want to connect to the instance with computername new_instance_id
Can I do it?
View 1 Replies
View Related
Jan 27, 2013
I can't connect to LocalDB using Visual Studio for Web Express 2012 or SMSS 2012 in a Windows 8 environment. LocalDB is installed and some things do work, however. The basic error is the very common:
Cannot connect to (LocalDB)v11.0.
ADDITIONAL INFORMATION:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.
(provider: SQL Network Interfaces, error: 50 - Local Database Runtime error occurred. Error occurred during LocalDB instance startup: SQL Server process failed to start.
In a command window, I can query the state of LocalDB an "info" parameter:
C:Program FilesMicrosoft SQL Server110ToolsBinn>sqlLocalDB info
SportsStore
TestOfLoc
v11.0
The first two are tests created at the command line using sqlLocalDB.I have reinstalled and repaired LocalDB several times with no errors reported.
View 9 Replies
View Related
Jul 31, 2014
I'm trying to configure a named instances of SQL Server 2012 SP2 to have specific IP addresses and listen to that IP on port 1433. Alongside this, I have the default instance running on a different IP and listening to that on port 1433.I've managed to get them configured so that they are reachable using the IP, and looking at the log for each they are listening correctly on that IP on port 1433; in addition, the default instance connects fine using the SERVERNAME.However, when I try and connect to the named instance using the SERVERNAME/INSTANCENAME syntax, I receive the following:-
"Cannot connect to SERVERINSTANCE.
Instance failure. (System.Data)"
Configuration for the TCP/IP protocol for that instance is as follows:-
Protocol Tab
Enabled= Yes
Keep Alive = 30000
Listen All = No
IP addresses Tab
IP1
Active = Yes
Enabled = Yes
IP Address = 10.1.1.1
TCP Dynamic Ports = 0
TCP Port = 1433
[code]...
The SQL Browser service is running and prior to switching off Listen To All, I could connect to the instance remotely using the instance name.
View 5 Replies
View Related
Dec 10, 2014
I decided to delete the encryption key.After that when I go to the reporting page, the report cannot connect to the datasource.
An error has occurred during report processing. (rsProcessingAborted)
Cannot create a connection to data source 'xxxxx'. (rsErrorOpeningConnection)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
What do I suppose to do?
View 0 Replies
View Related
Feb 24, 2014
When opening .sql files, I get a connect to database engine prompt every single time. how to stop this from prompting vs. just using my current active connection?
View 4 Replies
View Related
Jul 23, 2014
I am trying to setup a client alias to connect to a named instance on another server.
TITLE: Connect to Server
------------------------------
Cannot connect to fred.
------------------------------
ADDITIONAL INFORMATION:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
[URL]
The network path was not found
------------------------------
BUTTONS:
OK
------------------------------
I have set up the alias on the server and as expected it works. On the client side I have used the SQL Server Client Network Utility to configure the client side alias but no luck
I am using TCP/IP with a specific port ..
By the way the SQL is SQL Server 2012 Ent and the O/S is Windows 2012 R2 minshell
View 9 Replies
View Related
Sep 21, 2015
I have an SQL Server 2012 with SSIS installed on Windows Server 2008 R2 Core. I'd like to connect remotley to SSIS but I receive the following error. 'The RPC server is unavailable.'
View 2 Replies
View Related
Jul 9, 2015
In our packages, we are using Microsoft SQL Server Native Client 10.0 provider to connect our SQL Server 2008 DBs, which is working fine till we are migrating 2008 DB server to 2012. after the upgrade, some of our packages are working fine, some are not. I'm just curiuos to know will the
old provider(Microsoft SQL Server Native Client 10.0) will work fine for connecting 2012 DBs? or I need to update all our packages to re-point to new 2012 Provider.
View 5 Replies
View Related
Sep 21, 2015
The following error occurred when trying to connect to 2012/2014 SSIS Server using SSMS remotely. Local connection works fine.Using the info from below link does not resolve the problem. Permissions are granted through DCOM. If this cannot be resolved, packages will have to stored on filesystem instead.
URL....Connecting to the Integration Services service on the computer "" failed with the following error: "Class not registered".
This error can occur when you try to connect to a SQL Server 2005 Integration Services service from the current version of the SQL Server tools. Instead, add folders to the service configuration file to let the local Integration Services service manage packages on the SQL Server 2005 instance.
View 6 Replies
View Related
Mar 9, 2004
I have always connected to my MS SQL DB's through a remote connection, like this:
<%
Dim oConn, oRS, sSQL
Set oConn = Server.CreateObject("ADODB.Connection")
oConn.Open "Driver={SQL Server};" & _
"Database=mydb;" & _
"Server=myservername;" & _
"UID=mylogin;" & _
"PWD=mypwd"
%>
Is there a way to connect to an MS SQL DB locally with VBScript... I have seen code blocks use the keywork localhost... does that have something to do with it?
View 3 Replies
View Related
