I have been working with a BI colleague to access the readable secondary through SSRS. For some reason it keeps complaining that ApplicationIntent is not recognized keyword. I am starting to think it's something to do with the driver for SSRS.
View 1 RepliesIn always on under availability group server name properties can see the option Readable Secondary. In that for secondary server the Readable Secondary Option is YES and for Primary it is Read-Intent. I believe Read-Intent allows only read only connections and YES allows all user connections.
View 0 Replies View RelatedIn always on under availability group server name properties can see the option Readable Secondary. In that for secondary server the Readable Secondary Option is YES and for Primary it is Read-Intent. I believe Read-Intent allows only read only connections and YES allows all user connections.
What exactly it means for the primary and secondary?
i have created a new login in primary server and provided dbowner permission to primary db.how do i transfer this login to secondary server and assign the same permission to secondary db ?
View 2 Replies View Relatedin my secondary server the database which is in restoring state , when i checked in always on dash board "This secondary database is not joined to the availability group" ,
View 3 Replies View RelatedWhile configuring SQL Server 2012 Cluster with Always on, why do we need two secondary replicas.
The attached link will describe the actual query. [URL] ....
I am after T-SQL code which will simply load the next T-log backup file from a network share folder to a warm standby db on a secondary server.What is needed is a Third server (server x), to participate in log shipping (MULTIPLE TARGETS).
Primary SERVER (SERVER A)
Secondary SERVER (SERVER B) Log shipped to via GUI.
THIRD SERVER (SERVER X) which will contain the same log shipped db from server A.
This will simply restore the logs from a network share to keep the db up to date.
"If we fail over a SQL AG group on a failover cluster from one node to another making the secondary the new primary, is there any reason why we would have to fail it back over to the old primary node?"
View 2 Replies View Related2 Boxes in HA, identical hardware (VMs) and both utilising identical storage systems (Nimble SANs).Was needing to do a copy only backup of a few databases for an escrow environment we have, so decided to perform this on the secondary box.Small ~10GB ish database first, seemed to be really slow, so opened resource monitor and noticed that disk read / write was getting limited to about 15MB/s so took a little while (the big one is over 1TB)
Tried this again on the primary it was done in seconds disk rate in the order of 250MB/s (same settings re compression etc).. I decided to make a copy of the backup file on the secondary, the copy disk to disk went in the region of 150MB/s , so it appears that SQL Server is the bottleneck?
How can I create secondary database on the server i.e. .ndf file?
View 2 Replies View RelatedSQL is generating dump every 1 min with error
EXCEPTION_ACCESS_VIOLATION reading address 0000000000000020 at
Server is running SP2 CU2.
Environment:-
Windows 2012 R2,
SQL 2012 (Primary Replica)
SQL 2012 (Seondary Replica)
SQL 2012 (Secondary Replica over WAN site)
There are database replicating on three SQL servers. WAN line is having performance issue because of limited bandwidth I have to remove SQL secondary replica over WAN site temporarily and add it again later when the WAN line is upgraded with between bandwidth What is the best practice to remove secondary replica and replicating database and add later from SQL management studio without interruptions on databases?
I have an AlwaysOn Availability group configured between 2 nodes (Synchronous)
Automatic failover was working fine until recently
I can failover between the nodes manually but automatic failover doesn't seem to be working. In my earlier test, I would shut down the SQL Service on the primary and within seconds, the secondary replica would take over. Recently I have performed the same test and the secondary replica enters the resolving state and the DB in unavailable.
I have tried everything here: [URL] ....
The only change I made was changing the availability mode from Synchronous to Asynchronous - Could that be the cause?
Looking for info on ole/requirement of primary and secondary replica under SQL Server 2012 AlwaysOn.
View 4 Replies View RelatedDo we have any way to insert,update,delete data from one table and update the changes onto second table. Also, while updating records into second table, can the data be encrypted.
I tried using view and it can insert, update, delete without any issues. But if i tried to encrypt any fields after inserting data into view, I am unable to do it.
For ex:
Table A:
EMPID LNAME FNAME
1 ABC DEF
2 DCE SKL
3 CKL DOP
Expecting output: by scrambling Lname FILED
Table B - vIEW TABLE
EMPID LNAME FNAME
1 CBD DEF
2 ECD SKL
3 LKC DOP
Tried below methods
CREATE Tableb_vw ON TableB
Instead of Insert
AS
Begin
update TableA
set Lname = (
--UserName = 'User' + substring(convert(varchar(32), UsersTrID), 1, 8)
SELECT REPLACE(LEFT(Lname, 2), '''', 'Z') AS LNAME)
FROM TableA
end
What I would like to get:
1. Can we update base tables and encrypt second table data while inserting or updating data
2. If not supported using base tables, can we do using views to encrypt view data [Some fields]
I have a SP that runs on the primary in 18 min and 45 min on the secondary( poorly written cursor,trying to fix it).Both machines are Exactly the same.I ran them in the middle of the night when no one was on the Sec. Node as we use it for reporting.
PLE: 7,000+
AVG Disk sec/write below .01
AVG Disk sec/read below .01
CPU below 5%
both machines set a max dop 4
Secondary replica database(setup in async mode) of AlwaysON went in "restricted mode" during weekly reindex operation.
So I have tried below steps
1) Executed following statement on the same secondary replica database where the issue exists
alter database <DBNAME> set multi_user with rollback immediate
but it failed with the error saying "The operation cannot be performed on database "dbname" because it is involved in a database mirroring session or an availability group. Some operations are not allowed on a database that is participating in a database mirroring session or in an availability group. ALTER DATABASE statement failed."
2) Primary database is multi_user but still tried following command on primary replia database(thinking it will replicate)
alter database <DBNAME> set multi_user
but no luck. The secondary alwaysON database shows (synchronizing) as the alwaysON is set in async mode but the command doesn't replicate across secondary
so we are left with the only option to re-setup alwaysON but I want to avoid it as database size is huge..
any other options or am I missing anything?
MCP,MCDBA(SQL 2000),MCTS(SQL 2005),MCITP(SQL 2005)
What happens when an automatic failover occurs, in a two server AlwaysOn Availability Group configuration, where the secondary replica is configured as read-only?
Will it only allow read-only connections, or will it become read-write and can accept INSERT, UPDATES and DELETES when assigned the new role as Primary?
Is it correct that adding a third server/node, that just acts as passive and should be used for automatic failover, to support true HADR, would NOT need another license .. and that licenses would only be required for the previous Primary and Secondary (Read-Only) replicas?
I was working on a job to send me info each morning about database file free space and was noticing some odd things when looking at the log file VLFs for one of my databases in an AlwaysOn availability group.When I run DBCC LOGINFO on the secondary replica for this database, I get what I expect and most VLFs have a status of 0 (indicating the VLFs are reusable or unused). When I run DBCC LOGINFO on the primary replica, all of the VLFs have a status of 2 (active or recoverable).
Since log backups on the secondary replica in AlwaysOn still truncate the log in the primary replica, I would expect that the VLFs in the primary replica would also be mostly in a reusable or unused state. My log file sizes are the same size on each server and my backups are completing successfully. what might be causing the VLFs on the primary replica to have a status of 2 in DBCC LOGINFO when taking log backups from the secondary replica?
I checked the server and found that LS restore job failing and Backup and copy jobs running fine without any issue. and also observed that Copy folder the trn file existing on secondary server. i try to restore trn file im getting the error. and observed that last log backup file that it restored at the secondary database on May2nd,2015.
2015-06-02 12:25:00.72*** Error: The log in this backup set begins at LSN 761571000000022500001, which is too recent to apply to the database. An earlier log backup that includes LSN 721381000002384200001 can be restored.
From Restore job histort details below.
Message
2015-06-02 12:25:00.72*** Error: The file 'xxxx\_20150530104503.trn' is too recent to apply to the secondary database 'database'.(Microsoft.SqlServer.Management.LogShipping) ***
2015-06-02 12:25:00.72*** Error: The log in this backup set begins at LSN 761571000000022500001, which is too recent to apply to the database. An earlier log backup that includes LSN 721381000002384200001 can be restored.
RESTORE LOG is terminating abnormally.(.Net SqlClient Data Provider) ***
2015-06-02 12:25:00.73Searching for an older log backup file. Secondary Database: 'database'
2015-06-02 12:25:00.73*** Error: Could not find a log backup file that could be applied to secondary database 'database'.(Microsoft.SqlServer.Management.LogShipping) ***
2015-06-02 12:25:00.74Deleting old log backup files. Primary Database: 'database'
In my environment always on is there. Today I observed that primary server fail over to secondary server .now the secondary server acting as primary role.
Can I know when is fail over is happened and who did the fail over. Is there any script to find this?
I've configured log shipping to use for DR purposes. I'm concerned that the physical location of the secondary is mis-reported by SQL Server Management Studio.
Viewing the secondary location (with Studio DB_name Properties Files) shows the path of the primary DB (I expected it to show the path of the secondary).
This SQL command shows the correct/actual paths of both primary and secondary DB's when run on their host servers.
SELECT name, physical_name AS CurrentLocation, state_desc FROM sys.master_files
Is this just cosmetic?
Here is an Example of how the Studio shows the incorrect path for the secondary.
Example:
(Primary) servername=prodSrv, DBname=aquaDB, Actual_Path=G:aquaDB, SQL-studio-Properties-Path=G:AquaDB, sys.master_files Path=G:AquaDB,
Log shipped to
(Secondary / Read Only) servername=DRSrv, DBname=aquaDB, Actual Path=F:aquaDR, SQL-studio-Properties-Path=G:AquaDB(WRONG), sys.master_files Path=F:aquaDR
I know now that AlwaysOn feature HAS to be installed/configured on a Windows Clustering environment, BUT the secondary replicas, like the Disaster recovery replica residing in a different Data Center HAS to be also in a Windows Clustering environment or can it reside on a SINGLE SQL Server INSTANCE?.
View 6 Replies View RelatedI have created a Test SSIS Package within BIDS (VS 2K8, v 9.0.30729.4462 QFE; .NET v 3.5 SP1) that connects to our Test Listener.
There is only 1 Connection Manager Object, and OLE DB Provider for SQL Server.
The ConnectionString lists: Provider=SQLOLEDB.1;Integrated Security=SSPI
The Test Connection within BIDS works.
The Package Control Flow has just 1 Object, and Execute SQL Task that performs an Exec on an SP that contains only a Select (Read).
The Package runs within BIDS.
I've placed this Package within a Job on the Primary Node. Ive run the job successfully using 32 bit runtime on and off. The location of the file on the server happens to be on a share that resides on what is currently the Secondary Node.
When I try to run the exact copy of this Job on the Secondary Node (Which has been Set up for Read All Connections; Yes), I get an error, regardless of the 32 bit runtime opiton. At this point, the location of the file is on the Secondary Node.
The Error is: "Login failed for user 'OurDomainAgent_Account'".
The Agent is a member of NT ServiceSQLServerAgent on both instances, and that account is a member of SysAdmin. Adding the Agent account as well, and giving that account SysAdmin, makes no difference either.
Why can't I get this to work?
I received an alert from one of my two secondary servers (all servers are running 2012 SP1):
File 'E:SQLMS SQL ServerMSSQL11.MSSQLSERVERMSSQLDATAMyDatabaseName_DateTime.tuf' is not a valid undo file for database 'MyDatabaseName (database ID 8). Verify the file path, and specify the correct file.
The detail in the job step shows this additional information:
*** Error: Could not apply log backup file 'MyDatabaseName_DateTime.trn' to secondary database 'MyDatabaseName'.(Microsoft.SqlServer.Management.LogShipping) ***
*** Error: Table error: Page (0:0). Test (m_headerVersion == HEADER_7_0) failed. Values are 0 and 1.
Table error: Page (0:0). Test ((m_type >= DATA_PAGE && m_type <= UNDOFILE_HEADER_PAGE) || (m_type == UNKNOWN_PAGE && level == BASIC_HEADER)) failed. Values are 0 and 0.
Table error: Page (0:0). Test (m_freeData >= PageHeaderOverhead () && m_freeData <= (UINT)PAGESIZE - m_slotCnt * sizeof (Slot)) failed. Values are 0 and 8192.
Starting a few minutes later, the Agent Job named LSRestore_MyServerName_MyDatabaseName fails every time it runs. The generated log backup, copy, and restore jobs run every 15 minutes.
I fixed the immediate problem by running a copy-only full backup on the primary, deleting the database on the secondary and restoring the new backup on the secondary with NORECOVERY. The restore job now succeeds and all seems fine. The secondaries only exists for DR purposes - no one runs reports against them or uses them at all. I had a similar problem last weekend on a different database that is also replicated between the same servers. I've been here for over a year, and these are the first instances of this problem that I've seen. However, I've now seen it twice in a week on the same server.
I have a scenario where a customer is going to be using Log Shipping to the DR site; however, we need to maintain the normal backup strategy on the current system. (i.e. Nightly Full, Every 6 Hour Differential and Hourly Transaction Log backup)I know how to setup Transaction Log Shipping and Fail-over to DR and backup but now the local backup strategy is going to be an issue. I use the [URL] .... maintenance solution currently.
Is it even possible to do regular backups locally keeping data integrity for your backup strategy with Transaction Log Shipping enabled?
Currently we are using Custom Delivery Extension for SSRS 2008R2 We are planning to move it SSRS2012
My Question is: Whether we can use the same Code used for SSRS2008R2 to SSRS2012?
if not what code changes we should do?
Hi all,
I'm trying to create a report out of db2 database. I've downloaded OLEDB connector for DB2. AM succusscully getting the connection established and able to preview data using simple select statement. But when i try to desing a table using the dataset and preview it, it thorws the following error
Error:
"An internal network library error occurred. A network level syntax error has occurred. SQLSTATE:HY000,SQLCODE: -379"
Can anybody tell me what went wrong? do i need to any configuration settings to preview data from DB2 database?
Hello
We have set up Log shipping between Primary and Secondary DB. The secondary DB is right now option: Standby/Read-Only. I can not take Backup of Secondary DB now.
Shall we disable Log shipping and change the DB Option to Multi-user mode and take backup? or any different method, without disabling log shipping?
please advice. Thanks in advance.
Jay
While connecting to Reporting Services from management studio I'm getting following error...
I'm having SQL Server 2005 with Sp2.
OS is Vista.
===================================
Cannot connect to ServerName.
===================================
Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'.
The request failed with the error message:
--
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD><TITLE>IIS 7.0 Detailed Error - 500.0 - Internal Server Error</TITLE>
<META http-equiv=Content-Type content="text/html; charset=utf-8">
<STYLE>
BODY { FONT-WEIGHT: normal; FONT-SIZE: 0.7em; COLOR: black; FONT-FAMILY: "Verdana" }
B { MARGIN-TOP: 0px; FONT-WEIGHT: bold; COLOR: black; FONT-FAMILY: "Verdana" }
H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red }
H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon }
PRE { FONT-SIZE: 0.9em; FONT-FAMILY: "Lucida Console" }
P { margin-top: 5pt }
</STYLE>
</HEAD>
<BODY bgColor="white">
<SPAN>
<H1>Server Error in Application "Default Web Site/ReportServer"</H1>
<HR width="100%" color="silver" SIZE="1">
<H2><I>HTTP Error 500.0 - Internal Server Error</I></H2>
</SPAN>
<FONT face="Arial, Helvetica, Geneva, SunSans-Regular, sans-serif">
<P><B>Description:</B> <b>This application is running in an application pool that uses the Integrated .NET mode. This is the preferred mode for running ASP.NET applications on the current and future version of IIS.<br><br></b><b>In this mode, the application should not specify ASP.NET handler mappings in the <system.web>/<httpHandlers> configuration section. Instead, it should use the <system.webServer>/<handlers> configuration section to configure ASP.NET handler mappings. You have the following options:</b><h3>1) Migrate the application to work with the Integrated .NET mode (PREFERRED).</h3> You can migrate the application configuration, including the contents of the <httpHandlers> configuration section, by using the following from a command line window (the window must be running as Administrator): <BR><BR>
<b>%systemroot%system32inetsrvAPPCMD.EXE migrate config "Default Web Site/ReportServer"</b><BR><BR>
After you migrate your application, it will run in both Classic and Integrated .NET modes, as well as on downlevel platforms.<h3>2) Move this application to an application pool using the Classic .NET mode.</h3>You can move the application to an application pool that uses the Classic .NET mode by using the following from a command line window (the window must be running as Administrator):<BR><BR>
<b>%systemroot%system32inetsrvAPPCMD.EXE set app "Default Web Site/ReportServer" /applicationPool:"Classic .NET AppPool"</b><BR><BR>
Alternatively, you can use any other application pool on your system that is running in the Classic .NET mode. You can also use the IIS Administration tool to move this application to another application pool.<BR><BR>
<b>It is preferred that you migrate this application by using option 1 to take advantage of the benefits provided by the Integrated .NET mode.</b>
<P><B>Error Code:</B> 0x80070032
<P><B>Notification:</B> BeginRequest
<P><B>Module:</B> ConfigurationValidationModule
<P><B>Requested URL:</B> http://lt-bic-002:80/reportserver/ReportService2005.asmx
<P><B>Physical Path:</B> C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesReportServerReportService2005.asmx
<P><B>Logon User:</B> Not yet determined
<P><B>Logon Method:</B> Not yet determined
<P><B>Handler:</B> AboMapperCustom-2802673
<P><B>Most likely causes:</B> <ul> <li>IIS received the request; however, an internal error occurred during the processing of the request. The root cause of this error depends on which module handles the request and what was happening in the worker process when this error occurred.</li> <li>IIS was not able to access the web.config file for the Web site or application. This can occur if the NTFS permissions are set incorrectly.</li> <li>IIS was not able to process configuration for the Web site or application.</li> <li>The authenticated user does not have permission to use this DLL.</li> <li>The request is mapped to a managed handler but the .NET Extensibility Feature is not installed.</li> </ul>
<P><B>What you can try:</B> <ul> <li>Ensure that the NTFS permissions for the web.config file are correct and allow access to the Web server's machine account.</li> <li>Check the event logs to see if any additional information was logged.</li> <li>Verify the permissions for the DLL.</li> <li>Install the .NET Extensibility feature if the request is mapped to a managed handler.</li> <li>Create a tracing rule to track failed requests for this HTTP status code. For more information about creating a tracing rule for failed requests, click <a href="http://go.microsoft.com/fwlink/?LinkID=66439">here</a>. </li> </ul>
<A href="http://go.microsoft.com/fwlink/?LinkID=62293&IIS70Error=500,0,0x80070032,6000">
<P><B>More Information...</B>
</A> This error means that there was a problem while processing the request. The request was received by the Web server, but during processing a fatal error occurred, causing the 500 error.
<P><B>Microsoft Knowledge Base Articles: </B> <ul><li>294807</li></ul>
<HR width="100%" color="silver" SIZE="1">
<B>Server Version Information:</B> Internet Information Services 7.0.
</FONT>
</BODY>
</HTML>
--. (Microsoft.SqlServer.Management.UI.RSClient)
------------------------------
Program Location:
at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.SqlServer.Management.UI.RSClient.RSClientConnection.CreateConnection(String connectionString)
at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.CreateConnectionObject()
at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.RSTypeImpl.GetConnectionObject(UIConnectionInfo ci)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.RSType.GetConnectionObject(UIConnectionInfo ci)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
Hi all,
I need to connect with the Oracle Database for the Reports application. But i am unable to do the same. I am getting errors like ORA-12514,ORA-06401 while trying it.
(1) Please tell me about any extra settings need to be done in the listener.ora,tnsnames.ora for getting SSRS connected with the Oracle DB.
(2) Tell me the format of the connection string to be used for the connection with the Oracle database.
(3) Also which datasource has to used.. Oracle / Microsft OLEDB provider for Oracle for the Same.
Please help me with these issues.
With Thanks
M.Mahendra
Sorry if this is old problem, newbie to these forums.
I have SSRS 2005 trying to connect to cube on AS2000. Getting an error of
"Unable to recognize the requested property ID 'ReturnCellProperties'".
Did google a little and tried a suggested workaround of adding ConnectTo=8.0
to the datasource with no resolution.
1. Has anyone been able to get it to work ?
2. Would it be possible to have SSRS2005 connect to SSAS2005 while the cube points to the tables on sql server 2000 ?
All servers/software are at the latest SP levels including hotfixes.
(windows 2003 servers sp1, sql200 sp4, sql2005 sp2 + hotfix)
Any help or suggestions are appreciated.
thanks,
marlyn
I'm using Reporting Services 2005 and I can view the report in Visual Studio using the preview tab. After I deploy the report and datasource, when I try to view the report on the report server is says that I must have Oracle Client version 8.xx or higher.
I have the same Oracle Client Version on my local machine and the Report Server with the same DataSource name set up for Oracle on both machines.
Any ideas why this would work on my local machine but not the Report Server?