I tried this:
SELECT Convert(smalldatetime,Round(Convert(float,(dbo.fnDateOnly(getDate())))+16.0000000/24.0000000,6))
Result: 2015-09-04 16:00:00
It works (FnDateOnly strips the time).
Is there a more efficient way ?
I'm trying to create a report which will give me a break down of how many unique vehicles have been seen between two dates via a 15 minute interval and what Lane they were seen. My current script looks like this
SELECT l.Name [Name], count(l.Name) Total, p.Created
FROM PlateReads p
inner join Lanes l on p.Lane_ID = l.ID
where LicencePlate in (Select Plate from LPRnet_MelAir_C.dbo.TempVehiclePlates)
group by Name
Name being the Lane they were in and the Total being the amount of times a unique vehicle has been seen and p.Created being the date they were seen (thats what I need the interval powered off)
Ideally the output would look like this
16/03/201408:00 to 08:15Bus Lane 15
16/03/201408:00 to 08:15Elevated Road150
16/03/201408:00 to 08:15Public Pickup75
16/03/201408:15 to 08:30Bus Lane 13
16/03/201408:15 to 08:30Elevated Road120
16/03/201408:15 to 08:30Public Pickup55
All the way to 12/04/2014
I’ve got it so it says Lane and Count just can’t get the interval part
Time Interval for hour and 30 minutes
--------------------------------------------------------------------------------
Hi Everyone
I Have column in sql server databas as "HHMMSS" and data as and i am doing a substring to get values for hours and minutes. since my calculations based on hour interval and 30 minutes interval
for ex: Now i want to show all the transaction done b/w 6 to 7 am or pn.
and for 30 minutes interval i have get the calculation as transactions done b/w 6:00 to 6:30 and 6:30 to 7:00 either it's am or pm. now how i can write my sql statements that calculates hour and 30 minutes intervals
HHMM
-------------
06:43
09:26
09:26
11:58
12:25
18:17
20:45
00:43
00:53
16:47
Thanks
Phani
I have a datetime field used to store a date of birth. When inserting the date of birth into the table it works fine. But when the date of birth is in the month of October, it takes an hour off. For example, if the date is 04-OCT-1993, it inserts as 03-OCT-1993 23:00.
It only happens for dates in October. It's being inserted via a .Net table adapter. It just so happens that October is the month that daylight savings kicks in parts of Australia (an hour is added), but I think this must be a coincidence.
I have two tables:
Club - Stores all clubs (id_club, name)
Match - Store all matches (id_club1, id_club2, dateMatch, result)
The match has club 1 and club 2.
And I Have to select all matches that clubs played with an interval less than three days between games.
This is my code:
SELECT DISTINCT a.*
FROM
Matches a
INNER JOIN
Matches b ON
[Code] ....
I tried too:
select *, DATEDIFF(day, m1.date, j2.data) from matches m1, matches m2
where abs(DATEDIFF(day, m1.dateMatch, m2.dateMatch))<3
and (m1.id_club1=m2.id_club2)
But it doesn't working. Because I have two clubs in a row. It's so difficult.
I have a request where i would like to get the start date/time and end date/time and flag (with an int) which hours (24 hour clock) have values between the two dates. Example car comes into service on 2013-12-25 at 0800 and leaves 2013-12-25 at 1400 the difference is 6 hours and i need my table to show
Column: Hour_6 Value: 0
Column: Hour_7 Value: 0
Column: Hour_8 Value: 1
Column: Hour_9 Value: 1
Column: Hour_10 Value: 1
Column: Hour_11 Value: 1
Column: Hour_12 Value: 1
Column: Hour_13 Value: 1
Column: Hour_14 Value: 0
As i'm working away at it i'm trying to figure out how i could use a Time Dimension table for this but dont really see much. So far i have the difference between the two times in hours (hour_diff) and the start hour (min_hour) so i would like to do something where i update the first hour (min_hour) and update columns based on the numbers of hours (hour_diff)
I am using MS SQL 2012 and have a pretty simple table dbo. Migration Breakdown with sample data as follows.
DepartDateTime ZoneMovement
2015-06-26 14:00:00.000 6 to 4
2015-06-26 14:00:00.000 11 to 7
2015-06-26 15:30:00.000 9 to 6
2015-06-26 21:00:00.000 7 to 3
2015-06-27 08:01:00.000 7 to 4
[code]....
What I am trying to do is parse the data set to find out when we have more than three like movements ex. 3 to 10 within ANY rolling 72 hour period. I have looked at the SQL Window Functions OVER with a ROW | RANGE subclause, but I can't find out how to tackle this rolling 72 hour business.
I have a table that is recording hits to a website. Everytime someone views a page, the datetime of the hit is recorded in a field called hit_date_time. I would like to be able to come up with a query that will show how many hits occured on a given day or given days, broken down by hour.
The resulting table for two days would look something like:
Time Hits
1/1/01 12:00 1
1/1/01 1:00 23
1/1/01 2:00 54
1/2/01 1:00 15
1/2/01 2:00 14
I can't seem to figure out how to write the query so that I can take into consideration the date and hour of the event so that I can count it.
Thanks,
Eron
I have a table with the following columns employeeSessionID, OpDate, OpHour, sessionStartTime, sessionCloseTime. I need to see how many users remain active per hour. I can calculate how many logged in per hour, but I am stumped on how to count how many are active per hour. I have a single table that stores login data. I have created a query that pulls out the only the data needed from the table into a temp table using this query. Also note it is possible that the sessionCloseTime is null if the device has not been logged out this would need to be counted a active.
TABLE NAME #empSessionLog Contains the time stamp data OpDate, sessionStartTime and sessionCloseTime.
OpDatesessionStartTimesessionCloseTime
2015-01-202015-01-20 14:32:59.1302015-01-20 14:33:14.6299166
2015-01-202015-01-20 06:58:33.7302015-01-20 15:27:16.9133442
2015-01-202015-01-20 09:56:22.8402015-01-20 17:56:29.7555853
2015-01-202015-01-20 05:59:18.6132015-01-20 14:05:19.0426707
[code]....
can see how many sessions logged in per hour with the following statement:
SELECT
opDate,
FORMAT(DATEPART(HOUR, sessionStartTime), '00') AS opHour,
Count(*) AS Total
FROM #empSessionLog
Group BY opDate, FORMAT(DATEPART(HOUR, sessionStartTime), '00')
Order BY opDate, FORMAT(DATEPART(HOUR, sessionStartTime), '00') ASCResults:
opDateopHourTotal
2015-01-20041
[code]....
Where I am stuck is how do I count the sessions that remain active per hour until the session is closed with the sessionCloseTime.
Hi Guys
how do I create a dates table which contains a list of all the possible dates in sql server 2005??
Thanks
Hi,I'm a newbie to sql server and this may be a really dumb question forsome you. I'm trying to find some examples of sql server triggers thatwill set columns (e.g. the created and modified date columns) if the rowis being inserted and set a column (e.g. just the modified date column)if the row is being updated.I know how to do this in oracle plsql. I would define it as a beforeinsert or update trigger and reference old and new instances of therecord. Does sql server have an equivalent? Is there a better way to dothis in sql server?Thanksericthis is what i do in oracle that i'm trying to do in sqlserver...CREATE OR REPLACE TRIGGER tr_temp_biubefore insert or updateon tempreferencing old as old new as newfor each rowbeginif inserting then:new.created_date := sysdate;end if;:new.modified_date := sysdate;end tr_temp_biu;
View 1 Replies View RelatedHi
I want to create a table that has a datetime column, data type=datetime and I want the date to start form 01/01/2004 00:00:00 to 01/01/2008 00:00:00 the increment will be by minute like
01/01/2004 00:01:00
01/01/2004 00:02:00
01/01/2004 00:03:00 and so on up to 01/01/2008 00:00:00
I will use this time dimension in bussiness objects.
please provide me with the SQL sript to do this.
Is there a way to make a single insert (in a loop) and take system dates and insert them in different languages without making a new loop for each language.
Example
Create table dateLanguage(
monthName nvarchar(20),
monthNameEs nvarchar(20),
monthNameFr nvarchar(20),
MonthNamePt nvarchar(20)
)
So for example
January,
Enero,
Janvier,
janeiro
I am designing a database to store data from a leak tester.
We want to display the results between dates, I mean, the results of the leaking test are going to be stored as well as the datetime in which they have been performed.
ID (int)
RESULT (float)
TS (datetime)
The query will be, of course:
SELECT * FROM TABLE Where TS BETWEEN DT1 and DT2
This table is growing by 10000 rows a day, it is possible that in a year getting the values between two dates became impossible.
Using a index with a datetime field sounds like a crazy idea.
SELECT
SUM(((CASE WHEN
o.date>= a.activity_date, other filter condition, other filter condition
THEN
(select coalesce(d.balance,d2.balance) from drawtable d where coalesce(d.date, d2.date) < a.activity_date order by d.date desc limit 1) - ( select coalesce(d.balance, d2.balance) from drawtable d where coalesce(d.date, d2.date) = interval 'current date'
else end ))
from
emailtable a
LEFT JOIN opportunity o
left join drawtable d
left join drawtable d2
etc
The tricky part is I'm joining that same table twice.....would this be better in a max/min case when statement?
I have a simple script where I want to pull GLAcct, GLDesc and Amounts by Period. I want my results to look like attached snip.
I tried playing around with the dates; however, I'm receiving errors. Just to note that when I ran for 07/01/14 - 07/31/14 with the transaction date in where clause I was able to retrieve the correct results. Now I want to expand to get a view set up for the whole year....automation!
select
gl_account.id as GLAcct,
gl_account.descr as GLDesc,
sum(gl_ledger.amount_n) as Net
from gl_account
[Code] ....
I have a dataset that contains an EmployeeID, StartDate, EndDate, and Location. Each record tells me at which location and employee was during a payroll period (fortnightly). So the data looks like:
EMP_KEYSTART_DTEND_DTLOCATION
120130117201301318103
120130117201301318103
120130131201302143354
120130131201302148103
220130117201301311234
220130131201302144567
120130214201302283354
220130214201302281234
Employees can be at multiple locations during the two weeks. They can work at one location, stop working there, start working somewhere else, and then maybe go back to their old location. There are duplicate records here as each employee can be at the same location multiple times during the two week period. What I need to capture is the actual start and end date of an employee at each location for each 'assignment'. An assignment is defined as a continual period of employment at a location with gaps of no less than 4 days - if there is a gap of more than four days then that is classed as a new assignment.
I have a customer history table with the follow structure and data:
CustomerID Tier StartDate RecordStatus
123 A 01/01/2013
I have a customer history table with the follow structure and data:
CustomerID Tier StartDate RecordStatus
123 A 01/01/2013 1
123 A 03/01/2013 0
123 B 03/01/2013 1
123 B 06/01/2013 0
123 A 08/01/2014 1
456 C 02/01/2014 1
CREATE TABLE TEMPHISTORY(
CUSTOMERID VARCHAR(11),
TIER VARCHAR(10),
STARTDATE DATE,
RECORDSTATUS TINYINT)
[Code] .....
The RECORDSTATUS value of 1 means the record is active. A corresponding record of the same CustomerID, Tier. in startdate chronology, with a value of 0 indicates that the previous record with the status of 1 has now terminated and the startdate of the record with recordstatus of 0 is the start date of the termination of the previous record, or better stated, the end date of the previous record.
What I need to do is re-record the above data the startdate of each terminated record become an enddate for the previous record, minus 1 day, as follows:
CUSTOMERID TIER STARTDATE ENDDATE
123 A 01/01/2013 02/28/2013
123 B 03/01/2013 05/31/2013
123 A 08/01/2014 NULL
456 C 02/01/2014 NULL
I've just restored a DB from one server to another. Part of the DB is an assembly used in a Function that unencrypts some data held in a Varbinary(Max) column.
When I execute it on the original server it works fine across all rows of the table, when I execute it against the new server it fails because it's seeing dates in MM/DD/YYYY format, it works if the day of the month is less than 13, but obviously the date would be wrong!
Setting the DATEFORMAT to MDY prior to executing the function has no effect either.
It's the same DLL in the same location, the SQL Server settings as returned by DBCC USEROPTIONS() are identical.
The SQL Server editions and Window OS are the same
New Server
Microsoft SQL Server 2012 - 11.0.2100.60 (X64)
Feb 10 2012 19:39:15
Copyright (c) Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
Old Server
Microsoft SQL Server 2012 - 11.0.2100.60 (X64)
Feb 10 2012 19:39:15
Copyright (c) Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: )
I'm thinking the DLL is being affected by some setting either in the Windows OS or a SQL Server setting ...
I have a table (Event_Table) like:
EmployeeID, CustomerID, Date
1, 11, 2014-11-11
2, 13, 2014-12-10
1, 11, 2014-12-21
2, 13, 2015-01-11
1, 11, 2015-03-02
And now I would like to have a summary with a unique Employee/Customer combination and 3 Date columns like:
EmployeeID, CustomerID, Date1, Date2, Date3
1, 11, 2014-11-11, 2014-12-21, 2015-03-02
2, 13, 2014-12-10, 2015-01-11
Dates should be arranged with the first date in Date1, the next in Date2 and the third in Date3 (if there are forth and more dates I don´t care)
I have three tables: EMP (ID, NAME), EMPDATE (ID, STARTDATE, ENDDATE), YEAR(YEAR)
I would like to get the most recent date within a given year per each EMP? For example, EMPID 1 can be enrolled in many programs, each program has start end dates. I need to list the most recent date an employee was enrolled (max date between START AND END DATE which ever is most recent enrollment) for a given year. For example, for 2014 his/her most recent enrollment should be 10/23/2014 for year 2014 and 2013-10-24 for year 2013.
SELECT ID, EMP.NAME, DTE.StartDate, DTE.ENDDATE, year
FROM
EMP_DATE DTE join
EMP_INFO EMP on EMP.ID = DTE.ID join
YEAR YR on YR.YEAR = YEAR(DTE.STARTDATE)
DATA SAMPLE:
EMP
ID NAME
1 JOHN
EMP_INFO
ID STARTDATE ENDDATE
12013-10-24 2014-03-11
12014-06-13 2014-03-11
12014-06-15 2014-03-11
12014-09-08 2014-03-11
12014-09-12 2014-03-11
12014-09-14 2014-03-11
12014-01-13 2014-05-17
12014-05-14 2014-06-09
12014-06-10 2014-06-16
12014-08-31 2014-09-04
12014-09-05 2014-09-06
12014-09-07 2014-10-23
YEAR
Year
2012
2013
2014
2015
I have a table with a list of jobs along with their start and end datetime values.
I am looking for a function which will return the time taken to process a job using a start date and an end date. If the date range covers a Saturday or Sunday I want the time to ignore the weekends.
Example
Start Date=2014-05-15 12:00:00.000
End Date=2014-05-19 13:00:00.000
Total Time should be: 2 Days, 1 Hour and 0 Minutes
This function will return working hours between given 2 dates. This function assumes that the break is between 9:45 AM and 10 AM and that Lunch is between 12:30 PM and 1 PM. This function also assumes that the working hours are between 7:30 AM and 4 PM. There is a section for public holidays there. We have a table for that you might not so that piece needs to be fixed.
CREATE function [dbo].[fnc_myHinkley_ASSY_CalcWorkingMinutes] (@StartDate datetime, @EndDate datetime)
RETURNS decimal(14,2)
/*
Programmer: Goran Borojevic
Date: 5/14/2014
This function will return working hours between given 2 dates. This function assumes that the break is between 9:45 AM and 10 AM and that Lunch is between 12:30 PM and 1 PM. This function also assumes that the working hours are between 7:30 AM and 4 PM.
*/
AS
BEGIN
--check if one of the dates is null
if @StartDate is null or @EndDate is null
RETURN 0
[code]...
currently need to re-create an aggregate table in a proc every night to aggregate purchases broken down by person/store in groups of 3, 6 12 etc months.finding the performance of it is very slow as it covers 500,000 million rows.The query looks like
SELECTCusID(int)
, StoreID(int)
, SUM(L3M) as Last3Months
, SUM(L6M) as Last6Months
, SUM(L9M) as Last9Months
[code]...
I need to make changes to this because it is using a BETWEEN on a datetime column. I was wondering though, if anyone else has made agg tables like this before an found a better way of doing them?
What I need to be able to find is any records where the Discontinue_Date is greater than the Effective_Date on the next row for a given Customer ID and Part_ID. This is a customer pricing table so the Discontinue_Date of row 53 for example should never be greater than the Effective_Date of row 54130, these are the records I'm looking to find. So I'm looking for a SELECT query that would look for any records where this is true. Obviously the last Discontinue_Date row for a Customer_ID will not have a next row so I wouldn't want to return that.
View 9 Replies View RelatedI have a table with appdt as first appointment date and the another record for the same customer# has follow up appointment.
Each customer is uniquely identified by a customer#
I need to find out if the customer came back after 200 days or more when the first appointment date was between jan12014 and Aug 31 2014. I am only interested in first follow up appointment after 30 days or more.
How can i do that in a query?
To set the scene I am using SQL 2012, in project deployment mode (SSIS Catalog rather than file system).I have setup an SSIS package to run a stored procedure which exports data for the last hour to a .tsv file and then FTP's the file to some other location via a sql agent job - This all works fine.However, I can see there may be a requirement to run the package with dates that need to be set i.e. in the event of a lost file of some other reason the package has not run and missed some of its hourly slots and the customer requires the files to be resent.
The stored procedure I am using has parameters for "DateOverride" - boolean), "start" and "end" dates (datetime) with defaults set "0" for "DateOverride" and null for the "Start" and "End" dates, I have built logic into the procedure which sets the dates if the parameters are null (as in the above to an hour before now). What I would like to be able to do (and this is to make it user friendly for support staff) is to be able to set parameters/variables in SQL agent with "DateOverride" set to "1" and the the dates I would like to be sent to the stored procedure "Start" and "End" parameters.
I did try using the parameters in SSIS which worked well when the values were true or false (0,1) but didn't work at all for the dates. If I left the dates as I had set them is SSIS it worked, but if I changed them (even if it was just changing the hour) the job errored/crashed and corrupted the job step leaving me the ability to only delete it.
I need a Query for calculating the fiscal_week based on the input dates (start_date and end_date), though I got a query from this forum, it is not giving me exact result.
the sample is in the excel file with the attachment.
In the excel:
First tab tells you the raw_data what I am using to find the Fiscal_week
Second tab tell you the data where i found the mistake, and how I am expecting the output.
I also have attached the query I have got from this forum, query I have modified for fiscal week.
I have a table full of service invoice records. Some of the invoices are continuous, meaning that there may be an invoice from 01-16-2015 through the end of that month, but then another invoice that starts on feb 1 and goes for 6 months.
I want to only pull the most recent. Keep in mind that there may be other invoices in the same table for a different period. An example might be:
FromDate ToDate Customer Number Contract Number
02/01/2015 07/31/2015 2555 456
01/15/2015 01/31/2015 2555 456
04/01/2013 09/30/2015 2555 123
03/13/2013 03/31/2013 2555 123
From this table, I would like a query that would give me this result:
01/15/2015 07/31/2015 2555 456
03/13/2013 09/30/2015 2555 123
There will likely be more than just 2 consecutive records per contract number.
I am looking to calculate no of months between two dates which are in YYYYMM format.
Like no of months between 201505 and 201305
I've been struggling with this for some time. we have to group data based on Patients admission date and discharge date. If any Patients discharge date + 1 = admission date then we have group both rows into one row and sum costs from both the rows. Please check out the sample input and expected output for details.
Sample Input
PatientID AdmissionDate DischargeDate Cost
1009 27-07-2014 31-07-2014 1050
1009 01-08-2014 23-08-2014 1070
1009 31-08-2014 31-08-2014 1900
1009 01-09-2014 14-09-2014 1260
1009 01-12-2014 31-12-2014 2090
1024 07-06-2014 28-06-2014 1900
1024 29-06-2014 31-07-2014 2900
1024 01-08-2014 02-08-2014 1800
Expected Output
PatientId AdminssionDate DischargeDate Cost
1009 27-07-2014 23-08-2014 2120
1009 31-08-2014 14-09-2014 3160
1009 01-12-2014 31-12-2014 2090
1024 07-06-2014 02-08-2014 6600
Please Use the below script to generate the source table and fill them up with the sample data.
--Create Table
CREATE TABLE PatientProblem
(
PatientID INT,
AdmissionDate DATETIME,
DischargeDate DATETIME,
Cost MONEY
[Code] ......
I'm using SQL Server 2012 and I need to run a query against my database that will output the difference between 2 dates (namely, DateOfArrival and DateOfDeparture) into the correct month column in the output.
Both DateOfArrival and DateOfDeparture are in the same table (let's say GuestStay). I will also need some other fields from this table and do some joins on some other tables but I will simplify things so as to solve my main problem here. Let's say the fields needed from the GuestStay table looks like below:
I need my query to output in the following format:
How to write this query?