I'm using SQL Server 2012 Analysis services in Tabular mode and connected to Oracle Database and while importing, I'm getting below error after importing some rows.
OLE DB or ODBC error: Accessor is not a parameter accessor.. The current operation was cancelled because another operation in the transaction failed.
Hello Guys,
I am currently experiencing a Sql error: operation cancelled by user.
I don't know where this error come from. Is it from ADO.NET or SQL Server 2000.
This error doesn't always occur. It only occurs when many users access the web site. I want to know who issue the error. Why issue the error.
Let me know if you have any ideas
Thanks in advanced
When attempting to update or delete data using Microsoft Access, this error often occurs. The data can be updated or deleted directly through SQL Server and the problem is not resolved by closing and restarting access. The tables accessed have primary keys.
Any ideas?
It occurrs with both Access 2 and Access 95.
When I highlight a few
partitions and start processing, the process occasionally stops with a
message that operation has been canceled, like this:
Response 3
Server: the operation has been cancelled.
Response 4
Server: the operation has been cancelled.
Response 5
Server: the operation has been cancelled.
..etc...
(no further error message details are provided)
SQL profiler shows that batch was completed (but rowcount shown in process progress log is too small).
Analysis
Services profiler shows no messages at that time at all. It just shows
messages when it started, and when I restarted the processing.
The Analysis trace appears to be stopped when processing stops with "Server: the operation has been cancelled."This
is an occasional error and sometime occurs within 15-20 minutes from
starting to process. It could fail on 1st partition in the process list
, or on some partition in the middle. Some partitions might run for a
few hours and not error out, but sometimes it fails quickly.I was not sure if this is an issue with the underlying fact data, so I broke up the last partition where it failed into 5 smaller partitions, they processed OK separately.I think restarting SQL Server and SSAS helps to process a few more partitions. Some that failed with this problem process OK after restart, but some fail again.
(apologies for re-posting, wanted to put under more specific thread title)
Distributed transactions were happily running between our SQL servers and then we installed Windows 2003 Server SP2 and all of a sudden we got this nice error message when attempting a remote data update via linked servers. I couldn't even run "BEGIN DISTRIBUTED TRANSACTION" without getting the error message. The full error message is:
"Enlist operation failed: 0x8004d00e(XACT_E_NOTRANSACTION). SQL Server could not register with Microsoft Distributed Transaction Coordinator (MSDTC) as a resource manager for this transaction. The transaction may have been stopped by the client or the resource manager."
Apparently, SP2 disables network DTC access (how nice, I feel more secure knowing that my data can't be updated remotely anymore).
Solution:
From Control Panel | Add or Remove Programs | Add Remove Windows Components
Select "Application Server" and click the "Details" button
Check "Enable network DTC access" and click OK for however many prompts it takes to apply the changes.
****NOTE**** this change WILL SHUT DOWN SQL SERVER so plan accordingly (this would have been handy to know in advance since I ran it in the middle of the workday and everyone got disconnected).
Hope this helps!
I received this error when I tried to change the Authentication mode from windows to windows and sql server. a window popped for sa password and i put my password and the error pops. im using sql server 2005.can help?
View 3 Replies View RelatedHello,
We are getting this error when a user clients any report. they can see the directories OK, but when we upload a new report the error still happens.
Error is "Operation is not valid due to the current state of the object."
Any ideas?
Thanks
Michael
Good morning,
I have created a very simple report that works correctly when in Report Designer Preview mode. When I deploy to the report server it reports that deployment was successful. When I log into Report Manager the report is visible, but when I click on it I end up at an error page.
The error that I get is:
Operation is not valid due to the current state of the object.
Appreciate any help on this.
Thanks
Stuart
I want to create subscription for a report.
While creating it gives error "Operation is not valid due to the current state of the object".
I am able to create subscription for other reports deployed. But it gives error for subscription of a particular report.
Tried deploying the report with other name then too it does not allow me to create subscription.
I have a On_hand_Quantity report which has a parameter drop down to select about 200 stores.
When i run this report in BI studio , selecting all the 200 stores for the parameter it works fine.
But when i upload the same report to report manager and try selecting all the store_numbers it errors out saying 'operation cannot run due to current state of the object ' This report was running fine since the past 2 years, on 30th dec we did some .NET updates (KB2656356 and KB2656351) after which this report stopped working.
I tried troubleshooting all ways but it errors out only in report manager.
hello,
I have a problem where I am calling the BCP utility to write a table to a file. I then need to delete the rows of the table. but not all of them. This all works fine. I've been asked to place this into a transaction..incase a piece fails. When I do that...SQL server hangs. I must shutdown SQL Server.
Any idea why that would happen. I am using the xp_cmdshell stored procedure to invoke bcp utility within a stored procdure. The procedure is executed every 15 minutes to provide files to an outboard system.
Salik.
I am working on sql server 2008. I have a database , flooded with GBs of data in each days.
I back up the database and trying to restored it on another server.
But the operation failed.
Dim srv As New Server(".SQLEXPRESS")'
srv.ConnectionContext.ConnectionString =connection string
Dim bk As New Backup
bk.Action = BackupActionType.Database
bk.Database = application path+""+databaseName+".mdf"
Dim bdi As New BackupDeviceItem(backuppath+""+databasename+ ".bak", DeviceType.File)
bk.Devices.Add(bdi)
bk.Initialize = True
bk.Incremental = False
bk.SqlBackup(srv)
This is a pretty standard procedure for doing backups. For some reason I am getting 'Failed to connect to server. Cannot open user default database. Login failed' for MachineNameAdministrator' error message.
This error message appears when the application is loaded on to windows 2003 machine. However I have been able to do one backup on this machine in the last 2 days, so there appears to be some erratic behaviour. I am able to connect to the server to read the last database backup date (This function also occasionallly fails to connect to the server.)
This login failure does not seem to be present when I load this application on XP machines.
When i execute a sql statment, i get this error:
System.Data.SqlClient.SqlException: Execution of a full-text
operation failed. A clause of the query contained only ignored words.
i tryed to execute same statment in sql query analyzer...in analyzer it
works, but in .net returns this error. Have anybody any clue how to fix
this error?
i'm using ms sql database, SqlDataAdapter and datatable.
Hi
I am getting the following error while creating the Full Text catalogs.
Execution of a full-text operation failed. 'No such interface supported' (Microsoft SQL Server, Error: 7689)
The Full Text Search service is running and had no problems earlier.
I am getting an error about "Cannot perform a shrinkfile operation inside a user transaction", but I don't have a shrinkfile command in my procedure. Does SQL hang on to that command if it was received earlier in a different procedure?
View 5 Replies View RelatedHi,
I am facing the below mentioned error:
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a].
I have a Insert statement which i am using to insert data into a remote server from my local server. I have added the remote server as a linked server in my local server but when i try to execute the statement i am getting the above mentioned error. I am using Windows Enterprise Edition 2003 and SQL Server 2000.
I have also enabled the Allow InBound and Allow OutBound in the security configuration of My Computer properties but still i am facing the same problem. Kindly let me know how to resolve this issue.
Thanks.
I got the backup failed with error 665.
We have a scheduled weekly full backup job running through maintenance plan. We are using Sql 2008r2. Our backup server is windows 2008R2. There is plenty of space in the backup server but still my database full backup failed with the following error.
Executing the query "BACKUP DATABASE [Test] TO DISK = N'C:fullbackup." failed with the following error: "Write on "C:fullbackup est_backup_2015_04_12_200003.bak" failed: 665(The requested operation could not be completed due to a file system limitation) BACKUP DATABASE is terminating abnormally.
Hi.
I get the following error
Quote: Execution of a full-text operation failed. A clause of the query contained only ignored words.
because I try to search words that are 2 characters like "me" or like " on "
why can't I use words that are 2 characters in sql query by using the contains function?
I have a data file listing open and close hours for the day of the week. I need to format it like
Mon-Thurs 7:00 AM - 5:00 PM
Fri 8:00 AM - 5:00 PM
Sat 8:00 AM - 1:00 PM
Sun Closed
Here is what the data looks like now.
Mon OpenMon ClosedTue OpenTue ClosedWed OpenWed ClosedThu OpenThu ClosedFri OpenFri ClosedSat OpenSat ClosedSun OpenSun Closed
7:30 AM5:30 PM7:30 AM5:30 PM7:30 AM5:30 PM7:30 AM5:30 PM7:30 AM5:30 PMClosed Closed
7:00 AM6:00 PM7:00 AM6:00 PM7:00 AM7:00 PM7:00 AM6:00 PM7:00 AM6:00 PM8:00 AM5:00 PMClosed
There seems like I would end up 5 lines max?
Hello, I've a problem with a software developed in C# with the framework 2.0. This is the error I receive : The operation could not be performed because OLE DB provider "SQLNCLI" for linked server "XXX_LINKED_SERVER" was unable to begin a distributed transaction. OLE DB provider "SQLNCLI" for linked server "XXX_LINKED_SERVER" returned message "No transaction is active.". If I try directly to restart the process, it works fine. Is there someone who can help me ? This is the process 1. In C# --> Call of a Query : select from the linked server (db in sql 2005) and insert into a table SQL 2005 2. In the C# --> using (TransactionScope scope = new TransactionScope()) and insert in a table in SQL 2005 which is link server Thank in advance.
View 1 Replies View RelatedI execute the code below
declare @LastDate datetime
SELECT @LastDate = max([LastUpdate])
FROM [exhibitor].[dbo].[blgBelongs]
WHERE (([Table1]=@module1 OR [Table2]=@module2 )or ([Table2]=@module1 OR [Table1]=@module2 )
AND Exists (SELECT [Table1],[Table1ID] FROM [exhibitor].[dbo].[blgBelongs] WHERE table2=30 and table2ID=@dmn_ID))
Before I see @LastDate , I see this warning
Warning: Null value is eliminated by an aggregate or other SET operation.
In a t-sql 2012 query that will be updated in a stored procedure I am getting the following warning message:
Warning: Null value is eliminated by an aggregate or other SET operation. I would like to get rid of this warning missing without just turning off the warning messages.
I would like to change the sql so that it does not occur. The following is my new sql that generates the warning:
case when (coalesce(a.status,ae.status) = 'A') and (IsNull(ae.excuse, 'U') = 'U') and (IsNull(ae.code, 'DRC') = 'DRC') then
sum(DATEDIFF(minute,pm.startTime,pm.endTime)-coalesce(pm.lunchTime,0)-coalesce(a.presentMinutes,0)) else 0 end as DRCMinutes,
The sql is part of a select statement.
Why the Indexes on table slow down the DML operation on table, what is the exact reason?
View 5 Replies View RelatedI am running SQL Server 7. I have an user that need to run the Set Identity On a table, and he gets an error message:
Server: Msg 8104. The current user is not the database or object owner of table 'tpartners'. Cannot perform SET operation.
I can grant this user with DBO user role, then he can edit anyting on the database.
Is there a work around that he can run the Set cmd and I don't need to grant him the DBO user role?
HiI have a database with full recovery model.Every night at 11.00pm performs full backup, and dayly every 3 hoursperforms differential backup, and trasnactional log backup performsevery 15 minutes during a day.I am interested what operations i can not recover from log ordifferential backup.I saw that when i drop table i can recover it from log backup, but isthere some operation that can not be recoverThanks a lotAlex*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedDear friends, I was not able to find any perfect toolbox item to use "not in" operation on my selected columns, also how can we use multiple join conditions in the merge join item? Thanks,
View 1 Replies View RelatedWhy do I get the message "Operation can't be completed?" when I try to save a stored procedure!!! When I create a new stored procedure and copy the code into it it works fine!
View 2 Replies View RelatedI have a sp that creates a #temp table and performs a bulk insert.
CREATE TABLE #template (template varchar(8000))
EXEC ('bulk INSERT #template FROM "' + @filename + '"')
SET @html = (SELECT template FROM #template)
DROP TABLE #template
...
When I access this sp with any other user than 'sa' I get this error message:
The current user is not the database or object owner of table '#template'. Cannot perform SET operation.
I've been everywhere (with no success) in the sql srv admin to look for the appropriate check box to allow another named user to access this sp.
Can anyone help?
On SQL 2k, How can I set my DTS package, which imports a 3 million row .TXT file to a table, as a NON-LOGGED operation?
(LOGGING is taking tooooo long!! I will be sure to run a full DB backup when the job completes.)
thx-
BT
If tables are in relation (foreign key), then how should one proceed for deletion of a record from a master table?
how will the database itself tackle the problem? What should be done from the front end for this?
please help.......I urgently require a solution for this.
I was looking into some of the System stored procedures like sp_denylogin, sp_grantLogin etc. I found bit wise operations like
update master.dbo.sysxlogins set xstatus = (xstatus & ~1) | 2, xdate2 = getdate()
where name = @loginame and srvid IS NULL
How does the bitwise NOT(~) works with different datatypes like INT, SMALLINT and TINYINT?
Look at the following sample code and result. I just wanted to understand how it works with int and smallint
declare @a int
declare @b smallint
declare @c tinyint
select @a = 1, @b = 1, @c = 1
select @a=~@a, @b= ~@b, @c= ~@c
select @a, @b, @c
Result
~~~~~
-2-2254
Thanks in advance
Gnana
IDENTITY_INSERT is already ON for table 'Elbalazo.dbo.DeliveryOption'. Cannot perform SET operation for table 'City'
Here's my entire script:
--------------------------------------------------------------------
/*Disable Constraints & Triggers*/
exec sp_MSforeachtable 'ALTER TABLE ? NOCHECK CONSTRAINT ALL'
exec sp_MSforeachtable 'ALTER TABLE ? DISABLE TRIGGER ALL'
/*Perform delete operation on all table for cleanup*/
exec sp_MSforeachtable 'DELETE ?'
/*Enable Constraints & Triggers again*/
--exec sp_MSforeachtable 'ALTER TABLE ? CHECK CONSTRAINT ALL'
exec sp_MSforeachtable 'ALTER TABLE ? ENABLE TRIGGER ALL'
/*Reset Identity on tables with identity column*/
exec sp_MSforeachtable 'IF OBJECTPROPERTY(OBJECT_ID(''?''), ''TableHasIdentity'') = 1 BEGIN DBCC CHECKIDENT (''?'',RESEED,0) END'
-- City
SET IDENTITY_INSERT City ON
INSERT INTO Elbalazo.dbo.City (
[CityID]
,[CityName]
,[CountyID]
,[Active])
SELECT [CityID],[CityName],[CountyID],1
FROM [ElbalazoProduction].dbo.tbl_City
SET IDENTITY_INSERT City OFF
-- State
SET IDENTITY_INSERT [State] ON
INSERT INTO Elbalazo.dbo.State (
[StateID]
,[State]
,[Active])
SELECT [StateID],[State],1
FROM [ElbalazoProduction].dbo.tbl_State
SET IDENTITY_INSERT [State] OFF
-- NumberOfPeopleOption
SET IDENTITY_INSERT NumberOfPeopleOption ON
INSERT INTO [Elbalazo].[dbo].[NumberOfPeopleOption]
([NumberOfPeopleOptionID]
,[NumberOfPeopleNameOption]
,[Active])
SELECT [NumberOfPeopleID], [NumberOfPeopleName],1
FROM [ElbalazoProduction].dbo.tbl_NumberOfPeople
SET IDENTITY_INSERT NumberOfPeopleOption OFF
-- DeliveryOption
SET IDENTITY_INSERT DeliveryOption ON
INSERT INTO [Elbalazo].[dbo].[DeliveryOption]
([DeliveryOptionID]
,[DeliveryOptionName]
,[Active])
SELECT [DeliveryOptionID], [DeliveryOptionName],1
FROM [ElbalazoProduction].dbo.tbl_DeliveryOption
SET IDENTITY_INSERT DeliveryOption OFF
-- User
SET IDENTITY_INSERT [User] ON
INSERT INTO [Elbalazo].[dbo].[User]
([UserID]
,[FirstName]
,[LastName]
,[Address1]
,[Address2]
,[CityID]
,[StateID]
,[Zip]
,[PhoneAreaCode]
,[PhonePrefix]
,[PhoneSuffix]
,[Email]
,[CreateDate]
,[Active])
SELECT [CustomerID]
,[FirstName]
,[LastName]
,[AddressLine1]
,NULL
,[CityID]
,[StateID]
,[Zip]
,[PhoneAreaCode]
,[PhonePrefix]
,[PhoneSuffix]
,[EmailPrefix] + '@' + [EmailSuffix]
,[CreateDate]
,1
FROM [ElbalazoProduction].dbo.tbl_Customer
SET IDENTITY_INSERT [User] OFF
-- EntreeOption
SET IDENTITY_INSERT EntreeOption ON
INSERT INTO [Elbalazo].[dbo].[EntreeOption]
([EntreeOptionID]
,[EntreeOptionName]
,[Active])
SELECT [EntreeOptionID]
,[EntreeOptionName]
,1
FROM [ElbalazoProduction].dbo.tbl_EntreeOption
SET IDENTITY_INSERT EntreeOption OFF
-- CateringOrder
SET IDENTITY_INSERT CateringOrder ON
INSERT INTO [Elbalazo].[dbo].[CateringOrder]
([CateringOrderID]
,[UserID]
,[NumberOfPeopleID]
,[BeanOptionID]
,[TortillaOptionID]
,[CreateDate]
,[Notes]
,[EventDate]
,[DeliveryOptionID])
SELECT [CateringOrderID]
,[CustomerID]
,[NumberOfPeopleID]
,[BeanOptionID]
,[TortillaOptionID]
,[CreateDate]
,[Notes]
,[EventDate]
,[DeliveryOptionID]
FROM [ElbalazoProduction].dbo.tbl_CateringOrder
SET IDENTITY_INSERT CateringOrder OFF
-- CateringOrder_EntreeItem
SET IDENTITY_INSERT CateringOrderEntreeItem ON
INSERT INTO [Elbalazo].[dbo].[CateringOrderEntreeItem]
([CateringOrderEntreeItemID]
,[CateringOrderID]
,[EntreeItemID])
SELECT [CateringORder_EntreeItemID]
,[CateringOrderID]
,[EntreeItemID]
FROM [ElbalazoProduction].dbo.tbl_CateringOrder_EntreeItem
SET IDENTITY_INSERT CateringOrderEntreeItem OFF
select * from BeanOption
select * from CateringItemIncluded
select * from CateringOrder
select * from CateringOrderEntreeItem
select * from CateringOrderEntrees
select * from City
select * from Country
select * from DeliveryOption
select * from EntreeOption
select * from NumberOfPeopleOption
select * from [State]
select * from [User]