SQL 2012 :: DB Backup Failed Because Of Error 9002
Aug 12, 2014
SQL server 2012, SP1
DB is in SIMPLE recovery mode (total size 124 GB). Log file Initial size is 650 MB auto growth set for 500 MB.
Below is the error I am facing.
Could not clear 'DIFFERENTIAL' bitmap in database 'DBSAPCAD' because of error 9002. As a result, the differential or bulk-logged bitmap overstates the amount of change that will occur with the next differential or log backup. This discrepancy might slow down later differential or log backup operations and cause the backup sets to be larger than necessary. Typically, the cause of this error is insufficient resources. Investigate the failure and resolve the cause. If the error occurred on a data backup, consider taking a data backup to create a new base for future differential backups.
A nonrecoverable I/O error occurred on file "//SQLDIFF/SAPCAD_DBSAPCAD.bak:" 995(The I/O operation has been aborted because of either a thread exit or an application request.).BACKUP DATABASE is terminating abnormally.
In the weekend we faced an error on the DB backup.Drive K got full because of database log file grown and we have 4 MB free space left. I have no option to increase the drive space nor the log file size.
I am unable to perform, full or differential backup for this db.
On the SQL Server the Event Viewer shows the same messages and errors every evening between 22:05:00 and 22:08:00. The following information messages are shown for every database:
"I/O is frozen on database <database name>. No user action is required. However, if I/O is not resumed promptly, you could cancel the backup."
"I/O was resumed on database <database name>. No user action is required."
"Database backed up. Database: <database name>, creation date(time): 2003/04/08(09:13:36), pages dumped: 306, first LSN: 44:148:37, last LSN: 44:165:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'{A79410F7-4AC5-47CE-9E9B-F91660F1072B}4'}). This is an informational message only. No user action is required."
After the 3 messages the following error message is shown for every database:
"BACKUP failed to complete the command BACKUP LOG <database name>. Check the backup application log for detailed messages."
I have added a Maintenance Plan but these jobs run after 02:00:00 at night.
Where can I find the command or setup which will backup all databases and log files at 22:00:00 in the evening?
I use the Transact-SQL BACKUP statement in Visual Basic to backup my local MSSQL Database. It give me this error
Error 3041
BACKUP failed to complete the command BACKUP DATABASE [BCFPC] to BCFPCBKP
I already created a backup device called BCFPCBKP and it is backup to the disk.
I tried to run the same BACKUP statement in SQL Query Analyzer and it worked fine. I tried to run my VB application in another PC. It worked fine when i use this command remotely. Can anyone tell me what's the problem?
I am getting this error in my SQL Server 2005 server. It is saying that one of my databases transaction log file is full, but I am a little confused.
I googled this the other day and found a threat here, but I was having problems with the search function. I wasn't getting anything back. Hate to repost.
Anyway, the DB is in simple recovery mode. The disk that it is on has plenty of space; 80+gigs.
I cannot recall the T-SQL command to be able to query of sys.databases to find infor on 'log_reuse_wait_desc' (I am really new to SQL).
Does anyone have some suggestions and help? Can someone help me with the t-sql command to use against sys.databases?
Server: Msg 9002, Level 17, State 2, Procedure spPFW_Get_Financial_Data, Line 145 [Microsoft][ODBC SQL Server Driver][SQL Server]The log file for database 'tempdb' is full. Back up the transaction log for the database to free up some log space.
When I use the tools/backup database it will not let me select backup transaction log or fails the bacup of the tempdb database with a msg saying : 'Backup and restore operations are not allowed on database tempdb'
One of my database transaction log backup jobs failed this morning, although the log backup was still taken, the job reported failure. The job has run successfully a number of times since. The job reported a primary key violation error on the msdb.dbo.backupmediaset table. The full error message was
Violation of PRIMARY KEY constraint 'PK__backupme__DAC69E4D599F1693'. Cannot insert duplicate key in object 'dbo.backupmediaset'. The duplicate key value is (401862). Msg 3009, Level 16, State 1, Server myservername, Line 1
Could not insert a backup or restore history/detail record in the msdb database. This may indicate a problem with the msdb database. The backup/restore operation was still successful.
After investigating the backupset and backupmediaset tables in msdb I can see that value used for the failed insert was used previously for the last database log backup in the previous log backup run. The failure was reported for the first database log backup attempted. The SQL Log shows an entry for the log being backed up successfully.
I have checked the identify value in the backupmediaset table using DBCC CHECKIDENT and all looks OK.
Hi,I keep getting this error message for a trans.log backup.Operating system error112(error not found).The disk has about 6GB space free, and the backup should only take upabout 550 MB, so I would think it is not space related but...The disk is NTFS.Any ideas?
My application returns the following error when a SQL call is made during a transaction log backup. Cannot open database requested in login 'login_name'. Login fails.
Has anyone come accross this problem before? or maybe worked around it?
Had a recent drive failure on or server. Subsequently Our sql database failed to backup. Ran dbcc checkdb and got the following errors:
Msg 8966, Level 16, State 2, Line 1 Unable to read and latch page (1:241724) with latch type SH. 1(Incorrect function.) failed.
Msg 2533, Level 16, State 1, Line 1 Table error: page (1:241724) allocated to object ID 370100359, index ID 3, partition ID 868679827259392, alloc unit ID 868679827259392 (type In-row data) was not seen. The page may be invalid or may have an incorrect alloc unit ID in its header.
I'm trying to create a maintenance plan to backup one of my databases however it's failing and I'm receiving the below erorr.I am able to back up other databases without issue to the same location and I have sysadmin permissions.
Message Executed as user: W2K8SQLSYSTEM. ...ion 9.00.5000.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:13:53 AM Progress: 2014-09-02 10:13:54.01 Source: {A7AE97F0-9186-4385} Executing query "DECLARE @Guid UNIQUEIDENTIFIER EXECUTE msdb..sp".: 100% complete End Progress Progress: 2014-09-02 10:13:54.35
I am creating my first SSIS package, simple, I read a file, a computation and then write it to an excel.
I am getting the message: "Test connection failed because of an error in initializing provider." The database is NOT remote. My computer is slow though. after about 10 or 15 seconds after clicking the button to test my connection, I get the message and much more. The message asks me if the instance name is correct. I don't know what this would be. This message is on the first task, reading the file (finding the file).
The last sentence of the long message is: "Named pipes provider: Could not open a connection to SQL Server (2).
My question is: Why am I getting this message and what do I need to do to resolve this problem?
I have created some packages in visual studio and run the packages from there and they all run fine. I have then imported the THEM in SQL Integration services Catalogues and run the packages individually and they all run successfully.When I tried to create the job to run the packages in a scheduled job I get the following error messages: Backup database error: failed to lock variable "RunID" for access with error 0xc001001 "The variable cannot be found. This occurs when an attempt is made to retrieve a variable from the variable collection on a container during execution of the package and the variable is not there.....
Backup database error. The execute method on the task. Backup database returned code 0x80131904 (Login failed for user 'loginname' The execute method must succeed and indicate the result using an "out" parameter.
Using SQL Server 2005 Server Management Studio, I attempted to back up a database, and received this error:
Backup failed: System.Data.SqlClient.SqlError: Backup and file manipulation operations (such as ALTER DATABASE ADD FILE) on a database must be serialized. Reissue the satement after the current backup or file manipulation is completed (Microsoft.SqlServer.Smo)
Program location:
at Microsoft.SqlServer.Management.Smo.Backup.SqlBackup(Server srv) at Microsoft.SqlServer.Management.SqlManagerUI.BackupPropOptions.OnRunNow(Object sender)
Backup Options were set to:
Back up to the existing media set
Overwrite all existing backup sets
I am fairly new to SQL 2005. Can someone help me get past this issue? What other information do I need to provide?
Using Ola Hallengren's scripts I do a full backup of a database on a Sunday. Then differential backups every 6 hours and log backups every hour. I would like to keep a full week of backups based off the full backup done on Sunday. Is there a way for me to clear out the diff and log folders after the successful full backup on Sunday nights?
I'm looking to schedule a maintenance plan for my databases which I have done.I'd like this database to be copied to another folder and the name altered to include the file name and the current date time stamp.Is this possible in the scheduled maintenance plan?
I have database with unlimited growth in Data with 2MB growth and Log File with 1MB growth. The continuous data is inserted with min 20KB per minute. We struct with following error and Log file size is too large (85GB) than Data file(20GB). Now server is not allowing to take backup as diskspace is not available.
Msg 9002, Level 17, State 2, Procedure DumpData, Line 10 The transaction log for database '%DB' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases
Please help me to resolved the issue and let me know hints to shrink LOG file. Data inserted are using ADO applications that uses some insert/select stored procedures that does not have begin transaction-Commit Transaction block as appliction issues the Commit over connection object.
I scheduled automatic backup process but its only showing backup of the only one .sql file in the backup folder. Other created .sql files are not backed up. Why is it so?
I've built SSIS package and made a job to execute it automatically but it always returns an error. The job returns OK but when we looked at the Log File viewer, it conatins this error log :
Key not valid for use in specified state
Failed to decrypt protected XML node "DTS Password" with error
What's wrong with the package ? Thanks in advance.
I have log shipping set up between 2 SQL 2000 SP1 Servers on Win 2000. The db is small 10 meg, and when the restore job on the backup server fails I am getting "sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed." as the message, the maint paln on the primary server show no error. Anyone seen this before? The restore has worked 3 out of 5 times
Many a times see the below error in SQL Error log.
Login failed for user 'NT AUTHORITYANONYMOUS LOGON'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: ]
Is this something to do here?
Note: If I run the below statement I know that the SQL Error log entry will go off, but wanted to know the real significance of this error?
CREATE LOGIN [NT AUTHORITYANONYMOUS LOGON] FROM WINDOWS
I have a re-indexing stored procedure,yester day night it got failed "Executed as user: CONNECTSRVmyadmin. sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed." what may be the reason..
What dose this error mesage mean? The Microsoft Tape Format (MTF) soft filemark database on backup device 'VbLSADBMCBACKUPvatt_cequest_backup.BAK' cannot be read, inhibiting random access. [SQLSTATE 42000] (Error 3266) Backup or restore operation terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed
Guys, When I try backup database, I see error message:
Can't open dump device 'C:mssqlBACKUPest.DAT', device error or device off line. Please consult the SQL Server error log for more details. (Message 3201)
I am running our CRM and, for the first time, tried running backups today. I'm getting the following error:
TITLE: Microsoft SQL Server Management Studio ------------------------------
Backup failed for Server 'XXXXX'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Backup+Server&LinkId=20476
System.Data.SqlClient.SqlError: An error occurred while processing 'BackupMetadata' metadata for database id 5 file id 65538. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&LinkId=20476
------------------------------ BUTTONS:
OK ------------------------------
This is our live database, so I have to be careful with what I do. Some googling hasn't really helped. dbcc shows nothing. I've since tried removing the full text catalogs (that's what the file_id references in sys.database_files), but the 65538 file_id remains. So, if anyone knows how I can get around this to backup my data, I'd love to know.
I Scheduled a job to take a backup@everyday 11:00P.M.This job fails and showing the following error.
SQL Server Scheduled Job 'DB Backup Job for DB Maintenance Plan 'LA'' (0x77C06CE237C0B4418CF661ADF98FEC43) - Status: Failed - Invoked on: 2008-04-30 08:12:47 - Message: The job failed. The Job was invoked by User DMN1fisc-sql-svc. The last step to run was step 1 (Step 1).
I Scheduled to run a job at every day@11P.M.The job has been failing every day.This is the error message...
SQL Server Scheduled Job 'DB Backup Job for DB Maintenance Plan 'LA'' (0x77C06CE237C0B4418CF661ADF98FEC43) - Status: Failed - Invoked on: 2008-05-01 23:00:03 - Message: The job failed. The Job was invoked by Schedule 200 (Schedule 1). The last step to run was step 1 (Step 1).
Yestarday night we had a log backup failure at 3.00 AM on a sql server 2000. After that the hourly log backup's went on smoothly.
When I checked the sql server logs , it showed me the error:
Backup Disk File:Create Media:Backup Device 'D:mssqlackupvmwarevmware_log' failed Operating system error=32 ( The process cannot access the file because it is being used by another process)
I tried to google it , but could not get a good answer.
