An inherited SSIS (2012) solution displays the following messages when I try opening it in VS 2012:
"One or more projects in the solution were not loaded correctly."
Then another message displays
"The encrypted data in the project manifest failed to load. The project manifest is corrupted or the project was encrypted by another user."
SQL 2012 - Convert BIDS project and DTUTIL cannot load the package I just converted a really simple 2008 BIDS project to 2012 and 2012 dtutil will not load it. Tried 32 bit and 64 bit dtutil.
Get the following error message.
'count not load package "c: empSSISPackage.dtsx" because of error 0x80131534. Description: the package failed to load due to error 0x80131534 "<null>". This occurs when CPackage::LoadfromXML fails.
I can Import the package in SQL Manager, and I can deploy it using the manifest and the deployment wizard. But DTUTIL chokes on it. It is the dtsx right from 2012 Bids build.
dtutil /DestS ficertx2x /FILE C:empRelease2012CreateSSISPackage.dtsx /COPY SQL;/MYTestPackage /QUIET
Hi Everyone,
I've just finish re-installing VS.NET 2005 and tried the Walkthrough: Displaying Data in a Web Forms Page
I followed exactly as it is that is I tested the connection "Connection Sucessful", test Query "Successfull" but when i run it prompt me with the following error message:
-------------------------------------------------------------------------------------------------
Failed to find or load the registered .Net Framework Data Provider.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Configuration.ConfigurationErrorsException: Failed to find or load the registered .Net Framework Data Provider.
Source Error:
[No relevant source lines]
Source File: c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Filesw9f240aab3a2217cc8App_Web_cztxhfge.0.cs Line: 0
Stack Trace:
[ConfigurationErrorsException: Failed to find or load the registered .Net Framework Data Provider.]
System.Data.Common.DbProviderFactories.GetFactory(DataRow providerRow) +1374119
System.Data.Common.DbProviderFactories.GetFactory(String providerInvariantName) +109
System.Web.UI.WebControls.SqlDataSource.GetDbProviderFactory() +63
System.Web.UI.WebControls.SqlDataSource.GetDbProviderFactorySecure() +19
System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +120
System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17
System.Web.UI.WebControls.DataBoundControl.PerformSelect() +149
System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70
System.Web.UI.WebControls.GridView.DataBind() +4
System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82
System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69
System.Web.UI.Control.EnsureChildControls() +87
System.Web.UI.Control.PreRenderRecursiveInternal() +41
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +6931
System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +213
System.Web.UI.Page.ProcessRequest() +86
System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context) +18
System.Web.UI.Page.ProcessRequest(HttpContext context) +49
ASP.default_aspx.ProcessRequest(HttpContext context) in c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Filesw9f240aab3a2217cc8App_Web_cztxhfge.0.cs:0
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +303
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64
------------------------------------------------
please help and point out what is the issue?
Thanks in advance for your help.
We have an SSAS project that we want to auto deploy. I am not sure how to handle the external data sources in the project. This one in particular has a single external data source defined to Microsoft SQL Server.
I would like to be able to change the data source based on the environment. In SSIS projects I can do this by setting up environments in the SSISDB and linking them to project parameters in the SSIS project but SSAS projects don't seem to have a similar mechanism.
How to handle this? I would like to be able to have the build/deployment agent pass in server / database information to the data source based on environment (dev, QA, production).
The only way to automate this that I've discovered is to have an intermediary process that executes after the build that updates the generated .asdatabase and .configsettings files in the bin folder replacing the connection string information.
Hello
I have recently downloaded Orcas beta VS product and had no previous version of VS before. The install went clean and I have been able to generate Window apps and web apps with very little issues; however, I have one issue with running a web app using the "view in browser" option for checking an aspx page for validity. If I use the default Northwind database provided and generate an aspx form using the "DataSet" toolbox widget, the tool prompts for the datasource etc. required to generate the required code. I can select the Northwind database and select the desired columns from one of the tables. Once completed, I build the project (clean build) and then select the "view in browser" option to verify the results. The result is an error page indicating a server error ->
Failed to find or load the registered .Net Framework Data Provider.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Configuration.ConfigurationErrorsException: Failed to find or load the registered .Net Framework Data Provider.
I created on odbc connection to an iSeries(as400) box and was successfull in displaying the table on the webpage! I looked into the web.config file and it appears that all the required XML data is present. Any help would be appreciated as I am fairly green when it comes the .NET world.
Thanks
We have a file import job. This job typically imports millions of records into a SQL2008 DB. After the load the DB performance goes down the drain. Thus far, their solution has been to rebuild indexes on effected tables. I'd like to come up with a better solution. My guess is that after the load, the statistics are shot until the next stats update.
What is the best way to handle this scenario? There must be some way to keep the stats current during a big data load.
I want to load historical data from an old system into a new one.Thing is, that old system stored dates as Datetime and the new one uses DateTimeOffset.
All data was collected in the same Time Zone... but with the Daylight Saving Time (DST)
The offset is either +04:00 or +05:00, based on the calendar date. To add to the complexity, the rules for DST changed a couple of years ago.
To determine the offset, I'd need to know what was or would have been the server Timezone for each historical date.
Hi,
We have a problem with adding existing RDL file to a Report Server Project. In fact, the RDL file has been made on another computer using Reporting Services 2005 and Analysis Services 2005. So the data comes from an OLAP cube.
When the RDL file is added to the project we lose the MDX query once going to the "Data" tab page. It happens only when we copy the file over to another computer.
We checked the XML before opening the file, and the MDX query is in the file where it is supposed to be. The file has been created using Visual Studio 2005, SP1 patched in a Report Server Project.
Anyone else got this problem?
Thanks!
Is there a switch I can use to force a bulk insert and if data is truncated, I'm good with that. The truncated data, in this case, is not data I can use anyway if it is long enough to be truncated.
I need to keep the field at VARCHAR(23) and if I expand it, I won't be able to join on it after the file load completes. I'd like the data to be inserted (truncated if need be) and then I'll deal with the records that are truncated after I load the file.
Sorry for the ultra noob question...I just installed SQL Server 2005 and I'm trying to open the AdventureWorks database. I don't have a server setup so I can't make a connection when the program starts up. I have all the files for the AdventureWorks DB, but I can't figure out how to open it. Do I need to have a connection? Is there a way to open the DB without it?Thanks very much!
View 2 Replies View RelatedHow to write Stored Procedures to load the Data Model from OLTP to DWH ?
View 9 Replies View RelatedHello
SQL Server 2000 Enterprise Edition SP3
I have an application which uses a login with an encrypted password. Everything works well, no errors in the application.
My SQL Server errorlogs keeps recording:
Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.
I know this message is related to the login with the encrypted password (tracked it with Profiler)
My question: Is it normal that the error log tracks this message because the password is encrypted?
Many thanks!
Worf
Hi, I am trying to lean ASP.NET. So I was trying to install SQL Server too. But, I could not install. The aleart box popped up:
"SQL Server set up cannot install files to the compressed or encrypted folder: C:Program FilesMicrosoft SQL Server"
Before this, I also got a warning that the hardware of my computer does not meet the hardware requirement.
I would like to know how I can install SQL Server into my computer. Or, shouldn't I do that? To learn ASP.NET I want to have a database ready. If I can not use SQL Server, I may try Access or something smaller...
Thanks in advance.
yyokota2
I am unable to load data from flat file to sql table using bulk insert sql statement
My code:-
DECLARE @filePath VARCHAR(200)
DECLARE @sql VARCHAR(8000)
Declare @filename varchar(100)
set @filename='CCNVZ_150401054418'
SET @filePath = 'I:IncomingFiles'+@FileName+'.txt'
[Code] .....
I have an encrypted database in server A. The reporting service is running on server B. I deployed all my reports to Server B. When I run the reports, I got the following message:
The report server cannot decrypt the symmetric key that is used to access sensitive or encrypted data in a report server database.
I googled the problem, some said to backup the key, but when I opened the reporting service configuration tool to backup the encrypted, it said I needed to restore the key first. Some said I need to delete the key, but that defeated the purpose of an encrypted database.
Hi,
In BI Tool SSIS Packages run fine and get data From Oracle and Save it in SQL Server.
Package Protection Level is EncryptSensitivewithPassword.
In BI tool when i open the package it ask password and then run fine.
If i change the Protection Level to Dont save Sensitive,
It does not run fine in even BI tool.
It is fine if i use EncryptSensitivewithPassword.in BI Tool and run it.
Now the problem is that i need to run this package through SQL Job.
so Job give error
"Failed to decrypt an encrypted XML node because the password was not specified or not correct. Package load will attempt to continue without the encrypted information."
Please i need help ?
Thanks
It is possible to create Analysis Services project (*.dwproj) in Visual Studio 2012 Data Tools?
View 5 Replies View RelatedI have idea on SMK, DMK and symmetric and asymmetric keys. I have also idea on TDE. But Is there any way to encrypt all the records of all the columns of a table in a database? actually I need to encrypt the database. Someone .... thinks that when someone will write select query he will get the encrypted records. As per as I am concerned it is not possible. I can encrypt the specific column using symmetric or other keys...
Is there any software or any tool which will provide encrypted records of database?
I am executing a stored procedure in one database (Database1) that pulls data from another database (Database2) that is the back end for a third party application. Some of the fields in that other database are now encrypted. I need to decrypt those fields but since the query is running in a database other than where the data lives (which is also where the symmetric key + cert lives), I am getting the following error: "Cannot find the symmetric key" Below is an example of what I am running in the stored procedure:
OPEN SYMMETRIC KEY [XXXXKey] DECRYPTION
BY CERTIFICATE [XXXX_CERT];
select CONVERT(Varchar(50), DECRYPTBYKEY( <ENCRYPTED FIELD> ))
FROM Database2.dbo.TABLE1
CLOSE SYMMETRIC KEY [XXXXKey];
What do I need to add to Database1 so the stored procedure can decrypt the data it pulls from Database2?
I have inherited a database and looking to upgrade it from 2008 to 2014. I have imported the database into db projects but it has flagged warning s straight away because one of the previous contractors has created a bunch of stored procs with encryption.
View 0 Replies View RelatedI decided to delete the encryption key.After that when I go to the reporting page, the report cannot connect to the datasource.
An error has occurred during report processing. (rsProcessingAborted)
Cannot create a connection to data source 'xxxxx'. (rsErrorOpeningConnection)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
What do I suppose to do?
I have a customer who is looking to encrypt their applications connection to the back-end SQL server. I've gotten a valid certificate for the server from a trusted CA, and it's installed on the server (shows up in Personal certificates in the Certificate MMC when selecting the computer) and I can choose it in the drop down on the certificates tab of the SQL Network protocols properties in Configuration Manager.
Now, my question: If I select the certificate but do NOT enable the "Force Encryption" option, the client will be able to request encryption on their end, and the connection will then be encrypted. If the client (other applications) do NOT request encryption, they will still be able to connect, but their connection will be un-encrypted. URL....
Lastly, I could've swore I had found some information indicating that some methods of establishing a connection to SQL can fail when Force Encryption is enabled, as the method doesn't support SSL encryption.
Hi,
Here I will describe my problem.
1. We are loading large amount of data from database on background thread which is starting on Application_start event in global.aspx.cs file.The data is later cached for subsquent request to improve the performance.
2. Now when we put the application on web farm garden, it is not able to load the application.
3. We are sending the request the servers through Router kind of application.
4 This application is working fine on single server enviornment.
Please help us.
Ajay Kumar Dwivedi
I am doing a Case statement to create a unified field for account type and vendor, in the code below I am receiving the error in the subject, because the account numbers have alpha characters in the string, I need to make them as OTHER if the first 2 left chars are Alpha, I thought how I have ISNUMERIC would do that but I am still getting the error.
I am also including example of how the account_numbers are formatted.
R222209
R222220
R222222
R222212
R221123
F707768
[Code] .....
Hello,
I have a big problem and i'm not able to find any hint on the Network.
I have a window2000 pc, VS2005,II5 and SQLServer 2005(dev edition)
I created an SSIS Package (query to DB and the result is loaded into an Excel file) that works fine.
I imported the dtsx file inside my "Stored Packages".
I would like to load and run the package programmatically on a Remote Scenario using the web services.
I created a solution with web service and web page that invoke the web service.
When my code execute:
Microsoft.SqlServer.Dts.Runtime.Application.LoadFromDtsServer(packagePath, ".", Nothing)
I got the Error:
Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.
The error message doesn't help so much and there is nothing on the www to give me and advice....
Is it a SSIS problem???
Thank you for any help!!
Marina B.
I just have done the SSIS example in the tutorial document included when install SQL 2005 ENT. I have a problem that whenever I test to run, the service load all data from source with out noticing about the data (I mean it load all the data to the destination), I do it several time and it continue to load all without checking. That mean the data is dublicated when the schedule run???
I think there should be a paramete or something like that to help the engine just load the new data to the destination. Could you help please?
Thank
Hello,
I've created a Report Model Project that can be used by Report Builder to generate ad-hoc reports. I'm trying to create a connection string in my Report Server Project that points to the Report Model Project data source view.
All I can do is create a regular datasource, which bypasses the metadata contained in the Data Source View.
Basically I want my Report Server Project and my Report Builder reports to leverage the same metadata. Is this possible? If so how do I get the connection string?
Thanks!!
-Matt
Hi! I installed SQL Server on my server today and im new to it. I configured it and now im trying to make a SQL Server Project with my other computer... Then the program asks for some account information to logon to a database on the server. Then i fill it out and i get this error: Login failed for user "anaxyd". The user is not associated with a trusted SQL Server connection.
View 7 Replies View RelatedHi All,
Whenever I try to execute sp_xml_preparedocument I
get the following error:
Msg 6610, Level 16, State 1, Procedure sp_xml_preparedocument, Line 1
Failed to load Msxmlsql.dll.
We have SQL Server 2005 SP2
running on
Windows Server 2003 R2 SP2
This is killing us right now.
Can anyone help?
Cheers,
Geoff
For some reason in a Team Foundation Team Project that has multiple project types (SSRS, SSIS, WebSite, C# Business DLL...), the SSIS project makes itself the startup project to the team project. If I explicitly set another project as the startup project to the team project and then select an SSIS package in the SSIS project in the team project, the SSIS project becomes the startup project automatically.
I am using Visual Studio 2005 SP1.
Greetings all,
After moving all my packages to a new server, win2K3, SQL2k5, non of the SSIS packages run. They all ran fine on the other server.
The error is
"2006-03-07 13:09:38 - ! [LOG] Step 1 of job 'ExportXML' (0x4E0C7495EFE4034FA6EF94B7C7F77262) cannot be run because the SSIS subsystem failed to load. The job has been suspended"
These packages ran perfectly on the old system.
Running the package manually, using DTExec or from the Saved Packages tree in SQL is fine.
Package is saved in SQL.
Any ideas?
Hi all,
I may have a requirement to send data from a SQL Server at site A to an Oracle server at site B. These sites have no network connection between them, and the current suggestion is to use ftp, but the transfer (or username and password) will not be encrypted.
If I create a DTS package transferring data from site A, will that transfer be encrypted?
If not, is there an option with SQL Server DTS to ensure that the data is sent in an encrypted form?
Thanks in advance.
Hi,
How can I save encryped data in SQL2000? Also, how can I retrieve it?