SQL 2012 :: Error (backup Failed To Complete The Command BACKUP LOG) In Event Viewer
Aug 23, 2013
On the SQL Server the Event Viewer shows the same messages and errors every evening between 22:05:00 and 22:08:00. The following information messages are shown for every database:
"I/O is frozen on database <database name>. No user action is required. However, if I/O is not resumed promptly, you could cancel the backup."
"I/O was resumed on database <database name>. No user action is required."
"Database backed up. Database: <database name>, creation date(time): 2003/04/08(09:13:36), pages dumped: 306, first LSN: 44:148:37, last LSN: 44:165:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'{A79410F7-4AC5-47CE-9E9B-F91660F1072B}4'}). This is an informational message only. No user action is required."
After the 3 messages the following error message is shown for every database:
"BACKUP failed to complete the command BACKUP LOG <database name>. Check the backup application log for detailed messages."
I have added a Maintenance Plan but these jobs run after 02:00:00 at night.
Where can I find the command or setup which will backup all databases and log files at 22:00:00 in the evening?
View 9 Replies
ADVERTISEMENT
Aug 4, 2007
Backup failed to complete the command backup database [ ] TO VIRTUAL DEVICE = ' { 853D3FC0 - 45EA -85B1 - 54F0EA379CAC } 24 ' WITH SNAPSHOT , BUFFERCOUNT = 1 , BLOCKSIZE = 1024
View 1 Replies
View Related
Feb 28, 2007
One of my SQL Servers (SQL 2000 SP4) is reporting this error in the Maintenance Plan. But shortly after it shows this error is does successfully backup my Databases (per log history), however the plan is indicating "failure".
I have no idea how to resolve this nor why it is happening.
Rob.
View 1 Replies
View Related
Aug 12, 2014
SQL server 2012, SP1
DB is in SIMPLE recovery mode (total size 124 GB). Log file Initial size is 650 MB auto growth set for 500 MB.
Below is the error I am facing.
Could not clear 'DIFFERENTIAL' bitmap in database 'DBSAPCAD' because of error 9002. As a result, the differential or bulk-logged bitmap overstates the amount of change that will occur with the next differential or log backup. This discrepancy might slow down later differential or log backup operations and cause the backup sets to be larger than necessary. Typically, the cause of this error is insufficient resources. Investigate the failure and resolve the cause. If the error occurred on a data backup, consider taking a data backup to create a new base for future differential backups.
A nonrecoverable I/O error occurred on file "//SQLDIFF/SAPCAD_DBSAPCAD.bak:" 995(The I/O operation has been aborted because of either a thread exit or an application request.).BACKUP DATABASE is terminating abnormally.
In the weekend we faced an error on the DB backup.Drive K got full because of database log file grown and we have 4 MB free space left. I have no option to increase the drive space nor the log file size.
I am unable to perform, full or differential backup for this db.
View 9 Replies
View Related
Feb 9, 2004
Hi,
I use the Transact-SQL BACKUP statement in Visual Basic to backup my local MSSQL Database. It give me this error
Error 3041
BACKUP failed to complete the command BACKUP DATABASE [BCFPC] to BCFPCBKP
I already created a backup device called BCFPCBKP and it is backup to the disk.
I tried to run the same BACKUP statement in SQL Query Analyzer and it worked fine. I tried to run my VB application in another PC. It worked fine when i use this command remotely. Can anyone tell me what's the problem?
Thanks in advance
regards,
M.Y. Yap
View 2 Replies
View Related
Oct 6, 2015
When I execute the following transaction log backup TSQL in SSMS
BACKUP LOG ProductDB
TO DISK = 'D:Database_BackupTransProductDB.trn';
I get this error:
Msg 3201, Level 16, State 1, Line 2
Cannot open backup device 'D:Database_BackupTransProductDB.trn'. Operating system error 21(The device is not ready.).
Msg 3013, Level 16, State 1, Line 2
BACKUP LOG is terminating abnormally.
I also have a daily database backup job that puts the backup file under this directory.
D:Database_BackupData
So I changed the path to this and it still fails.
BACKUP LOG ProductDB
TO DISK = 'D:Database_BackupDataProductDB.trn';
However if I change it to this path, it works:
BACKUP LOG ProductDB
TO DISK = 'MyServerDataProductDB.trn';
This turns out to be the path I used a few weeks back when I backed up the log for the very first time. But I now wanted to store my transaction log backups in D:Database_BackupTrans.
View 10 Replies
View Related
Jun 9, 2015
I am running backups on SQL Sever express and I take backups via the batch file executing the TSQL as below. This works perfectly fine, I just need to be able to spool out the backup completion log. What TSQL command can I use to do that?
My batch file looks like this:
@echo off
sqlcmd -S SERVER01 -E -i H:master_scriptsTOM_FAM_log.sql
Which will the call the TOM_FAM_log.sql :
DECLARE @name VARCHAR(50) -- database name
DECLARE @path VARCHAR(256) -- path for backup files
DECLARE @fileName VARCHAR(256) -- filename for backup
DECLARE @fileDate VARCHAR(20) -- used for file name
SET @path = 'H:BackupTOM_FAM'
[Code] ....
Usually if we schedule the backups using the maintenance plan, we can chose reporting options that can spool the result of the backup to a text file. What is the T-SQL for the spool report to a text file.
This option produces a file that writes logs with the details I posted below. I would like to do the same or similar using T-SQL in my code.
Microsoft(R) Server Maintenance Utility (Unicode) Version 11.0.3000
Report was generated on "SERVER01".
Maintenance Plan: Backup logs
Duration: 00:00:00
Status: Succeeded.
[Code] ....
View 1 Replies
View Related
Jul 11, 2007
Using SQL Server 2005 Server Management Studio, I attempted to back up a database, and received this error:
Backup failed: System.Data.SqlClient.SqlError: Backup and file manipulation operations (such as ALTER DATABASE ADD FILE) on a database must be serialized. Reissue the satement after the current backup or file manipulation is completed (Microsoft.SqlServer.Smo)
Program location:
at Microsoft.SqlServer.Management.Smo.Backup.SqlBackup(Server srv)
at Microsoft.SqlServer.Management.SqlManagerUI.BackupPropOptions.OnRunNow(Object sender)
Backup Options were set to:
Back up to the existing media set
Overwrite all existing backup sets
I am fairly new to SQL 2005. Can someone help me get past this issue? What other information do I need to provide?
View 11 Replies
View Related
Jun 17, 2014
One of my database transaction log backup jobs failed this morning, although the log backup was still taken, the job reported failure. The job has run successfully a number of times since. The job reported a primary key violation error on the msdb.dbo.backupmediaset table. The full error message was
Violation of PRIMARY KEY constraint 'PK__backupme__DAC69E4D599F1693'. Cannot insert duplicate key in object 'dbo.backupmediaset'. The duplicate key value is (401862).
Msg 3009, Level 16, State 1, Server myservername, Line 1
Could not insert a backup or restore history/detail record in the msdb database. This may indicate a problem with the msdb database. The backup/restore operation was still successful.
After investigating the backupset and backupmediaset tables in msdb I can see that value used for the failed insert was used previously for the last database log backup in the previous log backup run. The failure was reported for the first database log backup attempted. The SQL Log shows an entry for the log being backed up successfully.
I have checked the identify value in the backupmediaset table using DBCC CHECKIDENT and all looks OK.
DBCC CHECKIDENT ('backupmediaset',NORESEED)
Is there anything else I need to check?
View 6 Replies
View Related
Feb 19, 2015
Using Ola Hallengren's scripts I do a full backup of a database on a Sunday. Then differential backups every 6 hours and log backups every hour. I would like to keep a full week of backups based off the full backup done on Sunday. Is there a way for me to clear out the diff and log folders after the successful full backup on Sunday nights?
View 2 Replies
View Related
Dec 29, 2014
I'm looking to schedule a maintenance plan for my databases which I have done.I'd like this database to be copied to another folder and the name altered to include the file name and the current date time stamp.Is this possible in the scheduled maintenance plan?
View 4 Replies
View Related
Aug 11, 2002
Hi,
My application returns the following error when a SQL call is made during a transaction log backup.
Cannot open database requested in login 'login_name'. Login fails.
Has anyone come accross this problem before? or maybe worked around it?
Cheers
Luke
View 1 Replies
View Related
Jul 6, 2015
Had a recent drive failure on or server. Subsequently Our sql database failed to backup. Ran dbcc checkdb and got the following errors:
Msg 8966, Level 16, State 2, Line 1
Unable to read and latch page (1:241724) with latch type SH. 1(Incorrect function.) failed.
Msg 2533, Level 16, State 1, Line 1
Table error: page (1:241724) allocated to object ID 370100359, index ID 3, partition ID 868679827259392, alloc unit ID 868679827259392 (type In-row data) was not seen. The page may be invalid or may have an incorrect alloc unit ID in its header.
[Code] .....
View 5 Replies
View Related
Apr 14, 2004
Hi I am getting the following error:
Event Type: Error
Event Source: MSSQLSERVER
Event Category: (2)
Event ID: 17052
Date: 4/14/2004
Time: 09:32:05 AM
User: SYSTEM
Computer: BSEW2k01
Description:
Error: 50000, Severity: 5, State: 1
Error Calling StatusToStreet In DCS0 Code 7202
Please help.
Thanks
View 2 Replies
View Related
Dec 28, 2005
Hi,I keep getting this error message for a trans.log backup.Operating system error112(error not found).The disk has about 6GB space free, and the backup should only take upabout 550 MB, so I would think it is not space related but...The disk is NTFS.Any ideas?
View 2 Replies
View Related
Mar 19, 2007
Facundo writes "Hi:
How can i add a timestamp to a generated file of a complete database backup, the idea is to archive full database backups using the date to identified it.
Thanks a lot.
FB"
View 1 Replies
View Related
Nov 3, 2014
I scheduled automatic backup process but its only showing backup of the only one .sql file in the backup folder. Other created .sql files are not backed up. Why is it so?
View 5 Replies
View Related
Mar 6, 2001
Hi All,
I see this error message on one of my servers Event Viewer..Can anyon tell me what it means and how to resolve it..
The library file "C:WINNTSystem32BEPerfDll.dll" specified for the "Backup Exec" service could not be opened. Performance data for this service will not be available. Status code is data DWORD 0.
Thanks,
Venu
View 1 Replies
View Related
Jul 23, 2005
I have a stored procedure that I use for call a aspx page from within SQL. The stored procedure itself runs finewith no errors but I keep getting errors in the event viewer everytimeit runs (with .vbs, .NET, .vb6 client) outside Enterprise manager or SQL Query Analyzer.....This is error:Error: 0, Severity: 19, State: 0SqlDumpExceptionHandler: Process 52 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process.I think that this is the same problem seen inhttp://www.sqlmonster.com/Uwe/Forum...in-Event-ViewerI've test with XP sp2, W2003 server, SQL 2000 sp3a......on the same machine.ANY SUGGESTIONS??????Thanks--Message posted via http://www.sqlmonster.com
View 3 Replies
View Related
Feb 24, 2015
I have the need to delete old backup files via TSQL job. Found this solution online:
PushD "
emoteservershareDIFF" &&(
forfiles -m *DIFF*.sqb -d -1 -c "cmd /c del /q @path"
) & PopD
It works remotely if I run it via command prompt. But when I add this to a TSQL job on my remote SQL instance, it runs without deleting anything. What I'm missing?
View 6 Replies
View Related
Sep 1, 2014
I'm trying to create a maintenance plan to backup one of my databases however it's failing and I'm receiving the below erorr.I am able to back up other databases without issue to the same location and I have sysadmin permissions.
Message
Executed as user: W2K8SQLSYSTEM. ...ion 9.00.5000.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 10:13:53 AM Progress: 2014-09-02 10:13:54.01 Source: {A7AE97F0-9186-4385}
Executing query "DECLARE @Guid UNIQUEIDENTIFIER
EXECUTE msdb..sp".: 100% complete End Progress Progress: 2014-09-02 10:13:54.35
[Code] .....
View 4 Replies
View Related
Nov 8, 2015
There is a lot of documention concerning data(base) backups, but I could not find information about how to backup a complete SQL Server instance (data + configuration) or the SQL server configuration (= everything, that is not user payload). you always re-configure your system after restoring, especially because you will forget some settings?I found following things necessary to backup configuration:
server-wide:
security: login, roles, ...
server objectsserver properties (e.g. collation, connection or memory settings; see SSMS "Server - Properties")
per database
database settings (SSMS - database - properties)scheme
1. Is there anything missing?In case of a severe system crash I would like to be able to recover the system using a full system image of the virtual machine. However I just create these images after significant changes (e.g. Windows service pack).The SQL server should be backuped independently from these system images.
2. Even if I used SQL Server maintenance plan, choose "backup all databases" and additionally backup resources DB manually I think, that some configuration is still missing, right? Where are the security configuration and server properties saved? In my system database there are some tables, but there is very little content inside, so that the data from the views INFORMATION_SCHEMA* and sys.* obviously is not saved there.SQL Server system objects, such as sys.objects, are physically persisted in theResource database, but they logically appear in the sys schema of every database. URL....What does that mean: Are all DB/table schemes, logins, ... saved in resource DB?
3. Does a usual SQL Server full database backup also contain all settings concerning this database (database properties, logins, ...)?
4. Is there at least a way to backup ONLY the configuration (server-wide and database) without data? The only tool I could find is DACPAC, that exports a database's scheme and some other configuration, but e.g. the database properties are not included: By default, the database created during the deployment will have the default settings from the CREATE DATABASE statement. The exception is that the database collation and compatibility level are set to the values from the source database. URL..
View 9 Replies
View Related
Jul 11, 2014
I'm trying to backup my databases to another backup server though I'm receiving the attached error.
the SQL service is logged on as "Network Service"
View 7 Replies
View Related
Nov 6, 2015
I need to copy a just-created bak file to another drive after the backup task has completed. I don't see anything in the job toolbox which works with file system operations like this. But still it must be a common need..There are ways to script this or use third part tools but I am looking for something native to the sql server 2012 SSMS toolset, if possible.
An alternate approach would be to run the backup job again, after the main backup, and change the destination to the alternate location. But I was thinking that another backup job would probably invoke more overhead on the server than a simple file copy operation. If I do end up taking this approach I could also use the cleanup task to toss older bak files in the alt dir.
View 7 Replies
View Related
Aug 8, 2007
Hello,
I have MS SQL 2005 server with 300+ databases on it. The application is set up that way that it creates a new database as needed (dynamically). Do not ask me why - I hate this design... So, it can create 3-4 databases a day (random time).
I've scheduled full backup of all databases to run once at night, and it runs just fine. Besides that, I have scheduled tran logs backup of all databases to run every hour. This backup fails from time to time with the following error:
Executing the query "BACKUP LOG [survey_p0886464_test] TO DISK = N'D:\backups\log backups\survey_p0886464_test_backup_200708072300.trn' WITH NOFORMAT, NOINIT, NAME = N'survey_p0886464_test_backup_20070807230002', SKIP, REWIND, NOUNLOAD, STATS = 10
" failed with the following error: "BACKUP LOG cannot be performed because there is no current database backup.
BACKUP LOG is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
So, I think what happens is since my full backup of all databases are scheduled to run only once at night, and tran logs every hour, when new database is created during the day, there is no full backup for it, that is why tran logs backup fails. Becuase after the failure, if I run full backup again, then tran log runs just fine afterwards.
I am new to MS SQL Server, I am mostly working with Sybase IQ. Do you know if I can "trigger" full backup every time when new database created to avoid tran lof failure?
Or is it possible to schedule full backup to run if tran log backup fails?
Any advice will be much appreciated.
View 1 Replies
View Related
Feb 4, 2015
is it possible that this error during backup caused Sort Warning???
I sent to support of our Storage and he make result that this caused jobs which have Sort Warning....
if I checked this error on internet, i found problem with Storage or it can be also lot of fullscan and etc.
So it can be also that Order By caused some reading directly from disk and not from memory ? maybe if there is using tempdb right ?
View 3 Replies
View Related
Oct 21, 2005
hi,
newby dba.
have a maintenenace plan and job to do transactino log backup
it shows as failed with event 208 from step 1. In the sql log it just says transaction log backed up .. .no errror. There is a file from the backup too as expected ... not sure if it is the correct size etc (only 80k) how do I check that?
Saw a message on the web about quoted identifiers being off causing the maintenance proc to fail- add parameter -SupportComputedColumn to the end of the call. I have done this even though this may not be the cause.
I want to try it out to see if it works, but can I do a transaction log backup whilst users are on the database?
Any other opinions on how to get around the 208 error would be greatly apprciated.
cheers
View 3 Replies
View Related
Mar 1, 2004
Has anyone explored a process whereby the Transaction Log would be backup up based upon a defined threshold, ie. 75% full? All the research against news group posts and SQL2000 literature seems to point to scheduling a log backup job on a periodic basis. My workflow isn't 24 hour consistant and even adjusting the interval during the day isn't a good answer when the multiple databases on a server fill their logs at different rates.
View 8 Replies
View Related
Jul 20, 2005
Has anyone explored a process whereby the Transaction Log would bebackup up based upon a defined threshold, ie. 75% full? All theresearch against news group posts and SQL2000 literature seems topoint to scheduling a log backup job on a periodic basis. My workflowisn't 24 hour consistant and even adjusting the interval during theday isn't a good answer when the multiple databases on a server filltheir logs at different rates.
View 1 Replies
View Related
Jan 31, 2008
Hi there
I'm getting this message on my third automated backup of the transaction logs of the day. Both databases are in full recovery mode, both successfully backed up at 01.00. The transaction logs backed up perfectly happily at 01:30 and 05:30, but failed at 09:30.
The only difference between 05:30 and 09:30's backups is that the log files were shrunk at 08:15 (the databases in question are the ones that sit under ILM2007, and keeping the log files small keeps the system running better).
Is it possible that shrinking the log files causes the database to think that there hasn't been a full database backup?
Thanks
Jane
View 3 Replies
View Related
Nov 2, 2007
Hi all,
Can we get the event properties by using a query?
Are there any extended stored procuder to get the above?
Scenario:
>Desktop>Right Click on My Computer
>Go to Manage and click
>Expand System Tools
>Expand Event Viewer
>Application
click on one event.We can get the log info which is the manual procudure.
But now i want to get the event properties through the Query analyzer...
Any help would be great?
Thanks,
View 4 Replies
View Related
Jul 23, 2005
Hi,One of our backup jobs failed this morning but nothing got written intowin nt application event log. This way our MOM 2005 couldn't generatean alert on this event since mom inspetcs application event log forthat purpose (event id 17055). I see backup errors about 10 days ago inthe appl log. What could have caused that? Any help will beappreciated.Stan
View 1 Replies
View Related
Jan 3, 2008
Hi,
I run the follow command to backup the database log file after a full database backup.
backup log supl_pzhou2 to supl_pzhou2_log
and got the following message.
Processed 3 pages for database 'supl_pzhou2', file 'SUPL_Log' on file 2.
BACKUP LOG successfully processed 3 pages in 0.485 seconds (0.049 MB/sec).
The problem is, the log file .ldf is still the same size after the backup log command. it is 14GB.
THe datafile is only 2GB in size.
How do I write the backup log command properly so the log file can get truncated?
Thanks in advance.
Pingx
View 6 Replies
View Related
